Last modified by Mengting Qiu on 2025/04/07 16:25
<
From version < 26.2 >
edited by Xiaoling
on 2022/06/07 14:57
To version < 34.9 >
edited by Xiaoling
on 2022/06/07 16:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -265,8 +265,6 @@
265 265  |0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
266 266  |0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
267 267  
268 -
269 -
270 270  === 2.3.7 Decode payload in The Things Network ===
271 271  
272 272  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -407,7 +407,6 @@
407 407  [[image:image-20220607144936-3.png]]
408 408  
409 409  
410 -
411 411  (% style="color:#037691" %)**Calibration Payload**
412 412  
413 413  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
... ... @@ -437,18 +437,17 @@
437 437  * Reply to the confirmation package: 14 01
438 438  * Reply to non-confirmed packet: 14 00
439 439  
437 +== 2.8 Frequency Plans ==
440 440  
441 -
442 -Frequency Plans
443 -
439 +(((
444 444  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
441 +)))
445 445  
446 -1.
447 -11.
448 -111. EU863-870 (EU868)
449 449  
450 -Uplink:
444 +=== 2.8.1 EU863-870 (EU868) ===
451 451  
446 +(% style="color:blue" %)**Uplink:**
447 +
452 452  868.1 - SF7BW125 to SF12BW125
453 453  
454 454  868.3 - SF7BW125 to SF12BW125 and SF7BW250
... ... @@ -468,7 +468,7 @@
468 468  868.8 - FSK
469 469  
470 470  
471 -Downlink:
467 +(% style="color:blue" %)**Downlink:**
472 472  
473 473  Uplink channels 1-9 (RX1)
474 474  
... ... @@ -475,28 +475,30 @@
475 475  869.525 - SF9BW125 (RX2 downlink only)
476 476  
477 477  
478 -1.
479 -11.
480 -111. US902-928(US915)
481 481  
475 +=== 2.8.2 US902-928(US915) ===
476 +
477 +(((
482 482  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
479 +)))
483 483  
484 -
481 +(((
485 485  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
483 +)))
486 486  
487 -
485 +(((
488 488  After Join success, the end node will switch to the correct sub band by:
487 +)))
489 489  
490 490  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
491 491  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
492 492  
493 -1.
494 -11.
495 -111. CN470-510 (CN470)
496 496  
493 +=== 2.8.3 CN470-510 (CN470) ===
494 +
497 497  Used in China, Default use CHE=1
498 498  
499 -Uplink:
497 +(% style="color:blue" %)**Uplink:**
500 500  
501 501  486.3 - SF7BW125 to SF12BW125
502 502  
... ... @@ -515,7 +515,7 @@
515 515  487.7 - SF7BW125 to SF12BW125
516 516  
517 517  
518 -Downlink:
516 +(% style="color:blue" %)**Downlink:**
519 519  
520 520  506.7 - SF7BW125 to SF12BW125
521 521  
... ... @@ -536,26 +536,31 @@
536 536  505.3 - SF12BW125 (RX2 downlink only)
537 537  
538 538  
539 -1.
540 -11.
541 -111. AU915-928(AU915)
542 542  
538 +=== 2.8.4 AU915-928(AU915) ===
539 +
540 +(((
543 543  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
542 +)))
544 544  
545 -
544 +(((
546 546  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
546 +)))
547 547  
548 +(((
549 +
550 +)))
548 548  
552 +(((
549 549  After Join success, the end node will switch to the correct sub band by:
554 +)))
550 550  
551 551  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
552 552  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
553 553  
554 -1.
555 -11.
556 -111. AS920-923 & AS923-925 (AS923)
559 +=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
557 557  
558 -**Default Uplink channel:**
561 +(% style="color:blue" %)**Default Uplink channel:**
559 559  
560 560  923.2 - SF7BW125 to SF10BW125
561 561  
... ... @@ -562,12 +562,13 @@
562 562  923.4 - SF7BW125 to SF10BW125
563 563  
564 564  
565 -**Additional Uplink Channel**:
568 +(% style="color:blue" %)**Additional Uplink Channel**:
566 566  
567 567  (OTAA mode, channel added by JoinAccept message)
568 568  
569 -**AS920~~AS923 for Japan, Malaysia, Singapore**:
570 570  
573 +(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
574 +
571 571  922.2 - SF7BW125 to SF10BW125
572 572  
573 573  922.4 - SF7BW125 to SF10BW125
... ... @@ -581,7 +581,7 @@
581 581  922.0 - SF7BW125 to SF10BW125
582 582  
583 583  
584 -**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
588 +(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
585 585  
586 586  923.6 - SF7BW125 to SF10BW125
587 587  
... ... @@ -596,20 +596,18 @@
596 596  924.6 - SF7BW125 to SF10BW125
597 597  
598 598  
603 +(% style="color:blue" %)**Downlink:**
599 599  
600 -**Downlink:**
601 -
602 602  Uplink channels 1-8 (RX1)
603 603  
604 604  923.2 - SF10BW125 (RX2)
605 605  
606 606  
607 -1.
608 -11.
609 -111. KR920-923 (KR920)
610 610  
611 -Default channel:
611 +=== 2.8.6 KR920-923 (KR920) ===
612 612  
613 +(% style="color:blue" %)**Default channel:**
614 +
613 613  922.1 - SF7BW125 to SF12BW125
614 614  
615 615  922.3 - SF7BW125 to SF12BW125
... ... @@ -617,7 +617,7 @@
617 617  922.5 - SF7BW125 to SF12BW125
618 618  
619 619  
620 -Uplink: (OTAA mode, channel added by JoinAccept message)
622 +(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
621 621  
622 622  922.1 - SF7BW125 to SF12BW125
623 623  
... ... @@ -634,7 +634,7 @@
634 634  923.3 - SF7BW125 to SF12BW125
635 635  
636 636  
637 -Downlink:
639 +(% style="color:blue" %)**Downlink:**
638 638  
639 639  Uplink channels 1-7(RX1)
640 640  
... ... @@ -641,11 +641,9 @@
641 641  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
642 642  
643 643  
644 -1.
645 -11.
646 -111. IN865-867 (IN865)
646 +=== 2.8.7 IN865-867 (IN865) ===
647 647  
648 -Uplink:
648 +(% style="color:blue" %)**Uplink:**
649 649  
650 650  865.0625 - SF7BW125 to SF12BW125
651 651  
... ... @@ -654,7 +654,7 @@
654 654  865.9850 - SF7BW125 to SF12BW125
655 655  
656 656  
657 -Downlink:
657 +(% style="color:blue" %)**Downlink:**
658 658  
659 659  Uplink channels 1-3 (RX1)
660 660  
... ... @@ -661,45 +661,39 @@
661 661  866.550 - SF10BW125 (RX2)
662 662  
663 663  
664 -1.
665 -11. LED Indicator
666 666  
665 +== 2.9 LED Indicator ==
666 +
667 667  The LSPH01 has an internal LED which is to show the status of different state.
668 668  
669 -
670 670  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
671 671  * Blink once when device transmit a packet.
672 672  
673 -1.
674 -11. ​Firmware Change Log
675 675  
676 -**Firmware download link:**
677 677  
678 -[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
679 679  
675 +== 2.10 ​Firmware Change Log ==
680 680  
681 -**Firmware Upgrade Method:**
682 682  
683 -[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
678 +**Firmware download link:**
684 684  
680 +[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
685 685  
686 686  
683 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
687 687  
688 688  
689 689  
690 -1. Configure LSPH01 via AT Command or LoRaWAN Downlink
687 += 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
691 691  
692 692  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
693 693  
694 -* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
695 -* LoRaWAN Downlink instruction for different platforms:
691 +* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
692 +* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
696 696  
697 -[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
698 -
699 -
700 700  There are two kinds of commands to configure LSPH01, they are:
701 701  
702 -* **General Commands**.
696 +* (% style="color:#4f81bd" %)** General Commands**.
703 703  
704 704  These commands are to configure:
705 705  
... ... @@ -706,25 +706,25 @@
706 706  * General system settings like: uplink interval.
707 707  * LoRaWAN protocol & radio related command.
708 708  
709 -They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
703 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
710 710  
711 -[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
712 712  
706 +* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
713 713  
714 -* **Commands special design for LSPH01**
715 -
716 716  These commands only valid for LSPH01, as below:
717 717  
718 718  
719 -1.
720 -11. Set Transmit Interval Time
721 721  
712 +== 3.1 Set Transmit Interval Time ==
713 +
722 722  Feature: Change LoRaWAN End Node Transmit Interval.
723 723  
724 -**AT Command: AT+TDC**
716 +(% style="color:#037691" %)**AT Command: AT+TDC**
725 725  
726 -|**Command Example**|**Function**|**Response**
727 -|AT+TDC=?|Show current transmit Interval|(((
718 +
719 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
720 +|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
721 +|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
728 728  30000
729 729  
730 730  OK
... ... @@ -731,13 +731,13 @@
731 731  
732 732  the interval is 30000ms = 30s
733 733  )))
734 -|AT+TDC=60000|Set Transmit Interval|(((
728 +|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
735 735  OK
736 736  
737 737  Set transmit interval to 60000ms = 60 seconds
738 738  )))
739 739  
740 -**Downlink Command: 0x01**
734 +(% style="color:#037691" %)**Downlink Command: 0x01**
741 741  
742 742  Format: Command Code (0x01) followed by 3 bytes time value.
743 743  
... ... @@ -746,32 +746,18 @@
746 746  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
747 747  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
748 748  
749 -1.
750 -11. Set Interrupt Mode
751 751  
744 +== 3.2 Set Interrupt Mode ==
745 +
752 752  Feature, Set Interrupt mode for GPIO_EXIT.
753 753  
754 -**AT Command: AT+INTMOD**
748 +(% style="color:#037691" %)**AT Command: AT+INTMOD**
755 755  
756 -|**Command Example**|**Function**|**Response**
757 -|AT+INTMOD=?|Show current interrupt mode|(((
758 -0
750 +[[image:image-20220607153759-6.png]]
759 759  
760 -OK
761 761  
762 -the mode is 0 = No interruption
763 -)))
764 -|AT+INTMOD=2|(((
765 -Set Transmit Interval
753 +(% style="color:#037691" %)**Downlink Command: 0x06**
766 766  
767 -1. (Disable Interrupt),
768 -1. (Trigger by rising and falling edge),
769 -1. (Trigger by falling edge)
770 -1. (Trigger by rising edge)
771 -)))|OK
772 -
773 -**Downlink Command: 0x06**
774 -
775 775  Format: Command Code (0x06) followed by 3 bytes.
776 776  
777 777  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
... ... @@ -779,25 +779,21 @@
779 779  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
780 780  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
781 781  
782 -1.
783 -11. Calibrate Sensor
784 784  
785 -Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands
763 +== 3.3 Calibrate Sensor ==
786 786  
765 +Detail See [[Calibration Guide>>||anchor="2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
787 787  
788 788  
789 -1.
790 -11. Get Firmware Version Info
791 791  
769 +== 3.4 Get Firmware Version Info ==
770 +
792 792  Feature: use downlink to get firmware version.
793 793  
773 +(% style="color:#037691" %)**Downlink Command: 0x26**
794 794  
795 -**Downlink Command: 0x26**
775 +[[image:image-20220607154718-7.png]]
796 796  
797 -
798 -|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
799 -|Get Firmware Version Info|Any|26|2
800 -
801 801  * Reply to the confirmation package: 26 01
802 802  * Reply to non-confirmed packet: 26 00
803 803  
... ... @@ -805,11 +805,10 @@
805 805  
806 806  Configures info payload:
807 807  
808 -|(((
809 -**Size**
810 -
811 -**(bytes)**
812 -)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**
784 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
785 +|=(((
786 +**Size(bytes)**
787 +)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**
813 813  |**Value**|Software Type|(((
814 814  Frequency
815 815  
... ... @@ -819,10 +819,7 @@
819 819  
820 820  Version
821 821  )))|Sensor Type|Reserve|(((
822 -[[Message>>path:#Message_Type]]
823 -
824 -[[Type>>path:#Message_Type]]
825 -
797 +[[Message Type>>||anchor="H2.3.6MessageType"]]
826 826  Always 0x02
827 827  )))
828 828  
... ... @@ -876,18 +876,19 @@
876 876  
877 877  
878 878  
851 += 4. Battery & How to replace =
879 879  
853 +== 4.1 Battery Type ==
880 880  
881 -
882 -1. Battery & How to replace
883 -11. Battery Type
884 -
855 +(((
885 885  LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
857 +)))
886 886  
887 -
859 +(((
888 888  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
861 +)))
889 889  
890 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]
863 +[[image:1654588469844-778.png]]
891 891  
892 892  
893 893  Minimum Working Voltage for the LSPH01:
... ... @@ -895,30 +895,36 @@
895 895  LSPH01:  2.45v ~~ 3.6v
896 896  
897 897  
898 -1.
899 -11. Replace Battery
900 900  
872 +== 4.2 Replace Battery ==
873 +
874 +(((
901 901  Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
876 +)))
902 902  
878 +(((
903 903  And make sure the positive and negative pins match.
880 +)))
904 904  
905 905  
906 906  
907 -1.
908 -11. Power Consumption Analyze
884 +== 4.3 Power Consumption Analyze ==
909 909  
886 +(((
910 910  Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
888 +)))
911 911  
912 -
890 +(((
913 913  Instruction to use as below:
892 +)))
914 914  
915 915  
916 -Step 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
895 +**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:
917 917  
918 918  [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
919 919  
920 920  
921 -Step 2: Open it and choose
900 +**Step 2**: Open it and choose
922 922  
923 923  * Product Model
924 924  * Uplink Interval
... ... @@ -926,64 +926,62 @@
926 926  
927 927  And the Life expectation in difference case will be shown on the right.
928 928  
929 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]
908 +[[image:1654588577573-122.png]]
930 930  
931 931  
932 932  The battery related documents as below:
933 933  
934 -* [[Battery Dimension>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]],
935 -* [[Lithium-Thionyl Chloride Battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]] datasheet
936 -* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
937 -
938 -|(((
939 -JST-XH-2P connector
913 +* (((
914 +[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],
940 940  )))
916 +* (((
917 +[[Lithium-Thionyl Chloride Battery  datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],
918 +)))
919 +* (((
920 +[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
921 +)))
941 941  
942 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]
923 +[[image:image-20220607155856-8.png]]
943 943  
944 944  
945 945  
946 -1.
947 -11.
948 -111. ​Battery Note
927 +=== 4.3.1 ​Battery Note ===
949 949  
929 +(((
950 950  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
931 +)))
951 951  
952 952  
953 -1.
954 -11.
955 -111. ​Replace the battery
956 956  
935 +=== ​4.3.2 Replace the battery ===
936 +
957 957  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
958 958  
959 -
960 960  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
961 961  
962 962  
963 963  
943 += 5. Use AT Command =
964 964  
945 +== 5.1 Access AT Commands ==
965 965  
966 -
967 -1. Use AT Command
968 -11. Access AT Commands
969 -
970 970  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
971 971  
972 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
949 +[[image:1654589001411-343.png]]
973 973  
974 -Connection:
951 +**Connection:**
975 975  
976 -USB TTL GND <~-~-~-~-> GND
953 +(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
977 977  
978 -USB TTL TXD <~-~-~-~-> UART_RXD
955 +(% style="background-color:yellow" %)** USB TTL TXD  <~-~-~-~-> UART_RXD**
979 979  
980 -USB TTL RXD <~-~-~-~-> UART_TXD
957 +(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
981 981  
982 982  
983 -In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
960 +In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
984 984  
985 985  
986 - [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
963 + [[image:1654589062541-567.png]]
987 987  
988 988  Valid AT Command please check [[Configure Device>>path:#Configure_Device]].
989 989  
... ... @@ -990,38 +990,43 @@
990 990  
991 991  
992 992  
993 -1. FAQ
994 -11. How to change the LoRa Frequency Bands/Region
970 += 6. FAQ =
995 995  
996 -You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].
972 +== 6.1 How to change the LoRa Frequency Bands/Region ==
973 +
974 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
997 997  When downloading the images, choose the required image file for download. ​
998 998  
999 999  
1000 1000  
1001 -1. Trouble Shooting
1002 -11. AT Commands input doesn’t work
979 += 7. Trouble Shooting =
1003 1003  
1004 -In the case if user can see the console output but can’t type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn’t send **ENTER** while press the send key, user need to add ENTER in their string.
981 +== 7.1 AT Commands input doesn’t work ==
1005 1005  
983 +In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1006 1006  
1007 -1. Order Info
1008 1008  
1009 -Part Number: **LSPH01-XX**
1010 1010  
987 += 8. Order Info =
1011 1011  
1012 -**XX**: The default frequency band
989 +Part Number: (% style="color:blue" %)**LSPH01-XX**
1013 1013  
1014 -* **AS923**: LoRaWAN AS923 band
1015 -* **AU915**: LoRaWAN AU915 band
1016 -* **EU433**: LoRaWAN EU433 band
1017 -* **EU868**: LoRaWAN EU868 band
1018 -* **KR920**: LoRaWAN KR920 band
1019 -* **US915**: LoRaWAN US915 band
1020 -* **IN865**: LoRaWAN IN865 band
1021 -* **CN470**: LoRaWAN CN470 band
1022 1022  
1023 -1. ​Packing Info
992 +(% style="color:blue" %)**XX**(%%): The default frequency band
1024 1024  
994 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
995 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
996 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
997 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
998 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
999 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1000 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1001 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1002 +
1003 +
1004 += 9. ​Packing Info =
1005 +
1006 +
1025 1025  **Package Includes**:
1026 1026  
1027 1027  * LSPH01 LoRaWAN Soil Ph Sensor x 1
1654588469844-778.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654588577573-122.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654589001411-343.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654589062541-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607153237-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.9 KB
Content
image-20220607153759-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content
image-20220607154718-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.0 KB
Content
image-20220607155856-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0