Last modified by Mengting Qiu on 2025/04/07 16:25
<
From version < 64.2 >
edited by Xiaoling
on 2022/06/07 17:14
To version < 74.14 >
edited by Xiaoling
on 2022/06/07 17:52
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -67,22 +67,29 @@
67 67  
68 68  
69 69  
70 -
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
74 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
76 +)))
78 78  
78 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
80 +)))
80 80  
82 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
84 +)))
82 82  
86 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
88 +)))
84 84  
90 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
92 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -210,7 +210,9 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
220 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
222 +)))
214 214  
215 215  [[image:1654592697690-910.png]]
216 216  
... ... @@ -218,11 +218,17 @@
218 218  
219 219  == 2.3 ​Uplink Payload ==
220 220  
230 +(((
221 221  LSPH01 will uplink payload via LoRaWAN with below payload format: 
232 +)))
222 222  
234 +(((
223 223  Uplink payload includes in total 11 bytes.
236 +)))
224 224  
238 +(((
225 225  Normal uplink payload:
240 +)))
226 226  
227 227  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
228 228  |(((
... ... @@ -306,13 +306,17 @@
306 306  
307 307  === 2.3.6 Message Type ===
308 308  
324 +(((
309 309  For a normal uplink payload, the message type is always 0x01.
326 +)))
310 310  
328 +(((
311 311  Valid Message Type:
330 +)))
312 312  
313 313  
314 314  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
315 -|**Message Type Code**|**Description**|**Payload**
334 +|=**Message Type Code**|=**Description**|=**Payload**
316 316  |0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
317 317  |0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
318 318  |0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
... ... @@ -344,12 +344,21 @@
344 344  
345 345  == 2.5 ​Show Data in DataCake IoT Server ==
346 346  
366 +(((
347 347  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
368 +)))
348 348  
370 +(((
371 +
372 +)))
349 349  
374 +(((
350 350  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
376 +)))
351 351  
378 +(((
352 352  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
380 +)))
353 353  
354 354  
355 355  [[image:1654592790040-760.png]]
... ... @@ -372,9 +372,13 @@
372 372  [[image:1654592856403-259.png]]
373 373  
374 374  
403 +(((
375 375  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
405 +)))
376 376  
407 +(((
377 377  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
409 +)))
378 378  
379 379  
380 380  [[image:1654592878525-845.png]]
... ... @@ -397,8 +397,10 @@
397 397  === 2.6.1 Before measurement ===
398 398  
399 399  (((
432 +(((
400 400  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
401 401  )))
435 +)))
402 402  
403 403  
404 404  
... ... @@ -405,24 +405,45 @@
405 405  === 2.6.2 Measurement ===
406 406  
407 407  
442 +(((
408 408  (% style="color:#4f81bd" %)**Measurement the soil surface:**
444 +)))
409 409  
446 +(((
410 410  [[image:1654592946732-634.png]]
448 +)))
411 411  
450 +(((
412 412  Choose the proper measuring position. Split the surface soil according to the measured deep.
452 +)))
413 413  
454 +(((
414 414  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
456 +)))
415 415  
458 +(((
416 416  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
460 +)))
417 417  
462 +(((
418 418  Put soil over the probe after insert. And start to measure.
464 +)))
419 419  
466 +(((
467 +
468 +)))
420 420  
470 +(((
421 421  (% style="color:#4f81bd" %)**Measurement inside soil:**
472 +)))
422 422  
474 +(((
423 423  Dig a hole with diameter > 20CM.
476 +)))
424 424  
478 +(((
425 425  Insert the probe inside, method like measure the surface.
480 +)))
426 426  
427 427  
428 428  
... ... @@ -452,9 +452,13 @@
452 452  
453 453  == 2.7 Calibration ==
454 454  
510 +(((
455 455  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
512 +)))
456 456  
514 +(((
457 457  After stable, user can use below command to calibrate.
516 +)))
458 458  
459 459  [[image:image-20220607171149-4.png]]
460 460  
... ... @@ -461,7 +461,7 @@
461 461  
462 462  (% style="color:#037691" %)**Calibration Payload**
463 463  
464 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
523 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
465 465  |(((
466 466  **Size**
467 467  
... ... @@ -481,7 +481,6 @@
481 481  Always 0x03
482 482  )))
483 483  
484 -
485 485  User can also send 0x14 downlink command to poll the current calibration payload.
486 486  
487 487  [[image:image-20220607171416-7.jpeg]]
... ... @@ -490,6 +490,8 @@
490 490  * Reply to the confirmation package: 14 01
491 491  * Reply to non-confirmed packet: 14 00
492 492  
551 +
552 +
493 493  == 2.8 Frequency Plans ==
494 494  
495 495  (((
... ... @@ -499,32 +499,61 @@
499 499  
500 500  === 2.8.1 EU863-870 (EU868) ===
501 501  
562 +(((
502 502  (% style="color:blue" %)**Uplink:**
564 +)))
503 503  
566 +(((
504 504  868.1 - SF7BW125 to SF12BW125
568 +)))
505 505  
570 +(((
506 506  868.3 - SF7BW125 to SF12BW125 and SF7BW250
572 +)))
507 507  
574 +(((
508 508  868.5 - SF7BW125 to SF12BW125
576 +)))
509 509  
578 +(((
510 510  867.1 - SF7BW125 to SF12BW125
580 +)))
511 511  
582 +(((
512 512  867.3 - SF7BW125 to SF12BW125
584 +)))
513 513  
586 +(((
514 514  867.5 - SF7BW125 to SF12BW125
588 +)))
515 515  
590 +(((
516 516  867.7 - SF7BW125 to SF12BW125
592 +)))
517 517  
594 +(((
518 518  867.9 - SF7BW125 to SF12BW125
596 +)))
519 519  
598 +(((
520 520  868.8 - FSK
600 +)))
521 521  
602 +(((
603 +
604 +)))
522 522  
606 +(((
523 523  (% style="color:blue" %)**Downlink:**
608 +)))
524 524  
610 +(((
525 525  Uplink channels 1-9 (RX1)
612 +)))
526 526  
614 +(((
527 527  869.525 - SF9BW125 (RX2 downlink only)
616 +)))
528 528  
529 529  
530 530  
... ... @@ -545,48 +545,94 @@
545 545  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
546 546  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
547 547  
637 +
638 +
639 +
548 548  === 2.8.3 CN470-510 (CN470) ===
549 549  
642 +(((
550 550  Used in China, Default use CHE=1
644 +)))
551 551  
646 +(((
552 552  (% style="color:blue" %)**Uplink:**
648 +)))
553 553  
650 +(((
554 554  486.3 - SF7BW125 to SF12BW125
652 +)))
555 555  
654 +(((
556 556  486.5 - SF7BW125 to SF12BW125
656 +)))
557 557  
658 +(((
558 558  486.7 - SF7BW125 to SF12BW125
660 +)))
559 559  
662 +(((
560 560  486.9 - SF7BW125 to SF12BW125
664 +)))
561 561  
666 +(((
562 562  487.1 - SF7BW125 to SF12BW125
668 +)))
563 563  
670 +(((
564 564  487.3 - SF7BW125 to SF12BW125
672 +)))
565 565  
674 +(((
566 566  487.5 - SF7BW125 to SF12BW125
676 +)))
567 567  
678 +(((
568 568  487.7 - SF7BW125 to SF12BW125
680 +)))
569 569  
682 +(((
683 +
684 +)))
570 570  
686 +(((
571 571  (% style="color:blue" %)**Downlink:**
688 +)))
572 572  
690 +(((
573 573  506.7 - SF7BW125 to SF12BW125
692 +)))
574 574  
694 +(((
575 575  506.9 - SF7BW125 to SF12BW125
696 +)))
576 576  
698 +(((
577 577  507.1 - SF7BW125 to SF12BW125
700 +)))
578 578  
702 +(((
579 579  507.3 - SF7BW125 to SF12BW125
704 +)))
580 580  
706 +(((
581 581  507.5 - SF7BW125 to SF12BW125
708 +)))
582 582  
710 +(((
583 583  507.7 - SF7BW125 to SF12BW125
712 +)))
584 584  
714 +(((
585 585  507.9 - SF7BW125 to SF12BW125
716 +)))
586 586  
718 +(((
587 587  508.1 - SF7BW125 to SF12BW125
720 +)))
588 588  
722 +(((
589 589  505.3 - SF12BW125 (RX2 downlink only)
724 +)))
590 590  
591 591  
592 592  
... ... @@ -611,110 +611,220 @@
611 611  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
612 612  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
613 613  
749 +
614 614  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
615 615  
752 +(((
616 616  (% style="color:blue" %)**Default Uplink channel:**
754 +)))
617 617  
756 +(((
618 618  923.2 - SF7BW125 to SF10BW125
758 +)))
619 619  
760 +(((
620 620  923.4 - SF7BW125 to SF10BW125
762 +)))
621 621  
764 +(((
765 +
766 +)))
622 622  
768 +(((
623 623  (% style="color:blue" %)**Additional Uplink Channel**:
770 +)))
624 624  
772 +(((
625 625  (OTAA mode, channel added by JoinAccept message)
774 +)))
626 626  
776 +(((
777 +
778 +)))
627 627  
780 +(((
628 628  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
782 +)))
629 629  
784 +(((
630 630  922.2 - SF7BW125 to SF10BW125
786 +)))
631 631  
788 +(((
632 632  922.4 - SF7BW125 to SF10BW125
790 +)))
633 633  
792 +(((
634 634  922.6 - SF7BW125 to SF10BW125
794 +)))
635 635  
796 +(((
636 636  922.8 - SF7BW125 to SF10BW125
798 +)))
637 637  
800 +(((
638 638  923.0 - SF7BW125 to SF10BW125
802 +)))
639 639  
804 +(((
640 640  922.0 - SF7BW125 to SF10BW125
806 +)))
641 641  
808 +(((
809 +
810 +)))
642 642  
812 +(((
643 643  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
814 +)))
644 644  
816 +(((
645 645  923.6 - SF7BW125 to SF10BW125
818 +)))
646 646  
820 +(((
647 647  923.8 - SF7BW125 to SF10BW125
822 +)))
648 648  
824 +(((
649 649  924.0 - SF7BW125 to SF10BW125
826 +)))
650 650  
828 +(((
651 651  924.2 - SF7BW125 to SF10BW125
830 +)))
652 652  
832 +(((
653 653  924.4 - SF7BW125 to SF10BW125
834 +)))
654 654  
836 +(((
655 655  924.6 - SF7BW125 to SF10BW125
838 +)))
656 656  
840 +(((
841 +
842 +)))
657 657  
844 +(((
658 658  (% style="color:blue" %)**Downlink:**
846 +)))
659 659  
848 +(((
660 660  Uplink channels 1-8 (RX1)
850 +)))
661 661  
852 +(((
662 662  923.2 - SF10BW125 (RX2)
854 +)))
663 663  
664 664  
665 665  
666 666  === 2.8.6 KR920-923 (KR920) ===
667 667  
860 +(((
668 668  (% style="color:blue" %)**Default channel:**
862 +)))
669 669  
864 +(((
670 670  922.1 - SF7BW125 to SF12BW125
866 +)))
671 671  
868 +(((
672 672  922.3 - SF7BW125 to SF12BW125
870 +)))
673 673  
872 +(((
674 674  922.5 - SF7BW125 to SF12BW125
874 +)))
675 675  
876 +(((
877 +
878 +)))
676 676  
880 +(((
677 677  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
882 +)))
678 678  
884 +(((
679 679  922.1 - SF7BW125 to SF12BW125
886 +)))
680 680  
888 +(((
681 681  922.3 - SF7BW125 to SF12BW125
890 +)))
682 682  
892 +(((
683 683  922.5 - SF7BW125 to SF12BW125
894 +)))
684 684  
896 +(((
685 685  922.7 - SF7BW125 to SF12BW125
898 +)))
686 686  
900 +(((
687 687  922.9 - SF7BW125 to SF12BW125
902 +)))
688 688  
904 +(((
689 689  923.1 - SF7BW125 to SF12BW125
906 +)))
690 690  
908 +(((
691 691  923.3 - SF7BW125 to SF12BW125
910 +)))
692 692  
912 +(((
913 +
914 +)))
693 693  
916 +(((
694 694  (% style="color:blue" %)**Downlink:**
918 +)))
695 695  
920 +(((
696 696  Uplink channels 1-7(RX1)
922 +)))
697 697  
924 +(((
698 698  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
926 +)))
699 699  
700 700  
701 701  
702 702  === 2.8.7 IN865-867 (IN865) ===
703 703  
932 +(((
704 704  (% style="color:blue" %)**Uplink:**
934 +)))
705 705  
936 +(((
706 706  865.0625 - SF7BW125 to SF12BW125
938 +)))
707 707  
940 +(((
708 708  865.4025 - SF7BW125 to SF12BW125
942 +)))
709 709  
944 +(((
710 710  865.9850 - SF7BW125 to SF12BW125
946 +)))
711 711  
948 +(((
949 +
950 +)))
712 712  
952 +(((
713 713  (% style="color:blue" %)**Downlink:**
954 +)))
714 714  
956 +(((
715 715  Uplink channels 1-3 (RX1)
958 +)))
716 716  
960 +(((
717 717  866.550 - SF10BW125 (RX2)
962 +)))
718 718  
719 719  
720 720  
... ... @@ -725,6 +725,7 @@
725 725  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
726 726  * Blink once when device transmit a packet.
727 727  
973 +
728 728  == 2.10 ​Firmware Change Log ==
729 729  
730 730  
... ... @@ -739,26 +739,51 @@
739 739  
740 740  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
741 741  
988 +(((
742 742  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
990 +)))
743 743  
744 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
745 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
992 +* (((
993 +AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
994 +)))
995 +* (((
996 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
997 +)))
746 746  
999 +(((
747 747  There are two kinds of commands to configure LSPH01, they are:
1001 +)))
748 748  
749 -* (% style="color:#4f81bd" %)** General Commands**.
1003 +* (((
1004 +(% style="color:#4f81bd" %)** General Commands**.
1005 +)))
750 750  
1007 +(((
751 751  These commands are to configure:
1009 +)))
752 752  
753 -* General system settings like: uplink interval.
754 -* LoRaWAN protocol & radio related command.
1011 +* (((
1012 +General system settings like: uplink interval.
1013 +)))
1014 +* (((
1015 +LoRaWAN protocol & radio related command.
1016 +)))
755 755  
1018 +(((
756 756  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1020 +)))
757 757  
1022 +(((
1023 +
1024 +)))
758 758  
759 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1026 +* (((
1027 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1028 +)))
760 760  
1030 +(((
761 761  These commands only valid for LSPH01, as below:
1032 +)))
762 762  
763 763  
764 764  
... ... @@ -768,22 +768,10 @@
768 768  
769 769  (% style="color:#037691" %)**AT Command: AT+TDC**
770 770  
1042 +[[image:image-20220607171554-8.png]]
771 771  
772 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
773 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
774 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
775 -30000
776 776  
777 -OK
778 778  
779 -the interval is 30000ms = 30s
780 -)))
781 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
782 -OK
783 -
784 -Set transmit interval to 60000ms = 60 seconds
785 -)))
786 -
787 787  (% style="color:#037691" %)**Downlink Command: 0x01**
788 788  
789 789  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -793,6 +793,8 @@
793 793  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
794 794  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
795 795  
1055 +
1056 +
796 796  == 3.2 Set Interrupt Mode ==
797 797  
798 798  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -799,7 +799,7 @@
799 799  
800 800  (% style="color:#037691" %)**AT Command: AT+INTMOD**
801 801  
802 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1063 +[[image:image-20220607171716-9.png]]
803 803  
804 804  
805 805  (% style="color:#037691" %)**Downlink Command: 0x06**
... ... @@ -823,7 +823,7 @@
823 823  
824 824  (% style="color:#037691" %)**Downlink Command: 0x26**
825 825  
826 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1087 +[[image:image-20220607171917-10.png]]
827 827  
828 828  * Reply to the confirmation package: 26 01
829 829  * Reply to non-confirmed packet: 26 00
... ... @@ -911,7 +911,7 @@
911 911  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
912 912  )))
913 913  
914 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1175 +[[image:1654593587246-335.png]]
915 915  
916 916  
917 917  Minimum Working Voltage for the LSPH01:
... ... @@ -956,7 +956,7 @@
956 956  
957 957  And the Life expectation in difference case will be shown on the right.
958 958  
959 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1220 +[[image:1654593605679-189.png]]
960 960  
961 961  
962 962  The battery related documents as below:
... ... @@ -971,7 +971,7 @@
971 971  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
972 972  )))
973 973  
974 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1235 +[[image:image-20220607172042-11.png]]
975 975  
976 976  
977 977  
... ... @@ -997,7 +997,7 @@
997 997  
998 998  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
999 999  
1000 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1261 +[[image:1654593668970-604.png]]
1001 1001  
1002 1002  **Connection:**
1003 1003  
... ... @@ -1011,7 +1011,7 @@
1011 1011  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1012 1012  
1013 1013  
1014 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1275 + [[image:1654593712276-618.png]]
1015 1015  
1016 1016  Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1017 1017  
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0