Version 110.1 by Bei Jinggeng on 2022/05/25 17:42
Show last authors
1 (% _mstvisible="2" style="text-align:center" %)
2 [[image:image-20220523115324-1.jpeg||_mstalt="469677" _mstvisible="4" height="317" width="317"]]
3
4
5 (% _mstvisible="1" %)
6 (% _msthash="315237" _msttexthash="1697033" _mstvisible="3" %)**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
7
8
9
10
11 (% _mstvisible="1" %)
12 (% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
13
14 {{toc/}}
15
16
17
18
19 (% _mstvisible="1" %)
20 = (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)1. Introduction(%%) =
21
22 (% _mstvisible="1" %)
23 == (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 What is LHT65N Temperature & Humidity Sensor(%%) ==
24
25 (% _mstvisible="1" %)
26 (((
27 (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
29 )))
30
31 (% _mstvisible="1" %)
32 (((
33 (% _msthash="506052" _msttexthash="66005810" _mstvisible="2" %)
34 The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
35 )))
36
37 (% _mstvisible="1" %)
38 (((
39 (% _msthash="506053" _msttexthash="4298047" _mstvisible="2" %)
40 LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
41 )))
42
43 (% _mstvisible="1" %)
44 (((
45 (% _msthash="506054" _msttexthash="6016374" _mstvisible="2" %)
46 LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
47 )))
48
49 (% _mstvisible="1" %)
50 (((
51 (% _msthash="506055" _msttexthash="17023136" _mstvisible="2" %)
52 LHT65N supports (% _mstvisible="4" style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
53 )))
54
55 (% _mstvisible="1" %)
56 (((
57 (% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
58 *The actual battery life depends on how often to send data, please see the battery analyzer chapter.
59 )))
60
61 (% _mstvisible="1" %)
62 == (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 Features(%%) ==
63
64 (% _mstvisible="1" %)
65 * Wall mountable
66 * LoRaWAN v1.0.3 Class A protocol
67 * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
68 * AT Commands to change parameters
69 * Remote configure parameters via LoRaWAN Downlink
70 * Firmware upgradeable via program port
71 * Built-in 2400mAh battery for up to 10 years of use.
72 * Built-in Temperature & Humidity sensor
73 * Optional External Sensors
74 * Tri-color LED to indicate working status
75 * Datalog feature
76
77 (% _mstvisible="1" %)
78 == (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
79
80 (% _mstvisible="1" %)
81 (((
82 (% _mstvisible="2" %)
83 (% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**Built-in Temperature Sensor:**
84 )))
85
86 (% _mstvisible="1" %)
87 * (% _mstvisible="3" %)
88 (((
89 (% _msthash="902993" _msttexthash="294424" _mstvisible="4" %)
90 Resolution: 0.01 °C
91 )))
92 * (% _mstvisible="3" %)
93 (((
94 (% _msthash="902994" _msttexthash="690664" _mstvisible="4" %)
95 Accuracy Tolerance : Typ ±0.3 °C
96 )))
97 * (% _mstvisible="3" %)
98 (((
99 (% _msthash="902995" _msttexthash="504647" _mstvisible="4" %)
100 Long Term Drift: < 0.02 °C/yr
101 )))
102 * (% _mstvisible="3" %)
103 (((
104 (% _msthash="902996" _msttexthash="478257" _mstvisible="4" %)
105 Operating Range: -40 ~~ 85 °C
106 )))
107
108 (% _mstvisible="1" %)
109 (((
110 (% _mstvisible="2" %)
111 (% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**Built-in Humidity Sensor:**
112 )))
113
114 (% _mstvisible="1" %)
115 * (% _mstvisible="3" %)
116 (((
117 (% _msthash="902997" _msttexthash="282438" _mstvisible="4" %)
118 Resolution: 0.04 %RH
119 )))
120 * (% _mstvisible="3" %)
121 (((
122 (% _msthash="902998" _msttexthash="628771" _mstvisible="4" %)
123 Accuracy Tolerance : Typ ±3 %RH
124 )))
125 * (% _mstvisible="3" %)
126 (((
127 (% _msthash="902999" _msttexthash="504647" _mstvisible="4" %)
128 Long Term Drift: < 0.02 °C/yr
129 )))
130 * (% _mstvisible="3" %)
131 (((
132 (% _msthash="903000" _msttexthash="421291" _mstvisible="4" %)
133 Operating Range: 0 ~~ 96 %RH
134 )))
135
136 (% _mstvisible="1" %)
137 (((
138 (% _mstvisible="2" %)
139 (% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**External Temperature Sensor:**
140 )))
141
142 (% _mstvisible="1" %)
143 * (% _mstvisible="3" %)
144 (((
145 (% _msthash="903001" _msttexthash="332254" _mstvisible="4" %)
146 Resolution: 0.0625 °C
147 )))
148 * (% _mstvisible="3" %)
149 (((
150 (% _msthash="903002" _msttexthash="782600" _mstvisible="4" %)
151 ±0.5°C accuracy from -10°C to +85°C
152 )))
153 * (% _mstvisible="3" %)
154 (((
155 (% _msthash="903003" _msttexthash="729482" _mstvisible="4" %)
156 ±2°C accuracy from -55°C to +125°C
157 )))
158 * (% _mstvisible="3" %)
159 (((
160 (% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
161 Operating Range: -55 °C ~~ 125 °C
162 )))
163
164 (% _mstvisible="1" %)
165 = (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. Connect LHT65N to IoT Server(%%) =
166
167 (% _mstvisible="1" %)
168 == (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 How does LHT65N work?(%%) ==
169
170 (% _mstvisible="1" %)
171 (((
172 (% _msthash="506060" _msttexthash="28254538" _mstvisible="2" %)
173 LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
174 )))
175
176 (% _mstvisible="1" %)
177 (((
178 (% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
179 If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
180 )))
181
182 (% _mstvisible="1" %)
183 == (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 How to Activate LHT65N?(%%) ==
184
185 (% _msthash="315239" _msttexthash="748241" _mstvisible="1" %)
186 The LHT65N has two working modes:
187
188 (% _mstvisible="1" %)
189 * **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
190 * **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
191
192 (% _mstvisible="1" %)
193 (((
194 (% _msthash="506062" _msttexthash="6036823" _mstvisible="2" %)
195 The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
196 )))
197
198 (% _mstvisible="1" %)
199 [[image:image-20220515123819-1.png||_mstalt="430742" _mstvisible="3" height="379" width="317"]]
200
201 (% _mstvisible="1" %)
202 [[image:image-20220525110604-2.png||_mstalt="427531" _mstvisible="3"]]
203
204 (% _mstvisible="1" %)
205 == (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 Example to join LoRaWAN network(%%) ==
206
207 (% _msthash="315240" _msttexthash="9205482" _mstvisible="1" class="wikigeneratedid" %)
208 This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
209
210 (% _mstvisible="1" class="wikigeneratedid" %)
211 [[image:image-20220522232442-1.png||_mstalt="427830" _mstvisible="3" height="387" width="648"]]
212
213 (% _msthash="315241" _msttexthash="10802155" _mstvisible="1" %)
214 Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
215
216
217 (% _mstvisible="1" %)
218 === (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 Step 1: Create Device n TTN(%%) ===
219
220 (% _msthash="315242" _msttexthash="1601782" _mstvisible="1" %)
221 Create a device in TTN V3 with the OTAA keys from LHT65N.
222
223 (% _msthash="315243" _msttexthash="3694444" _mstvisible="1" %)
224 Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
225
226 (% _mstvisible="1" %)
227 [[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
228
229 (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
230 User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
231
232 (% _msthash="315245" _msttexthash="642889" _mstvisible="1" %)
233 Add APP EUI in the application.
234
235 (% _mstvisible="1" %)
236 [[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]
237
238 (% _mstvisible="1" %)
239 [[image:image-20220522232932-4.png||_mstalt="430157" _mstvisible="3"]]
240
241 (% _mstvisible="1" %)
242 [[image:image-20220522232954-5.png||_mstalt="431847" _mstvisible="3"]]
243
244 (% _msthash="315246" _msttexthash="878800" _mstvisible="1" %)
245 Note: LHT65N use same payload as LHT65.
246
247 (% _mstvisible="1" %)
248 [[image:image-20220522233026-6.png||_mstalt="429403" _mstvisible="3"]]
249
250
251 (% _msthash="315247" _msttexthash="595543" _mstvisible="1" %)
252 Input APP EUI,  APP KEY and DEV EUI:
253
254 (% _mstvisible="1" %)
255 [[image:image-20220522233118-7.png||_mstalt="430430" _mstvisible="3"]]
256
257
258 (% _mstvisible="1" %)
259 === (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds.(%%) ===
260
261 (% _msthash="315248" _msttexthash="14452321" _mstvisible="1" %)
262 Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
263
264 (% _mstvisible="1" %)
265 [[image:image-20220522233300-8.png||_mstalt="428389" _mstvisible="3" height="219" width="722"]]
266
267
268 (% _mstvisible="1" %)
269 == (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 Uplink Payload(%%) ==
270
271 (% _msthash="315249" _msttexthash="7722962" _mstvisible="1" %)
272 The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% _mstvisible="3" style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
273
274 (% _msthash="315250" _msttexthash="1322711" _mstvisible="1" %)
275 After each uplink, the (% _mstvisible="3" style="color:blue" %)**BLUE LED**(%%) will blink once.
276
277 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:426px" %)
278 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
279 (((
280 (% _mstvisible="6" %)
281 (% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
282 )))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
283 (((
284 (% _mstvisible="6" %)
285 (% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**
286 )))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
287 (((
288 (% _mstvisible="6" %)
289 (% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**
290 )))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
291 (((
292 (% _mstvisible="6" %)
293 (% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**
294 )))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
295 (((
296 (% _mstvisible="6" %)
297 (% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**
298 )))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
299 (((
300 (% _mstvisible="6" %)
301 (% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**
302 )))
303 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
304 (((
305 (% _mstvisible="6" %)
306 (% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**
307 )))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
308 (((
309 (% _mstvisible="6" %)
310 [[BAT>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
311 )))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
312 (((
313 (% _mstvisible="6" %)
314 (((
315 (% _mstvisible="7" %)
316 [[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
317 )))
318 )))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
319 (((
320 (% _mstvisible="6" %)
321 (((
322 (% _mstvisible="7" %)
323 [[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
324 )))
325
326 (% _mstvisible="6" %)
327 (((
328 (% _mstvisible="7" %)
329 [[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
330 )))
331 )))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
332 (((
333 (% _mstvisible="6" %)
334 [[Ext>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
335 )))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
336 (((
337 (% _mstvisible="6" %)
338 [[Ext value>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
339 )))
340
341 (% _mstvisible="1" %)
342 * The First 6 bytes: has fix meanings for every LHT65N.
343 * The 7th byte (EXT #): defines the external sensor model.
344 * The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
345
346 (% _mstvisible="1" %)
347 === (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
348
349 (% _msthash="315251" _msttexthash="9786491" _mstvisible="1" %)
350 When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
351
352 (% _msthash="315252" _msttexthash="3928483" _mstvisible="1" %)
353 Below is the position to put the decoder and LHT65N decoder can be download from here:
354
355 (% _mstvisible="1" %)
356 [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0||_msthash="315253" _msttexthash="3509064" _mstvisible="2"]]
357
358 (% _mstvisible="1" %)
359 [[image:image-20220522234118-10.png||_mstalt="451464" _mstvisible="3" height="353" width="729"]]
360
361 (% _mstvisible="1" %)
362 === (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-Battery Info(%%) ===
363
364 (% _msthash="315254" _msttexthash="3122912" _mstvisible="1" %)
365 These two bytes of BAT include the battery state and the actually voltage
366
367 (% _mstvisible="1" %)
368 [[image:image-20220523152839-18.png||_mstalt="457613" _mstvisible="3"]]
369
370 (% _mstvisible="1" %)
371 [[image:image-20220522235639-1.png||_mstalt="431392" _mstvisible="3" height="139" width="727"]]
372
373 (% _msthash="315255" _msttexthash="871611" _mstvisible="1" %)
374 Check the battery voltage for LHT65N.
375
376 (% _mstvisible="1" %)
377 * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
378 * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
379
380 (% _mstvisible="1" %)
381 === (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
382
383 (% _mstvisible="1" %)
384 [[image:image-20220522235639-2.png||_mstalt="431756" _mstvisible="3" height="138" width="722"]]
385
386 (% _mstvisible="1" %)
387 * Temperature:  0x0ABB/100=27.47℃
388
389 (% _mstvisible="1" %)
390 [[image:image-20220522235639-3.png||_mstalt="432120" _mstvisible="3"]]
391
392 (% _mstvisible="1" %)
393 * Temperature:  (0xF5C6-65536)/100=-26.18℃
394
395 (% _mstvisible="1" %)
396 === (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
397
398 (% _mstvisible="1" %)
399 [[image:image-20220522235639-4.png||_mstalt="432484" _mstvisible="3" height="138" width="722"]]
400
401 (% _mstvisible="1" %)
402 * Humidity:    0x025C/10=60.4%
403
404 (% _mstvisible="1" %)
405 === (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
406
407 (% _msthash="315256" _msttexthash="552240" _mstvisible="1" %)
408 Bytes for External Sensor:
409
410 (% _mstvisible="1" %)
411 [[image:image-20220523152822-17.png||_mstalt="454545" _mstvisible="3"]]
412
413 (% _mstvisible="1" %)
414 === (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 Ext value(%%) ===
415
416 (% _mstvisible="1" %)
417 ==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1, E3 Temperature Sensor(%%) ====
418
419 (% _mstvisible="1" %)
420 [[image:image-20220522235639-5.png||_mstalt="432848" _mstvisible="3"]]
421
422 (% _mstvisible="1" %)
423 * DS18B20 temp=0x0ADD/100=27.81℃
424
425 (% _msthash="315257" _msttexthash="1038479" _mstvisible="1" %)
426 The last 2 bytes of data are meaningless
427
428 (% _mstvisible="1" %)
429 [[image:image-20220522235639-6.png||_mstalt="433212" _mstvisible="3"]]
430
431 (% _mstvisible="1" %)
432 * External temperature= (0xF54F-65536)/100=-27.37℃
433
434 (% _mstvisible="1" %)
435 (((
436 (% _msthash="506063" _msttexthash="1038479" _mstvisible="2" %)
437 The last 2 bytes of data are meaningless
438 )))
439
440 (% _mstvisible="1" %)
441 (((
442 (% _msthash="506064" _msttexthash="21185632" _mstvisible="2" %)
443 If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
444 )))
445
446
447 (% _mstvisible="1" %)
448 ==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
449
450 (% _msthash="315258" _msttexthash="41539368" _mstvisible="1" %)
451 Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
452
453 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:510px" %)
454 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
455 (((
456 (% _mstvisible="6" %)
457 (% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
458 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
459 (((
460 (% _mstvisible="6" %)
461 (% _msthash="1817489" _msttexthash="4550" _mstvisible="8" %)**2**
462 )))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
463 (((
464 (% _mstvisible="6" %)
465 (% _msthash="1817490" _msttexthash="4550" _mstvisible="8" %)**2**
466 )))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
467 (((
468 (% _mstvisible="6" %)
469 (% _msthash="1817491" _msttexthash="4550" _mstvisible="8" %)**2**
470 )))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
471 (((
472 (% _mstvisible="6" %)
473 (% _msthash="1817492" _msttexthash="4459" _mstvisible="8" %)**1**
474 )))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
475 (((
476 (% _mstvisible="6" %)
477 (% _msthash="1817493" _msttexthash="4732" _mstvisible="8" %)**4**
478 )))
479 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
480 (((
481 (% _mstvisible="6" %)
482 (% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**Value**
483 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
484 (((
485 (% _mstvisible="6" %)
486 [[External temperature>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
487 )))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
488 (((
489 (% _mstvisible="6" %)
490 (((
491 (% _mstvisible="7" %)
492 [[Built-In>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
493 )))
494
495 (% _mstvisible="6" %)
496 (((
497 (% _mstvisible="7" %)
498 [[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
499 )))
500 )))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
501 (((
502 (% _mstvisible="6" %)
503 (((
504 (% _msthash="2224747" _msttexthash="136331" _mstvisible="7" %)
505 BAT Status &
506 )))
507
508 (% _mstvisible="6" %)
509 (((
510 (% _mstvisible="7" %)
511 [[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
512 )))
513 )))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
514 (((
515 (% _msthash="1817496" _msttexthash="147225" _mstvisible="6" %)
516 Status & Ext
517 )))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
518 (((
519 (% _mstvisible="6" %)
520 (((
521 (% _mstvisible="7" %)
522 [[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
523 )))
524 )))
525
526 (% _mstvisible="1" %)
527 * (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**Battery status & **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**
528
529 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:469px" %)
530 (% _mstvisible="3" %)|(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width:65px" %)Bit(bit)|(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width:267px" %)[15:14]|(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width:134px" %)[11:0]
531 (% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)Value|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
532 (((
533 (% _msthash="1817497" _msttexthash="128427" _mstvisible="6" %)
534 BAT Status
535
536 (% _msthash="1817498" _msttexthash="472784" _mstvisible="6" %)
537 00(b): Ultra Low ( BAT <= 2.50v)
538
539 (% _msthash="1817499" _msttexthash="483678" _mstvisible="6" %)
540 01(b): Low  (2.50v <=BAT <= 2.55v)
541
542 (% _msthash="1817500" _msttexthash="440791" _mstvisible="6" %)
543 10(b): OK   (2.55v <= BAT <=2.65v)
544
545 (% _msthash="1817501" _msttexthash="334191" _mstvisible="6" %)
546 11(b): Good   (BAT >= 2.65v)
547 )))|(% _mstvisible="4" style="width:134px" %)(% _mstvisible="5" %)
548 (((
549 (% _mstvisible="6" %)
550 [[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
551
552 (% _mstvisible="6" %)
553
554 )))
555
556 (% _mstvisible="1" %)
557 * (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**Status & Ext Byte**
558
559 (% _mstvisible="1" %)
560 [[image:image-20220523152434-16.png||_mstalt="453921" _mstvisible="3"]]
561
562 (% _mstvisible="1" %)
563 * Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
564 * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
565 * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
566
567 (% _mstvisible="1" %)
568 == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
569
570 (% _msthash="315259" _msttexthash="20933341" _mstvisible="1" %)
571 Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
572
573 (% _mstvisible="1" %)
574 (((
575 (% _msthash="506065" _msttexthash="4753983" _mstvisible="2" %)
576 (% _mstvisible="3" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
577 )))
578
579 (% _mstvisible="1" %)
580 (((
581 (% _msthash="506066" _msttexthash="14696682" _mstvisible="2" %)
582 (% _mstvisible="3" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
583 )))
584
585 (% _mstvisible="1" %)
586 (((
587 (% _msthash="506067" _msttexthash="180297" _mstvisible="2" %)
588 Add Datacake:
589 )))
590
591 (% _mstvisible="1" %)
592 [[image:image-20220523000825-7.png||_mstalt="429884" _mstvisible="3" height="262" width="583"]]
593
594
595 (% _msthash="315260" _msttexthash="750178" _mstvisible="1" %)
596 Select default key as Access Key:
597
598 (% _mstvisible="1" %)
599 [[image:image-20220523000825-8.png||_mstalt="430248" _mstvisible="3" height="453" width="406"]]
600
601 (% _msthash="315261" _msttexthash="2134964" _mstvisible="1" %)
602 In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]]) , add LHT65 device.
603
604 (% _mstvisible="1" %)
605 [[image:image-20220523000825-9.png||_mstalt="430612" _mstvisible="3" height="366" width="392"]]
606
607 (% _mstvisible="1" %)
608 [[image:image-20220523000825-10.png||_mstalt="450619" _mstvisible="3" height="413" width="728"]]
609
610 (% _mstvisible="1" %)
611 == (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 Datalog Feature(%%) ==
612
613 (% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
614 Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
615
616 (% _mstvisible="1" %)
617 === (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 Ways to get datalog via LoRaWAN(%%) ===
618
619 (% _msthash="315263" _msttexthash="409604" _mstvisible="1" %)
620 There are two methods:
621
622 (% _mstvisible="1" %)
623 1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
624 1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
625
626 (% _mstvisible="1" %)
627 === (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
628
629 (% _msthash="315264" _msttexthash="1182285" _mstvisible="1" %)
630 LHT65N uses Unix TimeStamp format based on
631
632 (% _mstvisible="1" %)
633 [[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
634
635
636 (% _mstvisible="1" %)
637 (((
638 (% _msthash="506068" _msttexthash="2717234" _mstvisible="2" %)
639 User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
640 )))
641
642 (% _mstvisible="1" %)
643 (((
644 (% _msthash="506069" _msttexthash="709813" _mstvisible="2" %)
645 Below is the converter example
646 )))
647
648 (% _mstvisible="1" %)
649 [[image:image-20220523001219-12.png||_mstalt="450827" _mstvisible="3" height="298" width="720"]]
650
651 (% _msthash="315265" _msttexthash="15137317" _mstvisible="1" %)
652 So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
653
654 (% _mstvisible="1" %)
655 === (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 Set Device Time(%%) ===
656
657 (% _mstvisible="1" %)
658 (((
659 (% _msthash="506070" _msttexthash="4521946" _mstvisible="2" %)
660 There are two ways to set device’s time:
661 )))
662
663 (% _mstvisible="1" %)
664 (((
665 (% _mstvisible="2" %)
666 (% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. Through LoRaWAN MAC Command (Default settings)**
667 )))
668
669 (% _mstvisible="1" %)
670 (((
671 (% _msthash="506072" _msttexthash="2126267" _mstvisible="2" %)
672 User need to set SYNCMOD=1 to enable sync time via MAC command.
673 )))
674
675 (% _mstvisible="1" %)
676 (((
677 (% _msthash="506073" _msttexthash="54430324" _mstvisible="2" %)
678 Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
679 )))
680
681 (% _mstvisible="1" %)
682 (((
683 (% _msthash="506074" _msttexthash="92531127" _mstvisible="2" %)
684 Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
685 )))
686
687 (% _mstvisible="1" %)
688 (((
689 (% _mstvisible="2" %)
690
691 )))
692
693 (% _mstvisible="1" %)
694 (((
695 (% _mstvisible="2" %)
696 (% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2. Manually Set Time**
697 )))
698
699 (% _mstvisible="1" %)
700 (((
701 (% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
702 User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
703 )))
704
705 (% _mstvisible="1" %)
706 === (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 Poll sensor value(%%) ===
707
708 (% _msthash="315266" _msttexthash="4955821" _mstvisible="1" %)
709 User can poll sensor value based on timestamps from the server. Below is the downlink command.
710
711 (% _mstvisible="1" %)
712 [[image:image-20220523152302-15.png||_mstalt="451581" _mstvisible="3"]]
713
714 (% _mstvisible="1" %)
715 (((
716 (% _msthash="506077" _msttexthash="14670916" _mstvisible="2" %)
717 Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
718 )))
719
720 (% _mstvisible="1" %)
721 (((
722 (% _mstvisible="2" %)
723 For example, downlink command (% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
724 )))
725
726 (% _mstvisible="1" %)
727 (((
728 (% _msthash="506078" _msttexthash="6907459" _mstvisible="2" %)
729 Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
730 )))
731
732 (% _mstvisible="1" %)
733 (((
734 (% _msthash="506079" _msttexthash="23531573" _mstvisible="2" %)
735 Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
736 )))
737
738
739 (% _mstvisible="1" %)
740 === (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 Datalog Uplink payload(%%) ===
741
742 (% _msthash="315267" _msttexthash="2245087" _mstvisible="1" %)
743 The Datalog poll reply uplink will use below payload format.
744
745 (% _mstvisible="1" %)
746 (((
747 (% _mstvisible="2" %)
748 (% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**Retrieval data payload**
749 )))
750
751 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:510px" %)
752 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:93px" %)(% _mstvisible="5" %)
753 (((
754 (% _mstvisible="6" %)
755 (((
756 (% _mstvisible="7" %)
757 (% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**Size(bytes)**
758 )))
759 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
760 (((
761 (% _mstvisible="6" %)
762 (((
763 (% _mstvisible="7" %)
764 (% _msthash="2224751" _msttexthash="4550" _mstvisible="9" %)**2**
765 )))
766 )))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
767 (((
768 (% _mstvisible="6" %)
769 (((
770 (% _mstvisible="7" %)
771 (% _msthash="2224752" _msttexthash="4550" _mstvisible="9" %)**2**
772 )))
773 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
774 (((
775 (% _mstvisible="6" %)
776 (((
777 (% _mstvisible="7" %)
778 (% _msthash="2224753" _msttexthash="4550" _mstvisible="9" %)**2**
779 )))
780 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
781 (((
782 (% _mstvisible="6" %)
783 (((
784 (% _mstvisible="7" %)
785 (% _msthash="2224754" _msttexthash="4459" _mstvisible="9" %)**1**
786 )))
787 )))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
788 (((
789 (% _mstvisible="6" %)
790 (((
791 (% _mstvisible="7" %)
792 (% _msthash="2224755" _msttexthash="4732" _mstvisible="9" %)**4**
793 )))
794 )))
795 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:93px" %)(% _mstvisible="5" %)
796 (((
797 (% _mstvisible="6" %)
798 (((
799 (% _mstvisible="7" %)
800 (% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**Value**
801 )))
802 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
803 (((
804 (% _mstvisible="6" %)
805 (((
806 (% _mstvisible="7" %)
807 [[External sensor data>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
808 )))
809 )))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
810 (((
811 (% _mstvisible="6" %)
812 (((
813 (% _mstvisible="7" %)
814 (((
815 (% _mstvisible="8" %)
816 [[Built In>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
817 )))
818 )))
819
820 (% _mstvisible="6" %)
821 (((
822 (% _mstvisible="7" %)
823 (((
824 (% _mstvisible="8" %)
825 [[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
826 )))
827 )))
828 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
829 (((
830 (% _mstvisible="6" %)
831 (((
832 (% _mstvisible="7" %)
833 (((
834 (% _mstvisible="8" %)
835 [[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
836 )))
837 )))
838
839 (% _mstvisible="6" %)
840 (((
841 (% _mstvisible="7" %)
842 (((
843 (% _mstvisible="8" %)
844 [[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
845 )))
846 )))
847 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
848 (((
849 (% _mstvisible="6" %)
850 (((
851 (% _msthash="2224758" _msttexthash="390390" _mstvisible="7" %)
852 Poll message flag & Ext
853 )))
854 )))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
855 (((
856 (% _mstvisible="6" %)
857 (((
858 (% _mstvisible="7" %)
859 (((
860 (% _mstvisible="8" %)
861 [[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
862 )))
863 )))
864
865 (% _mstvisible="6" %)
866 (((
867 (% _mstvisible="7" %)
868 (((
869 (% _mstvisible="8" %)
870
871 )))
872 )))
873 )))
874
875 (% _mstvisible="1" %)
876 (% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**Poll message flag & Ext**
877
878 (% _mstvisible="1" %)
879 [[image:image-20220523152208-14.png||_mstalt="452920" _mstvisible="3"]]
880
881 (% _mstvisible="1" %)
882 (((
883 (% _mstvisible="2" %)
884 (((
885 (% _msthash="736723" _msttexthash="2005003" _mstvisible="3" %)
886 Poll Message Flag: 1: This message is a poll message reply.
887 )))
888 )))
889
890 (% _mstvisible="1" %)
891 * (% _mstvisible="3" %)
892 (((
893 (% _mstvisible="4" %)
894 (((
895 (% _msthash="1197157" _msttexthash="561548" _mstvisible="5" %)
896 Poll Message Flag is set to 1.
897 )))
898 )))
899 * (% _mstvisible="3" %)
900 (((
901 (% _mstvisible="4" %)
902 (((
903 (% _msthash="1197158" _msttexthash="9284964" _mstvisible="5" %)
904 Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
905 )))
906 )))
907
908 (% _mstvisible="1" %)
909 (((
910 (% _mstvisible="2" %)
911 (((
912 (% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
913 For example, in US915 band, the max payload for different DR is:
914 )))
915 )))
916
917 (% _mstvisible="1" %)
918 (((
919 (% _mstvisible="2" %)
920 (((
921 (% _msthash="736725" _msttexthash="1065532" _mstvisible="3" %)
922 a) DR0: max is 11 bytes so one entry of data
923 )))
924 )))
925
926 (% _mstvisible="1" %)
927 (((
928 (% _mstvisible="2" %)
929 (((
930 (% _msthash="736726" _msttexthash="3265665" _mstvisible="3" %)
931 b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
932 )))
933 )))
934
935 (% _mstvisible="1" %)
936 (((
937 (% _mstvisible="2" %)
938 (((
939 (% _msthash="736727" _msttexthash="1454115" _mstvisible="3" style="text-align: left;" %)
940 c) DR2: total payload includes 11 entries of data
941 )))
942 )))
943
944 (% _mstvisible="1" %)
945 (((
946 (% _mstvisible="2" %)
947 (((
948 (% _msthash="736728" _msttexthash="1483924" _mstvisible="3" style="text-align: left;" %)
949 d) DR3: total payload includes 22 entries of data.
950 )))
951 )))
952
953 (% _mstvisible="1" %)
954 (((
955 (% _mstvisible="2" %)
956 (((
957 (% _msthash="736729" _msttexthash="5848349" _mstvisible="3" style="text-align: left;" %)
958 If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0   
959 )))
960 )))
961
962
963 (% _mstvisible="1" style="text-align: left;" %)
964 (% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**Example:**
965
966 (% _msthash="315270" _msttexthash="913822" _mstvisible="1" style="text-align: left;" %)
967 If LHT65N has below data inside Flash:
968
969 (% _mstvisible="1" %)
970 [[image:image-20220523144455-1.png||_mstalt="430040" _mstvisible="3" height="335" width="735"]]
971
972 (% _mstvisible="1" %)
973 (((
974 (% _msthash="506081" _msttexthash="1663961" _mstvisible="2" style="text-align: left;" %)
975 If user sends below downlink command: (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
976 )))
977
978 (% _mstvisible="1" %)
979 (((
980 (% _msthash="506082" _msttexthash="1092494" _mstvisible="2" style="text-align: left;" %)
981 Where : Start time: 60065F97 = time 21/1/19 04:27:03
982 )))
983
984 (% _mstvisible="1" %)
985 (((
986 (% _msthash="506083" _msttexthash="737269" _mstvisible="2" style="text-align: left;" %)
987 Stop time 60066DA7= time 21/1/19 05:27:(% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)03
988 )))
989
990 (% _mstvisible="1" %)
991 (((
992 (% _mstvisible="2" %)
993
994 )))
995
996 (% _mstvisible="1" %)
997 (((
998 (% _msthash="506084" _msttexthash="751218" _mstvisible="2" style="text-align: left;" %)
999 LHT65N will uplink this payload.
1000 )))
1001
1002 (% _mstvisible="1" %)
1003 [[image:image-20220523001219-13.png||_mstalt="451204" _mstvisible="3" height="421" style="text-align:left" width="727"]]
1004
1005 (% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
1006 7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1007
1008 Where the first 11 bytes is for the first entry:
1009
1010 7FFF089801464160065F97
1011
1012 Ext sensor data=0x7FFF/100=327.67
1013
1014 Temp=0x0898/100=22.00
1015
1016 Hum=0x0146/10=32.6
1017
1018 poll message flag & Ext=0x41,means reply data,Ext=1
1019
1020 Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1021
1022
1023 (% _mstvisible="1" style="text-align: left;" %)
1024 == (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 Alarm Mode(%%) ==
1025
1026 (% _msthash="315279" _msttexthash="16493308" _mstvisible="1" style="text-align: left;" %)
1027 when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
1028
1029 (% _mstvisible="1" %)
1030 (((
1031 (% _mstvisible="2" style="text-align: left;" %)
1032 (% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.
1033 )))
1034
1035 (% _mstvisible="1" style="text-align: left;" %)
1036 (% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**AT COMMAND FOR ALARM MODE:**
1037
1038 (% _mstvisible="1" class="box infomessage" %)
1039 (((
1040 (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1041 (% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1042
1043 (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1044 (% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1045
1046 (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1047 (% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1048
1049 (% _mstvisible="2" style="text-align: left;" %)
1050 (% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1051
1052 (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1053 (% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1054 )))
1055
1056 (% _msthash="72514" _msttexthash="253149" _mstvisible="1" style="text-align: left;" %)
1057 == (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%)LED Indicator ==
1058
1059 (% _mstvisible="1" %)
1060 (((
1061 (% _msthash="197769" _msttexthash="2924142" style="text-align: left;" %)
1062 The LHT65 has a triple color LED which for easy showing different stage .
1063
1064 (% _msthash="289211" _msttexthash="3402659" style="text-align: left;" %)
1065 While user press ACT button, the LED will work as per LED status with ACT button.
1066 )))
1067
1068 (% _mstvisible="1" %)
1069 (((
1070 (% _msthash="506092" _msttexthash="521573" _mstvisible="2" style="text-align: left;" %)
1071 In a normal working state:
1072 )))
1073
1074 (% _mstvisible="1" %)
1075 * (% _mstvisible="3" %)
1076 (((
1077 (% _msthash="903005" _msttexthash="1647204" _mstvisible="4" %)
1078 For each uplink, the BLUE LED or RED LED will blink (% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)once(%%).(% style="display:none" %)
1079
1080 (% _msthash="197771" _msttexthash="1202526" %)
1081 (% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)BLUE LED when external sensor is connected
1082 )))
1083 * (% _mstvisible="3" %)
1084 (((
1085 (% _msthash="903007" _msttexthash="1334749" _mstvisible="4" %)
1086 RED LED when external sensor is not connected
1087 )))
1088 * (% _mstvisible="3" %)
1089 (((
1090 (% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1091 For each success downlink, the PURPLE LED will blink once
1092 )))
1093
1094 (% _mstvisible="1" %)
1095 ----
1096
1097 (% _mstvisible="1" style="text-align: left;" %)
1098 == (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 installation(%%) ==
1099
1100 (% _mstvisible="1" %)
1101 [[image:image-20220516231650-1.png||_mstalt="428597" _mstvisible="3" height="436" width="428"]]
1102
1103 (% _msthash="604150" _msttexthash="563212" _mstvisible="1" style="text-align: left;" %)
1104 = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1105
1106 (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1107 == (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
1108
1109 (% _mstvisible="1" %)
1110 [[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
1111
1112
1113 (% _msthash="315354" _msttexthash="1270971" _mstvisible="1" style="text-align: left;" %)
1114 Temperature sensor with 2 meters cable long
1115
1116 (% _mstvisible="1" %)
1117 * Resolution: 0.0625 °C
1118 * ±0.5°C accuracy from -10°C to +85°C
1119 * ±2°C accuracy from -55°C to +125°C
1120 * Operating Range: -40 ~~ 125 °C
1121 * -55°C to 125°C
1122 * Working voltage 2.35v ~~ 5v
1123
1124 (% _mstvisible="1" style="text-align: left;" %)
1125 = (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1126
1127 (% _mstvisible="1" %)
1128 (((
1129 (% _msthash="506246" _msttexthash="2005926" _mstvisible="2" style="text-align: left;" %)
1130 Use can configure LHT65N via AT Command or LoRaWAN Downlink.
1131 )))
1132
1133 (% _mstvisible="1" %)
1134 * (% _mstvisible="3" %)
1135 (((
1136 (% _msthash="903318" _msttexthash="635544" _mstvisible="4" %)
1137 AT Command Connection: See [[FAQ>>path:#AT_COMMAND||_mstvisible="5"]].
1138 )))
1139 * (% _mstvisible="3" %)
1140 (((
1141 (% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
1142 LoRaWAN Downlink instruction for different platforms:
1143 )))
1144
1145 (% _mstvisible="1" %)
1146 (((
1147 (% _mstvisible="2" style="text-align: left;" %)
1148 [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server||_msthash="506247" _msttexthash="3599349" _mstvisible="3"]]
1149 )))
1150
1151 (% _mstvisible="1" %)
1152 (((
1153 (% _msthash="506248" _msttexthash="2144051" _mstvisible="2" style="text-align: left;" %)
1154 There are two kinds of commands to configure LHT65N, they are:
1155 )))
1156
1157 (% _mstvisible="1" %)
1158 (((
1159 (% _mstvisible="2" style="text-align: left;" %)
1160 (% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1161 )))
1162
1163 (% _mstvisible="1" %)
1164 (((
1165 (% _msthash="506250" _msttexthash="774527" _mstvisible="2" style="text-align: left;" %)
1166 These commands are to configure:
1167 )))
1168
1169 (% _mstvisible="1" %)
1170 * (% _mstvisible="3" %)
1171 (((
1172 (% _msthash="903320" _msttexthash="1503580" _mstvisible="4" %)
1173 General system settings like: uplink interval.
1174 )))
1175 * (% _mstvisible="3" %)
1176 (((
1177 (% _msthash="903321" _msttexthash="1244334" _mstvisible="4" %)
1178 LoRaWAN protocol & radio-related commands.
1179 )))
1180
1181 (% _mstvisible="1" %)
1182 (((
1183 (% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
1184 They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
1185 )))
1186
1187 (% _mstvisible="1" %)
1188 (((
1189 (% _mstvisible="2" style="text-align: left;" %)
1190 [[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command||_msthash="506252" _msttexthash="3434769" _mstvisible="3"]]
1191 )))
1192
1193 (% _mstvisible="1" %)
1194 (((
1195 (% _mstvisible="2" style="text-align: left;" %)
1196 (% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506253" _msttexthash="792038" _mstvisible="4" %)**Commands special design for LHT65N**
1197 )))
1198
1199 (% _mstvisible="1" %)
1200 (((
1201 (% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1202 These commands are only valid for LHT65N, as below:
1203 )))
1204
1205 (% _mstvisible="1" style="text-align: left;" %)
1206 == (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 Set Transmit Interval Time(%%) ==
1207
1208 (% _msthash="315355" _msttexthash="1659268" _mstvisible="1" style="text-align: left;" %)
1209 Feature: Change LoRaWAN End Node Transmit Interval.
1210
1211 (% _mstvisible="1" style="text-align: left;" %)
1212 (% _msthash="315356" _msttexthash="241696" _mstvisible="3" %)**AT Command: AT+TDC**
1213
1214 (% _mstvisible="1" %)
1215 [[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
1216
1217 (% _mstvisible="1" %)
1218 (((
1219 (% _mstvisible="2" style="text-align: left;" %)
1220 (% _msthash="506255" _msttexthash="381992" _mstvisible="4" %)**Downlink Command: 0x01**
1221 )))
1222
1223 (% _mstvisible="1" %)
1224 (((
1225 (% _msthash="506256" _msttexthash="1996592" _mstvisible="2" style="text-align: left;" %)
1226 Format: Command Code (0x01) followed by 3 bytes time value.
1227 )))
1228
1229 (% _mstvisible="1" %)
1230 (((
1231 (% _msthash="506257" _msttexthash="12934649" _mstvisible="2" style="text-align: left;" %)
1232 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1233 )))
1234
1235 (% _mstvisible="1" %)
1236 * (% _mstvisible="3" %)
1237 (((
1238 (% _msthash="903322" _msttexthash="3250546" _mstvisible="4" %)
1239 (% _mstvisible="5" %)**Example 1**(%%): Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1240 )))
1241 * (% _mstvisible="3" %)
1242 (((
1243 (% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1244 (% _mstvisible="5" %)**Example 2**(%%): Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1245 )))
1246
1247 (% _mstvisible="1" style="text-align: left;" %)
1248 == (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 Set External Sensor Mode(%%) ==
1249
1250 (% _msthash="315357" _msttexthash="975117" _mstvisible="1" style="text-align: left;" %)
1251 Feature: Change External Sensor Mode.
1252
1253 (% _mstvisible="1" style="text-align: left;" %)
1254 (% _msthash="315358" _msttexthash="248118" _mstvisible="3" %)**AT Command: AT+EXT**
1255
1256 (% _mstvisible="1" %)
1257 [[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
1258
1259 (% _mstvisible="1" %)
1260 (((
1261 (% _mstvisible="2" style="text-align: left;" %)
1262 (% _msthash="506258" _msttexthash="387855" _mstvisible="4" %)**Downlink Command: 0xA2**
1263 )))
1264
1265 (% _mstvisible="1" %)
1266 (((
1267 (% _msthash="506259" _msttexthash="395629" _mstvisible="2" style="text-align: left;" %)
1268 Total bytes: 2 ~~ 5 bytes
1269 )))
1270
1271 (% _mstvisible="1" %)
1272 (((
1273 (% _mstvisible="2" %)
1274 (% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**Example:**
1275 )))
1276
1277 (% _mstvisible="1" %)
1278 * (% _mstvisible="3" %)
1279 (((
1280 (% _msthash="903324" _msttexthash="934973" _mstvisible="4" %)
1281 0xA201: Set external sensor type to E1
1282 )))
1283 * (% _mstvisible="3" %)
1284 (((
1285 (% _msthash="903325" _msttexthash="354770" _mstvisible="4" %)
1286 0xA209: Same as AT+EXT=9
1287 )))
1288 * (% _mstvisible="3" %)
1289 (((
1290 (% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1291 0xA20702003c,Same as AT+SETCNT=60
1292 )))
1293
1294 (% _mstvisible="1" style="text-align: left;" %)
1295 == (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 Enable/Disable uplink Temperature probe ID(%%) ==
1296
1297 (% _msthash="315359" _msttexthash="2977572" _mstvisible="1" style="text-align: left;" %)
1298 Feature: If PID is enabled, device will send the temperature probe ID on:
1299
1300 (% _mstvisible="1" %)
1301 * First Packet after OTAA Join
1302 * Every 24 hours since the first packet.
1303
1304 (% _msthash="315360" _msttexthash="658814" _mstvisible="1" style="text-align: left;" %)
1305 PID is default set to disable (0)
1306
1307 (% _mstvisible="1" style="text-align: left;" %)
1308 (% _msthash="315361" _msttexthash="137488" _mstvisible="3" %)**AT Command:**
1309
1310 (% _mstvisible="1" %)
1311 [[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
1312
1313 (% _mstvisible="1" style="text-align: left;" %)
1314 (% _msthash="315362" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1315
1316 (% _mstvisible="1" %)
1317 * 0xA800  **~-~->** AT+PID=0
1318 * 0xA801     **~-~->** AT+PID=1
1319
1320 (% _mstvisible="1" style="text-align: left;" %)
1321 == (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1322
1323 (% _msthash="315363" _msttexthash="1170728" _mstvisible="1" style="text-align: left;" %)
1324 Feature: Set device password, max 9 digits
1325
1326 (% _mstvisible="1" style="text-align: left;" %)
1327 (% _msthash="315364" _msttexthash="295009" _mstvisible="3" %)**AT Command: AT+PWORD**
1328
1329 (% _mstvisible="1" %)
1330 [[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
1331
1332 (% _mstvisible="1" %)
1333 (((
1334 (% _mstvisible="2" style="text-align: left;" %)
1335 (% _msthash="506261" _msttexthash="298038" _mstvisible="4" %)**Downlink Command:**
1336 )))
1337
1338 (% _mstvisible="1" %)
1339 (((
1340 (% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1341 No downlink command for this feature.
1342 )))
1343
1344 (% _mstvisible="1" style="text-align: left;" %)
1345 == (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 Quit AT Command(%%) ==
1346
1347 (% _msthash="315365" _msttexthash="4616456" _mstvisible="1" style="text-align: left;" %)
1348 Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1349
1350 (% _mstvisible="1" style="text-align: left;" %)
1351 (% _msthash="315366" _msttexthash="289120" _mstvisible="3" %)**AT Command: AT+DISAT**
1352
1353 (% _mstvisible="1" %)
1354 [[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
1355
1356 (% _mstvisible="1" style="text-align: left;" %)
1357 (% _msthash="315367" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1358
1359 (% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1360 No downlink command for this feature.
1361
1362 (% _mstvisible="1" style="text-align: left;" %)
1363 == (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 Set to sleep mode(%%) ==
1364
1365 (% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
1366 Feature: Set device to sleep mode
1367
1368 (% _mstvisible="1" style="text-align: left;" %)
1369 (% _msthash="315370" _msttexthash="289783" _mstvisible="3" %)**AT Command: AT+SLEEP**
1370
1371 (% _mstvisible="1" %)
1372 [[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1373
1374 (% _mstvisible="1" %)
1375 (% _msthash="315371" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1376
1377 (% _mstvisible="1" %)
1378 * There is no downlink command to set to Sleep mode.
1379
1380 (% _mstvisible="1" %)
1381 == (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1382
1383 (% _msthash="315372" _msttexthash="2565524" _mstvisible="1" %)
1384 Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp" _mstvisible="2"]]
1385
1386 (% _mstvisible="1" %)
1387 (% _msthash="315373" _msttexthash="137488" _mstvisible="3" %)**AT Command:**
1388
1389 (% _mstvisible="1" %)
1390 [[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
1391
1392 (% _mstvisible="1" %)
1393 (% _msthash="315374" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1394
1395 (% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1396 0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
1397
1398 (% _mstvisible="1" %)
1399 == (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 Set Time Sync Mode(%%) ==
1400
1401 (% _mstvisible="1" %)
1402 (((
1403 (% _msthash="506263" _msttexthash="11748321" _mstvisible="2" %)
1404 Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
1405 )))
1406
1407 (% _mstvisible="1" %)
1408 (((
1409 (% _msthash="506264" _msttexthash="6530264" _mstvisible="2" %)
1410 SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
1411 )))
1412
1413 (% _mstvisible="1" %)
1414 (((
1415 (% _mstvisible="2" %)
1416 (% _msthash="506265" _msttexthash="137488" _mstvisible="4" %)**AT Command:**
1417 )))
1418
1419 (% _mstvisible="1" %)
1420 [[image:image-20220523151336-9.png||_mstalt="431717" _mstvisible="3"]]
1421
1422 (% _mstvisible="1" %)
1423 (% _msthash="315376" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1424
1425 (% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1426 0x28 01 ~/~/ Same As AT+SYNCMOD=1
1427
1428 (% _msthash="315378" _msttexthash="479076" _mstvisible="1" %)
1429 0x28 00 ~/~/ Same As AT+SYNCMOD=0
1430
1431 (% _mstvisible="1" %)
1432 == (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 Set Time Sync Interval(%%) ==
1433
1434 (% _msthash="315379" _msttexthash="3065777" _mstvisible="1" %)
1435 Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1436
1437 (% _mstvisible="1" %)
1438 (% _msthash="315380" _msttexthash="137488" _mstvisible="3" %)**AT Command:**
1439
1440 (% _mstvisible="1" %)
1441 [[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
1442
1443 (% _mstvisible="1" %)
1444 (% _msthash="315381" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1445
1446 (% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1447 0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
1448
1449 (% _mstvisible="1" %)
1450 == (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 Print data entries base on page.(%%) ==
1451
1452 (% _msthash="315383" _msttexthash="3233334" _mstvisible="1" %)
1453 Feature: Print the sector data from start page to stop page (max is 416 pages).
1454
1455 (% _mstvisible="1" %)
1456 (% _msthash="315384" _msttexthash="264953" _mstvisible="3" %)**AT Command: AT+PDTA**
1457
1458 (% _mstvisible="1" %)
1459 [[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
1460
1461 (% _mstvisible="1" %)
1462 (% _msthash="315385" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1463
1464 (% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1465 No downlink commands for feature
1466
1467 (% _mstvisible="1" %)
1468 == (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 Print last few data entries.(%%) ==
1469
1470 (% _msthash="315387" _msttexthash="1101009" _mstvisible="1" %)
1471 Feature: Print the last few data entries
1472
1473 (% _mstvisible="1" %)
1474 (% _msthash="315388" _msttexthash="288522" _mstvisible="3" %)**AT Command: AT+PLDTA**
1475
1476 (% _mstvisible="1" %)
1477 [[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
1478
1479 (% _mstvisible="1" %)
1480 (% _msthash="315389" _msttexthash="298038" _mstvisible="3" %)**Downlink Command:**
1481
1482 (% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1483 No downlink commands for feature
1484
1485 (% _mstvisible="1" %)
1486 == (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 Clear Flash Record(%%) ==
1487
1488 (% _msthash="315391" _msttexthash="1609075" _mstvisible="1" %)
1489 Feature: Clear flash storage for data log feature.
1490
1491 (% _mstvisible="1" %)
1492 (% _msthash="315392" _msttexthash="311415" _mstvisible="3" %)**AT Command: AT+CLRDTA**
1493
1494 (% _mstvisible="1" %)
1495 [[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
1496
1497 (% _mstvisible="1" %)
1498 (% _msthash="315393" _msttexthash="388193" _mstvisible="3" %)**Downlink Command: 0xA3**
1499
1500 (% _mstvisible="1" %)
1501 * Example: 0xA301 ~/~/Same as AT+CLRDTA
1502
1503 (% _mstvisible="1" %)
1504 == (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1505
1506 (% _msthash="315394" _msttexthash="51837149" _mstvisible="1" %)
1507 Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
1508
1509
1510 (% _mstvisible="1" %)
1511 (% _msthash="315395" _msttexthash="334256" _mstvisible="3" %)**AT Command: AT+PNACKMD**
1512
1513 (% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1514 The default factory setting is 0
1515
1516 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1517 (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**Command Example**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**Function**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**Response**
1518 (% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1519
1520 (% _mstvisible="1" %)
1521 (% _msthash="315397" _msttexthash="383981" _mstvisible="3" %)**Downlink Command: 0x34**
1522
1523 (% _mstvisible="1" %)
1524 * Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1525
1526 (% _mstvisible="1" %)
1527 = (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1528
1529 (% _mstvisible="1" %)
1530 == (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 Battery Type(%%) ==
1531
1532 (% _msthash="315398" _msttexthash="33754799" _mstvisible="1" %)
1533 LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1534
1535 (% _mstvisible="1" %)
1536 (((
1537 (% _mstvisible="2" %)
1538 The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1539 [[image:image-20220515075034-1.png||_mstalt="428961" _mstvisible="4" height="208" width="644"]]
1540 )))
1541
1542 (% _mstvisible="1" %)
1543 (((
1544 (% _mstvisible="2" %)
1545 The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1546
1547 )))
1548
1549 (% _mstvisible="1" %)
1550 == (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 Replace Battery(%%) ==
1551
1552 (% _msthash="315399" _msttexthash="11289278" _mstvisible="1" %)
1553 LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
1554
1555 (% _mstvisible="1" %)
1556 [[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1557
1558 (% _mstvisible="1" %)
1559 == (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1560
1561 (% _mstvisible="1" %)
1562 (((
1563 (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1564 Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1565 https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
1566 )))
1567
1568 (% _mstvisible="1" %)
1569 = (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. Order Info(%%) =
1570
1571 (% _mstvisible="1" %)
1572 (((
1573 (% _msthash="506267" _msttexthash="432432" _mstvisible="2" %)
1574 Part Number: (% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
1575 )))
1576
1577 (% _mstvisible="1" %)
1578 (((
1579 (% _msthash="506268" _msttexthash="686946" _mstvisible="2" %)
1580 (% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%): The default frequency band
1581 )))
1582
1583 (% _mstvisible="1" %)
1584 * (% _mstvisible="3" %)
1585 (((
1586 (% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
1587 (% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1588 )))
1589 * (% _mstvisible="3" %)
1590 (((
1591 (% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
1592 (% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1593 )))
1594 * (% _mstvisible="3" %)
1595 (((
1596 (% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
1597 (% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1598 )))
1599 * (% _mstvisible="3" %)
1600 (((
1601 (% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
1602 (% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1603 )))
1604 * (% _mstvisible="3" %)
1605 (((
1606 (% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
1607 (% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1608 )))
1609 * (% _mstvisible="3" %)
1610 (((
1611 (% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
1612 (% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1613 )))
1614 * (% _mstvisible="3" %)
1615 (((
1616 (% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
1617 (% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1618 )))
1619 * (% _mstvisible="3" %)
1620 (((
1621 (% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
1622 (% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1623 )))
1624
1625 (% _mstvisible="1" %)
1626 (((
1627 (% _msthash="506269" _msttexthash="443495" _mstvisible="2" %)
1628 (% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1629 )))
1630
1631 (% _mstvisible="1" %)
1632 * (% _mstvisible="3" %)
1633 (((
1634 (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
1635 (% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1636 )))
1637
1638 (% _mstvisible="1" %)
1639 = (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)7. Packing Info(%%) =
1640
1641 (% _mstvisible="1" %)
1642 (((
1643 (% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
1644 (% _mstvisible="3" %)**Package Includes**(%%):
1645 )))
1646
1647 (% _mstvisible="1" %)
1648 * (% _mstvisible="3" %)
1649 (((
1650 (% _msthash="903336" _msttexthash="1033149" _mstvisible="4" %)
1651 LHT65N Temperature & Humidity Sensor x 1
1652 )))
1653 * (% _mstvisible="3" %)
1654 (((
1655 (% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
1656 Program cable x 1
1657 )))
1658 * (% _mstvisible="3" %)
1659 (((
1660 (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
1661 Optional external sensor
1662 )))
1663
1664 (% _mstvisible="1" %)
1665 (((
1666 (% _msthash="506271" _msttexthash="403858" _mstvisible="2" %)
1667 (% _mstvisible="3" %)**Dimension and weight**(%%):
1668 )))
1669
1670 (% _mstvisible="1" %)
1671 * (% _mstvisible="3" %)
1672 (((
1673 (% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
1674 Device Size:  13.5 x 7 x 3 cm
1675 )))
1676 * (% _mstvisible="3" %)
1677 (((
1678 (% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
1679 Device Weight: 105g
1680 )))
1681 * (% _mstvisible="3" %)
1682 (((
1683 (% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
1684 Package Size / pcs : 14.5 x 8 x 5 cm
1685 )))
1686 * (% _mstvisible="3" %)
1687 (((
1688 (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1689 Weight / pcs : 170g
1690 )))
1691
1692 (% _mstvisible="1" %)
1693 = (% _msthash="198744" _msttexthash="178776" _mstvisible="3" %)8. FCC Warning(%%) =
1694
1695 (% _mstvisible="1" %)
1696 (((
1697 (% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
1698 This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1699 )))
1700
1701 (% _mstvisible="1" %)
1702 (((
1703 (% _msthash="506273" _msttexthash="44097638" _mstvisible="2" %)
1704 (1) This device may not cause harmful interference；
1705 )))
1706
1707 (% _mstvisible="1" %)
1708 (((
1709 (% _msthash="506274" _msttexthash="7559773" _mstvisible="2" %)
1710 (2) this device must accept any interference received, including interference that may cause undesired operation.
1711 )))

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0