Skip to Content
Version 120.7 by Xiaoling on 2022/06/09 18:29
Show last authors
1 (% _mstvisible="2" style="text-align:center" %)
2 [[image:image-20220523115324-1.jpeg||_mstalt="469677" _mstvisible="4" height="317" width="317"]]
3
4
5 (% _mstvisible="1" %)
6 (% _msthash="315237" _msttexthash="1697033" _mstvisible="3" %)**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
7
8
9
10
11 (% _mstvisible="1" %)
12 (% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
13
14 {{toc/}}
15
16
17
18
19 (% _mstvisible="1" %)
20 = (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)1. Introduction(%%) =
21
22 (% _mstvisible="1" %)
23 == (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 What is LHT65N Temperature & Humidity Sensor(%%) ==
24
25 (% _mstvisible="1" %)
26 (((
27 (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
29 )))
30
31 (% _mstvisible="1" %)
32 (((
33 (% _msthash="506052" _msttexthash="66005810" _mstvisible="2" %)
34 The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
35 )))
36
37 (% _mstvisible="1" %)
38 (((
39 (% _msthash="506053" _msttexthash="4298047" _mstvisible="2" %)
40 LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
41 )))
42
43 (% _mstvisible="1" %)
44 (((
45 (% _msthash="506054" _msttexthash="6016374" _mstvisible="2" %)
46 LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
47 )))
48
49 (% _mstvisible="1" %)
50 (((
51 (% _msthash="506055" _msttexthash="17023136" _mstvisible="2" %)
52 LHT65N supports (% _mstvisible="4" style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
53 )))
54
55 (% _mstvisible="1" %)
56 (((
57 (% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
58 *The actual battery life depends on how often to send data, please see the battery analyzer chapter.
59
60 (% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
61
62 )))
63
64 (% _mstvisible="1" %)
65 == (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 Features(%%) ==
66
67 (% _mstvisible="1" %)
68 * Wall mountable
69 * LoRaWAN v1.0.3 Class A protocol
70 * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
71 * AT Commands to change parameters
72 * Remote configure parameters via LoRaWAN Downlink
73 * Firmware upgradeable via program port
74 * Built-in 2400mAh battery for up to 10 years of use.
75 * Built-in Temperature & Humidity sensor
76 * Optional External Sensors
77 * Tri-color LED to indicate working status
78 * Datalog feature
79
80 (% _mstvisible="1" %)
81 == (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
82
83 (% _mstvisible="1" %)
84 (((
85 (% _mstvisible="2" %)
86
87
88 (% _mstvisible="2" %)
89 (% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**Built-in Temperature Sensor:**
90 )))
91
92 (% _mstvisible="1" %)
93 * (% _mstvisible="3" %)
94 (((
95 (% _msthash="902993" _msttexthash="294424" _mstvisible="4" %)
96 Resolution: 0.01 °C
97 )))
98 * (% _mstvisible="3" %)
99 (((
100 (% _msthash="902994" _msttexthash="690664" _mstvisible="4" %)
101 Accuracy Tolerance : Typ ±0.3 °C
102 )))
103 * (% _mstvisible="3" %)
104 (((
105 (% _msthash="902995" _msttexthash="504647" _mstvisible="4" %)
106 Long Term Drift: < 0.02 °C/yr
107 )))
108 * (% _mstvisible="3" %)
109 (((
110 (% _msthash="902996" _msttexthash="478257" _mstvisible="4" %)
111 Operating Range: -40 ~~ 85 °C
112 )))
113
114 (% _mstvisible="1" %)
115 (((
116 (% _mstvisible="2" %)
117
118
119 (% _mstvisible="2" %)
120 (% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**Built-in Humidity Sensor:**
121 )))
122
123 (% _mstvisible="1" %)
124 * (% _mstvisible="3" %)
125 (((
126 (% _msthash="902997" _msttexthash="282438" _mstvisible="4" %)
127 Resolution: 0.04 %RH
128 )))
129 * (% _mstvisible="3" %)
130 (((
131 (% _msthash="902998" _msttexthash="628771" _mstvisible="4" %)
132 Accuracy Tolerance : Typ ±3 %RH
133 )))
134 * (% _mstvisible="3" %)
135 (((
136 (% _msthash="902999" _msttexthash="504647" _mstvisible="4" %)
137 Long Term Drift: < 0.02 °C/yr
138 )))
139 * (% _mstvisible="3" %)
140 (((
141 (% _msthash="903000" _msttexthash="421291" _mstvisible="4" %)
142 Operating Range: 0 ~~ 96 %RH
143 )))
144
145 (% _mstvisible="1" %)
146 (((
147 (% _mstvisible="2" %)
148
149
150 (% _mstvisible="2" %)
151 (% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**External Temperature Sensor:**
152 )))
153
154 (% _mstvisible="1" %)
155 * (% _mstvisible="3" %)
156 (((
157 (% _msthash="903001" _msttexthash="332254" _mstvisible="4" %)
158 Resolution: 0.0625 °C
159 )))
160 * (% _mstvisible="3" %)
161 (((
162 (% _msthash="903002" _msttexthash="782600" _mstvisible="4" %)
163 ±0.5°C accuracy from -10°C to +85°C
164 )))
165 * (% _mstvisible="3" %)
166 (((
167 (% _msthash="903003" _msttexthash="729482" _mstvisible="4" %)
168 ±2°C accuracy from -55°C to +125°C
169 )))
170 * (% _mstvisible="3" %)
171 (((
172 (% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
173 Operating Range: -55 °C ~~ 125 °C
174
175
176 (% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
177
178 )))
179
180 (% _mstvisible="1" %)
181 = (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. Connect LHT65N to IoT Server(%%) =
182
183 (% _mstvisible="1" %)
184 == (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 How does LHT65N work?(%%) ==
185
186 (% _mstvisible="1" %)
187 (((
188 (% _msthash="506060" _msttexthash="28254538" _mstvisible="2" %)
189 LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
190 )))
191
192 (% _mstvisible="1" %)
193 (((
194 (% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
195 If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
196
197 (% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
198
199 )))
200
201 (% _mstvisible="1" %)
202 == (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 How to Activate LHT65N?(%%) ==
203
204 (% _msthash="315239" _msttexthash="748241" _mstvisible="1" %)
205 The LHT65N has two working modes:
206
207 (% _mstvisible="1" %)
208 * **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
209 * **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
210
211 (% _mstvisible="1" %)
212 (((
213 (% _msthash="506062" _msttexthash="6036823" _mstvisible="2" %)
214 The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
215 )))
216
217 (% _mstvisible="1" %)
218 [[image:image-20220515123819-1.png||_mstalt="430742" _mstvisible="3" height="379" width="317"]]
219
220 (% _mstvisible="1" %)
221 [[image:image-20220525110604-2.png||_mstalt="427531" _mstvisible="3"]]
222
223
224 (% _mstvisible="1" %)
225 == (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 Example to join LoRaWAN network(%%) ==
226
227 (% _msthash="315240" _msttexthash="9205482" _mstvisible="1" class="wikigeneratedid" %)
228 This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
229
230 (% _mstvisible="1" class="wikigeneratedid" %)
231 [[image:image-20220522232442-1.png||_mstalt="427830" _mstvisible="3" height="387" width="648"]]
232
233 (% _msthash="315241" _msttexthash="10802155" _mstvisible="1" %)
234 Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
235
236
237 (% _mstvisible="1" %)
238 === (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 Step 1: Create Device n TTN(%%) ===
239
240 (% _msthash="315242" _msttexthash="1601782" _mstvisible="1" %)
241 Create a device in TTN V3 with the OTAA keys from LHT65N.
242
243 (% _msthash="315243" _msttexthash="3694444" _mstvisible="1" %)
244 Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
245
246 (% _mstvisible="1" %)
247 [[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
248
249 (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
250 User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
251
252 (% _msthash="315245" _msttexthash="642889" _mstvisible="1" %)
253 Add APP EUI in the application.
254
255 (% _mstvisible="1" %)
256 [[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]
257
258 (% _mstvisible="1" %)
259 [[image:image-20220522232932-4.png||_mstalt="430157" _mstvisible="3"]]
260
261 (% _mstvisible="1" %)
262 [[image:image-20220522232954-5.png||_mstalt="431847" _mstvisible="3"]]
263
264 (% _msthash="315246" _msttexthash="878800" _mstvisible="1" %)
265 Note: LHT65N use same payload as LHT65.
266
267 (% _mstvisible="1" %)
268 [[image:image-20220522233026-6.png||_mstalt="429403" _mstvisible="3"]]
269
270
271 (% _msthash="315247" _msttexthash="595543" _mstvisible="1" %)
272 Input APP EUI,  APP KEY and DEV EUI:
273
274 (% _mstvisible="1" %)
275 [[image:image-20220522233118-7.png||_mstalt="430430" _mstvisible="3"]]
276
277
278 (% _mstvisible="1" %)
279 === (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds.(%%) ===
280
281 (% _msthash="315248" _msttexthash="14452321" _mstvisible="1" %)
282 Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
283
284 (% _mstvisible="1" %)
285 [[image:image-20220522233300-8.png||_mstalt="428389" _mstvisible="3" height="219" width="722"]]
286
287
288 (% _mstvisible="1" %)
289 == (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 Uplink Payload(%%) ==
290
291 (% _msthash="315249" _msttexthash="7722962" _mstvisible="1" %)
292 The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% _mstvisible="3" style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
293
294 (% _msthash="315250" _msttexthash="1322711" _mstvisible="1" %)
295 After each uplink, the (% _mstvisible="3" style="color:blue" %)**BLUE LED**(%%) will blink once.
296
297 (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)
298 (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)
299 (((
300 (% _mstvisible="6" %)
301 (% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
302 )))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)
303 (((
304 (% _mstvisible="6" %)
305 (% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**
306 )))|=(% _mstvisible="4" style="width: 100px;" %)(% _mstvisible="5" %)
307 (((
308 (% _mstvisible="6" %)
309 (% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**
310 )))|=(% _mstvisible="4" style="width: 77px;" %)(% _mstvisible="5" %)
311 (((
312 (% _mstvisible="6" %)
313 (% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**
314 )))|=(% _mstvisible="4" style="width: 47px;" %)(% _mstvisible="5" %)
315 (((
316 (% _mstvisible="6" %)
317 (% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**
318 )))|=(% _mstvisible="4" style="width: 51px;" %)(% _mstvisible="5" %)
319 (((
320 (% _mstvisible="6" %)
321 (% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**
322 )))
323 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
324 (((
325 (% _mstvisible="6" %)
326 (% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**
327 )))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
328 (((
329 (% _mstvisible="6" %)
330 [[BAT>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
331 )))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
332 (((
333 (% _mstvisible="6" %)
334 (((
335 (% _mstvisible="7" %)
336 [[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
337 )))
338 )))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
339 (((
340 (% _mstvisible="6" %)
341 (((
342 (% _mstvisible="7" %)
343 [[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
344 )))
345
346 (% _mstvisible="6" %)
347 (((
348 (% _mstvisible="7" %)
349 [[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
350 )))
351 )))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
352 (((
353 (% _mstvisible="6" %)
354 [[Ext>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
355 )))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
356 (((
357 (% _mstvisible="6" %)
358 [[Ext value>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
359 )))
360
361 (% _mstvisible="1" %)
362 * The First 6 bytes: has fix meanings for every LHT65N.
363 * The 7th byte (EXT #): defines the external sensor model.
364 * The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
365
366 (% _mstvisible="1" %)
367 === (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
368
369 (% _msthash="315251" _msttexthash="9786491" _mstvisible="1" %)
370 When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
371
372 (% _msthash="315252" _msttexthash="3928483" _mstvisible="1" %)
373 Below is the position to put the decoder and LHT65N decoder can be download from here:
374
375 (% _mstvisible="1" %)
376 [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0||_msthash="315253" _msttexthash="3509064" _mstvisible="2"]]
377
378 (% _mstvisible="1" %)
379 [[image:image-20220522234118-10.png||_mstalt="451464" _mstvisible="3" height="353" width="729"]]
380
381
382
383 (% _mstvisible="1" %)
384 === (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-Battery Info(%%) ===
385
386 (% _msthash="315254" _msttexthash="3122912" _mstvisible="1" %)
387 These two bytes of BAT include the battery state and the actually voltage
388
389 (% _mstvisible="1" %)
390 [[image:image-20220523152839-18.png||_mstalt="457613" _mstvisible="3"]]
391
392 (% _mstvisible="1" %)
393 [[image:image-20220522235639-1.png||_mstalt="431392" _mstvisible="3" height="139" width="727"]]
394
395 (% _msthash="315255" _msttexthash="871611" _mstvisible="1" %)
396 Check the battery voltage for LHT65N.
397
398 (% _mstvisible="1" %)
399 * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
400 * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
401
402 (% _mstvisible="1" %)
403 === (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
404
405 (% _mstvisible="1" %)
406 [[image:image-20220522235639-2.png||_mstalt="431756" _mstvisible="3" height="138" width="722"]]
407
408 (% _mstvisible="1" %)
409 * Temperature:  0x0ABB/100=27.47℃
410
411 (% _mstvisible="1" %)
412 [[image:image-20220522235639-3.png||_mstalt="432120" _mstvisible="3"]]
413
414 (% _mstvisible="1" %)
415 * Temperature:  (0xF5C6-65536)/100=-26.18℃
416
417 (% _mstvisible="1" %)
418 === (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
419
420 (% _mstvisible="1" %)
421 [[image:image-20220522235639-4.png||_mstalt="432484" _mstvisible="3" height="138" width="722"]]
422
423 (% _mstvisible="1" %)
424 * Humidity:    0x025C/10=60.4%
425
426 (% _mstvisible="1" %)
427 === (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
428
429 (% _msthash="315256" _msttexthash="552240" _mstvisible="1" %)
430 Bytes for External Sensor:
431
432 (% _mstvisible="1" %)
433 [[image:image-20220523152822-17.png||_mstalt="454545" _mstvisible="3"]]
434
435
436 (% _mstvisible="1" %)
437 === (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 Ext value(%%) ===
438
439 (% _mstvisible="1" %)
440 ==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1, E3 Temperature Sensor(%%) ====
441
442 (% _mstvisible="1" %)
443 [[image:image-20220522235639-5.png||_mstalt="432848" _mstvisible="3"]]
444
445
446 (% _mstvisible="1" %)
447 * DS18B20 temp=0x0ADD/100=27.81℃
448
449 (% _msthash="315257" _msttexthash="1038479" _mstvisible="1" %)
450 The last 2 bytes of data are meaningless
451
452 (% _mstvisible="1" %)
453 [[image:image-20220522235639-6.png||_mstalt="433212" _mstvisible="3"]]
454
455
456 (% _mstvisible="1" %)
457 * External temperature= (0xF54F-65536)/100=-27.37℃
458
459 (% _mstvisible="1" %)
460 (((
461 (% _msthash="506063" _msttexthash="1038479" _mstvisible="2" %)
462 The last 2 bytes of data are meaningless
463 )))
464
465 (% _mstvisible="1" %)
466 (((
467 (% _msthash="506064" _msttexthash="21185632" _mstvisible="2" %)
468 If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
469 )))
470
471
472
473 (% _mstvisible="1" %)
474 ==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
475
476 (% _msthash="315258" _msttexthash="41539368" _mstvisible="1" %)
477 Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
478
479 (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
480 (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 96px;" %)(% _mstvisible="5" %)
481 (((
482 (% _mstvisible="6" %)
483 (% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
484 )))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
485 (((
486 (% _mstvisible="6" %)
487 (% _msthash="1817489" _msttexthash="4550" _mstvisible="8" %)**2**
488 )))|=(% _mstvisible="4" style="width: 99px;" %)(% _mstvisible="5" %)
489 (((
490 (% _mstvisible="6" %)
491 (% _msthash="1817490" _msttexthash="4550" _mstvisible="8" %)**2**
492 )))|=(% _mstvisible="4" style="width: 132px;" %)(% _mstvisible="5" %)
493 (((
494 (% _mstvisible="6" %)
495 (% _msthash="1817491" _msttexthash="4550" _mstvisible="8" %)**2**
496 )))|=(% _mstvisible="4" style="width: 54px;" %)(% _mstvisible="5" %)
497 (((
498 (% _mstvisible="6" %)
499 (% _msthash="1817492" _msttexthash="4459" _mstvisible="8" %)**1**
500 )))|=(% _mstvisible="4" style="width: 64px;" %)(% _mstvisible="5" %)
501 (((
502 (% _mstvisible="6" %)
503 (% _msthash="1817493" _msttexthash="4732" _mstvisible="8" %)**4**
504 )))
505 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
506 (((
507 (% _mstvisible="6" %)
508 (% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**Value**
509 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
510 (((
511 (% _mstvisible="6" %)
512 [[External temperature>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
513 )))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
514 (((
515 (% _mstvisible="6" %)
516 (((
517 (% _mstvisible="7" %)
518 [[Built-In>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
519 )))
520
521 (% _mstvisible="6" %)
522 (((
523 (% _mstvisible="7" %)
524 [[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
525 )))
526 )))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
527 (((
528 (% _mstvisible="6" %)
529 (((
530 (% _msthash="2224747" _msttexthash="136331" _mstvisible="7" %)
531 BAT Status &
532 )))
533
534 (% _mstvisible="6" %)
535 (((
536 (% _mstvisible="7" %)
537 [[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
538 )))
539 )))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
540 (((
541 (% _msthash="1817496" _msttexthash="147225" _mstvisible="6" %)
542 Status & Ext
543 )))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
544 (((
545 (% _mstvisible="6" %)
546 (((
547 (% _mstvisible="7" %)
548 [[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
549 )))
550 )))
551
552 (% _mstvisible="1" %)
553 * (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**Battery status & **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**
554
555 (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:469px" %)
556 (% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)Bit(bit)|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
557 (% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)Value|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
558 (((
559 (% _msthash="1817497" _msttexthash="128427" _mstvisible="6" %)
560 BAT Status
561
562 (% _msthash="1817498" _msttexthash="472784" _mstvisible="6" %)
563 00(b): Ultra Low ( BAT <= 2.50v)
564
565 (% _msthash="1817499" _msttexthash="483678" _mstvisible="6" %)
566 01(b): Low  (2.50v <=BAT <= 2.55v)
567
568 (% _msthash="1817500" _msttexthash="440791" _mstvisible="6" %)
569 10(b): OK   (2.55v <= BAT <=2.65v)
570
571 (% _msthash="1817501" _msttexthash="334191" _mstvisible="6" %)
572 11(b): Good   (BAT >= 2.65v)
573 )))|(% _mstvisible="4" style="width:134px" %)(% _mstvisible="5" %)
574 (((
575 (% _mstvisible="6" %)
576 [[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
577
578 (% _mstvisible="6" %)
579
580 )))
581
582 (% _mstvisible="1" %)
583 * (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**Status & Ext Byte**
584
585 (% _mstvisible="1" %)
586 [[image:image-20220523152434-16.png||_mstalt="453921" _mstvisible="3"]]
587
588 (% _mstvisible="1" %)
589 * Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
590 * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
591 * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
592
593 (% _mstvisible="1" %)
594 == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
595
596 (% _msthash="315259" _msttexthash="20933341" _mstvisible="1" %)
597 Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
598
599 (% _mstvisible="1" %)
600 (((
601 (% _msthash="506065" _msttexthash="4753983" _mstvisible="2" %)
602 (% _mstvisible="3" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
603 )))
604
605 (% _mstvisible="1" %)
606 (((
607 (% _msthash="506066" _msttexthash="14696682" _mstvisible="2" %)
608 (% _mstvisible="3" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
609 )))
610
611 (% _mstvisible="1" %)
612 (((
613 (% _msthash="506067" _msttexthash="180297" _mstvisible="2" %)
614 Add Datacake:
615 )))
616
617 (% _mstvisible="1" %)
618 [[image:image-20220523000825-7.png||_mstalt="429884" _mstvisible="3" height="262" width="583"]]
619
620
621 (% _msthash="315260" _msttexthash="750178" _mstvisible="1" %)
622 Select default key as Access Key:
623
624 (% _mstvisible="1" %)
625 [[image:image-20220523000825-8.png||_mstalt="430248" _mstvisible="3" height="453" width="406"]]
626
627 (% _msthash="315261" _msttexthash="2134964" _mstvisible="1" %)
628 In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]]) , add LHT65 device.
629
630 (% _mstvisible="1" %)
631 [[image:image-20220523000825-9.png||_mstalt="430612" _mstvisible="3" height="366" width="392"]]
632
633 (% _mstvisible="1" %)
634 [[image:image-20220523000825-10.png||_mstalt="450619" _mstvisible="3" height="413" width="728"]]
635
636
637
638 (% _mstvisible="1" %)
639 == (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 Datalog Feature(%%) ==
640
641 (% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
642 Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
643
644
645 (% _mstvisible="1" %)
646 === (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 Ways to get datalog via LoRaWAN(%%) ===
647
648 (% _msthash="315263" _msttexthash="409604" _mstvisible="1" %)
649 There are two methods:
650
651 (% _mstvisible="1" %)
652 1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
653 1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
654
655 (% _mstvisible="1" %)
656 === (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
657
658 (% _msthash="315264" _msttexthash="1182285" _mstvisible="1" %)
659 LHT65N uses Unix TimeStamp format based on
660
661 (% _mstvisible="1" %)
662 [[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
663
664
665 (% _mstvisible="1" %)
666 (((
667 (% _msthash="506068" _msttexthash="2717234" _mstvisible="2" %)
668 User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
669 )))
670
671 (% _mstvisible="1" %)
672 (((
673 (% _msthash="506069" _msttexthash="709813" _mstvisible="2" %)
674 Below is the converter example
675 )))
676
677 (% _mstvisible="1" %)
678 [[image:image-20220523001219-12.png||_mstalt="450827" _mstvisible="3" height="298" width="720"]]
679
680 (% _msthash="315265" _msttexthash="15137317" _mstvisible="1" %)
681 So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
682
683
684 (% _mstvisible="1" %)
685 === (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 Set Device Time(%%) ===
686
687 (% _mstvisible="1" %)
688 (((
689 (% _msthash="506070" _msttexthash="4521946" _mstvisible="2" %)
690 There are two ways to set device’s time:
691 )))
692
693 (% _mstvisible="1" %)
694 (((
695 (% _mstvisible="2" %)
696 (% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. Through LoRaWAN MAC Command (Default settings)**
697 )))
698
699 (% _mstvisible="1" %)
700 (((
701 (% _msthash="506072" _msttexthash="2126267" _mstvisible="2" %)
702 User need to set SYNCMOD=1 to enable sync time via MAC command.
703 )))
704
705 (% _mstvisible="1" %)
706 (((
707 (% _msthash="506073" _msttexthash="54430324" _mstvisible="2" %)
708 Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
709 )))
710
711 (% _mstvisible="1" %)
712 (((
713 (% _msthash="506074" _msttexthash="92531127" _mstvisible="2" %)
714 Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
715 )))
716
717 (% _mstvisible="1" %)
718 (((
719 (% _mstvisible="2" %)
720
721 )))
722
723 (% _mstvisible="1" %)
724 (((
725 (% _mstvisible="2" %)
726 (% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2. Manually Set Time**
727 )))
728
729 (% _mstvisible="1" %)
730 (((
731 (% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
732 User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
733
734 (% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
735
736 )))
737
738 (% _mstvisible="1" %)
739 === (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 Poll sensor value(%%) ===
740
741 (% _msthash="315266" _msttexthash="4955821" _mstvisible="1" %)
742 User can poll sensor value based on timestamps from the server. Below is the downlink command.
743
744 (% _mstvisible="1" %)
745 [[image:image-20220523152302-15.png||_mstalt="451581" _mstvisible="3"]]
746
747 (% _mstvisible="1" %)
748 (((
749 (% _msthash="506077" _msttexthash="14670916" _mstvisible="2" %)
750 Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
751 )))
752
753 (% _mstvisible="1" %)
754 (((
755 (% _mstvisible="2" %)
756 For example, downlink command (% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
757 )))
758
759 (% _mstvisible="1" %)
760 (((
761 (% _msthash="506078" _msttexthash="6907459" _mstvisible="2" %)
762 Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
763 )))
764
765 (% _mstvisible="1" %)
766 (((
767 (% _msthash="506079" _msttexthash="23531573" _mstvisible="2" %)
768 Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
769 )))
770
771
772 (% _mstvisible="1" %)
773 === (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 Datalog Uplink payload(%%) ===
774
775 (% _msthash="315267" _msttexthash="2245087" _mstvisible="1" %)
776 The Datalog poll reply uplink will use below payload format.
777
778 (% _mstvisible="1" %)
779 (((
780 (% _mstvisible="2" %)
781 (% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**Retrieval data payload**
782 )))
783
784 (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
785 (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 93px;" %)(% _mstvisible="5" %)
786 (((
787 (% _mstvisible="6" %)
788 (((
789 (% _mstvisible="7" %)
790 (% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**Size(bytes)**
791 )))
792 )))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
793 (((
794 (% _mstvisible="6" %)
795 (((
796 (% _mstvisible="7" %)
797 (% _msthash="2224751" _msttexthash="4550" _mstvisible="9" %)**2**
798 )))
799 )))|=(% _mstvisible="4" style="width: 102px;" %)(% _mstvisible="5" %)
800 (((
801 (% _mstvisible="6" %)
802 (((
803 (% _mstvisible="7" %)
804 (% _msthash="2224752" _msttexthash="4550" _mstvisible="9" %)**2**
805 )))
806 )))|=(% _mstvisible="4" style="width: 86px;" %)(% _mstvisible="5" %)
807 (((
808 (% _mstvisible="6" %)
809 (((
810 (% _mstvisible="7" %)
811 (% _msthash="2224753" _msttexthash="4550" _mstvisible="9" %)**2**
812 )))
813 )))|=(% _mstvisible="4" style="width: 86px;" %)(% _mstvisible="5" %)
814 (((
815 (% _mstvisible="6" %)
816 (((
817 (% _mstvisible="7" %)
818 (% _msthash="2224754" _msttexthash="4459" _mstvisible="9" %)**1**
819 )))
820 )))|=(% _mstvisible="4" style="width: 48px;" %)(% _mstvisible="5" %)
821 (((
822 (% _mstvisible="6" %)
823 (((
824 (% _mstvisible="7" %)
825 (% _msthash="2224755" _msttexthash="4732" _mstvisible="9" %)**4**
826 )))
827 )))
828 (% _mstvisible="3" %)|(% _mstvisible="4" style="width:93px" %)(% _mstvisible="5" %)
829 (((
830 (% _mstvisible="6" %)
831 (((
832 (% _mstvisible="7" %)
833 (% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**Value**
834 )))
835 )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
836 (((
837 (% _mstvisible="6" %)
838 (((
839 (% _mstvisible="7" %)
840 [[External sensor data>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
841 )))
842 )))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
843 (((
844 (% _mstvisible="6" %)
845 (((
846 (% _mstvisible="7" %)
847 (((
848 (% _mstvisible="8" %)
849 [[Built In>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
850 )))
851 )))
852
853 (% _mstvisible="6" %)
854 (((
855 (% _mstvisible="7" %)
856 (((
857 (% _mstvisible="8" %)
858 [[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
859 )))
860 )))
861 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
862 (((
863 (% _mstvisible="6" %)
864 (((
865 (% _mstvisible="7" %)
866 (((
867 (% _mstvisible="8" %)
868 [[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
869 )))
870 )))
871
872 (% _mstvisible="6" %)
873 (((
874 (% _mstvisible="7" %)
875 (((
876 (% _mstvisible="8" %)
877 [[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
878 )))
879 )))
880 )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
881 (((
882 (% _mstvisible="6" %)
883 (((
884 (% _msthash="2224758" _msttexthash="390390" _mstvisible="7" %)
885 Poll message flag & Ext
886 )))
887 )))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
888 (((
889 (% _mstvisible="6" %)
890 (((
891 (% _mstvisible="7" %)
892 (((
893 (% _mstvisible="8" %)
894 [[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
895 )))
896 )))
897
898 (% _mstvisible="6" %)
899 (((
900 (% _mstvisible="7" %)
901 (((
902 (% _mstvisible="8" %)
903
904 )))
905 )))
906 )))
907
908 (% _mstvisible="1" %)
909 (% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**Poll message flag & Ext**
910
911 (% _mstvisible="1" %)
912 [[image:image-20220523152208-14.png||_mstalt="452920" _mstvisible="3"]]
913
914 (% _mstvisible="1" %)
915 (((
916 (% _mstvisible="2" %)
917 (((
918 (% _msthash="736723" _msttexthash="2005003" _mstvisible="3" %)
919 Poll Message Flag: 1: This message is a poll message reply.
920 )))
921 )))
922
923 (% _mstvisible="1" %)
924 * (% _mstvisible="3" %)
925 (((
926 (% _mstvisible="4" %)
927 (((
928 (% _msthash="1197157" _msttexthash="561548" _mstvisible="5" %)
929 Poll Message Flag is set to 1.
930 )))
931 )))
932 * (% _mstvisible="3" %)
933 (((
934 (% _mstvisible="4" %)
935 (((
936 (% _msthash="1197158" _msttexthash="9284964" _mstvisible="5" %)
937 Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
938 )))
939 )))
940
941 (% _mstvisible="1" %)
942 (((
943 (% _mstvisible="2" %)
944 (((
945 (% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
946
947
948 (% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
949 For example, in US915 band, the max payload for different DR is:
950 )))
951 )))
952
953 (% _mstvisible="1" %)
954 (((
955 (% _mstvisible="2" %)
956 (((
957 (% _msthash="736725" _msttexthash="1065532" _mstvisible="3" %)
958 a) DR0: max is 11 bytes so one entry of data
959 )))
960 )))
961
962 (% _mstvisible="1" %)
963 (((
964 (% _mstvisible="2" %)
965 (((
966 (% _msthash="736726" _msttexthash="3265665" _mstvisible="3" %)
967 b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
968 )))
969 )))
970
971 (% _mstvisible="1" %)
972 (((
973 (% _mstvisible="2" %)
974 (((
975 (% _msthash="736727" _msttexthash="1454115" _mstvisible="3" style="text-align: left;" %)
976 c) DR2: total payload includes 11 entries of data
977 )))
978 )))
979
980 (% _mstvisible="1" %)
981 (((
982 (% _mstvisible="2" %)
983 (((
984 (% _msthash="736728" _msttexthash="1483924" _mstvisible="3" style="text-align: left;" %)
985 d) DR3: total payload includes 22 entries of data.
986 )))
987 )))
988
989 (% _mstvisible="1" %)
990 (((
991 (% _mstvisible="2" %)
992 (((
993 (% _msthash="736729" _msttexthash="5848349" _mstvisible="3" style="text-align: left;" %)
994 If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0   
995 )))
996 )))
997
998
999 (% _mstvisible="1" style="text-align: left;" %)
1000 (% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**Example:**
1001
1002 (% _msthash="315270" _msttexthash="913822" _mstvisible="1" style="text-align: left;" %)
1003 If LHT65N has below data inside Flash:
1004
1005 (% _mstvisible="1" %)
1006 [[image:image-20220523144455-1.png||_mstalt="430040" _mstvisible="3" height="335" width="735"]]
1007
1008 (% _mstvisible="1" %)
1009 (((
1010 (% _msthash="506081" _msttexthash="1663961" _mstvisible="2" style="text-align: left;" %)
1011 If user sends below downlink command: (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
1012 )))
1013
1014 (% _mstvisible="1" %)
1015 (((
1016 (% _msthash="506082" _msttexthash="1092494" _mstvisible="2" style="text-align: left;" %)
1017 Where : Start time: 60065F97 = time 21/1/19 04:27:03
1018 )))
1019
1020 (% _mstvisible="1" %)
1021 (((
1022 (% _msthash="506083" _msttexthash="737269" _mstvisible="2" style="text-align: left;" %)
1023 Stop time 60066DA7= time 21/1/19 05:27:(% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)03
1024 )))
1025
1026 (% _mstvisible="1" %)
1027 (((
1028 (% _mstvisible="2" %)
1029
1030 )))
1031
1032 (% _mstvisible="1" %)
1033 (((
1034 (% _msthash="506084" _msttexthash="751218" _mstvisible="2" style="text-align: left;" %)
1035 LHT65N will uplink this payload.
1036 )))
1037
1038 (% _mstvisible="1" %)
1039 [[image:image-20220523001219-13.png||_mstalt="451204" _mstvisible="3" height="421" style="text-align:left" width="727"]]
1040
1041 (% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
1042 7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1043
1044 Where the first 11 bytes is for the first entry:
1045
1046 7FFF089801464160065F97
1047
1048 Ext sensor data=0x7FFF/100=327.67
1049
1050 Temp=0x0898/100=22.00
1051
1052 Hum=0x0146/10=32.6
1053
1054 poll message flag & Ext=0x41,means reply data,Ext=1
1055
1056 Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1057
1058
1059 (% _mstvisible="1" style="text-align: left;" %)
1060 == (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 Alarm Mode(%%) ==
1061
1062 (% _msthash="315279" _msttexthash="16493308" _mstvisible="1" style="text-align: left;" %)
1063 when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
1064
1065 (% _mstvisible="1" %)
1066 (((
1067 (% _mstvisible="2" style="text-align: left;" %)
1068 (% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.
1069 )))
1070
1071 (% _mstvisible="1" style="text-align: left;" %)
1072 (% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**AT COMMAND FOR ALARM MODE:**
1073
1074 (% _mstvisible="1" class="box infomessage" %)
1075 (((
1076 (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1077 (% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1078
1079 (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1080 (% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1081
1082 (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1083 (% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1084
1085 (% _mstvisible="2" style="text-align: left;" %)
1086 (% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1087
1088 (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1089 (% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1090 )))
1091
1092
1093
1094 (% _msthash="72514" _msttexthash="253149" _mstvisible="1" style="text-align: left;" %)
1095 == (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%)LED Indicator ==
1096
1097 (% _mstvisible="1" %)
1098 (((
1099 (% _msthash="197769" _msttexthash="2924142" style="text-align: left;" %)
1100 The LHT65 has a triple color LED which for easy showing different stage .
1101
1102 (% _msthash="289211" _msttexthash="3402659" style="text-align: left;" %)
1103 While user press ACT button, the LED will work as per LED status with ACT button.
1104 )))
1105
1106 (% _mstvisible="1" %)
1107 (((
1108 (% _msthash="506092" _msttexthash="521573" _mstvisible="2" style="text-align: left;" %)
1109 In a normal working state:
1110 )))
1111
1112 (% _mstvisible="1" %)
1113 * (% _mstvisible="3" %)
1114 (((
1115 (% _msthash="903005" _msttexthash="1647204" _mstvisible="4" %)
1116 For each uplink, the BLUE LED or RED LED will blink (% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)once(%%).(% style="display:none" %)
1117
1118 (% _msthash="197771" _msttexthash="1202526" %)
1119 (% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)BLUE LED when external sensor is connected
1120 )))
1121 * (% _mstvisible="3" %)
1122 (((
1123 (% _msthash="903007" _msttexthash="1334749" _mstvisible="4" %)
1124 RED LED when external sensor is not connected
1125 )))
1126 * (% _mstvisible="3" %)
1127 (((
1128 (% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1129 For each success downlink, the PURPLE LED will blink once
1130 )))
1131
1132
1133 (% _mstvisible="1" style="text-align: left;" %)
1134 == (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 installation(%%) ==
1135
1136 (% _mstvisible="1" %)
1137 [[image:image-20220516231650-1.png||_mstalt="428597" _mstvisible="3" height="436" width="428"]]
1138
1139
1140 (% _msthash="604150" _msttexthash="563212" _mstvisible="1" style="text-align: left;" %)
1141 = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1142
1143 (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1144 == (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
1145
1146 (% _mstvisible="1" %)
1147 [[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
1148
1149
1150 (% _msthash="315354" _msttexthash="1270971" _mstvisible="1" style="text-align: left;" %)
1151 Temperature sensor with 2 meters cable long
1152
1153 (% _mstvisible="1" %)
1154 * Resolution: 0.0625 °C
1155 * ±0.5°C accuracy from -10°C to +85°C
1156 * ±2°C accuracy from -55°C to +125°C
1157 * Operating Range: -40 ~~ 125 °C
1158 * -55°C to 125°C
1159 * Working voltage 2.35v ~~ 5v
1160
1161
1162
1163 (% _mstvisible="1" style="text-align: left;" %)
1164 = (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1165
1166 (% _mstvisible="1" %)
1167 (((
1168 (% _msthash="506246" _msttexthash="2005926" _mstvisible="2" style="text-align: left;" %)
1169 Use can configure LHT65N via AT Command or LoRaWAN Downlink.
1170 )))
1171
1172 (% _mstvisible="1" %)
1173 * (% _mstvisible="3" %)
1174 (((
1175 (% _msthash="903318" _msttexthash="635544" _mstvisible="4" %)
1176 AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
1177 )))
1178 * (% _mstvisible="3" %)
1179 (((
1180 (% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
1181 LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
1182 )))
1183
1184 (% _mstvisible="1" %)
1185 (((
1186 (% _mstvisible="2" style="text-align: left;" %)
1187
1188 )))
1189
1190 (% _mstvisible="1" %)
1191 (((
1192 (% _msthash="506248" _msttexthash="2144051" _mstvisible="2" style="text-align: left;" %)
1193 There are two kinds of commands to configure LHT65N, they are:
1194 )))
1195
1196 (% _mstvisible="1" %)
1197 (((
1198 (% _mstvisible="2" style="text-align: left;" %)
1199 (% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1200 )))
1201
1202 (% _mstvisible="1" %)
1203 (((
1204 (% _msthash="506250" _msttexthash="774527" _mstvisible="2" style="text-align: left;" %)
1205 These commands are to configure:
1206 )))
1207
1208 (% _mstvisible="1" %)
1209 * (% _mstvisible="3" %)
1210 (((
1211 (% _msthash="903320" _msttexthash="1503580" _mstvisible="4" %)
1212 General system settings like: uplink interval.
1213 )))
1214 * (% _mstvisible="3" %)
1215 (((
1216 (% _msthash="903321" _msttexthash="1244334" _mstvisible="4" %)
1217 LoRaWAN protocol & radio-related commands.
1218 )))
1219
1220 (% _mstvisible="1" %)
1221 (((
1222 (% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
1223 They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1224 )))
1225
1226 (% _mstvisible="1" %)
1227 (((
1228 (% _mstvisible="2" style="text-align: left;" %)
1229
1230 )))
1231
1232 (% _mstvisible="1" %)
1233 (((
1234 (% _mstvisible="2" style="text-align: left;" %)
1235 (% _mstvisible="3" style="color:#4f81bd" %)* **Commands special design for LHT65N**
1236 )))
1237
1238 (% _mstvisible="1" %)
1239 (((
1240 (% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1241 These commands are only valid for LHT65N, as below:
1242
1243 (% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1244
1245 )))
1246
1247 (% _mstvisible="1" style="text-align: left;" %)
1248 == (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 Set Transmit Interval Time(%%) ==
1249
1250 (% _msthash="315355" _msttexthash="1659268" _mstvisible="1" style="text-align: left;" %)
1251 Feature: Change LoRaWAN End Node Transmit Interval.
1252
1253 (% _mstvisible="1" style="text-align: left;" %)
1254 (% style="color:#4f81bd" %)**AT Command: AT+TDC**
1255
1256 (% _mstvisible="1" %)
1257 [[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
1258
1259 (% _mstvisible="1" %)
1260 (((
1261 (% _mstvisible="2" style="text-align: left;" %)
1262
1263
1264 (% _mstvisible="2" style="text-align: left;" %)
1265 (% style="color:#4f81bd" %)**Downlink Command: 0x01**
1266 )))
1267
1268 (% _mstvisible="1" %)
1269 (((
1270 (% _msthash="506256" _msttexthash="1996592" _mstvisible="2" style="text-align: left;" %)
1271 Format: Command Code (0x01) followed by 3 bytes time value.
1272 )))
1273
1274 (% _mstvisible="1" %)
1275 (((
1276 (% _msthash="506257" _msttexthash="12934649" _mstvisible="2" style="text-align: left;" %)
1277 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1278 )))
1279
1280 (% _mstvisible="1" %)
1281 * (% _mstvisible="3" %)
1282 (((
1283 (% _msthash="903322" _msttexthash="3250546" _mstvisible="4" %)
1284 (% _mstvisible="5" %)**Example 1**(%%): Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1285 )))
1286 * (% _mstvisible="3" %)
1287 (((
1288 (% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1289 (% _mstvisible="5" %)**Example 2**(%%): Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1290
1291
1292 (% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1293
1294 )))
1295
1296 (% _mstvisible="1" style="text-align: left;" %)
1297 == (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 Set External Sensor Mode(%%) ==
1298
1299 (% _msthash="315357" _msttexthash="975117" _mstvisible="1" style="text-align: left;" %)
1300 Feature: Change External Sensor Mode.
1301
1302 (% _mstvisible="1" style="text-align: left;" %)
1303 (% style="color:#4f81bd" %)**AT Command: AT+EXT**
1304
1305 (% _mstvisible="1" %)
1306 [[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
1307
1308 (% _mstvisible="1" %)
1309 (((
1310 (% _mstvisible="2" style="text-align: left;" %)
1311
1312
1313 (% _mstvisible="2" style="text-align: left;" %)
1314 (% style="color:#4f81bd" %)**Downlink Command: 0xA2**
1315 )))
1316
1317 (% _mstvisible="1" %)
1318 (((
1319 (% _msthash="506259" _msttexthash="395629" _mstvisible="2" style="text-align: left;" %)
1320 Total bytes: 2 ~~ 5 bytes
1321 )))
1322
1323 (% _mstvisible="1" %)
1324 (((
1325 (% _mstvisible="2" %)
1326 (% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**Example:**
1327 )))
1328
1329 (% _mstvisible="1" %)
1330 * (% _mstvisible="3" %)
1331 (((
1332 (% _msthash="903324" _msttexthash="934973" _mstvisible="4" %)
1333 0xA201: Set external sensor type to E1
1334 )))
1335 * (% _mstvisible="3" %)
1336 (((
1337 (% _msthash="903325" _msttexthash="354770" _mstvisible="4" %)
1338 0xA209: Same as AT+EXT=9
1339 )))
1340 * (% _mstvisible="3" %)
1341 (((
1342 (% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1343 0xA20702003c,Same as AT+SETCNT=60
1344
1345
1346 (% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1347
1348 )))
1349
1350 (% _mstvisible="1" style="text-align: left;" %)
1351 == (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 Enable/Disable uplink Temperature probe ID(%%) ==
1352
1353 (% _msthash="315359" _msttexthash="2977572" _mstvisible="1" style="text-align: left;" %)
1354 Feature: If PID is enabled, device will send the temperature probe ID on:
1355
1356 (% _mstvisible="1" %)
1357 * First Packet after OTAA Join
1358 * Every 24 hours since the first packet.
1359
1360 (% _msthash="315360" _msttexthash="658814" _mstvisible="1" style="text-align: left;" %)
1361 PID is default set to disable (0)
1362
1363 (% _mstvisible="1" style="text-align: left;" %)
1364 (% style="color:#4f81bd" %)**AT Command:**
1365
1366 (% _mstvisible="1" %)
1367 [[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
1368
1369
1370 (% _mstvisible="1" style="text-align: left;" %)
1371 (% style="color:#4f81bd" %)**Downlink Command:**
1372
1373 (% _mstvisible="1" %)
1374 * 0xA800  **~-~->** AT+PID=0
1375 * 0xA801     **~-~->** AT+PID=1
1376
1377
1378
1379 (% _mstvisible="1" style="text-align: left;" %)
1380 == (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1381
1382 (% _msthash="315363" _msttexthash="1170728" _mstvisible="1" style="text-align: left;" %)
1383 Feature: Set device password, max 9 digits
1384
1385 (% _mstvisible="1" style="text-align: left;" %)
1386 (% style="color:#4f81bd" %)**AT Command: AT+PWORD**
1387
1388 (% _mstvisible="1" %)
1389 [[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
1390
1391 (% _mstvisible="1" %)
1392 (((
1393 (% _mstvisible="2" style="text-align: left;" %)
1394
1395
1396 (% _mstvisible="2" style="text-align: left;" %)
1397 (% style="color:#4f81bd" %)**Downlink Command:**
1398 )))
1399
1400 (% _mstvisible="1" %)
1401 (((
1402 (% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1403 No downlink command for this feature.
1404
1405 (% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1406
1407 )))
1408
1409 (% _mstvisible="1" style="text-align: left;" %)
1410 == (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 Quit AT Command(%%) ==
1411
1412 (% _msthash="315365" _msttexthash="4616456" _mstvisible="1" style="text-align: left;" %)
1413 Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1414
1415 (% _mstvisible="1" style="text-align: left;" %)
1416 (% style="color:#4f81bd" %)**AT Command: AT+DISAT**
1417
1418 (% _mstvisible="1" %)
1419 [[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
1420
1421
1422 (% _mstvisible="1" style="text-align: left;" %)
1423 (% style="color:#4f81bd" %)**Downlink Command:**
1424
1425 (% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1426 No downlink command for this feature.
1427
1428
1429 (% _mstvisible="1" style="text-align: left;" %)
1430 == (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 Set to sleep mode(%%) ==
1431
1432 (% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
1433 Feature: Set device to sleep mode
1434
1435 (% _mstvisible="1" style="text-align: left;" %)
1436 (% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1437
1438 (% _mstvisible="1" %)
1439 [[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1440
1441
1442 (% _mstvisible="1" %)
1443 (% style="color:#4f81bd" %)**Downlink Command:**
1444
1445 (% _mstvisible="1" %)
1446 * There is no downlink command to set to Sleep mode.
1447
1448
1449
1450 (% _mstvisible="1" %)
1451 == (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1452
1453 (% _msthash="315372" _msttexthash="2565524" _mstvisible="1" %)
1454 Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
1455
1456 (% _mstvisible="1" %)
1457 (% style="color:#4f81bd" %)**AT Command:**
1458
1459 (% _mstvisible="1" %)
1460 [[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
1461
1462
1463 (% _mstvisible="1" %)
1464 (% style="color:#4f81bd" %)**Downlink Command:**
1465
1466 (% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1467 0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
1468
1469
1470 (% _mstvisible="1" %)
1471 == (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 Set Time Sync Mode(%%) ==
1472
1473 (% _mstvisible="1" %)
1474 (((
1475 (% _msthash="506263" _msttexthash="11748321" _mstvisible="2" %)
1476 Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
1477 )))
1478
1479 (% _mstvisible="1" %)
1480 (((
1481 (% _msthash="506264" _msttexthash="6530264" _mstvisible="2" %)
1482 SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
1483 )))
1484
1485 (% _mstvisible="1" %)
1486 (((
1487 (% _mstvisible="2" %)
1488 (% style="color:#4f81bd" %)**AT Command:**
1489 )))
1490
1491 (% _mstvisible="1" %)
1492 [[image:image-20220523151336-9.png||_mstalt="431717" _mstvisible="3"]]
1493
1494
1495 (% _mstvisible="1" %)
1496 (% style="color:#4f81bd" %)**Downlink Command:**
1497
1498 (% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1499 0x28 01 ~/~/ Same As AT+SYNCMOD=1
1500
1501 (% _msthash="315378" _msttexthash="479076" _mstvisible="1" %)
1502 0x28 00 ~/~/ Same As AT+SYNCMOD=0
1503
1504
1505 (% _mstvisible="1" %)
1506 == (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 Set Time Sync Interval(%%) ==
1507
1508 (% _msthash="315379" _msttexthash="3065777" _mstvisible="1" %)
1509 Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1510
1511 (% _mstvisible="1" %)
1512 (% style="color:#4f81bd" %)**AT Command:**
1513
1514 (% _mstvisible="1" %)
1515 [[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
1516
1517
1518 (% _mstvisible="1" %)
1519 (% style="color:#4f81bd" %)**Downlink Command:**
1520
1521 (% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1522 0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
1523
1524
1525 (% _mstvisible="1" %)
1526 == (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 Print data entries base on page.(%%) ==
1527
1528 (% _msthash="315383" _msttexthash="3233334" _mstvisible="1" %)
1529 Feature: Print the sector data from start page to stop page (max is 416 pages).
1530
1531 (% _mstvisible="1" %)
1532 (% style="color:#4f81bd" %)**AT Command: AT+PDTA**
1533
1534 (% _mstvisible="1" %)
1535 [[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
1536
1537
1538 (% _mstvisible="1" %)
1539 (% style="color:#4f81bd" %)**Downlink Command:**
1540
1541 (% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1542 No downlink commands for feature
1543
1544
1545 (% _mstvisible="1" %)
1546 == (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 Print last few data entries.(%%) ==
1547
1548 (% _msthash="315387" _msttexthash="1101009" _mstvisible="1" %)
1549 Feature: Print the last few data entries
1550
1551 (% _mstvisible="1" %)
1552 (% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1553
1554 (% _mstvisible="1" %)
1555 [[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
1556
1557
1558 (% _mstvisible="1" %)
1559 (% style="color:#4f81bd" %)**Downlink Command:**
1560
1561 (% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1562 No downlink commands for feature
1563
1564
1565 (% _mstvisible="1" %)
1566 == (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 Clear Flash Record(%%) ==
1567
1568 (% _msthash="315391" _msttexthash="1609075" _mstvisible="1" %)
1569 Feature: Clear flash storage for data log feature.
1570
1571 (% _mstvisible="1" %)
1572 (% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1573
1574 (% _mstvisible="1" %)
1575 [[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
1576
1577
1578 (% _mstvisible="1" %)
1579 (% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1580
1581 (% _mstvisible="1" %)
1582 * Example: 0xA301 ~/~/Same as AT+CLRDTA
1583
1584
1585
1586 (% _mstvisible="1" %)
1587 == (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1588
1589 (% _msthash="315394" _msttexthash="51837149" _mstvisible="1" %)
1590 Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
1591
1592
1593 (% _mstvisible="1" %)
1594 (% style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1595
1596 (% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1597 The default factory setting is 0
1598
1599 (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1600 (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**Command Example**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**Function**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**Response**
1601 (% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1602
1603 (% _mstvisible="1" %)
1604 (% style="color:#4f81bd" %)**Downlink Command: 0x34**
1605
1606 (% _mstvisible="1" %)
1607 * Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1608
1609
1610
1611 (% _mstvisible="1" %)
1612 = (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1613
1614 (% _mstvisible="1" %)
1615 == (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 Battery Type(%%) ==
1616
1617 (% _msthash="315398" _msttexthash="33754799" _mstvisible="1" %)
1618 LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1619
1620 (% _mstvisible="1" %)
1621 (((
1622 (% _mstvisible="2" %)
1623 The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1624 [[image:image-20220515075034-1.png||_mstalt="428961" _mstvisible="4" height="208" width="644"]]
1625 )))
1626
1627 (% _mstvisible="1" %)
1628 (((
1629 (% _mstvisible="2" %)
1630 The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1631
1632 )))
1633
1634 (% _mstvisible="1" %)
1635 == (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 Replace Battery(%%) ==
1636
1637 (% _msthash="315399" _msttexthash="11289278" _mstvisible="1" %)
1638 LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
1639
1640 (% _mstvisible="1" %)
1641 [[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1642
1643 (% _mstvisible="1" %)
1644 == (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1645
1646 (% _mstvisible="1" %)
1647 (((
1648 (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1649 (((
1650 Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1651 [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1652 )))
1653
1654 (((
1655
1656 )))
1657
1658 (((
1659 A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1660 )))
1661
1662
1663 (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1664 = (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. FAQ(%%) =
1665
1666 (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1667 == 6.1 How to use AT Command? ==
1668
1669 (((
1670 LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1671 )))
1672
1673 [[image:image-20220530085651-1.png]]
1674
1675
1676 **Connection:**
1677
1678 ✓** USB to TTL GND <~-~->GND**
1679
1680 **✓ USB to TTL RXD <~-~-> D+**
1681
1682 **✓ USB to TTL TXD <~-~-> A11**
1683
1684 **✓ USB to TTL 3.3V <~-~-> D-**
1685
1686
1687 (((
1688 In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1689 )))
1690
1691 (((
1692 Input password and ATZ to activate LHT65N,As shown below:
1693 )))
1694
1695 [[image:image-20220530095701-4.png]]
1696
1697
1698 AT Command List is as below:
1699
1700 AT+<CMD>? : Help on <CMD>
1701
1702 AT+<CMD> : Run <CMD>
1703
1704 AT+<CMD>=<value> : Set the value
1705
1706 AT+<CMD>=? : Get the value
1707
1708 AT+DEBUG:Set more info output
1709
1710 ATZ: Trig a reset of the MCU
1711
1712 AT+FDR: Reset Parameters to Factory Default, Keys Reserve
1713
1714 AT+DEUI: Get or Set the Device EUI
1715
1716 AT+DADDR: Get or Set the Device Address
1717
1718 AT+APPKEY: Get or Set the Application Key
1719
1720 AT+NWKSKEY: Get or Set the Network Session Key
1721
1722 AT+APPSKEY: Get or Set the Application Session Key
1723
1724 AT+APPEUI: Get or Set the Application EUI
1725
1726 AT+ADR: Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1727
1728 AT+TXP: Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1729
1730 AT+DR: Get or Set the Data Rate. (0-7 corresponding to DR_X)
1731
1732 AT+DCS: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1733
1734 AT+PNM: Get or Set the public network mode. (0: off, 1: on)
1735
1736 AT+RX2FQ: Get or Set the Rx2 window frequency
1737
1738 AT+RX2DR: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1739
1740 AT+RX1DL: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1741
1742 AT+RX2DL: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1743
1744 AT+JN1DL: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1745
1746 AT+JN2DL: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1747
1748 AT+NJM: Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1749
1750 AT+NWKID: Get or Set the Network ID
1751
1752 AT+FCU: Get or Set the Frame Counter Uplink
1753
1754 AT+FCD: Get or Set the Frame Counter Downlink
1755
1756 AT+CLASS: Get or Set the Device Class
1757
1758 AT+JOIN: Join network
1759
1760 AT+NJS: Get the join status
1761
1762 AT+SENDB: Send hexadecimal data along with the application port
1763
1764 AT+SEND: Send text data along with the application port
1765
1766 AT+RECVB: Print last received data in binary format (with hexadecimal values)
1767
1768 AT+RECV: Print last received data in raw format
1769
1770 AT+VER: Get current image version and Frequency Band
1771
1772 AT+CFM: Get or Set the confirmation mode (0-1)
1773
1774 AT+CFS: Get confirmation status of the last AT+SEND (0-1)
1775
1776 AT+SNR: Get the SNR of the last received packet
1777
1778 AT+RSSI: Get the RSSI of the last received packet
1779
1780 AT+TDC: Get or set the application data transmission interval in ms
1781
1782 AT+PORT: Get or set the application port
1783
1784 AT+DISAT: Disable AT commands
1785
1786 AT+PWORD: Set password, max 9 digits
1787
1788 AT+CHS: Get or Set Frequency (Unit: Hz) for Single Channel Mode
1789
1790 AT+CHE: Get or Set eight channels mode,Only for US915,AU915,CN470
1791
1792 AT+PDTA: Print the sector data from start page to stop page
1793
1794 AT+PLDTA: Print the last few sets of data
1795
1796 AT+CLRDTA: Clear the storage, record position back to 1st
1797
1798 AT+SLEEP: Set sleep mode
1799
1800 AT+EXT: Get or Set external sensor model
1801
1802 AT+BAT: Get the current battery voltage in mV
1803
1804 AT+CFG: Print all configurations
1805
1806 AT+WMOD: Get or Set Work Mode
1807
1808 AT+ARTEMP: Get or set the internal Temperature sensor alarm range
1809
1810 AT+CITEMP: Get or set the internal Temperature sensor collection interval in min
1811
1812 AT+SETCNT:Set the count at present
1813
1814 AT+RJTDC: Get or set the ReJoin data transmission interval in min
1815
1816 AT+RPL: Get or set response level
1817
1818 AT+TIMESTAMP: Get or Set UNIX timestamp in second
1819
1820 AT+LEAPSEC: Get or Set Leap Second
1821
1822 AT+SYNCMOD: Get or Set time synchronization method
1823
1824 AT+SYNCTDC: Get or set time synchronization interval in day
1825
1826 AT+PID: Get or set the PID
1827
1828
1829 )))
1830
1831 (% _mstvisible="1" %)
1832 = (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)7. Order Info(%%) =
1833
1834 (% _mstvisible="1" %)
1835 (((
1836 (% _msthash="506267" _msttexthash="432432" _mstvisible="2" %)
1837 Part Number: (% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
1838 )))
1839
1840 (% _mstvisible="1" %)
1841 (((
1842 (% _msthash="506268" _msttexthash="686946" _mstvisible="2" %)
1843 (% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%): The default frequency band
1844 )))
1845
1846 (% _mstvisible="1" %)
1847 * (% _mstvisible="3" %)
1848 (((
1849 (% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
1850 (% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1851 )))
1852 * (% _mstvisible="3" %)
1853 (((
1854 (% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
1855 (% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1856 )))
1857 * (% _mstvisible="3" %)
1858 (((
1859 (% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
1860 (% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1861 )))
1862 * (% _mstvisible="3" %)
1863 (((
1864 (% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
1865 (% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1866 )))
1867 * (% _mstvisible="3" %)
1868 (((
1869 (% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
1870 (% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1871 )))
1872 * (% _mstvisible="3" %)
1873 (((
1874 (% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
1875 (% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1876 )))
1877 * (% _mstvisible="3" %)
1878 (((
1879 (% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
1880 (% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1881 )))
1882 * (% _mstvisible="3" %)
1883 (((
1884 (% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
1885 (% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1886 )))
1887
1888 (% _mstvisible="1" %)
1889 (((
1890 (% _msthash="506269" _msttexthash="443495" _mstvisible="2" %)
1891 (% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1892 )))
1893
1894 (% _mstvisible="1" %)
1895 * (% _mstvisible="3" %)
1896 (((
1897 (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
1898 (% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1899
1900
1901 (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
1902
1903 )))
1904
1905 (% _mstvisible="1" %)
1906 = (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)8. Packing Info(%%) =
1907
1908 (% _mstvisible="1" %)
1909 (((
1910 (% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
1911
1912
1913 (% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
1914 (% _mstvisible="3" %)**Package Includes**(%%):
1915 )))
1916
1917 (% _mstvisible="1" %)
1918 * (% _mstvisible="3" %)
1919 (((
1920 (% _msthash="903336" _msttexthash="1033149" _mstvisible="4" %)
1921 LHT65N Temperature & Humidity Sensor x 1
1922 )))
1923 * (% _mstvisible="3" %)
1924 (((
1925 (% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
1926 Program cable x 1
1927 )))
1928 * (% _mstvisible="3" %)
1929 (((
1930 (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
1931 Optional external sensor
1932 )))
1933
1934 (% _mstvisible="1" %)
1935 (((
1936 (% _msthash="506271" _msttexthash="403858" _mstvisible="2" %)
1937 (% _mstvisible="3" %)**Dimension and weight**(%%):
1938 )))
1939
1940 (% _mstvisible="1" %)
1941 * (% _mstvisible="3" %)
1942 (((
1943 (% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
1944 Device Size:  13.5 x 7 x 3 cm
1945 )))
1946 * (% _mstvisible="3" %)
1947 (((
1948 (% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
1949 Device Weight: 105g
1950 )))
1951 * (% _mstvisible="3" %)
1952 (((
1953 (% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
1954 Package Size / pcs : 14.5 x 8 x 5 cm
1955 )))
1956 * (% _mstvisible="3" %)
1957 (((
1958 (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1959 Weight / pcs : 170g
1960
1961
1962 (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1963
1964 )))
1965
1966 = 9. Reference =
1967
1968 * [[Datasheet, Photos, Decoder, Firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor]]
1969
1970
1971 = 10. FCC Warning =
1972
1973 (% _mstvisible="1" %)
1974 (((
1975 (% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
1976 This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1977 )))
1978
1979 (% _mstvisible="1" %)
1980 (((
1981 (% _msthash="506273" _msttexthash="44097638" _mstvisible="2" %)
1982 (1) This device may not cause harmful interference；
1983 )))
1984
1985 (% _mstvisible="1" %)
1986 (((
1987 (% _msthash="506274" _msttexthash="7559773" _mstvisible="2" %)
1988 (2) this device must accept any interference received, including interference that may cause undesired operation.
1989 )))