LHT65N LoRaWAN Temperature & Humidity Sensor Manual

The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% style="color:#4f81bd" %)**Temperature Sensor**(%%)**.**

23

)))

24

25

(((

26

The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

)))

(((

LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

)))

(((

LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

)))

(((

LHT65N supports (% style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

)))

(((

*The actual battery life depends on how often to send data, please see the battery analyzer chapter.

)))

== 1.2 Features ==

* Wall mountable

* LoRaWAN v1.0.3 Class A protocol

49

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

50

* AT Commands to change parameters

51

* Remote configure parameters via LoRaWAN Downlink

52

* Firmware upgradeable via program port

53

* Built-in 2400mAh battery for up to 10 years of use.

54

* Built-in Temperature & Humidity sensor

55

* Optional External Sensors

56

* Tri-color LED to indicate working status

57

* Datalog feature

58

59

== 1.3 Specification ==

60

61

(((

62

**Built-in Temperature Sensor:**

)))

* (((

Resolution: 0.01 °C

)))

* (((

Accuracy Tolerance : Typ ±0.3 °C

70

)))

71

* (((

72

Long Term Drift: < 0.02 °C/yr

73

)))

74

* (((

75

Operating Range: -40 ~~ 85 °C

)))

(((

**Built-in Humidity Sensor:**

)))

* (((

Resolution: 0.04 %RH

)))

* (((

Accuracy Tolerance : Typ ±3 %RH

87

)))

88

* (((

89

Long Term Drift: < 0.02 °C/yr

90

)))

91

* (((

92

Operating Range: 0 ~~ 96 %RH

)))

(((

**External Temperature Sensor:**

)))

* (((

Resolution: 0.0625 °C

101

)))

102

* (((

103

±0.5°C accuracy from -10°C to +85°C

104

)))

105

* (((

106

±2°C accuracy from -55°C to +125°C

107

)))

108

* (((

109

Operating Range: -55 °C ~~ 125 °C

110

)))

111

112

= 2. Connect LHT65N to IoT Server =

113

114

== 2.1 How does LHT65N work? ==

115

116

(((

117

LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.

)))

(((

If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.

122

)))

123

124

== 2.2 How to Activate LHT65N? ==

125

126

The LHT65N has two working modes:

127

128

* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.

129

* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.

130

131

(((

132

The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:

133

)))

134

135

[[image:image-20220515123819-1.png||height="379" width="317"]]

136

137

[[image:image-20220525110604-2.png]]

138

139

== 2.3 Example to join LoRaWAN network ==

140

141

(% class="wikigeneratedid" %)

142

This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.

143

144

(% class="wikigeneratedid" %)

145

[[image:image-20220522232442-1.png||height="387" width="648"]]

146

147

Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:

148

149

150

=== 2.3.1 Step 1: Create Device n TTN ===

151

152

Create a device in TTN V3 with the OTAA keys from LHT65N.

153

154

Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:

155

156

[[image:image-20220522232812-2.png||height="219" width="279"]]

157

158

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:

159

160

Add APP EUI in the application.

161

162

[[image:image-20220522232916-3.png]]

163

164

[[image:image-20220522232932-4.png]]

165

166

[[image:image-20220522232954-5.png]]

167

168

Note: LHT65N use same payload as LHT65.

169

170

[[image:image-20220522233026-6.png]]

171

172

173

Input APP EUI, APP KEY and DEV EUI:

174

175

[[image:image-20220522233118-7.png]]

176

177

178

=== 2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===

179

180

Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

181

182

[[image:image-20220522233300-8.png||height="219" width="722"]]

183

184

185

== 2.4 Uplink Payload ==

186

187

The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.

188

189

After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.

190

191

(% border="1" style="background-color:#ffffcc; color:green; width:426px" %)

192

|(% style="width:97px" %)(((

193

**Size(bytes)**

194

)))|(% style="width:39px" %)(((

195

**2**

196

)))|(% style="width:100px" %)(((

197

**2**

198

)))|(% style="width:77px" %)(((

199

**2**

200

)))|(% style="width:47px" %)(((

201

**1**

202

)))|(% style="width:51px" %)(((

203

**4**

204

)))

205

|(% style="width:97px" %)(((

206

**Value**

207

)))|(% style="width:39px" %)(((

208

[[BAT>>||anchor="H2.4.2BAT-BatteryInfo"]]

209

)))|(% style="width:100px" %)(((

210

(((

211

[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature"]]

212

)))

213

)))|(% style="width:77px" %)(((

214

(((

215

[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]

)))

(((

[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]

220

)))

221

)))|(% style="width:47px" %)(((

222

[[Ext>>||anchor="H2.4.5Ext23"]] #

223

)))|(% style="width:51px" %)(((

224

[[Ext value>>||anchor="H2.4.6Extvalue"]]

225

)))

226

227

* The First 6 bytes: has fix meanings for every LHT65N.

228

* The 7th byte (EXT #): defines the external sensor model.

229

* The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)

230

231

=== 2.4.1 Decoder in TTN V3 ===

232

233

When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.

234

235

Below is the position to put the decoder and LHT65N decoder can be download from here:

236

237

[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]

238

239

[[image:image-20220522234118-10.png||height="353" width="729"]]

240

241

=== 2.4.2 BAT-Battery Info ===

242

243

These two bytes of BAT include the battery state and the actually voltage

244

245

[[image:image-20220523152839-18.png]]

246

247

[[image:image-20220522235639-1.png||height="139" width="727"]]

248

249

Check the battery voltage for LHT65N.

250

251

* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good

252

* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV

253

254

=== 2.4.3 Built-in Temperature ===

255

256

[[image:image-20220522235639-2.png||height="138" width="722"]]

257

258

* Temperature: 0x0ABB/100=27.47℃

259

260

[[image:image-20220522235639-3.png]]

261

262

* Temperature: (0xF5C6-65536)/100=-26.18℃

263

264

=== 2.4.4 Built-in Humidity ===

265

266

[[image:image-20220522235639-4.png||height="138" width="722"]]

267

268

* Humidity: 0x025C/10=60.4%

=== 2.4.5 Ext # ===

Bytes for External Sensor:

273

274

[[image:image-20220523152822-17.png]]

275

276

=== 2.4.6 Ext value ===

277

278

==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====

279

280

[[image:image-20220522235639-5.png]]

281

282

* DS18B20 temp=0x0ADD/100=27.81℃

283

284

The last 2 bytes of data are meaningless

285

286

[[image:image-20220522235639-6.png]]

287

288

* External temperature= (0xF54F-65536)/100=-27.37℃

289

290

(((

291

The last 2 bytes of data are meaningless

)))

(((

If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃

)))

==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====

300

301

Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:

302

303

(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)

304

|(% style="width:96px" %)(((

305

**Size(bytes)**

306

)))|(% style="width:71px" %)(((

307

**2**

308

)))|(% style="width:99px" %)(((

309

**2**

310

)))|(% style="width:132px" %)(((

311

**2**

312

)))|(% style="width:54px" %)(((

313

**1**

314

)))|(% style="width:64px" %)(((

315

**4**

316

)))

317

|(% style="width:96px" %)(((

318

**Value**

319

)))|(% style="width:71px" %)(((

320

[[External temperature>>||anchor="H4.2SetExternalSensorMode"]]

321

)))|(% style="width:99px" %)(((

322

(((

323

[[Built-In>>||anchor="H2.4.3Built-inTemperature"]]

)))

(((

[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]

328

)))

329

)))|(% style="width:132px" %)(((

(((

BAT Status &

)))

(((

[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]

336

)))

337

)))|(% style="width:54px" %)(((

338

Status & Ext

339

)))|(% style="width:64px" %)(((

340

(((

341

[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]

)))

)))

* **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**

346

347

(% border="1" style="background-color:#ffffcc; color:green; width:469px" %)

348

|(% style="width:65px" %)Bit(bit)|(% style="width:267px" %)[15:14]|(% style="width:134px" %)[11:0]

349

|(% style="width:65px" %)Value|(% style="width:267px" %)(((

350

BAT Status

351

352

00(b): Ultra Low ( BAT <= 2.50v)

353

354

01(b): Low (2.50v <=BAT <= 2.55v)

355

356

10(b): OK (2.55v <= BAT <=2.65v)

357

358

11(b): Good (BAT >= 2.65v)

359

)))|(% style="width:134px" %)(((

360

[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]

)))

* **Status & Ext Byte**

366

367

[[image:image-20220523152434-16.png]]

368

369

* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.

370

* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.

371

* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)

372

373

== 2.5 Show data on Datacake ==

374

375

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

376

377

(((

378

**Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

**Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

Add Datacake:

)))

[[image:image-20220523000825-7.png||height="262" width="583"]]

390

391

392

Select default key as Access Key:

393

394

[[image:image-20220523000825-8.png||height="453" width="406"]]

395

396

In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT65 device.

397

398

[[image:image-20220523000825-9.png||height="366" width="392"]]

399

400

[[image:image-20220523000825-10.png||height="413" width="728"]]

401

402

== 2.6 Datalog Feature ==

403

404

Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.

405

406

=== 2.6.1 Ways to get datalog via LoRaWAN ===

407

408

There are two methods:

409

410

1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.

411

1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.

412

413

=== 2.6.2 Unix TimeStamp ===

414

415

LHT65N uses Unix TimeStamp format based on

416

417

[[image:image-20220523001219-11.png||height="97" width="627"]]

(((

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

)))

(((

Below is the converter example

426

)))

427

428

[[image:image-20220523001219-12.png||height="298" width="720"]]

429

430

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

431

432

=== 2.6.3 Set Device Time ===

433

434

(((

435

There are two ways to set device’s time:

)))

(((

**~1. Through LoRaWAN MAC Command (Default settings)**

)))

(((

User need to set SYNCMOD=1 to enable sync time via MAC command.

)))

(((

Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

)))

(((

Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.

)))

(((

)))

(((

**2. Manually Set Time**

)))

(((

User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.

464

)))

465

466

=== 2.6.4 Poll sensor value ===

467

468

User can poll sensor value based on timestamps from the server. Below is the downlink command.

469

470

[[image:image-20220523152302-15.png]]

471

472

(((

473

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command (% style="display:none" %) (%%)**31 5FC5F350 5FC6 0160 05**

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data

)))

(((

Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.

)))

=== 2.6.5 Datalog Uplink payload ===

490

491

The Datalog poll reply uplink will use below payload format.

492

493

(((

494

**Retrieval data payload**

495

)))

496

497

(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)

498

|(% style="width:93px" %)(((

(((

**Size(bytes)**

)))

)))|(% style="width:71px" %)(((

(((

**2**

)))

)))|(% style="width:102px" %)(((

(((

**2**

)))

)))|(% style="width:86px" %)(((

(((

**2**

)))

)))|(% style="width:86px" %)(((

(((

**1**

)))

)))|(% style="width:48px" %)(((

(((

**4**

)))

)))

|(% style="width:93px" %)(((

(((

**Value**

)))

)))|(% style="width:71px" %)(((

528

(((

529

[[External sensor data>>||anchor="H2.4.6Extvalue"]]

530

)))

531

)))|(% style="width:102px" %)(((

532

(((

533

(((

534

[[Built In>>||anchor="H2.4.3Built-inTemperature"]]

)))

)))

(((

(((

[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]

541

)))

542

)))

543

)))|(% style="width:86px" %)(((

544

(((

545

(((

546

[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]

)))

)))

(((

(((

[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]

553

)))

554

)))

555

)))|(% style="width:86px" %)(((

556

(((

557

Poll message flag & Ext

558

)))

559

)))|(% style="width:48px" %)(((

560

(((

561

(((

562

[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]

)))

)))

(((

(((

)))

)))

)))

**Poll message flag & Ext**

574

575

[[image:image-20220523152208-14.png]]

(((

(((

Poll Message Flag: 1: This message is a poll message reply.

)))

)))

* (((

(((

Poll Message Flag is set to 1.

)))

)))

* (((

(((

Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.

)))

)))

(((

(((

For example, in US915 band, the max payload for different DR is:

)))

)))

(((

(((

a) DR0: max is 11 bytes so one entry of data

)))

)))

(((

(((

b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

)))

)))

(((

(((

c) DR2: total payload includes 11 entries of data

)))

)))

(((

(((

d) DR3: total payload includes 22 entries of data.

)))

)))

(((

(((

If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0

)))

)))

**Example:**

If LHT65N has below data inside Flash:

634

635

[[image:image-20220523144455-1.png||height="335" width="735"]]

636

637

(((

638

If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705

)))

(((

Where : Start time: 60065F97 = time 21/1/19 04:27:03

)))

(((

Stop time 60066DA7= time 21/1/19 05:27:03

)))

(((

)))

(((

LHT65N will uplink this payload.

655

)))

656

657

[[image:image-20220523001219-13.png||height="421" width="727"]]

658

659

7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E

660

661

Where the first 11 bytes is for the first entry:

662

663

7FFF089801464160065F97

664

665

Ext sensor data=0x7FFF/100=327.67

666

667

Temp=0x0898/100=22.00

Hum=0x0146/10=32.6

poll message flag & Ext=0x41,means reply data,Ext=1

672

673

Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03

== 2.7 Alarm Mode ==

Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

679

680

(((

681

(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.

682

)))

683

684

**AT Commands for Alarm mode:**

685

686

(% class="box infomessage" %)

687

(((

688

(((

689

**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)

690

**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)

)))

)))

(% class="wikigeneratedid" %)

695

== ==

696

697

== 2.8 LED Indicator ==

698

699

(((

700

The LHT65N has a triple color LED which for easy shows different stage.

)))

(((

While pressing ACT button, the LED will work as per LED status with ACT button.

)))

(((

In a normal working state:

)))

* (((

For each uplink, the BLUE LED or RED LED will blink once.

713

)))

714

* (((

715

BLUE LED when an external sensor is connected

716

)))

717

* (((

718

RED LED when an external sensor is not connected

719

)))

720

* (((

721

For each success downlink, the PURPLE LED will blink once

)))

----

== 2.9 Installation ==

727

728

[[image:image-20220516231650-1.png||height="436" width="428"]]

729

730

= 3. Sensors & Accessories =

731

732

== 3.1 E3 Temperature Probe ==

733

734

[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]

735

736

737

With Temperature sensor with 2 meters cable long

738

739

* Resolution: 0.0625 °C

740

* ±0.5°C accuracy from -10°C to +85°C

741

* ±2°C accuracy from -55°C to +125°C

742

* Operating Range: -40 ~~ 125 °C

743

* -55°C to 125°C

744

* Working voltage 2.35v ~~ 5v

745

746

= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =

747

748

(((

749

Use can configure LHT65N via AT Command or LoRaWAN Downlink.

)))

* (((

AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

754

)))

755

* (((

756

LoRaWAN Downlink instruction for different platforms:

)))

(((

[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

)))

(((

There are two kinds of commands to configure LHT65N, they are:

)))

(((

(% style="color:#4f81bd" %)* **General Commands**.

)))

(((

These commands are to configure:

)))

* (((

General system settings like: uplink interval.

777

)))

778

* (((

779

LoRaWAN protocol & radio-related commands.

)))

(((

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:

)))

(((

[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

)))

(((

(% style="color:#4f81bd" %)* **Commands special design for LHT65N**

)))

(((

These commands are only valid for LHT65N, as below:

796

)))

797

798

== 4.1 Set Transmit Interval Time ==

799

800

Feature: Change LoRaWAN End Node Transmit Interval.

801

802

**AT Command: AT+TDC**

803

804

[[image:image-20220523150701-2.png]]

805

806

(((

807

**Downlink Command: 0x01**

)))

(((

Format: Command Code (0x01) followed by 3 bytes time value.

)))

(((

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

)))

* (((

**Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

820

)))

821

* (((

822

**Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

823

)))

824

825

== 4.2 Set External Sensor Mode ==

826

827

Feature: Change External Sensor Mode.

828

829

**AT Command: AT+EXT**

830

831

[[image:image-20220523150759-3.png]]

832

833

(((

834

**Downlink Command: 0xA2**

)))

(((

Total bytes: 2 ~~ 5 bytes

)))

(((

**Example:**

)))

* (((

0xA201: Set external sensor type to E1

847

)))

848

* (((

849

0xA209: Same as AT+EXT=9

850

)))

851

* (((

852

0xA20702003c,Same as AT+SETCNT=60

853

)))

854

855

== 4.3 Enable/Disable uplink Temperature probe ID ==

856

857

Feature: If PID is enabled, device will send the temperature probe ID on:

858

859

* First Packet after OTAA Join

860

* Every 24 hours since the first packet.

861

862

PID is default set to disable (0)

**AT Command:**

[[image:image-20220523150928-4.png]]

867

868

**Downlink Command:**

869

870

* 0xA800 **~-~->** AT+PID=0

871

* 0xA801 **~-~->** AT+PID=1

872

873

== 4.4 Set Password ==

874

875

Feature: Set device password, max 9 digits

876

877

**AT Command: AT+PWORD**

878

879

[[image:image-20220523151052-5.png]]

880

881

(((

882

**Downlink Command:**

)))

(((

No downlink command for this feature.

887

)))

888

889

== 4.5 Quit AT Command ==

890

891

Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.

892

893

**AT Command: AT+DISAT**

894

895

[[image:image-20220523151132-6.png]]

896

897

**Downlink Command:**

898

899

No downlink command for this feature.

900

901

== 4.6 Set to sleep mode ==

902

903

Feature: Set device to sleep mode

904

905

**AT Command: AT+SLEEP**

906

907

[[image:image-20220523151218-7.png]]

908

909

**Downlink Command:**

910

911

* There is no downlink command to set to Sleep mode.

912

913

== 4.7 Set system time ==

914

915

Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]

**AT Command:**

[[image:image-20220523151253-8.png]]

920

921

**Downlink Command:**

922

923

0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352

924

925

== 4.8 Set Time Sync Mode ==

926

927

(((

928

Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.

)))

(((

SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.

)))

(((

**AT Command:**

)))

[[image:image-20220523151336-9.png]]

940

941

**Downlink Command:**

942

943

0x28 01 ~/~/ Same As AT+SYNCMOD=1

944

945

0x28 00 ~/~/ Same As AT+SYNCMOD=0

946

947

== 4.9 Set Time Sync Interval ==

948

949

Feature: Define System time sync interval. SYNCTDC default value: 10 days.

**AT Command:**

[[image:image-20220523151411-10.png]]

954

955

**Downlink Command:**

956

957

0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A

958

959

== 4.10 Print data entries base on page. ==

960

961

Feature: Print the sector data from start page to stop page (max is 416 pages).

962

963

**AT Command: AT+PDTA**

964

965

[[image:image-20220523151450-11.png]]

966

967

**Downlink Command:**

968

969

No downlink commands for feature

970

971

== 4.11 Print last few data entries. ==

972

973

Feature: Print the last few data entries

974

975

**AT Command: AT+PLDTA**

976

977

[[image:image-20220523151524-12.png]]

978

979

**Downlink Command:**

980

981

No downlink commands for feature

982

983

== 4.12 Clear Flash Record ==

984

985

Feature: Clear flash storage for data log feature.

986

987

**AT Command: AT+CLRDTA**

988

989

[[image:image-20220523151556-13.png]]

990

991

**Downlink Command: 0xA3**

992

993

* Example: 0xA301 ~/~/Same as AT+CLRDTA

994

995

== 4.13 Auto Send None-ACK messages ==

996

997

Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.

998

999

1000

**AT Command: AT+PNACKMD**

1001

1002

The default factory setting is 0

1003

1004

(% border="1" style="background-color:#ffffcc; color:green; width:450px" %)

1005

|=(% style="width: 171px;" %)**Command Example**|=(% style="width: 219px;" %)**Function**|=(% style="width: 119px;" %)**Response**

1006

|(% style="width:171px" %)AT+PNACKMD=1|(% style="width:219px" %)Poll None-ACK message|(% style="width:119px" %)OK

1007

1008

**Downlink Command: 0x34**

1009

1010

* Example: 0x3401 ~/~/Same as AT+PNACKMD=1

1011

1012

= 5. Battery & How to replace =

1013

1014

== 5.1 Battery Type ==

1015

1016

LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.

1017

1018

(((

1019

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

1020

[[image:image-20220515075034-1.png||height="208" width="644"]]

)))

(((

The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.

)))

== 5.2 Replace Battery ==

1029

1030

LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.

1031

1032

[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]

1033

1034

== 5.3 Battery Life Analyze ==

1035

1036

(((

1037

Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:

1038