Skip to Content
Last modified by Xiaoling on 2025/06/10 09:17
From version 45.3
edited by Xiaoling
on 2023/05/27 08:43
Change comment: There is no comment for this version
To version 50.1
edited by Edwin Chen
on 2024/01/28 20:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -43,8 +43,10 @@
43 43  * Built-in 2400mAh battery for up to 5 years of use.
44 44  * Built-in Temperature & Humidity sensor
45 45  * External PIR Sensor
46 -* Tri-color LED to indicate working status(% style="display:none" %)
46 +* Tri-color LED to indicate working status
47 47  
48 +(% style="display:none" %)
49 +
48 48  == 1.3 Specification ==
49 49  
50 50  
... ... @@ -94,15 +94,19 @@
94 94  
95 95  
96 96  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
97 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
99 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
98 98  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Test uplink status|(% style="background-color:#f2f2f2; width:225px" %)(((
99 -If LHT65N is already Joined to rhe LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
101 +
102 +
103 +If LHT65N-PIR is already Joined to rhe LoRaWAN network, LHT65N-PIR will send an uplink packet, if LHT65N-PIR has external sensor connected,Blue led will blink once. If LHT65N-PIR has not external sensor, Red led will blink once.
100 100  )))
101 101  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
102 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network.
103 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after join in network.
106 +
107 +
108 +Green led will fast blink 5 times, LHT65N-PIR will enter working mode and start to JOIN LoRaWAN network.
109 +Green led will solidly turn on for 5 seconds after join in network.
104 104  )))
105 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N is in Deep Sleep Mode.
111 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)Red led will solid on for 5 seconds. Means LHT65N-PIR is in Deep Sleep Mode.
106 106  
107 107  == 2.3 Example to join LoRaWAN network ==
108 108  
... ... @@ -159,10 +159,10 @@
159 159  Use ACT button to activate LHT65N-PIR and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
160 160  
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N-E5%20LoRaWAN%20Temperature_Humidity%20%26%20Illuminance%20Sensor%20User%20Manual/WebHome/image-20220522233300-8.png?rev=1.1||alt="image-20220522233300-8.png"]]
168 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N-E5%20LoRaWAN%20Temperature_Humidity%20%26%20Illuminance%20Sensor%20User%20Manual/WebHome/image-20220522233300-8.png?rev=1.1||alt="image-20220522233300-8.png" height="378" width="1248"]]
163 163  
164 164  
165 -== 2.4 Uplink Payload~-~-Device Status, (Fport~=5) ==
171 +== 2.4 Uplink Payload~-~-Device Status, (Fport~=5)(% style="display:none" %) (%%) ==
166 166  
167 167  
168 168  Users can use the downlink command(**0x26 01**) to ask LHT65N-PIR to send device configure detail, include device configure status. LHT65N-PIR will uplink a payload via FPort=5 to server.
... ... @@ -170,13 +170,13 @@
170 170  The Payload format is as below.
171 171  
172 172  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
173 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
179 +|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
174 174  |(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
175 -|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
181 +|(% style="background-color:#f2f2f2; width:103px" %)Value|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
176 176  
177 177  Example parse in TTNv3
178 178  
179 -[[image:image-20230508151932-1.png]]
185 +[[image:image-20230508151932-1.png||height="213" width="1245"]]
180 180  
181 181  
182 182  (% style="color:blue" %)**Sensor Model**(%%): For LHT65N-PIR, this value is 0x1A
... ... @@ -185,42 +185,44 @@
185 185  
186 186  (% style="color:blue" %)**Frequency Band**:
187 187  
188 -*0x01: EU868
194 +0x01: EU868
189 189  
190 -*0x02: US915
196 +0x02: US915
191 191  
192 -*0x03: IN865
198 +0x03: IN865
193 193  
194 -*0x04: AU915
200 +0x04: AU915
195 195  
196 -*0x05: KZ865
202 +0x05: KZ865
197 197  
198 -*0x06: RU864
204 +0x06: RU864
199 199  
200 -*0x07: AS923
206 +0x07: AS923
201 201  
202 -*0x08: AS923-1
208 +0x08: AS923-1
203 203  
204 -*0x09: AS923-2
210 +0x09: AS923-2
205 205  
206 -*0x0a: AS923-3
212 +0x0a: AS923-3
207 207  
208 -*0x0b: CN470
214 +0x0b: CN470
209 209  
210 -*0x0c: EU433
216 +0x0c: EU433
211 211  
212 -*0x0d: KR920
218 +0x0d: KR920
213 213  
214 -*0x0e: MA869
220 +0x0e: MA869
215 215  
222 +
216 216  (% style="color:blue" %)**Sub-Band**:
217 217  
218 -AU915 and US915:value 0x00 ~~ 0x08
225 +AU915 and US915: value 0x00 ~~ 0x08
219 219  
220 220  CN470: value 0x0B ~~ 0x0C
221 221  
222 222  Other Bands: Always 0x00
223 223  
231 +
224 224  (% style="color:blue" %)**Battery Info**:
225 225  
226 226  Check the battery voltage.
... ... @@ -238,21 +238,21 @@
238 238  After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
239 239  
240 240  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:390px" %)
241 -|=(% style="width: 60px;background-color:#D9E2F3" %)(((
249 +|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
242 242  **Size(bytes)**
243 -)))|=(% style="width: 30px;background-color:#D9E2F3" %)(((
251 +)))|=(% style="width: 30px;background-color:#4F81BD;color:white" %)(((
244 244  **2**
245 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
253 +)))|=(% style="width: 100px;background-color:#4F81BD;color:white" %)(((
246 246  **2**
247 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
255 +)))|=(% style="width: 100px;background-color:#4F81BD;color:white" %)(((
248 248  **2**
249 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
257 +)))|=(% style="width: 50px;background-color:#4F81BD;color:white" %)(((
250 250  **1**
251 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
259 +)))|=(% style="width: 50px;background-color:#4F81BD;color:white" %)(((
252 252  **4**
253 253  )))
254 254  |(% style="width:97px" %)(((
255 -**Value**
263 +Value
256 256  )))|(% style="width:39px" %)(((
257 257  [[BAT>>||anchor="H2.5.2BAT-BatteryInfo"]]
258 258  )))|(% style="width:100px" %)(((
... ... @@ -291,11 +291,11 @@
291 291  These two bytes of BAT include the battery state and the actually voltage
292 292  
293 293  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:477px" %)
294 -|=(% style="width: 69px; background-color:#D9E2F3;color:#0070C0" %)(((
302 +|=(% style="width: 69px; background-color:#4F81BD;color:white" %)(((
295 295  **Bit(bit)**
296 -)))|=(% style="width: 253px;background-color:#D9E2F3;color:#0070C0" %)[15:14]|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)[13:0]
304 +)))|=(% style="width: 253px;background-color:#4F81BD;color:white" %)[15:14]|=(% style="width: 155px;background-color:#4F81BD;color:white" %)[13:0]
297 297  |(% style="width:66px" %)(((
298 -**Value**
306 +Value
299 299  )))|(% style="width:250px" %)(((
300 300  BAT Status
301 301  00(b): Ultra Low ( BAT <= 2.50v)
... ... @@ -314,6 +314,7 @@
314 314  
315 315  === 2.5.3 Built-in Temperature ===
316 316  
325 +
317 317  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-2.png||_mstalt="431756" height="138" width="722"]]
318 318  
319 319  * Temperature:  0x0ABB/100=27.47℃
... ... @@ -324,6 +324,7 @@
324 324  
325 325  === 2.5.4 Built-in Humidity ===
326 326  
336 +
327 327  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-4.png||_mstalt="432484" height="138" width="722"]]
328 328  
329 329  * Humidity:    0x025C/10=60.4%
... ... @@ -333,7 +333,7 @@
333 333  ==== 2.5.5.1 Ext~=0x0E, PIR Sensor ====
334 334  
335 335  
336 -[[image:ext=14.png||alt="image-20221224161634-2.png"]]
346 +[[image:ext=14.png||alt="image-20221224161634-2.png" height="166" width="1252"]]
337 337  
338 338  
339 339  ==== 2.5.5.2 Ext Value ====
... ... @@ -344,15 +344,15 @@
344 344  Bit0 of byte 8th shows if this uplink is generate by PIR activity.
345 345  
346 346  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:393px" %)
347 -|=(% style="width: 107px; background-color:#D9E2F3;color:#0070C0" %)(((
357 +|=(% style="width: 107px; background-color:#4F81BD;color:white" %)(((
348 348  **The 8^^th^^ byte**
349 -)))|=(% style="width: 73px; background-color:#D9E2F3;color:#0070C0" %)(((
359 +)))|=(% style="width: 73px; background-color:#4F81BD;color:white" %)(((
350 350  **Bit 1~~7**
351 -)))|=(% style="width: 213px; background-color:#D9E2F3;color:#0070C0" %)(((
361 +)))|=(% style="width: 213px; background-color:#4F81BD;color:white" %)(((
352 352  **Bit 0**
353 353  )))
354 354  |(% style="width:106px" %)(((
355 -**Value**
365 +Value
356 356  )))|(% style="width:71px" %)(((
357 357  Reserve
358 358  )))|(% style="width:211px" %)(((
... ... @@ -398,11 +398,195 @@
398 398  
399 399  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20221224161957-6.png||height="306" width="852"]]
400 400  
411 +== 2.7 Alarm Mode & Feature "Multi sampling, one uplink" ==
401 401  
402 402  
403 -== 2.7 LED Indicator ==
414 +(((
415 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
416 +)))
404 404  
418 +(((
419 +(% style="color:red" %)**Note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.**
405 405  
421 +
422 +=== 2.7.1 ALARM MODE ( Since v1.3.1 firmware) ===
423 +
424 +
425 +**Internal GXHT30 temperature alarm(Acquisition time: fixed at one minute)**
426 +
427 +(((
428 +(% class="box infomessage" %)
429 +(((
430 +**AT+WMOD=3**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
431 +
432 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
433 +
434 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
435 +
436 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
437 +
438 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
439 +
440 +**AT+LEDALARM=1** :       Enable LED visual Alarm.
441 +)))
442 +)))
443 +
444 +(% style="color:#4f81bd" %)**Downlink Command:**
445 +
446 +AT+WMOD=1:  A501  , AT+WMOD=0 :  A600
447 +
448 +AT+CITEMP=1 : A60001
449 +
450 +AT+ARTEMP=1,60  :  A70001003C
451 +
452 +AT+ARTEMP=-16,60 :  A7FFF0003C
453 +
454 +AT+LEDALARM=1  :  3601
455 +
456 +
457 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
458 +
459 +Total bytes: 8 bytes
460 +
461 +**Example: **AA0100010001003C
462 +
463 +WMOD=01
464 +
465 +CITEMP=0001
466 +
467 +TEMPlow=0001
468 +
469 +TEMPhigh=003C
470 +
471 +
472 +**DS18B20 and TMP117 Threshold Alarm**
473 +
474 +**~ AT+WMOD=1,60,-10,20**
475 +
476 +(% style="color:#4f81bd" %)**Downlink Command:**
477 +
478 +**Example: **A5013CFC180014
479 +
480 +MOD=01
481 +
482 +CITEMP=3C(S)
483 +
484 +TEMPlow=FC18
485 +
486 +TEMPhigh=0014
487 +
488 +
489 +**Fluctuation alarm for DS18B20 and TMP117(Acquisition time: minimum 1s)**
490 +
491 +**AT+WMOD=2,60,5** 
492 +
493 +(% style="color:#4f81bd" %)**Downlink Command:**
494 +
495 +**Example: **A5023C05
496 +
497 +MOD=02
498 +
499 +CITEMP=3C(S)
500 +
501 +temperature fluctuation=05
502 +
503 +
504 +**Sampling multiple times and uplink together**
505 +
506 +**AT+WMOD=3,1,60,20,-16,32,1**   
507 +
508 +Explain:
509 +
510 +* (% style="color:#037691" %)**parameter1: **(%%)Set Working Mode to **Mode 3**
511 +* (% style="color:#037691" %)**parameter2:**(%%) Set the temperature sampling mode to** 1**(1:DS18B20;2:TMP117;3:** **Internal GXHT30).
512 +* (% style="color:#037691" %)**parameter3: **(%%)Sampling Interval is **60**s.
513 +* (% style="color:#037691" %)**parameter4: **(%%)When there is **20** sampling dats, Device will send these data via one uplink. (max value is 60, means max 60 sampling in one uplink)
514 +* (% style="color:#037691" %)**parameter5 & parameter6: **(%%)Temperature alarm range is **-16** to **32**°C,
515 +* (% style="color:#037691" %)**parameter7:**(%%) 1 to enable temperature alarm, **0** to disable the temperature alarm. If alarm is enabled, a data will be sent immediately  if temperate exceeds the Alarm range.
516 +
517 +(% style="color:#4f81bd" %)**Downlink Command:**
518 +
519 +**Example: **A50301003C14FFF0002001
520 +
521 +MOD=03
522 +
523 +TEMP=DS18B20
524 +
525 +CITEMP=003C(S)
526 +
527 +Total number of acquisitions=14
528 +
529 +TEMPlow=FFF0
530 +
531 +TEMPhigh=0020
532 +
533 +ARTEMP=01
534 +
535 +
536 +**Uplink payload( Fport=3)**
537 +
538 +**Example: CBEA**01**0992**//0A41//**09C4**
539 +
540 +BatV=CBEA
541 +
542 +TEMP=DS18B20
543 +
544 +Temp1=0992  ~/~/ 24.50℃
545 +
546 +Temp2=0A41  ~/~/ 26.25℃
547 +
548 +Temp3=09C4  ~/~/ 25.00℃
549 +
550 +(% style="color:red" %)**Note: This uplink will automatically select the appropriate DR according to the data length**
551 +
552 +(% style="color:red" %)** In this mode, the temperature resolution of ds18b20 is 0.25℃ to save power consumption**
553 +)))
554 +
555 +
556 +=== 2.7.2 ALARM MODE ( Before v1.3.1 firmware) ===
557 +
558 +
559 +(% class="box infomessage" %)
560 +(((
561 +(((
562 +**AT+WMOD=1**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
563 +)))
564 +
565 +(((
566 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
567 +)))
568 +
569 +(((
570 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
571 +)))
572 +
573 +(((
574 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
575 +)))
576 +
577 +(((
578 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
579 +)))
580 +)))
581 +
582 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
583 +
584 +Total bytes: 8 bytes
585 +
586 +**Example:**AA0100010001003C
587 +
588 +WMOD=01
589 +
590 +CITEMP=0001
591 +
592 +TEMPlow=0001
593 +
594 +TEMPhigh=003C
595 +
596 +
597 +== 2.8 LED Indicator ==
598 +
599 +
406 406  The LHT65N-PIR has a triple color LED which for easy showing different stage .
407 407  
408 408  While user press ACT button, the LED will work as per LED status with ACT button.
... ... @@ -414,7 +414,7 @@
414 414  * (% style="color:red" %)**RED LED**(%%) when external sensor is not connected
415 415  * For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once
416 416  
417 -== 2.8 installation ==
611 +== 2.9 installation ==
418 418  
419 419  
420 420  ~1. Don't install LHT65N-PIR outdoor or place where will get wet.
... ... @@ -493,11 +493,11 @@
493 493  
494 494  Feature: Change LoRaWAN End Node Transmit Interval.
495 495  
496 -(% style="color:#4f81bd" %)**AT Command: AT+TDC**
690 +(% style="color:#4f81bd" %)**AT Command: **
497 497  
498 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:501px" %)
499 -|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:166px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:180px" %)**Response**
500 -|(% style="width:155px" %)AT+TDC?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
692 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:501px" %)
693 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Response**
694 +|(% style="width:155px" %)AT+TDC=?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
501 501  |(% style="width:155px" %)AT+TDC=60000|(% style="width:162px" %)Set Transmit Interval|(% style="width:177px" %)OK Set transmit interval to 60000ms = 60 seconds
502 502  
503 503  (% style="color:#4f81bd" %)**Downlink Payload: 0x01**
... ... @@ -525,10 +525,10 @@
525 525  
526 526  Feature: Set device password, max 9 digits
527 527  
528 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
722 +(% style="color:#4f81bd" %)**AT Command: **
529 529  
530 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:372px" %)
531 -|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:128px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**Response**
724 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:372px" %)
725 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
532 532  |(% style="width:155px" %)AT+PWORD=?|(% style="width:124px" %)Show password|(% style="width:86px" %)(((
533 533  123456
534 534  
... ... @@ -546,14 +546,14 @@
546 546  
547 547  Feature: Set device to sleep mode
548 548  
549 -* **AT+Sleep=0**  : Normal working mode, device will sleep and use lower power when there is no LoRa message
743 +* (% style="color:#037691" %)**AT+Sleep=0**(%%)  : Normal working mode, device will sleep and use lower power when there is no LoRa message
550 550  
551 -* **AT+Sleep=1** :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
745 +* (% style="color:#037691" %)**AT+Sleep=1**(%%) :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
552 552  
553 -(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
747 +(% style="color:#4f81bd" %)**AT Command: **
554 554  
555 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:513px" %)
556 -|(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:218px" %)**Response**
749 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:513px" %)
750 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:218px" %)**Response**
557 557  |(% style="width:155px" %)AT+SLEEP|(% style="width:139px" %)Set to sleep mode|(% style="width:213px" %)(((
558 558  Clear all stored sensor data…
559 559  
... ... @@ -569,18 +569,34 @@
569 569  
570 570  Feature: Enable / Disable Uplink on Activity
571 571  
572 -* **AT+UOA=0**  : Disable UoA
766 +(% style="color:#4f81bd" %)**AT Command: **
573 573  
574 -* **AT+UOA=1,2** :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
768 +* (% style="color:#037691" %)**AT+UOA=0**(%%)  : Disable UoA
575 575  
770 +* (% style="color:#037691" %)**AT+UOA=1,2**(%%) :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
771 +
576 576  (% style="color:red" %)**Notice: Calm Down time range is 1 ~~ 65535 minutes. If user set Calm Down time to low value, such as 1 minute, the sensor might send uplink very frequenctly and battery drain fast.**
577 577  
578 -(% style="color:#4f81bd" %)**AT Command: AT+UOA**
579 579  
775 +(% style="color:#4f81bd" %)**Downlink Command:**
580 580  
581 -(% style="color:#4f81bd" %)**Downlink Command:  **(% class="mark" %)**xxxxxxx**
777 +Format: Command Code (0xA1) followed by 1 byte or 3 bytes.
582 582  
779 +When followed by 3 bytes, the first byte is 01, and the second and third bytes are Calm Down Time.
583 583  
781 +* (% style="color:#037691" %)**A1 00    **(%%)** ==>    **AT+UOA=0**     **
782 +* (% style="color:#037691" %)**A1 01 00 02  **(%%)** ==>    **AT+UOA=1,2
783 +
784 +=== 4.3.6 Get data ===
785 +
786 +
787 +Feature: Get the current sensor data
788 +
789 +(% style="color:#4f81bd" %)**AT Command:**
790 +
791 +* **AT+GETSENSORVALUE=0**      ~/~/ The serial port gets the reading of the current sensor
792 +* **AT+GETSENSORVALUE=1**      ~/~/  The serial port gets the current sensor reading and uploads it.
793 +
584 584  = 5. Battery & Power Consumption =
585 585  
586 586  
... ... @@ -598,7 +598,7 @@
598 598  * Update with new features.
599 599  * Fix bugs.
600 600  
601 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
811 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/g99v0fxcltn9r1y/AAB_TCg_9QRfMlVYDReneEJCa/LHT65N?dl=0&subfolder_nav_tracking=1]]**
602 602  
603 603  Methods to Update Firmware:
604 604  
... ... @@ -609,17 +609,8 @@
609 609  
610 610  == 7.1 How to use AT Command? ==
611 611  
822 +Refer this link for [[UART Hardware Connection>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H6.1HowtoconnecttoLHT65NUARTinterface3F]].
612 612  
613 -LHT65N-PIR supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
614 -
615 -
616 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
617 -
618 -
619 -
620 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@1655802313617-381.png||_mstalt="293917"]]
621 -
622 -
623 623  In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N-PIR. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(% style="color:red" %))(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
624 624  
625 625  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
... ... @@ -672,48 +672,11 @@
672 672  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
673 673  
674 674  
675 -== 7.4 How to use TTL-USB to connect PC to upgrade firmware? ==
876 +== 7.4 How to upgrade firmware? ==
676 676  
878 +Please check [[update instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H6.5Howtoupgradefirmware3F]].
677 677  
678 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
679 679  
680 -(% style="color:blue" %)**Step1**(%%): Install TremoProgrammer  first.
681 -
682 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615170542-5.png||_mstalt="430638"]]
683 -
684 -(% _mstmutation="1" style="color:blue" %)**Step2**(%%)：wiring method.(% style="display:none" %)
685 -
686 -First connect the four lines；(% style="display:none" %)
687 -
688 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220621170938-1.png||_mstalt="431340" height="413" width="419"]]，(% style="display:none" %)
689 -
690 -
691 -Then use DuPont cable to short circuit port3 and port1, and then release them, so that the device enters bootlaod mode.
692 -
693 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220621170938-2.png||_mstalt="431704"]]
694 -
695 -
696 -
697 -(% style="color:blue" %)**Step3：**(%%)Select the device port to be connected, baud rate and bin file to be downloaded.
698 -
699 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615171334-6.png||_mstalt="431028"]]
700 -
701 -
702 -Click the (% style="color:blue" %)**start**(%%) button to start the firmware upgrade.
703 -
704 -
705 -When this interface appears, it indicates that the download has been completed.
706 -
707 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220620160723-8.png||_mstalt="430703"]]
708 -
709 -
710 -Finally, unplug the DuPont cable on port4, and then use the DuPont cable to short circuit port3 and port1 to reset the device.
711 -
712 -
713 -
714 -[[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
715 -
716 -
717 717  = 8. Order Info =
718 718  
719 719  
... ... @@ -737,11 +737,6 @@
737 737  
738 738  * LHT65N-PIR Temperature/Humidity/PIR Sensor x 1
739 739  
740 -**Dimension and weight**:
741 -
742 -* Device Size:  10 x 10 x 3.5 mm
743 -* Device Weight: 120.5g
744 -
745 745  = 10. Reference material =
746 746  
747 747