Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 3 added, 0 removed)
  • image-20220610172924-4.png
  • image-20220610172924-5.png
  • image-20220610172924-6.png

Details

Page properties

Content

...	...	@@ -854,70 +854,27 @@
854	854	[[image:image-20220610172400-3.png]]
855	855
856	856
857		-= 3.  LiDAR ToF Measurement =
858	858
859		-== 3.1 Principle of Distance Measurement ==
	858	+=== 2.10.2  Replace the battery ===
860	860
861		-The LiDAR probe is based on TOF, namely, Time of Flight principle. To be specific, the product emits modulation wave of near infrared ray on a periodic basis, which will be reflected after contacting object. The product obtains the time of flight by measuring round-trip phase difference and then calculates relative range between the product and the detection object, as shown below.
862		-
863		-[[image:1654831757579-263.png]]
864		-
865		-
866		-
867		-== 3.2 Distance Measurement Characteristics ==
868		-
869		-With optimization of light path and algorithm, The LiDAR probe has minimized influence from external environment on distance measurement performance. Despite that, the range of distance measurement may still be affected by the environment illumination intensity and the reflectivity of detection object. As shown in below:
870		-
871		-[[image:1654831774373-275.png]]
872		-
873		-
874	874	(((
875		-(% style="color:blue" %)**① **(%%)Represents the detection blind zone of The LiDAR probe, 0-10cm, within which the output data is unreliable.
	861	+You can change the battery in the LDDS75.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
876	876	)))
877	877
878	878	(((
879		-(% style="color:blue" %)**② **(%%)Represents the operating range of The LiDAR probe detecting black target with 10% reflectivity, 0.1-5m.
	865	+
880	880	)))
881	881
882	882	(((
883		-(% style="color:blue" %)**③ **(%%)Represents the operating range of The LiDAR probe detecting white target with 90% reflectivity, 0.1-12m.
	869	+The default battery pack of LDDS75 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
884	884	)))
885	885
886	886
887		-(((
888		-Vertical Coordinates: Represents the radius of light spot for The LiDAR probe at the different distances. The diameter of light spot depends on the FOV of The LiDAR probe (the term of FOV generally refers to the smaller value between the receiving angle and the transmitting angle), which is calculated as follows:
889		-)))
890	890
	874	+= 3.  Configure LLDS12 via AT Command or LoRaWAN Downlink =
891	891
892		-[[image:1654831797521-720.png]]
893		-
894		-
895	895	(((
896		-In the formula above, d is the diameter of light spot; D is detecting range; β is the value of the receiving angle of The LiDAR probe, 3.6°. Correspondence between the diameter of light spot and detecting range is given in Table below.
897		-)))
898		-
899		-[[image:1654831810009-716.png]]
900		-
901		-
902	902	(((
903		-If the light spot reaches two objects with different distances, as shown in Figure 3, the output distance value will be a value between the actual distance values of the two objects. For a high accuracy requirement in practice, the above situation should be noticed to avoid the measurement error.
904		-)))
905		-
906		-
907		-
908		-== 3.3 Notice of usage: ==
909		-
910		-Possible invalid /wrong reading for LiDAR ToF tech:
911		-
912		-* Measure high reflectivity object such as: Mirror, Smooth ceramic tile, static milk surface, will have possible wrong readings.
913		-* While there is transparent object such as glass, water drop between the measured object and the LiDAR sensor, the reading might wrong.
914		-* The LiDAR probe is cover by dirty things; the reading might be wrong. In this case, need to clean the probe.
915		-* The sensor window is made by Acrylic. Don’t touch it with alcohol material. This will destroy the sensor window.
916		-
917		-= 4.  Configure LLDS12 via AT Command or LoRaWAN Downlink =
918		-
919		-(((
920		-(((
921	921	Use can configure LLDS12 via AT Command or LoRaWAN Downlink.
922	922	)))
923	923	)))

image-20220610172924-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.5 MB

Content

image-20220610172924-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+901.4 KB

Content

image-20220610172924-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+68.6 KB

Content