LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

28

29

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

30

31

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

32

33

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

34

35

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

36

37

38

[[image:1654580186518-415.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

45

* Ultra-low power consumption

46

* Monitor soil pH with temperature compensation.

47

* Monitor soil temperature

48

* Monitor Battery Level

49

* Support pH calibration by end user

50

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

51

* AT Commands to change parameters

52

* Uplink on periodically

53

* Downlink to change configure

54

* IP66 Waterproof Enclosure

55

* IP68 rate for the Sensor Probe

56

* 8500mAh Battery for long term use

57

58

59

== 1.3 Probe Specification ==

60

61

62

(% style="color:#4f81bd" %)**Soil pH:**

63

64

* Range: 3 ~~ 10 pH

65

* Resolution: 0.01 pH

66

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

67

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

86

87

[[image:1654580482666-473.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

92

93

== 2.1 How it works ==

94

95

(((

96

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.200BUseATCommand"]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

105

106

(((

107

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

)))

[[image:image-20220607135531-1.jpeg]]

128

129

130

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

131

132

133

**Register the device**

134

135

[[image:1654581442672-605.png]]

**Add APP EUI and DEV EUI**

140

141

[[image:1654581465717-368.png]]

**Add APP EUI in the application**

146

147

[[image:1654581493871-516.png]]

**Add APP KEY**

[[image:1654581517630-991.png]]

154

155

156

(% style="color:blue" %)**Step 2**(%%): Power on LSPH01

157

158

159

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

160

161

[[image:image-20220607135918-2.png]]

162

163

164

(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

165

166

[[image:1654581590132-631.png]]

== 2.3 Uplink Payload ==

171

172

LSPH01 will uplink payload via LoRaWAN with below payload format:

173

174

Uplink payload includes in total 11 bytes.

175

176

Normal uplink payload:

177

178

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

184

|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((

185

[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

186

187

[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

188

)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((

189

[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]

190

)))|Reserve|(((

191

[[Message Type>>||anchor="H2.3.6MessageType"]]

192

)))

193

194

[[image:1654581735133-458.png]]

=== 2.3.1 Battery Info ===

199

200

201

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

210

211

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

217

218

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

240

241

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

246

247

This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

253

254

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

259

260

For a normal uplink payload, the message type is always 0x01.

Valid Message Type:

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

266

|**Message Type Code**|**Description**|**Payload**

267

|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3Uplink Payload"]]

268

|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]

269

|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]

270

271

272

=== 2.3.7 Decode payload in The Things Network ===

273

274

While using TTN network, you can add the payload format to decode the payload.

275

276

277

[[image:1654582541848-906.png]]

278

279

(((

280

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

290

291

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]

== 2.5 Show Data in DataCake IoT Server ==

296

297

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

298

299

300

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

301

302

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

303

304

305

[[image:1654583683416-869.png]]

306

307

308

[[image:1654583694084-878.png]]

309

310

311

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

312

313

(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**

314

315

[[image:1654583711590-413.png]]

[[image:1654583732798-193.png]]

320

321

322

[[image:1654583749683-259.png]]

323

324

325

(% style="color:blue" %)**Step 5**(%%)**: add payload decode**

326

327

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

328

329

330

[[image:1654583770974-935.png]]

331

332

[[image:1654583781517-146.png]]

333

334

335

[[image:1654583791351-557.png]]

336

337

338

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

339

340

341

[[image:1654583805491-713.png]]

1.

11. Installation and Maintain

349

111. Before measurement

350

351

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

1.

11.

111. Measurement

**Measurement the soil surface**

359

360

361

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png]] Choose the proper measuring position. Split the surface soil according to the measured deep.

362

363

364

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

365

366

367

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

368

369

370

Put soil over the probe after insert. And start to measure.

371

372

373

**Measurement inside soil**

Dig a hole with diameter > 20CM.

378

379

380

Insert the probe inside, method like measure the surface.

1.

11.

111. Maintain Probe

1111. pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

387

1111. After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

388

1111. Probe reference electrode is also no strong, need to avoid strong force or hitting.

389

1111. User should keep reference electrode wet while not use.

390

1111. Avoid the probes to touch oily matter. Which will cause issue in accuracy.

391

1111. The probe is IP68 can be put in water.

1.

11. Calibration

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

397

398

399

**After stable, user can use below command to calibrate.**

400

401

402

|**pH buffer solution**|**AT Command to calibrate**|**Downlink Command**|**Read Cal Value**

403

|**4.00**|**AT+PHCAL=4**|(((

404

**0x13 04**

405

406

**Reply with Calibrate payload**

)))|(((

**AT+PHCAL=?**

**Example 41,61,91**

)))

|**6.86**|**AT+PHCAL=6**|(((

413

**0x13 06**

414

415

**Reply with Calibrate payload**

416

)))|**AT+PHCAL=?**

417

|**9.18**|**AT+PHCAL=9**|(((

418

**0x13 09**

419

420

**Reply with Calibrate payload**

421

)))|**AT+PHCAL=?**

422

|**Factory Default**|**AT+PHCAL=15**|(((

423

**0x13 15**

424

425

**Reply with Calibrate payload**

)))|(((

**AT+PHCAL=?**

**Example 151**

)))

Calibration Payload

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message>>path:#Message_Type]]

449

450

[[Type>>path:#Message_Type]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

456

457

458

|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**

459

|Get Calibration Version Info|Any|14|2

460

461

* Reply to the confirmation package: 14 01

462

* Reply to non-confirmed packet: 14 00

1.

11. Frequency Plans

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

1.

11.

111. EU863-870 (EU868)

Uplink:

868.1 - SF7BW125 to SF12BW125

476

477

868.3 - SF7BW125 to SF12BW125 and SF7BW250

478

479

868.5 - SF7BW125 to SF12BW125

480

481

867.1 - SF7BW125 to SF12BW125

482

483

867.3 - SF7BW125 to SF12BW125

484

485

867.5 - SF7BW125 to SF12BW125

486

487

867.7 - SF7BW125 to SF12BW125

488

489

867.9 - SF7BW125 to SF12BW125

868.8 - FSK

Downlink:

Uplink channels 1-9 (RX1)

497

498

869.525 - SF9BW125 (RX2 downlink only)

1.

11.

111. US902-928(US915)

504

505

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

506

507

508

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

509

510

511

After Join success, the end node will switch to the correct sub band by:

512

513

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

514

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

1.

11.

111. CN470-510 (CN470)

519

520

Used in China, Default use CHE=1

Uplink:

486.3 - SF7BW125 to SF12BW125

525

526

486.5 - SF7BW125 to SF12BW125

527

528

486.7 - SF7BW125 to SF12BW125

529

530

486.9 - SF7BW125 to SF12BW125

531

532

487.1 - SF7BW125 to SF12BW125

533

534

487.3 - SF7BW125 to SF12BW125

535

536

487.5 - SF7BW125 to SF12BW125

537

538

487.7 - SF7BW125 to SF12BW125

Downlink:

506.7 - SF7BW125 to SF12BW125

544

545

506.9 - SF7BW125 to SF12BW125

546

547

507.1 - SF7BW125 to SF12BW125

548

549

507.3 - SF7BW125 to SF12BW125

550

551

507.5 - SF7BW125 to SF12BW125

552

553

507.7 - SF7BW125 to SF12BW125

554

555

507.9 - SF7BW125 to SF12BW125

556

557

508.1 - SF7BW125 to SF12BW125

558

559

505.3 - SF12BW125 (RX2 downlink only)

1.

11.

111. AU915-928(AU915)

565

566

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

567

568

569

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

570

571

572

After Join success, the end node will switch to the correct sub band by:

573

574

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

575

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

1.

11.

111. AS920-923 & AS923-925 (AS923)

580

581

**Default Uplink channel:**

582

583

923.2 - SF7BW125 to SF10BW125

584

585

923.4 - SF7BW125 to SF10BW125

586

587

588

**Additional Uplink Channel**:

589

590

(OTAA mode, channel added by JoinAccept message)

591

592

**AS920~~AS923 for Japan, Malaysia, Singapore**:

593

594

922.2 - SF7BW125 to SF10BW125

595

596

922.4 - SF7BW125 to SF10BW125

597

598

922.6 - SF7BW125 to SF10BW125

599

600

922.8 - SF7BW125 to SF10BW125

601

602

923.0 - SF7BW125 to SF10BW125

603

604

922.0 - SF7BW125 to SF10BW125

605

606

607

**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

608

609

923.6 - SF7BW125 to SF10BW125

610

611

923.8 - SF7BW125 to SF10BW125

612

613

924.0 - SF7BW125 to SF10BW125

614

615

924.2 - SF7BW125 to SF10BW125

616

617

924.4 - SF7BW125 to SF10BW125

618

619

924.6 - SF7BW125 to SF10BW125

**Downlink:**

Uplink channels 1-8 (RX1)

626

627

923.2 - SF10BW125 (RX2)

1.

11.

111. KR920-923 (KR920)

Default channel:

922.1 - SF7BW125 to SF12BW125

637

638

922.3 - SF7BW125 to SF12BW125

639

640

922.5 - SF7BW125 to SF12BW125

641

642

643

Uplink: (OTAA mode, channel added by JoinAccept message)

644

645

922.1 - SF7BW125 to SF12BW125

646

647

922.3 - SF7BW125 to SF12BW125

648

649

922.5 - SF7BW125 to SF12BW125

650

651

922.7 - SF7BW125 to SF12BW125

652

653

922.9 - SF7BW125 to SF12BW125

654

655

923.1 - SF7BW125 to SF12BW125

656

657

923.3 - SF7BW125 to SF12BW125

Downlink:

Uplink channels 1-7(RX1)

663

664

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

1.

11.

111. IN865-867 (IN865)

Uplink:

865.0625 - SF7BW125 to SF12BW125

674

675

865.4025 - SF7BW125 to SF12BW125

676

677

865.9850 - SF7BW125 to SF12BW125

Downlink:

Uplink channels 1-3 (RX1)

683

684

866.550 - SF10BW125 (RX2)

1.

11. LED Indicator

The LSPH01 has an internal LED which is to show the status of different state.

691

692

693

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

694

* Blink once when device transmit a packet.

695

696

1.

697

11. Firmware Change Log

698

699

**Firmware download link:**

700

701

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

702

703

704

**Firmware Upgrade Method:**

705

706

[[http:~~/~~/wiki.dragino.com/index.pHp?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction>>url:http://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction_for_STM32_base_products#Introduction]]

1. Configure LSPH01 via AT Command or LoRaWAN Downlink

714

715

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

716

717

* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

718

* LoRaWAN Downlink instruction for different platforms:

719

720

[[http:~~/~~/wiki.dragino.com/index.pHp?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

721

722

723

There are two kinds of commands to configure LSPH01, they are:

724

725

* **General Commands**.

726

727

These commands are to configure:

728

729

* General system settings like: uplink interval.

730

* LoRaWAN protocol & radio related command.

731

732

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

733

734

[[http:~~/~~/wiki.dragino.com/index.pHp?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

735

736

737

* **Commands special design for LSPH01**

738

739

These commands only valid for LSPH01, as below:

1.

11. Set Transmit Interval Time

744

745

Feature: Change LoRaWAN End Node Transmit Interval.

746

747

**AT Command: AT+TDC**

748

749

|**Command Example**|**Function**|**Response**

750

|AT+TDC=?|Show current transmit Interval|(((

30000

OK

the interval is 30000ms = 30s

756

)))

757

|AT+TDC=60000|Set Transmit Interval|(((

758

OK

759

760

Set transmit interval to 60000ms = 60 seconds

761

)))

762

763

**Downlink Command: 0x01**

764

765

Format: Command Code (0x01) followed by 3 bytes time value.

766

767

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

768

769

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

770

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

771

772

1.

773

11. Set Interrupt Mode

774

775

Feature, Set Interrupt mode for GPIO_EXIT.

776

777

**AT Command: AT+INTMOD**

778

779

|**Command Example**|**Function**|**Response**

780

|AT+INTMOD=?|Show current interrupt mode|(((

0

OK

the mode is 0 = No interruption

786

)))

787

|AT+INTMOD=2|(((

788

Set Transmit Interval

789

790

1. (Disable Interrupt),

791

1. (Trigger by rising and falling edge),

792

1. (Trigger by falling edge)

793

1. (Trigger by rising edge)

794

)))|OK

795

796

**Downlink Command: 0x06**

797

798

Format: Command Code (0x06) followed by 3 bytes.

799

800

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

801

802

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

803

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

1.

11. Calibrate Sensor

Detail See [[Calibration Guide>>path:#Calibration]] for the user of 0x13 and 0x14 downlink commands

1.

11. Get Firmware Version Info

814

815

Feature: use downlink to get firmware version.

816

817

818

**Downlink Command: 0x26**

819

820

821

|**Downlink Control Type**|**FPort**|**Type Code**|**Downlink payload size(bytes)**

822

|Get Firmware Version Info|Any|26|2

823

824

* Reply to the confirmation package: 26 01

825

* Reply to non-confirmed packet: 26 00

826

827

Device will send an uplink after got this downlink command. With below payload:

828

829

Configures info payload:

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**1**|**1**|**5**|**1**

836

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

845

[[Message>>path:#Message_Type]]

846

847

[[Type>>path:#Message_Type]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

879

880

881

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

1. Battery & How to replace

906

11. Battery Type

907

908

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

909

910

911

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

912

913

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png]]

914

915

916

Minimum Working Voltage for the LSPH01:

917

918

LSPH01: 2.45v ~~ 3.6v

1.

11. Replace Battery

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

925

926

And make sure the positive and negative pins match.

1.

11. Power Consumption Analyze

932

933

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

934

935

936

Instruction to use as below:

937

938

939

Step 1: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

940

941

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

942

943

944

Step 2: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

951

952

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png]]

953

954

955

The battery related documents as below:

956

957

* [[Battery Dimension>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]],

958

* [[Lithium-Thionyl Chloride Battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]] datasheet

959

* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

|(((

JST-XH-2P connector

)))

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png]]

1.

11.

111. Battery Note

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

1.

11.

111. Replace the battery

979

980

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

981

982

983

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

1. Use AT Command

11. Access AT Commands

992

993

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

994

995

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]

Connection:

USB TTL GND <~-~-~-~-> GND

1000

1001

USB TTL TXD <~-~-~-~-> UART_RXD

1002

1003

USB TTL RXD <~-~-~-~-> UART_TXD

1004

1005

1006

In the PC, you need to set the serial baud rate to **9600** to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

1007

1008

1009

[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]

1010

1011

Valid AT Command please check [[Configure Device>>path:#Configure_Device]].

1. FAQ

11. How to change the LoRa Frequency Bands/Region

1018

1019

You can follow the instructions for [[how to upgrade image>>path:#3ygebqi]].

1020

When downloading the images, choose the required image file for download.

1. Trouble Shooting

11. AT Commands input doesn’t work

1026

1027

In the case if user can see the console output but can’t type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn’t send **ENTER** while press the send key, user need to add ENTER in their string.

1. Order Info

Part Number: **LSPH01-XX**

1033

1034

1035

**XX**: The default frequency band

1036

1037

* **AS923**: LoRaWAN AS923 band

1038

* **AU915**: LoRaWAN AU915 band

1039

* **EU433**: LoRaWAN EU433 band

1040

* **EU868**: LoRaWAN EU868 band

1041

* **KR920**: LoRaWAN KR920 band

1042

* **US915**: LoRaWAN US915 band

1043

* **IN865**: LoRaWAN IN865 band

1044

* **CN470**: LoRaWAN CN470 band

1. Packing Info

**Package Includes**:

1049

1050

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1051

1052

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1062

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to

1063

1064

[[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]

1065

1066

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual

Applications

Navigation