Skip to Content
Last modified by Xiaoling on 2025/06/10 09:17
From version 44.5
edited by Xiaoling
on 2023/05/16 17:20
Change comment: There is no comment for this version
To version 47.1
edited by Bei Jinggeng
on 2023/10/31 17:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -43,8 +43,10 @@
43 43  * Built-in 2400mAh battery for up to 5 years of use.
44 44  * Built-in Temperature & Humidity sensor
45 45  * External PIR Sensor
46 -* Tri-color LED to indicate working status(% style="display:none" %)
46 +* Tri-color LED to indicate working status
47 47  
48 +(% style="display:none" %)
49 +
48 48  == 1.3 Specification ==
49 49  
50 50  
... ... @@ -62,13 +62,11 @@
62 62  * Long Term Drift: < 0.02 °C/yr
63 63  * Operating Range: 0 ~~ 96 %RH
64 64  
65 -(% class="mark" style="color:#037691" %)**External PIR Sensor:**
67 +(% style="color:#037691" %)**External PIR Sensor:**
66 66  
67 -* (% class="mark" %)Base on BH1750 Illumination Sensor
68 -* (% class="mark" %)Cable Length : 50cm
69 -* (% class="mark" %)Resolution: 1 lx
70 -* (% class="mark" %)Range: 0-65535 lx
71 -* (% class="mark" %)Operating Range: -40 °C ~~ 85 °C
69 +* Base on RDB223 Sensor
70 +* Cable Length : 1 meter
71 +* Stable detect distance : 0~~3 meter
72 72  
73 73  = 2. Connect LHT65N-PIR to IoT Server =
74 74  
... ... @@ -98,13 +98,13 @@
98 98  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
99 99  |=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
100 100  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Test uplink status|(% style="background-color:#f2f2f2; width:225px" %)(((
101 -If LHT65N is already Joined to rhe LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
101 +If LHT65N-PIR is already Joined to rhe LoRaWAN network, LHT65N-PIR will send an uplink packet, if LHT65N-PIR has external sensor connected,(% style="color:blue" %)**Blue led** (%%)will blink once. If LHT65N-PIR has not external sensor, (% style="color:red" %)**Red led**(%%) will blink once.
102 102  )))
103 103  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
104 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network.
104 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, LHT65N-PIR will enter working mode and start to JOIN LoRaWAN network.
105 105  (% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after join in network.
106 106  )))
107 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N is in Deep Sleep Mode.
107 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means LHT65N-PIR is in Deep Sleep Mode.
108 108  
109 109  == 2.3 Example to join LoRaWAN network ==
110 110  
... ... @@ -180,50 +180,53 @@
180 180  
181 181  [[image:image-20230508151932-1.png]]
182 182  
183 -**Sensor Model**: For LHT65N-PIR, this value is 0x1A
184 184  
185 -**Firmware Version**: 0x0100, Means: v1.0.0 version
184 +(% style="color:blue" %)**Sensor Model**(%%): For LHT65N-PIR, this value is 0x1A
186 186  
187 -**Frequency Band**:
186 +(% style="color:blue" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
188 188  
189 -*0x01: EU868
188 +(% style="color:blue" %)**Frequency Band**:
190 190  
191 -*0x02: US915
190 +0x01: EU868
192 192  
193 -*0x03: IN865
192 +0x02: US915
194 194  
195 -*0x04: AU915
194 +0x03: IN865
196 196  
197 -*0x05: KZ865
196 +0x04: AU915
198 198  
199 -*0x06: RU864
198 +0x05: KZ865
200 200  
201 -*0x07: AS923
200 +0x06: RU864
202 202  
203 -*0x08: AS923-1
202 +0x07: AS923
204 204  
205 -*0x09: AS923-2
204 +0x08: AS923-1
206 206  
207 -*0x0a: AS923-3
206 +0x09: AS923-2
208 208  
209 -*0x0b: CN470
208 +0x0a: AS923-3
210 210  
211 -*0x0c: EU433
210 +0x0b: CN470
212 212  
213 -*0x0d: KR920
212 +0x0c: EU433
214 214  
215 -*0x0e: MA869
214 +0x0d: KR920
216 216  
217 -**Sub-Band**:
216 +0x0e: MA869
218 218  
219 -AU915 and US915:value 0x00 ~~ 0x08
220 220  
219 +(% style="color:blue" %)**Sub-Band**:
220 +
221 +AU915 and US915: value 0x00 ~~ 0x08
222 +
221 221  CN470: value 0x0B ~~ 0x0C
222 222  
223 223  Other Bands: Always 0x00
224 224  
225 -**Battery Info**:
226 226  
228 +(% style="color:blue" %)**Battery Info**:
229 +
227 227  Check the battery voltage.
228 228  
229 229  Ex1: 0x0B45 = 2885mV
... ... @@ -239,21 +239,21 @@
239 239  After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
240 240  
241 241  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:390px" %)
242 -|=(% style="width: 60px;background-color:#D9E2F3" %)(((
245 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
243 243  **Size(bytes)**
244 -)))|=(% style="width: 30px;background-color:#D9E2F3" %)(((
247 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)(((
245 245  **2**
246 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
249 +)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)(((
247 247  **2**
248 -)))|=(% style="width: 100px;background-color:#D9E2F3" %)(((
251 +)))|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)(((
249 249  **2**
250 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
253 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
251 251  **1**
252 -)))|=(% style="width: 50px;background-color:#D9E2F3" %)(((
255 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
253 253  **4**
254 254  )))
255 255  |(% style="width:97px" %)(((
256 -**Value**
259 +Value
257 257  )))|(% style="width:39px" %)(((
258 258  [[BAT>>||anchor="H2.5.2BAT-BatteryInfo"]]
259 259  )))|(% style="width:100px" %)(((
... ... @@ -296,7 +296,7 @@
296 296  **Bit(bit)**
297 297  )))|=(% style="width: 253px;background-color:#D9E2F3;color:#0070C0" %)[15:14]|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)[13:0]
298 298  |(% style="width:66px" %)(((
299 -**Value**
302 +Value
300 300  )))|(% style="width:250px" %)(((
301 301  BAT Status
302 302  00(b): Ultra Low ( BAT <= 2.50v)
... ... @@ -315,6 +315,7 @@
315 315  
316 316  === 2.5.3 Built-in Temperature ===
317 317  
321 +
318 318  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-2.png||_mstalt="431756" height="138" width="722"]]
319 319  
320 320  * Temperature:  0x0ABB/100=27.47℃
... ... @@ -325,6 +325,7 @@
325 325  
326 326  === 2.5.4 Built-in Humidity ===
327 327  
332 +
328 328  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220522235639-4.png||_mstalt="432484" height="138" width="722"]]
329 329  
330 330  * Humidity:    0x025C/10=60.4%
... ... @@ -333,6 +333,7 @@
333 333  
334 334  ==== 2.5.5.1 Ext~=0x0E, PIR Sensor ====
335 335  
341 +
336 336  [[image:ext=14.png||alt="image-20221224161634-2.png"]]
337 337  
338 338  
... ... @@ -344,11 +344,11 @@
344 344  Bit0 of byte 8th shows if this uplink is generate by PIR activity.
345 345  
346 346  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:393px" %)
347 -|=(% style="width: 106px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)(((
353 +|=(% style="width: 107px; background-color:#D9E2F3;color:#0070C0" %)(((
348 348  **The 8^^th^^ byte**
349 -)))|=(% style="width: 71px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)(((
355 +)))|=(% style="width: 73px; background-color:#D9E2F3;color:#0070C0" %)(((
350 350  **Bit 1~~7**
351 -)))|=(% style="width: 211px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)(((
357 +)))|=(% style="width: 213px; background-color:#D9E2F3;color:#0070C0" %)(((
352 352  **Bit 0**
353 353  )))
354 354  |(% style="width:106px" %)(((
... ... @@ -369,6 +369,7 @@
369 369  0x00 E5 09 : Total detect 58633 activity since end node start.
370 370  
371 371  
378 +
372 372  == 2.6 Show data on Datacake ==
373 373  
374 374  
... ... @@ -398,11 +398,195 @@
398 398  
399 399  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20221224161957-6.png||height="306" width="852"]]
400 400  
408 +== 2.7 Alarm Mode & Feature "Multi sampling, one uplink" ==
401 401  
402 402  
403 -== 2.7 LED Indicator ==
411 +(((
412 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
413 +)))
404 404  
415 +(((
416 +(% style="color:red" %)**Note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.**
405 405  
418 +
419 +=== 2.7.1 ALARM MODE ( Since v1.3.1 firmware) ===
420 +
421 +
422 +**Internal GXHT30 temperature alarm(Acquisition time: fixed at one minute)**
423 +
424 +(((
425 +(% class="box infomessage" %)
426 +(((
427 +**AT+WMOD=3**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
428 +
429 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
430 +
431 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
432 +
433 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
434 +
435 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
436 +
437 +**AT+LEDALARM=1** :       Enable LED visual Alarm.
438 +)))
439 +)))
440 +
441 +(% style="color:#4f81bd" %)**Downlink Command:**
442 +
443 +AT+WMOD=1:  A501  , AT+WMOD=0 :  A600
444 +
445 +AT+CITEMP=1 : A60001
446 +
447 +AT+ARTEMP=1,60  :  A70001003C
448 +
449 +AT+ARTEMP=-16,60 :  A7FFF0003C
450 +
451 +AT+LEDALARM=1  :  3601
452 +
453 +
454 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
455 +
456 +Total bytes: 8 bytes
457 +
458 +**Example: **AA0100010001003C
459 +
460 +WMOD=01
461 +
462 +CITEMP=0001
463 +
464 +TEMPlow=0001
465 +
466 +TEMPhigh=003C
467 +
468 +
469 +**DS18B20 and TMP117 Threshold Alarm**
470 +
471 +**~ AT+WMOD=1,60,-10,20**
472 +
473 +(% style="color:#4f81bd" %)**Downlink Command:**
474 +
475 +**Example: **A5013CFC180014
476 +
477 +MOD=01
478 +
479 +CITEMP=3C(S)
480 +
481 +TEMPlow=FC18
482 +
483 +TEMPhigh=0014
484 +
485 +
486 +**Fluctuation alarm for DS18B20 and TMP117(Acquisition time: minimum 1s)**
487 +
488 +**AT+WMOD=2,60,5** 
489 +
490 +(% style="color:#4f81bd" %)**Downlink Command:**
491 +
492 +**Example: **A5023C05
493 +
494 +MOD=02
495 +
496 +CITEMP=3C(S)
497 +
498 +temperature fluctuation=05
499 +
500 +
501 +**Sampling multiple times and uplink together**
502 +
503 +**AT+WMOD=3,1,60,20,-16,32,1**   
504 +
505 +Explain:
506 +
507 +* (% style="color:#037691" %)**parameter1: **(%%)Set Working Mode to **Mode 3**
508 +* (% style="color:#037691" %)**parameter2:**(%%) Set the temperature sampling mode to** 1**(1:DS18B20;2:TMP117;3:** **Internal GXHT30).
509 +* (% style="color:#037691" %)**parameter3: **(%%)Sampling Interval is **60**s.
510 +* (% style="color:#037691" %)**parameter4: **(%%)When there is **20** sampling dats, Device will send these data via one uplink. (max value is 60, means max 60 sampling in one uplink)
511 +* (% style="color:#037691" %)**parameter5 & parameter6: **(%%)Temperature alarm range is **-16** to **32**°C,
512 +* (% style="color:#037691" %)**parameter7:**(%%) 1 to enable temperature alarm, **0** to disable the temperature alarm. If alarm is enabled, a data will be sent immediately  if temperate exceeds the Alarm range.
513 +
514 +(% style="color:#4f81bd" %)**Downlink Command:**
515 +
516 +**Example: **A50301003C14FFF0002001
517 +
518 +MOD=03
519 +
520 +TEMP=DS18B20
521 +
522 +CITEMP=003C(S)
523 +
524 +Total number of acquisitions=14
525 +
526 +TEMPlow=FFF0
527 +
528 +TEMPhigh=0020
529 +
530 +ARTEMP=01
531 +
532 +
533 +**Uplink payload( Fport=3)**
534 +
535 +**Example: CBEA**01**0992**//0A41//**09C4**
536 +
537 +BatV=CBEA
538 +
539 +TEMP=DS18B20
540 +
541 +Temp1=0992  ~/~/ 24.50℃
542 +
543 +Temp2=0A41  ~/~/ 26.25℃
544 +
545 +Temp3=09C4  ~/~/ 25.00℃
546 +
547 +(% style="color:red" %)**Note: This uplink will automatically select the appropriate DR according to the data length**
548 +
549 +(% style="color:red" %)** In this mode, the temperature resolution of ds18b20 is 0.25℃ to save power consumption**
550 +)))
551 +
552 +
553 +=== 2.7.2 ALARM MODE ( Before v1.3.1 firmware) ===
554 +
555 +
556 +(% class="box infomessage" %)
557 +(((
558 +(((
559 +**AT+WMOD=1**:  Enable/disable alarm mode. (0: Disabled, 1: Enabled Temperature Alarm for onboard temperature sensor)
560 +)))
561 +
562 +(((
563 +**AT+CITEMP=1**:  The interval between checking the alarm temperature. (In minutes)
564 +)))
565 +
566 +(((
567 +**AT+ARTEMP**:  Gets or sets the alarm range of the internal temperature sensor
568 +)))
569 +
570 +(((
571 +(% _mstmutation="1" %)**AT+ARTEMP=? **(%%):  Gets the alarm range of the internal temperature sensor(% style="display:none" %)
572 +)))
573 +
574 +(((
575 +**AT+ARTEMP=45,105**:  Set the internal temperature sensor alarm range from 45 to 105.
576 +)))
577 +)))
578 +
579 +(% style="color:#4f81bd" %)**Downlink Command: AAXXXXXXXXXXXXXX**
580 +
581 +Total bytes: 8 bytes
582 +
583 +**Example:**AA0100010001003C
584 +
585 +WMOD=01
586 +
587 +CITEMP=0001
588 +
589 +TEMPlow=0001
590 +
591 +TEMPhigh=003C
592 +
593 +
594 +== 2.8 LED Indicator ==
595 +
596 +
406 406  The LHT65N-PIR has a triple color LED which for easy showing different stage .
407 407  
408 408  While user press ACT button, the LED will work as per LED status with ACT button.
... ... @@ -409,12 +409,12 @@
409 409  
410 410  In a normal working state:
411 411  
412 -* For each uplink, the **(% style="color:blue" %)BLUE LED**(%%) or (% style="color:red" %)**RED LED**(%%) will blink once.
603 +* For each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:red" %)**RED LED**(%%) will blink once.
413 413  (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected.
414 414  * (% style="color:red" %)**RED LED**(%%) when external sensor is not connected
415 415  * For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once
416 416  
417 -== 2.8 installation ==
608 +== 2.9 installation ==
418 418  
419 419  
420 420  ~1. Don't install LHT65N-PIR outdoor or place where will get wet.
... ... @@ -425,6 +425,7 @@
425 425  
426 426  [[image:image-20230411135341-1.png||height="450" width="456"]]
427 427  
619 +
428 428  (% style="color:red" %)**Notice: PIR can only detect motion activity, not to use to detect static people case.**
429 429  
430 430  * 1. PIR Motion Detector should not be installed near the Air conditioner places where with cold wind or hot wind flow, because PIR motion detector is sensitive with the temperature changes of the environment. Environment changes quickly will cause a false alarm.
... ... @@ -492,11 +492,11 @@
492 492  
493 493  Feature: Change LoRaWAN End Node Transmit Interval.
494 494  
495 -(% style="color:#4f81bd" %)**AT Command: AT+TDC**
687 +(% style="color:#4f81bd" %)**AT Command: **
496 496  
497 497  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:501px" %)
498 498  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:166px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:180px" %)**Response**
499 -|(% style="width:155px" %)AT+TDC?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
691 +|(% style="width:155px" %)AT+TDC=?|(% style="width:162px" %)Show current transmit Interval|(% style="width:177px" %)30000 OK the interval is 30000ms = 30s
500 500  |(% style="width:155px" %)AT+TDC=60000|(% style="width:162px" %)Set Transmit Interval|(% style="width:177px" %)OK Set transmit interval to 60000ms = 60 seconds
501 501  
502 502  (% style="color:#4f81bd" %)**Downlink Payload: 0x01**
... ... @@ -524,7 +524,7 @@
524 524  
525 525  Feature: Set device password, max 9 digits
526 526  
527 -(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
719 +(% style="color:#4f81bd" %)**AT Command: **
528 528  
529 529  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:372px" %)
530 530  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:128px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**Response**
... ... @@ -545,11 +545,11 @@
545 545  
546 546  Feature: Set device to sleep mode
547 547  
548 -* **AT+Sleep=0**  : Normal working mode, device will sleep and use lower power when there is no LoRa message
740 +* (% style="color:#037691" %)**AT+Sleep=0**(%%)  : Normal working mode, device will sleep and use lower power when there is no LoRa message
549 549  
550 -* **AT+Sleep=1** :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
742 +* (% style="color:#037691" %)**AT+Sleep=1**(%%) :  Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
551 551  
552 -(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
744 +(% style="color:#4f81bd" %)**AT Command: **
553 553  
554 554  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:513px" %)
555 555  |(% style="background-color:#d9e2f3; color:#0070c0; width:155px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0; width:218px" %)**Response**
... ... @@ -568,18 +568,24 @@
568 568  
569 569  Feature: Enable / Disable Uplink on Activity
570 570  
571 -* **AT+UOA=0**  : Disable UoA
763 +(% style="color:#4f81bd" %)**AT Command: **
572 572  
573 -* **AT+UOA=1,2** :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
765 +* (% style="color:#037691" %)**AT+UOA=0**(%%)  : Disable UoA
574 574  
767 +* (% style="color:#037691" %)**AT+UOA=1,2**(%%) :  Enable UoA , Calm Down Time: 2 minutes. If device already send a uplink on activity, it will not send another uplink on activiy in 2 minutes, even detect activity.
768 +
575 575  (% style="color:red" %)**Notice: Calm Down time range is 1 ~~ 65535 minutes. If user set Calm Down time to low value, such as 1 minute, the sensor might send uplink very frequenctly and battery drain fast.**
576 576  
577 -(% style="color:#4f81bd" %)**AT Command: AT+UOA**
578 578  
772 +(% style="color:#4f81bd" %)**Downlink Command:**
579 579  
580 -(% style="color:#4f81bd" %)**Downlink Command:  **(% class="mark" %)**xxxxxxx**
774 +Format: Command Code (0xA1) followed by 1 byte or 3 bytes.
581 581  
776 +When followed by 3 bytes, the first byte is 01, and the second and third bytes are Calm Down Time.
582 582  
778 +* (% style="color:#037691" %)**A1 00    **(%%)** ==>  AT+UOA=0     **
779 +* (% style="color:#037691" %)**A1 01 00 02  **(%%)** ==>  AT+UOA=1,2**
780 +
583 583  = 5. Battery & Power Consumption =
584 584  
585 585  
... ... @@ -615,7 +615,6 @@
615 615  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
616 616  
617 617  
618 -
619 619  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@1655802313617-381.png||_mstalt="293917"]]
620 620  
621 621  
... ... @@ -676,10 +676,12 @@
676 676  
677 677  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615153355-1.png||_mstalt="430222"]]
678 678  
876 +
679 679  (% style="color:blue" %)**Step1**(%%): Install TremoProgrammer  first.
680 680  
681 681  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615170542-5.png||_mstalt="430638"]]
682 682  
881 +
683 683  (% _mstmutation="1" style="color:blue" %)**Step2**(%%)：wiring method.(% style="display:none" %)
684 684  
685 685  First connect the four lines；(% style="display:none" %)
... ... @@ -692,7 +692,6 @@
692 692  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220621170938-2.png||_mstalt="431704"]]
693 693  
694 694  
695 -
696 696  (% style="color:blue" %)**Step3：**(%%)Select the device port to be connected, baud rate and bin file to be downloaded.
697 697  
698 698  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615171334-6.png||_mstalt="431028"]]
... ... @@ -708,8 +708,6 @@
708 708  
709 709  Finally, unplug the DuPont cable on port4, and then use the DuPont cable to short circuit port3 and port1 to reset the device.
710 710  
711 -
712 -
713 713  [[image:Main.User Manual for LoRaWAN End Nodes.LHT65N-E5 LoRaWAN Temperature_Humidity & Illuminance Sensor User Manual.WebHome@image-20220615154519-3.png||_mstalt="431925" height="672" width="807"]]
714 714  
715 715  
... ... @@ -736,11 +736,6 @@
736 736  
737 737  * LHT65N-PIR Temperature/Humidity/PIR Sensor x 1
738 738  
739 -**Dimension and weight**:
740 -
741 -* Device Size:  10 x 10 x 3.5 mm
742 -* Device Weight: 120.5g
743 -
744 744  = 10. Reference material =
745 745  
746 746