Skip to Content
Last modified by Mengting Qiu on 2025/08/06 17:02
From version 173.5
edited by Xiaoling
on 2022/06/15 10:15
Change comment: There is no comment for this version
To version 150.51
edited by Xiaoling
on 2022/06/11 09:19
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LDDS20 - LoRaWAN Ultrasonic Liquid Level Sensor User Manual
1 +LDDS75 - LoRaWAN Distance Detection Sensor User Manual
Content
... ... @@ -1,10 +1,11 @@
1 1  (% style="text-align:center" %)
2 -[[image:1655254599445-662.png]]
2 +[[image:1654846127817-788.png]]
3 3  
4 +**Contents:**
4 4  
6 +{{toc/}}
5 5  
6 6  
7 -**Table of Contents:**
8 8  
9 9  
10 10  
... ... @@ -11,11 +11,9 @@
11 11  
12 12  
13 13  
14 -
15 -
16 16  = 1.  Introduction =
17 17  
18 -== 1.1 ​ What is LoRaWAN Ultrasonic liquid level Sensor ==
17 +== 1.1 ​ What is LoRaWAN Distance Detection Sensor ==
19 19  
20 20  (((
21 21  
... ... @@ -22,8 +22,7 @@
22 22  
23 23  (((
24 24  (((
25 -(((
26 -The Dragino LDDS20 is a (% style="color:#4472c4" %)**LoRaWAN Ultrasonic liquid level sensor**(%%) for Internet of Things solution. It uses (% style="color:#4472c4" %)**none-contact method **(%%)to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server
24 +The Dragino LDDS75 is a (% style="color:#4472c4" %)** LoRaWAN Distance Detection Sensor**(%%) for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses (% style="color:#4472c4" %)** ultrasonic sensing** (%%)technology for distance measurement, and (% style="color:#4472c4" %)** temperature compensation**(%%) is performed internally to improve the reliability of data. The LDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc.
27 27  )))
28 28  
29 29  (((
... ... @@ -31,7 +31,7 @@
31 31  )))
32 32  
33 33  (((
34 -The LDDS20 sensor is installed directly below the container to detect the height of the liquid level. User doesn’t need to open a hole on the container to be tested. The (% style="color:#4472c4" %)**none-contact measurement makes the measurement safety, easier and possible for some strict situation**. 
32 +It detects the distance** (% style="color:#4472c4" %) between the measured object and the sensor(%%)**, and uploads the value via wireless to LoRaWAN IoT Server.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,7 +39,7 @@
39 39  )))
40 40  
41 41  (((
42 -LDDS20 uses ultrasonic sensing technology for distance measurement. LDDS20 is of high accuracy to measure various liquid such as: (% style="color:#4472c4" %)**toxic substances**(%%), (% style="color:#4472c4" %)**strong acids**(%%), (% style="color:#4472c4" %)**strong alkalis**(%%) and (% style="color:#4472c4" %)**various pure liquids**(%%) in high-temperature and high-pressure airtight containers.
40 +The LoRa wireless technology used in LDDS75 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
43 43  )))
44 44  
45 45  (((
... ... @@ -47,7 +47,7 @@
47 47  )))
48 48  
49 49  (((
50 -The LoRa wireless technology used in LDDS20 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
48 +LDDS75 is powered by (% style="color:#4472c4" %)** 4000mA or 8500mAh Li-SOCI2 battery**(%%); It is designed for long term use up to 10 years*.
51 51  )))
52 52  
53 53  (((
... ... @@ -55,7 +55,7 @@
55 55  )))
56 56  
57 57  (((
58 -LDDS20 is powered by (% style="color:#4472c4" %)**8500mA Li-SOCI2 battery**(%%); It is designed for long term use up to 10 years*.
56 +Each LDDS75 pre-loads with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect if there is network coverage, after power on.
59 59  )))
60 60  
61 61  (((
... ... @@ -63,24 +63,13 @@
63 63  )))
64 64  
65 65  (((
66 -Each LDDS20 pre-loads with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect if there is network coverage, after power on.
67 -)))
68 -
69 -(((
70 -
71 -)))
72 -)))
73 -
74 -(((
75 -(((
76 76  (% style="color:#4472c4" %) * (%%)Actually lifetime depends on network coverage and uplink interval and other factors.
77 77  )))
78 78  )))
79 79  )))
80 -)))
81 81  
82 82  
83 -[[image:1655255122126-327.png]]
70 +[[image:1654847051249-359.png]]
84 84  
85 85  
86 86  
... ... @@ -88,10 +88,9 @@
88 88  
89 89  * LoRaWAN 1.0.3 Class A
90 90  * Ultra low power consumption
91 -* Liquid Level Measurement by Ultrasonic technology
92 -* Measure through container, No need to contact Liquid.
93 -* Valid level range 20mm - 2000mm
94 -* Accuracy: ±(5mm+S*0.5%) (S: Measure Value)
78 +* Distance Detection by Ultrasonic technology
79 +* Flat object range 280mm - 7500mm
80 +* Accuracy: ±(1cm+S*0.3%) (S: Distance)
95 95  * Cable Length : 25cm
96 96  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
97 97  * AT Commands to change parameters
... ... @@ -98,130 +98,69 @@
98 98  * Uplink on periodically
99 99  * Downlink to change configure
100 100  * IP66 Waterproof Enclosure
101 -* 8500mAh Battery for long term use
87 +* 4000mAh or 8500mAh Battery for long term use
102 102  
103 -== 1.3  Suitable Container & Liquid ==
89 +== 1.3  Specification ==
104 104  
105 -* Solid Wall container such as: steel, iron, glass, ceramics, non-foaming plastics etc.
106 -* Container shape is regular, and surface is smooth.
107 -* Container Thickness:
108 -** Pure metal material.  2~~8mm, best is 3~~5mm
109 -** Pure non metal material: <10 mm
110 -* Pure liquid without irregular deposition.
91 +=== 1.3.1  Rated environmental conditions ===
111 111  
112 -== 1.4  Mechanical ==
93 +[[image:image-20220610154839-1.png]]
113 113  
114 -[[image:image-20220615090910-1.png]]
95 +(((
96 +**Remarks: (1) a. When the ambient temperature is 0-39 ℃, the maximum humidity is 90% (non-condensing);  b. When the ambient temperature is 40-50 ℃, the highest humidity is the highest humidity in the natural world at the current temperature (no condensation)**
97 +)))
115 115  
116 116  
117 -[[image:image-20220615090910-2.png]]
118 118  
101 +=== 1.3.2  Effective measurement range Reference beam pattern ===
119 119  
103 +**(1) The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.**
120 120  
121 -== 1.5  Install LDDS20 ==
122 122  
123 123  
124 -(% style="color:blue" %)**Step 1**(%%):  Choose the installation point.
107 +[[image:1654852253176-749.png]]
125 125  
126 -LDDS20 (% style="color:red" %)**MUST**(%%) be installed on the container bottom middle position.
127 127  
128 -[[image:image-20220615091045-3.png]]
129 129  
111 +(((
112 +**(2)** **The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.**
113 +)))
130 130  
131 131  
132 -(% style="color:blue" %)**Step 2**(%%):  Polish the installation point.
116 +[[image:1654852175653-550.png]](% style="display:none" %) ** **
133 133  
134 -For Metal Surface with paint, it is important to polish the surface, first use crude sand paper to polish the paint level , then use exquisite sand paper to polish the metal level to make it shine & smooth.
135 135  
136 -[[image:image-20220615092010-11.png]]
137 137  
120 +== 1.5 ​ Applications ==
138 138  
139 -No polish needed if the container is shine metal surface without paint or non-metal container.
122 +* Horizontal distance measurement
123 +* Liquid level measurement
124 +* Parking management system
125 +* Object proximity and presence detection
126 +* Intelligent trash can management system
127 +* Robot obstacle avoidance
128 +* Automatic control
129 +* Sewer
130 +* Bottom water level monitoring
140 140  
141 -[[image:image-20220615092044-12.png]]
142 142  
133 +== 1.6  Pin mapping and power on ==
143 143  
144 144  
145 -(% style="color:blue" %)**Step3:   **(%%)Test the installation point.
136 +[[image:1654847583902-256.png]]
146 146  
147 -Power on LDDS75, check if the blue LED is on, If the blue LED is on, means the sensor works. Then put ultrasonic coupling paste on the sensor and put it tightly on the installation point.
148 148  
149 149  
150 -It is necessary to put the coupling paste between the sensor and the container, otherwise LDDS20 won’t detect the liquid level.
140 += 2.  Configure LDDS75 to connect to LoRaWAN network =
151 151  
152 -[[image:1655256160324-178.png]][[image:image-20220615092327-13.png]]
153 -
154 -
155 -After paste the LDDS20 well, power on LDDS20. In the first 30 seconds of booting, device will check the sensors status and BLUE LED will show the status as below. After 30 seconds, BLUE LED will be off to save battery life.
156 -
157 -
158 -(% style="color:red" %)**LED Status:**
159 -
160 -* Onboard LED: When power on device, the onboard LED will fast blink 4 times which means detect the sensor well.
161 -
162 -* (% style="color:blue" %)BLUE LED(% style="color:red" %) always ON(%%): Sensor is power on but doesn’t detect liquid. There is problem in installation point.
163 -* (% style="color:blue" %)BLUE LED(% style="color:red" %) slowly blinking(%%): Sensor detects Liquid Level, The installation point is good.
164 -
165 -LDDS20 will enter into low power mode at 30 seconds after system reset or power on, Blue LED will be off after that.
166 -
167 -
168 -(% style="color:red" %)**Note 2:**
169 -
170 -(% style="color:red" %)Ultrasonic coupling paste (%%) is subjected in most shipping way. So the default package doesn’t include it and user needs to purchase locally.
171 -
172 -
173 -
174 -(% style="color:blue" %)**Step4:   **(%%)Install use Epoxy ab glue.
175 -
176 -Prepare Eproxy AB glue.
177 -
178 -Put Eproxy AB glue in the sensor and press it hard on the container installation point.
179 -
180 -Reset LDDS20 and see if the BLUE LED is slowly blinking.
181 -
182 -[[image:image-20220615091045-8.png||height="226" width="380"]] [[image:image-20220615091045-9.png||height="239" width="339"]]
183 -
184 -
185 -(% style="color:red" %)**Note 1:**
186 -
187 -Eproxy AB glue needs 3~~ 5 minutes to stable attached. we can use other glue material to keep it in the position.
188 -
189 -
190 -(% style="color:red" %)**Note 2:**
191 -
192 -(% style="color:red" %)Eproxy AB glue(%%) is subjected in most shipping way. So the default package doesn’t include it and user needs to purchase locally.
193 -
194 -
195 -
196 -== 1.6 ​ Applications ==
197 -
198 -* Smart liquid control solution.
199 -* Smart liquefied gas solution.
200 -
201 -== 1.7  Precautions ==
202 -
203 -* At room temperature, containers of different materials, such as steel, glass, iron, ceramics, non-foamed plastics and other dense materials, have different detection blind areas and detection limit heights.
204 -* For containers of the same material at room temperature, the detection blind zone and detection limit height are also different for the thickness of the container.
205 -* When the detected liquid level exceeds the effective detection value of the sensor, and the liquid level of the liquid to be measured shakes or tilts, the detected liquid height is unstable.
206 -
207 -== 1.8  Pin mapping and power on ==
208 -
209 -
210 -[[image:1655257026882-201.png]]
211 -
212 -
213 -
214 -= 2.  Configure LDDS20 to connect to LoRaWAN network =
215 -
216 -
217 217  == 2.1  How it works ==
218 218  
219 219  (((
220 -The LDDS20 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LDDS20. If there is coverage of the LoRaWAN network, it will automatically join the network via OTAA and start to send the sensor value.
145 +The LDDS75 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LDDS75. If there is coverage of the LoRaWAN network, it will automatically join the network via OTAA and start to send the sensor value
221 221  )))
222 222  
223 223  (((
224 -In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.A0UsingtheATCommands"]]to set the keys in the LDDS20.
149 +In case you can't set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.A0ConfigureLDDS75viaATCommandorLoRaWANDownlink"]]to set the keys in the LDDS75.
225 225  )))
226 226  
227 227  
... ... @@ -233,7 +233,7 @@
233 233  )))
234 234  
235 235  (((
236 -[[image:1655257698953-697.png]]
161 +[[image:1654848616367-242.png]]
237 237  )))
238 238  
239 239  (((
... ... @@ -241,13 +241,11 @@
241 241  )))
242 242  
243 243  (((
244 -
245 -
246 -(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LDDS20.
169 +(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LDDS75.
247 247  )))
248 248  
249 249  (((
250 -Each LDDS20 is shipped with a sticker with the default device keys, user can find this sticker in the box. it looks like below.
173 +Each LDDS75 is shipped with a sticker with the default device keys, user can find this sticker in the box. it looks like below.
251 251  )))
252 252  
253 253  [[image:image-20220607170145-1.jpeg]]
... ... @@ -262,8 +262,6 @@
262 262  )))
263 263  
264 264  (((
265 -
266 -
267 267  **Add APP EUI in the application**
268 268  )))
269 269  
... ... @@ -277,7 +277,6 @@
277 277  [[image:image-20220610161353-7.png]]
278 278  
279 279  
280 -
281 281  You can also choose to create the device manually.
282 282  
283 283   [[image:image-20220610161538-8.png]]
... ... @@ -290,17 +290,16 @@
290 290  
291 291  
292 292  
293 -(% style="color:blue" %)**Step 2**(%%):  Power on LDDS20
213 +(% style="color:blue" %)**Step 2**(%%): Power on LDDS75
294 294  
295 295  
296 296  Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).
297 297  
298 -[[image:image-20220615095102-14.png]]
218 +[[image:image-20220610161724-10.png]]
299 299  
300 300  
301 -
302 302  (((
303 -(% style="color:blue" %)**Step 3**(%%)**:**  The LDDS20 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
222 +(% style="color:blue" %)**Step 3**(%%)**:** The LDDS75 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
304 304  )))
305 305  
306 306  [[image:1654849068701-275.png]]
... ... @@ -311,10 +311,12 @@
311 311  
312 312  (((
313 313  (((
314 -LDDS20 will uplink payload via LoRaWAN with below payload format: 
233 +LDDS75 will uplink payload via LoRaWAN with below payload format: 
234 +)))
315 315  
316 -Uplink payload includes in total 8 bytes.
317 -Payload for firmware version v1.1.4. . Before v1.1.3, there is only 5 bytes: BAT and Distance(Please check manual v1.2.0 if you have 5 bytes payload).
236 +(((
237 +Uplink payload includes in total 4 bytes.
238 +Payload for firmware version v1.1.4. . Before v1.1.3, there is on two fields: BAT and Distance
318 318  )))
319 319  )))
320 320  
... ... @@ -341,7 +341,7 @@
341 341  === 2.3.1  Battery Info ===
342 342  
343 343  
344 -Check the battery voltage for LDDS20.
265 +Check the battery voltage for LDDS75.
345 345  
346 346  Ex1: 0x0B45 = 2885mV
347 347  
... ... @@ -352,19 +352,22 @@
352 352  === 2.3.2  Distance ===
353 353  
354 354  (((
355 -Get the distance. Flat object range 20mm - 2000mm.
276 +Get the distance. Flat object range 280mm - 7500mm.
356 356  )))
357 357  
358 358  (((
359 -For example, if the data you get from the register is __0x06 0x05__, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** 0605(H) = 1541 (D) = 1541 mm.**
280 +For example, if the data you get from the register is 0x0B 0x05, the distance between the sensor and the measured object is(% style="color:#4472c4" %)** 0B05(H) = 2821 (D) = 2821 mm.**
360 360  )))
361 361  
362 -* If the sensor value is 0x0000, it means system doesn't detect ultrasonic sensor.
363 -* If the sensor value lower than 0x0014 (20mm), the sensor value will be invalid.
364 364  
284 +* If the sensor value is 0x0000, it means system doesn’t detect ultrasonic sensor.
285 +* If the sensor value lower than 0x0118 (280mm), the sensor value will be invalid. Since v1.1.4, all value lower than 280mm will be set to 0x0014(20mm) which means the value is invalid.
286 +
287 +
288 +
365 365  === 2.3.3  Interrupt Pin ===
366 366  
367 -This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2A0SetInterruptMode"]] for the hardware and software set up.
291 +This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.3A0SetInterruptMode"]] for the hardware and software set up.
368 368  
369 369  **Example:**
370 370  
... ... @@ -410,109 +410,543 @@
410 410  The payload decoder function for TTN V3 is here:
411 411  
412 412  (((
413 -LDDS20 TTN V3 Payload Decoder: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDDS20/Payload_Decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/]]
337 +LDDS75 TTN V3 Payload Decoder: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDDS75/Payload_Decoder/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Payload_Decoder/]]
414 414  )))
415 415  
416 416  
417 417  
418 -== 2.4  Downlink Payload ==
342 +== 2.4  Uplink Interval ==
419 419  
420 -By default, LDDS20 prints the downlink payload to console port.
344 +The LDDS75 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
421 421  
422 -[[image:image-20220615100930-15.png]]
423 423  
424 424  
425 -**Examples:**
348 +== 2.5  ​Show Data in DataCake IoT Server ==
426 426  
350 +(((
351 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
352 +)))
427 427  
428 -* (% style="color:blue" %)**Set TDC**
354 +(((
355 +
356 +)))
429 429  
430 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
358 +(((
359 +(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
360 +)))
431 431  
432 -Payload:    01 00 00 1E    TDC=30S
362 +(((
363 +(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
364 +)))
433 433  
434 -Payload:    01 00 00 3C    TDC=60S
435 435  
367 +[[image:1654592790040-760.png]]
436 436  
437 -* (% style="color:blue" %)**Reset**
438 438  
439 -If payload = 0x04FF, it will reset the LDDS20
370 +[[image:1654592800389-571.png]]
440 440  
441 441  
442 -* (% style="color:blue" %)**CFM**
373 +(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
443 443  
444 -Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
375 +(% style="color:blue" %)**Step 4**(%%)**: Search the LDDS75 and add DevEUI.**
445 445  
377 +[[image:1654851029373-510.png]]
446 446  
447 447  
448 -== 2.5  ​Show Data in DataCake IoT Server ==
380 +After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
449 449  
382 +[[image:image-20220610165129-11.png||height="595" width="1088"]]
383 +
384 +
385 +
386 +== 2.6  Frequency Plans ==
387 +
450 450  (((
451 -[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
389 +The LDDS75 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
452 452  )))
453 453  
392 +
393 +
394 +=== 2.6.1  EU863-870 (EU868) ===
395 +
454 454  (((
397 +(% style="color:blue" %)**Uplink:**
398 +)))
399 +
400 +(((
401 +868.1 - SF7BW125 to SF12BW125
402 +)))
403 +
404 +(((
405 +868.3 - SF7BW125 to SF12BW125 and SF7BW250
406 +)))
407 +
408 +(((
409 +868.5 - SF7BW125 to SF12BW125
410 +)))
411 +
412 +(((
413 +867.1 - SF7BW125 to SF12BW125
414 +)))
415 +
416 +(((
417 +867.3 - SF7BW125 to SF12BW125
418 +)))
419 +
420 +(((
421 +867.5 - SF7BW125 to SF12BW125
422 +)))
423 +
424 +(((
425 +867.7 - SF7BW125 to SF12BW125
426 +)))
427 +
428 +(((
429 +867.9 - SF7BW125 to SF12BW125
430 +)))
431 +
432 +(((
433 +868.8 - FSK
434 +)))
435 +
436 +(((
455 455  
456 456  )))
457 457  
458 458  (((
459 -(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
441 +(% style="color:blue" %)**Downlink:**
460 460  )))
461 461  
462 462  (((
463 -(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
445 +Uplink channels 1-9 (RX1)
464 464  )))
465 465  
448 +(((
449 +869.525 - SF9BW125 (RX2 downlink only)
450 +)))
466 466  
467 -[[image:1654592790040-760.png]]
468 468  
469 469  
470 -[[image:1654592800389-571.png]]
454 +=== 2.6.2  US902-928(US915) ===
471 471  
456 +(((
457 +Used in USA, Canada and South America. Default use CHE=2
472 472  
473 -(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
459 +(% style="color:blue" %)**Uplink:**
474 474  
475 -(% style="color:blue" %)**Step 4**(%%)**: Search the LDDS75 and add DevEUI.(% style="color:red" %)(Note: LDDS20 use same payload as LDDS75)(%%)**
461 +903.9 - SF7BW125 to SF10BW125
476 476  
477 -[[image:1654851029373-510.png]]
463 +904.1 - SF7BW125 to SF10BW125
478 478  
465 +904.3 - SF7BW125 to SF10BW125
479 479  
480 -After added, the sensor data arrive TTN V3, it will also arrive and show in Datacake.
467 +904.5 - SF7BW125 to SF10BW125
481 481  
482 -[[image:image-20220610165129-11.png||height="595" width="1088"]]
469 +904.7 - SF7BW125 to SF10BW125
483 483  
471 +904.9 - SF7BW125 to SF10BW125
484 484  
473 +905.1 - SF7BW125 to SF10BW125
485 485  
486 -== 2.6  LED Indicator ==
475 +905.3 - SF7BW125 to SF10BW125
487 487  
488 -The LDDS20 has an internal LED which is to show the status of different state.
489 489  
478 +(% style="color:blue" %)**Downlink:**
490 490  
491 -* Blink once when device power on.
492 -* The device detects the sensor and flashes 5 times.
493 -* Solid ON for 5 seconds once device successful Join the network.
480 +923.3 - SF7BW500 to SF12BW500
494 494  
495 -Blink once when device transmit a packet.
482 +923.9 - SF7BW500 to SF12BW500
496 496  
484 +924.5 - SF7BW500 to SF12BW500
497 497  
486 +925.1 - SF7BW500 to SF12BW500
498 498  
499 -== 2.8  ​Firmware Change Log ==
488 +925.7 - SF7BW500 to SF12BW500
500 500  
490 +926.3 - SF7BW500 to SF12BW500
501 501  
492 +926.9 - SF7BW500 to SF12BW500
493 +
494 +927.5 - SF7BW500 to SF12BW500
495 +
496 +923.3 - SF12BW500(RX2 downlink only)
497 +
498 +
499 +
500 +)))
501 +
502 +=== 2.6.3  CN470-510 (CN470) ===
503 +
502 502  (((
503 -**Firmware download link: **[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
505 +Used in China, Default use CHE=1
504 504  )))
505 505  
506 506  (((
509 +(% style="color:blue" %)**Uplink:**
510 +)))
511 +
512 +(((
513 +486.3 - SF7BW125 to SF12BW125
514 +)))
515 +
516 +(((
517 +486.5 - SF7BW125 to SF12BW125
518 +)))
519 +
520 +(((
521 +486.7 - SF7BW125 to SF12BW125
522 +)))
523 +
524 +(((
525 +486.9 - SF7BW125 to SF12BW125
526 +)))
527 +
528 +(((
529 +487.1 - SF7BW125 to SF12BW125
530 +)))
531 +
532 +(((
533 +487.3 - SF7BW125 to SF12BW125
534 +)))
535 +
536 +(((
537 +487.5 - SF7BW125 to SF12BW125
538 +)))
539 +
540 +(((
541 +487.7 - SF7BW125 to SF12BW125
542 +)))
543 +
544 +(((
507 507  
508 508  )))
509 509  
510 510  (((
511 -**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
549 +(% style="color:blue" %)**Downlink:**
512 512  )))
513 513  
552 +(((
553 +506.7 - SF7BW125 to SF12BW125
554 +)))
514 514  
556 +(((
557 +506.9 - SF7BW125 to SF12BW125
558 +)))
515 515  
560 +(((
561 +507.1 - SF7BW125 to SF12BW125
562 +)))
563 +
564 +(((
565 +507.3 - SF7BW125 to SF12BW125
566 +)))
567 +
568 +(((
569 +507.5 - SF7BW125 to SF12BW125
570 +)))
571 +
572 +(((
573 +507.7 - SF7BW125 to SF12BW125
574 +)))
575 +
576 +(((
577 +507.9 - SF7BW125 to SF12BW125
578 +)))
579 +
580 +(((
581 +508.1 - SF7BW125 to SF12BW125
582 +)))
583 +
584 +(((
585 +505.3 - SF12BW125 (RX2 downlink only)
586 +)))
587 +
588 +
589 +
590 +=== 2.6.4  AU915-928(AU915) ===
591 +
592 +(((
593 +Default use CHE=2
594 +
595 +(% style="color:blue" %)**Uplink:**
596 +
597 +916.8 - SF7BW125 to SF12BW125
598 +
599 +917.0 - SF7BW125 to SF12BW125
600 +
601 +917.2 - SF7BW125 to SF12BW125
602 +
603 +917.4 - SF7BW125 to SF12BW125
604 +
605 +917.6 - SF7BW125 to SF12BW125
606 +
607 +917.8 - SF7BW125 to SF12BW125
608 +
609 +918.0 - SF7BW125 to SF12BW125
610 +
611 +918.2 - SF7BW125 to SF12BW125
612 +
613 +
614 +(% style="color:blue" %)**Downlink:**
615 +
616 +923.3 - SF7BW500 to SF12BW500
617 +
618 +923.9 - SF7BW500 to SF12BW500
619 +
620 +924.5 - SF7BW500 to SF12BW500
621 +
622 +925.1 - SF7BW500 to SF12BW500
623 +
624 +925.7 - SF7BW500 to SF12BW500
625 +
626 +926.3 - SF7BW500 to SF12BW500
627 +
628 +926.9 - SF7BW500 to SF12BW500
629 +
630 +927.5 - SF7BW500 to SF12BW500
631 +
632 +923.3 - SF12BW500(RX2 downlink only)
633 +
634 +
635 +
636 +)))
637 +
638 +=== 2.6.5  AS920-923 & AS923-925 (AS923) ===
639 +
640 +(((
641 +(% style="color:blue" %)**Default Uplink channel:**
642 +)))
643 +
644 +(((
645 +923.2 - SF7BW125 to SF10BW125
646 +)))
647 +
648 +(((
649 +923.4 - SF7BW125 to SF10BW125
650 +)))
651 +
652 +(((
653 +
654 +)))
655 +
656 +(((
657 +(% style="color:blue" %)**Additional Uplink Channel**:
658 +)))
659 +
660 +(((
661 +(OTAA mode, channel added by JoinAccept message)
662 +)))
663 +
664 +(((
665 +
666 +)))
667 +
668 +(((
669 +(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
670 +)))
671 +
672 +(((
673 +922.2 - SF7BW125 to SF10BW125
674 +)))
675 +
676 +(((
677 +922.4 - SF7BW125 to SF10BW125
678 +)))
679 +
680 +(((
681 +922.6 - SF7BW125 to SF10BW125
682 +)))
683 +
684 +(((
685 +922.8 - SF7BW125 to SF10BW125
686 +)))
687 +
688 +(((
689 +923.0 - SF7BW125 to SF10BW125
690 +)))
691 +
692 +(((
693 +922.0 - SF7BW125 to SF10BW125
694 +)))
695 +
696 +(((
697 +
698 +)))
699 +
700 +(((
701 +(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
702 +)))
703 +
704 +(((
705 +923.6 - SF7BW125 to SF10BW125
706 +)))
707 +
708 +(((
709 +923.8 - SF7BW125 to SF10BW125
710 +)))
711 +
712 +(((
713 +924.0 - SF7BW125 to SF10BW125
714 +)))
715 +
716 +(((
717 +924.2 - SF7BW125 to SF10BW125
718 +)))
719 +
720 +(((
721 +924.4 - SF7BW125 to SF10BW125
722 +)))
723 +
724 +(((
725 +924.6 - SF7BW125 to SF10BW125
726 +)))
727 +
728 +(((
729 +
730 +)))
731 +
732 +(((
733 +(% style="color:blue" %)**Downlink:**
734 +)))
735 +
736 +(((
737 +Uplink channels 1-8 (RX1)
738 +)))
739 +
740 +(((
741 +923.2 - SF10BW125 (RX2)
742 +)))
743 +
744 +
745 +
746 +=== 2.6.6  KR920-923 (KR920) ===
747 +
748 +(((
749 +(% style="color:blue" %)**Default channel:**
750 +)))
751 +
752 +(((
753 +922.1 - SF7BW125 to SF12BW125
754 +)))
755 +
756 +(((
757 +922.3 - SF7BW125 to SF12BW125
758 +)))
759 +
760 +(((
761 +922.5 - SF7BW125 to SF12BW125
762 +)))
763 +
764 +(((
765 +
766 +)))
767 +
768 +(((
769 +(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
770 +)))
771 +
772 +(((
773 +922.1 - SF7BW125 to SF12BW125
774 +)))
775 +
776 +(((
777 +922.3 - SF7BW125 to SF12BW125
778 +)))
779 +
780 +(((
781 +922.5 - SF7BW125 to SF12BW125
782 +)))
783 +
784 +(((
785 +922.7 - SF7BW125 to SF12BW125
786 +)))
787 +
788 +(((
789 +922.9 - SF7BW125 to SF12BW125
790 +)))
791 +
792 +(((
793 +923.1 - SF7BW125 to SF12BW125
794 +)))
795 +
796 +(((
797 +923.3 - SF7BW125 to SF12BW125
798 +)))
799 +
800 +(((
801 +
802 +)))
803 +
804 +(((
805 +(% style="color:blue" %)**Downlink:**
806 +)))
807 +
808 +(((
809 +Uplink channels 1-7(RX1)
810 +)))
811 +
812 +(((
813 +921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
814 +)))
815 +
816 +
817 +
818 +=== 2.6.7  IN865-867 (IN865) ===
819 +
820 +(((
821 +(% style="color:blue" %)**Uplink:**
822 +)))
823 +
824 +(((
825 +865.0625 - SF7BW125 to SF12BW125
826 +)))
827 +
828 +(((
829 +865.4025 - SF7BW125 to SF12BW125
830 +)))
831 +
832 +(((
833 +865.9850 - SF7BW125 to SF12BW125
834 +)))
835 +
836 +(((
837 +
838 +)))
839 +
840 +(((
841 +(% style="color:blue" %)**Downlink:**
842 +)))
843 +
844 +(((
845 +Uplink channels 1-3 (RX1)
846 +)))
847 +
848 +(((
849 +866.550 - SF10BW125 (RX2)
850 +)))
851 +
852 +
853 +
854 +== 2.7  LED Indicator ==
855 +
856 +The LDDS75 has an internal LED which is to show the status of different state.
857 +
858 +
859 +* Blink once when device power on.
860 +* The device detects the sensor and flashes 5 times.
861 +* Solid ON for 5 seconds once device successful Join the network.
862 +* Blink once when device transmit a packet.
863 +
864 +== 2.8  ​Firmware Change Log ==
865 +
866 +
867 +**Firmware download link: **[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
868 +
869 +
870 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
871 +
872 +
873 +
516 516  == 2.9  Mechanical ==
517 517  
518 518  
... ... @@ -653,9 +653,7 @@
653 653  [[image:image-20220610172924-5.png]]
654 654  
655 655  
656 -(((
657 657  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LDDS75. LDDS75 will output system info once power on as below:
658 -)))
659 659  
660 660  
661 661   [[image:image-20220610172924-6.png||height="601" width="860"]]
... ... @@ -679,19 +679,16 @@
679 679  (((
680 680  Format: Command Code (0x01) followed by 3 bytes time value.
681 681  
682 -(((
683 683  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
684 -)))
685 685  
686 686  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
687 687  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
688 688  )))
689 -)))
690 690  
691 691  
1045 +
1046 +)))
692 692  
693 -
694 -
695 695  == 3.3  Set Interrupt Mode ==
696 696  
697 697  Feature, Set Interrupt mode for GPIO_EXIT.
... ... @@ -705,9 +705,7 @@
705 705  
706 706  Format: Command Code (0x06) followed by 3 bytes.
707 707  
708 -(((
709 709  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
710 -)))
711 711  
712 712  * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
713 713  * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1655254599445-662.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -117.0 KB
Content
1655255122126-327.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
1655256160324-178.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -177.0 KB
Content
1655257026882-201.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1655257698953-697.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -101.7 KB
Content
image-20220615090910-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.3 KB
Content
image-20220615090910-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.7 KB
Content
image-20220615091045-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -209.8 KB
Content
image-20220615091045-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.9 KB
Content
image-20220615091045-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -111.5 KB
Content
image-20220615091045-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -196.0 KB
Content
image-20220615091045-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -371.1 KB
Content
image-20220615091045-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -206.3 KB
Content
image-20220615091045-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -115.0 KB
Content
image-20220615091929-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.7 KB
Content
image-20220615092010-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -37.3 KB
Content
image-20220615092044-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -63.5 KB
Content
image-20220615092327-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -66.3 KB
Content
image-20220615095102-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.0 KB
Content
image-20220615100930-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -10.5 KB
Content