Last modified by Xiaoling on 2025/04/24 17:18
<
From version < 13.2 >
edited by Xiaoling
on 2022/06/07 14:04
To version < 26.15 >
edited by Xiaoling
on 2022/06/07 15:14
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,7 +5,9 @@
5 5  
6 6  
7 7  
8 +**Contents:**
8 8  
10 +{{toc/}}
9 9  
10 10  
11 11  
... ... @@ -15,6 +15,9 @@
15 15  
16 16  
17 17  
20 +
21 +
22 +
18 18  = 1. Introduction =
19 19  
20 20  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
... ... @@ -50,7 +50,6 @@
50 50  * IP68 rate for the Sensor Probe
51 51  * 8500mAh Battery for long term use
52 52  
53 -
54 54  == 1.3 Probe Specification ==
55 55  
56 56  
... ... @@ -71,13 +71,10 @@
71 71  * IP68 Protection
72 72  * Length: 3.5 meters
73 73  
74 -
75 -
76 76  == 1.4 ​Applications ==
77 77  
78 78  * Smart Agriculture
79 79  
80 -
81 81  == 1.5 Pin mapping and power on ==
82 82  
83 83  [[image:1654580482666-473.png]]
... ... @@ -112,7 +112,7 @@
112 112  )))
113 113  
114 114  (((
115 -**Step 1**: Create a device in TTN with the OTAA keys from LSPH01.
116 +(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.
116 116  )))
117 117  
118 118  (((
... ... @@ -149,7 +149,7 @@
149 149  [[image:1654581517630-991.png]]
150 150  
151 151  
152 -**Step 2**: Power on LSPH01
153 +(% style="color:blue" %)**Step 2**(%%): Power on LSPH01
153 153  
154 154  
155 155  Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).
... ... @@ -157,7 +157,7 @@
157 157  [[image:image-20220607135918-2.png]]
158 158  
159 159  
160 -**Step 3:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
161 +(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
161 161  
162 162  [[image:1654581590132-631.png]]
163 163  
... ... @@ -177,18 +177,14 @@
177 177  
178 178  **(bytes)**
179 179  )))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
180 -|**Value**|[[BAT>>path:#bat]]|(((
181 -[[Temperature>>path:#DS18B20]]
181 +|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((
182 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
182 182  
183 -[[( Optional )>>path:#DS18B20]]
184 -)))|[[Soil pH>>path:#Soil_Nitrogen]]|[[Soil Temperature>>path:#Soil_Phosphorus]]|(((
185 -[[Digital Interrupt>>path:#Int_pin]]
186 -
187 -[[(Optional)>>path:#Int_pin]]
184 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
185 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
186 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
188 188  )))|Reserve|(((
189 -[[Message>>path:#Message_Type]]
190 -
191 -[[Type>>path:#Message_Type]]
188 +[[Message Type>>||anchor="H2.3.6MessageType"]]
192 192  )))
193 193  
194 194  [[image:1654581735133-458.png]]
... ... @@ -219,40 +219,35 @@
219 219  
220 220  
221 221  
222 -1.
223 -11.
224 -111. Soil pH
219 +=== 2.3.3 Soil pH ===
225 225  
226 226  Range: 0 ~~ 14 pH
227 227  
228 -Example:
223 +**Example:**
229 229  
230 -**0x02B7(H) = 695(D) = 6.95pH**
225 +(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**
231 231  
232 232  
233 -1.
234 -11.
235 -111. Soil Temperature
236 236  
229 +=== 2.3.4 Soil Temperature ===
230 +
237 237  Get Soil Temperature 
238 238  
239 239  
240 240  **Example**:
241 241  
242 -If payload is: 0105H:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
236 +If payload is: **0105H**:  (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree
243 243  
244 -If payload is: FF3FH :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
238 +If payload is: **FF3FH** :  (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
245 245  
246 246  
247 247  
248 -1.
249 -11.
250 -111. Interrupt Pin
242 +=== 2.3.5 Interrupt Pin ===
251 251  
252 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#Int_mod]] for the hardware and software set up.
244 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
253 253  
254 254  
255 -Example:
247 +**Example:**
256 256  
257 257  0x00: Normal uplink packet.
258 258  
... ... @@ -259,183 +259,163 @@
259 259  0x01: Interrupt Uplink Packet.
260 260  
261 261  
262 -1.
263 -11.
264 -111. Message Type
265 265  
255 +=== 2.3.6 Message Type ===
256 +
266 266  For a normal uplink payload, the message type is always 0x01.
267 267  
268 268  Valid Message Type:
269 269  
270 270  
271 -|Message Type Code|Description|Payload
272 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#Normal_Uplink]]
273 -|0x02|Reply configures info|[[Configure Info Payload>>path:#Configure_Info_Payload]]
274 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#Calibration_Payload]]
262 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
263 +|**Message Type Code**|**Description**|**Payload**
264 +|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3Uplink Payload"]]
265 +|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
266 +|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
275 275  
276 -1.
277 -11.
278 -111. ​Decode payload in The Things Network
268 +=== 2.3.7 Decode payload in The Things Network ===
279 279  
280 280  While using TTN network, you can add the payload format to decode the payload.
281 281  
282 282  
283 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
273 +[[image:1654582541848-906.png]]
284 284  
275 +(((
285 285  The payload decoder function for TTN is here:
277 +)))
286 286  
279 +(((
287 287  LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
281 +)))
288 288  
289 289  
290 -1.
291 -11. Uplink Interval
292 292  
293 -The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
285 +== 2.4 Uplink Interval ==
294 294  
295 -[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval>>url:http://wiki.dragino.com/index.php?title=End_Device_AT_Commands_and_Downlink_Commands#Change_Uplink_Interval]]
287 +The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
296 296  
297 297  
298 298  
299 -1.
300 -11. ​Show Data in DataCake IoT Server
291 +== 2.5 ​Show Data in DataCake IoT Server ==
301 301  
302 302  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
303 303  
304 304  
305 -**Step 1**: Be sure that your device is programmed and properly connected to the network at this time.
296 +(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
306 306  
307 -**Step 2**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
298 +(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
308 308  
309 309  
310 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
301 +[[image:1654583683416-869.png]]
311 311  
312 312  
313 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
304 +[[image:1654583694084-878.png]]
314 314  
315 315  
316 -Step 3: Create an account or log in Datacake.
307 +(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
317 317  
318 -Step 4: Create LSPH01 product.
309 +(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**
319 319  
320 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
311 +[[image:1654583711590-413.png]]
321 321  
322 322  
323 323  
324 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
315 +[[image:1654583732798-193.png]]
325 325  
326 326  
327 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
318 +[[image:1654583749683-259.png]]
328 328  
329 329  
330 -Step 5: add payload decode
321 +(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
331 331  
332 332  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
333 333  
334 334  
335 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
326 +[[image:1654583770974-935.png]]
336 336  
337 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
328 +[[image:1654583781517-146.png]]
338 338  
339 339  
340 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
331 +[[image:1654583791351-557.png]]
341 341  
342 342  
343 343  After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
344 344  
345 345  
346 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
337 +[[image:1654583805491-713.png]]
347 347  
348 348  
349 349  
341 +== 2.6 Installation and Maintain ==
350 350  
343 +=== 2.6.1 Before measurement ===
351 351  
352 -1.
353 -11. Installation and Maintain
354 -111. Before measurement
355 -
345 +(((
356 356  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
347 +)))
357 357  
358 358  
359 -1.
360 -11.
361 -111. Measurement
362 362  
363 -**Measurement the soil surface**
351 +=== 2.6.2 Measurement ===
364 364  
365 365  
366 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]] Choose the proper measuring position. Split the surface soil according to the measured deep.
354 +(% style="color:#4f81bd" %)**Measurement the soil surface:**
367 367  
356 +[[image:1654584128046-287.png]]
368 368  
358 +Choose the proper measuring position. Split the surface soil according to the measured deep.
359 +
369 369  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
370 370  
371 -
372 372  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
373 373  
374 -
375 375  Put soil over the probe after insert. And start to measure.
376 376  
377 377  
378 -**Measurement inside soil**
367 +(% style="color:#4f81bd" %)**Measurement inside soil:**
379 379  
380 -
381 -
382 382  Dig a hole with diameter > 20CM.
383 383  
384 -
385 385  Insert the probe inside, method like measure the surface.
386 386  
387 387  
388 -1.
389 -11.
390 -111. Maintain Probe
391 -1111. pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.
392 -1111. After long time use (3~~ 6  months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.
393 -1111. Probe reference electrode is also no strong, need to avoid strong force or hitting.
394 -1111. User should keep reference electrode wet while not use.
395 -1111. Avoid the probes to touch oily matter. Which will cause issue in accuracy.
396 -1111. The probe is IP68 can be put in water.
397 397  
398 -1.
399 -11. Calibration
375 +=== 2.6.3 Maintain Probe ===
400 400  
401 -User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
377 +1. (((
378 +pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.
379 +)))
380 +1. (((
381 +After long time use (3~~ 6  months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.
382 +)))
383 +1. (((
384 +Probe reference electrode is also no strong, need to avoid strong force or hitting.
385 +)))
386 +1. (((
387 +User should keep reference electrode wet while not use.
388 +)))
389 +1. (((
390 +Avoid the probes to touch oily matter. Which will cause issue in accuracy.
391 +)))
392 +1. (((
393 +The probe is IP68 can be put in water.
402 402  
403 403  
404 -**After stable, user can use below command to calibrate.**
405 -
406 -
407 -|**pH buffer solution**|**AT Command to calibrate**|**Downlink Command**|**Read Cal Value**
408 -|**4.00**|**AT+PHCAL=4**|(((
409 -**0x13 04**
410 -
411 -**Reply with Calibrate payload**
412 -)))|(((
413 -**AT+PHCAL=?**
414 -
415 -**Example 41,61,91**
396 +
416 416  )))
417 -|**6.86**|**AT+PHCAL=6**|(((
418 -**0x13 06**
419 419  
420 -**Reply with Calibrate payload**
421 -)))|**AT+PHCAL=?**
422 -|**9.18**|**AT+PHCAL=9**|(((
423 -**0x13 09**
399 +== 2.7 Calibration ==
424 424  
425 -**Reply with Calibrate payload**
426 -)))|**AT+PHCAL=?**
427 -|**Factory Default**|**AT+PHCAL=15**|(((
428 -**0x13 15**
401 +User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
429 429  
430 -**Reply with Calibrate payload**
431 -)))|(((
432 -**AT+PHCAL=?**
403 +After stable, user can use below command to calibrate.
433 433  
434 -**Example 151**
435 -)))
405 +[[image:image-20220607144936-3.png]]
436 436  
437 -Calibration Payload
438 438  
408 +(% style="color:#037691" %)**Calibration Payload**
409 +
410 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
439 439  |(((
440 440  **Size**
441 441  
... ... @@ -450,33 +450,33 @@
450 450  
451 451  Calibrate value
452 452  )))|Reserve|(((
453 -[[Message>>path:#Message_Type]]
425 +[[Message Type>>||anchor="H2.3.6MessageType"]]
454 454  
455 -[[Type>>path:#Message_Type]]
456 -
457 457  Always 0x03
458 458  )))
459 459  
460 -User can also send 0x14 downlink command to poll the current calibration payload.
461 461  
462 462  
463 -|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**
464 -|Get Calibration Version Info|Any|14|2
432 +User can also send 0x14 downlink command to poll the current calibration payload.
465 465  
434 +[[image:image-20220607145603-4.png]]
435 +
466 466  * Reply to the confirmation package: 14 01
467 467  * Reply to non-confirmed packet: 14 00
468 468  
469 -1.
470 -11. Frequency Plans
471 471  
440 +
441 +== 2.8 Frequency Plans ==
442 +
443 +(((
472 472  The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
445 +)))
473 473  
474 -1.
475 -11.
476 -111. EU863-870 (EU868)
477 477  
478 -Uplink:
448 +=== 2.8.1 EU863-870 (EU868) ===
479 479  
450 +(% style="color:blue" %)**Uplink:**
451 +
480 480  868.1 - SF7BW125 to SF12BW125
481 481  
482 482  868.3 - SF7BW125 to SF12BW125 and SF7BW250
... ... @@ -496,7 +496,7 @@
496 496  868.8 - FSK
497 497  
498 498  
499 -Downlink:
471 +(% style="color:blue" %)**Downlink:**
500 500  
501 501  Uplink channels 1-9 (RX1)
502 502  
... ... @@ -503,28 +503,31 @@
503 503  869.525 - SF9BW125 (RX2 downlink only)
504 504  
505 505  
506 -1.
507 -11.
508 -111. US902-928(US915)
509 509  
479 +=== 2.8.2 US902-928(US915) ===
480 +
481 +(((
510 510  Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
483 +)))
511 511  
512 -
485 +(((
513 513  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
487 +)))
514 514  
515 -
489 +(((
516 516  After Join success, the end node will switch to the correct sub band by:
491 +)))
517 517  
518 518  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
519 519  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
520 520  
521 -1.
522 -11.
523 -111. CN470-510 (CN470)
524 524  
497 +
498 +=== 2.8.3 CN470-510 (CN470) ===
499 +
525 525  Used in China, Default use CHE=1
526 526  
527 -Uplink:
502 +(% style="color:blue" %)**Uplink:**
528 528  
529 529  486.3 - SF7BW125 to SF12BW125
530 530  
... ... @@ -543,7 +543,7 @@
543 543  487.7 - SF7BW125 to SF12BW125
544 544  
545 545  
546 -Downlink:
521 +(% style="color:blue" %)**Downlink:**
547 547  
548 548  506.7 - SF7BW125 to SF12BW125
549 549  
... ... @@ -564,38 +564,46 @@
564 564  505.3 - SF12BW125 (RX2 downlink only)
565 565  
566 566  
567 -1.
568 -11.
569 -111. AU915-928(AU915)
570 570  
543 +=== 2.8.4 AU915-928(AU915) ===
544 +
545 +(((
571 571  Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
547 +)))
572 572  
573 -
549 +(((
574 574  To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.
551 +)))
575 575  
553 +(((
554 +
555 +)))
576 576  
557 +(((
577 577  After Join success, the end node will switch to the correct sub band by:
559 +)))
578 578  
579 579  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
580 580  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
581 581  
582 -1.
583 -11.
584 -111. AS920-923 & AS923-925 (AS923)
585 585  
586 -**Default Uplink channel:**
587 587  
566 +=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
567 +
568 +(% style="color:blue" %)**Default Uplink channel:**
569 +
588 588  923.2 - SF7BW125 to SF10BW125
589 589  
590 590  923.4 - SF7BW125 to SF10BW125
591 591  
592 592  
593 -**Additional Uplink Channel**:
575 +(% style="color:blue" %)**Additional Uplink Channel**:
594 594  
595 595  (OTAA mode, channel added by JoinAccept message)
596 596  
597 -**AS920~~AS923 for Japan, Malaysia, Singapore**:
598 598  
580 +(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
581 +
599 599  922.2 - SF7BW125 to SF10BW125
600 600  
601 601  922.4 - SF7BW125 to SF10BW125
... ... @@ -609,7 +609,7 @@
609 609  922.0 - SF7BW125 to SF10BW125
610 610  
611 611  
612 -**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
595 +(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
613 613  
614 614  923.6 - SF7BW125 to SF10BW125
615 615  
... ... @@ -624,20 +624,18 @@
624 624  924.6 - SF7BW125 to SF10BW125
625 625  
626 626  
610 +(% style="color:blue" %)**Downlink:**
627 627  
628 -**Downlink:**
629 -
630 630  Uplink channels 1-8 (RX1)
631 631  
632 632  923.2 - SF10BW125 (RX2)
633 633  
634 634  
635 -1.
636 -11.
637 -111. KR920-923 (KR920)
638 638  
639 -Default channel:
618 +=== 2.8.6 KR920-923 (KR920) ===
640 640  
620 +(% style="color:blue" %)**Default channel:**
621 +
641 641  922.1 - SF7BW125 to SF12BW125
642 642  
643 643  922.3 - SF7BW125 to SF12BW125
... ... @@ -645,7 +645,7 @@
645 645  922.5 - SF7BW125 to SF12BW125
646 646  
647 647  
648 -Uplink: (OTAA mode, channel added by JoinAccept message)
629 +(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
649 649  
650 650  922.1 - SF7BW125 to SF12BW125
651 651  
... ... @@ -662,7 +662,7 @@
662 662  923.3 - SF7BW125 to SF12BW125
663 663  
664 664  
665 -Downlink:
646 +(% style="color:blue" %)**Downlink:**
666 666  
667 667  Uplink channels 1-7(RX1)
668 668  
... ... @@ -669,11 +669,9 @@
669 669  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
670 670  
671 671  
672 -1.
673 -11.
674 -111. IN865-867 (IN865)
653 +=== 2.8.7 IN865-867 (IN865) ===
675 675  
676 -Uplink:
655 +(% style="color:blue" %)**Uplink:**
677 677  
678 678  865.0625 - SF7BW125 to SF12BW125
679 679  
... ... @@ -682,7 +682,7 @@
682 682  865.9850 - SF7BW125 to SF12BW125
683 683  
684 684  
685 -Downlink:
664 +(% style="color:blue" %)**Downlink:**
686 686  
687 687  Uplink channels 1-3 (RX1)
688 688  
... ... @@ -689,32 +689,31 @@
689 689  866.550 - SF10BW125 (RX2)
690 690  
691 691  
692 -1.
693 -11. LED Indicator
694 694  
672 +== 2.9 LED Indicator ==
673 +
695 695  The LSPH01 has an internal LED which is to show the status of different state.
696 696  
697 -
698 698  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
699 699  * Blink once when device transmit a packet.
700 700  
701 -1.
702 -11. ​Firmware Change Log
703 703  
680 +
681 +== 2.10 ​Firmware Change Log ==
682 +
683 +
704 704  **Firmware download link:**
705 705  
706 706  [[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
707 707  
708 708  
709 -**Firmware Upgrade Method:**
689 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
710 710  
711 -[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]
712 712  
713 713  
714 714  
715 715  
716 716  
717 -
718 718  1. Configure LSPH01 via AT Command or LoRaWAN Downlink
719 719  
720 720  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
1654582541848-906.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
1654583683416-869.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
1654583694084-878.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
1654583711590-413.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +246.2 KB
Content
1654583732798-193.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.6 KB
Content
1654583749683-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +129.1 KB
Content
1654583770974-935.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
1654583781517-146.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1654583791351-557.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.3 KB
Content
1654583805491-713.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +127.1 KB
Content
1654584128046-287.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +345.3 KB
Content
image-20220607144936-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.6 KB
Content
image-20220607145603-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +5.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0