<
From version < 3.1 >
edited by Edwin Chen
on 2022/05/06 20:46
To version < 18.1 >
edited by Edwin Chen
on 2022/05/15 12:38
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,13 +11,13 @@
11 11  
12 12  The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
13 13  
14 -LHT65N has a built-in 2400mAh non-chargeable battery which can be used for more than 10 years*.
14 +LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
15 15  
16 16  LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
17 17  
18 -LHT65N supports Datalog feature. It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
18 +LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
19 19  
20 -*The actual battery life depends on how often to send data, please see battery analyzer chapter.
20 +*The actual battery life depends on how often to send data, please see the battery analyzer chapter.
21 21  
22 22  
23 23  == Features: ==
... ... @@ -27,11 +27,11 @@
27 27  * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
28 28  * AT Commands to change parameters
29 29  * Remote configure parameters via LoRaWAN Downlink
30 -* Firmware upgradable via program port
31 -* Built-in 2400mAh battery for more than 10 years of use.
30 +* Firmware upgradeable via program port
31 +* Built-in 2400mAh battery for up to 10 years of use.
32 32  * Built-in Temperature & Humidity sensor
33 33  * Optional External Sensors
34 -* Tri-color LED to indicate status
34 +* Tri-color LED to indicate working status
35 35  * Datalog feature
36 36  
37 37  == Specification: ==
... ... @@ -41,7 +41,7 @@
41 41  * Resolution: 0.01 °C
42 42  * Accuracy Tolerance : Typ ±0.3 °C
43 43  * Long Term Drift: < 0.02 °C/yr
44 -* Operating Range: -40 ~~ 125 °C
44 +* Operating Range: -40 ~~ 85 °C
45 45  
46 46  **Built-in Humidity Sensor:**
47 47  
... ... @@ -50,7 +50,7 @@
50 50  * Long Term Drift: < 0.02 °C/yr
51 51  * Operating Range: 0 ~~ 96 %RH
52 52  
53 -**External Temperature Sensor – E1:**
53 +**External Temperature Sensor:**
54 54  
55 55  * Resolution: 0.0625 °C
56 56  * ±0.5°C accuracy from -10°C to +85°C
... ... @@ -57,13 +57,81 @@
57 57  * ±2°C accuracy from -55°C to +125°C
58 58  * Operating Range: -55 °C ~~ 125 °C
59 59  
60 +
61 += Connect LHT65N to IoT Server =
62 +
63 +== How does LHT65N work? ==
64 +
65 +LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
66 +
67 +If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
68 +
69 +
70 +== How to Activate LHT65N? ==
71 +
72 +The LHT65N has two working modes:
73 +
74 +* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
75 +* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.
76 +
77 +
78 +The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
79 +
80 +[[image:image-20220515123819-1.png||height="379" width="317"]]
81 +
82 +|**Behavior on ACT**|**Function**|**Action**
83 +|**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
84 +|**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
85 +|**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
86 +
87 +
88 +
89 += Sensors & Accessories =
90 +
91 +== E3 Temperature Probe ==
92 +
93 +[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]
94 +
95 +
96 +With Temperature sensor with 2 meters cable long
97 +
98 +* Resolution: 0.0625 °C
99 +* ±0.5°C accuracy from -10°C to +85°C
100 +* ±2°C accuracy from -55°C to +125°C
101 +* Operating Range: -40 ~~ 125 °C
102 +* -55°C to 125°C
103 +* Working voltage 2.35v ~~ 5v
60 60  
61 61  
106 += Battery & How to replace =
107 +
108 +== Battery Type ==
109 +
110 +LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
111 +
112 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
113 +[[image:image-20220515075034-1.png||height="208" width="644"]]
114 +
115 +
116 +The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
62 62  
63 63  
119 +== Replace Battery ==
120 +
121 +LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
122 +
123 +[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]
124 +
125 +
126 +== Battery Life Analyze ==
127 +
128 +Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
129 +https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
130 +
131 +
64 64  = Order Info =
65 65  
66 -Part Number: (% class="mark" %)**LHT65-XX**
134 +Part Number: (% class="mark" %)**LHT65N-XX**
67 67  
68 68  **XX**: The default frequency band
69 69  
... ... @@ -75,3 +75,30 @@
75 75  * **US915**: LoRaWAN US915 band
76 76  * **IN865**: LoRaWAN IN865 band
77 77  * **CN470**: LoRaWAN CN470 band
146 +
147 +**YY**: Sensor Accessories
148 +
149 +* **E3**: External Temperature Probe
150 +
151 += Packing Info =
152 +
153 +**Package Includes**:
154 +
155 +* LHT65N Temperature & Humidity Sensor x 1
156 +* Program cable x 1
157 +* Optional external sensor
158 +
159 +**Dimension and weight**:
160 +
161 +* Device Size:  13.5 x 7 x 3 cm
162 +* Device Weight: 105g
163 +* Package Size / pcs : 14.5 x 8 x 5 cm
164 +* Weight / pcs : 170g
165 +
166 += FCC Warning =
167 +
168 +This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
169 +
170 +(1) This device may not cause harmful interference, and
171 +
172 +(2) this device must accept any interference received, including interference that may cause undesired operation
image-20220515075034-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +46.8 KB
Content
image-20220515075440-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +289.7 KB
Content
image-20220515075625-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +234.7 KB
Content
image-20220515080154-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +296.6 KB
Content
image-20220515080330-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +305.2 KB
Content
image-20220515123819-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +386.3 KB
Content
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0