Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 15 removed)
  • image-20220523151052-5.png
  • image-20220523151132-6.png
  • image-20220523151218-7.png
  • image-20220523151253-8.png
  • image-20220523151336-9.png
  • image-20220523151411-10.png
  • image-20220523151450-11.png
  • image-20220523151524-12.png
  • image-20220523151556-13.png
  • image-20220523152208-14.png
  • image-20220523152302-15.png
  • image-20220523152434-16.png
  • image-20220523152822-17.png
  • image-20220523152839-18.png
  • image-20220523153201-19.png

Details

Page properties

Content

...	...	@@ -132,7 +132,11 @@
132	132
133	133	[[image:image-20220515123819-1.png||height="379" width="317"]]
134	134
135		-[[image:image-20220523153201-19.png||height="163" width="739"]]
	135	+(% border="1" style="background-color:#ffffcc; color:green; width:739px" %)
	136	+|**Behavior on ACT**|**Function**|(% style="width:424px" %)**Action**
	137	+|**Pressing ACT between 1s < time < 3s**|Test uplink status|(% style="width:424px" %)If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
	138	+|**Pressing ACT for more than 3s**|Active Device|(% style="width:424px" %)green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
	139	+|**Fast press ACT 5 times**|Deactivate Device|(% style="width:424px" %)red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
136	136
137	137	== 2.3 Example to join LoRaWAN network ==
138	138
...	...	@@ -186,30 +186,35 @@
186	186
187	187	After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
188	188
189		-(% border="1" style="background-color:#ffffcc; color:green; width:426px" %)
190		-|(% style="width:97px" %)(((
	193	+
	194	+(% border="1" style="background-color:#ffffcc; color:green; width:428px" %)
	195	+|(% style="width:106px" %)(((
191	191	**Size(bytes)**
192		-)))|(% style="width:39px" %)(((
	197	+)))|(% style="width:46px" %)(((
193	193	**2**
194		-)))|(% style="width:100px" %)(((
	199	+)))|(% style="width:104px" %)(((
195	195	**2**
196		-)))|(% style="width:77px" %)(((
	201	+)))|(% style="width:80px" %)(((
197	197	**2**
198		-)))|(% style="width:47px" %)(((
199		-**1**
200	200	)))|(% style="width:51px" %)(((
	204	+**1**
	205	+)))|(% style="width:35px" %)(((
201	201	**4**
202	202	)))
203		-|(% style="width:97px" %)(((
	208	+|(% style="width:106px" %)(((
204	204	**Value**
205		-)))|(% style="width:39px" %)(((
	210	+)))|(% style="width:46px" %)(((
206	206	[[BAT>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.2BAT-BatteryInfo]]
207		-)))|(% style="width:100px" %)(((
	212	+)))|(% style="width:104px" %)(((
208	208	(((
209		-[[Built-In Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
	214	+[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
210	210	)))
211		-)))|(% style="width:77px" %)(((
	216	+
212	212	(((
	218	+[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
	219	+)))
	220	+)))|(% style="width:80px" %)(((
	221	+(((
213	213	[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
214	214	)))
215	215
...	...	@@ -216,9 +216,9 @@
216	216	(((
217	217	[[Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
218	218	)))
219		-)))|(% style="width:47px" %)(((
220		-[[Ext>>path:#Extension_Sensor]] #
221	221	)))|(% style="width:51px" %)(((
	229	+[[Ext>>path:#Extension_Sensor]] #
	230	+)))|(% style="width:35px" %)(((
222	222	[[Ext value>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
223	223	)))
224	224
...	...	@@ -240,8 +240,40 @@
240	240
241	241	These two bytes of BAT include the battery state and the actually voltage
242	242
243		-[[image:image-20220523152839-18.png]]
	252	+(% border="1" style="background-color:#ffffcc; color:green; width:502px" %)
	253	+|(% style="width:75px" %)(((
	254	+Bit(bit)
	255	+)))|(% style="width:259px" %)(((
	256	+[15:14]
	257	+)))|(% style="width:164px" %)(((
	258	+[13:0]
	259	+)))
	260	+|(% style="width:75px" %)(((
	261	+Value
	262	+)))|(% style="width:259px" %)(((
	263	+(((
	264	+BAT Status
	265	+)))
244	244
	267	+(((
	268	+00(b): Ultra Low ( BAT <= 2.50v)
	269	+)))
	270	+
	271	+(((
	272	+01(b): Low  (2.50v <=BAT <= 2.55v)
	273	+)))
	274	+
	275	+(((
	276	+10(b): OK   (2.55v <= BAT <=2.65v)
	277	+)))
	278	+
	279	+(((
	280	+11(b): Good   (BAT >= 2.65v)
	281	+)))
	282	+)))|(% style="width:164px" %)(((
	283	+Actually BAT voltage
	284	+)))
	285	+
245	245	[[image:image-20220522235639-1.png||height="139" width="727"]]
246	246
247	247	Check the battery voltage for LHT65N.
...	...	@@ -269,7 +269,10 @@
269	269
270	270	Bytes for External Sensor:
271	271
272		-[[image:image-20220523152822-17.png]]
	313	+(% border="1" style="background-color:#ffffcc; color:green; width:473px" %)
	314	+|(% style="width:139px" %)**EXT # Value**|(% style="width:331px" %)**External Sensor Type**
	315	+|(% style="width:139px" %)0x01|(% style="width:331px" %)Sensor E3, Temperature Sensor
	316	+|(% style="width:139px" %)0x09|(% style="width:331px" %)Sensor E3, Temperature Sensor, Datalog Mod
273	273
274	274	=== 2.4.6 Ext value ===
275	275
...	...	@@ -298,47 +298,21 @@
298	298
299	299	Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
300	300
301		-(% border="1" style="background-color:#ffffcc; color:green; width:520px" %)
302		-|(% style="width:96px" %)(((
303		-**Size(bytes)**
304		-)))|(% style="width:71px" %)(((
305		-**2**
306		-)))|(% style="width:99px" %)(((
307		-**2**
308		-)))|(% style="width:132px" %)(((
309		-**2**
310		-)))|(% style="width:54px" %)(((
311		-**1**
312		-)))|(% style="width:64px" %)(((
313		-**4**
314		-)))
315		-|(% style="width:96px" %)(((
316		-**Value**
317		-)))|(% style="width:71px" %)(((
318		-[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]
319		-)))|(% style="width:99px" %)(((
320		-(((
	345	+(% border="1" style="background-color:#ffffcc; color:green; width:541px" %)
	346	+|(% style="width:96px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:69px" %)**2**|(% style="width:88px" %)**2**|(% style="width:69px" %)**1**|(% style="width:85px" %)**4**
	347	+|(% style="width:96px" %)**Value**|(% style="width:71px" %)[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]|(% style="width:69px" %)(((
321	321	[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
322		-)))
323	323
324		-(((
325	325	[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
326		-)))
327		-)))|(% style="width:132px" %)(((
328		-(((
	351	+)))|(% style="width:88px" %)(((
329	329	BAT Status &
330		-)))
331	331
332		-(((
333		-[[Built-in Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
334		-)))
335		-)))|(% style="width:54px" %)(((
336		-Status & Ext
337		-)))|(% style="width:64px" %)(((
338		-(((
	354	+[[Built-in>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	355	+
	356	+[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	357	+)))|(% style="width:69px" %)Status & Ext|(% style="width:85px" %)(((
339	339	[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.1SetTransmitIntervalTime]]
340	340	)))
341		-)))
342	342
343	343	* **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**
344	344
...	...	@@ -362,7 +362,11 @@
362	362
363	363	* **Status & Ext Byte**
364	364
365		-[[image:image-20220523152434-16.png]]
	383	+(% border="1" style="background-color:#ffffcc; color:green; width:587px" %)
	384	+|(% style="width:109px" %)**Bits**|(% style="width:105px" %)**7**|(% style="width:105px" %)**6**|(% style="width:82px" %)**5**|(% style="width:84px" %)**4**|(% style="width:97px" %)**[3:0]**
	385	+|(% style="width:109px" %)**Status & Ext**|(% style="width:105px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:82px" %)Sync time OK|(% style="width:84px" %)Unix Time Request|(% style="width:97px" %)(((
	386	+Ext:0b(1001)
	387	+)))
366	366
367	367	* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
368	368	* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
...	...	@@ -458,8 +458,11 @@
458	458
459	459	User can poll sensor value based on timestamps from the server. Below is the downlink command.
460	460
461		-[[image:image-20220523152302-15.png]]
462	462
	484	+(% border="1" style="background-color:#ffffcc; color:green; width:427px" %)
	485	+|(% style="width:61px" %)1byte|(% style="width:126px" %)4bytes|(% style="width:120px" %)4bytes|(% style="width:115px" %)1byte
	486	+|(% style="width:61px" %)31|(% style="width:126px" %)Timestamp start|(% style="width:120px" %)Timestamp end|(% style="width:115px" %)Uplink Interval
	487	+
463	463	(((
464	464	Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
465	465	)))
...	...	@@ -485,138 +485,100 @@
485	485	**Retrieval data payload**
486	486	)))
487	487
488		-(% border="1" style="background-color:#ffffcc; color:green; width:469px" %)
	513	+(% border="1" style="background-color:#ffffcc; color:green; width:545px" %)
489	489	|(% style="width:93px" %)(((
490		-(((
491	491	**Size(bytes)**
492		-)))
493	493	)))|(% style="width:71px" %)(((
494		-(((
495	495	**2**
496		-)))
497	497	)))|(% style="width:102px" %)(((
498		-(((
499	499	**2**
500		-)))
501	501	)))|(% style="width:86px" %)(((
502		-(((
503	503	**2**
504		-)))
505		-)))|(% style="width:86px" %)(((
506		-(((
	522	+)))|(% style="width:90px" %)(((
507	507	**1**
508		-)))
509		-)))|(% style="width:48px" %)(((
510		-(((
	524	+)))|(% style="width:85px" %)(((
511	511	**4**
512	512	)))
513		-)))
514	514	|(% style="width:93px" %)(((
515		-(((
516	516	**Value**
517		-)))
518	518	)))|(% style="width:71px" %)(((
519		-(((
520	520	[[External sensor data>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
521		-)))
522	522	)))|(% style="width:102px" %)(((
523	523	(((
524		-(((
525	525	[[Built In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
526	526	)))
527		-)))
528	528
529	529	(((
530		-(((
531	531	[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
532	532	)))
533		-)))
534	534	)))|(% style="width:86px" %)(((
535	535	(((
536		-(((
537	537	[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
538	538	)))
539		-)))
540	540
541	541	(((
542		-(((
543	543	[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
544	544	)))
545		-)))
546		-)))|(% style="width:86px" %)(((
547		-(((
	547	+)))|(% style="width:90px" %)(((
548	548	[[Poll message flag & Ext>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.4DatalogUplinkpayload]]
549		-)))
550		-)))|(% style="width:48px" %)(((
	549	+)))|(% style="width:85px" %)(((
551	551	(((
552		-(((
553	553	[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.1UnixTimeStamp]]
554	554	)))
555		-)))
556	556
557	557	(((
558		-(((
559	559
560	560	)))
561	561	)))
562		-)))
563	563
564	564	**Poll message flag & Ext**
565	565
566		-[[image:image-20220523152208-14.png]]
	561	+(% border="1" style="background-color:#ffffcc; color:green; width:540px" %)
	562	+|(% style="width:81px" %)**Bits**|(% style="width:100px" %)**7**|(% style="width:105px" %)**6**|(% style="width:84px" %)**5**|(% style="width:85px" %)**4**|(% style="width:79px" %)**[3:0]**
	563	+|(% style="width:81px" %)**Status & Ext**|(% style="width:100px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:84px" %)Sync time OK|(% style="width:85px" %)Unix Time Request|(% style="width:79px" %)(((
	564	+(((
	565	+Ext:
	566	+)))
567	567
568	568	(((
	569	+0b(1001)
	570	+)))
	571	+)))
	572	+
569	569	(((
570	570	Poll Message Flag: 1: This message is a poll message reply.
571	571	)))
572		-)))
573	573
574	574	* (((
575		-(((
576	576	Poll Message Flag is set to 1.
577	577	)))
578		-)))
579	579	* (((
580		-(((
581	581	Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
582	582	)))
583		-)))
584	584
585	585	(((
586		-(((
587	587	For example, in US915 band, the max payload for different DR is:
588	588	)))
589		-)))
590	590
591	591	(((
592		-(((
593	593	a) DR0: max is 11 bytes so one entry of data
594	594	)))
595		-)))
596	596
597	597	(((
598		-(((
599	599	b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
600	600	)))
601		-)))
602	602
603	603	(((
604		-(((
605	605	c) DR2: total payload includes 11 entries of data
606	606	)))
607		-)))
608	608
609	609	(((
610		-(((
611	611	d) DR3: total payload includes 22 entries of data.
612	612	)))
613		-)))
614	614
615	615	(((
616		-(((
617	617	If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0
618	618	)))
619		-)))
620	620
621	621
622	622	**Example:**
...	...	@@ -625,25 +625,14 @@
625	625
626	626	[[image:image-20220523144455-1.png||height="335" width="735"]]
627	627
628		-(((
629	629	If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705
630		-)))
631	631
632		-(((
633	633	Where : Start time: 60065F97 = time 21/1/19 04:27:03
634		-)))
635	635
636		-(((
637	637	Stop time 60066DA7= time 21/1/19 05:27:03
638		-)))
639	639
640		-(((
641		-
642		-)))
643	643
644		-(((
645	645	LHT65N will uplink this payload.
646		-)))
647	647
648	648	[[image:image-20220523001219-13.png||height="421" width="727"]]
649	649
...	...	@@ -667,27 +667,19 @@
667	667
668	668	Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
669	669
670		-(((
671	671	(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
672		-)))
673	673
674		-(((
675	675	**AT Commands for Alarm mode:**
676		-)))
677	677
678	678	(% class="box infomessage" %)
679	679	(((
680		-(((
681	681	**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)
682	682	)))
683		-)))
684	684
685	685	(% class="box infomessage" %)
686	686	(((
687		-(((
688	688	**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
689	689	)))
690		-)))
691	691
692	692	== 2.8 LED Indicator ==
693	693
...	...	@@ -740,55 +740,29 @@
740	740
741	741	= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
742	742
743		-(((
744	744	Use can configure LHT65N via AT Command or LoRaWAN Downlink.
745		-)))
746	746
747		-* (((
748		-AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
749		-)))
750		-* (((
751		-LoRaWAN Downlink instruction for different platforms:
752		-)))
	713	+* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
	714	+* LoRaWAN Downlink instruction for different platforms:
753	753
754		-(((
755	755	[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
756		-)))
757	757
758		-(((
759	759	There are two kinds of commands to configure LHT65N, they are:
760		-)))
761	761
762		-(((
763	763	(% style="color:#4f81bd" %)* **General Commands**.
764		-)))
765	765
766		-(((
767	767	These commands are to configure:
768		-)))
769	769
770		-* (((
771		-General system settings like: uplink interval.
772		-)))
773		-* (((
774		-LoRaWAN protocol & radio-related commands.
775		-)))
	724	+* General system settings like: uplink interval.
	725	+* LoRaWAN protocol & radio-related commands.
776	776
777		-(((
778	778	They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
779		-)))
780	780
781		-(((
782	782	[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
783		-)))
784	784
785		-(((
786	786	(% style="color:#4f81bd" %)* **Commands special design for LHT65N**
787		-)))
788	788
789		-(((
790	790	These commands are only valid for LHT65N, as below:
791		-)))
792	792
793	793	== 4.1 Set Transmit Interval Time ==
794	794
...	...	@@ -796,26 +796,29 @@
796	796
797	797	**AT Command: AT+TDC**
798	798
799		-[[image:image-20220523150701-2.png]]
	741	+(% border="1" %)
	742	+|**Command Example**|**Function**|**Response**
	743	+|AT+TDC?|Show current transmit Interval|(((
	744	+30000
800	800
801		-(((
802		-**Downlink Command: 0x01**
	746	+OK
	747	+
	748	+the interval is 30000ms = 30s
803	803	)))
	750	+|AT+TDC=60000|Set Transmit Interval|(((
	751	+OK
804	804
805		-(((
806		-Format: Command Code (0x01) followed by 3 bytes time value.
	753	+Set transmit interval to 60000ms = 60 seconds
807	807	)))
808	808
809		-(((
	756	+**Downlink Command: 0x01**
	757	+
	758	+Format: Command Code (0x01) followed by 3 bytes time value.
	759	+
810	810	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
811		-)))
812	812
813		-* (((
814		-**Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
815		-)))
816		-* (((
817		-**Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
818		-)))
	762	+* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	763	+* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
819	819
820	820	== 4.2 Set External Sensor Mode ==
821	821
...	...	@@ -823,29 +823,27 @@
823	823
824	824	**AT Command: AT+EXT**
825	825
826		-[[image:image-20220523150759-3.png]]
	771	+(% border="1" %)
	772	+|**Command Example**|**Function**|**Response**
	773	+|AT+EXT?|Get current external sensor mode|(((
	774	+1
827	827
828		-(((
829		-**Downlink Command: 0xA2**
	776	+OK
	777	+
	778	+External Sensor mode =1
830	830	)))
	780	+|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1
	781	+|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp
831	831
832		-(((
	783	+**Downlink Command: 0xA2**
	784	+
833	833	Total bytes: 2 ~~ 5 bytes
834		-)))
835	835
836		-(((
837		-**Example:**
838		-)))
	787	+Example:
839	839
840		-* (((
841		-0xA201: Set external sensor type to E1
842		-)))
843		-* (((
844		-0xA209: Same as AT+EXT=9
845		-)))
846		-* (((
847		-0xA20702003c,Same as AT+SETCNT=60
848		-)))
	789	+* 0xA201: Set external sensor type to E1
	790	+* 0xA209: Same as AT+EXT=9
	791	+* 0xA20702003c,Same as AT+SETCNT=60
849	849
850	850	== 4.3 Enable/Disable uplink Temperature probe ID ==
851	851
...	...	@@ -856,14 +856,17 @@
856	856
857	857	PID is default set to disable (0)
858	858
	802	+
859	859	**AT Command:**
860	860
861		-[[image:image-20220523150928-4.png]]
	805	+(% border="1" %)
	806	+|**Command Example**|**Function**|**Response**
	807	+|AT+PID=1|Enable PID uplink|OK
862	862
863	863	**Downlink Command:**
864	864
865		-* 0xA800  **~-~->** AT+PID=0
866		-* 0xA801     **~-~->** AT+PID=1
	811	+* 0xA800     à AT+PID=0
	812	+* 0xA801     à AT+PID=1
867	867
868	868	== 4.4 Set Password ==
869	869
...	...	@@ -871,15 +871,19 @@
871	871
872	872	**AT Command: AT+PWORD**
873	873
874		-[[image:image-20220523151052-5.png]]
	820	+(% border="1" %)
	821	+|**Command Example**|**Function**|**Response**
	822	+|AT+PWORD=?|Show password|(((
	823	+123456
875	875
876		-(((
877		-**Downlink Command:**
	825	+
	826	+OK
878	878	)))
	828	+|AT+PWORD=999999|Set password|OK
879	879
880		-(((
	830	+**Downlink Command:**
	831	+
881	881	No downlink command for this feature.
882		-)))
883	883
884	884	== 4.5 Quit AT Command ==
885	885
...	...	@@ -887,12 +887,15 @@
887	887
888	888	**AT Command: AT+DISAT**
889	889
890		-[[image:image-20220523151132-6.png]]
	840	+(% border="1" %)
	841	+|**Command Example**|**Function**|**Response**
	842	+|AT+DISAT|Quit AT Commands mode|OK
891	891
892	892	**Downlink Command:**
893	893
894	894	No downlink command for this feature.
895	895
	848	+
896	896	== 4.6 Set to sleep mode ==
897	897
898	898	Feature: Set device to sleep mode
...	...	@@ -899,8 +899,15 @@
899	899
900	900	**AT Command: AT+SLEEP**
901	901
902		-[[image:image-20220523151218-7.png]]
	855	+(% border="1" %)
	856	+| | |
	857	+|**Command Example**|**Function**|**Response**
	858	+|AT+SLEEP|Set to sleep mode|(((
	859	+Clear all stored sensor data…
903	903
	861	+OK
	862	+)))
	863	+
904	904	**Downlink Command:**
905	905
906	906	* There is no downlink command to set to Sleep mode.
...	...	@@ -911,8 +911,14 @@
911	911
912	912	**AT Command:**
913	913
914		-[[image:image-20220523151253-8.png]]
	874	+(% border="1" %)
	875	+|**Command Example**|**Function**
	876	+|AT+TIMESTAMP=1611104352|(((
	877	+OK
915	915
	879	+Set System time to 2021-01-20 00:59:12
	880	+)))
	881	+
916	916	**Downlink Command:**
917	917
918	918	0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
...	...	@@ -919,19 +919,15 @@
919	919
920	920	== 4.8 Set Time Sync Mode ==
921	921
922		-(((
923	923	Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
924		-)))
925	925
926		-(((
927	927	SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
928		-)))
929	929
930		-(((
	892	+
931	931	**AT Command:**
932		-)))
933	933
934		-[[image:image-20220523151336-9.png]]
	895	+|**Command Example**|**Function**
	896	+|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)
935	935
936	936	**Downlink Command:**
937	937
...	...	@@ -945,7 +945,9 @@
945	945
946	946	**AT Command:**
947	947
948		-[[image:image-20220523151411-10.png]]
	910	+(% border="1" %)
	911	+|**Command Example**|**Function**
	912	+|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
949	949
950	950	**Downlink Command:**
951	951
...	...	@@ -957,8 +957,51 @@
957	957
958	958	**AT Command: AT+PDTA**
959	959
960		-[[image:image-20220523151450-11.png]]
	924	+(% border="1" %)
	925	+|**Command Example**|**Response**
	926	+|(((
	927	+AT+PDTA=1,3
961	961
	929	+
	930	+
	931	+Print page 1 to 3
	932	+)))|(((
	933	+8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31
	934	+
	935	+8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93
	936	+
	937	+8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06
	938	+
	939	+8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12
	940	+
	941	+8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06
	942	+
	943	+8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68
	944	+
	945	+8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56
	946	+
	947	+8019570
	948	+
	949	+8019580
	950	+
	951	+8019590
	952	+
	953	+80195A0
	954	+
	955	+80195B0
	956	+
	957	+80195C0
	958	+
	959	+80195D0
	960	+
	961	+80195E0
	962	+
	963	+80195F0
	964	+
	965	+
	966	+OK
	967	+)))
	968	+
962	962	**Downlink Command:**
963	963
964	964	No downlink commands for feature
...	...	@@ -969,8 +969,32 @@
969	969
970	970	**AT Command: AT+PLDTA**
971	971
972		-[[image:image-20220523151524-12.png]]
	979	+(% border="1" %)
	980	+|**Command Example**|**Response**
	981	+|(((
	982	+AT+PLDTA=5
973	973
	984	+
	985	+
	986	+Print last 5 entries
	987	+)))|(((
	988	+Stop Tx and RTP events when read sensor data
	989	+
	990	+1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75
	991	+
	992	+2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43
	993	+
	994	+3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56
	995	+
	996	+4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75
	997	+
	998	+5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43
	999	+
	1000	+Start Tx and RTP events
	1001	+
	1002	+OK
	1003	+)))
	1004	+
974	974	**Downlink Command:**
975	975
976	976	No downlink commands for feature
...	...	@@ -981,8 +981,14 @@
981	981
982	982	**AT Command: AT+CLRDTA**
983	983
984		-[[image:image-20220523151556-13.png]]
	1015	+(% border="1" %)
	1016	+|**Command Example**|**Function**|**Response**
	1017	+|AT+CLRDTA|Clear date record|(((
	1018	+Clear all stored sensor data…
985	985
	1020	+OK
	1021	+)))
	1022	+
986	986	**Downlink Command: 0xA3**
987	987
988	988	* Example: 0xA301 ~/~/Same as AT+CLRDTA
...	...	@@ -993,15 +993,11 @@
993	993
994	994	LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
995	995
996		-(((
997	997	The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
998	998	[[image:image-20220515075034-1.png||height="208" width="644"]]
999		-)))
1000	1000
1001		-(((
1002	1002	The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1003	1003
1004		-)))
1005	1005
1006	1006	== 5.2 Replace Battery ==
1007	1007
...	...	@@ -1011,97 +1011,47 @@
1011	1011
1012	1012	== 5.3 Battery Life Analyze ==
1013	1013
1014		-(((
1015	1015	Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1016	1016	https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
1017		-)))
1018	1018
1019	1019	= 6. Order Info =
1020	1020
1021		-(((
1022		-Part Number: (% style="color:#4f81bd" %)** LHT65N-XX-YY**
1023		-)))
	1052	+Part Number: (% class="mark" %)**LHT65N-XX**
1024	1024
1025		-(((
1026		-(% style="color:#4f81bd" %)**XX **(%%): The default frequency band
1027		-)))
	1054	+**XX**: The default frequency band
1028	1028
1029		-* (((
1030		-(% style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1031		-)))
1032		-* (((
1033		-(% style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1034		-)))
1035		-* (((
1036		-(% style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1037		-)))
1038		-* (((
1039		-(% style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1040		-)))
1041		-* (((
1042		-(% style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1043		-)))
1044		-* (((
1045		-(% style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1046		-)))
1047		-* (((
1048		-(% style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1049		-)))
1050		-* (((
1051		-(% style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1052		-)))
	1056	+* **AS923**: LoRaWAN AS923 band
	1057	+* **AU915**: LoRaWAN AU915 band
	1058	+* **EU433**: LoRaWAN EU433 band
	1059	+* **EU868**: LoRaWAN EU868 band
	1060	+* **KR920**: LoRaWAN KR920 band
	1061	+* **US915**: LoRaWAN US915 band
	1062	+* **IN865**: LoRaWAN IN865 band
	1063	+* **CN470**: LoRaWAN CN470 band
1053	1053
1054		-(((
1055		-(% style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1056		-)))
	1065	+**YY**: Sensor Accessories
1057	1057
1058		-* (((
1059		-(% style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1060		-)))
	1067	+* **E3**: External Temperature Probe
1061	1061
1062	1062	= 7. Packing Info =
1063	1063
1064		-(((
1065	1065	**Package Includes**:
1066		-)))
1067	1067
1068		-* (((
1069		-LHT65N Temperature & Humidity Sensor x 1
1070		-)))
1071		-* (((
1072		-Program cable x 1
1073		-)))
1074		-* (((
1075		-Optional external sensor
1076		-)))
	1073	+* LHT65N Temperature & Humidity Sensor x 1
	1074	+* Program cable x 1
	1075	+* Optional external sensor
1077	1077
1078		-(((
1079	1079	**Dimension and weight**:
1080		-)))
1081	1081
1082		-* (((
1083		-Device Size:  13.5 x 7 x 3 cm
1084		-)))
1085		-* (((
1086		-Device Weight: 105g
1087		-)))
1088		-* (((
1089		-Package Size / pcs : 14.5 x 8 x 5 cm
1090		-)))
1091		-* (((
1092		-Weight / pcs : 170g
1093		-)))
	1079	+* Device Size:  13.5 x 7 x 3 cm
	1080	+* Device Weight: 105g
	1081	+* Package Size / pcs : 14.5 x 8 x 5 cm
	1082	+* Weight / pcs : 170g
1094	1094
1095	1095	= 8. FCC Warning =
1096	1096
1097		-(((
1098	1098	This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1099		-)))
1100	1100
1101		-(((
1102	1102	(1) This device may not cause harmful interference；
1103		-)))
1104	1104
1105		-(((
1106	1106	(2) this device must accept any interference received, including interference that may cause undesired operation.
1107		-)))

image-20220523151052-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-8.6 KB

Content

image-20220523151132-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.6 KB

Content

image-20220523151218-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.8 KB

Content

image-20220523151253-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.5 KB

Content

image-20220523151336-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.6 KB

Content

image-20220523151411-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.5 KB

Content

image-20220523151450-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-38.4 KB

Content

image-20220523151524-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.2 KB

Content

image-20220523151556-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.7 KB

Content

image-20220523152208-14.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.2 KB

Content

image-20220523152302-15.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-4.3 KB

Content

image-20220523152434-16.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.3 KB

Content

image-20220523152822-17.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-7.4 KB

Content

image-20220523152839-18.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.7 KB

Content

image-20220523153201-19.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-27.9 KB

Content