Last modified by Mengting Qiu on 2024/04/30 14:27
<
From version < 56.3 >
edited by Xiaoling
on 2022/05/23 11:59
To version < 51.1 >
edited by Edwin Chen
on 2022/05/23 00:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,47 +1,27 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20220523115324-1.jpeg||height="500" width="500"]]
3 -
4 -
5 -**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
6 -
7 -
8 -
9 -**Table of Contents：**
10 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
11 11  {{toc/}}
3 +{{/box}}
12 12  
5 += Overview =
13 13  
7 +[[image:LHT65N_10.png||alt="LHT65_Image" height="265" width="265"]]
14 14  
15 -= 1.Introduction =
16 16  
17 -== 1.1 What is LHT65N Temperature & Humidity Sensor ==
10 +The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a(% class="mark" %) **built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% class="mark" %)**Temperature Sensor**(%%)**.**
18 18  
19 -(((
20 -The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% style="color:#4f81bd" %)**Temperature Sensor**(%%)**.**
21 -)))
22 -
23 -(((
24 24  The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
25 -)))
26 26  
27 -(((
28 28  LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
29 -)))
30 30  
31 -(((
32 32  LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
33 -)))
34 34  
35 -(((
36 -LHT65N supports (% style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
37 -)))
18 +LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
38 38  
39 -(((
40 40  *The actual battery life depends on how often to send data, please see the battery analyzer chapter.
41 -)))
42 42  
43 -== 1.2 Features ==
44 44  
23 +== Features: ==
24 +
45 45  * Wall mountable
46 46  * LoRaWAN v1.0.3 Class A protocol
47 47  * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
... ... @@ -54,62 +54,32 @@
54 54  * Tri-color LED to indicate working status
55 55  * Datalog feature
56 56  
57 -== 1.3 Specification ==
37 +== Specification: ==
58 58  
59 -(((
60 60  **Built-in Temperature Sensor:**
61 -)))
62 62  
63 -* (((
64 -Resolution: 0.01 °C
65 -)))
66 -* (((
67 -Accuracy Tolerance : Typ ±0.3 °C
68 -)))
69 -* (((
70 -Long Term Drift: < 0.02 °C/yr
71 -)))
72 -* (((
73 -Operating Range: -40 ~~ 85 °C
74 -)))
41 +* Resolution: 0.01 °C
42 +* Accuracy Tolerance : Typ ±0.3 °C
43 +* Long Term Drift: < 0.02 °C/yr
44 +* Operating Range: -40 ~~ 85 °C
75 75  
76 -(((
77 77  **Built-in Humidity Sensor:**
78 -)))
79 79  
80 -* (((
81 -Resolution: 0.04 %RH
82 -)))
83 -* (((
84 -Accuracy Tolerance : Typ ±3 %RH
85 -)))
86 -* (((
87 -Long Term Drift: < 0.02 °C/yr
88 -)))
89 -* (((
90 -Operating Range: 0 ~~ 96 %RH
91 -)))
48 +* Resolution: 0.04 %RH
49 +* Accuracy Tolerance : Typ ±3 %RH
50 +* Long Term Drift: < 0.02 °C/yr
51 +* Operating Range: 0 ~~ 96 %RH
92 92  
93 -(((
94 94  **External Temperature Sensor:**
95 -)))
96 96  
97 -* (((
98 -Resolution: 0.0625 °C
99 -)))
100 -* (((
101 -±0.5°C accuracy from -10°C to +85°C
102 -)))
103 -* (((
104 -±2°C accuracy from -55°C to +125°C
105 -)))
106 -* (((
107 -Operating Range: -55 °C ~~ 125 °C
108 -)))
55 +* Resolution: 0.0625 °C
56 +* ±0.5°C accuracy from -10°C to +85°C
57 +* ±2°C accuracy from -55°C to +125°C
58 +* Operating Range: -55 °C ~~ 125 °C
109 109  
110 -= 2. Connect LHT65N to IoT Server =
60 += Connect LHT65N to IoT Server =
111 111  
112 -== 2.1 How does LHT65N work? ==
62 +== How does LHT65N work? ==
113 113  
114 114  LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
115 115  
... ... @@ -116,7 +116,7 @@
116 116  If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
117 117  
118 118  
119 -== 2.2 How to Activate LHT65N? ==
69 +== How to Activate LHT65N? ==
120 120  
121 121  The LHT65N has two working modes:
122 122  
... ... @@ -127,13 +127,12 @@
127 127  
128 128  [[image:image-20220515123819-1.png||height="379" width="317"]]
129 129  
130 -(% border="1" %)
131 131  |**Behavior on ACT**|**Function**|**Action**
132 132  |**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
133 133  |**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
134 134  |**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
135 135  
136 -== 2.3 Example to join LoRaWAN network ==
85 +== Example to join LoRaWAN network ==
137 137  
138 138  (% class="wikigeneratedid" %)
139 139  This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
... ... @@ -144,7 +144,7 @@
144 144  Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
145 145  
146 146  
147 -=== 2.3.1 Step 1: Create Device n TTN ===
96 +=== **Step 1**: Create Device n TTN ===
148 148  
149 149  Create a device in TTN V3 with the OTAA keys from LHT65N.
150 150  
... ... @@ -174,7 +174,7 @@
174 174  [[image:image-20220522233118-7.png]]
175 175  
176 176  
177 -=== 2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===
126 +=== Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===
178 178  
179 179  Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
180 180  
... ... @@ -181,7 +181,7 @@
181 181  [[image:image-20220522233300-8.png]]
182 182  
183 183  
184 -== 2.4 Uplink Payload ==
133 +== Uplink Payload: ==
185 185  
186 186  The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and(% class="mark" %) every 20 minutes(%%) send one uplink by default.
187 187  
... ... @@ -188,7 +188,7 @@
188 188  After each uplink, the (% class="mark" %)BLUE LED(%%) will blink once.
189 189  
190 190  
191 -(% border="1" style="width:572px" %)
140 +(% style="width:572px" %)
192 192  |(% style="width:106px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:128px" %)**2**|(% style="width:103px" %)**2**|(% style="width:72px" %)**1**|(% style="width:89px" %)**4**
193 193  |(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:#Battery]]|(% style="width:128px" %)(((
194 194  [[Built-In>>path:#SHT20_Temperature]]
... ... @@ -204,7 +204,7 @@
204 204  * The 7th byte (EXT #): defines the external sensor model.
205 205  * The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
206 206  
207 -=== 2.4.1 Decoder in TTN V3 ===
156 +=== Decoder in TTN V3 ===
208 208  
209 209  When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
210 210  
... ... @@ -215,7 +215,7 @@
215 215  [[image:image-20220522234118-10.png]]
216 216  
217 217  
218 -=== 2.4.2 BAT-Battery Info ===
167 +=== BAT-Battery Info ===
219 219  
220 220  These two bytes of BAT include the battery state and the actually voltage
221 221  
... ... @@ -240,7 +240,7 @@
240 240  * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
241 241  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
242 242  
243 -=== 2.4.3 Built-in Temperature ===
192 +=== Built-in Temperature ===
244 244  
245 245  [[image:image-20220522235639-2.png]]
246 246  
... ... @@ -250,13 +250,13 @@
250 250  
251 251  * Temperature:  (0xF5C6-65536)/100=-26.18℃
252 252  
253 -=== 2.4.4 Built-in Humidity ===
202 +=== Built-in Humidity ===
254 254  
255 255  [[image:image-20220522235639-4.png]]
256 256  
257 257  * Humidity:    0x025C/10=60.4%
258 258  
259 -=== 2.4.5 Ext # ===
208 +=== Ext # ===
260 260  
261 261  Bytes for External Sensor:
262 262  
... ... @@ -265,16 +265,19 @@
265 265  |(% style="width:139px" %)0x01|(% style="width:484px" %)Sensor E3, Temperature Sensor
266 266  |(% style="width:139px" %)0x09|(% style="width:484px" %)Sensor E3, Temperature Sensor, Datalog Mod
267 267  
268 -=== 2.4.6 Ext value ===
217 +=== Ext value ===
269 269  
270 -==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====
219 +==== Ext~=1, E3 Temperature Sensor ====
271 271  
272 272  [[image:image-20220522235639-5.png]]
273 273  
223 +
274 274  * DS18B20 temp=0x0ADD/100=27.81℃
275 275  
276 276  The last 2 bytes of data are meaningless
277 277  
228 +
229 +
278 278  [[image:image-20220522235639-6.png]]
279 279  
280 280  * External temperature= (0xF54F-65536)/100=-27.37℃
... ... @@ -281,15 +281,16 @@
281 281  
282 282  The last 2 bytes of data are meaningless
283 283  
236 +
284 284  If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
285 285  
286 286  
287 -==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====
240 +==== Ext~=9, E3 sensor with Unix Timestamp ====
288 288  
289 289  Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
290 290  
291 291  
292 -(% border="1" style="width:697px" %)
245 +(% style="width:697px" %)
293 293  |(% style="width:96px" %)**Size(bytes)**|(% style="width:164px" %)**2**|(% style="width:104px" %)**2**|(% style="width:106px" %)**2**|(% style="width:108px" %)**1**|(% style="width:116px" %)**4**
294 294  |(% style="width:96px" %)**Value**|(% style="width:164px" %)[[External temperature>>path:#DS18b20_value]]|(% style="width:104px" %)(((
295 295  [[Built-In>>path:#SHT20_Temperature]]
... ... @@ -307,9 +307,9 @@
307 307  [[Time Stamp>>path:#Unix_Time_Stamp]]
308 308  )))
309 309  
310 -* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]
263 +* **Battery status & **[[(% class="wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]
311 311  
312 -(% border="1" style="width:587px" %)
265 +(% style="width:587px" %)
313 313  |Bit(bit)|(% style="width:280px" %)[15:14]|(% style="width:136px" %)[11:0]
314 314  |Value|(% style="width:280px" %)(((
315 315  BAT Status
... ... @@ -329,7 +329,7 @@
329 329  
330 330  * **Status & Ext Byte**
331 331  
332 -(% border="1" style="width:732px" %)
285 +(% style="width:732px" %)
333 333  |(% style="width:128px" %)**Bits**|(% style="width:102px" %)**7**|(% style="width:145px" %)**6**|(% style="width:117px" %)**5**|(% style="width:147px" %)**4**|(% style="width:90px" %)**[3:0]**
334 334  |(% style="width:128px" %)**Status & Ext**|(% style="width:102px" %)Not Defined|(% style="width:145px" %)Poll Message Flag|(% style="width:117px" %)Sync time OK|(% style="width:147px" %)Unix Time Request|(% style="width:90px" %)(((
335 335  Ext:
... ... @@ -341,10 +341,11 @@
341 341  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
342 342  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
343 343  
344 -== 2.5 Show data on Datacake ==
297 +== Show data on Datacake ==
345 345  
346 346  Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
347 347  
301 +
348 348  **Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.
349 349  
350 350  **Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
... ... @@ -369,11 +369,11 @@
369 369  [[image:image-20220523000825-10.png||height="432" width="762"]]
370 370  
371 371  
372 -== 2.6 Datalog Feature ==
326 +== Datalog Feature ==
373 373  
374 374  This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.
375 375  
376 -=== 2.6.1 Unix TimeStamp ===
330 +=== Unix TimeStamp ===
377 377  
378 378  LHT65N uses Unix TimeStamp format based on
379 379  
... ... @@ -384,12 +384,12 @@
384 384  
385 385  Below is the converter example
386 386  
387 -[[image:image-20220523001219-12.png||height="302" width="730"]]
341 +[[image:image-20220523001219-12.png||height="353" width="853"]]
388 388  
389 389  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
390 390  
391 391  
392 -=== 2.6.2 Set Device Time ===
346 +=== Set Device Time ===
393 393  
394 394  There are two ways to set device’s time:
395 395  
... ... @@ -407,15 +407,16 @@
407 407  User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
408 408  
409 409  
410 -=== 2.6.3 Poll sensor value ===
364 +=== Poll sensor value ===
411 411  
412 412  User can poll sensor value based on timestamps from the server. Below is the downlink command.
413 413  
414 414  
415 -(% border="1" style="width:454px" %)
369 +(% style="width:454px" %)
416 416  |(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte
417 417  |(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval
418 418  
373 +
419 419  Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
420 420  
421 421  
... ... @@ -426,7 +426,7 @@
426 426  Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
427 427  
428 428  
429 -=== 2.6.4 Datalog Uplink payload ===
384 +=== Datalog Uplink payload ===
430 430  
431 431  The Datalog poll reply uplink will use below payload format.
432 432  
... ... @@ -433,7 +433,6 @@
433 433  
434 434  Retrieval data payload
435 435  
436 -(% border="1" %)
437 437  |**Size(bytes)**|**2**|**2**|**2**|**1**|**4**
438 438  |**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((
439 439  [[Built-In>>path:#SHT20_Temperature]]
... ... @@ -449,10 +449,10 @@
449 449  
450 450  )))
451 451  
406 +
452 452  Poll message flag & Ext
453 453  
454 454  
455 -(% border="1" %)
456 456  |**Bits**|**7**|**6**|**5**|**4**|**[3:0]**
457 457  |**Status & Ext**|Not Defined|Poll Message Flag|Sync time OK|Unix Time Request|(((
458 458  Ext:
... ... @@ -460,6 +460,7 @@
460 460  0b(1001)
461 461  )))
462 462  
417 +
463 463  Poll Message Flag: 1: This message is a poll message reply.
464 464  
465 465  * Poll Message Flag is set to 1.
... ... @@ -512,7 +512,7 @@
512 512  
513 513  LHT65N will uplink this payload.
514 514  
515 -[[image:image-20220523001219-13.png||height="421" width="727"]]
470 +[[image:image-20220523001219-13.png]]
516 516  
517 517  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
518 518  
... ... @@ -531,7 +531,7 @@
531 531  Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
532 532  
533 533  
534 -== 2.7 Alarm Mode ==
489 +== Alarm Mode ==
535 535  
536 536  Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
537 537  
... ... @@ -547,7 +547,7 @@
547 547  
548 548  
549 549  
550 -== 2.8 LED Indicator ==
505 +== LED Indicator ==
551 551  
552 552  The LHT65N has a triple color LED which for easy shows different stage.
553 553  
... ... @@ -562,14 +562,17 @@
562 562  
563 563  ----
564 564  
565 -== 2.9 Installation ==
520 +== Installation ==
566 566  
567 -[[image:image-20220516231650-1.png||height="436" width="428"]]
522 +[[image:image-20220516231650-1.png||height="632" width="620"]]
568 568  
569 -= 3. Sensors & Accessories =
570 570  
571 -== 3.1 E3 Temperature Probe ==
572 572  
526 +
527 += Sensors & Accessories =
528 +
529 +== E3 Temperature Probe ==
530 +
573 573  [[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]
574 574  
575 575  
... ... @@ -581,350 +581,36 @@
581 581  * Operating Range: -40 ~~ 125 °C
582 582  * -55°C to 125°C
583 583  * Working voltage 2.35v ~~ 5v
542 +
584 584  
585 -= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
544 += Battery & How to replace =
586 586  
587 -Use can configure LHT65N via AT Command or LoRaWAN Downlink.
546 +== Battery Type ==
588 588  
589 -* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
590 -* LoRaWAN Downlink instruction for different platforms:
591 -
592 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
593 -
594 -There are two kinds of commands to configure LHT65N, they are:
595 -
596 -* **General Commands**.
597 -
598 -These commands are to configure:
599 -
600 -* General system settings like: uplink interval.
601 -* LoRaWAN protocol & radio-related commands.
602 -
603 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
604 -
605 -[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
606 -
607 -* **Commands special design for LHT65N**
608 -
609 -These commands are only valid for LHT65N, as below:
610 -
611 -== 4.1 Set Transmit Interval Time ==
612 -
613 -Feature: Change LoRaWAN End Node Transmit Interval.
614 -
615 -**AT Command: AT+TDC**
616 -
617 -(% border="1" %)
618 -|**Command Example**|**Function**|**Response**
619 -|AT+TDC?|Show current transmit Interval|(((
620 -30000
621 -
622 -OK
623 -
624 -the interval is 30000ms = 30s
625 -)))
626 -|AT+TDC=60000|Set Transmit Interval|(((
627 -OK
628 -
629 -Set transmit interval to 60000ms = 60 seconds
630 -)))
631 -
632 -**Downlink Command: 0x01**
633 -
634 -Format: Command Code (0x01) followed by 3 bytes time value.
635 -
636 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
637 -
638 -* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
639 -* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
640 -
641 -== 4.2 Set External Sensor Mode ==
642 -
643 -Feature: Change External Sensor Mode.
644 -
645 -**AT Command: AT+EXT**
646 -
647 -(% border="1" %)
648 -|**Command Example**|**Function**|**Response**
649 -|AT+EXT?|Get current external sensor mode|(((
650 -1
651 -
652 -OK
653 -
654 -External Sensor mode =1
655 -)))
656 -|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1
657 -|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp
658 -
659 -**Downlink Command: 0xA2**
660 -
661 -Total bytes: 2 ~~ 5 bytes
662 -
663 -Example:
664 -
665 -* 0xA201: Set external sensor type to E1
666 -* 0xA209: Same as AT+EXT=9
667 -* 0xA20702003c,Same as AT+SETCNT=60
668 -
669 -== 4.3 Enable/Disable uplink Temperature probe ID ==
670 -
671 -Feature: If PID is enabled, device will send the temperature probe ID on:
672 -
673 -* First Packet after OTAA Join
674 -* Every 24 hours since the first packet.
675 -
676 -PID is default set to disable (0)
677 -
678 -
679 -**AT Command:**
680 -
681 -(% border="1" %)
682 -|**Command Example**|**Function**|**Response**
683 -|AT+PID=1|Enable PID uplink|OK
684 -
685 -**Downlink Command:**
686 -
687 -* 0xA800     à AT+PID=0
688 -* 0xA801     à AT+PID=1
689 -
690 -== 4.4 Set Password ==
691 -
692 -Feature: Set device password, max 9 digits
693 -
694 -**AT Command: AT+PWORD**
695 -
696 -(% border="1" %)
697 -|**Command Example**|**Function**|**Response**
698 -|AT+PWORD=?|Show password|(((
699 -123456
700 -
701 -
702 -OK
703 -)))
704 -|AT+PWORD=999999|Set password|OK
705 -
706 -**Downlink Command:**
707 -
708 -No downlink command for this feature.
709 -
710 -== 4.5 Quit AT Command ==
711 -
712 -Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
713 -
714 -**AT Command: AT+DISAT**
715 -
716 -(% border="1" %)
717 -|**Command Example**|**Function**|**Response**
718 -|AT+DISAT|Quit AT Commands mode|OK
719 -
720 -**Downlink Command:**
721 -
722 -No downlink command for this feature.
723 -
724 -
725 -== 4.6 Set to sleep mode ==
726 -
727 -Feature: Set device to sleep mode
728 -
729 -**AT Command: AT+SLEEP**
730 -
731 -(% border="1" %)
732 -| | |
733 -|**Command Example**|**Function**|**Response**
734 -|AT+SLEEP|Set to sleep mode|(((
735 -Clear all stored sensor data…
736 -
737 -OK
738 -)))
739 -
740 -**Downlink Command:**
741 -
742 -* There is no downlink command to set to Sleep mode.
743 -
744 -== 4.7 Set system time ==
745 -
746 -Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]
747 -
748 -**AT Command:**
749 -
750 -(% border="1" %)
751 -|**Command Example**|**Function**
752 -|AT+TIMESTAMP=1611104352|(((
753 -OK
754 -
755 -Set System time to 2021-01-20 00:59:12
756 -)))
757 -
758 -**Downlink Command:**
759 -
760 -0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
761 -
762 -== 4.8 Set Time Sync Mode ==
763 -
764 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
765 -
766 -SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
767 -
768 -
769 -**AT Command:**
770 -
771 -|**Command Example**|**Function**
772 -|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)
773 -
774 -**Downlink Command:**
775 -
776 -0x28 01 ~/~/ Same As AT+SYNCMOD=1
777 -
778 -0x28 00 ~/~/ Same As AT+SYNCMOD=0
779 -
780 -== 4.9 Set Time Sync Interval ==
781 -
782 -Feature: Define System time sync interval. SYNCTDC default value: 10 days.
783 -
784 -**AT Command:**
785 -
786 -(% border="1" %)
787 -|**Command Example**|**Function**
788 -|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
789 -
790 -**Downlink Command:**
791 -
792 -0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
793 -
794 -== 4.10 Print data entries base on page. ==
795 -
796 -Feature: Print the sector data from start page to stop page (max is 416 pages).
797 -
798 -**AT Command: AT+PDTA**
799 -
800 -(% border="1" %)
801 -|**Command Example**|**Response**
802 -|(((
803 -AT+PDTA=1,3
804 -
805 -
806 -
807 -Print page 1 to 3
808 -)))|(((
809 -8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31
810 -
811 -8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93
812 -
813 -8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06
814 -
815 -8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12
816 -
817 -8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06
818 -
819 -8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68
820 -
821 -8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56
822 -
823 -8019570
824 -
825 -8019580
826 -
827 -8019590
828 -
829 -80195A0
830 -
831 -80195B0
832 -
833 -80195C0
834 -
835 -80195D0
836 -
837 -80195E0
838 -
839 -80195F0
840 -
841 -
842 -OK
843 -)))
844 -
845 -**Downlink Command:**
846 -
847 -No downlink commands for feature
848 -
849 -== 4.11 Print last few data entries. ==
850 -
851 -Feature: Print the last few data entries
852 -
853 -**AT Command: AT+PLDTA**
854 -
855 -(% border="1" %)
856 -|**Command Example**|**Response**
857 -|(((
858 -AT+PLDTA=5
859 -
860 -
861 -
862 -Print last 5 entries
863 -)))|(((
864 -Stop Tx and RTP events when read sensor data
865 -
866 -1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75
867 -
868 -2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43
869 -
870 -3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56
871 -
872 -4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75
873 -
874 -5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43
875 -
876 -Start Tx and RTP events
877 -
878 -OK
879 -)))
880 -
881 -**Downlink Command:**
882 -
883 -No downlink commands for feature
884 -
885 -== 4.12 Clear Flash Record ==
886 -
887 -Feature: Clear flash storage for data log feature.
888 -
889 -**AT Command: AT+CLRDTA**
890 -
891 -(% border="1" %)
892 -|**Command Example**|**Function**|**Response**
893 -|AT+CLRDTA|Clear date record|(((
894 -Clear all stored sensor data…
895 -
896 -OK
897 -)))
898 -
899 -**Downlink Command: 0xA3**
900 -
901 -* Example: 0xA301 ~/~/Same as AT+CLRDTA
902 -
903 -= 5. Battery & How to replace =
904 -
905 -== 5.1 Battery Type ==
906 -
907 907  LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
908 908  
909 909  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
910 910  [[image:image-20220515075034-1.png||height="208" width="644"]]
911 911  
553 +
912 912  The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
913 913  
914 914  
915 -== 5.2 Replace Battery ==
557 +== Replace Battery ==
916 916  
917 917  LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
918 918  
919 919  [[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]
920 920  
921 -== 5.3 Battery Life Analyze ==
922 922  
564 +== Battery Life Analyze ==
565 +
923 923  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
924 924  https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
925 925  
926 -= 6. Order Info =
927 927  
570 += Order Info =
571 +
928 928  Part Number: (% class="mark" %)**LHT65N-XX**
929 929  
930 930  **XX**: The default frequency band
... ... @@ -942,7 +942,7 @@
942 942  
943 943  * **E3**: External Temperature Probe
944 944  
945 -= 7. Packing Info =
589 += Packing Info =
946 946  
947 947  **Package Includes**:
948 948  
... ... @@ -957,10 +957,10 @@
957 957  * Package Size / pcs : 14.5 x 8 x 5 cm
958 958  * Weight / pcs : 170g
959 959  
960 -= 8. FCC Warning =
604 += FCC Warning =
961 961  
962 962  This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
963 963  
964 -(1) This device may not cause harmful interference；
608 +(1) This device may not cause harmful interference, and
965 965  
966 -(2) this device must accept any interference received, including interference that may cause undesired operation.
610 +(2) this device must accept any interference received, including interference that may cause undesired operation
image-20220523111447-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -910.1 KB
Content
image-20220523112300-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content
image-20220523115324-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -910.1 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0