Skip to Content
Last modified by Xiaoling on 2025/06/10 09:17
From version 45.3
edited by Xiaoling
on 2023/05/27 08:43
Change comment: There is no comment for this version
To version 48.1
edited by Mengting Qiu
on 2024/01/16 17:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.ting
Content
... ... @@ -43,8 +43,11 @@
43 43  * Built-in 2400mAh battery for up to 5 years of use.
44 44  * Built-in Temperature & Humidity sensor
45 45  * External PIR Sensor
46 -* Tri-color LED to indicate working status(% style="display:none" %)
46 +* Tri-color LED to indicate working status
47 47  
48 +
49 +(% style="display:none" %)
50 +
48 48  == 1.3 Specification ==
49 49  
50 50  
... ... @@ -68,6 +68,7 @@
68 68  * Cable Length : 1 meter
69 69  * Stable detect distance : 0~~3 meter
70 70  
74 +
71 71  = 2. Connect LHT65N-PIR to IoT Server =
72 72  
73 73  == 2.1 How does LHT65N-PIR work? ==
... ... @@ -94,16 +94,21 @@
94 94  
95 95  
96 96  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
97 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
101 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on **ACT|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)Function|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)Action
98 98  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Test uplink status|(% style="background-color:#f2f2f2; width:225px" %)(((
99 -If LHT65N is already Joined to rhe LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
103 +
104 +
105 +If LHT65N-PIR is already Joined to rhe LoRaWAN network, LHT65N-PIR will send an uplink packet, if LHT65N-PIR has external sensor connected,Blue led will blink once. If LHT65N-PIR has not external sensor, Red led will blink once.
100 100  )))
101 101  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
102 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network.
103 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after join in network.
108 +
109 +
110 +Green led will fast blink 5 times, LHT65N-PIR will enter working mode and start to JOIN LoRaWAN network.
111 +Green led will solidly turn on for 5 seconds after join in network.
104 104  )))
105 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N is in Deep Sleep Mode.
113 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)Red led will solid on for 5 seconds. Means LHT65N-PIR is in Deep Sleep Mode.
106 106  
115 +
107 107  == 2.3 Example to join LoRaWAN network ==
108 108  
109 109  
... ... @@ -159,10 +159,10 @@
159 159  Use ACT button to activate LHT65N-PIR and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
160 160  
161 161  
162 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N-E5%20LoRaWAN%20Temperature_Humidity%20%26%20Illuminance%20Sensor%20User%20Manual/WebHome/image-20220522233300-8.png?rev=1.1||alt="image-20220522233300-8.png"]]
171 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N-E5%20LoRaWAN%20Temperature_Humidity%20%26%20Illuminance%20Sensor%20User%20Manual/WebHome/image-20220522233300-8.png?rev=1.1||alt="image-20220522233300-8.png" height="378" width="1248"]]
163 163  
164 164  
165 -== 2.4 Uplink Payload~-~-Device Status, (Fport~=5) ==
174 +== 2.4 Uplink Payload~-~-Device Status, (Fport~=5)(% style="display:none" %) (%%) ==
166 166  
167 167  
168 168  Users can use the downlink command(**0x26 01**) to ask LHT65N-PIR to send device configure detail, include device configure status. LHT65N-PIR will uplink a payload via FPort=5 to server.
... ... @@ -176,7 +176,7 @@
176 176  
177 177  Example parse in TTNv3
178 178  
179 -[[image:image-20230508151932-1.png]]
188 +[[image:image-20230508151932-1.png||height="213" width="1245"]]
180 180  
181 181  
182 182  (% style="color:blue" %)**Sensor Model**(%%): For LHT65N-PIR, this value is 0x1A
... ... @@ -185,42 +185,44 @@
185 185  
186 186  (% style="color:blue" %)**Frequency Band**:
187 187  
188 -*0x01: EU868
197 +0x01: EU868
189 189  
190 -*0x02: US915
199 +0x02: US915
191 191  
192 -*0x03: IN865
201 +0x03: IN865
193 193  
194 -*0x04: AU915
203 +0x04: AU915
195 195  
196 -*0x05: KZ865
205 +0x05: KZ865
197 197  
198 -*0x06: RU864
207 +0x06: RU864
199 199  
200 -*0x07: AS923
209 +0x07: AS923
201 201  
202 -*0x08: AS923-1
211 +0x08: AS923-1
203 203  
204 -*0x09: AS923-2
213 +0x09: AS923-2
205 205  
206 -*0x0a: AS923-3
215 +0x0a: AS923-3
207 207  
208 -*0x0b: CN470
217 +0x0b: CN470
209 209  
210 -*0x0c: EU433
219 +0x0c: EU433
211 211  
212 -*0x0d: KR920
221 +0x0d: KR920
213 213  
214 -*0x0e: MA869
223 +0x0e: MA869
215 215  
225 +
216 216  (% style="color:blue" %)**Sub-Band**:
217 217  
218 -AU915 and US915:value 0x00 ~~ 0x08
228 +AU915 and US915: value 0x00 ~~ 0x08
219 219  
220 220  CN470: value 0x0B ~~ 0x0C
221 221  
222 222  Other Bands: Always 0x00
223 223  
234 +
224 224  (% style="color:blue" %)**Battery Info**:
225 225  
226 226  Check the battery voltage.
... ... @@ -238,21 +238,21 @@
238 238  After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
239 239  
240 240  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:390px" %)
241 -|=(% style="width: 60px;background-color:#D9E2F3" %)(((
252 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
242 242  **Size(bytes)**
243 -)))|=(% style="width: 30px;background-color:#D9E2F3" %)(((
254 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)(((
244 244  **2**
245 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
256 +)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)(((
246 246  **2**
247 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
258 +)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)(((
248 248  **2**
249 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
260 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
250 250  **1**
251 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
262 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
252 252  **4**
253 253  )))
254 254  |(% style="width:97px" %)(((
255 -**Value**
266 +Value
256 256  )))|(% style="width:39px" %)(((
257 257  [[BAT>>||anchor="H2.5.2BAT-BatteryInfo"]]
258 258  )))|(% style="width:100px" %)(((
... ... @@ -274,6 +274,7 @@
274 274  * The 8^^th^^ byte: Alarm Bit (if this uplink is from periodically or movement)
275 275  * The 9^^th^^ ~~ 11^^st^^  byte: Movement Detect Count.
276 276  
288 +
277 277  === 2.5.1 Decoder in TTN V3 ===
278 278  
279 279  
... ... @@ -295,7 +295,7 @@
295 295  **Bit(bit)**
296 296  )))|=(% style="width: 253px;background-color:#D9E2F3;color:#0070C0" %)[15:14]|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)[13:0]
297 297  |(% style="width:66px" %)(((
298 -**Value**
310 +Value
299 299  )))|(% style="width:250px" %)(((
300 300  BAT Status
301 301  00(b): Ultra Low ( BAT <= 2.50v)
... ... @@ -312,8 +312,10 @@
312 312  * BAT status=(0xcba4>>14)&0xFF=11(B)，very good
313 313  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
314 314  
327 +
315 315  === 2.5.3 Built-in Temperature ===
316 316  
330 +
317 317  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-2.png||_mstalt="431756" height="138" width="722"]]
318 318  
319 319  * Temperature:  0x0ABB/100=27.47℃
... ... @@ -322,18 +322,21 @@
322 322  
323 323  * Temperature:  (0xF5C6-65536)/100=-26.18℃
324 324  
339 +
325 325  === 2.5.4 Built-in Humidity ===
326 326  
342 +
327 327  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-4.png||_mstalt="432484" height="138" width="722"]]
328 328  
329 329  * Humidity:    0x025C/10=60.4%
330 330  
347 +
331 331  === 2.5.5 Ext value ===
332 332  
333 333  ==== 2.5.5.1 Ext~=0x0E, PIR Sensor ====
334 334  
335 335  
336 -[[image:ext=14.png||alt="image-20221224161634-2.png"]]
353 +[[image:ext=14.png||alt="image-20221224161634-2.png" height="166" width="1252"]]
337 337  
338 338  
339 339  ==== 2.5.5.2 Ext Value ====
... ... @@ -398,11 +398,195 @@
398 398  
399 399  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20221224161957-6.png||height="306" width="852"]]
400 400  
418 +== 2.7 Alarm Mode & Feature "Multi sampling, one uplink" ==
401 401  
402 402  
403 -== 2.7 LED Indicator ==
421 +(((
422 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
423 +)))
404 404  
425 +(((
426 +(% style="color:red" %)**Note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.**
405 405  
428 +
429 +=== 2.7.1 ALARM MODE ( Since v1.3.1 firmware) ===
430 +
431 +
432 +**Internal GXHT30 temperature alarm(Acquisition time: fixed at one minute)**
433 +
434 +(((
435 +(% class="box infomessage" %)
436 +(((
437 +**AT+WMOD=3**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
438 +
439 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
440 +
441 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
442 +
443 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
444 +
445 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
446 +
447 +**AT+LEDALARM=1** :       Enable LED visual Alarm.
448 +)))
449 +)))
450 +
451 +(% style="color:#4f81bd" %)**Downlink Command:**
452 +
453 +AT+WMOD=1:  A501  , AT+WMOD=0 :  A600
454 +
455 +AT+CITEMP=1 : A60001
456 +
457 +AT+ARTEMP=1,60  :  A70001003C
458 +
459 +AT+ARTEMP=-16,60 :  A7FFF0003C
460 +
461 +AT+LEDALARM=1  :  3601
462 +
463 +
464 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
465 +
466 +Total bytes: 8 bytes
467 +
468 +**Example: **AA0100010001003C
469 +
470 +WMOD=01
471 +
472 +CITEMP=0001
473 +
474 +TEMPlow=0001
475 +
476 +TEMPhigh=003C
477 +
478 +
479 +**DS18B20 and TMP117 Threshold Alarm**
480 +
481 +**~ AT+WMOD=1,60,-10,20**
482 +
483 +(% style="color:#4f81bd" %)**Downlink Command:**
484 +
485 +**Example: **A5013CFC180014
486 +
487 +MOD=01
488 +
489 +CITEMP=3C(S)
490 +
491 +TEMPlow=FC18
492 +
493 +TEMPhigh=0014
494 +
495 +
496 +**Fluctuation alarm for DS18B20 and TMP117(Acquisition time: minimum 1s)**
497 +
498 +**AT+WMOD=2,60,5** 
499 +
500 +(% style="color:#4f81bd" %)**Downlink Command:**
501 +
502 +**Example: **A5023C05
503 +
504 +MOD=02
505 +
506 +CITEMP=3C(S)
507 +
508 +temperature fluctuation=05
509 +
510 +
511 +**Sampling multiple times and uplink together**
512 +
513 +**AT+WMOD=3,1,60,20,-16,32,1**   
514 +
515 +Explain:
516 +
517 +* (% style="color:#037691" %)**parameter1: **(%%)Set Working Mode to **Mode 3**
518 +* (% style="color:#037691" %)**parameter2:**(%%) Set the temperature sampling mode to** 1**(1:DS18B20;2:TMP117;3:** **Internal GXHT30).
519 +* (% style="color:#037691" %)**parameter3: **(%%)Sampling Interval is **60**s.
520 +* (% style="color:#037691" %)**parameter4: **(%%)When there is **20** sampling dats, Device will send these data via one uplink. (max value is 60, means max 60 sampling in one uplink)
521 +* (% style="color:#037691" %)**parameter5 & parameter6: **(%%)Temperature alarm range is **-16** to **32**°C,
522 +* (% style="color:#037691" %)**parameter7:**(%%) 1 to enable temperature alarm, **0** to disable the temperature alarm. If alarm is enabled, a data will be sent immediately  if temperate exceeds the Alarm range.
523 +
524 +(% style="color:#4f81bd" %)**Downlink Command:**
525 +
526 +**Example: **A50301003C14FFF0002001
527 +
528 +MOD=03
529 +
530 +TEMP=DS18B20
531 +
532 +CITEMP=003C(S)
533 +
534 +Total number of acquisitions=14
535 +
536 +TEMPlow=FFF0
537 +
538 +TEMPhigh=0020
539 +
540 +ARTEMP=01
541 +
542 +
543 +**Uplink payload( Fport=3)**
544 +
545 +**Example: CBEA**01**0992**//0A41//**09C4**
546 +
547 +BatV=CBEA
548 +
549 +TEMP=DS18B20
550 +
551 +Temp1=0992  ~/~/ 24.50℃
552 +
553 +Temp2=0A41  ~/~/ 26.25℃
554 +
555 +Temp3=09C4  ~/~/ 25.00℃
556 +
557 +(% style="color:red" %)**Note: This uplink will automatically select the appropriate DR according to the data length**
558 +
559 +(% style="color:red" %)** In this mode, the temperature resolution of ds18b20 is 0.25℃ to save power consumption**
560 +)))
561 +
562 +
563 +=== 2.7.2 ALARM MODE ( Before v1.3.1 firmware) ===
564 +
565 +
566 +(% class="box infomessage" %)
567 +(((
568 +(((
569 +**AT+WMOD=1**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
570 +)))
571 +
572 +(((
573 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
574 +)))
575 +
576 +(((
577 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
578 +)))
579 +
580 +(((
581 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
582 +)))
583 +
584 +(((
585 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
586 +)))
587 +)))
588 +
589 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
590 +
591 +Total bytes: 8 bytes
592 +
593 +**Example:**AA0100010001003C
594 +
595 +WMOD=01
596 +
597 +CITEMP=0001
598 +
599 +TEMPlow=0001
600 +
601 +TEMPhigh=003C
602 +
603 +
604 +== 2.8 LED Indicator ==
605 +
606 +
406 406  The LHT65N-PIR has a triple color LED which for easy showing different stage .
407 407  
408 408  While user press ACT button, the LED will work as per LED status with ACT button.
... ... @@ -414,9 +414,10 @@
414 414  * (% style="color:red" %)**RED LED**(%%) when external sensor is not connected
415 415  * For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once
416 416  
417 -== 2.8 installation ==
418 418  
619 +== 2.9 installation ==
419 419  
621 +
420 420  ~1. Don't install LHT65N-PIR outdoor or place where will get wet.
421 421  
422 422  2. Towards the PIR probe to the place where need to monitor activity. Below is the detect beam.
... ... @@ -438,6 +438,7 @@
438 438  
439 439  * 5. Do not install more than one (2 or above) Wireless PIR in the same detection space (like at the same room).
440 440  
643 +
441 441  = 3. Sensors and Accessories =
442 442  
443 443  == 3.1 E2 Extension Cable ==
... ... @@ -469,6 +469,7 @@
469 469  
470 470  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
471 471  
675 +
472 472  == 4.2 General Commands ==
473 473  
474 474  
... ... @@ -493,11 +493,11 @@
493 493  
494 494  Feature: Change LoRaWAN End Node Transmit Interval.
495 495  
496 -(% style="color:#4f81bd" %)**AT Command: AT+TDC**
700 +(% style="color:#4f81bd" %)**AT Command: **
497 497  
498 498  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:501px" %)
499 499  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:166px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:180px" %)**Response**
500 -|(% style="width:155px" %)AT+TDC?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
704 +|(% style="width:155px" %)AT+TDC=?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
501 501  |(% style="width:155px" %)AT+TDC=60000|(% style="width:162px" %)Set Transmit Interval|(% style="width:177px" %)OK Set transmit interval to 60000ms = 60 seconds
502 502  
503 503  (% style="color:#4f81bd" %)**Downlink Payload: 0x01**
... ... @@ -510,6 +510,7 @@
510 510  
511 511  * **Example 2**: Downlink Payload: 0100003C  ~/~/ Set Transmit Interval (TDC) = 60 seconds
512 512  
717 +
513 513  === 4.3.2 Get Device Status ===
514 514  
515 515  
... ... @@ -525,7 +525,7 @@
525 525  
526 526  Feature: Set device password, max 9 digits
527 527  
528 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
733 +(% style="color:#4f81bd" %)**AT Command: **
529 529  
530 530  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:372px" %)
531 531  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:128px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**Response**
... ... @@ -546,11 +546,11 @@
546 546  
547 547  Feature: Set device to sleep mode
548 548  
549 -* **AT+Sleep=0**  : Normal working mode, device will sleep and use lower power when there is no LoRa message
754 +* (% style="color:#037691" %)**AT+Sleep=0**(%%)  : Normal working mode, device will sleep and use lower power when there is no LoRa message
550 550  
551 -* **AT+Sleep=1** :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
756 +* (% style="color:#037691" %)**AT+Sleep=1**(%%) :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
552 552  
553 -(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
758 +(% style="color:#4f81bd" %)**AT Command: **
554 554  
555 555  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:513px" %)
556 556  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:218px" %)**Response**
... ... @@ -564,23 +564,43 @@
564 564  
565 565  * There is no downlink command to set to Sleep mode.
566 566  
772 +
567 567  === 4.3.5 Set UOA (Uplink on Activity) ===
568 568  
569 569  
570 570  Feature: Enable / Disable Uplink on Activity
571 571  
572 -* **AT+UOA=0**  : Disable UoA
778 +(% style="color:#4f81bd" %)**AT Command: **
573 573  
574 -* **AT+UOA=1,2** :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
780 +* (% style="color:#037691" %)**AT+UOA=0**(%%)  : Disable UoA
575 575  
782 +* (% style="color:#037691" %)**AT+UOA=1,2**(%%) :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
783 +
576 576  (% style="color:red" %)**Notice: Calm Down time range is 1 ~~ 65535 minutes. If user set Calm Down time to low value, such as 1 minute, the sensor might send uplink very frequenctly and battery drain fast.**
577 577  
578 -(% style="color:#4f81bd" %)**AT Command: AT+UOA**
579 579  
787 +(% style="color:#4f81bd" %)**Downlink Command:**
580 580  
581 -(% style="color:#4f81bd" %)**Downlink Command:  **(% class="mark" %)**xxxxxxx**
789 +Format: Command Code (0xA1) followed by 1 byte or 3 bytes.
582 582  
791 +When followed by 3 bytes, the first byte is 01, and the second and third bytes are Calm Down Time.
583 583  
793 +* (% style="color:#037691" %)**A1 00    **(%%)** ==>  AT+UOA=0     **
794 +* (% style="color:#037691" %)**A1 01 00 02  **(%%)** ==>  AT+UOA=1,2**
795 +
796 +
797 +=== 4.3.6 Get data ===
798 +
799 +
800 +Feature: Get the current sensor data
801 +
802 +(% style="color:#4f81bd" %)**AT Command:**
803 +
804 + **AT+GETSENSORVALUE=0**      ~/~/ The serial port gets the reading of the current sensor
805 +
806 + **AT+GETSENSORVALUE=1**      ~/~/  The serial port gets the current sensor reading and uploads it.
807 +
808 +
584 584  = 5. Battery & Power Consumption =
585 585  
586 586  
... ... @@ -605,6 +605,7 @@
605 605  * (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
606 606  * Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
607 607  
833 +
608 608  = 7. FAQ =
609 609  
610 610  == 7.1 How to use AT Command? ==
... ... @@ -616,7 +616,6 @@
616 616  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
617 617  
618 618  
619 -
620 620  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@1655802313617-381.png||_mstalt="293917"]]
621 621  
622 622  
... ... @@ -677,10 +677,12 @@
677 677  
678 678  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
679 679  
905 +
680 680  (% style="color:blue" %)**Step1**(%%): Install TremoProgrammer  first.
681 681  
682 682  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615170542-5.png||_mstalt="430638"]]
683 683  
910 +
684 684  (% _mstmutation="1" style="color:blue" %)**Step2**(%%)：wiring method.(% style="display:none" %)
685 685  
686 686  First connect the four lines；(% style="display:none" %)
... ... @@ -693,7 +693,6 @@
693 693  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220621170938-2.png||_mstalt="431704"]]
694 694  
695 695  
696 -
697 697  (% style="color:blue" %)**Step3：**(%%)Select the device port to be connected, baud rate and bin file to be downloaded.
698 698  
699 699  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615171334-6.png||_mstalt="431028"]]
... ... @@ -709,8 +709,6 @@
709 709  
710 710  Finally, unplug the DuPont cable on port4, and then use the DuPont cable to short circuit port3 and port1 to reset the device.
711 711  
712 -
713 -
714 714  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
715 715  
716 716  
... ... @@ -730,6 +730,7 @@
730 730  * (% style="color:#4f81bd" %)** **(% _mstmutation="1" style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
731 731  * (% style="color:#4f81bd" %)** **(% _mstmutation="1" style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
732 732  
957 +
733 733  = 9. Packing Info =
734 734  
735 735  
... ... @@ -737,16 +737,13 @@
737 737  
738 738  * LHT65N-PIR Temperature/Humidity/PIR Sensor x 1
739 739  
740 -**Dimension and weight**:
741 741  
742 -* Device Size:  10 x 10 x 3.5 mm
743 -* Device Weight: 120.5g
744 -
745 745  = 10. Reference material =
746 746  
747 747  
748 748  * [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/sh/una19zsni308dme/AACOKp6J2RF5TMlKWT5zU3RTa?dl=0]]
749 749  
971 +
750 750  = 11. FCC Warning =
751 751  
752 752  
... ... @@ -755,3 +755,6 @@
755 755  (1) This device may not cause harmful interference；
756 756  
757 757  (2) this device must accept any interference received, including interference that may cause undesired operation.
980 +
981 +
982 +