Last modified by Xiaoling on 2024/01/17 16:19
<
From version < 29.4 >
edited by Xiaoling
on 2022/06/07 15:52
To version < 26.1 >
edited by Xiaoling
on 2022/06/07 14:56
>
Change comment: Uploaded new attachment "image-20220607145603-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -400,11 +400,13 @@
400 400  
401 401  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
402 402  
403 -After stable, user can use below command to calibrate.
404 404  
404 +(% style="color:#037691" %)**After stable, user can use below command to calibrate.**
405 +
405 405  [[image:image-20220607144936-3.png]]
406 406  
407 407  
409 +
408 408  (% style="color:#037691" %)**Calibration Payload**
409 409  
410 410  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
... ... @@ -429,24 +429,24 @@
429 429  
430 430  User can also send 0x14 downlink command to poll the current calibration payload.
431 431  
432 -[[image:image-20220607145603-4.png]]
433 433  
435 +|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
436 +|Get Calibration Version Info|Any|14|2
437 +
434 434  * Reply to the confirmation package: 14 01
435 435  * Reply to non-confirmed packet: 14 00
436 436  
441 +1.
442 +11. Frequency Plans
437 437  
438 -
439 -== 2.8 Frequency Plans ==
440 -
441 -(((
442 442  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
443 -)))
444 444  
446 +1.
447 +11.
448 +111. EU863-870 (EU868)
445 445  
446 -=== 2.8.1 EU863-870 (EU868) ===
450 +Uplink:
447 447  
448 -(% style="color:blue" %)**Uplink:**
449 -
450 450  868.1 - SF7BW125 to SF12BW125
451 451  
452 452  868.3 - SF7BW125 to SF12BW125 and SF7BW250
... ... @@ -466,7 +466,7 @@
466 466  868.8 - FSK
467 467  
468 468  
469 -(% style="color:blue" %)**Downlink:**
471 +Downlink:
470 470  
471 471  Uplink channels 1-9 (RX1)
472 472  
... ... @@ -473,29 +473,28 @@
473 473  869.525 - SF9BW125 (RX2 downlink only)
474 474  
475 475  
478 +1.
479 +11.
480 +111. US902-928(US915)
476 476  
477 -=== 2.8.2 US902-928(US915) ===
478 -
479 -(((
480 480  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
481 -)))
482 482  
483 -(((
484 +
484 484  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
485 -)))
486 486  
487 -(((
487 +
488 488  After Join success, the end node will switch to the correct sub band by:
489 -)))
490 490  
491 491  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
492 492  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
493 493  
494 -=== 2.8.3 CN470-510 (CN470) ===
493 +1.
494 +11.
495 +111. CN470-510 (CN470)
495 495  
496 496  Used in China, Default use CHE=1
497 497  
498 -(% style="color:blue" %)**Uplink:**
499 +Uplink:
499 499  
500 500  486.3 - SF7BW125 to SF12BW125
501 501  
... ... @@ -514,7 +514,7 @@
514 514  487.7 - SF7BW125 to SF12BW125
515 515  
516 516  
517 -(% style="color:blue" %)**Downlink:**
518 +Downlink:
518 518  
519 519  506.7 - SF7BW125 to SF12BW125
520 520  
... ... @@ -535,31 +535,26 @@
535 535  505.3 - SF12BW125 (RX2 downlink only)
536 536  
537 537  
539 +1.
540 +11.
541 +111. AU915-928(AU915)
538 538  
539 -=== 2.8.4 AU915-928(AU915) ===
540 -
541 -(((
542 542  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
543 -)))
544 544  
545 -(((
545 +
546 546  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
547 -)))
548 548  
549 -(((
550 -
551 -)))
552 552  
553 -(((
554 554  After Join success, the end node will switch to the correct sub band by:
555 -)))
556 556  
557 557  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
558 558  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
559 559  
560 -=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
554 +1.
555 +11.
556 +111. AS920-923 & AS923-925 (AS923)
561 561  
562 -(% style="color:blue" %)**Default Uplink channel:**
558 +**Default Uplink channel:**
563 563  
564 564  923.2 - SF7BW125 to SF10BW125
565 565  
... ... @@ -566,13 +566,12 @@
566 566  923.4 - SF7BW125 to SF10BW125
567 567  
568 568  
569 -(% style="color:blue" %)**Additional Uplink Channel**:
565 +**Additional Uplink Channel**:
570 570  
571 571  (OTAA mode, channel added by JoinAccept message)
572 572  
569 +**AS920~~AS923 for Japan, Malaysia, Singapore**:
573 573  
574 -(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
575 -
576 576  922.2 - SF7BW125 to SF10BW125
577 577  
578 578  922.4 - SF7BW125 to SF10BW125
... ... @@ -586,7 +586,7 @@
586 586  922.0 - SF7BW125 to SF10BW125
587 587  
588 588  
589 -(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
584 +**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
590 590  
591 591  923.6 - SF7BW125 to SF10BW125
592 592  
... ... @@ -601,18 +601,20 @@
601 601  924.6 - SF7BW125 to SF10BW125
602 602  
603 603  
604 -(% style="color:blue" %)**Downlink:**
605 605  
600 +**Downlink:**
601 +
606 606  Uplink channels 1-8 (RX1)
607 607  
608 608  923.2 - SF10BW125 (RX2)
609 609  
610 610  
607 +1.
608 +11.
609 +111. KR920-923 (KR920)
611 611  
612 -=== 2.8.6 KR920-923 (KR920) ===
611 +Default channel:
613 613  
614 -(% style="color:blue" %)**Default channel:**
615 -
616 616  922.1 - SF7BW125 to SF12BW125
617 617  
618 618  922.3 - SF7BW125 to SF12BW125
... ... @@ -620,7 +620,7 @@
620 620  922.5 - SF7BW125 to SF12BW125
621 621  
622 622  
623 -(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
620 +Uplink: (OTAA mode, channel added by JoinAccept message)
624 624  
625 625  922.1 - SF7BW125 to SF12BW125
626 626  
... ... @@ -637,7 +637,7 @@
637 637  923.3 - SF7BW125 to SF12BW125
638 638  
639 639  
640 -(% style="color:blue" %)**Downlink:**
637 +Downlink:
641 641  
642 642  Uplink channels 1-7(RX1)
643 643  
... ... @@ -644,9 +644,11 @@
644 644  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
645 645  
646 646  
647 -=== 2.8.7 IN865-867 (IN865) ===
644 +1.
645 +11.
646 +111. IN865-867 (IN865)
648 648  
649 -(% style="color:blue" %)**Uplink:**
648 +Uplink:
650 650  
651 651  865.0625 - SF7BW125 to SF12BW125
652 652  
... ... @@ -655,7 +655,7 @@
655 655  865.9850 - SF7BW125 to SF12BW125
656 656  
657 657  
658 -(% style="color:blue" %)**Downlink:**
657 +Downlink:
659 659  
660 660  Uplink channels 1-3 (RX1)
661 661  
... ... @@ -662,36 +662,45 @@
662 662  866.550 - SF10BW125 (RX2)
663 663  
664 664  
664 +1.
665 +11. LED Indicator
665 665  
666 -== 2.9 LED Indicator ==
667 -
668 668  The LSPH01 has an internal LED which is to show the status of different state.
669 669  
669 +
670 670  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
671 671  * Blink once when device transmit a packet.
672 672  
673 -== 2.10 ​Firmware Change Log ==
673 +1.
674 +11. ​Firmware Change Log
674 674  
675 -
676 676  **Firmware download link:**
677 677  
678 678  [[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
679 679  
680 680  
681 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
681 +**Firmware Upgrade Method:**
682 682  
683 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
683 683  
684 684  
685 -= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
686 686  
687 +
688 +
689 +
690 +1. Configure LSPH01 via AT Command or LoRaWAN Downlink
691 +
687 687  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
688 688  
689 -* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
690 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
694 +* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
695 +* LoRaWAN Downlink instruction for different platforms:
691 691  
697 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
698 +
699 +
692 692  There are two kinds of commands to configure LSPH01, they are:
693 693  
694 -* (% style="color:#4f81bd" %)** General Commands**.
702 +* **General Commands**.
695 695  
696 696  These commands are to configure:
697 697  
... ... @@ -698,25 +698,25 @@
698 698  * General system settings like: uplink interval.
699 699  * LoRaWAN protocol & radio related command.
700 700  
701 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
709 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
702 702  
711 +[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
703 703  
704 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
705 705  
714 +* **Commands special design for LSPH01**
715 +
706 706  These commands only valid for LSPH01, as below:
707 707  
708 708  
719 +1.
720 +11. Set Transmit Interval Time
709 709  
710 -== 3.1 Set Transmit Interval Time ==
711 -
712 712  Feature: Change LoRaWAN End Node Transmit Interval.
713 713  
714 -(% style="color:#037691" %)**AT Command: AT+TDC**
724 +**AT Command: AT+TDC**
715 715  
716 -
717 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
718 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
719 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
726 +|**Command Example**|**Function**|**Response**
727 +|AT+TDC=?|Show current transmit Interval|(((
720 720  30000
721 721  
722 722  OK
... ... @@ -723,13 +723,13 @@
723 723  
724 724  the interval is 30000ms = 30s
725 725  )))
726 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
734 +|AT+TDC=60000|Set Transmit Interval|(((
727 727  OK
728 728  
729 729  Set transmit interval to 60000ms = 60 seconds
730 730  )))
731 731  
732 -(% style="color:#037691" %)**Downlink Command: 0x01**
740 +**Downlink Command: 0x01**
733 733  
734 734  Format: Command Code (0x01) followed by 3 bytes time value.
735 735  
... ... @@ -738,18 +738,32 @@
738 738  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
739 739  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
740 740  
749 +1.
750 +11. Set Interrupt Mode
741 741  
742 -== 3.2 Set Interrupt Mode ==
743 -
744 744  Feature, Set Interrupt mode for GPIO_EXIT.
745 745  
746 -(% style="color:#037691" %)**AT Command: AT+INTMOD**
754 +**AT Command: AT+INTMOD**
747 747  
748 -[[image:image-20220607153759-6.png]]
756 +|**Command Example**|**Function**|**Response**
757 +|AT+INTMOD=?|Show current interrupt mode|(((
758 +0
749 749  
760 +OK
750 750  
751 -(% style="color:#037691" %)**Downlink Command: 0x06**
762 +the mode is 0 = No interruption
763 +)))
764 +|AT+INTMOD=2|(((
765 +Set Transmit Interval
752 752  
767 +1. (Disable Interrupt),
768 +1. (Trigger by rising and falling edge),
769 +1. (Trigger by falling edge)
770 +1. (Trigger by rising edge)
771 +)))|OK
772 +
773 +**Downlink Command: 0x06**
774 +
753 753  Format: Command Code (0x06) followed by 3 bytes.
754 754  
755 755  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
... ... @@ -757,21 +757,25 @@
757 757  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
758 758  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
759 759  
782 +1.
783 +11. Calibrate Sensor
760 760  
761 -== 3.3 Calibrate Sensor ==
785 +Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands
762 762  
763 -Detail See [[Calibration Guide>>||anchor="2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
764 764  
765 765  
789 +1.
790 +11. Get Firmware Version Info
766 766  
767 -== 3.4 Get Firmware Version Info ==
768 -
769 769  Feature: use downlink to get firmware version.
770 770  
771 -(% style="color:#037691" %)**Downlink Command: 0x26**
772 772  
773 -[[image:image-20220607154718-7.png]]
795 +**Downlink Command: 0x26**
774 774  
797 +
798 +|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
799 +|Get Firmware Version Info|Any|26|2
800 +
775 775  * Reply to the confirmation package: 26 01
776 776  * Reply to non-confirmed packet: 26 00
777 777  
... ... @@ -779,10 +779,11 @@
779 779  
780 780  Configures info payload:
781 781  
782 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
783 -|=(((
784 -**Size(bytes)**
785 -)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
808 +|(((
809 +**Size**
810 +
811 +**(bytes)**
812 +)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**
786 786  |**Value**|Software Type|(((
787 787  Frequency
788 788  
... ... @@ -792,7 +792,10 @@
792 792  
793 793  Version
794 794  )))|Sensor Type|Reserve|(((
795 -[[Message Type>>||anchor="H2.3.6MessageType"]]
822 +[[Message>>path:#Message_Type]]
823 +
824 +[[Type>>path:#Message_Type]]
825 +
796 796  Always 0x02
797 797  )))
798 798  
image-20220607153237-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.9 KB
Content
image-20220607153759-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
image-20220607154718-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0