Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 16 removed)
  • image-20220523111447-1.jpeg
  • image-20220523112300-2.png
  • image-20220523115324-1.jpeg
  • image-20220523144455-1.png
  • image-20220523150701-2.png
  • image-20220523150759-3.png
  • image-20220523150928-4.png
  • image-20220523151052-5.png
  • image-20220523151132-6.png
  • image-20220523151218-7.png
  • image-20220523151253-8.png
  • image-20220523151336-9.png
  • image-20220523151411-10.png
  • image-20220523151450-11.png
  • image-20220523151524-12.png
  • image-20220523151556-13.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Xiaoling
	1	+XWiki.Edwin

Content

...	...	@@ -1,47 +1,27 @@
1		-(% style="text-align:center" %)
2		-[[image:image-20220523115324-1.jpeg||height="500" width="500"]]
3		-
4		-
5		-**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
6		-
7		-
8		-
9		-**Table of Contents：**
10		-
	1	+{{box cssClass="floatinginfobox" title="**Contents**"}}
11	11	{{toc/}}
	3	+{{/box}}
12	12
	5	+= Overview =
13	13
	7	+[[image:LHT65N_10.png||alt="LHT65_Image" height="265" width="265"]]
14	14
15		-= 1.Introduction =
16	16
17		-== 1.1 What is LHT65N Temperature & Humidity Sensor ==
	10	+The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a(% class="mark" %) **built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% class="mark" %)**Temperature Sensor**(%%)**.**
18	18
19		-(((
20		-The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% style="color:#4f81bd" %)**Temperature Sensor**(%%)**.**
21		-)))
22		-
23		-(((
24	24	The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
25		-)))
26	26
27		-(((
28	28	LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
29		-)))
30	30
31		-(((
32	32	LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
33		-)))
34	34
35		-(((
36		-LHT65N supports (% style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
37		-)))
	18	+LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
38	38
39		-(((
40	40	*The actual battery life depends on how often to send data, please see the battery analyzer chapter.
41		-)))
42	42
43		-== 1.2 Features ==
44	44
	23	+== Features: ==
	24	+
45	45	* Wall mountable
46	46	* LoRaWAN v1.0.3 Class A protocol
47	47	* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
...	...	@@ -54,91 +54,55 @@
54	54	* Tri-color LED to indicate working status
55	55	* Datalog feature
56	56
57		-== 1.3 Specification ==
	37	+== Specification: ==
58	58
59		-(((
60	60	**Built-in Temperature Sensor:**
61		-)))
62	62
63		-* (((
64		-Resolution: 0.01 °C
65		-)))
66		-* (((
67		-Accuracy Tolerance : Typ ±0.3 °C
68		-)))
69		-* (((
70		-Long Term Drift: < 0.02 °C/yr
71		-)))
72		-* (((
73		-Operating Range: -40 ~~ 85 °C
74		-)))
	41	+* Resolution: 0.01 °C
	42	+* Accuracy Tolerance : Typ ±0.3 °C
	43	+* Long Term Drift: < 0.02 °C/yr
	44	+* Operating Range: -40 ~~ 85 °C
75	75
76		-(((
77	77	**Built-in Humidity Sensor:**
78		-)))
79	79
80		-* (((
81		-Resolution: 0.04 %RH
82		-)))
83		-* (((
84		-Accuracy Tolerance : Typ ±3 %RH
85		-)))
86		-* (((
87		-Long Term Drift: < 0.02 °C/yr
88		-)))
89		-* (((
90		-Operating Range: 0 ~~ 96 %RH
91		-)))
	48	+* Resolution: 0.04 %RH
	49	+* Accuracy Tolerance : Typ ±3 %RH
	50	+* Long Term Drift: < 0.02 °C/yr
	51	+* Operating Range: 0 ~~ 96 %RH
92	92
93		-(((
94	94	**External Temperature Sensor:**
95		-)))
96	96
97		-* (((
98		-Resolution: 0.0625 °C
99		-)))
100		-* (((
101		-±0.5°C accuracy from -10°C to +85°C
102		-)))
103		-* (((
104		-±2°C accuracy from -55°C to +125°C
105		-)))
106		-* (((
107		-Operating Range: -55 °C ~~ 125 °C
108		-)))
	55	+* Resolution: 0.0625 °C
	56	+* ±0.5°C accuracy from -10°C to +85°C
	57	+* ±2°C accuracy from -55°C to +125°C
	58	+* Operating Range: -55 °C ~~ 125 °C
109	109
110		-= 2. Connect LHT65N to IoT Server =
	60	+= Connect LHT65N to IoT Server =
111	111
112		-== 2.1 How does LHT65N work? ==
	62	+== How does LHT65N work? ==
113	113
114		-(((
115	115	LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
116		-)))
117	117
118		-(((
119	119	If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
120		-)))
121	121
122		-== 2.2 How to Activate LHT65N? ==
123	123
	69	+== How to Activate LHT65N? ==
	70	+
124	124	The LHT65N has two working modes:
125	125
126	126	* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
127	127	* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.
128	128
129		-(((
130	130	The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
131		-)))
132	132
133	133	[[image:image-20220515123819-1.png||height="379" width="317"]]
134	134
135		-(% border="1" style="background-color:#ffffcc; color:green; width:739px" %)
136		-|**Behavior on ACT**|**Function**|(% style="width:424px" %)**Action**
137		-|**Pressing ACT between 1s < time < 3s**|Test uplink status|(% style="width:424px" %)If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
138		-|**Pressing ACT for more than 3s**|Active Device|(% style="width:424px" %)green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
139		-|**Fast press ACT 5 times**|Deactivate Device|(% style="width:424px" %)red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
	80	+|**Behavior on ACT**|**Function**|**Action**
	81	+|**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
	82	+|**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
	83	+|**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
140	140
141		-== 2.3 Example to join LoRaWAN network ==
	85	+== Example to join LoRaWAN network ==
142	142
143	143	(% class="wikigeneratedid" %)
144	144	This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
...	...	@@ -149,7 +149,7 @@
149	149	Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
150	150
151	151
152		-=== 2.3.1 Step 1: Create Device n TTN ===
	96	+=== **Step 1**: Create Device n TTN ===
153	153
154	154	Create a device in TTN V3 with the OTAA keys from LHT65N.
155	155
...	...	@@ -163,8 +163,10 @@
163	163
164	164	[[image:image-20220522232916-3.png]]
165	165
	110	+
166	166	[[image:image-20220522232932-4.png]]
167	167
	113	+
168	168	[[image:image-20220522232954-5.png]]
169	169
170	170	Note: LHT65N use same payload as LHT65.
...	...	@@ -177,65 +177,37 @@
177	177	[[image:image-20220522233118-7.png]]
178	178
179	179
180		-=== 2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===
	126	+=== Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===
181	181
182	182	Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
183	183
184		-[[image:image-20220522233300-8.png||height="219" width="722"]]
	130	+[[image:image-20220522233300-8.png]]
185	185
186	186
187		-== 2.4 Uplink Payload ==
	133	+== Uplink Payload: ==
188	188
189		-The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
	135	+The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and(% class="mark" %) every 20 minutes(%%) send one uplink by default.
190	190
191		-After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
	137	+After each uplink, the (% class="mark" %)BLUE LED(%%) will blink once.
192	192
193	193
194		-(% border="1" style="background-color:#ffffcc; color:green; width:428px" %)
195		-|(% style="width:106px" %)(((
196		-**Size(bytes)**
197		-)))|(% style="width:46px" %)(((
198		-**2**
199		-)))|(% style="width:104px" %)(((
200		-**2**
201		-)))|(% style="width:80px" %)(((
202		-**2**
203		-)))|(% style="width:51px" %)(((
204		-**1**
205		-)))|(% style="width:35px" %)(((
206		-**4**
207		-)))
208		-|(% style="width:106px" %)(((
209		-**Value**
210		-)))|(% style="width:46px" %)(((
211		-[[BAT>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.2BAT-BatteryInfo]]
212		-)))|(% style="width:104px" %)(((
213		-(((
214		-[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
215		-)))
	140	+(% style="width:572px" %)
	141	+|(% style="width:106px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:128px" %)**2**|(% style="width:103px" %)**2**|(% style="width:72px" %)**1**|(% style="width:89px" %)**4**
	142	+|(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:#Battery]]|(% style="width:128px" %)(((
	143	+[[Built-In>>path:#SHT20_Temperature]]
216	216
217		-(((
218		-[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
219		-)))
220		-)))|(% style="width:80px" %)(((
221		-(((
222		-[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
223		-)))
	145	+[[Temperature>>path:#SHT20_Temperature]]
	146	+)))|(% style="width:103px" %)(((
	147	+[[Built-in>>path:#SHT20_Humidity]]
224	224
225		-(((
226		-[[Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
227		-)))
228		-)))|(% style="width:51px" %)(((
229		-[[Ext>>path:#Extension_Sensor]] #
230		-)))|(% style="width:35px" %)(((
231		-[[Ext value>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
232		-)))
	149	+[[Humidity>>path:#SHT20_Humidity]]
	150	+)))|(% style="width:72px" %)[[Ext>>path:#Extension_Sensor]] #|(% style="width:89px" %)[[Ext value>>path:#Extension_sensor_value]]
233	233
234	234	* The First 6 bytes: has fix meanings for every LHT65N.
235	235	* The 7th byte (EXT #): defines the external sensor model.
236	236	* The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
237	237
238		-=== 2.4.1 Decoder in TTN V3 ===
	156	+=== Decoder in TTN V3 ===
239	239
240	240	When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
241	241
...	...	@@ -243,47 +243,28 @@
243	243
244	244	[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
245	245
246		-[[image:image-20220522234118-10.png||height="353" width="729"]]
	164	+[[image:image-20220522234118-10.png]]
247	247
248		-=== 2.4.2 BAT-Battery Info ===
249	249
	167	+=== BAT-Battery Info ===
	168	+
250	250	These two bytes of BAT include the battery state and the actually voltage
251	251
252		-(% border="1" style="background-color:#ffffcc; color:green; width:502px" %)
253		-|(% style="width:75px" %)(((
254		-Bit(bit)
255		-)))|(% style="width:259px" %)(((
256		-[15:14]
257		-)))|(% style="width:164px" %)(((
258		-[13:0]
259		-)))
260		-|(% style="width:75px" %)(((
261		-Value
262		-)))|(% style="width:259px" %)(((
263		-(((
	171	+(% style="width:646px" %)
	172	+|Bit(bit)|(% style="width:272px" %)[15:14]|(% style="width:214px" %)[13:0]
	173	+|Value|(% style="width:272px" %)(((
264	264	BAT Status
265		-)))
266	266
267		-(((
268	268	00(b): Ultra Low ( BAT <= 2.50v)
269		-)))
270	270
271		-(((
272	272	01(b): Low  (2.50v <=BAT <= 2.55v)
273		-)))
274	274
275		-(((
276	276	10(b): OK   (2.55v <= BAT <=2.65v)
277		-)))
278	278
279		-(((
280	280	11(b): Good   (BAT >= 2.65v)
281		-)))
282		-)))|(% style="width:164px" %)(((
283		-Actually BAT voltage
284		-)))
	183	+)))|(% style="width:214px" %)Actually BAT voltage
285	285
286		-[[image:image-20220522235639-1.png||height="139" width="727"]]
	185	+[[image:image-20220522235639-1.png]]
287	287
288	288	Check the battery voltage for LHT65N.
289	289
...	...	@@ -290,9 +290,9 @@
290	290	* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
291	291	* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
292	292
293		-=== 2.4.3 Built-in Temperature ===
	192	+=== Built-in Temperature ===
294	294
295		-[[image:image-20220522235639-2.png||height="138" width="722"]]
	194	+[[image:image-20220522235639-2.png]]
296	296
297	297	* Temperature:  0x0ABB/100=27.47℃
298	298
...	...	@@ -300,69 +300,72 @@
300	300
301	301	* Temperature:  (0xF5C6-65536)/100=-26.18℃
302	302
303		-=== 2.4.4 Built-in Humidity ===
	202	+=== Built-in Humidity ===
304	304
305		-[[image:image-20220522235639-4.png||height="138" width="722"]]
	204	+[[image:image-20220522235639-4.png]]
306	306
307	307	* Humidity:    0x025C/10=60.4%
308	308
309		-=== 2.4.5 Ext # ===
	208	+=== Ext # ===
310	310
311	311	Bytes for External Sensor:
312	312
313		-(% border="1" style="background-color:#ffffcc; color:green; width:473px" %)
314		-|(% style="width:139px" %)**EXT # Value**|(% style="width:331px" %)**External Sensor Type**
315		-|(% style="width:139px" %)0x01|(% style="width:331px" %)Sensor E3, Temperature Sensor
316		-|(% style="width:139px" %)0x09|(% style="width:331px" %)Sensor E3, Temperature Sensor, Datalog Mod
	212	+(% style="width:624px" %)
	213	+|(% style="width:139px" %)**EXT # Value**|(% style="width:484px" %)**External Sensor Type**
	214	+|(% style="width:139px" %)0x01|(% style="width:484px" %)Sensor E3, Temperature Sensor
	215	+|(% style="width:139px" %)0x09|(% style="width:484px" %)Sensor E3, Temperature Sensor, Datalog Mod
317	317
318		-=== 2.4.6 Ext value ===
	217	+=== Ext value ===
319	319
320		-==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====
	219	+==== Ext~=1, E3 Temperature Sensor ====
321	321
322	322	[[image:image-20220522235639-5.png]]
323	323
	223	+
324	324	* DS18B20 temp=0x0ADD/100=27.81℃
325	325
326	326	The last 2 bytes of data are meaningless
327	327
	228	+
	229	+
328	328	[[image:image-20220522235639-6.png]]
329	329
330	330	* External temperature= (0xF54F-65536)/100=-27.37℃
331	331
332		-(((
333	333	The last 2 bytes of data are meaningless
334		-)))
335	335
336		-(((
	236	+
337	337	If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
338		-)))
339	339
340	340
341		-==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====
	240	+==== Ext~=9, E3 sensor with Unix Timestamp ====
342	342
343	343	Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
344	344
345		-(% border="1" style="background-color:#ffffcc; color:green; width:541px" %)
346		-|(% style="width:96px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:69px" %)**2**|(% style="width:88px" %)**2**|(% style="width:69px" %)**1**|(% style="width:85px" %)**4**
347		-|(% style="width:96px" %)**Value**|(% style="width:71px" %)[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]|(% style="width:69px" %)(((
348		-[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
349	349
350		-[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
351		-)))|(% style="width:88px" %)(((
352		-BAT Status &
	245	+(% style="width:697px" %)
	246	+|(% style="width:96px" %)**Size(bytes)**|(% style="width:164px" %)**2**|(% style="width:104px" %)**2**|(% style="width:106px" %)**2**|(% style="width:108px" %)**1**|(% style="width:116px" %)**4**
	247	+|(% style="width:96px" %)**Value**|(% style="width:164px" %)[[External temperature>>path:#DS18b20_value]]|(% style="width:104px" %)(((
	248	+[[Built-In>>path:#SHT20_Temperature]]
353	353
354		-[[Built-in>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	250	+[[Temperature>>path:#SHT20_Temperature]]
	251	+)))|(% style="width:106px" %)(((
	252	+[[BAT Status &>>path:#BAT_Humidity]]
355	355
356		-[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
357		-)))|(% style="width:69px" %)Status & Ext|(% style="width:85px" %)(((
358		-[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.1SetTransmitIntervalTime]]
	254	+[[Built-in>>path:#BAT_Humidity]]
	255	+
	256	+[[Humidity>>path:#BAT_Humidity]]
	257	+)))|(% style="width:108px" %)[[Status & Ext>>path:#Status_EXT]]|(% style="width:116px" %)(((
	258	+[[Unix>>path:#Unix_Time_Stamp]]
	259	+
	260	+[[Time Stamp>>path:#Unix_Time_Stamp]]
359	359	)))
360	360
361		-* **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**
	263	+* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]
362	362
363		-(% border="1" style="background-color:#ffffcc; color:green; width:469px" %)
364		-|(% style="width:65px" %)Bit(bit)|(% style="width:267px" %)[15:14]|(% style="width:134px" %)[11:0]
365		-|(% style="width:65px" %)Value|(% style="width:267px" %)(((
	265	+(% style="width:587px" %)
	266	+|Bit(bit)|(% style="width:280px" %)[15:14]|(% style="width:136px" %)[11:0]
	267	+|Value|(% style="width:280px" %)(((
366	366	BAT Status
367	367
368	368	00(b): Ultra Low ( BAT <= 2.50v)
...	...	@@ -372,8 +372,8 @@
372	372	10(b): OK   (2.55v <= BAT <=2.65v)
373	373
374	374	11(b): Good   (BAT >= 2.65v)
375		-)))|(% style="width:134px" %)(((
376		-[[Built-in Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
	277	+)))|(% style="width:136px" %)(((
	278	+[[Built-in Humidity>>path:#SHT20_Humidity]]
377	377
378	378
379	379	)))
...	...	@@ -380,10 +380,12 @@
380	380
381	381	* **Status & Ext Byte**
382	382
383		-(% border="1" style="background-color:#ffffcc; color:green; width:587px" %)
384		-|(% style="width:109px" %)**Bits**|(% style="width:105px" %)**7**|(% style="width:105px" %)**6**|(% style="width:82px" %)**5**|(% style="width:84px" %)**4**|(% style="width:97px" %)**[3:0]**
385		-|(% style="width:109px" %)**Status & Ext**|(% style="width:105px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:82px" %)Sync time OK|(% style="width:84px" %)Unix Time Request|(% style="width:97px" %)(((
386		-Ext:0b(1001)
	285	+(% style="width:732px" %)
	286	+|(% style="width:128px" %)**Bits**|(% style="width:102px" %)**7**|(% style="width:145px" %)**6**|(% style="width:117px" %)**5**|(% style="width:147px" %)**4**|(% style="width:90px" %)**[3:0]**
	287	+|(% style="width:128px" %)**Status & Ext**|(% style="width:102px" %)Not Defined|(% style="width:145px" %)Poll Message Flag|(% style="width:117px" %)Sync time OK|(% style="width:147px" %)Unix Time Request|(% style="width:90px" %)(((
	288	+Ext:
	289	+
	290	+0b(1001)
387	387	)))
388	388
389	389	* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
...	...	@@ -390,21 +390,17 @@
390	390	* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
391	391	* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
392	392
393		-== 2.5 Show data on Datacake ==
	297	+== Show data on Datacake ==
394	394
395	395	Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
396	396
397		-(((
	301	+
398	398	**Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.
399		-)))
400	400
401		-(((
402	402	**Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
403		-)))
404	404
405		-(((
	306	+
406	406	Add Datacake:
407		-)))
408	408
409	409	[[image:image-20220523000825-7.png||height="262" width="583"]]
410	410
...	...	@@ -413,17 +413,21 @@
413	413
414	414	[[image:image-20220523000825-8.png||height="453" width="406"]]
415	415
	316	+
416	416	In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT65 device.
417	417
418	418	[[image:image-20220523000825-9.png||height="366" width="392"]]
419	419
420		-[[image:image-20220523000825-10.png||height="413" width="728"]]
421	421
422		-== 2.6 Datalog Feature ==
423	423
	323	+[[image:image-20220523000825-10.png||height="432" width="762"]]
	324	+
	325	+
	326	+== Datalog Feature ==
	327	+
424	424	This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.
425	425
426		-=== 2.6.1 Unix TimeStamp ===
	330	+=== Unix TimeStamp ===
427	427
428	428	LHT65N uses Unix TimeStamp format based on
429	429
...	...	@@ -430,180 +430,100 @@
430	430	[[image:image-20220523001219-11.png||height="97" width="627"]]
431	431
432	432
433		-(((
434	434	User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
435		-)))
436	436
437		-(((
438	438	Below is the converter example
439		-)))
440	440
441		-[[image:image-20220523001219-12.png||height="298" width="720"]]
	341	+[[image:image-20220523001219-12.png||height="353" width="853"]]
442	442
443	443	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
444	444
445		-=== 2.6.2 Set Device Time ===
446	446
447		-(((
	346	+=== Set Device Time ===
	347	+
448	448	There are two ways to set device’s time:
449		-)))
450	450
451		-(((
452	452	**~1. Through LoRaWAN MAC Command (Default settings)**
453		-)))
454	454
455		-(((
456	456	User need to set SYNCMOD=1 to enable sync time via MAC command.
457		-)))
458	458
459		-(((
460	460	Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
461		-)))
462	462
463		-(((
464	464	Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
465		-)))
466	466
467		-(((
468		-
469		-)))
470	470
471		-(((
472	472	**2. Manually Set Time**
473		-)))
474	474
475		-(((
476	476	User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
477		-)))
478	478
479		-=== 2.6.3 Poll sensor value ===
480	480
	364	+=== Poll sensor value ===
	365	+
481	481	User can poll sensor value based on timestamps from the server. Below is the downlink command.
482	482
483	483
484		-(% border="1" style="background-color:#ffffcc; color:green; width:427px" %)
485		-|(% style="width:61px" %)1byte|(% style="width:126px" %)4bytes|(% style="width:120px" %)4bytes|(% style="width:115px" %)1byte
486		-|(% style="width:61px" %)31|(% style="width:126px" %)Timestamp start|(% style="width:120px" %)Timestamp end|(% style="width:115px" %)Uplink Interval
	369	+(% style="width:454px" %)
	370	+|(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte
	371	+|(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval
487	487
488		-(((
489	489	Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
490		-)))
491	491
492		-(((
493		-For example, downlink command **31 5FC5F350 5FC6 0160 05**
494		-)))
495	495
496		-(((
	376	+For example, downlink command 31 5FC5F350 5FC6 0160 05
	377	+
497	497	Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
498		-)))
499	499
500		-(((
501	501	Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
502		-)))
503	503
504	504
505		-=== 2.6.4 Datalog Uplink payload ===
	383	+=== Datalog Uplink payload ===
506	506
507	507	The Datalog poll reply uplink will use below payload format.
508	508
509		-(((
510		-**Retrieval data payload**
511		-)))
512	512
513		-(% border="1" style="background-color:#ffffcc; color:green; width:545px" %)
514		-|(% style="width:93px" %)(((
515		-**Size(bytes)**
516		-)))|(% style="width:71px" %)(((
517		-**2**
518		-)))|(% style="width:102px" %)(((
519		-**2**
520		-)))|(% style="width:86px" %)(((
521		-**2**
522		-)))|(% style="width:90px" %)(((
523		-**1**
524		-)))|(% style="width:85px" %)(((
525		-**4**
526		-)))
527		-|(% style="width:93px" %)(((
528		-**Value**
529		-)))|(% style="width:71px" %)(((
530		-[[External sensor data>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
531		-)))|(% style="width:102px" %)(((
532		-(((
533		-[[Built In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
534		-)))
	388	+Retrieval data payload
535	535
536		-(((
537		-[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
538		-)))
539		-)))|(% style="width:86px" %)(((
540		-(((
541		-[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
542		-)))
	390	+|**Size(bytes)**|**2**|**2**|**2**|**1**|**4**
	391	+|**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((
	392	+[[Built-In>>path:#SHT20_Temperature]]
543	543
544		-(((
545		-[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
546		-)))
547		-)))|(% style="width:90px" %)(((
548		-[[Poll message flag & Ext>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.4DatalogUplinkpayload]]
549		-)))|(% style="width:85px" %)(((
550		-(((
551		-[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.1UnixTimeStamp]]
552		-)))
	394	+[[Temperature>>path:#SHT20_Temperature]]
	395	+)))|(((
	396	+[[Built-in>>path:#SHT20_Humidity]]
553	553
554		-(((
	398	+[[Humidity>>path:#SHT20_Humidity]]
	399	+)))|[[Poll message flag & Ext>>path:#Poll_EXT]]|(((
	400	+[[Unix Time Stamp>>path:#Unix_Time_Stamp]]
	401	+
555	555
556	556	)))
557		-)))
558	558
559		-**Poll message flag & Ext**
	405	+Poll message flag & Ext
560	560
561		-(% border="1" style="background-color:#ffffcc; color:green; width:540px" %)
562		-|(% style="width:81px" %)**Bits**|(% style="width:100px" %)**7**|(% style="width:105px" %)**6**|(% style="width:84px" %)**5**|(% style="width:85px" %)**4**|(% style="width:79px" %)**[3:0]**
563		-|(% style="width:81px" %)**Status & Ext**|(% style="width:100px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:84px" %)Sync time OK|(% style="width:85px" %)Unix Time Request|(% style="width:79px" %)(((
564		-(((
	407	+
	408	+|**Bits**|**7**|**6**|**5**|**4**|**[3:0]**
	409	+|**Status & Ext**|Not Defined|Poll Message Flag|Sync time OK|Unix Time Request|(((
565	565	Ext:
566		-)))
567	567
568		-(((
569	569	0b(1001)
570	570	)))
571		-)))
572	572
573		-(((
574	574	Poll Message Flag: 1: This message is a poll message reply.
575		-)))
576	576
577		-* (((
578		-Poll Message Flag is set to 1.
579		-)))
580		-* (((
581		-Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
582		-)))
	417	+* Poll Message Flag is set to 1.
	418	+* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
583	583
584		-(((
585	585	For example, in US915 band, the max payload for different DR is:
586		-)))
587	587
588		-(((
589		-a) DR0: max is 11 bytes so one entry of data
590		-)))
	422	+a)      DR0: max is 11 bytes so one entry of data
591	591
592		-(((
593		-b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
594		-)))
	424	+b)      DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
595	595
596		-(((
597		-c) DR2: total payload includes 11 entries of data
598		-)))
	426	+c)      DR2: total payload includes 11 entries of data
599	599
600		-(((
601		-d) DR3: total payload includes 22 entries of data.
602		-)))
	428	+d)      DR3: total payload includes 22 entries of data.
603	603
604		-(((
605	605	If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0
606		-)))
607	607
608	608
609	609	**Example:**
...	...	@@ -610,10 +610,29 @@
610	610
611	611	If LHT65N has below data inside Flash:
612	612
613		-[[image:image-20220523144455-1.png||height="335" width="735"]]
	437	+Flash Addr   |Unix Time | Ext | BAT voltage|  Value
614	614
615		-If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705
	439	+80196E0 21/1/19 04:27:03 1 3145 sht_temp=22.00 sht_hum=32.6 ds_temp=327.67
616	616
	441	+80196F0 21/1/19 04:28:57 1 3145 sht_temp=21.90 sht_hum=33.1 ds_temp=327.67
	442	+
	443	+8019700 21/1/19 04:30:30 1 3145 sht_temp=21.81 sht_hum=33.4 ds_temp=327.67
	444	+
	445	+8019710 21/1/19 04:40:30 1 3145 sht_temp=21.65 sht_hum=33.7 ds_temp=327.67
	446	+
	447	+8019720 21/1/19 04:50:30 1 3147 sht_temp=21.55 sht_hum=34.1 ds_temp=327.67
	448	+
	449	+8019730 21/1/19 05:00:30 1 3149 sht_temp=21.50 sht_hum=34.1 ds_temp=327.67
	450	+
	451	+8019740 21/1/19 05:10:30 1 3149 sht_temp=21.43 sht_hum=34.6 ds_temp=327.67
	452	+
	453	+8019750 21/1/19 05:20:30 1 3151 sht_temp=21.35 sht_hum=34.9 ds_temp=327.67
	454	+
	455	+
	456	+If user sends below downlink command:
	457	+
	458	+3160065F9760066DA705
	459	+
617	617	Where : Start time: 60065F97 = time 21/1/19 04:27:03
618	618
619	619	Stop time 60066DA7= time 21/1/19 05:27:03
...	...	@@ -621,7 +621,7 @@
621	621
622	622	LHT65N will uplink this payload.
623	623
624		-[[image:image-20220523001219-13.png||height="421" width="727"]]
	467	+[[image:image-20220523001219-13.png]]
625	625
626	626	7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
627	627
...	...	@@ -639,61 +639,49 @@
639	639
640	640	Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
641	641
642		-== 2.7 Alarm Mode ==
643	643
	486	+== Alarm Mode ==
	487	+
644	644	Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
645	645
646		-(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
647	647
648		-**AT Commands for Alarm mode:**
	491	+Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
649	649
650		-(% class="box infomessage" %)
651		-(((
	493	+
	494	+AT Commands for Alarm mode:
	495	+
652	652	**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)
653		-)))
654	654
655		-(% class="box infomessage" %)
656		-(((
657	657	**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
658		-)))
659	659
660		-== 2.8 LED Indicator ==
661	661
662		-(((
	501	+
	502	+== LED Indicator ==
	503	+
663	663	The LHT65N has a triple color LED which for easy shows different stage.
664		-)))
665	665
666		-(((
667	667	While pressing ACT button, the LED will work as per LED status with ACT button.
668		-)))
669	669
670		-(((
671	671	In a normal working state:
672		-)))
673	673
674		-* (((
675		-For each uplink, the BLUE LED or RED LED will blink once.
676		-)))
677		-* (((
678		-BLUE LED when an external sensor is connected
679		-)))
680		-* (((
681		-RED LED when an external sensor is not connected
682		-)))
683		-* (((
684		-For each success downlink, the PURPLE LED will blink once
685		-)))
	510	+* For each uplink, the BLUE LED or RED LED will blink once.
	511	+* BLUE LED when an external sensor is connected
	512	+* RED LED when an external sensor is not connected
	513	+* For each success downlink, the PURPLE LED will blink once
686	686
687	687	----
688	688
689		-== 2.9 Installation ==
	517	+== Installation ==
690	690
691	691	[[image:image-20220516231650-1.png||height="436" width="428"]]
692	692
693		-= 3. Sensors & Accessories =
694	694
695		-== 3.1 E3 Temperature Probe ==
696	696
	523	+
	524	+= Sensors & Accessories =
	525	+
	526	+== E3 Temperature Probe ==
	527	+
697	697	[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]
698	698
699	699
...	...	@@ -706,7 +706,7 @@
706	706	* -55°C to 125°C
707	707	* Working voltage 2.35v ~~ 5v
708	708
709		-= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
	540	+= Configure LHT65N via AT Command or LoRaWAN Downlink =
710	710
711	711	Use can configure LHT65N via AT Command or LoRaWAN Downlink.
712	712
...	...	@@ -715,9 +715,10 @@
715	715
716	716	[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
717	717
	549	+
718	718	There are two kinds of commands to configure LHT65N, they are:
719	719
720		-(% style="color:#4f81bd" %)* **General Commands**.
	552	+* **General Commands**.
721	721
722	722	These commands are to configure:
723	723
...	...	@@ -728,18 +728,34 @@
728	728
729	729	[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
730	730
731		-(% style="color:#4f81bd" %)* **Commands special design for LHT65N**
732	732
	564	+
	565	+* **Commands special design for LHT65N**
	566	+
733	733	These commands are only valid for LHT65N, as below:
734	734
735		-== 4.1 Set Transmit Interval Time ==
736	736
	570	+== Set Transmit Interval Time ==
	571	+
737	737	Feature: Change LoRaWAN End Node Transmit Interval.
738	738
739	739	**AT Command: AT+TDC**
740	740
741		-[[image:image-20220523150701-2.png]]
	576	+|**Command Example**|**Function**|**Response**
	577	+|AT+TDC?|Show current transmit Interval|(((
	578	+30000
742	742
	580	+OK
	581	+
	582	+the interval is 30000ms = 30s
	583	+)))
	584	+|AT+TDC=60000|Set Transmit Interval|(((
	585	+OK
	586	+
	587	+Set transmit interval to 60000ms = 60 seconds
	588	+)))
	589	+
	590	+
743	743	**Downlink Command: 0x01**
744	744
745	745	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -746,29 +746,41 @@
746	746
747	747	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
748	748
749		-* **Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
750		-* **Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	597	+* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	598	+* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
751	751
752		-== 4.2 Set External Sensor Mode ==
753	753
	601	+== Set External Sensor Mode ==
	602	+
754	754	Feature: Change External Sensor Mode.
755	755
756	756	**AT Command: AT+EXT**
757	757
758		-[[image:image-20220523150759-3.png]]
	607	+|**Command Example**|**Function**|**Response**
	608	+|AT+EXT?|Get current external sensor mode|(((
	609	+1
759	759
	611	+OK
	612	+
	613	+External Sensor mode =1
	614	+)))
	615	+|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1
	616	+|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp
	617	+
	618	+
760	760	**Downlink Command: 0xA2**
761	761
762	762	Total bytes: 2 ~~ 5 bytes
763	763
764		-**Example:**
	623	+Example:
765	765
766	766	* 0xA201: Set external sensor type to E1
767	767	* 0xA209: Same as AT+EXT=9
768	768	* 0xA20702003c,Same as AT+SETCNT=60
769	769
770		-== 4.3 Enable/Disable uplink Temperature probe ID ==
771	771
	630	+== Enable/Disable uplink Temperature probe ID ==
	631	+
772	772	Feature: If PID is enabled, device will send the temperature probe ID on:
773	773
774	774	* First Packet after OTAA Join
...	...	@@ -776,73 +776,110 @@
776	776
777	777	PID is default set to disable (0)
778	778
	639	+
779	779	**AT Command:**
780	780
781		-[[image:image-20220523150928-4.png]]
	642	+|**Command Example**|**Function**|**Response**
	643	+|AT+PID=1|Enable PID uplink|OK
782	782
	645	+
783	783	**Downlink Command:**
784	784
785		-* 0xA800  **~-~->** AT+PID=0
786		-* 0xA801     **~-~->** AT+PID=1
	648	+* 0xA800     à AT+PID=0
	649	+* 0xA801     à AT+PID=1
787	787
788		-== 4.4 Set Password ==
789	789
	652	+
	653	+== Set Password ==
	654	+
790	790	Feature: Set device password, max 9 digits
791	791
792	792	**AT Command: AT+PWORD**
793	793
794		-[[image:image-20220523151052-5.png]]
	659	+|**Command Example**|**Function**|**Response**
	660	+|AT+PWORD=?|Show password|(((
	661	+123456
795	795
	663	+
	664	+OK
	665	+)))
	666	+|AT+PWORD=999999|Set password|OK
	667	+
	668	+
796	796	**Downlink Command:**
797	797
798	798	No downlink command for this feature.
799	799
800		-== 4.5 Quit AT Command ==
801	801
	674	+== Quit AT Command ==
	675	+
802	802	Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
803	803
804	804	**AT Command: AT+DISAT**
805	805
806		-[[image:image-20220523151132-6.png]]
	680	+|**Command Example**|**Function**|**Response**
	681	+|AT+DISAT|Quit AT Commands mode|OK
807	807
	683	+
808	808	**Downlink Command:**
809	809
810	810	No downlink command for this feature.
811	811
812		-== 4.6 Set to sleep mode ==
813	813
	689	+== Set to sleep mode ==
	690	+
814	814	Feature: Set device to sleep mode
815	815
816	816	**AT Command: AT+SLEEP**
817	817
818		-[[image:image-20220523151218-7.png]]
	695	+| | |
	696	+|**Command Example**|**Function**|**Response**
	697	+|AT+SLEEP|Set to sleep mode|(((
	698	+Clear all stored sensor data…
819	819
	700	+OK
	701	+)))
	702	+
	703	+
820	820	**Downlink Command:**
821	821
822	822	* There is no downlink command to set to Sleep mode.
823	823
824		-== 4.7 Set system time ==
825	825
	709	+
	710	+== Set system time ==
	711	+
826	826	Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]
827	827
828	828	**AT Command:**
829	829
830		-[[image:image-20220523151253-8.png]]
	716	+|**Command Example**|**Function**
	717	+|AT+TIMESTAMP=1611104352|(((
	718	+OK
831	831
	720	+Set System time to 2021-01-20 00:59:12
	721	+)))
	722	+
	723	+
832	832	**Downlink Command:**
833	833
834	834	0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
835	835
836		-== 4.8 Set Time Sync Mode ==
837	837
	729	+== Set Time Sync Mode ==
	730	+
838	838	Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
839	839
	733	+
840	840	SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
841	841
	736	+
842	842	**AT Command:**
843	843
844		-[[image:image-20220523151336-9.png]]
	739	+|**Command Example**|**Function**
	740	+|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)
845	845
	742	+
846	846	**Downlink Command:**
847	847
848	848	0x28 01 ~/~/ Same As AT+SYNCMOD=1
...	...	@@ -849,79 +849,166 @@
849	849
850	850	0x28 00 ~/~/ Same As AT+SYNCMOD=0
851	851
852		-== 4.9 Set Time Sync Interval ==
853	853
	750	+== Set Time Sync Interval ==
	751	+
854	854	Feature: Define System time sync interval. SYNCTDC default value: 10 days.
855	855
856	856	**AT Command:**
857	857
858		-[[image:image-20220523151411-10.png]]
	756	+|**Command Example**|**Function**
	757	+|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
859	859
	759	+
860	860	**Downlink Command:**
861	861
862	862	0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
863	863
864		-== 4.10 Print data entries base on page. ==
865	865
	765	+== Print data entries base on page. ==
	766	+
866	866	Feature: Print the sector data from start page to stop page (max is 416 pages).
867	867
868	868	**AT Command: AT+PDTA**
869	869
870		-[[image:image-20220523151450-11.png]]
	771	+|**Command Example**|**Response**
	772	+|(((
	773	+AT+PDTA=1,3
871	871
	775	+
	776	+
	777	+Print page 1 to 3
	778	+)))|(((
	779	+8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31
	780	+
	781	+8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93
	782	+
	783	+8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06
	784	+
	785	+8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12
	786	+
	787	+8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06
	788	+
	789	+8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68
	790	+
	791	+8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56
	792	+
	793	+8019570
	794	+
	795	+8019580
	796	+
	797	+8019590
	798	+
	799	+80195A0
	800	+
	801	+80195B0
	802	+
	803	+80195C0
	804	+
	805	+80195D0
	806	+
	807	+80195E0
	808	+
	809	+80195F0
	810	+
	811	+
	812	+OK
	813	+)))
	814	+
	815	+
872	872	**Downlink Command:**
873	873
874	874	No downlink commands for feature
875	875
876		-== 4.11 Print last few data entries. ==
877	877
	821	+
	822	+== Print last few data entries. ==
	823	+
878	878	Feature: Print the last few data entries
879	879
880	880	**AT Command: AT+PLDTA**
881	881
882		-[[image:image-20220523151524-12.png]]
	828	+|**Command Example**|**Response**
	829	+|(((
	830	+AT+PLDTA=5
883	883
	832	+
	833	+
	834	+Print last 5 entries
	835	+)))|(((
	836	+Stop Tx and RTP events when read sensor data
	837	+
	838	+1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75
	839	+
	840	+2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43
	841	+
	842	+3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56
	843	+
	844	+4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75
	845	+
	846	+5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43
	847	+
	848	+Start Tx and RTP events
	849	+
	850	+OK
	851	+)))
	852	+
	853	+
884	884	**Downlink Command:**
885	885
886	886	No downlink commands for feature
887	887
888		-== 4.12 Clear Flash Record ==
889	889
	859	+
	860	+== Clear Flash Record ==
	861	+
890	890	Feature: Clear flash storage for data log feature.
891	891
892	892	**AT Command: AT+CLRDTA**
893	893
894		-[[image:image-20220523151556-13.png]]
	866	+|**Command Example**|**Function**|**Response**
	867	+|AT+CLRDTA|Clear date record|(((
	868	+Clear all stored sensor data…
895	895
	870	+OK
	871	+)))
	872	+
	873	+
896	896	**Downlink Command: 0xA3**
897	897
898	898	* Example: 0xA301 ~/~/Same as AT+CLRDTA
899	899
900		-= 5. Battery & How to replace =
901	901
902		-== 5.1 Battery Type ==
903	903
	880	+
	881	+= Battery & How to replace =
	882	+
	883	+== Battery Type ==
	884	+
904	904	LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
905	905
906	906	The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
907	907	[[image:image-20220515075034-1.png||height="208" width="644"]]
908	908
	890	+
909	909	The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
910	910
911	911
912		-== 5.2 Replace Battery ==
	894	+== Replace Battery ==
913	913
914	914	LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
915	915
916	916	[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]
917	917
918		-== 5.3 Battery Life Analyze ==
919	919
	901	+== Battery Life Analyze ==
	902	+
920	920	Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
921	921	https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
922	922
923		-= 6. Order Info =
924	924
	907	+= Order Info =
	908	+
925	925	Part Number: (% class="mark" %)**LHT65N-XX**
926	926
927	927	**XX**: The default frequency band
...	...	@@ -939,7 +939,7 @@
939	939
940	940	* **E3**: External Temperature Probe
941	941
942		-= 7. Packing Info =
	926	+= Packing Info =
943	943
944	944	**Package Includes**:
945	945
...	...	@@ -954,10 +954,10 @@
954	954	* Package Size / pcs : 14.5 x 8 x 5 cm
955	955	* Weight / pcs : 170g
956	956
957		-= 8. FCC Warning =
	941	+= FCC Warning =
958	958
959	959	This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
960	960
961		-(1) This device may not cause harmful interference；
	945	+(1) This device may not cause harmful interference, and
962	962
963		-(2) this device must accept any interference received, including interference that may cause undesired operation.
	947	+(2) this device must accept any interference received, including interference that may cause undesired operation

image-20220523111447-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-910.1 KB

Content

image-20220523112300-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-27.5 KB

Content

image-20220523115324-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-910.1 KB

Content

image-20220523144455-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-33.4 KB

Content

image-20220523150701-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.3 KB

Content

image-20220523150759-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.2 KB

Content

image-20220523150928-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-4.1 KB

Content

image-20220523151052-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-8.6 KB

Content

image-20220523151132-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.6 KB

Content

image-20220523151218-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.8 KB

Content

image-20220523151253-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.5 KB

Content

image-20220523151336-9.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-6.6 KB

Content

image-20220523151411-10.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.5 KB

Content

image-20220523151450-11.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-38.4 KB

Content

image-20220523151524-12.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-24.2 KB

Content

image-20220523151556-13.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-5.7 KB

Content