LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

76

77

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

78

79

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

80

81

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

82

83

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

84

85

86

[[image:1654592435432-887.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

93

* Ultra-low power consumption

94

* Monitor soil pH with temperature compensation.

95

* Monitor soil temperature

96

* Monitor Battery Level

97

* Support pH calibration by end user

98

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

99

* AT Commands to change parameters

100

* Uplink on periodically

101

* Downlink to change configure

102

* IP66 Waterproof Enclosure

103

* IP68 rate for the Sensor Probe

104

* 8500mAh Battery for long term use

== 1.3 Probe Specification ==

109

110

111

(% style="color:#4f81bd" %)**Soil pH:**

112

113

* Range: 3 ~~ 10 pH

114

* Resolution: 0.01 pH

115

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

116

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

137

138

[[image:1654592472094-134.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

143

144

== 2.1 How it works ==

145

146

(((

147

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

156

157

(((

158

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

[[image:1654592492399-921.png]]

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

175

)))

176

177

[[image:image-20220607170145-1.jpeg]]

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

182

183

184

**Register the device**

185

186

187

[[image:1654592600093-601.png]]

188

189

190

**Add APP EUI and DEV EUI**

191

192

[[image:1654592619856-881.png]]

193

194

195

**Add APP EUI in the application**

196

197

[[image:1654592632656-512.png]]

**Add APP KEY**

[[image:1654592653453-934.png]]

204

205

206

(% style="color:blue" %)**Step 2**(%%): Power on LSPH01

207

208

209

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

210

211

[[image:image-20220607170442-2.png]]

212

213

214

(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

215

216

[[image:1654592697690-910.png]]

== 2.3 Uplink Payload ==

221

222

LSPH01 will uplink payload via LoRaWAN with below payload format:

223

224

Uplink payload includes in total 11 bytes.

225

226

Normal uplink payload:

227

228

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

234

|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((

235

[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]

236

237

[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]

238

)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((

239

[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]

240

)))|Reserve|(((

241

[[Message Type>>path:#H2.3.6MessageType]]

242

)))

243

244

[[image:1654592721645-318.png]]

=== 2.3.1 Battery Info ===

249

250

251

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

260

261

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

267

268

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

290

291

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

296

297

This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

303

304

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

309

310

For a normal uplink payload, the message type is always 0x01.

Valid Message Type:

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

316

|**Message Type Code**|**Description**|**Payload**

317

|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]

318

|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]

319

|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]

=== 2.3.7 Decode payload in The Things Network ===

325

326

While using TTN network, you can add the payload format to decode the payload.

327

328

329

[[image:1654592762713-715.png]]

330

331

(((

332

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

342

343

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]

== 2.5 Show Data in DataCake IoT Server ==

348

349

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

350

351

352

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

353

354

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

355

356

357

[[image:1654592790040-760.png]]

358

359

360

[[image:1654592800389-571.png]]

361

362

363

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

364

365

(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**

366

367

[[image:1654592819047-535.png]]

[[image:1654592833877-762.png]]

372

373

374

[[image:1654592856403-259.png]]

375

376

377

(% style="color:blue" %)**Step 5**(%%)**: add payload decode**

378

379

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

380

381

382

[[image:1654592878525-845.png]]

383

384

[[image:1654592892967-474.png]]

385

386

387

[[image:1654592905354-123.png]]

388

389

390

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

391

392

393

[[image:1654592917530-261.png]]

== 2.6 Installation and Maintain ==

398

399

=== 2.6.1 Before measurement ===

400

401

(((

402

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

)))

=== 2.6.2 Measurement ===

408

409

410

(% style="color:#4f81bd" %)**Measurement the soil surface:**

411

412

[[image:1654592946732-634.png]]

413

414

Choose the proper measuring position. Split the surface soil according to the measured deep.

415

416

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

417

418

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

419

420

Put soil over the probe after insert. And start to measure.

421

422

423

(% style="color:#4f81bd" %)**Measurement inside soil:**

424

425

Dig a hole with diameter > 20CM.

426

427

Insert the probe inside, method like measure the surface.

=== 2.6.3 Maintain Probe ===

432

433

1. (((

434

pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

435

)))

436

1. (((

437

After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

438

)))

439

1. (((

440

Probe reference electrode is also no strong, need to avoid strong force or hitting.

441

)))

442

1. (((

443

User should keep reference electrode wet while not use.

444

)))

445

1. (((

446

Avoid the probes to touch oily matter. Which will cause issue in accuracy.

447

)))

448

1. (((

449

The probe is IP68 can be put in water.

)))

== 2.7 Calibration ==

456

457

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

458

459

After stable, user can use below command to calibrate.

460

461

[[image:image-20220607171149-4.png]]

462

463

464

(% style="color:#037691" %)**Calibration Payload**

465

466

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message Type>>path:#H2.3.6MessageType]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

487

488

[[image:image-20220607171416-7.jpeg]]

489

490

491

* Reply to the confirmation package: 14 01

492

* Reply to non-confirmed packet: 14 00

493

494

== 2.8 Frequency Plans ==

495

496

(((

497

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

)))

=== 2.8.1 EU863-870 (EU868) ===

502

503

(% style="color:blue" %)**Uplink:**

504

505

868.1 - SF7BW125 to SF12BW125

506

507

868.3 - SF7BW125 to SF12BW125 and SF7BW250

508

509

868.5 - SF7BW125 to SF12BW125

510

511

867.1 - SF7BW125 to SF12BW125

512

513

867.3 - SF7BW125 to SF12BW125

514

515

867.5 - SF7BW125 to SF12BW125

516

517

867.7 - SF7BW125 to SF12BW125

518

519

867.9 - SF7BW125 to SF12BW125

868.8 - FSK

(% style="color:blue" %)**Downlink:**

525

526

Uplink channels 1-9 (RX1)

527

528

869.525 - SF9BW125 (RX2 downlink only)

=== 2.8.2 US902-928(US915) ===

533

534

(((

535

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

After Join success, the end node will switch to the correct sub band by:

544

)))

545

546

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

547

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

548

549

550

=== 2.8.3 CN470-510 (CN470) ===

551

552

Used in China, Default use CHE=1

553

554

(% style="color:blue" %)**Uplink:**

555

556

486.3 - SF7BW125 to SF12BW125

557

558

486.5 - SF7BW125 to SF12BW125

559

560

486.7 - SF7BW125 to SF12BW125

561

562

486.9 - SF7BW125 to SF12BW125

563

564

487.1 - SF7BW125 to SF12BW125

565

566

487.3 - SF7BW125 to SF12BW125

567

568

487.5 - SF7BW125 to SF12BW125

569

570

487.7 - SF7BW125 to SF12BW125

571

572

573

(% style="color:blue" %)**Downlink:**

574

575

506.7 - SF7BW125 to SF12BW125

576

577

506.9 - SF7BW125 to SF12BW125

578

579

507.1 - SF7BW125 to SF12BW125

580

581

507.3 - SF7BW125 to SF12BW125

582

583

507.5 - SF7BW125 to SF12BW125

584

585

507.7 - SF7BW125 to SF12BW125

586

587

507.9 - SF7BW125 to SF12BW125

588

589

508.1 - SF7BW125 to SF12BW125

590

591

505.3 - SF12BW125 (RX2 downlink only)

=== 2.8.4 AU915-928(AU915) ===

596

597

(((

598

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

)))

(((

After Join success, the end node will switch to the correct sub band by:

611

)))

612

613

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

614

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

615

616

617

=== 2.8.5 AS920-923 & AS923-925 (AS923) ===

618

619

(% style="color:blue" %)**Default Uplink channel:**

620

621

923.2 - SF7BW125 to SF10BW125

622

623

923.4 - SF7BW125 to SF10BW125

624

625

626

(% style="color:blue" %)**Additional Uplink Channel**:

627

628

(OTAA mode, channel added by JoinAccept message)

629

630

631

(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:

632

633

922.2 - SF7BW125 to SF10BW125

634

635

922.4 - SF7BW125 to SF10BW125

636

637

922.6 - SF7BW125 to SF10BW125

638

639

922.8 - SF7BW125 to SF10BW125

640

641

923.0 - SF7BW125 to SF10BW125

642

643

922.0 - SF7BW125 to SF10BW125

644

645

646

(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

647

648

923.6 - SF7BW125 to SF10BW125

649

650

923.8 - SF7BW125 to SF10BW125

651

652

924.0 - SF7BW125 to SF10BW125

653

654

924.2 - SF7BW125 to SF10BW125

655

656

924.4 - SF7BW125 to SF10BW125

657

658

924.6 - SF7BW125 to SF10BW125

659

660

661

(% style="color:blue" %)**Downlink:**

662

663

Uplink channels 1-8 (RX1)

664

665

923.2 - SF10BW125 (RX2)

=== 2.8.6 KR920-923 (KR920) ===

670

671

(% style="color:blue" %)**Default channel:**

672

673

922.1 - SF7BW125 to SF12BW125

674

675

922.3 - SF7BW125 to SF12BW125

676

677

922.5 - SF7BW125 to SF12BW125

678

679

680

(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**

681

682

922.1 - SF7BW125 to SF12BW125

683

684

922.3 - SF7BW125 to SF12BW125

685

686

922.5 - SF7BW125 to SF12BW125

687

688

922.7 - SF7BW125 to SF12BW125

689

690

922.9 - SF7BW125 to SF12BW125

691

692

923.1 - SF7BW125 to SF12BW125

693

694

923.3 - SF7BW125 to SF12BW125

695

696

697

(% style="color:blue" %)**Downlink:**

698

699

Uplink channels 1-7(RX1)

700

701

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

=== 2.8.7 IN865-867 (IN865) ===

706

707

(% style="color:blue" %)**Uplink:**

708

709

865.0625 - SF7BW125 to SF12BW125

710

711

865.4025 - SF7BW125 to SF12BW125

712

713

865.9850 - SF7BW125 to SF12BW125

714

715

716

(% style="color:blue" %)**Downlink:**

717

718

Uplink channels 1-3 (RX1)

719

720

866.550 - SF10BW125 (RX2)

== 2.9 LED Indicator ==

725

726

The LSPH01 has an internal LED which is to show the status of different state.

727

728

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

729

* Blink once when device transmit a packet.

730

731

732

== 2.10 Firmware Change Log ==

733

734

735

**Firmware download link:**

736

737

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

738

739

740

**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>path:/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/]]

= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =

745

746

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

747

748

* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].

749

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]

750

751

There are two kinds of commands to configure LSPH01, they are:

752

753

* (% style="color:#4f81bd" %)** General Commands**.

754

755

These commands are to configure:

756

757

* General system settings like: uplink interval.

758

* LoRaWAN protocol & radio related command.

759

760

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]

761

762

763

* (% style="color:#4f81bd" %)** Commands special design for LSPH01**

764

765

These commands only valid for LSPH01, as below:

== 3.1 Set Transmit Interval Time ==

770

771

Feature: Change LoRaWAN End Node Transmit Interval.

772

773

(% style="color:#037691" %)**AT Command: AT+TDC**

774

775

[[image:image-20220607171554-8.png]]

(% style="color:#037691" %)**Downlink Command: 0x01**

780

781

Format: Command Code (0x01) followed by 3 bytes time value.

782

783

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

784

785

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

786

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

787

788

== 3.2 Set Interrupt Mode ==

789

790

Feature, Set Interrupt mode for GPIO_EXIT.

791

792

(% style="color:#037691" %)**AT Command: AT+INTMOD**

793

794

[[image:image-20220607171716-9.png]]

795

796

797

(% style="color:#037691" %)**Downlink Command: 0x06**

798

799

Format: Command Code (0x06) followed by 3 bytes.

800

801

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

802

803

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

804

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

805

806

807

== 3.3 Calibrate Sensor ==

808

809

Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands

== 3.4 Get Firmware Version Info ==

814

815

Feature: use downlink to get firmware version.

816

817

(% style="color:#037691" %)**Downlink Command: 0x26**

818

819

[[image:image-20220607171917-10.png]]

820

821

* Reply to the confirmation package: 26 01

822

* Reply to non-confirmed packet: 26 00

823

824

Device will send an uplink after got this downlink command. With below payload:

825

826

Configures info payload:

827

828

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)

829

|=(((

830

**Size(bytes)**

831

)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**

832

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

841

[[Message Type>>path:#H2.3.6MessageType]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

872

873

874

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

= 4. Battery & How to replace =

896

897

== 4.1 Battery Type ==

898

899

(((

900

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

)))

(((

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

905

)))

906

907

[[image:1654593587246-335.png]]

908

909

910

Minimum Working Voltage for the LSPH01:

911

912

LSPH01: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

917

918

(((

919

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

)))

(((

And make sure the positive and negative pins match.

)))

== 4.3 Power Consumption Analyze ==

929

930

(((

931

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

)))

(((

Instruction to use as below:

)))

**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

940

941

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

942

943

944

**Step 2**: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

951

952

[[image:1654593605679-189.png]]

953

954

955

The battery related documents as below:

956

957

* (((

958

[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],

959

)))

960

* (((

961

[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],

962

)))

963

* (((

964

[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

965

)))

966

967

[[image:image-20220607172042-11.png]]

=== 4.3.1 Battery Note ===

972

973

(((

974

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

)))

=== 4.3.2 Replace the battery ===

980

981

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

982

983

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

= 5. Use AT Command =

988

989

== 5.1 Access AT Commands ==

990

991

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

992

993

[[image:1654593668970-604.png]]

**Connection:**

(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**

998

999

(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**

1000

1001

(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**

1002

1003

1004

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

1005

1006

1007

[[image:1654593712276-618.png]]

1008

1009

Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].

= 6. FAQ =

== 6.1 How to change the LoRa Frequency Bands/Region ==

1016

1017

You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].

1018

When downloading the images, choose the required image file for download.

= 7. Trouble Shooting =

1023

1024

== 7.1 AT Commands input doesn’t work ==

1025

1026

In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

= 8. Order Info =

Part Number: (% style="color:blue" %)**LSPH01-XX**

1033

1034

1035

(% style="color:blue" %)**XX**(%%): The default frequency band

1036

1037

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1038

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1039

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1040

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1041

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1042

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1043

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1044

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 9. Packing Info =

**Package Includes**:

1051

1052

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1053

1054

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1065

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

1066

1067

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual

Applications

Navigation