Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -67,20 +67,29 @@
67	67
68	68
69	69
70		-
71	71	= 1. Introduction =
72	72
73	73	== 1.1 ​What is LoRaWAN Soil pH Sensor ==
74	74
	74	+(((
75	75	The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
	76	+)))
76	76
	78	+(((
77	77	LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
	80	+)))
78	78
	82	+(((
79	79	The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
	84	+)))
80	80
	86	+(((
81	81	LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
	88	+)))
82	82
	90	+(((
83	83	Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
	92	+)))
84	84
85	85
86	86	[[image:1654592435432-887.png]]
...	...	@@ -87,6 +87,7 @@
87	87
88	88
89	89
	99	+
90	90	== ​1.2 Features ==
91	91
92	92	* LoRaWAN 1.0.3 Class A
...	...	@@ -104,7 +104,6 @@
104	104	* 8500mAh Battery for long term use
105	105
106	106
107		-
108	108	== 1.3 Probe Specification ==
109	109
110	110
...	...	@@ -126,13 +126,11 @@
126	126	* Length: 3.5 meters
127	127
128	128
129		-
130	130	== 1.4 ​Applications ==
131	131
132	132	* Smart Agriculture
133	133
134	134
135		-
136	136	== 1.5 Pin mapping and power on ==
137	137
138	138	[[image:1654592472094-134.png]]
...	...	@@ -148,7 +148,7 @@
148	148	)))
149	149
150	150	(((
151		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>path:#H5.UseATCommand]]to set the keys in the LSPH01.
	158	+In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.
152	152	)))
153	153
154	154
...	...	@@ -211,7 +211,9 @@
211	211	[[image:image-20220607170442-2.png]]
212	212
213	213
	221	+(((
214	214	(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	223	+)))
215	215
216	216	[[image:1654592697690-910.png]]
217	217
...	...	@@ -219,11 +219,17 @@
219	219
220	220	== 2.3 ​Uplink Payload ==
221	221
	231	+(((
222	222	LSPH01 will uplink payload via LoRaWAN with below payload format:
	233	+)))
223	223
	235	+(((
224	224	Uplink payload includes in total 11 bytes.
	237	+)))
225	225
	239	+(((
226	226	Normal uplink payload:
	241	+)))
227	227
228	228	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
229	229	|(((
...	...	@@ -231,14 +231,14 @@
231	231
232	232	**(bytes)**
233	233	)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**
234		-|**Value**|[[BAT>>path:#H2.3.1BatteryInfo]]|(((
235		-[[Temperature>>path:#H2.3.2DS18B20Temperaturesensor]]
	249	+|**Value**|[[BAT>>||anchor="2.3.1BatteryInfo"]]|(((
	250	+[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
236	236
237		-[[(Optional)>>path:#H2.3.2DS18B20Temperaturesensor]]
238		-)))|[[Soil pH>>path:#H2.3.3SoilpH]]|[[Soil Temperature>>path:#H2.3.4SoilTemperature]]|(((
239		-[[Digital Interrupt (Optional)>>path:#H2.3.5InterruptPin]]
	252	+[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]
	253	+)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((
	254	+[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]
240	240	)))|Reserve|(((
241		-[[Message Type>>path:#H2.3.6MessageType]]
	256	+[[Message Type>>||anchor="H2.3.6MessageType"]]
242	242	)))
243	243
244	244	[[image:1654592721645-318.png]]
...	...	@@ -294,7 +294,7 @@
294	294
295	295	=== 2.3.5 Interrupt Pin ===
296	296
297		-This data field shows if this packet is generated by interrupt or not. [[Click here>>path:#H3.2SetInterruptMode]] for the hardware and software set up.
	312	+This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.
298	298
299	299
300	300	**Example:**
...	...	@@ -307,20 +307,21 @@
307	307
308	308	=== 2.3.6 Message Type ===
309	309
	325	+(((
310	310	For a normal uplink payload, the message type is always 0x01.
	327	+)))
311	311
	329	+(((
312	312	Valid Message Type:
	331	+)))
313	313
314	314
315	315	(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
316		-|**Message Type Code**|**Description**|**Payload**
317		-|0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
318		-|0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
319		-|0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
	335	+|=**Message Type Code**|=**Description**|=**Payload**
	336	+|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]
	337	+|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]
	338	+|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]
320	320
321		-
322		-
323		-
324	324	=== 2.3.7 Decode payload in The Things Network ===
325	325
326	326	While using TTN network, you can add the payload format to decode the payload.
...	...	@@ -346,12 +346,21 @@
346	346
347	347	== 2.5 ​Show Data in DataCake IoT Server ==
348	348
	365	+(((
349	349	[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
	367	+)))
350	350
	369	+(((
	370	+
	371	+)))
351	351
	373	+(((
352	352	(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
	375	+)))
353	353
	377	+(((
354	354	(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
	379	+)))
355	355
356	356
357	357	[[image:1654592790040-760.png]]
...	...	@@ -374,9 +374,13 @@
374	374	[[image:1654592856403-259.png]]
375	375
376	376
	402	+(((
377	377	(% style="color:blue" %)**Step 5**(%%)**: add payload decode**
	404	+)))
378	378
	406	+(((
379	379	Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
	408	+)))
380	380
381	381
382	382	[[image:1654592878525-845.png]]
...	...	@@ -399,8 +399,10 @@
399	399	=== 2.6.1 Before measurement ===
400	400
401	401	(((
	431	+(((
402	402	If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
403	403	)))
	434	+)))
404	404
405	405
406	406
...	...	@@ -407,24 +407,45 @@
407	407	=== 2.6.2 Measurement ===
408	408
409	409
	441	+(((
410	410	(% style="color:#4f81bd" %)**Measurement the soil surface:**
	443	+)))
411	411
	445	+(((
412	412	[[image:1654592946732-634.png]]
	447	+)))
413	413
	449	+(((
414	414	Choose the proper measuring position. Split the surface soil according to the measured deep.
	451	+)))
415	415
	453	+(((
416	416	Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
	455	+)))
417	417
	457	+(((
418	418	Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
	459	+)))
419	419
	461	+(((
420	420	Put soil over the probe after insert. And start to measure.
	463	+)))
421	421
	465	+(((
	466	+
	467	+)))
422	422
	469	+(((
423	423	(% style="color:#4f81bd" %)**Measurement inside soil:**
	471	+)))
424	424
	473	+(((
425	425	Dig a hole with diameter > 20CM.
	475	+)))
426	426
	477	+(((
427	427	Insert the probe inside, method like measure the surface.
	479	+)))
428	428
429	429
430	430
...	...	@@ -454,9 +454,13 @@
454	454
455	455	== 2.7 Calibration ==
456	456
	509	+(((
457	457	User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
	511	+)))
458	458
	513	+(((
459	459	After stable, user can use below command to calibrate.
	515	+)))
460	460
461	461	[[image:image-20220607171149-4.png]]
462	462
...	...	@@ -463,7 +463,7 @@
463	463
464	464	(% style="color:#037691" %)**Calibration Payload**
465	465
466		-(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
	522	+(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
467	467	|(((
468	468	**Size**
469	469
...	...	@@ -478,7 +478,7 @@
478	478
479	479	Calibrate value
480	480	)))|Reserve|(((
481		-[[Message Type>>path:#H2.3.6MessageType]]
	537	+[[Message Type>>||anchor="H2.3.6MessageType"]]
482	482
483	483	Always 0x03
484	484	)))
...	...	@@ -491,9 +491,6 @@
491	491	* Reply to the confirmation package: 14 01
492	492	* Reply to non-confirmed packet: 14 00
493	493
494		-
495		-
496		-
497	497	== 2.8 Frequency Plans ==
498	498
499	499	(((
...	...	@@ -503,32 +503,61 @@
503	503
504	504	=== 2.8.1 EU863-870 (EU868) ===
505	505
	559	+(((
506	506	(% style="color:blue" %)**Uplink:**
	561	+)))
507	507
	563	+(((
508	508	868.1 - SF7BW125 to SF12BW125
	565	+)))
509	509
	567	+(((
510	510	868.3 - SF7BW125 to SF12BW125 and SF7BW250
	569	+)))
511	511
	571	+(((
512	512	868.5 - SF7BW125 to SF12BW125
	573	+)))
513	513
	575	+(((
514	514	867.1 - SF7BW125 to SF12BW125
	577	+)))
515	515
	579	+(((
516	516	867.3 - SF7BW125 to SF12BW125
	581	+)))
517	517
	583	+(((
518	518	867.5 - SF7BW125 to SF12BW125
	585	+)))
519	519
	587	+(((
520	520	867.7 - SF7BW125 to SF12BW125
	589	+)))
521	521
	591	+(((
522	522	867.9 - SF7BW125 to SF12BW125
	593	+)))
523	523
	595	+(((
524	524	868.8 - FSK
	597	+)))
525	525
	599	+(((
	600	+
	601	+)))
526	526
	603	+(((
527	527	(% style="color:blue" %)**Downlink:**
	605	+)))
528	528
	607	+(((
529	529	Uplink channels 1-9 (RX1)
	609	+)))
530	530
	611	+(((
531	531	869.525 - SF9BW125 (RX2 downlink only)
	613	+)))
532	532
533	533
534	534
...	...	@@ -549,49 +549,91 @@
549	549	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
550	550	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
551	551
552		-
553	553	=== 2.8.3 CN470-510 (CN470) ===
554	554
	636	+(((
555	555	Used in China, Default use CHE=1
	638	+)))
556	556
	640	+(((
557	557	(% style="color:blue" %)**Uplink:**
	642	+)))
558	558
	644	+(((
559	559	486.3 - SF7BW125 to SF12BW125
	646	+)))
560	560
	648	+(((
561	561	486.5 - SF7BW125 to SF12BW125
	650	+)))
562	562
	652	+(((
563	563	486.7 - SF7BW125 to SF12BW125
	654	+)))
564	564
	656	+(((
565	565	486.9 - SF7BW125 to SF12BW125
	658	+)))
566	566
	660	+(((
567	567	487.1 - SF7BW125 to SF12BW125
	662	+)))
568	568
	664	+(((
569	569	487.3 - SF7BW125 to SF12BW125
	666	+)))
570	570
	668	+(((
571	571	487.5 - SF7BW125 to SF12BW125
	670	+)))
572	572
	672	+(((
573	573	487.7 - SF7BW125 to SF12BW125
	674	+)))
574	574
	676	+(((
	677	+
	678	+)))
575	575
	680	+(((
576	576	(% style="color:blue" %)**Downlink:**
	682	+)))
577	577
	684	+(((
578	578	506.7 - SF7BW125 to SF12BW125
	686	+)))
579	579
	688	+(((
580	580	506.9 - SF7BW125 to SF12BW125
	690	+)))
581	581
	692	+(((
582	582	507.1 - SF7BW125 to SF12BW125
	694	+)))
583	583
	696	+(((
584	584	507.3 - SF7BW125 to SF12BW125
	698	+)))
585	585
	700	+(((
586	586	507.5 - SF7BW125 to SF12BW125
	702	+)))
587	587
	704	+(((
588	588	507.7 - SF7BW125 to SF12BW125
	706	+)))
589	589
	708	+(((
590	590	507.9 - SF7BW125 to SF12BW125
	710	+)))
591	591
	712	+(((
592	592	508.1 - SF7BW125 to SF12BW125
	714	+)))
593	593
	716	+(((
594	594	505.3 - SF12BW125 (RX2 downlink only)
	718	+)))
595	595
596	596
597	597
...	...	@@ -616,111 +616,219 @@
616	616	* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band
617	617	* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)
618	618
619		-
620	620	=== 2.8.5 AS920-923 & AS923-925 (AS923) ===
621	621
	745	+(((
622	622	(% style="color:blue" %)**Default Uplink channel:**
	747	+)))
623	623
	749	+(((
624	624	923.2 - SF7BW125 to SF10BW125
	751	+)))
625	625
	753	+(((
626	626	923.4 - SF7BW125 to SF10BW125
	755	+)))
627	627
	757	+(((
	758	+
	759	+)))
628	628
	761	+(((
629	629	(% style="color:blue" %)**Additional Uplink Channel**:
	763	+)))
630	630
	765	+(((
631	631	(OTAA mode, channel added by JoinAccept message)
	767	+)))
632	632
	769	+(((
	770	+
	771	+)))
633	633
	773	+(((
634	634	(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
	775	+)))
635	635
	777	+(((
636	636	922.2 - SF7BW125 to SF10BW125
	779	+)))
637	637
	781	+(((
638	638	922.4 - SF7BW125 to SF10BW125
	783	+)))
639	639
	785	+(((
640	640	922.6 - SF7BW125 to SF10BW125
	787	+)))
641	641
	789	+(((
642	642	922.8 - SF7BW125 to SF10BW125
	791	+)))
643	643
	793	+(((
644	644	923.0 - SF7BW125 to SF10BW125
	795	+)))
645	645
	797	+(((
646	646	922.0 - SF7BW125 to SF10BW125
	799	+)))
647	647
	801	+(((
	802	+
	803	+)))
648	648
	805	+(((
649	649	(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
	807	+)))
650	650
	809	+(((
651	651	923.6 - SF7BW125 to SF10BW125
	811	+)))
652	652
	813	+(((
653	653	923.8 - SF7BW125 to SF10BW125
	815	+)))
654	654
	817	+(((
655	655	924.0 - SF7BW125 to SF10BW125
	819	+)))
656	656
	821	+(((
657	657	924.2 - SF7BW125 to SF10BW125
	823	+)))
658	658
	825	+(((
659	659	924.4 - SF7BW125 to SF10BW125
	827	+)))
660	660
	829	+(((
661	661	924.6 - SF7BW125 to SF10BW125
	831	+)))
662	662
	833	+(((
	834	+
	835	+)))
663	663
	837	+(((
664	664	(% style="color:blue" %)**Downlink:**
	839	+)))
665	665
	841	+(((
666	666	Uplink channels 1-8 (RX1)
	843	+)))
667	667
	845	+(((
668	668	923.2 - SF10BW125 (RX2)
	847	+)))
669	669
670	670
671	671
672	672	=== 2.8.6 KR920-923 (KR920) ===
673	673
	853	+(((
674	674	(% style="color:blue" %)**Default channel:**
	855	+)))
675	675
	857	+(((
676	676	922.1 - SF7BW125 to SF12BW125
	859	+)))
677	677
	861	+(((
678	678	922.3 - SF7BW125 to SF12BW125
	863	+)))
679	679
	865	+(((
680	680	922.5 - SF7BW125 to SF12BW125
	867	+)))
681	681
	869	+(((
	870	+
	871	+)))
682	682
	873	+(((
683	683	(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
	875	+)))
684	684
	877	+(((
685	685	922.1 - SF7BW125 to SF12BW125
	879	+)))
686	686
	881	+(((
687	687	922.3 - SF7BW125 to SF12BW125
	883	+)))
688	688
	885	+(((
689	689	922.5 - SF7BW125 to SF12BW125
	887	+)))
690	690
	889	+(((
691	691	922.7 - SF7BW125 to SF12BW125
	891	+)))
692	692
	893	+(((
693	693	922.9 - SF7BW125 to SF12BW125
	895	+)))
694	694
	897	+(((
695	695	923.1 - SF7BW125 to SF12BW125
	899	+)))
696	696
	901	+(((
697	697	923.3 - SF7BW125 to SF12BW125
	903	+)))
698	698
	905	+(((
	906	+
	907	+)))
699	699
	909	+(((
700	700	(% style="color:blue" %)**Downlink:**
	911	+)))
701	701
	913	+(((
702	702	Uplink channels 1-7(RX1)
	915	+)))
703	703
	917	+(((
704	704	921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
	919	+)))
705	705
706	706
707	707
708	708	=== 2.8.7 IN865-867 (IN865) ===
709	709
	925	+(((
710	710	(% style="color:blue" %)**Uplink:**
	927	+)))
711	711
	929	+(((
712	712	865.0625 - SF7BW125 to SF12BW125
	931	+)))
713	713
	933	+(((
714	714	865.4025 - SF7BW125 to SF12BW125
	935	+)))
715	715
	937	+(((
716	716	865.9850 - SF7BW125 to SF12BW125
	939	+)))
717	717
	941	+(((
	942	+
	943	+)))
718	718
	945	+(((
719	719	(% style="color:blue" %)**Downlink:**
	947	+)))
720	720
	949	+(((
721	721	Uplink channels 1-3 (RX1)
	951	+)))
722	722
	953	+(((
723	723	866.550 - SF10BW125 (RX2)
	955	+)))
724	724
725	725
726	726
...	...	@@ -731,7 +731,6 @@
731	731	* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
732	732	* Blink once when device transmit a packet.
733	733
734		-
735	735	== 2.10 ​Firmware Change Log ==
736	736
737	737
...	...	@@ -746,26 +746,51 @@
746	746
747	747	= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
748	748
	980	+(((
749	749	Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
	982	+)))
750	750
751		-* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
752		-* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	984	+* (((
	985	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
	986	+)))
	987	+* (((
	988	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
	989	+)))
753	753
	991	+(((
754	754	There are two kinds of commands to configure LSPH01, they are:
	993	+)))
755	755
756		-* (% style="color:#4f81bd" %)** General Commands**.
	995	+* (((
	996	+(% style="color:#4f81bd" %)** General Commands**.
	997	+)))
757	757
	999	+(((
758	758	These commands are to configure:
	1001	+)))
759	759
760		-* General system settings like: uplink interval.
761		-* LoRaWAN protocol & radio related command.
	1003	+* (((
	1004	+General system settings like: uplink interval.
	1005	+)))
	1006	+* (((
	1007	+LoRaWAN protocol & radio related command.
	1008	+)))
762	762
	1010	+(((
763	763	They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	1012	+)))
764	764
	1014	+(((
	1015	+
	1016	+)))
765	765
766		-* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1018	+* (((
	1019	+(% style="color:#4f81bd" %)** Commands special design for LSPH01**
	1020	+)))
767	767
	1022	+(((
768	768	These commands only valid for LSPH01, as below:
	1024	+)))
769	769
770	770
771	771
...	...	@@ -779,18 +779,28 @@
779	779
780	780
781	781
	1038	+(((
782	782	(% style="color:#037691" %)**Downlink Command: 0x01**
	1040	+)))
783	783
	1042	+(((
784	784	Format: Command Code (0x01) followed by 3 bytes time value.
	1044	+)))
785	785
	1046	+(((
786	786	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	1048	+)))
787	787
788		-* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789		-* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	1050	+* (((
	1051	+Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	1052	+)))
	1053	+* (((
	1054	+Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
790	790
791	791
	1057	+
	1058	+)))
792	792
793		-
794	794	== 3.2 Set Interrupt Mode ==
795	795
796	796	Feature, Set Interrupt mode for GPIO_EXIT.
...	...	@@ -800,19 +800,34 @@
800	800	[[image:image-20220607171716-9.png]]
801	801
802	802
	1069	+(((
803	803	(% style="color:#037691" %)**Downlink Command: 0x06**
	1071	+)))
804	804
	1073	+(((
805	805	Format: Command Code (0x06) followed by 3 bytes.
	1075	+)))
806	806
	1077	+(((
807	807	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1079	+)))
808	808
809		-* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
810		-* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1081	+* (((
	1082	+Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	1083	+)))
	1084	+* (((
	1085	+Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	1086	+)))
811	811
	1088	+(((
	1089	+
	1090	+)))
812	812
	1092	+
	1093	+
813	813	== 3.3 Calibrate Sensor ==
814	814
815		-Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
	1096	+Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands
816	816
817	817
818	818
...	...	@@ -827,7 +827,6 @@
827	827	* Reply to the confirmation package: 26 01
828	828	* Reply to non-confirmed packet: 26 00
829	829
830		-
831	831	Device will send an uplink after got this downlink command. With below payload:
832	832
833	833	Configures info payload:
...	...	@@ -845,7 +845,7 @@
845	845
846	846	Version
847	847	)))|Sensor Type|Reserve|(((
848		-[[Message Type>>path:#H2.3.6MessageType]]
	1128	+[[Message Type>>||anchor="H2.3.6MessageType"]]
849	849	Always 0x02
850	850	)))
851	851
...	...	@@ -985,9 +985,13 @@
985	985
986	986	=== ​4.3.2 Replace the battery ===
987	987
	1268	+(((
988	988	You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
	1270	+)))
989	989
	1272	+(((
990	990	The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
	1274	+)))
991	991
992	992
993	993
...	...	@@ -1008,24 +1008,24 @@
1008	1008	(% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1009	1009
1010	1010
	1295	+(((
1011	1011	In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
	1297	+)))
1012	1012
1013	1013
1014	1014	[[image:1654593712276-618.png]]
1015	1015
1016		-Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
	1302	+Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].
1017	1017
1018	1018
1019		-
1020	1020	= 6. FAQ =
1021	1021
1022	1022	== 6.1 How to change the LoRa Frequency Bands/Region ==
1023	1023
1024		-You can follow the instructions for [[how to upgrade image>>path:#H2.10200BFirmwareChangeLog]].
	1309	+You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
1025	1025	When downloading the images, choose the required image file for download. ​
1026	1026
1027	1027
1028		-
1029	1029	= 7. Trouble Shooting =
1030	1030
1031	1031	== 7.1 AT Commands input doesn’t work ==
...	...	@@ -1033,7 +1033,6 @@
1033	1033	In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1034	1034
1035	1035
1036		-
1037	1037	= 8. Order Info =
1038	1038
1039	1039	Part Number: (% style="color:blue" %)**LSPH01-XX**
...	...	@@ -1050,7 +1050,6 @@
1050	1050	* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1051	1051	* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1052	1052
1053		-
1054	1054	= 9. ​Packing Info =
1055	1055
1056	1056
...	...	@@ -1065,7 +1065,6 @@
1065	1065	* Package Size / pcs : cm
1066	1066	* Weight / pcs : g
1067	1067
1068		-
1069	1069	= 10. ​Support =
1070	1070
1071	1071	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.