LHT65N LoRaWAN Temperature & Humidity Sensor Manual

The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a(% class="mark" %) **built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% class="mark" %)**Temperature Sensor**(%%)**.**

18

19

The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

20

21

LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

22

23

LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

24

25

LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

26

27

*The actual battery life depends on how often to send data, please see the battery analyzer chapter.

== 1.2 Features ==

* Wall mountable

* LoRaWAN v1.0.3 Class A protocol

33

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

34

* AT Commands to change parameters

35

* Remote configure parameters via LoRaWAN Downlink

36

* Firmware upgradeable via program port

37

* Built-in 2400mAh battery for up to 10 years of use.

38

* Built-in Temperature & Humidity sensor

39

* Optional External Sensors

40

* Tri-color LED to indicate working status

41

* Datalog feature

42

43

== 1.3 Specification ==

44

45

**Built-in Temperature Sensor:**

46

47

* Resolution: 0.01 °C

48

* Accuracy Tolerance : Typ ±0.3 °C

49

* Long Term Drift: < 0.02 °C/yr

50

* Operating Range: -40 ~~ 85 °C

51

52

**Built-in Humidity Sensor:**

53

54

* Resolution: 0.04 %RH

55

* Accuracy Tolerance : Typ ±3 %RH

56

* Long Term Drift: < 0.02 °C/yr

57

* Operating Range: 0 ~~ 96 %RH

58

59

**External Temperature Sensor:**

60

61

* Resolution: 0.0625 °C

62

* ±0.5°C accuracy from -10°C to +85°C

63

* ±2°C accuracy from -55°C to +125°C

64

* Operating Range: -55 °C ~~ 125 °C

65

66

= 2. Connect LHT65N to IoT Server =

67

68

== 2.1 How does LHT65N work? ==

69

70

LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.

71

72

If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.

73

74

75

== 2.2 How to Activate LHT65N? ==

76

77

The LHT65N has two working modes:

78

79

* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.

80

* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.

81

82

The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:

83

84

[[image:image-20220515123819-1.png||height="379" width="317"]]

85

86

(% border="1" %)

87

|**Behavior on ACT**|**Function**|**Action**

88

|**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.

89

|**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.

90

|**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.

91

92

== 2.3 Example to join LoRaWAN network ==

93

94

(% class="wikigeneratedid" %)

95

This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.

96

97

(% class="wikigeneratedid" %)

98

[[image:image-20220522232442-1.png||height="387" width="648"]]

99

100

Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:

101

102

103

=== 2.3.1 Step 1: Create Device n TTN ===

104

105

Create a device in TTN V3 with the OTAA keys from LHT65N.

106

107

Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:

108

109

[[image:image-20220522232812-2.png||height="219" width="279"]]

110

111

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:

112

113

Add APP EUI in the application.

114

115

[[image:image-20220522232916-3.png]]

116

117

118

[[image:image-20220522232932-4.png]]

119

120

121

[[image:image-20220522232954-5.png]]

122

123

Note: LHT65N use same payload as LHT65.

124

125

[[image:image-20220522233026-6.png]]

126

127

128

Input APP EUI, APP KEY and DEV EUI:

129

130

[[image:image-20220522233118-7.png]]

131

132

133

=== 2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===

134

135

Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

136

137

[[image:image-20220522233300-8.png]]

138

139

140

== 2.4 Uplink Payload ==

141

142

The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and(% class="mark" %) every 20 minutes(%%) send one uplink by default.

143

144

After each uplink, the (% class="mark" %)BLUE LED(%%) will blink once.

145

146

147

(% border="1" style="width:572px" %)

148

149

|(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:#Battery]]|(% style="width:128px" %)(((

150

[[Built-In>>path:#SHT20_Temperature]]

151

152

[[Temperature>>path:#SHT20_Temperature]]

153

)))|(% style="width:103px" %)(((

154

[[Built-in>>path:#SHT20_Humidity]]

155

156

[[Humidity>>path:#SHT20_Humidity]]

157

)))|(% style="width:72px" %)[[Ext>>path:#Extension_Sensor]] #|(% style="width:89px" %)[[Ext value>>path:#Extension_sensor_value]]

158

159

* The First 6 bytes: has fix meanings for every LHT65N.

160

* The 7th byte (EXT #): defines the external sensor model.

161

* The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)

162

163

=== 2.4.1 Decoder in TTN V3 ===

164

165

When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.

166

167

Below is the position to put the decoder and LHT65N decoder can be download from here:

168

169

[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]

170

171

[[image:image-20220522234118-10.png]]

172

173

174

=== 2.4.2 BAT-Battery Info ===

175

176

These two bytes of BAT include the battery state and the actually voltage

177

178

(% style="width:646px" %)

179

|Bit(bit)|(% style="width:272px" %)[15:14]|(% style="width:214px" %)[13:0]

180

|Value|(% style="width:272px" %)(((

181

BAT Status

182

183

00(b): Ultra Low ( BAT <= 2.50v)

184

185

01(b): Low (2.50v <=BAT <= 2.55v)

186

187

10(b): OK (2.55v <= BAT <=2.65v)

188

189

11(b): Good (BAT >= 2.65v)

190

)))|(% style="width:214px" %)Actually BAT voltage

191

192

[[image:image-20220522235639-1.png]]

193

194

Check the battery voltage for LHT65N.

195

196

* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good

197

* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV

198

199

=== 2.4.3 Built-in Temperature ===

200

201

[[image:image-20220522235639-2.png]]

202

203

* Temperature: 0x0ABB/100=27.47℃

204

205

[[image:image-20220522235639-3.png]]

206

207

* Temperature: (0xF5C6-65536)/100=-26.18℃

208

209

=== 2.4.4 Built-in Humidity ===

210

211

[[image:image-20220522235639-4.png]]

212

213

* Humidity: 0x025C/10=60.4%

=== 2.4.5 Ext # ===

Bytes for External Sensor:

218

219

(% style="width:624px" %)

220

|(% style="width:139px" %)**EXT # Value**|(% style="width:484px" %)**External Sensor Type**

221

|(% style="width:139px" %)0x01|(% style="width:484px" %)Sensor E3, Temperature Sensor

222

|(% style="width:139px" %)0x09|(% style="width:484px" %)Sensor E3, Temperature Sensor, Datalog Mod

223

224

=== 2.4.6 Ext value ===

225

226

==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====

227

228

[[image:image-20220522235639-5.png]]

229

230

* DS18B20 temp=0x0ADD/100=27.81℃

231

232

The last 2 bytes of data are meaningless

233

234

[[image:image-20220522235639-6.png]]

235

236

* External temperature= (0xF54F-65536)/100=-27.37℃

237

238

The last 2 bytes of data are meaningless

239

240

If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃

241

242

243

==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====

244

245

Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:

246

247

248

(% border="1" style="width:697px" %)

249

250

|(% style="width:96px" %)**Value**|(% style="width:164px" %)[[External temperature>>path:#DS18b20_value]]|(% style="width:104px" %)(((

251

[[Built-In>>path:#SHT20_Temperature]]

252

253

[[Temperature>>path:#SHT20_Temperature]]

254

)))|(% style="width:106px" %)(((

255

[[BAT Status &>>path:#BAT_Humidity]]

256

257

[[Built-in>>path:#BAT_Humidity]]

258

259

[[Humidity>>path:#BAT_Humidity]]

260

)))|(% style="width:108px" %)[[Status & Ext>>path:#Status_EXT]]|(% style="width:116px" %)(((

261

[[Unix>>path:#Unix_Time_Stamp]]

262

263

[[Time Stamp>>path:#Unix_Time_Stamp]]

264

)))

265

266

* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]

267

268

(% border="1" style="width:587px" %)

269

|Bit(bit)|(% style="width:280px" %)[15:14]|(% style="width:136px" %)[11:0]

270

|Value|(% style="width:280px" %)(((

271

BAT Status

272

273

00(b): Ultra Low ( BAT <= 2.50v)

274

275

01(b): Low (2.50v <=BAT <= 2.55v)

276

277

10(b): OK (2.55v <= BAT <=2.65v)

278

279

11(b): Good (BAT >= 2.65v)

280

)))|(% style="width:136px" %)(((

281

[[Built-in Humidity>>path:#SHT20_Humidity]]

)))

* **Status & Ext Byte**

287

288

(% border="1" style="width:732px" %)

Ext:

0b(1001)

)))

* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.

297

* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.

298

* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)

299

300

== 2.5 Show data on Datacake ==

301

302

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

303

304

**Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.

305

306

**Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

Add Datacake:

[[image:image-20220523000825-7.png||height="262" width="583"]]

312

313

314

Select default key as Access Key:

315

316

[[image:image-20220523000825-8.png||height="453" width="406"]]

317

318

319

In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT65 device.

320

321

[[image:image-20220523000825-9.png||height="366" width="392"]]

[[image:image-20220523000825-10.png||height="432" width="762"]]

326

327

328

== 2.6 Datalog Feature ==

329

330

This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.

331

332

=== 2.6.1 Unix TimeStamp ===

333

334

LHT65N uses Unix TimeStamp format based on

335

336

[[image:image-20220523001219-11.png||height="97" width="627"]]

337

338

339

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

340

341

Below is the converter example

342

343

[[image:image-20220523001219-12.png||height="302" width="730"]]

344

345

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

346

347

348

=== 2.6.2 Set Device Time ===

349

350

There are two ways to set device’s time:

351

352

**~1. Through LoRaWAN MAC Command (Default settings)**

353

354

User need to set SYNCMOD=1 to enable sync time via MAC command.

355

356

Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

357

358

Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.

359

360

361

**2. Manually Set Time**

362

363

User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.

364

365

366

=== 2.6.3 Poll sensor value ===

367

368

User can poll sensor value based on timestamps from the server. Below is the downlink command.

369

370

371

(% border="1" style="width:454px" %)

372

|(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte

373

|(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval

374

375

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

376

377

378

For example, downlink command 31 5FC5F350 5FC6 0160 05

379

380

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data

381

382

Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.

383

384

385

=== 2.6.4 Datalog Uplink payload ===

386

387

The Datalog poll reply uplink will use below payload format.

388

389

390

Retrieval data payload

391

392

(% border="1" %)

393

|**Size(bytes)**|**2**|**2**|**2**|**1**|**4**

394

|**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((

395

[[Built-In>>path:#SHT20_Temperature]]

396

397

[[Temperature>>path:#SHT20_Temperature]]

398

)))|(((

399

[[Built-in>>path:#SHT20_Humidity]]

400

401

[[Humidity>>path:#SHT20_Humidity]]

402

)))|[[Poll message flag & Ext>>path:#Poll_EXT]]|(((

403

[[Unix Time Stamp>>path:#Unix_Time_Stamp]]

)))

Poll message flag & Ext

(% border="1" %)

|**Bits**|**7**|**6**|**5**|**4**|**[3:0]**

Ext:

0b(1001)

)))

Poll Message Flag: 1: This message is a poll message reply.

420

421

* Poll Message Flag is set to 1.

422

* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.

423

424

For example, in US915 band, the max payload for different DR is:

425

426

a) DR0: max is 11 bytes so one entry of data

427

428

b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

429

430

c) DR2: total payload includes 11 entries of data

431

432

d) DR3: total payload includes 22 entries of data.

433

434

If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0

**Example:**

If LHT65N has below data inside Flash:

440

441

Flash Addr |Unix Time | Ext | BAT voltage| Value

442

443

80196E0 21/1/19 04:27:03 1 3145 sht_temp=22.00 sht_hum=32.6 ds_temp=327.67

444

445

80196F0 21/1/19 04:28:57 1 3145 sht_temp=21.90 sht_hum=33.1 ds_temp=327.67

446

447

8019700 21/1/19 04:30:30 1 3145 sht_temp=21.81 sht_hum=33.4 ds_temp=327.67

448

449

8019710 21/1/19 04:40:30 1 3145 sht_temp=21.65 sht_hum=33.7 ds_temp=327.67

450

451

8019720 21/1/19 04:50:30 1 3147 sht_temp=21.55 sht_hum=34.1 ds_temp=327.67

452

453

8019730 21/1/19 05:00:30 1 3149 sht_temp=21.50 sht_hum=34.1 ds_temp=327.67

454

455

8019740 21/1/19 05:10:30 1 3149 sht_temp=21.43 sht_hum=34.6 ds_temp=327.67

456

457

8019750 21/1/19 05:20:30 1 3151 sht_temp=21.35 sht_hum=34.9 ds_temp=327.67

458

459

460

If user sends below downlink command:

3160065F9760066DA705

Where : Start time: 60065F97 = time 21/1/19 04:27:03

465

466

Stop time 60066DA7= time 21/1/19 05:27:03

467

468

469

LHT65N will uplink this payload.

470

471

[[image:image-20220523001219-13.png||height="421" width="727"]]

472

473

7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E

474

475

Where the first 11 bytes is for the first entry:

476

477

7FFF089801464160065F97

478

479

Ext sensor data=0x7FFF/100=327.67

480

481

Temp=0x0898/100=22.00

Hum=0x0146/10=32.6

poll message flag & Ext=0x41,means reply data,Ext=1

486

487

Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03

== 2.7 Alarm Mode ==

Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

493

494

495

Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.

496

497

498

AT Commands for Alarm mode:

499

500

**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)

501

502

**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)

== 2.8 LED Indicator ==

507

508

The LHT65N has a triple color LED which for easy shows different stage.

509

510

While pressing ACT button, the LED will work as per LED status with ACT button.

511

512

In a normal working state:

513

514

* For each uplink, the BLUE LED or RED LED will blink once.

515

* BLUE LED when an external sensor is connected

516

* RED LED when an external sensor is not connected

517

* For each success downlink, the PURPLE LED will blink once

----

== 2.9 Installation ==

522

523

[[image:image-20220516231650-1.png||height="436" width="428"]]

524

525

= 3. Sensors & Accessories =

526

527

== 3.1 E3 Temperature Probe ==

528

529

[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]

530

531

532

With Temperature sensor with 2 meters cable long

533

534

* Resolution: 0.0625 °C

535

* ±0.5°C accuracy from -10°C to +85°C

536

* ±2°C accuracy from -55°C to +125°C

537

* Operating Range: -40 ~~ 125 °C

538

* -55°C to 125°C

539

* Working voltage 2.35v ~~ 5v

540

541

= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =

542

543

Use can configure LHT65N via AT Command or LoRaWAN Downlink.

544

545

* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

546

* LoRaWAN Downlink instruction for different platforms:

547

548

[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

549

550

There are two kinds of commands to configure LHT65N, they are:

551

552

* **General Commands**.

553

554

These commands are to configure:

555

556

* General system settings like: uplink interval.

557

* LoRaWAN protocol & radio-related commands.

558

559

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:

560

561

[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

562

563

* **Commands special design for LHT65N**

564

565

These commands are only valid for LHT65N, as below:

566

567

== 4.1 Set Transmit Interval Time ==

568

569

Feature: Change LoRaWAN End Node Transmit Interval.

570

571

**AT Command: AT+TDC**

572

573

(% border="1" %)

574

|**Command Example**|**Function**|**Response**

575

|AT+TDC?|Show current transmit Interval|(((

30000

OK

the interval is 30000ms = 30s

581

)))

582

|AT+TDC=60000|Set Transmit Interval|(((

583

OK

584

585

Set transmit interval to 60000ms = 60 seconds

586

)))

587

588

**Downlink Command: 0x01**

589

590

Format: Command Code (0x01) followed by 3 bytes time value.

591

592

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

593

594

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

595

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

596

597

== 4.2 Set External Sensor Mode ==

598

599

Feature: Change External Sensor Mode.

600

601

**AT Command: AT+EXT**

602

603

(% border="1" %)

604

|**Command Example**|**Function**|**Response**

605

|AT+EXT?|Get current external sensor mode|(((

1

OK

External Sensor mode =1

611

)))

612

|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1

613

|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp

614

615

**Downlink Command: 0xA2**

616

617

Total bytes: 2 ~~ 5 bytes

Example:

* 0xA201: Set external sensor type to E1

622

* 0xA209: Same as AT+EXT=9

623

* 0xA20702003c,Same as AT+SETCNT=60

624

625

== 4.3 Enable/Disable uplink Temperature probe ID ==

626

627

Feature: If PID is enabled, device will send the temperature probe ID on:

628

629

* First Packet after OTAA Join

630

* Every 24 hours since the first packet.

631

632

PID is default set to disable (0)

**AT Command:**

(% border="1" %)

|**Command Example**|**Function**|**Response**

639

|AT+PID=1|Enable PID uplink|OK

640

641

**Downlink Command:**

* 0xA800 à AT+PID=0

* 0xA801 à AT+PID=1

== 4.4 Set Password ==

647

648

Feature: Set device password, max 9 digits

649

650

**AT Command: AT+PWORD**

651

652

(% border="1" %)

653

|**Command Example**|**Function**|**Response**

654

|AT+PWORD=?|Show password|(((

123456

OK

)))

|AT+PWORD=999999|Set password|OK

661

662

**Downlink Command:**

663

664

No downlink command for this feature.

665

666

== 4.5 Quit AT Command ==

667

668

Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.

669

670

**AT Command: AT+DISAT**

671

672

(% border="1" %)

673

|**Command Example**|**Function**|**Response**

674

|AT+DISAT|Quit AT Commands mode|OK

675

676

**Downlink Command:**

677

678

No downlink command for this feature.

679

680

681

== 4.6 Set to sleep mode ==

682

683

Feature: Set device to sleep mode

684

685

**AT Command: AT+SLEEP**

(% border="1" %)

| | |

|**Command Example**|**Function**|**Response**

690

|AT+SLEEP|Set to sleep mode|(((

691

Clear all stored sensor data…

OK

)))

**Downlink Command:**

697

698

* There is no downlink command to set to Sleep mode.

699

700

== 4.7 Set system time ==

701

702

Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]

**AT Command:**

(% border="1" %)

|**Command Example**|**Function**

708

|AT+TIMESTAMP=1611104352|(((

709

OK

710

711

Set System time to 2021-01-20 00:59:12

712

)))

713

714

**Downlink Command:**

715

716

0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352

717

718

== 4.8 Set Time Sync Mode ==

719

720

Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.

721

722

SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.

**AT Command:**

|**Command Example**|**Function**

728

|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)

729

730

**Downlink Command:**

731

732

0x28 01 ~/~/ Same As AT+SYNCMOD=1

733

734

0x28 00 ~/~/ Same As AT+SYNCMOD=0

735

736

== 4.9 Set Time Sync Interval ==

737

738

Feature: Define System time sync interval. SYNCTDC default value: 10 days.

**AT Command:**

(% border="1" %)

|**Command Example**|**Function**

744

|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.

745

746

**Downlink Command:**

747

748

0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A

749

750

== 4.10 Print data entries base on page. ==

751

752

Feature: Print the sector data from start page to stop page (max is 416 pages).

753

754

**AT Command: AT+PDTA**

755

756

(% border="1" %)

757

|**Command Example**|**Response**

|(((

AT+PDTA=1,3

Print page 1 to 3

)))|(((

8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31

766

767

8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93

768

769

8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06

770

771

8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12

772

773

8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06

774

775

8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68

776

777

8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56

8019570

8019580

8019590

80195A0

80195B0

80195C0

80195D0

80195E0

80195F0

OK

)))

**Downlink Command:**

802

803

No downlink commands for feature

804

805

== 4.11 Print last few data entries. ==

806

807

Feature: Print the last few data entries

808

809

**AT Command: AT+PLDTA**

810

811

(% border="1" %)

812

|**Command Example**|**Response**

|(((

AT+PLDTA=5

Print last 5 entries

)))|(((

Stop Tx and RTP events when read sensor data

821

822

1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75

823

824

2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43

825

826

3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56

827

828

4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75

829

830

5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43

831

832

Start Tx and RTP events

OK

)))

**Downlink Command:**

838

839

No downlink commands for feature

840

841

== 4.12 Clear Flash Record ==

842

843

Feature: Clear flash storage for data log feature.

844

845

**AT Command: AT+CLRDTA**

846

847

(% border="1" %)

848

|**Command Example**|**Function**|**Response**

849

|AT+CLRDTA|Clear date record|(((

850

Clear all stored sensor data…

OK

)))

**Downlink Command: 0xA3**

856

857

* Example: 0xA301 ~/~/Same as AT+CLRDTA

858

859

= 5. Battery & How to replace =

860

861

== 5.1 Battery Type ==

862

863

LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.

864

865

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

866

[[image:image-20220515075034-1.png||height="208" width="644"]]

867

868

The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.

869

870

871

== 5.2 Replace Battery ==

872

873

LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.

874

875

[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]

876

877

== 5.3 Battery Life Analyze ==

878

879

Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:

880

https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf

881