Last modified by Mengting Qiu on 2024/04/30 14:27
<
From version < 57.4 >
edited by Xiaoling
on 2022/05/23 13:52
To version < 55.3 >
edited by Xiaoling
on 2022/05/23 11:29
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,44 +1,28 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220523115324-1.jpeg||height="500" width="500"]]
2 +[[image:image-20220523111447-1.jpeg||height="448" width="448"]]
3 3  
4 +{{box cssClass="floatinginfobox" title="**Contents**"}}
5 +{{toc/}}
6 +{{/box}}
4 4  
5 -**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
6 -
7 -
8 -
9 -**Table of Contents：**
10 -
11 11  {{toc/}}
12 12  
13 -
14 -
15 15  = 1.Introduction =
16 16  
17 17  == 1.1 What is LHT65N Temperature & Humidity Sensor ==
18 18  
19 -(((
20 -The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% style="color:#4f81bd" %)**Temperature Sensor**(%%)**.**
21 -)))
22 22  
23 -(((
15 +The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a(% class="mark" %) **built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% class="mark" %)**Temperature Sensor**(%%)**.**
16 +
24 24  The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
25 -)))
26 26  
27 -(((
28 28  LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
29 -)))
30 30  
31 -(((
32 32  LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
33 -)))
34 34  
35 -(((
36 -LHT65N supports (% style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
37 -)))
23 +LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
38 38  
39 -(((
40 40  *The actual battery life depends on how often to send data, please see the battery analyzer chapter.
41 -)))
42 42  
43 43  == 1.2 Features ==
44 44  
... ... @@ -56,69 +56,36 @@
56 56  
57 57  == 1.3 Specification ==
58 58  
59 -(((
60 60  **Built-in Temperature Sensor:**
61 -)))
62 62  
63 -* (((
64 -Resolution: 0.01 °C
65 -)))
66 -* (((
67 -Accuracy Tolerance : Typ ±0.3 °C
68 -)))
69 -* (((
70 -Long Term Drift: < 0.02 °C/yr
71 -)))
72 -* (((
73 -Operating Range: -40 ~~ 85 °C
74 -)))
45 +* Resolution: 0.01 °C
46 +* Accuracy Tolerance : Typ ±0.3 °C
47 +* Long Term Drift: < 0.02 °C/yr
48 +* Operating Range: -40 ~~ 85 °C
75 75  
76 -(((
77 77  **Built-in Humidity Sensor:**
78 -)))
79 79  
80 -* (((
81 -Resolution: 0.04 %RH
82 -)))
83 -* (((
84 -Accuracy Tolerance : Typ ±3 %RH
85 -)))
86 -* (((
87 -Long Term Drift: < 0.02 °C/yr
88 -)))
89 -* (((
90 -Operating Range: 0 ~~ 96 %RH
91 -)))
52 +* Resolution: 0.04 %RH
53 +* Accuracy Tolerance : Typ ±3 %RH
54 +* Long Term Drift: < 0.02 °C/yr
55 +* Operating Range: 0 ~~ 96 %RH
92 92  
93 -(((
94 94  **External Temperature Sensor:**
95 -)))
96 96  
97 -* (((
98 -Resolution: 0.0625 °C
99 -)))
100 -* (((
101 -±0.5°C accuracy from -10°C to +85°C
102 -)))
103 -* (((
104 -±2°C accuracy from -55°C to +125°C
105 -)))
106 -* (((
107 -Operating Range: -55 °C ~~ 125 °C
108 -)))
59 +* Resolution: 0.0625 °C
60 +* ±0.5°C accuracy from -10°C to +85°C
61 +* ±2°C accuracy from -55°C to +125°C
62 +* Operating Range: -55 °C ~~ 125 °C
109 109  
110 110  = 2. Connect LHT65N to IoT Server =
111 111  
112 112  == 2.1 How does LHT65N work? ==
113 113  
114 -(((
115 115  LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
116 -)))
117 117  
118 -(((
119 119  If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
120 -)))
121 121  
72 +
122 122  == 2.2 How to Activate LHT65N? ==
123 123  
124 124  The LHT65N has two working modes:
... ... @@ -126,17 +126,15 @@
126 126  * **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
127 127  * **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
128 128  
129 -(((
130 130  The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
131 -)))
132 132  
133 133  [[image:image-20220515123819-1.png||height="379" width="317"]]
134 134  
135 -(% border="1" style="background-color:#ffffcc; color:green; width:739px" %)
136 -|**Behavior on ACT**|**Function**|(% style="width:424px" %)**Action**
137 -|**Pressing ACT between 1s < time < 3s**|Test uplink status|(% style="width:424px" %)If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
138 -|**Pressing ACT for more than 3s**|Active Device|(% style="width:424px" %)green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
139 -|**Fast press ACT 5 times**|Deactivate Device|(% style="width:424px" %)red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
84 +(% border="1" %)
85 +|**Behavior on ACT**|**Function**|**Action**
86 +|**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
87 +|**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
88 +|**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
140 140  
141 141  == 2.3 Example to join LoRaWAN network ==
142 142  
... ... @@ -183,29 +183,33 @@
183 183  
184 184  Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
185 185  
186 -[[image:image-20220522233300-8.png||height="219" width="722"]]
135 +[[image:image-20220522233300-8.png]]
187 187  
188 188  
189 189  == 2.4 Uplink Payload ==
190 190  
191 -The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
140 +The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and(% class="mark" %) every 20 minutes(%%) send one uplink by default.
192 192  
193 -After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
142 +After each uplink, the (% class="mark" %)BLUE LED(%%) will blink once.
194 194  
195 195  
196 -(% border="1" style="width:605px" %)
197 -|(% style="width:106px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:183px" %)**2**|(% style="width:155.172px" %)**2**|(% style="width:49px" %)**1**|(% style="width:92px" %)**4**
198 -|(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.2BAT-BatteryInfo]]|(% style="width:183px" %)(((
199 -[[Built In Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
200 -)))|(% style="width:155.172px" %)(((
201 -[[Built-in Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
202 -)))|(% style="width:49px" %)[[Ext>>path:#Extension_Sensor]] #|(% style="width:92px" %)[[Ext value>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
145 +(% border="1" style="width:572px" %)
146 +|(% style="width:106px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:128px" %)**2**|(% style="width:103px" %)**2**|(% style="width:72px" %)**1**|(% style="width:89px" %)**4**
147 +|(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:#Battery]]|(% style="width:128px" %)(((
148 +[[Built-In>>path:#SHT20_Temperature]]
203 203  
150 +[[Temperature>>path:#SHT20_Temperature]]
151 +)))|(% style="width:103px" %)(((
152 +[[Built-in>>path:#SHT20_Humidity]]
153 +
154 +[[Humidity>>path:#SHT20_Humidity]]
155 +)))|(% style="width:72px" %)[[Ext>>path:#Extension_Sensor]] #|(% style="width:89px" %)[[Ext value>>path:#Extension_sensor_value]]
156 +
204 204  * The First 6 bytes: has fix meanings for every LHT65N.
205 205  * The 7th byte (EXT #): defines the external sensor model.
206 206  * The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
207 207  
208 -=== 2.4.1 Decoder in TTN V3 ===
161 +=== Decoder in TTN V3 ===
209 209  
210 210  When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
211 211  
... ... @@ -213,15 +213,16 @@
213 213  
214 214  [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
215 215  
216 -[[image:image-20220522234118-10.png||height="353" width="729"]]
169 +[[image:image-20220522234118-10.png]]
217 217  
218 -=== 2.4.2 BAT-Battery Info ===
219 219  
172 +=== BAT-Battery Info ===
173 +
220 220  These two bytes of BAT include the battery state and the actually voltage
221 221  
222 -(% border="1" style="width:508px" %)
223 -|(% style="width:75px" %)Bit(bit)|(% style="width:268px" %)[15:14]|(% style="width:162px" %)[13:0]
224 -|(% style="width:75px" %)Value|(% style="width:268px" %)(((
176 +(% style="width:646px" %)
177 +|Bit(bit)|(% style="width:272px" %)[15:14]|(% style="width:214px" %)[13:0]
178 +|Value|(% style="width:272px" %)(((
225 225  BAT Status
226 226  
227 227  00(b): Ultra Low ( BAT <= 2.50v)
... ... @@ -231,7 +231,7 @@
231 231  10(b): OK   (2.55v <= BAT <=2.65v)
232 232  
233 233  11(b): Good   (BAT >= 2.65v)
234 -)))|(% style="width:162px" %)Actually BAT voltage
188 +)))|(% style="width:214px" %)Actually BAT voltage
235 235  
236 236  [[image:image-20220522235639-1.png]]
237 237  
... ... @@ -240,7 +240,7 @@
240 240  * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
241 241  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
242 242  
243 -=== 2.4.3 Built-in Temperature ===
197 +=== Built-in Temperature ===
244 244  
245 245  [[image:image-20220522235639-2.png]]
246 246  
... ... @@ -250,13 +250,13 @@
250 250  
251 251  * Temperature:  (0xF5C6-65536)/100=-26.18℃
252 252  
253 -=== 2.4.4 Built-in Humidity ===
207 +=== Built-in Humidity ===
254 254  
255 255  [[image:image-20220522235639-4.png]]
256 256  
257 257  * Humidity:    0x025C/10=60.4%
258 258  
259 -=== 2.4.5 Ext # ===
213 +=== Ext # ===
260 260  
261 261  Bytes for External Sensor:
262 262  
... ... @@ -265,16 +265,19 @@
265 265  |(% style="width:139px" %)0x01|(% style="width:484px" %)Sensor E3, Temperature Sensor
266 266  |(% style="width:139px" %)0x09|(% style="width:484px" %)Sensor E3, Temperature Sensor, Datalog Mod
267 267  
268 -=== 2.4.6 Ext value ===
222 +=== Ext value ===
269 269  
270 -==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====
224 +==== Ext~=1, E3 Temperature Sensor ====
271 271  
272 272  [[image:image-20220522235639-5.png]]
273 273  
228 +
274 274  * DS18B20 temp=0x0ADD/100=27.81℃
275 275  
276 276  The last 2 bytes of data are meaningless
277 277  
233 +
234 +
278 278  [[image:image-20220522235639-6.png]]
279 279  
280 280  * External temperature= (0xF54F-65536)/100=-27.37℃
... ... @@ -281,15 +281,16 @@
281 281  
282 282  The last 2 bytes of data are meaningless
283 283  
241 +
284 284  If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
285 285  
286 286  
287 -==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====
245 +==== Ext~=9, E3 sensor with Unix Timestamp ====
288 288  
289 289  Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
290 290  
291 291  
292 -(% border="1" style="width:697px" %)
250 +(% style="width:697px" %)
293 293  |(% style="width:96px" %)**Size(bytes)**|(% style="width:164px" %)**2**|(% style="width:104px" %)**2**|(% style="width:106px" %)**2**|(% style="width:108px" %)**1**|(% style="width:116px" %)**4**
294 294  |(% style="width:96px" %)**Value**|(% style="width:164px" %)[[External temperature>>path:#DS18b20_value]]|(% style="width:104px" %)(((
295 295  [[Built-In>>path:#SHT20_Temperature]]
... ... @@ -307,9 +307,9 @@
307 307  [[Time Stamp>>path:#Unix_Time_Stamp]]
308 308  )))
309 309  
310 -* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]
268 +* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]
311 311  
312 -(% border="1" style="width:587px" %)
270 +(% style="width:587px" %)
313 313  |Bit(bit)|(% style="width:280px" %)[15:14]|(% style="width:136px" %)[11:0]
314 314  |Value|(% style="width:280px" %)(((
315 315  BAT Status
... ... @@ -329,7 +329,7 @@
329 329  
330 330  * **Status & Ext Byte**
331 331  
332 -(% border="1" style="width:732px" %)
290 +(% style="width:732px" %)
333 333  |(% style="width:128px" %)**Bits**|(% style="width:102px" %)**7**|(% style="width:145px" %)**6**|(% style="width:117px" %)**5**|(% style="width:147px" %)**4**|(% style="width:90px" %)**[3:0]**
334 334  |(% style="width:128px" %)**Status & Ext**|(% style="width:102px" %)Not Defined|(% style="width:145px" %)Poll Message Flag|(% style="width:117px" %)Sync time OK|(% style="width:147px" %)Unix Time Request|(% style="width:90px" %)(((
335 335  Ext:
... ... @@ -341,10 +341,11 @@
341 341  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
342 342  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
343 343  
344 -== 2.5 Show data on Datacake ==
302 +== Show data on Datacake ==
345 345  
346 346  Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
347 347  
306 +
348 348  **Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.
349 349  
350 350  **Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
... ... @@ -369,11 +369,11 @@
369 369  [[image:image-20220523000825-10.png||height="432" width="762"]]
370 370  
371 371  
372 -== 2.6 Datalog Feature ==
331 +== Datalog Feature ==
373 373  
374 374  This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.
375 375  
376 -=== 2.6.1 Unix TimeStamp ===
335 +=== Unix TimeStamp ===
377 377  
378 378  LHT65N uses Unix TimeStamp format based on
379 379  
... ... @@ -384,12 +384,12 @@
384 384  
385 385  Below is the converter example
386 386  
387 -[[image:image-20220523001219-12.png||height="302" width="730"]]
346 +[[image:image-20220523001219-12.png||height="353" width="853"]]
388 388  
389 389  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
390 390  
391 391  
392 -=== 2.6.2 Set Device Time ===
351 +=== Set Device Time ===
393 393  
394 394  There are two ways to set device’s time:
395 395  
... ... @@ -407,12 +407,12 @@
407 407  User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
408 408  
409 409  
410 -=== 2.6.3 Poll sensor value ===
369 +=== Poll sensor value ===
411 411  
412 412  User can poll sensor value based on timestamps from the server. Below is the downlink command.
413 413  
414 414  
415 -(% border="1" style="width:454px" %)
374 +(% style="width:454px" %)
416 416  |(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte
417 417  |(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval
418 418  
... ... @@ -426,7 +426,7 @@
426 426  Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
427 427  
428 428  
429 -=== 2.6.4 Datalog Uplink payload ===
388 +=== Datalog Uplink payload ===
430 430  
431 431  The Datalog poll reply uplink will use below payload format.
432 432  
... ... @@ -433,7 +433,6 @@
433 433  
434 434  Retrieval data payload
435 435  
436 -(% border="1" %)
437 437  |**Size(bytes)**|**2**|**2**|**2**|**1**|**4**
438 438  |**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((
439 439  [[Built-In>>path:#SHT20_Temperature]]
... ... @@ -452,7 +452,6 @@
452 452  Poll message flag & Ext
453 453  
454 454  
455 -(% border="1" %)
456 456  |**Bits**|**7**|**6**|**5**|**4**|**[3:0]**
457 457  |**Status & Ext**|Not Defined|Poll Message Flag|Sync time OK|Unix Time Request|(((
458 458  Ext:
... ... @@ -512,7 +512,7 @@
512 512  
513 513  LHT65N will uplink this payload.
514 514  
515 -[[image:image-20220523001219-13.png||height="421" width="727"]]
472 +[[image:image-20220523001219-13.png]]
516 516  
517 517  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
518 518  
... ... @@ -531,7 +531,7 @@
531 531  Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
532 532  
533 533  
534 -== 2.7 Alarm Mode ==
491 +== Alarm Mode ==
535 535  
536 536  Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
537 537  
... ... @@ -547,7 +547,7 @@
547 547  
548 548  
549 549  
550 -== 2.8 LED Indicator ==
507 +== LED Indicator ==
551 551  
552 552  The LHT65N has a triple color LED which for easy shows different stage.
553 553  
... ... @@ -562,14 +562,17 @@
562 562  
563 563  ----
564 564  
565 -== 2.9 Installation ==
522 +== Installation ==
566 566  
567 567  [[image:image-20220516231650-1.png||height="436" width="428"]]
568 568  
569 -= 3. Sensors & Accessories =
570 570  
571 -== 3.1 E3 Temperature Probe ==
572 572  
528 +
529 += Sensors & Accessories =
530 +
531 +== E3 Temperature Probe ==
532 +
573 573  [[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]
574 574  
575 575  
... ... @@ -582,7 +582,7 @@
582 582  * -55°C to 125°C
583 583  * Working voltage 2.35v ~~ 5v
584 584  
585 -= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
545 += Configure LHT65N via AT Command or LoRaWAN Downlink =
586 586  
587 587  Use can configure LHT65N via AT Command or LoRaWAN Downlink.
588 588  
... ... @@ -591,6 +591,7 @@
591 591  
592 592  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
593 593  
554 +
594 594  There are two kinds of commands to configure LHT65N, they are:
595 595  
596 596  * **General Commands**.
... ... @@ -604,17 +604,19 @@
604 604  
605 605  [[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
606 606  
568 +
569 +
607 607  * **Commands special design for LHT65N**
608 608  
609 609  These commands are only valid for LHT65N, as below:
610 610  
611 -== 4.1 Set Transmit Interval Time ==
612 612  
575 +== Set Transmit Interval Time ==
576 +
613 613  Feature: Change LoRaWAN End Node Transmit Interval.
614 614  
615 615  **AT Command: AT+TDC**
616 616  
617 -(% border="1" %)
618 618  |**Command Example**|**Function**|**Response**
619 619  |AT+TDC?|Show current transmit Interval|(((
620 620  30000
... ... @@ -638,13 +638,12 @@
638 638  * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
639 639  * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
640 640  
641 -== 4.2 Set External Sensor Mode ==
604 +== Set External Sensor Mode ==
642 642  
643 643  Feature: Change External Sensor Mode.
644 644  
645 645  **AT Command: AT+EXT**
646 646  
647 -(% border="1" %)
648 648  |**Command Example**|**Function**|**Response**
649 649  |AT+EXT?|Get current external sensor mode|(((
650 650  1
... ... @@ -666,7 +666,7 @@
666 666  * 0xA209: Same as AT+EXT=9
667 667  * 0xA20702003c,Same as AT+SETCNT=60
668 668  
669 -== 4.3 Enable/Disable uplink Temperature probe ID ==
631 +== Enable/Disable uplink Temperature probe ID ==
670 670  
671 671  Feature: If PID is enabled, device will send the temperature probe ID on:
672 672  
... ... @@ -678,7 +678,6 @@
678 678  
679 679  **AT Command:**
680 680  
681 -(% border="1" %)
682 682  |**Command Example**|**Function**|**Response**
683 683  |AT+PID=1|Enable PID uplink|OK
684 684  
... ... @@ -687,13 +687,12 @@
687 687  * 0xA800     à AT+PID=0
688 688  * 0xA801     à AT+PID=1
689 689  
690 -== 4.4 Set Password ==
651 +== Set Password ==
691 691  
692 692  Feature: Set device password, max 9 digits
693 693  
694 694  **AT Command: AT+PWORD**
695 695  
696 -(% border="1" %)
697 697  |**Command Example**|**Function**|**Response**
698 698  |AT+PWORD=?|Show password|(((
699 699  123456
... ... @@ -707,13 +707,13 @@
707 707  
708 708  No downlink command for this feature.
709 709  
710 -== 4.5 Quit AT Command ==
711 711  
671 +== Quit AT Command ==
672 +
712 712  Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
713 713  
714 714  **AT Command: AT+DISAT**
715 715  
716 -(% border="1" %)
717 717  |**Command Example**|**Function**|**Response**
718 718  |AT+DISAT|Quit AT Commands mode|OK
719 719  
... ... @@ -722,13 +722,12 @@
722 722  No downlink command for this feature.
723 723  
724 724  
725 -== 4.6 Set to sleep mode ==
685 +== Set to sleep mode ==
726 726  
727 727  Feature: Set device to sleep mode
728 728  
729 729  **AT Command: AT+SLEEP**
730 730  
731 -(% border="1" %)
732 732  | | |
733 733  |**Command Example**|**Function**|**Response**
734 734  |AT+SLEEP|Set to sleep mode|(((
... ... @@ -741,13 +741,12 @@
741 741  
742 742  * There is no downlink command to set to Sleep mode.
743 743  
744 -== 4.7 Set system time ==
703 +== Set system time ==
745 745  
746 746  Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]
747 747  
748 748  **AT Command:**
749 749  
750 -(% border="1" %)
751 751  |**Command Example**|**Function**
752 752  |AT+TIMESTAMP=1611104352|(((
753 753  OK
... ... @@ -759,10 +759,12 @@
759 759  
760 760  0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
761 761  
762 -== 4.8 Set Time Sync Mode ==
763 763  
721 +== Set Time Sync Mode ==
722 +
764 764  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
765 765  
725 +
766 766  SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
767 767  
768 768  
... ... @@ -777,13 +777,13 @@
777 777  
778 778  0x28 00 ~/~/ Same As AT+SYNCMOD=0
779 779  
780 -== 4.9 Set Time Sync Interval ==
781 781  
741 +== Set Time Sync Interval ==
742 +
782 782  Feature: Define System time sync interval. SYNCTDC default value: 10 days.
783 783  
784 784  **AT Command:**
785 785  
786 -(% border="1" %)
787 787  |**Command Example**|**Function**
788 788  |AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
789 789  
... ... @@ -791,13 +791,13 @@
791 791  
792 792  0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
793 793  
794 -== 4.10 Print data entries base on page. ==
795 795  
755 +== Print data entries base on page. ==
756 +
796 796  Feature: Print the sector data from start page to stop page (max is 416 pages).
797 797  
798 798  **AT Command: AT+PDTA**
799 799  
800 -(% border="1" %)
801 801  |**Command Example**|**Response**
802 802  |(((
803 803  AT+PDTA=1,3
... ... @@ -846,13 +846,14 @@
846 846  
847 847  No downlink commands for feature
848 848  
849 -== 4.11 Print last few data entries. ==
850 850  
810 +
811 +== Print last few data entries. ==
812 +
851 851  Feature: Print the last few data entries
852 852  
853 853  **AT Command: AT+PLDTA**
854 854  
855 -(% border="1" %)
856 856  |**Command Example**|**Response**
857 857  |(((
858 858  AT+PLDTA=5
... ... @@ -882,13 +882,14 @@
882 882  
883 883  No downlink commands for feature
884 884  
885 -== 4.12 Clear Flash Record ==
886 886  
847 +
848 +== Clear Flash Record ==
849 +
887 887  Feature: Clear flash storage for data log feature.
888 888  
889 889  **AT Command: AT+CLRDTA**
890 890  
891 -(% border="1" %)
892 892  |**Command Example**|**Function**|**Response**
893 893  |AT+CLRDTA|Clear date record|(((
894 894  Clear all stored sensor data…
... ... @@ -900,31 +900,35 @@
900 900  
901 901  * Example: 0xA301 ~/~/Same as AT+CLRDTA
902 902  
903 -= 5. Battery & How to replace =
904 904  
905 -== 5.1 Battery Type ==
866 += Battery & How to replace =
906 906  
868 +== Battery Type ==
869 +
907 907  LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
908 908  
909 909  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
910 910  [[image:image-20220515075034-1.png||height="208" width="644"]]
911 911  
875 +
912 912  The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
913 913  
914 914  
915 -== 5.2 Replace Battery ==
879 +== Replace Battery ==
916 916  
917 917  LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
918 918  
919 919  [[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]
920 920  
921 -== 5.3 Battery Life Analyze ==
922 922  
886 +== Battery Life Analyze ==
887 +
923 923  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
924 924  https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
925 925  
926 -= 6. Order Info =
927 927  
892 += Order Info =
893 +
928 928  Part Number: (% class="mark" %)**LHT65N-XX**
929 929  
930 930  **XX**: The default frequency band
... ... @@ -942,7 +942,7 @@
942 942  
943 943  * **E3**: External Temperature Probe
944 944  
945 -= 7. Packing Info =
911 += Packing Info =
946 946  
947 947  **Package Includes**:
948 948  
... ... @@ -957,10 +957,10 @@
957 957  * Package Size / pcs : 14.5 x 8 x 5 cm
958 958  * Weight / pcs : 170g
959 959  
960 -= 8. FCC Warning =
926 += FCC Warning =
961 961  
962 962  This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
963 963  
964 -(1) This device may not cause harmful interference；
930 +(1) This device may not cause harmful interference, and
965 965  
966 -(2) this device must accept any interference received, including interference that may cause undesired operation.
932 +(2) this device must accept any interference received, including interference that may cause undesired operation
image-20220523115324-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -910.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0