Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -49,9 +49,6 @@
49	49	* Downlink to change configure
50	50	* 8500mAh Battery for long term use
51	51
52		-
53		-
54		-
55	55	== 1.3  Probe Specification ==
56	56
57	57	* Storage temperature ：-20℃~~75℃
...	...	@@ -67,9 +67,6 @@
67	67	* Material of enclosure - ABS+PC
68	68	* Wire length - 25cm
69	69
70		-
71		-
72		-
73	73	== 1.4  Probe Dimension ==
74	74
75	75
...	...	@@ -87,8 +87,6 @@
87	87	* Automatic control
88	88	* Sewer
89	89
90		-
91		-
92	92	== 1.6 Pin mapping and power on ==
93	93
94	94
...	...	@@ -96,16 +96,16 @@
96	96
97	97
98	98
99		-= 2. Configure LSPH01 to connect to LoRaWAN network =
	91	+= 2. Configure LLDS12 to connect to LoRaWAN network =
100	100
101	101	== 2.1 How it works ==
102	102
103	103	(((
104		-The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
	96	+The LLDS12 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LLDS12. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
105	105	)))
106	106
107	107	(((
108		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
	100	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H6.UseATCommand"]]to set the keys in the LLDS12.
109	109	)))
110	110
111	111
...	...	@@ -116,7 +116,7 @@
116	116	)))
117	117
118	118	(((
119		-[[image:1654592492399-921.png]]
	111	+[[image:1654827857527-556.png]]
120	120	)))
121	121
122	122	(((
...	...	@@ -1125,12 +1125,12 @@
1125	1125
1126	1126
1127	1127
1128		-= 4. Battery & How to replace =
	1120	+= 5.  Battery & How to replace =
1129	1129
1130		-== 4.1 Battery Type ==
	1122	+== 5.1  Battery Type ==
1131	1131
1132	1132	(((
1133		-LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
	1125	+LLDS12 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
1134	1134	)))
1135	1135
1136	1136	(((
...	...	@@ -1140,13 +1140,13 @@
1140	1140	[[image:1654593587246-335.png]]
1141	1141
1142	1142
1143		-Minimum Working Voltage for the LSPH01:
	1135	+Minimum Working Voltage for the LLDS12:
1144	1144
1145		-LSPH01:  2.45v ~~ 3.6v
	1137	+LLDS12:  2.45v ~~ 3.6v
1146	1146
1147	1147
1148	1148
1149		-== 4.2 Replace Battery ==
	1141	+== 5.2  Replace Battery ==
1150	1150
1151	1151	(((
1152	1152	Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
...	...	@@ -1158,7 +1158,7 @@
1158	1158
1159	1159
1160	1160
1161		-== 4.3 Power Consumption Analyze ==
	1153	+== 5.3  Power Consumption Analyze ==
1162	1162
1163	1163	(((
1164	1164	Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
...	...	@@ -1201,7 +1201,7 @@
1201	1201
1202	1202
1203	1203
1204		-=== 4.3.1 ​Battery Note ===
	1196	+=== 5.3.1  ​Battery Note ===
1205	1205
1206	1206	(((
1207	1207	The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
...	...	@@ -1209,23 +1209,23 @@
1209	1209
1210	1210
1211	1211
1212		-=== ​4.3.2 Replace the battery ===
	1204	+=== ​5.3.2  Replace the battery ===
1213	1213
1214	1214	(((
1215		-You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1207	+You can change the battery in the LLDS12.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1216	1216	)))
1217	1217
1218	1218	(((
1219		-The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1211	+The default battery pack of LLDS12 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1220	1220	)))
1221	1221
1222	1222
1223	1223
1224		-= 5. Use AT Command =
	1216	+= 6.  Use AT Command =
1225	1225
1226		-== 5.1 Access AT Commands ==
	1218	+== 6.1  Access AT Commands ==
1227	1227
1228		-LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
	1220	+LLDS12 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LLDS12 for using AT command, as below.
1229	1229
1230	1230	[[image:1654593668970-604.png]]
1231	1231
...	...	@@ -1248,27 +1248,53 @@
1248	1248	Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1249	1249
1250	1250
1251		-= 6. FAQ =
	1243	+= 7.  FAQ =
1252	1252
1253		-== 6.1 How to change the LoRa Frequency Bands/Region ==
	1245	+== 7.1  How to change the LoRa Frequency Bands/Region ==
1254	1254
1255	1255	You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1256	1256	When downloading the images, choose the required image file for download. ​
1257	1257
1258	1258
1259		-= 7. Trouble Shooting =
	1251	+= 8.  Trouble Shooting =
1260	1260
1261		-== 7.1 AT Commands input doesn’t work ==
	1253	+== 8.1  AT Commands input doesn’t work ==
1262	1262
	1255	+
1263	1263	In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1264	1264
1265	1265
	1259	+== 8.2  Significant error between the output distant value of LiDAR and actual distance ==
1266	1266
1267		-= 8. Order Info =
1268	1268
1269		-Part Number: (% style="color:blue" %)**LSPH01-XX**
	1262	+(((
	1263	+(% style="color:blue" %)**Cause ①**(%%)**：**Due to the physical principles of The LiDAR probe, the above phenomenon is likely to occur if the detection object is the material with high reflectivity (such as mirror, smooth floor tile, etc.) or transparent substance (such as glass and water, etc.)
	1264	+)))
1270	1270
	1266	+(((
	1267	+Troubleshooting: Please avoid use of this product under such circumstance in practice.
	1268	+)))
1271	1271
	1270	+(((
	1271	+
	1272	+)))
	1273	+
	1274	+(((
	1275	+(% style="color:blue" %)**Cause ②**(%%)**: **The IR-pass filters are blocked.
	1276	+)))
	1277	+
	1278	+(((
	1279	+Troubleshooting: please use dry dust-free cloth to gently remove the foreign matter.
	1280	+)))
	1281	+
	1282	+
	1283	+
	1284	+= 9.  Order Info =
	1285	+
	1286	+
	1287	+Part Number: (% style="color:blue" %)**LLDS12-XX**
	1288	+
	1289	+
1272	1272	(% style="color:blue" %)**XX**(%%): The default frequency band
1273	1273
1274	1274	* (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
...	...	@@ -1280,12 +1280,13 @@
1280	1280	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1281	1281	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1282	1282
1283		-= 9. ​Packing Info =
1284	1284
	1302	+= 10. ​ Packing Info =
1285	1285
	1304	+
1286	1286	**Package Includes**:
1287	1287
1288		-* LSPH01 LoRaWAN Soil Ph Sensor x 1
	1307	+* LLDS12 LoRaWAN LiDAR Distance Sensor x 1
1289	1289
1290	1290	**Dimension and weight**:
1291	1291
...	...	@@ -1294,8 +1294,9 @@
1294	1294	* Package Size / pcs : cm
1295	1295	* Weight / pcs : g
1296	1296
1297		-= 10. ​Support =
1298	1298
	1317	+= 11.  ​Support =
	1318	+
1299	1299	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1300	1300	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1301	1301