LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

28

29

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

30

31

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

32

33

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

34

35

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

36

37

38

[[image:1654580186518-415.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

45

* Ultra-low power consumption

46

* Monitor soil pH with temperature compensation.

47

* Monitor soil temperature

48

* Monitor Battery Level

49

* Support pH calibration by end user

50

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

51

* AT Commands to change parameters

52

* Uplink on periodically

53

* Downlink to change configure

54

* IP66 Waterproof Enclosure

55

* IP68 rate for the Sensor Probe

56

* 8500mAh Battery for long term use

57

58

59

== 1.3 Probe Specification ==

60

61

62

(% style="color:#4f81bd" %)**Soil pH:**

63

64

* Range: 3 ~~ 10 pH

65

* Resolution: 0.01 pH

66

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

67

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

84

85

[[image:1654580482666-473.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

90

91

== 2.1 How it works ==

92

93

(((

94

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

103

104

(((

105

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

)))

[[image:image-20220607135531-1.jpeg]]

126

127

128

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

129

130

131

**Register the device**

132

133

[[image:1654581442672-605.png]]

**Add APP EUI and DEV EUI**

138

139

[[image:1654581465717-368.png]]

**Add APP EUI in the application**

144

145

[[image:1654581493871-516.png]]

**Add APP KEY**

[[image:1654581517630-991.png]]

152

153

154

(% style="color:blue" %)**Step 2**(%%): Power on LSPH01

155

156

157

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

158

159

[[image:image-20220607135918-2.png]]

160

161

162

(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

163

164

[[image:1654581590132-631.png]]

== 2.3 Uplink Payload ==

169

170

LSPH01 will uplink payload via LoRaWAN with below payload format:

171

172

Uplink payload includes in total 11 bytes.

173

174

Normal uplink payload:

175

176

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

182

|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((

183

[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

184

185

[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

186

)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((

187

[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]

188

)))|Reserve|(((

189

[[Message Type>>||anchor="H2.3.6MessageType"]]

190

)))

191

192

[[image:1654581735133-458.png]]

=== 2.3.1 Battery Info ===

197

198

199

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

208

209

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

215

216

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

238

239

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

244

245

This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

251

252

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

257

258

For a normal uplink payload, the message type is always 0x01.

Valid Message Type:

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

264

|**Message Type Code**|**Description**|**Payload**

265

|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]

266

|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]

267

|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]

268

269

270

=== 2.3.7 Decode payload in The Things Network ===

271

272

While using TTN network, you can add the payload format to decode the payload.

273

274

275

[[image:1654582541848-906.png]]

276

277

(((

278

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

288

289

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]

== 2.5 Show Data in DataCake IoT Server ==

294

295

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

296

297

298

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

299

300

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

301

302

303

[[image:1654583683416-869.png]]

304

305

306

[[image:1654583694084-878.png]]

307

308

309

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

310

311

(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**

312

313

[[image:1654583711590-413.png]]

[[image:1654583732798-193.png]]

318

319

320

[[image:1654583749683-259.png]]

321

322

323

(% style="color:blue" %)**Step 5**(%%)**: add payload decode**

324

325

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

326

327

328

[[image:1654583770974-935.png]]

329

330

[[image:1654583781517-146.png]]

331

332

333

[[image:1654583791351-557.png]]

334

335

336

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

337

338

339

[[image:1654583805491-713.png]]

== 2.6 Installation and Maintain ==

344

345

=== 2.6.1 Before measurement ===

346

347

(((

348

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

)))

=== 2.6.2 Measurement ===

354

355

356

(% style="color:#4f81bd" %)**Measurement the soil surface:**

357

358

[[image:1654584128046-287.png]]

359

360

Choose the proper measuring position. Split the surface soil according to the measured deep.

361

362

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

363

364

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

365

366

Put soil over the probe after insert. And start to measure.

367

368

369

(% style="color:#4f81bd" %)**Measurement inside soil:**

370

371

Dig a hole with diameter > 20CM.

372

373

Insert the probe inside, method like measure the surface.

=== 2.6.3 Maintain Probe ===

378

379

1. (((

380

pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

381

)))

382

1. (((

383

After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

384

)))

385

1. (((

386

Probe reference electrode is also no strong, need to avoid strong force or hitting.

387

)))

388

1. (((

389

User should keep reference electrode wet while not use.

390

)))

391

1. (((

392

Avoid the probes to touch oily matter. Which will cause issue in accuracy.

393

)))

394

1. (((

395

The probe is IP68 can be put in water.

)))

== 2.7 Calibration ==

402

403

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

404

405

After stable, user can use below command to calibrate.

406

407

[[image:image-20220607144936-3.png]]

408

409

410

(% style="color:#037691" %)**Calibration Payload**

411

412

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message Type>>||anchor="H2.3.6MessageType"]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

433

434

[[image:image-20220607145603-4.png]]

435

436

* Reply to the confirmation package: 14 01

437

* Reply to non-confirmed packet: 14 00

438

439

440

== 2.8 Frequency Plans ==

441

442

(((

443

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

)))

=== 2.8.1 EU863-870 (EU868) ===

448

449

(% style="color:blue" %)**Uplink:**

450

451

868.1 - SF7BW125 to SF12BW125

452

453

868.3 - SF7BW125 to SF12BW125 and SF7BW250

454

455

868.5 - SF7BW125 to SF12BW125

456

457

867.1 - SF7BW125 to SF12BW125

458

459

867.3 - SF7BW125 to SF12BW125

460

461

867.5 - SF7BW125 to SF12BW125

462

463

867.7 - SF7BW125 to SF12BW125

464

465

867.9 - SF7BW125 to SF12BW125

868.8 - FSK

(% style="color:blue" %)**Downlink:**

471

472

Uplink channels 1-9 (RX1)

473

474

869.525 - SF9BW125 (RX2 downlink only)

=== 2.8.2 US902-928(US915) ===

479

480

(((

481

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

After Join success, the end node will switch to the correct sub band by:

490

)))

491

492

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

493

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

494

495

496

=== 2.8.3 CN470-510 (CN470) ===

497

498

Used in China, Default use CHE=1

499

500

(% style="color:blue" %)**Uplink:**

501

502

486.3 - SF7BW125 to SF12BW125

503

504

486.5 - SF7BW125 to SF12BW125

505

506

486.7 - SF7BW125 to SF12BW125

507

508

486.9 - SF7BW125 to SF12BW125

509

510

487.1 - SF7BW125 to SF12BW125

511

512

487.3 - SF7BW125 to SF12BW125

513

514

487.5 - SF7BW125 to SF12BW125

515

516

487.7 - SF7BW125 to SF12BW125

517

518

519

(% style="color:blue" %)**Downlink:**

520

521

506.7 - SF7BW125 to SF12BW125

522

523

506.9 - SF7BW125 to SF12BW125

524

525

507.1 - SF7BW125 to SF12BW125

526

527

507.3 - SF7BW125 to SF12BW125

528

529

507.5 - SF7BW125 to SF12BW125

530

531

507.7 - SF7BW125 to SF12BW125

532

533

507.9 - SF7BW125 to SF12BW125

534

535

508.1 - SF7BW125 to SF12BW125

536

537

505.3 - SF12BW125 (RX2 downlink only)

=== 2.8.4 AU915-928(AU915) ===

542

543

(((

544

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

)))

(((

After Join success, the end node will switch to the correct sub band by:

557

)))

558

559

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

560

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

561

562

563

=== 2.8.5 AS920-923 & AS923-925 (AS923) ===

564

565

(% style="color:blue" %)**Default Uplink channel:**

566

567

923.2 - SF7BW125 to SF10BW125

568

569

923.4 - SF7BW125 to SF10BW125

570

571

572

(% style="color:blue" %)**Additional Uplink Channel**:

573

574

(OTAA mode, channel added by JoinAccept message)

575

576

577

(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:

578

579

922.2 - SF7BW125 to SF10BW125

580

581

922.4 - SF7BW125 to SF10BW125

582

583

922.6 - SF7BW125 to SF10BW125

584

585

922.8 - SF7BW125 to SF10BW125

586

587

923.0 - SF7BW125 to SF10BW125

588

589

922.0 - SF7BW125 to SF10BW125

590

591

592

(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

593

594

923.6 - SF7BW125 to SF10BW125

595

596

923.8 - SF7BW125 to SF10BW125

597

598

924.0 - SF7BW125 to SF10BW125

599

600

924.2 - SF7BW125 to SF10BW125

601

602

924.4 - SF7BW125 to SF10BW125

603

604

924.6 - SF7BW125 to SF10BW125

605

606

607

(% style="color:blue" %)**Downlink:**

608

609

Uplink channels 1-8 (RX1)

610

611

923.2 - SF10BW125 (RX2)

=== 2.8.6 KR920-923 (KR920) ===

616

617

(% style="color:blue" %)**Default channel:**

618

619

922.1 - SF7BW125 to SF12BW125

620

621

922.3 - SF7BW125 to SF12BW125

622

623

922.5 - SF7BW125 to SF12BW125

624

625

626

(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**

627

628

922.1 - SF7BW125 to SF12BW125

629

630

922.3 - SF7BW125 to SF12BW125

631

632

922.5 - SF7BW125 to SF12BW125

633

634

922.7 - SF7BW125 to SF12BW125

635

636

922.9 - SF7BW125 to SF12BW125

637

638

923.1 - SF7BW125 to SF12BW125

639

640

923.3 - SF7BW125 to SF12BW125

641

642

643

(% style="color:blue" %)**Downlink:**

644

645

Uplink channels 1-7(RX1)

646

647

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

648

649

650

=== 2.8.7 IN865-867 (IN865) ===

651

652

(% style="color:blue" %)**Uplink:**

653

654

865.0625 - SF7BW125 to SF12BW125

655

656

865.4025 - SF7BW125 to SF12BW125

657

658

865.9850 - SF7BW125 to SF12BW125

659

660

661

(% style="color:blue" %)**Downlink:**

662

663

Uplink channels 1-3 (RX1)

664

665

866.550 - SF10BW125 (RX2)

== 2.9 LED Indicator ==

670

671

The LSPH01 has an internal LED which is to show the status of different state.

672

673

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

674

* Blink once when device transmit a packet.

675

676

677

== 2.10 Firmware Change Log ==

678

679

680

**Firmware download link:**

681

682

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

683

684

685

**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]

= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =

690

691

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

692

693

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

694

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

695

696

There are two kinds of commands to configure LSPH01, they are:

697

698

* (% style="color:#4f81bd" %)** General Commands**.

699

700

These commands are to configure:

701

702

* General system settings like: uplink interval.

703

* LoRaWAN protocol & radio related command.

704

705

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

706

707

708

* (% style="color:#4f81bd" %)** Commands special design for LSPH01**

709

710

These commands only valid for LSPH01, as below:

== 3.1 Set Transmit Interval Time ==

715

716

Feature: Change LoRaWAN End Node Transmit Interval.

717

718

(% style="color:#037691" %)**AT Command: AT+TDC**

719

720

721

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)

722

|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**

723

|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((

30000

OK

the interval is 30000ms = 30s

729

)))

730

|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((

731

OK

732

733

Set transmit interval to 60000ms = 60 seconds

734

)))

735

736

(% style="color:#037691" %)**Downlink Command: 0x01**

737

738

Format: Command Code (0x01) followed by 3 bytes time value.

739

740

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

741

742

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

743

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Interrupt Mode ==

748

749

Feature, Set Interrupt mode for GPIO_EXIT.

750

751

(% style="color:#037691" %)**AT Command: AT+INTMOD**

752

753

[[image:image-20220607153759-6.png]]

754

755

756

(% style="color:#037691" %)**Downlink Command: 0x06**

757

758

Format: Command Code (0x06) followed by 3 bytes.

759

760

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

761

762

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

763

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

== 3.3 Calibrate Sensor ==

768

769

Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands

== 3.4 Get Firmware Version Info ==

774

775

Feature: use downlink to get firmware version.

776

777

(% style="color:#037691" %)**Downlink Command: 0x26**

778

779

[[image:image-20220607154718-7.png]]

780

781

* Reply to the confirmation package: 26 01

782

* Reply to non-confirmed packet: 26 00

783

784

Device will send an uplink after got this downlink command. With below payload:

785

786

Configures info payload:

787

788

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)

789

|=(((

790

**Size(bytes)**

791

)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**

792

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

801

[[Message Type>>||anchor="H2.3.6MessageType"]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

832

833

834

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

= 4. Battery & How to replace =

856

857

== 4.1 Battery Type ==

858

859

(((

860

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

)))

(((

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

865

)))

866

867

[[image:1654588469844-778.png]]

868

869

870

Minimum Working Voltage for the LSPH01:

871

872

LSPH01: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

877

878

(((

879

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

)))

(((

And make sure the positive and negative pins match.

)))

== 4.3 Power Consumption Analyze ==

889

890

(((

891

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

)))

(((

Instruction to use as below:

)))

**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

900

901

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

902

903

904

**Step 2**: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

911

912

[[image:1654588577573-122.png]]

913

914

915

The battery related documents as below:

916

917

* (((

918

[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],

919

)))

920

* (((

921

[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],

922

)))

923

* (((

924

[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

925

)))

926

927

[[image:image-20220607155856-8.png]]

=== 4.3.1 Battery Note ===

932

933

(((

934

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

)))

=== 4.3.2 Replace the battery ===

940

941

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

942

943

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

= 5. Use AT Command =

948

949

== 5.1 Access AT Commands ==

950

951

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

952

953

[[image:1654589001411-343.png]]

**Connection:**

(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**

958

959

(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**

960

961

(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**

962

963

964

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

965

966

967

[[image:1654589062541-567.png]]

968

969

Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].

= 6. FAQ =

== 6.1 How to change the LoRa Frequency Bands/Region ==

976

977

You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].

978

When downloading the images, choose the required image file for download.

= 7. Trouble Shooting =

983

984

== 7.1 AT Commands input doesn’t work ==

985

986

In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

= 8. Order Info =

Part Number: (% style="color:blue" %)**LSPH01-XX**

993

994

995

(% style="color:blue" %)**XX**(%%): The default frequency band

996

997

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

998

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

999

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1000

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1001

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1002

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1003

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1004

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 9. Packing Info =

**Package Includes**:

1010

1011

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1012

1013

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1023

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

1024

1025

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual