Last modified by Xiaoling on 2024/01/17 16:19
<
From version < 29.6 >
edited by Xiaoling
on 2022/06/07 15:52
To version < 25.1 >
edited by Xiaoling
on 2022/06/07 14:49
>
Change comment: Uploaded new attachment "image-20220607144936-3.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -338,6 +338,8 @@
338 338  
339 339  
340 340  
341 +
342 +
341 341  == 2.6 Installation and Maintain ==
342 342  
343 343  === 2.6.1 Before measurement ===
... ... @@ -391,23 +391,50 @@
391 391  )))
392 392  1. (((
393 393  The probe is IP68 can be put in water.
396 +)))
394 394  
395 395  
396 -
397 -)))
398 398  
399 399  == 2.7 Calibration ==
400 400  
401 401  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
402 402  
403 -After stable, user can use below command to calibrate.
404 404  
405 -[[image:image-20220607144936-3.png]]
405 +**After stable, user can use below command to calibrate.**
406 406  
407 407  
408 -(% style="color:#037691" %)**Calibration Payload**
408 +|**pH buffer solution**|**AT Command to calibrate**|**Downlink Command**|**Read Cal Value**
409 +|**4.00**|**AT+PHCAL=4**|(((
410 +**0x13 04**
409 409  
410 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
412 +**Reply with Calibrate payload**
413 +)))|(((
414 +**AT+PHCAL=?**
415 +
416 +**Example 41,61,91**
417 +)))
418 +|**6.86**|**AT+PHCAL=6**|(((
419 +**0x13 06**
420 +
421 +**Reply with Calibrate payload**
422 +)))|**AT+PHCAL=?**
423 +|**9.18**|**AT+PHCAL=9**|(((
424 +**0x13 09**
425 +
426 +**Reply with Calibrate payload**
427 +)))|**AT+PHCAL=?**
428 +|**Factory Default**|**AT+PHCAL=15**|(((
429 +**0x13 15**
430 +
431 +**Reply with Calibrate payload**
432 +)))|(((
433 +**AT+PHCAL=?**
434 +
435 +**Example 151**
436 +)))
437 +
438 +Calibration Payload
439 +
411 411  |(((
412 412  **Size**
413 413  
... ... @@ -422,31 +422,33 @@
422 422  
423 423  Calibrate value
424 424  )))|Reserve|(((
425 -[[Message Type>>||anchor="H2.3.6MessageType"]]
454 +[[Message>>path:#Message_Type]]
426 426  
456 +[[Type>>path:#Message_Type]]
457 +
427 427  Always 0x03
428 428  )))
429 429  
430 430  User can also send 0x14 downlink command to poll the current calibration payload.
431 431  
432 -[[image:image-20220607145603-4.png]]
433 433  
464 +|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
465 +|Get Calibration Version Info|Any|14|2
466 +
434 434  * Reply to the confirmation package: 14 01
435 435  * Reply to non-confirmed packet: 14 00
436 436  
470 +1.
471 +11. Frequency Plans
437 437  
438 -
439 -== 2.8 Frequency Plans ==
440 -
441 -(((
442 442  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
443 -)))
444 444  
475 +1.
476 +11.
477 +111. EU863-870 (EU868)
445 445  
446 -=== 2.8.1 EU863-870 (EU868) ===
479 +Uplink:
447 447  
448 -(% style="color:blue" %)**Uplink:**
449 -
450 450  868.1 - SF7BW125 to SF12BW125
451 451  
452 452  868.3 - SF7BW125 to SF12BW125 and SF7BW250
... ... @@ -466,7 +466,7 @@
466 466  868.8 - FSK
467 467  
468 468  
469 -(% style="color:blue" %)**Downlink:**
500 +Downlink:
470 470  
471 471  Uplink channels 1-9 (RX1)
472 472  
... ... @@ -473,31 +473,28 @@
473 473  869.525 - SF9BW125 (RX2 downlink only)
474 474  
475 475  
507 +1.
508 +11.
509 +111. US902-928(US915)
476 476  
477 -=== 2.8.2 US902-928(US915) ===
478 -
479 -(((
480 480  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
481 -)))
482 482  
483 -(((
513 +
484 484  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
485 -)))
486 486  
487 -(((
516 +
488 488  After Join success, the end node will switch to the correct sub band by:
489 -)))
490 490  
491 491  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
492 492  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
493 493  
522 +1.
523 +11.
524 +111. CN470-510 (CN470)
494 494  
495 -
496 -=== 2.8.3 CN470-510 (CN470) ===
497 -
498 498  Used in China, Default use CHE=1
499 499  
500 -(% style="color:blue" %)**Uplink:**
528 +Uplink:
501 501  
502 502  486.3 - SF7BW125 to SF12BW125
503 503  
... ... @@ -516,7 +516,7 @@
516 516  487.7 - SF7BW125 to SF12BW125
517 517  
518 518  
519 -(% style="color:blue" %)**Downlink:**
547 +Downlink:
520 520  
521 521  506.7 - SF7BW125 to SF12BW125
522 522  
... ... @@ -537,47 +537,38 @@
537 537  505.3 - SF12BW125 (RX2 downlink only)
538 538  
539 539  
568 +1.
569 +11.
570 +111. AU915-928(AU915)
540 540  
541 -=== 2.8.4 AU915-928(AU915) ===
542 -
543 -(((
544 544  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
545 -)))
546 546  
547 -(((
574 +
548 548  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
549 -)))
550 550  
551 -(((
552 -
553 -)))
554 554  
555 -(((
556 556  After Join success, the end node will switch to the correct sub band by:
557 -)))
558 558  
559 559  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
560 560  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
561 561  
583 +1.
584 +11.
585 +111. AS920-923 & AS923-925 (AS923)
562 562  
587 +**Default Uplink channel:**
563 563  
564 -
565 -=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
566 -
567 -(% style="color:blue" %)**Default Uplink channel:**
568 -
569 569  923.2 - SF7BW125 to SF10BW125
570 570  
571 571  923.4 - SF7BW125 to SF10BW125
572 572  
573 573  
574 -(% style="color:blue" %)**Additional Uplink Channel**:
594 +**Additional Uplink Channel**:
575 575  
576 576  (OTAA mode, channel added by JoinAccept message)
577 577  
598 +**AS920~~AS923 for Japan, Malaysia, Singapore**:
578 578  
579 -(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
580 -
581 581  922.2 - SF7BW125 to SF10BW125
582 582  
583 583  922.4 - SF7BW125 to SF10BW125
... ... @@ -591,7 +591,7 @@
591 591  922.0 - SF7BW125 to SF10BW125
592 592  
593 593  
594 -(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
613 +**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
595 595  
596 596  923.6 - SF7BW125 to SF10BW125
597 597  
... ... @@ -606,18 +606,20 @@
606 606  924.6 - SF7BW125 to SF10BW125
607 607  
608 608  
609 -(% style="color:blue" %)**Downlink:**
610 610  
629 +**Downlink:**
630 +
611 611  Uplink channels 1-8 (RX1)
612 612  
613 613  923.2 - SF10BW125 (RX2)
614 614  
615 615  
636 +1.
637 +11.
638 +111. KR920-923 (KR920)
616 616  
617 -=== 2.8.6 KR920-923 (KR920) ===
640 +Default channel:
618 618  
619 -(% style="color:blue" %)**Default channel:**
620 -
621 621  922.1 - SF7BW125 to SF12BW125
622 622  
623 623  922.3 - SF7BW125 to SF12BW125
... ... @@ -625,7 +625,7 @@
625 625  922.5 - SF7BW125 to SF12BW125
626 626  
627 627  
628 -(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
649 +Uplink: (OTAA mode, channel added by JoinAccept message)
629 629  
630 630  922.1 - SF7BW125 to SF12BW125
631 631  
... ... @@ -642,7 +642,7 @@
642 642  923.3 - SF7BW125 to SF12BW125
643 643  
644 644  
645 -(% style="color:blue" %)**Downlink:**
666 +Downlink:
646 646  
647 647  Uplink channels 1-7(RX1)
648 648  
... ... @@ -649,9 +649,11 @@
649 649  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
650 650  
651 651  
652 -=== 2.8.7 IN865-867 (IN865) ===
673 +1.
674 +11.
675 +111. IN865-867 (IN865)
653 653  
654 -(% style="color:blue" %)**Uplink:**
677 +Uplink:
655 655  
656 656  865.0625 - SF7BW125 to SF12BW125
657 657  
... ... @@ -660,7 +660,7 @@
660 660  865.9850 - SF7BW125 to SF12BW125
661 661  
662 662  
663 -(% style="color:blue" %)**Downlink:**
686 +Downlink:
664 664  
665 665  Uplink channels 1-3 (RX1)
666 666  
... ... @@ -667,36 +667,45 @@
667 667  866.550 - SF10BW125 (RX2)
668 668  
669 669  
693 +1.
694 +11. LED Indicator
670 670  
671 -== 2.9 LED Indicator ==
672 -
673 673  The LSPH01 has an internal LED which is to show the status of different state.
674 674  
698 +
675 675  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
676 676  * Blink once when device transmit a packet.
677 677  
678 -== 2.10 ​Firmware Change Log ==
702 +1.
703 +11. ​Firmware Change Log
679 679  
680 -
681 681  **Firmware download link:**
682 682  
683 683  [[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
684 684  
685 685  
686 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
710 +**Firmware Upgrade Method:**
687 687  
712 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
688 688  
689 689  
690 -= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
691 691  
716 +
717 +
718 +
719 +1. Configure LSPH01 via AT Command or LoRaWAN Downlink
720 +
692 692  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
693 693  
694 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
695 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
723 +* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
724 +* LoRaWAN Downlink instruction for different platforms:
696 696  
726 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
727 +
728 +
697 697  There are two kinds of commands to configure LSPH01, they are:
698 698  
699 -* (% style="color:#4f81bd" %)** General Commands**.
731 +* **General Commands**.
700 700  
701 701  These commands are to configure:
702 702  
... ... @@ -703,25 +703,25 @@
703 703  * General system settings like: uplink interval.
704 704  * LoRaWAN protocol & radio related command.
705 705  
706 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
738 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
707 707  
740 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
708 708  
709 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
710 710  
743 +* **Commands special design for LSPH01**
744 +
711 711  These commands only valid for LSPH01, as below:
712 712  
713 713  
748 +1.
749 +11. Set Transmit Interval Time
714 714  
715 -== 3.1 Set Transmit Interval Time ==
716 -
717 717  Feature: Change LoRaWAN End Node Transmit Interval.
718 718  
719 -(% style="color:#037691" %)**AT Command: AT+TDC**
753 +**AT Command: AT+TDC**
720 720  
721 -
722 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
723 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
724 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
755 +|**Command Example**|**Function**|**Response**
756 +|AT+TDC=?|Show current transmit Interval|(((
725 725  30000
726 726  
727 727  OK
... ... @@ -728,13 +728,13 @@
728 728  
729 729  the interval is 30000ms = 30s
730 730  )))
731 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
763 +|AT+TDC=60000|Set Transmit Interval|(((
732 732  OK
733 733  
734 734  Set transmit interval to 60000ms = 60 seconds
735 735  )))
736 736  
737 -(% style="color:#037691" %)**Downlink Command: 0x01**
769 +**Downlink Command: 0x01**
738 738  
739 739  Format: Command Code (0x01) followed by 3 bytes time value.
740 740  
... ... @@ -743,18 +743,32 @@
743 743  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
744 744  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
745 745  
778 +1.
779 +11. Set Interrupt Mode
746 746  
747 -== 3.2 Set Interrupt Mode ==
748 -
749 749  Feature, Set Interrupt mode for GPIO_EXIT.
750 750  
751 -(% style="color:#037691" %)**AT Command: AT+INTMOD**
783 +**AT Command: AT+INTMOD**
752 752  
753 -[[image:image-20220607153759-6.png]]
785 +|**Command Example**|**Function**|**Response**
786 +|AT+INTMOD=?|Show current interrupt mode|(((
787 +0
754 754  
789 +OK
755 755  
756 -(% style="color:#037691" %)**Downlink Command: 0x06**
791 +the mode is 0 = No interruption
792 +)))
793 +|AT+INTMOD=2|(((
794 +Set Transmit Interval
757 757  
796 +1. (Disable Interrupt),
797 +1. (Trigger by rising and falling edge),
798 +1. (Trigger by falling edge)
799 +1. (Trigger by rising edge)
800 +)))|OK
801 +
802 +**Downlink Command: 0x06**
803 +
758 758  Format: Command Code (0x06) followed by 3 bytes.
759 759  
760 760  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
... ... @@ -762,21 +762,25 @@
762 762  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
763 763  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
764 764  
811 +1.
812 +11. Calibrate Sensor
765 765  
766 -== 3.3 Calibrate Sensor ==
814 +Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands
767 767  
768 -Detail See [[Calibration Guide>>||anchor="2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
769 769  
770 770  
818 +1.
819 +11. Get Firmware Version Info
771 771  
772 -== 3.4 Get Firmware Version Info ==
773 -
774 774  Feature: use downlink to get firmware version.
775 775  
776 -(% style="color:#037691" %)**Downlink Command: 0x26**
777 777  
778 -[[image:image-20220607154718-7.png]]
824 +**Downlink Command: 0x26**
779 779  
826 +
827 +|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
828 +|Get Firmware Version Info|Any|26|2
829 +
780 780  * Reply to the confirmation package: 26 01
781 781  * Reply to non-confirmed packet: 26 00
782 782  
... ... @@ -784,10 +784,11 @@
784 784  
785 785  Configures info payload:
786 786  
787 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
788 -|=(((
789 -**Size(bytes)**
790 -)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
837 +|(((
838 +**Size**
839 +
840 +**(bytes)**
841 +)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**
791 791  |**Value**|Software Type|(((
792 792  Frequency
793 793  
... ... @@ -797,7 +797,10 @@
797 797  
798 798  Version
799 799  )))|Sensor Type|Reserve|(((
800 -[[Message Type>>||anchor="H2.3.6MessageType"]]
851 +[[Message>>path:#Message_Type]]
852 +
853 +[[Type>>path:#Message_Type]]
854 +
801 801  Always 0x02
802 802  )))
803 803  
image-20220607145603-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.8 KB
Content
image-20220607153237-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.9 KB
Content
image-20220607153759-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
image-20220607154718-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0