Last modified by Xiaoling on 2025/04/27 16:45
<
From version < 73.6 >
edited by Xiaoling
on 2022/06/07 17:29
To version < 85.3 >
edited by Xiaoling
on 2022/06/08 11:24
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -72,15 +72,25 @@
72 72  
73 73  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
74 74  
75 +(((
75 75  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
77 +)))
76 76  
79 +(((
77 77  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
81 +)))
78 78  
83 +(((
79 79  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
85 +)))
80 80  
87 +(((
81 81  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
89 +)))
82 82  
91 +(((
83 83  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
93 +)))
84 84  
85 85  
86 86  [[image:1654592435432-887.png]]
... ... @@ -104,7 +104,6 @@
104 104  * 8500mAh Battery for long term use
105 105  
106 106  
107 -
108 108  == 1.3 Probe Specification ==
109 109  
110 110  
... ... @@ -126,13 +126,11 @@
126 126  * Length: 3.5 meters
127 127  
128 128  
129 -
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 134  
135 -
136 136  == 1.5 Pin mapping and power on ==
137 137  
138 138  [[image:1654592472094-134.png]]
... ... @@ -148,7 +148,7 @@
148 148  )))
149 149  
150 150  (((
151 -In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
158 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152 152  )))
153 153  
154 154  
... ... @@ -211,7 +211,9 @@
211 211  [[image:image-20220607170442-2.png]]
212 212  
213 213  
221 +(((
214 214  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
223 +)))
215 215  
216 216  [[image:1654592697690-910.png]]
217 217  
... ... @@ -219,11 +219,17 @@
219 219  
220 220  == 2.3 ​Uplink Payload ==
221 221  
231 +(((
222 222  LSPH01 will uplink payload via LoRaWAN with below payload format: 
233 +)))
223 223  
235 +(((
224 224  Uplink payload includes in total 11 bytes.
237 +)))
225 225  
239 +(((
226 226  Normal uplink payload:
241 +)))
227 227  
228 228  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229 229  |(((
... ... @@ -231,14 +231,14 @@
231 231  
232 232  **(bytes)**
233 233  )))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234 -|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235 -[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
249 +|**Value**|[[BAT>>||anchor="2.3.1BatteryInfo"]]|(((
250 +[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
236 236  
237 -[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238 -)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239 -[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
252 +[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
253 +)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
254 +[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240 240  )))|Reserve|(((
241 -[[Message Type>>path:#H2.3.6MessageType]]
256 +[[Message Type>>||anchor="H2.3.6MessageType"]]
242 242  )))
243 243  
244 244  [[image:1654592721645-318.png]]
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === 2.3.5 Interrupt Pin ===
296 296  
297 -This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
312 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298 298  
299 299  
300 300  **Example:**
... ... @@ -307,20 +307,21 @@
307 307  
308 308  === 2.3.6 Message Type ===
309 309  
325 +(((
310 310  For a normal uplink payload, the message type is always 0x01.
327 +)))
311 311  
329 +(((
312 312  Valid Message Type:
331 +)))
313 313  
314 314  
315 315  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316 -|**Message Type Code**|**Description**|**Payload**
317 -|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318 -|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319 -|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
335 +|=**Message Type Code**|=**Description**|=**Payload**
336 +|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
337 +|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
338 +|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
320 320  
321 -
322 -
323 -
324 324  === 2.3.7 Decode payload in The Things Network ===
325 325  
326 326  While using TTN network, you can add the payload format to decode the payload.
... ... @@ -346,12 +346,21 @@
346 346  
347 347  == 2.5 ​Show Data in DataCake IoT Server ==
348 348  
365 +(((
349 349  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
367 +)))
350 350  
369 +(((
370 +
371 +)))
351 351  
373 +(((
352 352  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
375 +)))
353 353  
377 +(((
354 354  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
379 +)))
355 355  
356 356  
357 357  [[image:1654592790040-760.png]]
... ... @@ -374,9 +374,13 @@
374 374  [[image:1654592856403-259.png]]
375 375  
376 376  
402 +(((
377 377  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
404 +)))
378 378  
406 +(((
379 379  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
408 +)))
380 380  
381 381  
382 382  [[image:1654592878525-845.png]]
... ... @@ -399,8 +399,10 @@
399 399  === 2.6.1 Before measurement ===
400 400  
401 401  (((
431 +(((
402 402  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
403 403  )))
434 +)))
404 404  
405 405  
406 406  
... ... @@ -407,24 +407,45 @@
407 407  === 2.6.2 Measurement ===
408 408  
409 409  
441 +(((
410 410  (% style="color:#4f81bd" %)**Measurement the soil surface:**
443 +)))
411 411  
445 +(((
412 412  [[image:1654592946732-634.png]]
447 +)))
413 413  
449 +(((
414 414  Choose the proper measuring position. Split the surface soil according to the measured deep.
451 +)))
415 415  
453 +(((
416 416  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
455 +)))
417 417  
457 +(((
418 418  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
459 +)))
419 419  
461 +(((
420 420  Put soil over the probe after insert. And start to measure.
463 +)))
421 421  
465 +(((
466 +
467 +)))
422 422  
469 +(((
423 423  (% style="color:#4f81bd" %)**Measurement inside soil:**
471 +)))
424 424  
473 +(((
425 425  Dig a hole with diameter > 20CM.
475 +)))
426 426  
477 +(((
427 427  Insert the probe inside, method like measure the surface.
479 +)))
428 428  
429 429  
430 430  
... ... @@ -454,9 +454,13 @@
454 454  
455 455  == 2.7 Calibration ==
456 456  
509 +(((
457 457  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
511 +)))
458 458  
513 +(((
459 459  After stable, user can use below command to calibrate.
515 +)))
460 460  
461 461  [[image:image-20220607171149-4.png]]
462 462  
... ... @@ -463,7 +463,7 @@
463 463  
464 464  (% style="color:#037691" %)**Calibration Payload**
465 465  
466 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
522 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
467 467  |(((
468 468  **Size**
469 469  
... ... @@ -478,7 +478,7 @@
478 478  
479 479  Calibrate value
480 480  )))|Reserve|(((
481 -[[Message Type>>path:#H2.3.6MessageType]]
537 +[[Message Type>>||anchor="H2.3.6MessageType"]]
482 482  
483 483  Always 0x03
484 484  )))
... ... @@ -492,8 +492,6 @@
492 492  * Reply to non-confirmed packet: 14 00
493 493  
494 494  
495 -
496 -
497 497  == 2.8 Frequency Plans ==
498 498  
499 499  (((
... ... @@ -503,32 +503,61 @@
503 503  
504 504  === 2.8.1 EU863-870 (EU868) ===
505 505  
560 +(((
506 506  (% style="color:blue" %)**Uplink:**
562 +)))
507 507  
564 +(((
508 508  868.1 - SF7BW125 to SF12BW125
566 +)))
509 509  
568 +(((
510 510  868.3 - SF7BW125 to SF12BW125 and SF7BW250
570 +)))
511 511  
572 +(((
512 512  868.5 - SF7BW125 to SF12BW125
574 +)))
513 513  
576 +(((
514 514  867.1 - SF7BW125 to SF12BW125
578 +)))
515 515  
580 +(((
516 516  867.3 - SF7BW125 to SF12BW125
582 +)))
517 517  
584 +(((
518 518  867.5 - SF7BW125 to SF12BW125
586 +)))
519 519  
588 +(((
520 520  867.7 - SF7BW125 to SF12BW125
590 +)))
521 521  
592 +(((
522 522  867.9 - SF7BW125 to SF12BW125
594 +)))
523 523  
596 +(((
524 524  868.8 - FSK
598 +)))
525 525  
600 +(((
601 +
602 +)))
526 526  
604 +(((
527 527  (% style="color:blue" %)**Downlink:**
606 +)))
528 528  
608 +(((
529 529  Uplink channels 1-9 (RX1)
610 +)))
530 530  
612 +(((
531 531  869.525 - SF9BW125 (RX2 downlink only)
614 +)))
532 532  
533 533  
534 534  
... ... @@ -552,46 +552,89 @@
552 552  
553 553  === 2.8.3 CN470-510 (CN470) ===
554 554  
638 +(((
555 555  Used in China, Default use CHE=1
640 +)))
556 556  
642 +(((
557 557  (% style="color:blue" %)**Uplink:**
644 +)))
558 558  
646 +(((
559 559  486.3 - SF7BW125 to SF12BW125
648 +)))
560 560  
650 +(((
561 561  486.5 - SF7BW125 to SF12BW125
652 +)))
562 562  
654 +(((
563 563  486.7 - SF7BW125 to SF12BW125
656 +)))
564 564  
658 +(((
565 565  486.9 - SF7BW125 to SF12BW125
660 +)))
566 566  
662 +(((
567 567  487.1 - SF7BW125 to SF12BW125
664 +)))
568 568  
666 +(((
569 569  487.3 - SF7BW125 to SF12BW125
668 +)))
570 570  
670 +(((
571 571  487.5 - SF7BW125 to SF12BW125
672 +)))
572 572  
674 +(((
573 573  487.7 - SF7BW125 to SF12BW125
676 +)))
574 574  
678 +(((
679 +
680 +)))
575 575  
682 +(((
576 576  (% style="color:blue" %)**Downlink:**
684 +)))
577 577  
686 +(((
578 578  506.7 - SF7BW125 to SF12BW125
688 +)))
579 579  
690 +(((
580 580  506.9 - SF7BW125 to SF12BW125
692 +)))
581 581  
694 +(((
582 582  507.1 - SF7BW125 to SF12BW125
696 +)))
583 583  
698 +(((
584 584  507.3 - SF7BW125 to SF12BW125
700 +)))
585 585  
702 +(((
586 586  507.5 - SF7BW125 to SF12BW125
704 +)))
587 587  
706 +(((
588 588  507.7 - SF7BW125 to SF12BW125
708 +)))
589 589  
710 +(((
590 590  507.9 - SF7BW125 to SF12BW125
712 +)))
591 591  
714 +(((
592 592  508.1 - SF7BW125 to SF12BW125
716 +)))
593 593  
718 +(((
594 594  505.3 - SF12BW125 (RX2 downlink only)
720 +)))
595 595  
596 596  
597 597  
... ... @@ -616,111 +616,219 @@
616 616  * Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617 617  * Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618 618  
619 -
620 620  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
621 621  
747 +(((
622 622  (% style="color:blue" %)**Default Uplink channel:**
749 +)))
623 623  
751 +(((
624 624  923.2 - SF7BW125 to SF10BW125
753 +)))
625 625  
755 +(((
626 626  923.4 - SF7BW125 to SF10BW125
757 +)))
627 627  
759 +(((
760 +
761 +)))
628 628  
763 +(((
629 629  (% style="color:blue" %)**Additional Uplink Channel**:
765 +)))
630 630  
767 +(((
631 631  (OTAA mode, channel added by JoinAccept message)
769 +)))
632 632  
771 +(((
772 +
773 +)))
633 633  
775 +(((
634 634  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
777 +)))
635 635  
779 +(((
636 636  922.2 - SF7BW125 to SF10BW125
781 +)))
637 637  
783 +(((
638 638  922.4 - SF7BW125 to SF10BW125
785 +)))
639 639  
787 +(((
640 640  922.6 - SF7BW125 to SF10BW125
789 +)))
641 641  
791 +(((
642 642  922.8 - SF7BW125 to SF10BW125
793 +)))
643 643  
795 +(((
644 644  923.0 - SF7BW125 to SF10BW125
797 +)))
645 645  
799 +(((
646 646  922.0 - SF7BW125 to SF10BW125
801 +)))
647 647  
803 +(((
804 +
805 +)))
648 648  
807 +(((
649 649  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
809 +)))
650 650  
811 +(((
651 651  923.6 - SF7BW125 to SF10BW125
813 +)))
652 652  
815 +(((
653 653  923.8 - SF7BW125 to SF10BW125
817 +)))
654 654  
819 +(((
655 655  924.0 - SF7BW125 to SF10BW125
821 +)))
656 656  
823 +(((
657 657  924.2 - SF7BW125 to SF10BW125
825 +)))
658 658  
827 +(((
659 659  924.4 - SF7BW125 to SF10BW125
829 +)))
660 660  
831 +(((
661 661  924.6 - SF7BW125 to SF10BW125
833 +)))
662 662  
835 +(((
836 +
837 +)))
663 663  
839 +(((
664 664  (% style="color:blue" %)**Downlink:**
841 +)))
665 665  
843 +(((
666 666  Uplink channels 1-8 (RX1)
845 +)))
667 667  
847 +(((
668 668  923.2 - SF10BW125 (RX2)
849 +)))
669 669  
670 670  
671 671  
672 672  === 2.8.6 KR920-923 (KR920) ===
673 673  
855 +(((
674 674  (% style="color:blue" %)**Default channel:**
857 +)))
675 675  
859 +(((
676 676  922.1 - SF7BW125 to SF12BW125
861 +)))
677 677  
863 +(((
678 678  922.3 - SF7BW125 to SF12BW125
865 +)))
679 679  
867 +(((
680 680  922.5 - SF7BW125 to SF12BW125
869 +)))
681 681  
871 +(((
872 +
873 +)))
682 682  
875 +(((
683 683  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
877 +)))
684 684  
879 +(((
685 685  922.1 - SF7BW125 to SF12BW125
881 +)))
686 686  
883 +(((
687 687  922.3 - SF7BW125 to SF12BW125
885 +)))
688 688  
887 +(((
689 689  922.5 - SF7BW125 to SF12BW125
889 +)))
690 690  
891 +(((
691 691  922.7 - SF7BW125 to SF12BW125
893 +)))
692 692  
895 +(((
693 693  922.9 - SF7BW125 to SF12BW125
897 +)))
694 694  
899 +(((
695 695  923.1 - SF7BW125 to SF12BW125
901 +)))
696 696  
903 +(((
697 697  923.3 - SF7BW125 to SF12BW125
905 +)))
698 698  
907 +(((
908 +
909 +)))
699 699  
911 +(((
700 700  (% style="color:blue" %)**Downlink:**
913 +)))
701 701  
915 +(((
702 702  Uplink channels 1-7(RX1)
917 +)))
703 703  
919 +(((
704 704  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
921 +)))
705 705  
706 706  
707 707  
708 708  === 2.8.7 IN865-867 (IN865) ===
709 709  
927 +(((
710 710  (% style="color:blue" %)**Uplink:**
929 +)))
711 711  
931 +(((
712 712  865.0625 - SF7BW125 to SF12BW125
933 +)))
713 713  
935 +(((
714 714  865.4025 - SF7BW125 to SF12BW125
937 +)))
715 715  
939 +(((
716 716  865.9850 - SF7BW125 to SF12BW125
941 +)))
717 717  
943 +(((
944 +
945 +)))
718 718  
947 +(((
719 719  (% style="color:blue" %)**Downlink:**
949 +)))
720 720  
951 +(((
721 721  Uplink channels 1-3 (RX1)
953 +)))
722 722  
955 +(((
723 723  866.550 - SF10BW125 (RX2)
957 +)))
724 724  
725 725  
726 726  
... ... @@ -746,26 +746,51 @@
746 746  
747 747  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748 748  
983 +(((
749 749  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
985 +)))
750 750  
751 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
987 +* (((
988 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
989 +)))
990 +* (((
991 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
992 +)))
753 753  
994 +(((
754 754  There are two kinds of commands to configure LSPH01, they are:
996 +)))
755 755  
756 -* (% style="color:#4f81bd" %)** General Commands**.
998 +* (((
999 +(% style="color:#4f81bd" %)** General Commands**.
1000 +)))
757 757  
1002 +(((
758 758  These commands are to configure:
1004 +)))
759 759  
760 -* General system settings like: uplink interval.
761 -* LoRaWAN protocol & radio related command.
1006 +* (((
1007 +General system settings like: uplink interval.
1008 +)))
1009 +* (((
1010 +LoRaWAN protocol & radio related command.
1011 +)))
762 762  
1013 +(((
763 763  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1015 +)))
764 764  
1017 +(((
1018 +
1019 +)))
765 765  
766 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1021 +* (((
1022 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1023 +)))
767 767  
1025 +(((
768 768  These commands only valid for LSPH01, as below:
1027 +)))
769 769  
770 770  
771 771  
... ... @@ -779,15 +779,28 @@
779 779  
780 780  
781 781  
1041 +(((
782 782  (% style="color:#037691" %)**Downlink Command: 0x01**
1043 +)))
783 783  
1045 +(((
784 784  Format: Command Code (0x01) followed by 3 bytes time value.
1047 +)))
785 785  
1049 +(((
786 786  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1051 +)))
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1053 +* (((
1054 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1055 +)))
1056 +* (((
1057 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790 790  
1059 +
1060 +
1061 +)))
1062 +
791 791  == 3.2 Set Interrupt Mode ==
792 792  
793 793  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -797,19 +797,34 @@
797 797  [[image:image-20220607171716-9.png]]
798 798  
799 799  
1072 +(((
800 800  (% style="color:#037691" %)**Downlink Command: 0x06**
1074 +)))
801 801  
1076 +(((
802 802  Format: Command Code (0x06) followed by 3 bytes.
1078 +)))
803 803  
1080 +(((
804 804  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1082 +)))
805 805  
806 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
807 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1084 +* (((
1085 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1086 +)))
1087 +* (((
1088 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1089 +)))
808 808  
1091 +(((
1092 +
1093 +)))
809 809  
1095 +
1096 +
810 810  == 3.3 Calibrate Sensor ==
811 811  
812 -Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
1099 +Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
813 813  
814 814  
815 815  
... ... @@ -841,7 +841,7 @@
841 841  
842 842  Version
843 843  )))|Sensor Type|Reserve|(((
844 -[[Message Type>>path:#H2.3.6MessageType]]
1131 +[[Message Type>>||anchor="H2.3.6MessageType"]]
845 845  Always 0x02
846 846  )))
847 847  
... ... @@ -981,9 +981,13 @@
981 981  
982 982  === ​4.3.2 Replace the battery ===
983 983  
1271 +(((
984 984  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1273 +)))
985 985  
1275 +(((
986 986  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1277 +)))
987 987  
988 988  
989 989  
... ... @@ -1004,24 +1004,24 @@
1004 1004  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1005 1005  
1006 1006  
1298 +(((
1007 1007  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1300 +)))
1008 1008  
1009 1009  
1010 1010   [[image:1654593712276-618.png]]
1011 1011  
1012 -Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1305 +Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1013 1013  
1014 1014  
1015 -
1016 1016  = 6. FAQ =
1017 1017  
1018 1018  == 6.1 How to change the LoRa Frequency Bands/Region ==
1019 1019  
1020 -You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
1312 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1021 1021  When downloading the images, choose the required image file for download. ​
1022 1022  
1023 1023  
1024 -
1025 1025  = 7. Trouble Shooting =
1026 1026  
1027 1027  == 7.1 AT Commands input doesn’t work ==
... ... @@ -1029,7 +1029,6 @@
1029 1029  In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1030 1030  
1031 1031  
1032 -
1033 1033  = 8. Order Info =
1034 1034  
1035 1035  Part Number: (% style="color:blue" %)**LSPH01-XX**
... ... @@ -1046,7 +1046,6 @@
1046 1046  * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1047 1047  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1048 1048  
1049 -
1050 1050  = 9. ​Packing Info =
1051 1051  
1052 1052  
... ... @@ -1061,7 +1061,6 @@
1061 1061  * Package Size / pcs : cm
1062 1062  * Weight / pcs : g
1063 1063  
1064 -
1065 1065  = 10. ​Support =
1066 1066  
1067 1067  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0