Skip to Content
Last modified by Xiaoling on 2025/04/27 11:48
From version 48.1
edited by Xiaoling
on 2022/06/07 17:05
Change comment: Uploaded new attachment "1654592721645-318.png", version {1}
To version 78.2
edited by Xiaoling
on 2022/06/07 18:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -63,26 +63,29 @@
63 63  
64 64  
65 65  
66 -
67 -
68 -
69 -
70 -
71 -
72 -
73 73  = 1. Introduction =
74 74  
75 75  == 1.1 ​What is LoRaWAN Soil pH Sensor ==
76 76  
70 +(((
77 77  The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
72 +)))
78 78  
74 +(((
79 79  LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.
76 +)))
80 80  
78 +(((
81 81  The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
80 +)))
82 82  
82 +(((
83 83  LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
84 +)))
84 84  
86 +(((
85 85  Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
88 +)))
86 86  
87 87  
88 88  [[image:1654592435432-887.png]]
... ... @@ -105,7 +105,6 @@
105 105  * IP68 rate for the Sensor Probe
106 106  * 8500mAh Battery for long term use
107 107  
108 -
109 109  == 1.3 Probe Specification ==
110 110  
111 111  
... ... @@ -126,12 +126,10 @@
126 126  * IP68 Protection
127 127  * Length: 3.5 meters
128 128  
129 -
130 130  == 1.4 ​Applications ==
131 131  
132 132  * Smart Agriculture
133 133  
134 -
135 135  == 1.5 Pin mapping and power on ==
136 136  
137 137  [[image:1654592472094-134.png]]
... ... @@ -210,18 +210,27 @@
210 210  [[image:image-20220607170442-2.png]]
211 211  
212 212  
213 +(((
213 213  (% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
215 +)))
214 214  
217 +[[image:1654592697690-910.png]]
215 215  
216 216  
217 217  
218 218  == 2.3 ​Uplink Payload ==
219 219  
223 +(((
220 220  LSPH01 will uplink payload via LoRaWAN with below payload format: 
225 +)))
221 221  
227 +(((
222 222  Uplink payload includes in total 11 bytes.
229 +)))
223 223  
231 +(((
224 224  Normal uplink payload:
233 +)))
225 225  
226 226  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
227 227  |(((
... ... @@ -239,7 +239,7 @@
239 239  [[Message Type>>path:#H2.3.6MessageType]]
240 240  )))
241 241  
242 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654581735133-458.png?rev=1.1||alt="1654581735133-458.png"]]
251 +[[image:1654592721645-318.png]]
243 243  
244 244  
245 245  
... ... @@ -305,13 +305,17 @@
305 305  
306 306  === 2.3.6 Message Type ===
307 307  
317 +(((
308 308  For a normal uplink payload, the message type is always 0x01.
319 +)))
309 309  
321 +(((
310 310  Valid Message Type:
323 +)))
311 311  
312 312  
313 313  (% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
314 -|**Message Type Code**|**Description**|**Payload**
327 +|=**Message Type Code**|=**Description**|=**Payload**
315 315  |0x01|Normal Uplink|[[Normal Uplink Payload>>path:#H2.3200BUplinkPayload]]
316 316  |0x02|Reply configures info|[[Configure Info Payload>>path:#H3.4GetFirmwareVersionInfo]]
317 317  |0x03|Reply Calibration Info|[[Calibration Payload>>path:#H2.7Calibration]]
... ... @@ -321,7 +321,7 @@
321 321  While using TTN network, you can add the payload format to decode the payload.
322 322  
323 323  
324 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654582541848-906.png?rev=1.1||alt="1654582541848-906.png"]]
337 +[[image:1654592762713-715.png]]
325 325  
326 326  (((
327 327  The payload decoder function for TTN is here:
... ... @@ -341,18 +341,27 @@
341 341  
342 342  == 2.5 ​Show Data in DataCake IoT Server ==
343 343  
357 +(((
344 344  [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
359 +)))
345 345  
361 +(((
362 +
363 +)))
346 346  
365 +(((
347 347  (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**
367 +)))
348 348  
369 +(((
349 349  (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**
371 +)))
350 350  
351 351  
352 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583683416-869.png?rev=1.1||alt="1654583683416-869.png"]]
374 +[[image:1654592790040-760.png]]
353 353  
354 354  
355 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583694084-878.png?rev=1.1||alt="1654583694084-878.png"]]
377 +[[image:1654592800389-571.png]]
356 356  
357 357  
358 358  (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**
... ... @@ -359,33 +359,37 @@
359 359  
360 360  (% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**
361 361  
362 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583711590-413.png?rev=1.1||alt="1654583711590-413.png"]]
384 +[[image:1654592819047-535.png]]
363 363  
364 364  
365 365  
366 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583732798-193.png?rev=1.1||alt="1654583732798-193.png"]]
388 +[[image:1654592833877-762.png]]
367 367  
368 368  
369 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583749683-259.png?rev=1.1||alt="1654583749683-259.png"]]
391 +[[image:1654592856403-259.png]]
370 370  
371 371  
394 +(((
372 372  (% style="color:blue" %)**Step 5**(%%)**: add payload decode**
396 +)))
373 373  
398 +(((
374 374  Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]
400 +)))
375 375  
376 376  
377 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583770974-935.png?rev=1.1||alt="1654583770974-935.png"]]
403 +[[image:1654592878525-845.png]]
378 378  
379 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583781517-146.png?rev=1.1||alt="1654583781517-146.png"]]
405 +[[image:1654592892967-474.png]]
380 380  
381 381  
382 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583791351-557.png?rev=1.1||alt="1654583791351-557.png"]]
408 +[[image:1654592905354-123.png]]
383 383  
384 384  
385 385  After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
386 386  
387 387  
388 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654583805491-713.png?rev=1.1||alt="1654583805491-713.png"]]
414 +[[image:1654592917530-261.png]]
389 389  
390 390  
391 391  
... ... @@ -394,8 +394,10 @@
394 394  === 2.6.1 Before measurement ===
395 395  
396 396  (((
423 +(((
397 397  If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy. 
398 398  )))
426 +)))
399 399  
400 400  
401 401  
... ... @@ -402,24 +402,45 @@
402 402  === 2.6.2 Measurement ===
403 403  
404 404  
433 +(((
405 405  (% style="color:#4f81bd" %)**Measurement the soil surface:**
435 +)))
406 406  
407 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654584128046-287.png?rev=1.1||alt="1654584128046-287.png"]]
437 +(((
438 +[[image:1654592946732-634.png]]
439 +)))
408 408  
441 +(((
409 409  Choose the proper measuring position. Split the surface soil according to the measured deep.
443 +)))
410 410  
445 +(((
411 411  Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.
447 +)))
412 412  
449 +(((
413 413  Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.
451 +)))
414 414  
453 +(((
415 415  Put soil over the probe after insert. And start to measure.
455 +)))
416 416  
457 +(((
458 +
459 +)))
417 417  
461 +(((
418 418  (% style="color:#4f81bd" %)**Measurement inside soil:**
463 +)))
419 419  
465 +(((
420 420  Dig a hole with diameter > 20CM.
467 +)))
421 421  
469 +(((
422 422  Insert the probe inside, method like measure the surface.
471 +)))
423 423  
424 424  
425 425  
... ... @@ -449,16 +449,20 @@
449 449  
450 450  == 2.7 Calibration ==
451 451  
501 +(((
452 452  User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).
503 +)))
453 453  
505 +(((
454 454  After stable, user can use below command to calibrate.
507 +)))
455 455  
456 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607144936-3.png?rev=1.1||alt="image-20220607144936-3.png"]]
509 +[[image:image-20220607171149-4.png]]
457 457  
458 458  
459 459  (% style="color:#037691" %)**Calibration Payload**
460 460  
461 -(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)
514 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
462 462  |(((
463 463  **Size**
464 464  
... ... @@ -480,8 +480,9 @@
480 480  
481 481  User can also send 0x14 downlink command to poll the current calibration payload.
482 482  
483 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607145603-4.png?rev=1.1||alt="image-20220607145603-4.png"]]
536 +[[image:image-20220607171416-7.jpeg]]
484 484  
538 +
485 485  * Reply to the confirmation package: 14 01
486 486  * Reply to non-confirmed packet: 14 00
487 487  
... ... @@ -494,32 +494,61 @@
494 494  
495 495  === 2.8.1 EU863-870 (EU868) ===
496 496  
551 +(((
497 497  (% style="color:blue" %)**Uplink:**
553 +)))
498 498  
555 +(((
499 499  868.1 - SF7BW125 to SF12BW125
557 +)))
500 500  
559 +(((
501 501  868.3 - SF7BW125 to SF12BW125 and SF7BW250
561 +)))
502 502  
563 +(((
503 503  868.5 - SF7BW125 to SF12BW125
565 +)))
504 504  
567 +(((
505 505  867.1 - SF7BW125 to SF12BW125
569 +)))
506 506  
571 +(((
507 507  867.3 - SF7BW125 to SF12BW125
573 +)))
508 508  
575 +(((
509 509  867.5 - SF7BW125 to SF12BW125
577 +)))
510 510  
579 +(((
511 511  867.7 - SF7BW125 to SF12BW125
581 +)))
512 512  
583 +(((
513 513  867.9 - SF7BW125 to SF12BW125
585 +)))
514 514  
587 +(((
515 515  868.8 - FSK
589 +)))
516 516  
591 +(((
592 +
593 +)))
517 517  
595 +(((
518 518  (% style="color:blue" %)**Downlink:**
597 +)))
519 519  
599 +(((
520 520  Uplink channels 1-9 (RX1)
601 +)))
521 521  
603 +(((
522 522  869.525 - SF9BW125 (RX2 downlink only)
605 +)))
523 523  
524 524  
525 525  
... ... @@ -542,46 +542,89 @@
542 542  
543 543  === 2.8.3 CN470-510 (CN470) ===
544 544  
628 +(((
545 545  Used in China, Default use CHE=1
630 +)))
546 546  
632 +(((
547 547  (% style="color:blue" %)**Uplink:**
634 +)))
548 548  
636 +(((
549 549  486.3 - SF7BW125 to SF12BW125
638 +)))
550 550  
640 +(((
551 551  486.5 - SF7BW125 to SF12BW125
642 +)))
552 552  
644 +(((
553 553  486.7 - SF7BW125 to SF12BW125
646 +)))
554 554  
648 +(((
555 555  486.9 - SF7BW125 to SF12BW125
650 +)))
556 556  
652 +(((
557 557  487.1 - SF7BW125 to SF12BW125
654 +)))
558 558  
656 +(((
559 559  487.3 - SF7BW125 to SF12BW125
658 +)))
560 560  
660 +(((
561 561  487.5 - SF7BW125 to SF12BW125
662 +)))
562 562  
664 +(((
563 563  487.7 - SF7BW125 to SF12BW125
666 +)))
564 564  
668 +(((
669 +
670 +)))
565 565  
672 +(((
566 566  (% style="color:blue" %)**Downlink:**
674 +)))
567 567  
676 +(((
568 568  506.7 - SF7BW125 to SF12BW125
678 +)))
569 569  
680 +(((
570 570  506.9 - SF7BW125 to SF12BW125
682 +)))
571 571  
684 +(((
572 572  507.1 - SF7BW125 to SF12BW125
686 +)))
573 573  
688 +(((
574 574  507.3 - SF7BW125 to SF12BW125
690 +)))
575 575  
692 +(((
576 576  507.5 - SF7BW125 to SF12BW125
694 +)))
577 577  
696 +(((
578 578  507.7 - SF7BW125 to SF12BW125
698 +)))
579 579  
700 +(((
580 580  507.9 - SF7BW125 to SF12BW125
702 +)))
581 581  
704 +(((
582 582  508.1 - SF7BW125 to SF12BW125
706 +)))
583 583  
708 +(((
584 584  505.3 - SF12BW125 (RX2 downlink only)
710 +)))
585 585  
586 586  
587 587  
... ... @@ -608,108 +608,217 @@
608 608  
609 609  === 2.8.5 AS920-923 & AS923-925 (AS923) ===
610 610  
737 +(((
611 611  (% style="color:blue" %)**Default Uplink channel:**
739 +)))
612 612  
741 +(((
613 613  923.2 - SF7BW125 to SF10BW125
743 +)))
614 614  
745 +(((
615 615  923.4 - SF7BW125 to SF10BW125
747 +)))
616 616  
749 +(((
750 +
751 +)))
617 617  
753 +(((
618 618  (% style="color:blue" %)**Additional Uplink Channel**:
755 +)))
619 619  
757 +(((
620 620  (OTAA mode, channel added by JoinAccept message)
759 +)))
621 621  
761 +(((
762 +
763 +)))
622 622  
765 +(((
623 623  (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
767 +)))
624 624  
769 +(((
625 625  922.2 - SF7BW125 to SF10BW125
771 +)))
626 626  
773 +(((
627 627  922.4 - SF7BW125 to SF10BW125
775 +)))
628 628  
777 +(((
629 629  922.6 - SF7BW125 to SF10BW125
779 +)))
630 630  
781 +(((
631 631  922.8 - SF7BW125 to SF10BW125
783 +)))
632 632  
785 +(((
633 633  923.0 - SF7BW125 to SF10BW125
787 +)))
634 634  
789 +(((
635 635  922.0 - SF7BW125 to SF10BW125
791 +)))
636 636  
793 +(((
794 +
795 +)))
637 637  
797 +(((
638 638  (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
799 +)))
639 639  
801 +(((
640 640  923.6 - SF7BW125 to SF10BW125
803 +)))
641 641  
805 +(((
642 642  923.8 - SF7BW125 to SF10BW125
807 +)))
643 643  
809 +(((
644 644  924.0 - SF7BW125 to SF10BW125
811 +)))
645 645  
813 +(((
646 646  924.2 - SF7BW125 to SF10BW125
815 +)))
647 647  
817 +(((
648 648  924.4 - SF7BW125 to SF10BW125
819 +)))
649 649  
821 +(((
650 650  924.6 - SF7BW125 to SF10BW125
823 +)))
651 651  
825 +(((
826 +
827 +)))
652 652  
829 +(((
653 653  (% style="color:blue" %)**Downlink:**
831 +)))
654 654  
833 +(((
655 655  Uplink channels 1-8 (RX1)
835 +)))
656 656  
837 +(((
657 657  923.2 - SF10BW125 (RX2)
839 +)))
658 658  
659 659  
660 660  
661 661  === 2.8.6 KR920-923 (KR920) ===
662 662  
845 +(((
663 663  (% style="color:blue" %)**Default channel:**
847 +)))
664 664  
849 +(((
665 665  922.1 - SF7BW125 to SF12BW125
851 +)))
666 666  
853 +(((
667 667  922.3 - SF7BW125 to SF12BW125
855 +)))
668 668  
857 +(((
669 669  922.5 - SF7BW125 to SF12BW125
859 +)))
670 670  
861 +(((
862 +
863 +)))
671 671  
865 +(((
672 672  (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
867 +)))
673 673  
869 +(((
674 674  922.1 - SF7BW125 to SF12BW125
871 +)))
675 675  
873 +(((
676 676  922.3 - SF7BW125 to SF12BW125
875 +)))
677 677  
877 +(((
678 678  922.5 - SF7BW125 to SF12BW125
879 +)))
679 679  
881 +(((
680 680  922.7 - SF7BW125 to SF12BW125
883 +)))
681 681  
885 +(((
682 682  922.9 - SF7BW125 to SF12BW125
887 +)))
683 683  
889 +(((
684 684  923.1 - SF7BW125 to SF12BW125
891 +)))
685 685  
893 +(((
686 686  923.3 - SF7BW125 to SF12BW125
895 +)))
687 687  
897 +(((
898 +
899 +)))
688 688  
901 +(((
689 689  (% style="color:blue" %)**Downlink:**
903 +)))
690 690  
905 +(((
691 691  Uplink channels 1-7(RX1)
907 +)))
692 692  
909 +(((
693 693  921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
911 +)))
694 694  
695 695  
696 696  
697 697  === 2.8.7 IN865-867 (IN865) ===
698 698  
917 +(((
699 699  (% style="color:blue" %)**Uplink:**
919 +)))
700 700  
921 +(((
701 701  865.0625 - SF7BW125 to SF12BW125
923 +)))
702 702  
925 +(((
703 703  865.4025 - SF7BW125 to SF12BW125
927 +)))
704 704  
929 +(((
705 705  865.9850 - SF7BW125 to SF12BW125
931 +)))
706 706  
933 +(((
934 +
935 +)))
707 707  
937 +(((
708 708  (% style="color:blue" %)**Downlink:**
939 +)))
709 709  
941 +(((
710 710  Uplink channels 1-3 (RX1)
943 +)))
711 711  
945 +(((
712 712  866.550 - SF10BW125 (RX2)
947 +)))
713 713  
714 714  
715 715  
... ... @@ -720,6 +720,9 @@
720 720  * The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.
721 721  * Blink once when device transmit a packet.
722 722  
958 +
959 +
960 +
723 723  == 2.10 ​Firmware Change Log ==
724 724  
725 725  
... ... @@ -734,26 +734,51 @@
734 734  
735 735  = 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =
736 736  
975 +(((
737 737  Use can configure LSPH01 via AT Command or LoRaWAN Downlink.
977 +)))
738 738  
739 -* AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
740 -* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
979 +* (((
980 +AT Command Connection: See [[FAQ>>path:#H6.FAQ]].
981 +)))
982 +* (((
983 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>path:/xwiki/bin/view/Main/]]
984 +)))
741 741  
986 +(((
742 742  There are two kinds of commands to configure LSPH01, they are:
988 +)))
743 743  
744 -* (% style="color:#4f81bd" %)** General Commands**.
990 +* (((
991 +(% style="color:#4f81bd" %)** General Commands**.
992 +)))
745 745  
994 +(((
746 746  These commands are to configure:
996 +)))
747 747  
748 -* General system settings like: uplink interval.
749 -* LoRaWAN protocol & radio related command.
998 +* (((
999 +General system settings like: uplink interval.
1000 +)))
1001 +* (((
1002 +LoRaWAN protocol & radio related command.
1003 +)))
750 750  
1005 +(((
751 751  They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>path:/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1007 +)))
752 752  
1009 +(((
1010 +
1011 +)))
753 753  
754 -* (% style="color:#4f81bd" %)** Commands special design for LSPH01**
1013 +* (((
1014 +(% style="color:#4f81bd" %)** Commands special design for LSPH01**
1015 +)))
755 755  
1017 +(((
756 756  These commands only valid for LSPH01, as below:
1019 +)))
757 757  
758 758  
759 759  
... ... @@ -763,30 +763,31 @@
763 763  
764 764  (% style="color:#037691" %)**AT Command: AT+TDC**
765 765  
1029 +[[image:image-20220607171554-8.png]]
766 766  
767 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)
768 -|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**
769 -|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((
770 -30000
771 771  
772 -OK
773 773  
774 -the interval is 30000ms = 30s
1033 +(((
1034 +(% style="color:#037691" %)**Downlink Command: 0x01**
775 775  )))
776 -|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((
777 -OK
778 778  
779 -Set transmit interval to 60000ms = 60 seconds
1037 +(((
1038 +Format: Command Code (0x01) followed by 3 bytes time value.
780 780  )))
781 781  
782 -(% style="color:#037691" %)**Downlink Command: 0x01**
1041 +(((
1042 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1043 +)))
783 783  
784 -Format: Command Code (0x01) followed by 3 bytes time value.
1045 +* (((
1046 +Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1047 +)))
1048 +* (((
1049 +Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
785 785  
786 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
787 787  
788 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
789 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1052 +
1053 +)))
790 790  
791 791  == 3.2 Set Interrupt Mode ==
792 792  
... ... @@ -794,18 +794,34 @@
794 794  
795 795  (% style="color:#037691" %)**AT Command: AT+INTMOD**
796 796  
797 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607153759-6.png?rev=1.1||alt="image-20220607153759-6.png"]]
1061 +[[image:image-20220607171716-9.png]]
798 798  
799 799  
1064 +(((
800 800  (% style="color:#037691" %)**Downlink Command: 0x06**
1066 +)))
801 801  
1068 +(((
802 802  Format: Command Code (0x06) followed by 3 bytes.
1070 +)))
803 803  
1072 +(((
804 804  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1074 +)))
805 805  
806 -* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
807 -* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1076 +* (((
1077 +Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
1078 +)))
1079 +* (((
1080 +Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
1081 +)))
808 808  
1083 +(((
1084 +
1085 +)))
1086 +
1087 +
1088 +
809 809  == 3.3 Calibrate Sensor ==
810 810  
811 811  Detail See [[Calibration Guide>>path:#H2.7Calibration]] for the user of 0x13 and 0x14 downlink commands
... ... @@ -818,7 +818,7 @@
818 818  
819 819  (% style="color:#037691" %)**Downlink Command: 0x26**
820 820  
821 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607154718-7.png?rev=1.1||alt="image-20220607154718-7.png"]]
1101 +[[image:image-20220607171917-10.png]]
822 822  
823 823  * Reply to the confirmation package: 26 01
824 824  * Reply to non-confirmed packet: 26 00
... ... @@ -906,7 +906,7 @@
906 906  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
907 907  )))
908 908  
909 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588469844-778.png?rev=1.1||alt="1654588469844-778.png"]]
1189 +[[image:1654593587246-335.png]]
910 910  
911 911  
912 912  Minimum Working Voltage for the LSPH01:
... ... @@ -951,7 +951,7 @@
951 951  
952 952  And the Life expectation in difference case will be shown on the right.
953 953  
954 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654588577573-122.png?rev=1.1||alt="1654588577573-122.png"]]
1234 +[[image:1654593605679-189.png]]
955 955  
956 956  
957 957  The battery related documents as below:
... ... @@ -966,7 +966,7 @@
966 966  [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]
967 967  )))
968 968  
969 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/image-20220607155856-8.png?rev=1.1||alt="image-20220607155856-8.png"]]
1249 +[[image:image-20220607172042-11.png]]
970 970  
971 971  
972 972  
... ... @@ -980,9 +980,13 @@
980 980  
981 981  === ​4.3.2 Replace the battery ===
982 982  
1263 +(((
983 983  You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
1265 +)))
984 984  
1267 +(((
985 985  The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1269 +)))
986 986  
987 987  
988 988  
... ... @@ -992,7 +992,7 @@
992 992  
993 993  LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.
994 994  
995 -[[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589001411-343.png?rev=1.1||alt="1654589001411-343.png"]]
1279 +[[image:1654593668970-604.png]]
996 996  
997 997  **Connection:**
998 998  
... ... @@ -1003,10 +1003,12 @@
1003 1003  (% style="background-color:yellow" %)** USB TTL RXD  <~-~-~-~-> UART_TXD**
1004 1004  
1005 1005  
1290 +(((
1006 1006  In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:
1292 +)))
1007 1007  
1008 1008  
1009 - [[image:/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSPH01-LoRaWAN%20Soil%20pH%20Sensor%20User%20Manual/WebHome/1654589062541-567.png?rev=1.1||alt="1654589062541-567.png"]]
1295 + [[image:1654593712276-618.png]]
1010 1010  
1011 1011  Valid AT Command please check [[Configure Device>>path:#H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink]].
1012 1012  
... ... @@ -1064,3 +1064,4 @@
1064 1064  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1065 1065  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].
1066 1066  
1353 +
1654592762713-715.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.2 KB
Content
1654592790040-760.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +62.2 KB
Content
1654592800389-571.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +66.6 KB
Content
1654592819047-535.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +246.2 KB
Content
1654592833877-762.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +199.6 KB
Content
1654592856403-259.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +129.1 KB
Content
1654592878525-845.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.7 KB
Content
1654592892967-474.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +64.0 KB
Content
1654592905354-123.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.3 KB
Content
1654592917530-261.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +127.1 KB
Content
1654592946732-634.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +345.3 KB
Content
1654593587246-335.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.8 KB
Content
1654593605679-189.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +138.2 KB
Content
1654593668970-604.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +546.2 KB
Content
1654593712276-618.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +144.0 KB
Content
image-20220607171123-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.8 KB
Content
image-20220607171149-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +24.8 KB
Content
image-20220607171311-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607171335-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.1 KB
Content
image-20220607171416-7.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +5.0 KB
Content
image-20220607171554-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20220607171716-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220607171917-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.2 KB
Content
image-20220607172042-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +83.7 KB
Content