Skip to Content
Last modified by Xiaoling on 2025/06/10 09:17
From version 45.6
edited by Xiaoling
on 2023/05/27 08:59
Change comment: There is no comment for this version
To version 47.1
edited by Bei Jinggeng
on 2023/10/31 17:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -45,8 +45,6 @@
45 45  * External PIR Sensor
46 46  * Tri-color LED to indicate working status
47 47  
48 -
49 -
50 50  (% style="display:none" %)
51 51  
52 52  == 1.3 Specification ==
... ... @@ -72,8 +72,6 @@
72 72  * Cable Length : 1 meter
73 73  * Stable detect distance : 0~~3 meter
74 74  
75 -
76 -
77 77  = 2. Connect LHT65N-PIR to IoT Server =
78 78  
79 79  == 2.1 How does LHT65N-PIR work? ==
... ... @@ -102,16 +102,14 @@
102 102  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
103 103  |=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
104 104  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Test uplink status|(% style="background-color:#f2f2f2; width:225px" %)(((
105 -If LHT65N is already Joined to rhe LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
101 +If LHT65N-PIR is already Joined to rhe LoRaWAN network, LHT65N-PIR will send an uplink packet, if LHT65N-PIR has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N-PIR has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
106 106  )))
107 107  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
108 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network.
104 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N-PIR will enter working mode and start to JOIN LoRaWAN network.
109 109  (% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after join in network.
110 110  )))
111 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N is in Deep Sleep Mode.
107 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N-PIR is in Deep Sleep Mode.
112 112  
113 -
114 -
115 115  == 2.3 Example to join LoRaWAN network ==
116 116  
117 117  
... ... @@ -193,34 +193,35 @@
193 193  
194 194  (% style="color:blue" %)**Frequency Band**:
195 195  
196 -*0x01: EU868
190 +0x01: EU868
197 197  
198 -*0x02: US915
192 +0x02: US915
199 199  
200 -*0x03: IN865
194 +0x03: IN865
201 201  
202 -*0x04: AU915
196 +0x04: AU915
203 203  
204 -*0x05: KZ865
198 +0x05: KZ865
205 205  
206 -*0x06: RU864
200 +0x06: RU864
207 207  
208 -*0x07: AS923
202 +0x07: AS923
209 209  
210 -*0x08: AS923-1
204 +0x08: AS923-1
211 211  
212 -*0x09: AS923-2
206 +0x09: AS923-2
213 213  
214 -*0x0a: AS923-3
208 +0x0a: AS923-3
215 215  
216 -*0x0b: CN470
210 +0x0b: CN470
217 217  
218 -*0x0c: EU433
212 +0x0c: EU433
219 219  
220 -*0x0d: KR920
214 +0x0d: KR920
221 221  
222 -*0x0e: MA869
216 +0x0e: MA869
223 223  
218 +
224 224  (% style="color:blue" %)**Sub-Band**:
225 225  
226 226  AU915 and US915: value 0x00 ~~ 0x08
... ... @@ -229,6 +229,7 @@
229 229  
230 230  Other Bands: Always 0x00
231 231  
227 +
232 232  (% style="color:blue" %)**Battery Info**:
233 233  
234 234  Check the battery voltage.
... ... @@ -282,8 +282,6 @@
282 282  * The 8^^th^^ byte: Alarm Bit (if this uplink is from periodically or movement)
283 283  * The 9^^th^^ ~~ 11^^st^^  byte: Movement Detect Count.
284 284  
285 -
286 -
287 287  === 2.5.1 Decoder in TTN V3 ===
288 288  
289 289  
... ... @@ -305,7 +305,7 @@
305 305  **Bit(bit)**
306 306  )))|=(% style="width: 253px;background-color:#D9E2F3;color:#0070C0" %)[15:14]|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)[13:0]
307 307  |(% style="width:66px" %)(((
308 -**Value**
302 +Value
309 309  )))|(% style="width:250px" %)(((
310 310  BAT Status
311 311  00(b): Ultra Low ( BAT <= 2.50v)
... ... @@ -324,6 +324,7 @@
324 324  
325 325  === 2.5.3 Built-in Temperature ===
326 326  
321 +
327 327  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-2.png||_mstalt="431756" height="138" width="722"]]
328 328  
329 329  * Temperature:  0x0ABB/100=27.47℃
... ... @@ -334,6 +334,7 @@
334 334  
335 335  === 2.5.4 Built-in Humidity ===
336 336  
332 +
337 337  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-4.png||_mstalt="432484" height="138" width="722"]]
338 338  
339 339  * Humidity:    0x025C/10=60.4%
... ... @@ -379,6 +379,7 @@
379 379  0x00 E5 09 : Total detect 58633 activity since end node start.
380 380  
381 381  
378 +
382 382  == 2.6 Show data on Datacake ==
383 383  
384 384  
... ... @@ -408,11 +408,195 @@
408 408  
409 409  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20221224161957-6.png||height="306" width="852"]]
410 410  
408 +== 2.7 Alarm Mode & Feature "Multi sampling, one uplink" ==
411 411  
412 412  
413 -== 2.7 LED Indicator ==
411 +(((
412 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
413 +)))
414 414  
415 +(((
416 +(% style="color:red" %)**Note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.**
415 415  
418 +
419 +=== 2.7.1 ALARM MODE ( Since v1.3.1 firmware) ===
420 +
421 +
422 +**Internal GXHT30 temperature alarm(Acquisition time: fixed at one minute)**
423 +
424 +(((
425 +(% class="box infomessage" %)
426 +(((
427 +**AT+WMOD=3**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
428 +
429 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
430 +
431 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
432 +
433 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
434 +
435 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
436 +
437 +**AT+LEDALARM=1** :       Enable LED visual Alarm.
438 +)))
439 +)))
440 +
441 +(% style="color:#4f81bd" %)**Downlink Command:**
442 +
443 +AT+WMOD=1:  A501  , AT+WMOD=0 :  A600
444 +
445 +AT+CITEMP=1 : A60001
446 +
447 +AT+ARTEMP=1,60  :  A70001003C
448 +
449 +AT+ARTEMP=-16,60 :  A7FFF0003C
450 +
451 +AT+LEDALARM=1  :  3601
452 +
453 +
454 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
455 +
456 +Total bytes: 8 bytes
457 +
458 +**Example: **AA0100010001003C
459 +
460 +WMOD=01
461 +
462 +CITEMP=0001
463 +
464 +TEMPlow=0001
465 +
466 +TEMPhigh=003C
467 +
468 +
469 +**DS18B20 and TMP117 Threshold Alarm**
470 +
471 +**~ AT+WMOD=1,60,-10,20**
472 +
473 +(% style="color:#4f81bd" %)**Downlink Command:**
474 +
475 +**Example: **A5013CFC180014
476 +
477 +MOD=01
478 +
479 +CITEMP=3C(S)
480 +
481 +TEMPlow=FC18
482 +
483 +TEMPhigh=0014
484 +
485 +
486 +**Fluctuation alarm for DS18B20 and TMP117(Acquisition time: minimum 1s)**
487 +
488 +**AT+WMOD=2,60,5** 
489 +
490 +(% style="color:#4f81bd" %)**Downlink Command:**
491 +
492 +**Example: **A5023C05
493 +
494 +MOD=02
495 +
496 +CITEMP=3C(S)
497 +
498 +temperature fluctuation=05
499 +
500 +
501 +**Sampling multiple times and uplink together**
502 +
503 +**AT+WMOD=3,1,60,20,-16,32,1**   
504 +
505 +Explain:
506 +
507 +* (% style="color:#037691" %)**parameter1: **(%%)Set Working Mode to **Mode 3**
508 +* (% style="color:#037691" %)**parameter2:**(%%) Set the temperature sampling mode to** 1**(1:DS18B20;2:TMP117;3:** **Internal GXHT30).
509 +* (% style="color:#037691" %)**parameter3: **(%%)Sampling Interval is **60**s.
510 +* (% style="color:#037691" %)**parameter4: **(%%)When there is **20** sampling dats, Device will send these data via one uplink. (max value is 60, means max 60 sampling in one uplink)
511 +* (% style="color:#037691" %)**parameter5 & parameter6: **(%%)Temperature alarm range is **-16** to **32**°C,
512 +* (% style="color:#037691" %)**parameter7:**(%%) 1 to enable temperature alarm, **0** to disable the temperature alarm. If alarm is enabled, a data will be sent immediately  if temperate exceeds the Alarm range.
513 +
514 +(% style="color:#4f81bd" %)**Downlink Command:**
515 +
516 +**Example: **A50301003C14FFF0002001
517 +
518 +MOD=03
519 +
520 +TEMP=DS18B20
521 +
522 +CITEMP=003C(S)
523 +
524 +Total number of acquisitions=14
525 +
526 +TEMPlow=FFF0
527 +
528 +TEMPhigh=0020
529 +
530 +ARTEMP=01
531 +
532 +
533 +**Uplink payload( Fport=3)**
534 +
535 +**Example: CBEA**01**0992**//0A41//**09C4**
536 +
537 +BatV=CBEA
538 +
539 +TEMP=DS18B20
540 +
541 +Temp1=0992  ~/~/ 24.50℃
542 +
543 +Temp2=0A41  ~/~/ 26.25℃
544 +
545 +Temp3=09C4  ~/~/ 25.00℃
546 +
547 +(% style="color:red" %)**Note: This uplink will automatically select the appropriate DR according to the data length**
548 +
549 +(% style="color:red" %)** In this mode, the temperature resolution of ds18b20 is 0.25℃ to save power consumption**
550 +)))
551 +
552 +
553 +=== 2.7.2 ALARM MODE ( Before v1.3.1 firmware) ===
554 +
555 +
556 +(% class="box infomessage" %)
557 +(((
558 +(((
559 +**AT+WMOD=1**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
560 +)))
561 +
562 +(((
563 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
564 +)))
565 +
566 +(((
567 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
568 +)))
569 +
570 +(((
571 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
572 +)))
573 +
574 +(((
575 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
576 +)))
577 +)))
578 +
579 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
580 +
581 +Total bytes: 8 bytes
582 +
583 +**Example:**AA0100010001003C
584 +
585 +WMOD=01
586 +
587 +CITEMP=0001
588 +
589 +TEMPlow=0001
590 +
591 +TEMPhigh=003C
592 +
593 +
594 +== 2.8 LED Indicator ==
595 +
596 +
416 416  The LHT65N-PIR has a triple color LED which for easy showing different stage .
417 417  
418 418  While user press ACT button, the LED will work as per LED status with ACT button.
... ... @@ -424,7 +424,7 @@
424 424  * (% style="color:red" %)**RED LED**(%%) when external sensor is not connected
425 425  * For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once
426 426  
427 -== 2.8 installation ==
608 +== 2.9 installation ==
428 428  
429 429  
430 430  ~1. Don't install LHT65N-PIR outdoor or place where will get wet.
... ... @@ -503,11 +503,11 @@
503 503  
504 504  Feature: Change LoRaWAN End Node Transmit Interval.
505 505  
506 -(% style="color:#4f81bd" %)**AT Command: AT+TDC**
687 +(% style="color:#4f81bd" %)**AT Command: **
507 507  
508 508  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:501px" %)
509 509  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:166px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:180px" %)**Response**
510 -|(% style="width:155px" %)AT+TDC?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
691 +|(% style="width:155px" %)AT+TDC=?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
511 511  |(% style="width:155px" %)AT+TDC=60000|(% style="width:162px" %)Set Transmit Interval|(% style="width:177px" %)OK Set transmit interval to 60000ms = 60 seconds
512 512  
513 513  (% style="color:#4f81bd" %)**Downlink Payload: 0x01**
... ... @@ -535,7 +535,7 @@
535 535  
536 536  Feature: Set device password, max 9 digits
537 537  
538 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
719 +(% style="color:#4f81bd" %)**AT Command: **
539 539  
540 540  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:372px" %)
541 541  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:128px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**Response**
... ... @@ -556,11 +556,11 @@
556 556  
557 557  Feature: Set device to sleep mode
558 558  
559 -* **AT+Sleep=0**  : Normal working mode, device will sleep and use lower power when there is no LoRa message
740 +* (% style="color:#037691" %)**AT+Sleep=0**(%%)  : Normal working mode, device will sleep and use lower power when there is no LoRa message
560 560  
561 -* **AT+Sleep=1** :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
742 +* (% style="color:#037691" %)**AT+Sleep=1**(%%) :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
562 562  
563 -(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
744 +(% style="color:#4f81bd" %)**AT Command: **
564 564  
565 565  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:513px" %)
566 566  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:218px" %)**Response**
... ... @@ -579,18 +579,24 @@
579 579  
580 580  Feature: Enable / Disable Uplink on Activity
581 581  
582 -* **AT+UOA=0**  : Disable UoA
763 +(% style="color:#4f81bd" %)**AT Command: **
583 583  
584 -* **AT+UOA=1,2** :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
765 +* (% style="color:#037691" %)**AT+UOA=0**(%%)  : Disable UoA
585 585  
767 +* (% style="color:#037691" %)**AT+UOA=1,2**(%%) :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
768 +
586 586  (% style="color:red" %)**Notice: Calm Down time range is 1 ~~ 65535 minutes. If user set Calm Down time to low value, such as 1 minute, the sensor might send uplink very frequenctly and battery drain fast.**
587 587  
588 -(% style="color:#4f81bd" %)**AT Command: AT+UOA**
589 589  
772 +(% style="color:#4f81bd" %)**Downlink Command:**
590 590  
591 -(% style="color:#4f81bd" %)**Downlink Command:  **(% class="mark" %)**xxxxxxx**
774 +Format: Command Code (0xA1) followed by 1 byte or 3 bytes.
592 592  
776 +When followed by 3 bytes, the first byte is 01, and the second and third bytes are Calm Down Time.
593 593  
778 +* (% style="color:#037691" %)**A1 00    **(%%)** ==>  AT+UOA=0     **
779 +* (% style="color:#037691" %)**A1 01 00 02  **(%%)** ==>  AT+UOA=1,2**
780 +
594 594  = 5. Battery & Power Consumption =
595 595  
596 596  
... ... @@ -626,7 +626,6 @@
626 626  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
627 627  
628 628  
629 -
630 630  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@1655802313617-381.png||_mstalt="293917"]]
631 631  
632 632  
... ... @@ -687,10 +687,12 @@
687 687  
688 688  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
689 689  
876 +
690 690  (% style="color:blue" %)**Step1**(%%): Install TremoProgrammer  first.
691 691  
692 692  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615170542-5.png||_mstalt="430638"]]
693 693  
881 +
694 694  (% _mstmutation="1" style="color:blue" %)**Step2**(%%)：wiring method.(% style="display:none" %)
695 695  
696 696  First connect the four lines；(% style="display:none" %)
... ... @@ -703,7 +703,6 @@
703 703  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220621170938-2.png||_mstalt="431704"]]
704 704  
705 705  
706 -
707 707  (% style="color:blue" %)**Step3：**(%%)Select the device port to be connected, baud rate and bin file to be downloaded.
708 708  
709 709  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615171334-6.png||_mstalt="431028"]]
... ... @@ -719,8 +719,6 @@
719 719  
720 720  Finally, unplug the DuPont cable on port4, and then use the DuPont cable to short circuit port3 and port1 to reset the device.
721 721  
722 -
723 -
724 724  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
725 725  
726 726  
... ... @@ -747,11 +747,6 @@
747 747  
748 748  * LHT65N-PIR Temperature/Humidity/PIR Sensor x 1
749 749  
750 -**Dimension and weight**:
751 -
752 -* Device Size:  10 x 10 x 3.5 mm
753 -* Device Weight: 120.5g
754 -
755 755  = 10. Reference material =
756 756  
757 757