Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -407,8 +407,8 @@
407	407
408	408	There are two methods:
409	409
410		-1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>PollSensorValue]].
411		-1.
	410	+1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
	411	+1. Set PNACKMD=1, LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will sent all messages after network recover.
412	412
413	413	=== 2.6.2 Unix TimeStamp ===
414	414
...	...	@@ -463,7 +463,7 @@
463	463	User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
464	464	)))
465	465
466		-=== [[2.6.4 Poll sensor value>>2.6.4 Poll sensor value||anchor="PollSensorValue"]] ===
	466	+=== 2.6.4 Poll sensor value ===
467	467
468	468	User can poll sensor value based on timestamps from the server. Below is the downlink command.
469	469
...	...	@@ -996,6 +996,25 @@
996	996
997	997	* Example: 0xA301 ~/~/Same as AT+CLRDTA
998	998
	999	+
	1000	+== 4.13 Auto Send None-ACK messages ==
	1001	+
	1002	+Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
	1003	+
	1004	+
	1005	+**AT Command: AT+PNACKMD**
	1006	+
	1007	+The default factory setting is 0
	1008	+
	1009	+|**Command Example**|**Function**|**Response**
	1010	+|AT+PNACKMD=1|Poll None-ACK message|OK
	1011	+
	1012	+
	1013	+**Downlink Command: 0x34**
	1014	+
	1015	+* Example: 0x3401 ~/~/Same as AT+PNACKMD=1
	1016	+
	1017	+
999	999	= 5. Battery & How to replace =
1000	1000
1001	1001	== 5.1 Battery Type ==