Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -407,10 +407,9 @@
407	407
408	408	There are two methods:
409	409
410		-1. IoT Server sends a downlink LoRaWAN command to [poll the value>PollSensorValue].
411		-1.
	410	+1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
	411	+1. Set PNACKMD=1, LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will sent all messages after network recover.
412	412
413		-
414	414	=== 2.6.2 Unix TimeStamp ===
415	415
416	416	LHT65N uses Unix TimeStamp format based on
...	...	@@ -464,7 +464,7 @@
464	464	User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
465	465	)))
466	466
467		-=== [[2.6.4 Poll sensor value>>2.6.4 Poll sensor value||anchor="PollSensorValue"]] ===
	466	+=== 2.6.4 Poll sensor value ===
468	468
469	469	User can poll sensor value based on timestamps from the server. Below is the downlink command.
470	470
...	...	@@ -997,6 +997,25 @@
997	997
998	998	* Example: 0xA301 ~/~/Same as AT+CLRDTA
999	999
	999	+
	1000	+== 4.13 Auto Send None-ACK messages ==
	1001	+
	1002	+Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
	1003	+
	1004	+
	1005	+**AT Command: AT+PNACKMD**
	1006	+
	1007	+The default factory setting is 0
	1008	+
	1009	+|**Command Example**|**Function**|**Response**
	1010	+|AT+PNACKMD=1|Poll None-ACK message|OK
	1011	+
	1012	+
	1013	+**Downlink Command: 0x34**
	1014	+
	1015	+* Example: 0x3401 ~/~/Same as AT+PNACKMD=1
	1016	+
	1017	+
1000	1000	= 5. Battery & How to replace =
1001	1001
1002	1002	== 5.1 Battery Type ==