Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 13 removed)
  • image-20220523151218-7.png
  • image-20220523151253-8.png
  • image-20220523151336-9.png
  • image-20220523151411-10.png
  • image-20220523151450-11.png
  • image-20220523151524-12.png
  • image-20220523151556-13.png
  • image-20220523152208-14.png
  • image-20220523152302-15.png
  • image-20220523152434-16.png
  • image-20220523152822-17.png
  • image-20220523152839-18.png
  • image-20220523153201-19.png

Details

Page properties

Content

...	...	@@ -132,7 +132,11 @@
132	132
133	133	[[image:image-20220515123819-1.png||height="379" width="317"]]
134	134
135		-[[image:image-20220523153201-19.png||height="163" width="739"]]
	135	+(% border="1" style="background-color:#ffffcc; color:green; width:739px" %)
	136	+|**Behavior on ACT**|**Function**|(% style="width:424px" %)**Action**
	137	+|**Pressing ACT between 1s < time < 3s**|Test uplink status|(% style="width:424px" %)If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
	138	+|**Pressing ACT for more than 3s**|Active Device|(% style="width:424px" %)green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
	139	+|**Fast press ACT 5 times**|Deactivate Device|(% style="width:424px" %)red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
136	136
137	137	== 2.3 Example to join LoRaWAN network ==
138	138
...	...	@@ -186,30 +186,35 @@
186	186
187	187	After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
188	188
189		-(% border="1" style="background-color:#ffffcc; color:green; width:426px" %)
190		-|(% style="width:97px" %)(((
	193	+
	194	+(% border="1" style="background-color:#ffffcc; color:green; width:428px" %)
	195	+|(% style="width:106px" %)(((
191	191	**Size(bytes)**
192		-)))|(% style="width:39px" %)(((
	197	+)))|(% style="width:46px" %)(((
193	193	**2**
194		-)))|(% style="width:100px" %)(((
	199	+)))|(% style="width:104px" %)(((
195	195	**2**
196		-)))|(% style="width:77px" %)(((
	201	+)))|(% style="width:80px" %)(((
197	197	**2**
198		-)))|(% style="width:47px" %)(((
199		-**1**
200	200	)))|(% style="width:51px" %)(((
	204	+**1**
	205	+)))|(% style="width:35px" %)(((
201	201	**4**
202	202	)))
203		-|(% style="width:97px" %)(((
	208	+|(% style="width:106px" %)(((
204	204	**Value**
205		-)))|(% style="width:39px" %)(((
	210	+)))|(% style="width:46px" %)(((
206	206	[[BAT>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.2BAT-BatteryInfo]]
207		-)))|(% style="width:100px" %)(((
	212	+)))|(% style="width:104px" %)(((
208	208	(((
209		-[[Built-In Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
	214	+[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
210	210	)))
211		-)))|(% style="width:77px" %)(((
	216	+
212	212	(((
	218	+[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
	219	+)))
	220	+)))|(% style="width:80px" %)(((
	221	+(((
213	213	[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
214	214	)))
215	215
...	...	@@ -216,9 +216,9 @@
216	216	(((
217	217	[[Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
218	218	)))
219		-)))|(% style="width:47px" %)(((
220		-[[Ext>>path:#Extension_Sensor]] #
221	221	)))|(% style="width:51px" %)(((
	229	+[[Ext>>path:#Extension_Sensor]] #
	230	+)))|(% style="width:35px" %)(((
222	222	[[Ext value>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
223	223	)))
224	224
...	...	@@ -240,8 +240,40 @@
240	240
241	241	These two bytes of BAT include the battery state and the actually voltage
242	242
243		-[[image:image-20220523152839-18.png]]
	252	+(% border="1" style="background-color:#ffffcc; color:green; width:502px" %)
	253	+|(% style="width:75px" %)(((
	254	+Bit(bit)
	255	+)))|(% style="width:259px" %)(((
	256	+[15:14]
	257	+)))|(% style="width:164px" %)(((
	258	+[13:0]
	259	+)))
	260	+|(% style="width:75px" %)(((
	261	+Value
	262	+)))|(% style="width:259px" %)(((
	263	+(((
	264	+BAT Status
	265	+)))
244	244
	267	+(((
	268	+00(b): Ultra Low ( BAT <= 2.50v)
	269	+)))
	270	+
	271	+(((
	272	+01(b): Low  (2.50v <=BAT <= 2.55v)
	273	+)))
	274	+
	275	+(((
	276	+10(b): OK   (2.55v <= BAT <=2.65v)
	277	+)))
	278	+
	279	+(((
	280	+11(b): Good   (BAT >= 2.65v)
	281	+)))
	282	+)))|(% style="width:164px" %)(((
	283	+Actually BAT voltage
	284	+)))
	285	+
245	245	[[image:image-20220522235639-1.png||height="139" width="727"]]
246	246
247	247	Check the battery voltage for LHT65N.
...	...	@@ -269,7 +269,10 @@
269	269
270	270	Bytes for External Sensor:
271	271
272		-[[image:image-20220523152822-17.png]]
	313	+(% border="1" style="background-color:#ffffcc; color:green; width:473px" %)
	314	+|(% style="width:139px" %)**EXT # Value**|(% style="width:331px" %)**External Sensor Type**
	315	+|(% style="width:139px" %)0x01|(% style="width:331px" %)Sensor E3, Temperature Sensor
	316	+|(% style="width:139px" %)0x09|(% style="width:331px" %)Sensor E3, Temperature Sensor, Datalog Mod
273	273
274	274	=== 2.4.6 Ext value ===
275	275
...	...	@@ -298,47 +298,21 @@
298	298
299	299	Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
300	300
301		-(% border="1" style="background-color:#ffffcc; color:green; width:468px" %)
302		-|(% style="width:96px" %)(((
303		-**Size(bytes)**
304		-)))|(% style="width:71px" %)(((
305		-**2**
306		-)))|(% style="width:99px" %)(((
307		-**2**
308		-)))|(% style="width:132px" %)(((
309		-**2**
310		-)))|(% style="width:54px" %)(((
311		-**1**
312		-)))|(% style="width:64px" %)(((
313		-**4**
314		-)))
315		-|(% style="width:96px" %)(((
316		-**Value**
317		-)))|(% style="width:71px" %)(((
318		-[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]
319		-)))|(% style="width:99px" %)(((
320		-(((
	345	+(% border="1" style="background-color:#ffffcc; color:green; width:541px" %)
	346	+|(% style="width:96px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:69px" %)**2**|(% style="width:88px" %)**2**|(% style="width:69px" %)**1**|(% style="width:85px" %)**4**
	347	+|(% style="width:96px" %)**Value**|(% style="width:71px" %)[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]|(% style="width:69px" %)(((
321	321	[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
322		-)))
323	323
324		-(((
325	325	[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
326		-)))
327		-)))|(% style="width:132px" %)(((
328		-(((
	351	+)))|(% style="width:88px" %)(((
329	329	BAT Status &
330		-)))
331	331
332		-(((
333		-[[Built-in Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
334		-)))
335		-)))|(% style="width:54px" %)(((
336		-Status & Ext
337		-)))|(% style="width:64px" %)(((
338		-(((
	354	+[[Built-in>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	355	+
	356	+[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	357	+)))|(% style="width:69px" %)Status & Ext|(% style="width:85px" %)(((
339	339	[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.1SetTransmitIntervalTime]]
340	340	)))
341		-)))
342	342
343	343	* **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**
344	344
...	...	@@ -362,7 +362,11 @@
362	362
363	363	* **Status & Ext Byte**
364	364
365		-[[image:image-20220523152434-16.png]]
	383	+(% border="1" style="background-color:#ffffcc; color:green; width:587px" %)
	384	+|(% style="width:109px" %)**Bits**|(% style="width:105px" %)**7**|(% style="width:105px" %)**6**|(% style="width:82px" %)**5**|(% style="width:84px" %)**4**|(% style="width:97px" %)**[3:0]**
	385	+|(% style="width:109px" %)**Status & Ext**|(% style="width:105px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:82px" %)Sync time OK|(% style="width:84px" %)Unix Time Request|(% style="width:97px" %)(((
	386	+Ext:0b(1001)
	387	+)))
366	366
367	367	* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
368	368	* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
...	...	@@ -458,8 +458,11 @@
458	458
459	459	User can poll sensor value based on timestamps from the server. Below is the downlink command.
460	460
461		-[[image:image-20220523152302-15.png]]
462	462
	484	+(% border="1" style="background-color:#ffffcc; color:green; width:427px" %)
	485	+|(% style="width:61px" %)1byte|(% style="width:126px" %)4bytes|(% style="width:120px" %)4bytes|(% style="width:115px" %)1byte
	486	+|(% style="width:61px" %)31|(% style="width:126px" %)Timestamp start|(% style="width:120px" %)Timestamp end|(% style="width:115px" %)Uplink Interval
	487	+
463	463	(((
464	464	Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
465	465	)))
...	...	@@ -485,138 +485,100 @@
485	485	**Retrieval data payload**
486	486	)))
487	487
488		-(% border="1" style="background-color:#ffffcc; color:green; width:469px" %)
	513	+(% border="1" style="background-color:#ffffcc; color:green; width:545px" %)
489	489	|(% style="width:93px" %)(((
490		-(((
491	491	**Size(bytes)**
492		-)))
493	493	)))|(% style="width:71px" %)(((
494		-(((
495	495	**2**
496		-)))
497	497	)))|(% style="width:102px" %)(((
498		-(((
499	499	**2**
500		-)))
501	501	)))|(% style="width:86px" %)(((
502		-(((
503	503	**2**
504		-)))
505		-)))|(% style="width:86px" %)(((
506		-(((
	522	+)))|(% style="width:90px" %)(((
507	507	**1**
508		-)))
509		-)))|(% style="width:48px" %)(((
510		-(((
	524	+)))|(% style="width:85px" %)(((
511	511	**4**
512	512	)))
513		-)))
514	514	|(% style="width:93px" %)(((
515		-(((
516	516	**Value**
517		-)))
518	518	)))|(% style="width:71px" %)(((
519		-(((
520	520	[[External sensor data>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
521		-)))
522	522	)))|(% style="width:102px" %)(((
523	523	(((
524		-(((
525	525	[[Built In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
526	526	)))
527		-)))
528	528
529	529	(((
530		-(((
531	531	[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
532	532	)))
533		-)))
534	534	)))|(% style="width:86px" %)(((
535	535	(((
536		-(((
537	537	[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
538	538	)))
539		-)))
540	540
541	541	(((
542		-(((
543	543	[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
544	544	)))
545		-)))
546		-)))|(% style="width:86px" %)(((
547		-(((
	547	+)))|(% style="width:90px" %)(((
548	548	[[Poll message flag & Ext>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.4DatalogUplinkpayload]]
549		-)))
550		-)))|(% style="width:48px" %)(((
	549	+)))|(% style="width:85px" %)(((
551	551	(((
552		-(((
553	553	[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.1UnixTimeStamp]]
554	554	)))
555		-)))
556	556
557	557	(((
558		-(((
559	559
560	560	)))
561	561	)))
562		-)))
563	563
564	564	**Poll message flag & Ext**
565	565
566		-[[image:image-20220523152208-14.png]]
	561	+(% border="1" style="background-color:#ffffcc; color:green; width:540px" %)
	562	+|(% style="width:81px" %)**Bits**|(% style="width:100px" %)**7**|(% style="width:105px" %)**6**|(% style="width:84px" %)**5**|(% style="width:85px" %)**4**|(% style="width:79px" %)**[3:0]**
	563	+|(% style="width:81px" %)**Status & Ext**|(% style="width:100px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:84px" %)Sync time OK|(% style="width:85px" %)Unix Time Request|(% style="width:79px" %)(((
	564	+(((
	565	+Ext:
	566	+)))
567	567
568	568	(((
	569	+0b(1001)
	570	+)))
	571	+)))
	572	+
569	569	(((
570	570	Poll Message Flag: 1: This message is a poll message reply.
571	571	)))
572		-)))
573	573
574	574	* (((
575		-(((
576	576	Poll Message Flag is set to 1.
577	577	)))
578		-)))
579	579	* (((
580		-(((
581	581	Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
582	582	)))
583		-)))
584	584
585	585	(((
586		-(((
587	587	For example, in US915 band, the max payload for different DR is:
588	588	)))
589		-)))
590	590
591	591	(((
592		-(((
593	593	a) DR0: max is 11 bytes so one entry of data
594	594	)))
595		-)))
596	596
597	597	(((
598		-(((
599	599	b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
600	600	)))
601		-)))
602	602
603	603	(((
604		-(((
605	605	c) DR2: total payload includes 11 entries of data
606	606	)))
607		-)))
608	608
609	609	(((
610		-(((
611	611	d) DR3: total payload includes 22 entries of data.
612	612	)))
613		-)))
614	614
615	615	(((
616		-(((
617	617	If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0
618	618	)))
619		-)))
620	620
621	621
622	622	**Example:**
...	...	@@ -625,25 +625,14 @@
625	625
626	626	[[image:image-20220523144455-1.png||height="335" width="735"]]
627	627
628		-(((
629	629	If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705
630		-)))
631	631
632		-(((
633	633	Where : Start time: 60065F97 = time 21/1/19 04:27:03
634		-)))
635	635
636		-(((
637	637	Stop time 60066DA7= time 21/1/19 05:27:03
638		-)))
639	639
640		-(((
641		-
642		-)))
643	643
644		-(((
645	645	LHT65N will uplink this payload.
646		-)))
647	647
648	648	[[image:image-20220523001219-13.png||height="421" width="727"]]
649	649
...	...	@@ -667,27 +667,19 @@
667	667
668	668	Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
669	669
670		-(((
671	671	(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
672		-)))
673	673
674		-(((
675	675	**AT Commands for Alarm mode:**
676		-)))
677	677
678	678	(% class="box infomessage" %)
679	679	(((
680		-(((
681	681	**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)
682	682	)))
683		-)))
684	684
685	685	(% class="box infomessage" %)
686	686	(((
687		-(((
688	688	**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
689	689	)))
690		-)))
691	691
692	692	== 2.8 LED Indicator ==
693	693
...	...	@@ -740,55 +740,29 @@
740	740
741	741	= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
742	742
743		-(((
744	744	Use can configure LHT65N via AT Command or LoRaWAN Downlink.
745		-)))
746	746
747		-* (((
748		-AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
749		-)))
750		-* (((
751		-LoRaWAN Downlink instruction for different platforms:
752		-)))
	713	+* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
	714	+* LoRaWAN Downlink instruction for different platforms:
753	753
754		-(((
755	755	[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
756		-)))
757	757
758		-(((
759	759	There are two kinds of commands to configure LHT65N, they are:
760		-)))
761	761
762		-(((
763	763	(% style="color:#4f81bd" %)* **General Commands**.
764		-)))
765	765
766		-(((
767	767	These commands are to configure:
768		-)))
769	769
770		-* (((
771		-General system settings like: uplink interval.
772		-)))
773		-* (((
774		-LoRaWAN protocol & radio-related commands.
775		-)))
	724	+* General system settings like: uplink interval.
	725	+* LoRaWAN protocol & radio-related commands.
776	776
777		-(((
778	778	They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
779		-)))
780	780
781		-(((
782	782	[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
783		-)))
784	784
785		-(((
786	786	(% style="color:#4f81bd" %)* **Commands special design for LHT65N**
787		-)))
788	788
789		-(((
790	790	These commands are only valid for LHT65N, as below:
791		-)))
792	792
793	793	== 4.1 Set Transmit Interval Time ==
794	794
...	...	@@ -796,8 +796,21 @@
796	796
797	797	**AT Command: AT+TDC**
798	798
799		-[[image:image-20220523150701-2.png]]
	741	+(% border="1" %)
	742	+|**Command Example**|**Function**|**Response**
	743	+|AT+TDC?|Show current transmit Interval|(((
	744	+30000
800	800
	746	+OK
	747	+
	748	+the interval is 30000ms = 30s
	749	+)))
	750	+|AT+TDC=60000|Set Transmit Interval|(((
	751	+OK
	752	+
	753	+Set transmit interval to 60000ms = 60 seconds
	754	+)))
	755	+
801	801	**Downlink Command: 0x01**
802	802
803	803	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -804,8 +804,8 @@
804	804
805	805	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
806	806
807		-* **Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
808		-* **Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	762	+* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	763	+* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
809	809
810	810	== 4.2 Set External Sensor Mode ==
811	811
...	...	@@ -813,13 +813,23 @@
813	813
814	814	**AT Command: AT+EXT**
815	815
816		-[[image:image-20220523150759-3.png]]
	771	+(% border="1" %)
	772	+|**Command Example**|**Function**|**Response**
	773	+|AT+EXT?|Get current external sensor mode|(((
	774	+1
817	817
	776	+OK
	777	+
	778	+External Sensor mode =1
	779	+)))
	780	+|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1
	781	+|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp
	782	+
818	818	**Downlink Command: 0xA2**
819	819
820	820	Total bytes: 2 ~~ 5 bytes
821	821
822		-**Example:**
	787	+Example:
823	823
824	824	* 0xA201: Set external sensor type to E1
825	825	* 0xA209: Same as AT+EXT=9
...	...	@@ -834,14 +834,17 @@
834	834
835	835	PID is default set to disable (0)
836	836
	802	+
837	837	**AT Command:**
838	838
839		-[[image:image-20220523150928-4.png]]
	805	+(% border="1" %)
	806	+|**Command Example**|**Function**|**Response**
	807	+|AT+PID=1|Enable PID uplink|OK
840	840
841	841	**Downlink Command:**
842	842
843		-* 0xA800  **~-~->** AT+PID=0
844		-* 0xA801     **~-~->** AT+PID=1
	811	+* 0xA800     à AT+PID=0
	812	+* 0xA801     à AT+PID=1
845	845
846	846	== 4.4 Set Password ==
847	847
...	...	@@ -849,8 +849,16 @@
849	849
850	850	**AT Command: AT+PWORD**
851	851
852		-[[image:image-20220523151052-5.png]]
	820	+(% border="1" %)
	821	+|**Command Example**|**Function**|**Response**
	822	+|AT+PWORD=?|Show password|(((
	823	+123456
853	853
	825	+
	826	+OK
	827	+)))
	828	+|AT+PWORD=999999|Set password|OK
	829	+
854	854	**Downlink Command:**
855	855
856	856	No downlink command for this feature.
...	...	@@ -861,12 +861,15 @@
861	861
862	862	**AT Command: AT+DISAT**
863	863
864		-[[image:image-20220523151132-6.png]]
	840	+(% border="1" %)
	841	+|**Command Example**|**Function**|**Response**
	842	+|AT+DISAT|Quit AT Commands mode|OK
865	865
866	866	**Downlink Command:**
867	867
868	868	No downlink command for this feature.
869	869
	848	+
870	870	== 4.6 Set to sleep mode ==
871	871
872	872	Feature: Set device to sleep mode
...	...	@@ -873,8 +873,15 @@
873	873
874	874	**AT Command: AT+SLEEP**
875	875
876		-[[image:image-20220523151218-7.png]]
	855	+(% border="1" %)
	856	+| | |
	857	+|**Command Example**|**Function**|**Response**
	858	+|AT+SLEEP|Set to sleep mode|(((
	859	+Clear all stored sensor data…
877	877
	861	+OK
	862	+)))
	863	+
878	878	**Downlink Command:**
879	879
880	880	* There is no downlink command to set to Sleep mode.
...	...	@@ -885,8 +885,14 @@
885	885
886	886	**AT Command:**
887	887
888		-[[image:image-20220523151253-8.png]]
	874	+(% border="1" %)
	875	+|**Command Example**|**Function**
	876	+|AT+TIMESTAMP=1611104352|(((
	877	+OK
889	889
	879	+Set System time to 2021-01-20 00:59:12
	880	+)))
	881	+
890	890	**Downlink Command:**
891	891
892	892	0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
...	...	@@ -897,9 +897,11 @@
897	897
898	898	SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
899	899
	892	+
900	900	**AT Command:**
901	901
902		-[[image:image-20220523151336-9.png]]
	895	+|**Command Example**|**Function**
	896	+|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)
903	903
904	904	**Downlink Command:**
905	905
...	...	@@ -913,7 +913,9 @@
913	913
914	914	**AT Command:**
915	915
916		-[[image:image-20220523151411-10.png]]
	910	+(% border="1" %)
	911	+|**Command Example**|**Function**
	912	+|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
917	917
918	918	**Downlink Command:**
919	919
...	...	@@ -925,8 +925,51 @@
925	925
926	926	**AT Command: AT+PDTA**
927	927
928		-[[image:image-20220523151450-11.png]]
	924	+(% border="1" %)
	925	+|**Command Example**|**Response**
	926	+|(((
	927	+AT+PDTA=1,3
929	929
	929	+
	930	+
	931	+Print page 1 to 3
	932	+)))|(((
	933	+8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31
	934	+
	935	+8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93
	936	+
	937	+8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06
	938	+
	939	+8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12
	940	+
	941	+8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06
	942	+
	943	+8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68
	944	+
	945	+8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56
	946	+
	947	+8019570
	948	+
	949	+8019580
	950	+
	951	+8019590
	952	+
	953	+80195A0
	954	+
	955	+80195B0
	956	+
	957	+80195C0
	958	+
	959	+80195D0
	960	+
	961	+80195E0
	962	+
	963	+80195F0
	964	+
	965	+
	966	+OK
	967	+)))
	968	+
930	930	**Downlink Command:**
931	931
932	932	No downlink commands for feature
...	...	@@ -937,8 +937,32 @@
937	937
938	938	**AT Command: AT+PLDTA**
939	939
940		-[[image:image-20220523151524-12.png]]
	979	+(% border="1" %)
	980	+|**Command Example**|**Response**
	981	+|(((
	982	+AT+PLDTA=5
941	941
	984	+
	985	+
	986	+Print last 5 entries
	987	+)))|(((
	988	+Stop Tx and RTP events when read sensor data
	989	+
	990	+1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75
	991	+
	992	+2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43
	993	+
	994	+3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56
	995	+
	996	+4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75
	997	+
	998	+5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43
	999	+
	1000	+Start Tx and RTP events
	1001	+
	1002	+OK
	1003	+)))
	1004	+
942	942	**Downlink Command:**
943	943
944	944	No downlink commands for feature
...	...	@@ -949,8 +949,14 @@
949	949
950	950	**AT Command: AT+CLRDTA**
951	951
952		-[[image:image-20220523151556-13.png]]
	1015	+(% border="1" %)
	1016	+|**Command Example**|**Function**|**Response**
	1017	+|AT+CLRDTA|Clear date record|(((
	1018	+Clear all stored sensor data…
953	953
	1020	+OK
	1021	+)))
	1022	+
954	954	**Downlink Command: 0xA3**
955	955
956	956	* Example: 0xA301 ~/~/Same as AT+CLRDTA
...	...	@@ -961,15 +961,11 @@
961	961
962	962	LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
963	963
964		-(((
965	965	The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
966	966	[[image:image-20220515075034-1.png||height="208" width="644"]]
967		-)))
968	968
969		-(((
970	970	The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
971	971
972		-)))
973	973
974	974	== 5.2 Replace Battery ==
975	975
...	...	@@ -979,97 +979,47 @@
979	979
980	980	== 5.3 Battery Life Analyze ==
981	981
982		-(((
983	983	Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
984	984	https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
985		-)))
986	986
987	987	= 6. Order Info =
988	988
989		-(((
990		-Part Number: (% style="color:#4f81bd" %)** LHT65N-XX**
991		-)))
	1052	+Part Number: (% class="mark" %)**LHT65N-XX**
992	992
993		-(((
994		-(% style="color:#4f81bd" %)**XX **(%%): The default frequency band
995		-)))
	1054	+**XX**: The default frequency band
996	996
997		-* (((
998		-(% style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
999		-)))
1000		-* (((
1001		-(% style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1002		-)))
1003		-* (((
1004		-(% style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1005		-)))
1006		-* (((
1007		-(% style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1008		-)))
1009		-* (((
1010		-(% style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1011		-)))
1012		-* (((
1013		-(% style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1014		-)))
1015		-* (((
1016		-(% style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1017		-)))
1018		-* (((
1019		-(% style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1020		-)))
	1056	+* **AS923**: LoRaWAN AS923 band
	1057	+* **AU915**: LoRaWAN AU915 band
	1058	+* **EU433**: LoRaWAN EU433 band
	1059	+* **EU868**: LoRaWAN EU868 band
	1060	+* **KR920**: LoRaWAN KR920 band
	1061	+* **US915**: LoRaWAN US915 band
	1062	+* **IN865**: LoRaWAN IN865 band
	1063	+* **CN470**: LoRaWAN CN470 band
1021	1021
1022		-(((
1023		-(% style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1024		-)))
	1065	+**YY**: Sensor Accessories
1025	1025
1026		-* (((
1027		-(% style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1028		-)))
	1067	+* **E3**: External Temperature Probe
1029	1029
1030	1030	= 7. Packing Info =
1031	1031
1032		-(((
1033	1033	**Package Includes**:
1034		-)))
1035	1035
1036		-* (((
1037		-LHT65N Temperature & Humidity Sensor x 1
1038		-)))
1039		-* (((
1040		-Program cable x 1
1041		-)))
1042		-* (((
1043		-Optional external sensor
1044		-)))
	1073	+* LHT65N Temperature & Humidity Sensor x 1
	1074	+* Program cable x 1
	1075	+* Optional external sensor
1045	1045
1046		-(((
1047	1047	**Dimension and weight**:
1048		-)))
1049	1049
1050		-* (((
1051		-Device Size:  13.5 x 7 x 3 cm
1052		-)))
1053		-* (((
1054		-Device Weight: 105g
1055		-)))
1056		-* (((
1057		-Package Size / pcs : 14.5 x 8 x 5 cm
1058		-)))
1059		-* (((
1060		-Weight / pcs : 170g
1061		-)))
	1079	+* Device Size:  13.5 x 7 x 3 cm
	1080	+* Device Weight: 105g
	1081	+* Package Size / pcs : 14.5 x 8 x 5 cm
	1082	+* Weight / pcs : 170g
1062	1062
1063	1063	= 8. FCC Warning =
1064	1064
1065		-(((
1066	1066	This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1067		-)))
1068	1068
1069		-(((
1070	1070	(1) This device may not cause harmful interference；
1071		-)))
1072	1072
1073		-(((
1074	1074	(2) this device must accept any interference received, including interference that may cause undesired operation.
1075		-)))

image-20220523151218-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.8 KB

Content

image-20220523151253-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.5 KB

Content

image-20220523151336-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.6 KB

Content

image-20220523151411-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.5 KB

Content

image-20220523151450-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-38.4 KB

Content

image-20220523151524-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.2 KB

Content

image-20220523151556-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.7 KB

Content

image-20220523152208-14.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.2 KB

Content

image-20220523152302-15.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-4.3 KB

Content

image-20220523152434-16.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.3 KB

Content

image-20220523152822-17.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-7.4 KB

Content

image-20220523152839-18.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.7 KB

Content

image-20220523153201-19.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-27.9 KB

Content