LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

76

)))

77

78

(((

79

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

)))

(((

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

)))

(((

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

)))

(((

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

)))

[[image:1654592435432-887.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

102

* Ultra-low power consumption

103

* Monitor soil pH with temperature compensation.

104

* Monitor soil temperature

105

* Monitor Battery Level

106

* Support pH calibration by end user

107

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

108

* AT Commands to change parameters

109

* Uplink on periodically

110

* Downlink to change configure

111

* IP66 Waterproof Enclosure

112

* IP68 rate for the Sensor Probe

113

* 8500mAh Battery for long term use

114

115

116

== 1.3 Probe Specification ==

117

118

119

(% style="color:#4f81bd" %)**Soil pH:**

120

121

* Range: 3 ~~ 10 pH

122

* Resolution: 0.01 pH

123

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

124

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

143

144

[[image:1654592472094-134.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

149

150

== 2.1 How it works ==

151

152

(((

153

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

162

163

(((

164

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

[[image:1654592492399-921.png]]

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

181

)))

182

183

[[image:image-20220607170145-1.jpeg]]

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

188

189

190

**Register the device**

191

192

193

[[image:1654592600093-601.png]]

194

195

196

**Add APP EUI and DEV EUI**

197

198

[[image:1654592619856-881.png]]

199

200

201

**Add APP EUI in the application**

202

203

[[image:1654592632656-512.png]]

**Add APP KEY**

[[image:1654592653453-934.png]]

210

211

212

(% style="color:blue" %)**Step 2**(%%): Power on LSPH01

213

214

215

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

216

217

[[image:image-20220607170442-2.png]]

(((

(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

222

)))

223

224

[[image:1654592697690-910.png]]

== 2.3 Uplink Payload ==

229

230

(((

231

LSPH01 will uplink payload via LoRaWAN with below payload format:

)))

(((

Uplink payload includes in total 11 bytes.

)))

(((

Normal uplink payload:

240

)))

241

242

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

248

|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((

249

[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]

250

251

[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]

252

)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((

253

[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]

254

)))|Reserve|(((

255

[[Message Type>>path:#H2.3.6MessageType]]

256

)))

257

258

[[image:1654592721645-318.png]]

=== 2.3.1 Battery Info ===

263

264

265

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

274

275

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

281

282

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

304

305

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

310

311

This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

317

318

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

323

324

(((

325

For a normal uplink payload, the message type is always 0x01.

)))

(((

Valid Message Type:

)))

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

334

|=**Message Type Code**|=**Description**|=**Payload**

335

|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]

336

|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]

337

|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]

=== 2.3.7 Decode payload in The Things Network ===

342

343

While using TTN network, you can add the payload format to decode the payload.

344

345

346

[[image:1654592762713-715.png]]

347

348

(((

349

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

359

360

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]

== 2.5 Show Data in DataCake IoT Server ==

365

366

(((

367

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

)))

(((

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

)))

[[image:1654592790040-760.png]]

384

385

386

[[image:1654592800389-571.png]]

387

388

389

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

390

391

(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**

392

393

[[image:1654592819047-535.png]]

[[image:1654592833877-762.png]]

398

399

400

[[image:1654592856403-259.png]]

(((

(% style="color:blue" %)**Step 5**(%%)**: add payload decode**

)))

(((

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

[[image:1654592878525-845.png]]

413

414

[[image:1654592892967-474.png]]

415

416

417

[[image:1654592905354-123.png]]

418

419

420

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

421

422

423

[[image:1654592917530-261.png]]

== 2.6 Installation and Maintain ==

428

429

=== 2.6.1 Before measurement ===

(((

(((

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

)))

)))

=== 2.6.2 Measurement ===

(((

(% style="color:#4f81bd" %)**Measurement the soil surface:**

)))

(((

[[image:1654592946732-634.png]]

)))

(((

Choose the proper measuring position. Split the surface soil according to the measured deep.

)))

(((

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

)))

(((

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

)))

(((

Put soil over the probe after insert. And start to measure.

)))

(((

)))

(((

(% style="color:#4f81bd" %)**Measurement inside soil:**

)))

(((

Dig a hole with diameter > 20CM.

)))

(((

Insert the probe inside, method like measure the surface.

)))

=== 2.6.3 Maintain Probe ===

485

486

1. (((

487

pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

488

)))

489

1. (((

490

After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

491

)))

492

1. (((

493

Probe reference electrode is also no strong, need to avoid strong force or hitting.

494

)))

495

1. (((

496

User should keep reference electrode wet while not use.

497

)))

498

1. (((

499

Avoid the probes to touch oily matter. Which will cause issue in accuracy.

500

)))

501

1. (((

502

The probe is IP68 can be put in water.

)))

== 2.7 Calibration ==

509

510

(((

511

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

)))

(((

After stable, user can use below command to calibrate.

516

)))

517

518

[[image:image-20220607171149-4.png]]

519

520

521

(% style="color:#037691" %)**Calibration Payload**

522

523

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message Type>>path:#H2.3.6MessageType]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

544

545

[[image:image-20220607171416-7.jpeg]]

546

547

548

* Reply to the confirmation package: 14 01

549

* Reply to non-confirmed packet: 14 00

== 2.8 Frequency Plans ==

554

555

(((

556

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

)))

=== 2.8.1 EU863-870 (EU868) ===

561

562

(((

563

(% style="color:blue" %)**Uplink:**

)))

(((

868.1 - SF7BW125 to SF12BW125

)))

(((

868.3 - SF7BW125 to SF12BW125 and SF7BW250

)))

(((

868.5 - SF7BW125 to SF12BW125

)))

(((

867.1 - SF7BW125 to SF12BW125

)))

(((

867.3 - SF7BW125 to SF12BW125

)))

(((

867.5 - SF7BW125 to SF12BW125

)))

(((

867.7 - SF7BW125 to SF12BW125

)))

(((

867.9 - SF7BW125 to SF12BW125

)))

(((

868.8 - FSK

)))

(((

)))

(((

(% style="color:blue" %)**Downlink:**

)))

(((

Uplink channels 1-9 (RX1)

)))

(((

869.525 - SF9BW125 (RX2 downlink only)

)))

=== 2.8.2 US902-928(US915) ===

621

622

(((

623

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

After Join success, the end node will switch to the correct sub band by:

632

)))

633

634

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

635

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

=== 2.8.3 CN470-510 (CN470) ===

641

642

Used in China, Default use CHE=1

643

644

(% style="color:blue" %)**Uplink:**

645

646

486.3 - SF7BW125 to SF12BW125

647

648

486.5 - SF7BW125 to SF12BW125

649

650

486.7 - SF7BW125 to SF12BW125

651

652

486.9 - SF7BW125 to SF12BW125

653

654

487.1 - SF7BW125 to SF12BW125

655

656

487.3 - SF7BW125 to SF12BW125

657

658

487.5 - SF7BW125 to SF12BW125

659

660

487.7 - SF7BW125 to SF12BW125

661

662

663

(% style="color:blue" %)**Downlink:**

664

665

506.7 - SF7BW125 to SF12BW125

666

667

506.9 - SF7BW125 to SF12BW125

668

669

507.1 - SF7BW125 to SF12BW125

670

671

507.3 - SF7BW125 to SF12BW125

672

673

507.5 - SF7BW125 to SF12BW125

674

675

507.7 - SF7BW125 to SF12BW125

676

677

507.9 - SF7BW125 to SF12BW125

678

679

508.1 - SF7BW125 to SF12BW125

680

681

505.3 - SF12BW125 (RX2 downlink only)

=== 2.8.4 AU915-928(AU915) ===

686

687

(((

688

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

)))

(((

After Join success, the end node will switch to the correct sub band by:

701

)))

702

703

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

704

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

705

706

707

=== 2.8.5 AS920-923 & AS923-925 (AS923) ===

708

709

(((

710

(% style="color:blue" %)**Default Uplink channel:**

)))

(((

923.2 - SF7BW125 to SF10BW125

)))

(((

923.4 - SF7BW125 to SF10BW125

)))

(((

)))

(((

(% style="color:blue" %)**Additional Uplink Channel**:

)))

(((

(OTAA mode, channel added by JoinAccept message)

)))

(((

)))

(((

(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:

)))

(((

922.2 - SF7BW125 to SF10BW125

)))

(((

922.4 - SF7BW125 to SF10BW125

)))

(((

922.6 - SF7BW125 to SF10BW125

)))

(((

922.8 - SF7BW125 to SF10BW125

)))

(((

923.0 - SF7BW125 to SF10BW125

)))

(((

922.0 - SF7BW125 to SF10BW125

)))

(((

)))

(((

(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

)))

(((

923.6 - SF7BW125 to SF10BW125

)))

(((

923.8 - SF7BW125 to SF10BW125

)))

(((

924.0 - SF7BW125 to SF10BW125

)))

(((

924.2 - SF7BW125 to SF10BW125

)))

(((

924.4 - SF7BW125 to SF10BW125

)))

(((

924.6 - SF7BW125 to SF10BW125

)))

(((

)))

(((

(% style="color:blue" %)**Downlink:**

)))

(((

Uplink channels 1-8 (RX1)

)))

(((

923.2 - SF10BW125 (RX2)

)))

=== 2.8.6 KR920-923 (KR920) ===

816

817

(% style="color:blue" %)**Default channel:**

818

819

922.1 - SF7BW125 to SF12BW125

820

821

922.3 - SF7BW125 to SF12BW125

822

823

922.5 - SF7BW125 to SF12BW125

824

825

826

(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**

827

828

922.1 - SF7BW125 to SF12BW125

829

830

922.3 - SF7BW125 to SF12BW125

831

832

922.5 - SF7BW125 to SF12BW125

833

834

922.7 - SF7BW125 to SF12BW125

835

836

922.9 - SF7BW125 to SF12BW125

837

838

923.1 - SF7BW125 to SF12BW125

839

840

923.3 - SF7BW125 to SF12BW125

841

842

843

(% style="color:blue" %)**Downlink:**

844

845

Uplink channels 1-7(RX1)

846

847

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

=== 2.8.7 IN865-867 (IN865) ===

852

853

(% style="color:blue" %)**Uplink:**

854

855

865.0625 - SF7BW125 to SF12BW125

856

857

865.4025 - SF7BW125 to SF12BW125

858

859

865.9850 - SF7BW125 to SF12BW125

860

861

862

(% style="color:blue" %)**Downlink:**

863

864

Uplink channels 1-3 (RX1)

865

866

866.550 - SF10BW125 (RX2)

== 2.9 LED Indicator ==

871

872

The LSPH01 has an internal LED which is to show the status of different state.

873

874

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

875

* Blink once when device transmit a packet.

876

877

878

== 2.10 Firmware Change Log ==

879

880

881

**Firmware download link:**

882

883

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

884

885

886

**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]

= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =

891

892

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

893

894

* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].

895

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]

896

897

There are two kinds of commands to configure LSPH01, they are:

898

899

* (% style="color:#4f81bd" %)** General Commands**.

900

901

These commands are to configure:

902

903

* General system settings like: uplink interval.

904

* LoRaWAN protocol & radio related command.

905

906

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]

907

908

909

* (% style="color:#4f81bd" %)** Commands special design for LSPH01**

910

911

These commands only valid for LSPH01, as below:

== 3.1 Set Transmit Interval Time ==

916

917

Feature: Change LoRaWAN End Node Transmit Interval.

918

919

(% style="color:#037691" %)**AT Command: AT+TDC**

920

921

[[image:image-20220607171554-8.png]]

(% style="color:#037691" %)**Downlink Command: 0x01**

926

927

Format: Command Code (0x01) followed by 3 bytes time value.

928

929

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

930

931

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

932

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Interrupt Mode ==

937

938

Feature, Set Interrupt mode for GPIO_EXIT.

939

940

(% style="color:#037691" %)**AT Command: AT+INTMOD**

941

942

[[image:image-20220607171716-9.png]]

943

944

945

(% style="color:#037691" %)**Downlink Command: 0x06**

946

947

Format: Command Code (0x06) followed by 3 bytes.

948

949

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

950

951

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

952

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

953

954

== 3.3 Calibrate Sensor ==

955

956

Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands

== 3.4 Get Firmware Version Info ==

961

962

Feature: use downlink to get firmware version.

963

964

(% style="color:#037691" %)**Downlink Command: 0x26**

965

966

[[image:image-20220607171917-10.png]]

967

968

* Reply to the confirmation package: 26 01

969

* Reply to non-confirmed packet: 26 00

970

971

Device will send an uplink after got this downlink command. With below payload:

972

973

Configures info payload:

974

975

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)

976

|=(((

977

**Size(bytes)**

978

)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**

979

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

988

[[Message Type>>path:#H2.3.6MessageType]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

1019

1020

1021

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

= 4. Battery & How to replace =

1043

1044

== 4.1 Battery Type ==

1045

1046

(((

1047

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

)))

(((

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

1052

)))

1053

1054

[[image:1654593587246-335.png]]

1055

1056

1057

Minimum Working Voltage for the LSPH01:

1058

1059

LSPH01: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

1064

1065

(((

1066

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

)))

(((

And make sure the positive and negative pins match.

)))

== 4.3 Power Consumption Analyze ==

1076

1077

(((

1078

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

)))

(((

Instruction to use as below:

)))

**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

1087

1088

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

1089

1090

1091

**Step 2**: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

1098

1099

[[image:1654593605679-189.png]]

1100

1101

1102

The battery related documents as below:

1103

1104

* (((

1105

[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],

1106

)))

1107

* (((

1108

[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],

1109

)))

1110

* (((

1111

[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

1112

)))

1113

1114

[[image:image-20220607172042-11.png]]

=== 4.3.1 Battery Note ===

1119

1120

(((

1121

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

)))

=== 4.3.2 Replace the battery ===

1127

1128

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

1129

1130

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

= 5. Use AT Command =

1135

1136

== 5.1 Access AT Commands ==

1137

1138

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

1139

1140

[[image:1654593668970-604.png]]

**Connection:**

(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**

1145

1146

(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**

1147

1148

(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**

1149

1150

1151

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

1152

1153

1154

[[image:1654593712276-618.png]]

1155

1156

Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].

= 6. FAQ =

== 6.1 How to change the LoRa Frequency Bands/Region ==

1163

1164

You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].

1165

When downloading the images, choose the required image file for download.

= 7. Trouble Shooting =

1170

1171

== 7.1 AT Commands input doesn’t work ==

1172

1173

In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

= 8. Order Info =

Part Number: (% style="color:blue" %)**LSPH01-XX**

1180

1181

1182

(% style="color:blue" %)**XX**(%%): The default frequency band

1183

1184

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1185

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1186

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1187

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1188

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1189

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1190

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1191

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 9. Packing Info =

**Package Includes**:

1197

1198

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1199

1200

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1210

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

1211

1212

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual

Applications

Navigation