Skip to Content
Last modified by Xiaoling on 2025/04/24 17:18
From version 48.1
edited by Xiaoling
on 2022/06/07 17:05
Change comment: Uploaded new attachment "1654592721645-318.png", version {1}
To version 85.3
edited by Xiaoling
on 2022/06/08 11:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -68,21 +68,29 @@
68 68  
69 69  
70 70  
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
75 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 +)))
78 78  
79 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
81 +)))
80 80  
83 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
85 +)))
82 82  
87 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
89 +)))
84 84  
91 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
93 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -147,7 +147,7 @@
147 147  )))
148 148  
149 149  (((
150 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
158 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
151 151  )))
152 152  
153 153  
... ... @@ -210,18 +210,27 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
221 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
223 +)))
214 214  
225 +[[image:1654592697690-910.png]]
215 215  
216 216  
217 217  
218 218  == 2.3 ​Uplink Payload ==
219 219  
231 +(((
220 220  LSPH01 will uplink payload via LoRaWAN with below payload format: 
233 +)))
221 221  
235 +(((
222 222  Uplink payload includes in total 11 bytes.
237 +)))
223 223  
239 +(((
224 224  Normal uplink payload:
241 +)))
225 225  
226 226  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
227 227  |(((
... ... @@ -229,17 +229,17 @@
229 229  
230 230  **(bytes)**
231 231  )))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
232 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
233 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
249 +|**Value**|[[BAT>>||anchor="2.3.1BatteryInfo"]]|(((
250 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
234 234  
235 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
236 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
237 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
252 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
253 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
254 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
238 238  )))|Reserve|(((
239 -[[Message Type>>path:#H2.3.6MessageType]]
256 +[[Message Type>>||anchor="H2.3.6MessageType"]]
240 240  )))
241 241  
242 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581735133-458.png?rev=1.1||alt="1654581735133-458.png"]]
259 +[[image:1654592721645-318.png]]
243 243  
244 244  
245 245  
... ... @@ -292,7 +292,7 @@
292 292  
293 293  === 2.3.5 Interrupt Pin ===
294 294  
295 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
312 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
296 296  
297 297  
298 298  **Example:**
... ... @@ -305,16 +305,20 @@
305 305  
306 306  === 2.3.6 Message Type ===
307 307  
325 +(((
308 308  For a normal uplink payload, the message type is always 0x01.
327 +)))
309 309  
329 +(((
310 310  Valid Message Type:
331 +)))
311 311  
312 312  
313 313  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
314 -|**Message Type Code**|**Description**|**Payload**
315 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
316 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
317 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
335 +|=**Message Type Code**|=**Description**|=**Payload**
336 +|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
337 +|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
338 +|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
318 318  
319 319  === 2.3.7 Decode payload in The Things Network ===
320 320  
... ... @@ -321,7 +321,7 @@
321 321  While using TTN network, you can add the payload format to decode the payload.
322 322  
323 323  
324 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654582541848-906.png?rev=1.1||alt="1654582541848-906.png"]]
345 +[[image:1654592762713-715.png]]
325 325  
326 326  (((
327 327  The payload decoder function for TTN is here:
... ... @@ -341,18 +341,27 @@
341 341  
342 342  == 2.5 ​Show Data in DataCake IoT Server ==
343 343  
365 +(((
344 344  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
367 +)))
345 345  
369 +(((
370 +
371 +)))
346 346  
373 +(((
347 347  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
375 +)))
348 348  
377 +(((
349 349  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
379 +)))
350 350  
351 351  
352 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583683416-869.png?rev=1.1||alt="1654583683416-869.png"]]
382 +[[image:1654592790040-760.png]]
353 353  
354 354  
355 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583694084-878.png?rev=1.1||alt="1654583694084-878.png"]]
385 +[[image:1654592800389-571.png]]
356 356  
357 357  
358 358  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
... ... @@ -359,33 +359,37 @@
359 359  
360 360  (% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**
361 361  
362 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583711590-413.png?rev=1.1||alt="1654583711590-413.png"]]
392 +[[image:1654592819047-535.png]]
363 363  
364 364  
365 365  
366 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583732798-193.png?rev=1.1||alt="1654583732798-193.png"]]
396 +[[image:1654592833877-762.png]]
367 367  
368 368  
369 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583749683-259.png?rev=1.1||alt="1654583749683-259.png"]]
399 +[[image:1654592856403-259.png]]
370 370  
371 371  
402 +(((
372 372  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
404 +)))
373 373  
406 +(((
374 374  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
408 +)))
375 375  
376 376  
377 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583770974-935.png?rev=1.1||alt="1654583770974-935.png"]]
411 +[[image:1654592878525-845.png]]
378 378  
379 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583781517-146.png?rev=1.1||alt="1654583781517-146.png"]]
413 +[[image:1654592892967-474.png]]
380 380  
381 381  
382 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583791351-557.png?rev=1.1||alt="1654583791351-557.png"]]
416 +[[image:1654592905354-123.png]]
383 383  
384 384  
385 385  After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
386 386  
387 387  
388 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583805491-713.png?rev=1.1||alt="1654583805491-713.png"]]
422 +[[image:1654592917530-261.png]]
389 389  
390 390  
391 391  
... ... @@ -394,8 +394,10 @@
394 394  === 2.6.1 Before measurement ===
395 395  
396 396  (((
431 +(((
397 397  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
398 398  )))
434 +)))
399 399  
400 400  
401 401  
... ... @@ -402,24 +402,45 @@
402 402  === 2.6.2 Measurement ===
403 403  
404 404  
441 +(((
405 405  (% style="color:#4f81bd" %)**Measurement the soil surface:**
443 +)))
406 406  
407 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654584128046-287.png?rev=1.1||alt="1654584128046-287.png"]]
445 +(((
446 +[[image:1654592946732-634.png]]
447 +)))
408 408  
449 +(((
409 409  Choose the proper measuring position. Split the surface soil according to the measured deep.
451 +)))
410 410  
453 +(((
411 411  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
455 +)))
412 412  
457 +(((
413 413  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
459 +)))
414 414  
461 +(((
415 415  Put soil over the probe after insert. And start to measure.
463 +)))
416 416  
465 +(((
466 +
467 +)))
417 417  
469 +(((
418 418  (% style="color:#4f81bd" %)**Measurement inside soil:**
471 +)))
419 419  
473 +(((
420 420  Dig a hole with diameter > 20CM.
475 +)))
421 421  
477 +(((
422 422  Insert the probe inside, method like measure the surface.
479 +)))
423 423  
424 424  
425 425  
... ... @@ -449,16 +449,20 @@
449 449  
450 450  == 2.7 Calibration ==
451 451  
509 +(((
452 452  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
511 +)))
453 453  
513 +(((
454 454  After stable, user can use below command to calibrate.
515 +)))
455 455  
456 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607144936-3.png?rev=1.1||alt="image-20220607144936-3.png"]]
517 +[[image:image-20220607171149-4.png]]
457 457  
458 458  
459 459  (% style="color:#037691" %)**Calibration Payload**
460 460  
461 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
522 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
462 462  |(((
463 463  **Size**
464 464  
... ... @@ -473,7 +473,7 @@
473 473  
474 474  Calibrate value
475 475  )))|Reserve|(((
476 -[[Message Type>>path:#H2.3.6MessageType]]
537 +[[Message Type>>||anchor="H2.3.6MessageType"]]
477 477  
478 478  Always 0x03
479 479  )))
... ... @@ -480,11 +480,13 @@
480 480  
481 481  User can also send 0x14 downlink command to poll the current calibration payload.
482 482  
483 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607145603-4.png?rev=1.1||alt="image-20220607145603-4.png"]]
544 +[[image:image-20220607171416-7.jpeg]]
484 484  
546 +
485 485  * Reply to the confirmation package: 14 01
486 486  * Reply to non-confirmed packet: 14 00
487 487  
550 +
488 488  == 2.8 Frequency Plans ==
489 489  
490 490  (((
... ... @@ -494,32 +494,61 @@
494 494  
495 495  === 2.8.1 EU863-870 (EU868) ===
496 496  
560 +(((
497 497  (% style="color:blue" %)**Uplink:**
562 +)))
498 498  
564 +(((
499 499  868.1 - SF7BW125 to SF12BW125
566 +)))
500 500  
568 +(((
501 501  868.3 - SF7BW125 to SF12BW125 and SF7BW250
570 +)))
502 502  
572 +(((
503 503  868.5 - SF7BW125 to SF12BW125
574 +)))
504 504  
576 +(((
505 505  867.1 - SF7BW125 to SF12BW125
578 +)))
506 506  
580 +(((
507 507  867.3 - SF7BW125 to SF12BW125
582 +)))
508 508  
584 +(((
509 509  867.5 - SF7BW125 to SF12BW125
586 +)))
510 510  
588 +(((
511 511  867.7 - SF7BW125 to SF12BW125
590 +)))
512 512  
592 +(((
513 513  867.9 - SF7BW125 to SF12BW125
594 +)))
514 514  
596 +(((
515 515  868.8 - FSK
598 +)))
516 516  
600 +(((
601 +
602 +)))
517 517  
604 +(((
518 518  (% style="color:blue" %)**Downlink:**
606 +)))
519 519  
608 +(((
520 520  Uplink channels 1-9 (RX1)
610 +)))
521 521  
612 +(((
522 522  869.525 - SF9BW125 (RX2 downlink only)
614 +)))
523 523  
524 524  
525 525  
... ... @@ -540,48 +540,92 @@
540 540  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
541 541  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
542 542  
635 +
543 543  === 2.8.3 CN470-510 (CN470) ===
544 544  
638 +(((
545 545  Used in China, Default use CHE=1
640 +)))
546 546  
642 +(((
547 547  (% style="color:blue" %)**Uplink:**
644 +)))
548 548  
646 +(((
549 549  486.3 - SF7BW125 to SF12BW125
648 +)))
550 550  
650 +(((
551 551  486.5 - SF7BW125 to SF12BW125
652 +)))
552 552  
654 +(((
553 553  486.7 - SF7BW125 to SF12BW125
656 +)))
554 554  
658 +(((
555 555  486.9 - SF7BW125 to SF12BW125
660 +)))
556 556  
662 +(((
557 557  487.1 - SF7BW125 to SF12BW125
664 +)))
558 558  
666 +(((
559 559  487.3 - SF7BW125 to SF12BW125
668 +)))
560 560  
670 +(((
561 561  487.5 - SF7BW125 to SF12BW125
672 +)))
562 562  
674 +(((
563 563  487.7 - SF7BW125 to SF12BW125
676 +)))
564 564  
678 +(((
679 +
680 +)))
565 565  
682 +(((
566 566  (% style="color:blue" %)**Downlink:**
684 +)))
567 567  
686 +(((
568 568  506.7 - SF7BW125 to SF12BW125
688 +)))
569 569  
690 +(((
570 570  506.9 - SF7BW125 to SF12BW125
692 +)))
571 571  
694 +(((
572 572  507.1 - SF7BW125 to SF12BW125
696 +)))
573 573  
698 +(((
574 574  507.3 - SF7BW125 to SF12BW125
700 +)))
575 575  
702 +(((
576 576  507.5 - SF7BW125 to SF12BW125
704 +)))
577 577  
706 +(((
578 578  507.7 - SF7BW125 to SF12BW125
708 +)))
579 579  
710 +(((
580 580  507.9 - SF7BW125 to SF12BW125
712 +)))
581 581  
714 +(((
582 582  508.1 - SF7BW125 to SF12BW125
716 +)))
583 583  
718 +(((
584 584  505.3 - SF12BW125 (RX2 downlink only)
720 +)))
585 585  
586 586  
587 587  
... ... @@ -608,108 +608,217 @@
608 608  
609 609  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
610 610  
747 +(((
611 611  (% style="color:blue" %)**Default Uplink channel:**
749 +)))
612 612  
751 +(((
613 613  923.2 - SF7BW125 to SF10BW125
753 +)))
614 614  
755 +(((
615 615  923.4 - SF7BW125 to SF10BW125
757 +)))
616 616  
759 +(((
760 +
761 +)))
617 617  
763 +(((
618 618  (% style="color:blue" %)**Additional Uplink Channel**:
765 +)))
619 619  
767 +(((
620 620  (OTAA mode, channel added by JoinAccept message)
769 +)))
621 621  
771 +(((
772 +
773 +)))
622 622  
775 +(((
623 623  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
777 +)))
624 624  
779 +(((
625 625  922.2 - SF7BW125 to SF10BW125
781 +)))
626 626  
783 +(((
627 627  922.4 - SF7BW125 to SF10BW125
785 +)))
628 628  
787 +(((
629 629  922.6 - SF7BW125 to SF10BW125
789 +)))
630 630  
791 +(((
631 631  922.8 - SF7BW125 to SF10BW125
793 +)))
632 632  
795 +(((
633 633  923.0 - SF7BW125 to SF10BW125
797 +)))
634 634  
799 +(((
635 635  922.0 - SF7BW125 to SF10BW125
801 +)))
636 636  
803 +(((
804 +
805 +)))
637 637  
807 +(((
638 638  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
809 +)))
639 639  
811 +(((
640 640  923.6 - SF7BW125 to SF10BW125
813 +)))
641 641  
815 +(((
642 642  923.8 - SF7BW125 to SF10BW125
817 +)))
643 643  
819 +(((
644 644  924.0 - SF7BW125 to SF10BW125
821 +)))
645 645  
823 +(((
646 646  924.2 - SF7BW125 to SF10BW125
825 +)))
647 647  
827 +(((
648 648  924.4 - SF7BW125 to SF10BW125
829 +)))
649 649  
831 +(((
650 650  924.6 - SF7BW125 to SF10BW125
833 +)))
651 651  
835 +(((
836 +
837 +)))
652 652  
839 +(((
653 653  (% style="color:blue" %)**Downlink:**
841 +)))
654 654  
843 +(((
655 655  Uplink channels 1-8 (RX1)
845 +)))
656 656  
847 +(((
657 657  923.2 - SF10BW125 (RX2)
849 +)))
658 658  
659 659  
660 660  
661 661  === 2.8.6 KR920-923 (KR920) ===
662 662  
855 +(((
663 663  (% style="color:blue" %)**Default channel:**
857 +)))
664 664  
859 +(((
665 665  922.1 - SF7BW125 to SF12BW125
861 +)))
666 666  
863 +(((
667 667  922.3 - SF7BW125 to SF12BW125
865 +)))
668 668  
867 +(((
669 669  922.5 - SF7BW125 to SF12BW125
869 +)))
670 670  
871 +(((
872 +
873 +)))
671 671  
875 +(((
672 672  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
877 +)))
673 673  
879 +(((
674 674  922.1 - SF7BW125 to SF12BW125
881 +)))
675 675  
883 +(((
676 676  922.3 - SF7BW125 to SF12BW125
885 +)))
677 677  
887 +(((
678 678  922.5 - SF7BW125 to SF12BW125
889 +)))
679 679  
891 +(((
680 680  922.7 - SF7BW125 to SF12BW125
893 +)))
681 681  
895 +(((
682 682  922.9 - SF7BW125 to SF12BW125
897 +)))
683 683  
899 +(((
684 684  923.1 - SF7BW125 to SF12BW125
901 +)))
685 685  
903 +(((
686 686  923.3 - SF7BW125 to SF12BW125
905 +)))
687 687  
907 +(((
908 +
909 +)))
688 688  
911 +(((
689 689  (% style="color:blue" %)**Downlink:**
913 +)))
690 690  
915 +(((
691 691  Uplink channels 1-7(RX1)
917 +)))
692 692  
919 +(((
693 693  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
921 +)))
694 694  
695 695  
696 696  
697 697  === 2.8.7 IN865-867 (IN865) ===
698 698  
927 +(((
699 699  (% style="color:blue" %)**Uplink:**
929 +)))
700 700  
931 +(((
701 701  865.0625 - SF7BW125 to SF12BW125
933 +)))
702 702  
935 +(((
703 703  865.4025 - SF7BW125 to SF12BW125
937 +)))
704 704  
939 +(((
705 705  865.9850 - SF7BW125 to SF12BW125
941 +)))
706 706  
943 +(((
944 +
945 +)))
707 707  
947 +(((
708 708  (% style="color:blue" %)**Downlink:**
949 +)))
709 709  
951 +(((
710 710  Uplink channels 1-3 (RX1)
953 +)))
711 711  
955 +(((
712 712  866.550 - SF10BW125 (RX2)
957 +)))
713 713  
714 714  
715 715  
... ... @@ -720,6 +720,7 @@
720 720  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
721 721  * Blink once when device transmit a packet.
722 722  
968 +
723 723  == 2.10 ​Firmware Change Log ==
724 724  
725 725  
... ... @@ -734,26 +734,51 @@
734 734  
735 735  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
736 736  
983 +(((
737 737  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
985 +)))
738 738  
739 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
740 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
987 +* (((
988 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
989 +)))
990 +* (((
991 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
992 +)))
741 741  
994 +(((
742 742  There are two kinds of commands to configure LSPH01, they are:
996 +)))
743 743  
744 -* (% style="color:#4f81bd" %)** General Commands**.
998 +* (((
999 +(% style="color:#4f81bd" %)** General Commands**.
1000 +)))
745 745  
1002 +(((
746 746  These commands are to configure:
1004 +)))
747 747  
748 -* General system settings like: uplink interval.
749 -* LoRaWAN protocol & radio related command.
1006 +* (((
1007 +General system settings like: uplink interval.
1008 +)))
1009 +* (((
1010 +LoRaWAN protocol & radio related command.
1011 +)))
750 750  
1013 +(((
751 751  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1015 +)))
752 752  
1017 +(((
1018 +
1019 +)))
753 753  
754 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1021 +* (((
1022 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1023 +)))
755 755  
1025 +(((
756 756  These commands only valid for LSPH01, as below:
1027 +)))
757 757  
758 758  
759 759  
... ... @@ -763,30 +763,31 @@
763 763  
764 764  (% style="color:#037691" %)**AT Command: AT+TDC**
765 765  
1037 +[[image:image-20220607171554-8.png]]
766 766  
767 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
768 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
769 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
770 -30000
771 771  
772 -OK
773 773  
774 -the interval is 30000ms = 30s
1041 +(((
1042 +(% style="color:#037691" %)**Downlink Command: 0x01**
775 775  )))
776 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
777 -OK
778 778  
779 -Set transmit interval to 60000ms = 60 seconds
1045 +(((
1046 +Format: Command Code (0x01) followed by 3 bytes time value.
780 780  )))
781 781  
782 -(% style="color:#037691" %)**Downlink Command: 0x01**
1049 +(((
1050 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1051 +)))
783 783  
784 -Format: Command Code (0x01) followed by 3 bytes time value.
1053 +* (((
1054 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1055 +)))
1056 +* (((
1057 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
785 785  
786 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1060 +
1061 +)))
790 790  
791 791  == 3.2 Set Interrupt Mode ==
792 792  
... ... @@ -794,21 +794,37 @@
794 794  
795 795  (% style="color:#037691" %)**AT Command: AT+INTMOD**
796 796  
797 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1069 +[[image:image-20220607171716-9.png]]
798 798  
799 799  
1072 +(((
800 800  (% style="color:#037691" %)**Downlink Command: 0x06**
1074 +)))
801 801  
1076 +(((
802 802  Format: Command Code (0x06) followed by 3 bytes.
1078 +)))
803 803  
1080 +(((
804 804  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1082 +)))
805 805  
806 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
807 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1084 +* (((
1085 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1086 +)))
1087 +* (((
1088 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1089 +)))
808 808  
1091 +(((
1092 +
1093 +)))
1094 +
1095 +
1096 +
809 809  == 3.3 Calibrate Sensor ==
810 810  
811 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1099 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
812 812  
813 813  
814 814  
... ... @@ -818,7 +818,7 @@
818 818  
819 819  (% style="color:#037691" %)**Downlink Command: 0x26**
820 820  
821 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1109 +[[image:image-20220607171917-10.png]]
822 822  
823 823  * Reply to the confirmation package: 26 01
824 824  * Reply to non-confirmed packet: 26 00
... ... @@ -840,7 +840,7 @@
840 840  
841 841  Version
842 842  )))|Sensor Type|Reserve|(((
843 -[[Message Type>>path:#H2.3.6MessageType]]
1131 +[[Message Type>>||anchor="H2.3.6MessageType"]]
844 844  Always 0x02
845 845  )))
846 846  
... ... @@ -906,7 +906,7 @@
906 906  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
907 907  )))
908 908  
909 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1197 +[[image:1654593587246-335.png]]
910 910  
911 911  
912 912  Minimum Working Voltage for the LSPH01:
... ... @@ -951,7 +951,7 @@
951 951  
952 952  And the Life expectation in difference case will be shown on the right.
953 953  
954 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1242 +[[image:1654593605679-189.png]]
955 955  
956 956  
957 957  The battery related documents as below:
... ... @@ -966,7 +966,7 @@
966 966  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
967 967  )))
968 968  
969 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1257 +[[image:image-20220607172042-11.png]]
970 970  
971 971  
972 972  
... ... @@ -980,9 +980,13 @@
980 980  
981 981  === ​4.3.2 Replace the battery ===
982 982  
1271 +(((
983 983  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1273 +)))
984 984  
1275 +(((
985 985  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1277 +)))
986 986  
987 987  
988 988  
... ... @@ -992,7 +992,7 @@
992 992  
993 993  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
994 994  
995 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1287 +[[image:1654593668970-604.png]]
996 996  
997 997  **Connection:**
998 998  
... ... @@ -1003,24 +1003,24 @@
1003 1003  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1004 1004  
1005 1005  
1298 +(((
1006 1006  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1300 +)))
1007 1007  
1008 1008  
1009 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1303 + [[image:1654593712276-618.png]]
1010 1010  
1011 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1305 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1012 1012  
1013 1013  
1014 -
1015 1015  = 6. FAQ =
1016 1016  
1017 1017  == 6.1 How to change the LoRa Frequency Bands/Region ==
1018 1018  
1019 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1312 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1020 1020  When downloading the images, choose the required image file for download. ​
1021 1021  
1022 1022  
1023 -
1024 1024  = 7. Trouble Shooting =
1025 1025  
1026 1026  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1028,7 +1028,6 @@
1028 1028  In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1029 1029  
1030 1030  
1031 -
1032 1032  = 8. Order Info =
1033 1033  
1034 1034  Part Number: (% style="color:blue" %)**LSPH01-XX**
... ... @@ -1064,3 +1064,4 @@
1064 1064  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1065 1065  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1066 1066  
1358 +
1654592762713-715.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
1654592790040-760.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
1654592800389-571.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
1654592819047-535.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +246.2 KB
Content
1654592833877-762.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.6 KB
Content
1654592856403-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +129.1 KB
Content
1654592878525-845.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
1654592892967-474.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1654592905354-123.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.3 KB
Content
1654592917530-261.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +127.1 KB
Content
1654592946732-634.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +345.3 KB
Content
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171123-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.8 KB
Content
image-20220607171149-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.8 KB
Content
image-20220607171311-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607171335-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.1 KB
Content
image-20220607171416-7.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +5.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content