Skip to Content
Last modified by Mengting Qiu on 2025/07/03 14:48
From version 166.1
edited by Bei Jinggeng
on 2022/06/20 16:57
Change comment: There is no comment for this version
To version 147.6
edited by Xiaoling
on 2022/06/17 14:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -22,9 +22,6 @@
22 22  (% _mstvisible="1" %)
23 23  (((
24 24  (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 -
26 -
27 -(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 28  The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
29 29  )))
30 30  
... ... @@ -205,8 +205,8 @@
205 205  The LHT65N has two working modes:
206 206  
207 207  (% _mstvisible="1" %)
208 -* (% style="color:blue" %)**Deep Sleep Mode**(%%): LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
209 -* (% style="color:blue" %)**Working Mode**(%%):  In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65N will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
205 +* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
206 +* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
210 210  
211 211  (% _mstvisible="1" %)
212 212  (((
... ... @@ -244,7 +244,7 @@
244 244  Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
245 245  
246 246  (% _mstvisible="1" %)
247 -[[image:image-20220617150003-1.jpeg]]
244 +[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
248 248  
249 249  (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
250 250  User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
... ... @@ -471,6 +471,7 @@
471 471  )))
472 472  
473 473  
471 +
474 474  (% _mstvisible="1" %)
475 475  ==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
476 476  
... ... @@ -591,18 +591,6 @@
591 591  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
592 592  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
593 593  
594 -==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.3 Ext~=6, ADC Sensor (use with E2 Cable)(%%) ====
595 -
596 -In this mode, user can connect external ADC sensor to check ADC value. The 3V3_OUT can
597 -
598 -be used to power the external ADC sensor; user can control the power on time for this
599 -
600 -sensor by setting:
601 -
602 -AT+EXT=6,timeout  (% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)Time to power this sensor, from 0 ~~ 65535ms
603 -
604 -
605 -
606 606  (% _mstvisible="1" %)
607 607  == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
608 608  
... ... @@ -1094,19 +1094,19 @@
1094 1094  (% _mstvisible="1" class="box infomessage" %)
1095 1095  (((
1096 1096  (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1097 -(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%):  Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1083 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1098 1098  
1099 1099  (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1100 -(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%):  The interval between checking the alarm temperature. (In minutes)
1086 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1101 1101  
1102 1102  (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1103 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%):  Gets or sets the alarm range of the internal temperature sensor
1089 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1104 1104  
1105 1105  (% _mstvisible="2" style="text-align: left;" %)
1106 -(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%):  Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1092 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1107 1107  
1108 1108  (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1109 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%):  Set the internal temperature sensor alarm range from 45 to 105.
1095 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1110 1110  )))
1111 1111  
1112 1112  
... ... @@ -1149,6 +1149,9 @@
1149 1149  For each success downlink, the PURPLE LED will blink once
1150 1150  
1151 1151  
1138 +
1139 +
1140 +(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1152 1152  
1153 1153  )))
1154 1154  
... ... @@ -1163,17 +1163,6 @@
1163 1163  = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1164 1164  
1165 1165  (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1166 -== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E2 Extension Cable(%%) ==
1167 -
1168 -[[image:image-20220619092222-1.png||height="182" width="188"]][[image:image-20220619092313-2.png||height="182" width="173"]]
1169 -
1170 -1m long breakout cable for LHT65N
1171 -
1172 -[[image:image-20220619092421-3.png||height="371" width="529"]]
1173 -
1174 -
1175 -
1176 -(% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1177 1177  == (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E3 Temperature Probe(%%) ==
1178 1178  
1179 1179  (% _mstvisible="1" %)
... ... @@ -1263,7 +1263,7 @@
1263 1263  (% _mstvisible="1" %)
1264 1264  (((
1265 1265  (% _mstvisible="2" style="text-align: left;" %)
1266 -(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**Commands special design for LHT65N**
1244 +(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506054" _msttexthash="792038" %)**Commands special design for LHT65N**
1267 1267  )))
1268 1268  
1269 1269  (% _mstvisible="1" %)
... ... @@ -1666,7 +1666,6 @@
1666 1666  (% _mstvisible="1" %)
1667 1667  [[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1668 1668  
1669 -
1670 1670  (% _mstvisible="1" %)
1671 1671  == (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1672 1672  
... ... @@ -1717,7 +1717,7 @@
1717 1717  
1718 1718  (((
1719 1719  (% _msthash="736726" _msttexthash="67213055" %)
1720 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1697 +In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.htmlml]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1721 1721  )))
1722 1722  
1723 1723  (((
... ... @@ -1929,7 +1929,7 @@
1929 1929  (% _msthash="506131" _msttexthash="14585714" %)
1930 1930  AT commands：
1931 1931  
1932 -[[image:image-20220620153708-1.png||height="603" width="723"]]
1909 +[[image:image-20220615092034-1.png||_mstalt="428870"]]
1933 1933  
1934 1934  (% _msthash="506132" _msttexthash="337922" %)
1935 1935  Downlink commands:
... ... @@ -1938,13 +1938,13 @@
1938 1938  (% _msthash="506133" _msttexthash="33046" %)
1939 1939  **TTN:**
1940 1940  
1941 -[[image:image-20220615092124-2.png||_mstalt="429221" height="649" width="688"]]
1918 +[[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
1942 1942  
1943 1943  
1944 1944  (% _msthash="506134" _msttexthash="11113791" %)
1945 1945  **Helium：**
1946 1946  
1947 -[[image:image-20220615092551-3.png||_mstalt="430794" height="423" width="835"]]
1924 +[[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
1948 1948  
1949 1949  
1950 1950  (% _msthash="506135" _msttexthash="4159844" %)
... ... @@ -1952,13 +1952,13 @@
1952 1952  
1953 1953  [[image:image-20220615094850-6.png||_mstalt="433082"]]
1954 1954  
1955 -[[image:image-20220615094904-7.png||_mstalt="433485" height="281" width="911"]]
1932 +[[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
1956 1956  
1957 1957  
1958 1958  (% _msthash="506136" _msttexthash="39286" %)
1959 1959  **Aws:**
1960 1960  
1961 -[[image:image-20220615092939-4.png||_mstalt="434460" height="448" width="894"]]
1938 +[[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
1962 1962  
1963 1963  
1964 1964  == (% _msthash="1220570" _msttexthash="33199257" %)6.3 How to change the uplink interval？(%%) ==
... ... @@ -1971,22 +1971,22 @@
1971 1971  
1972 1972  [[image:image-20220615153355-1.png]]
1973 1973  
1974 -[[image:image-20220620154900-5.jpeg||height="427" width="570"]]
1951 +(% _msthash="506138" _msttexthash="243997" %)
1952 +* (% style="background-color:yellow" %)1 < - -> GND  < - ->  Black
1975 1975  
1976 -(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1954 +(% _msthash="506139" _msttexthash="257166" %)
1955 +* (% style="background-color:yellow" %)5 < - ->  RXD  < - ->  White
1977 1977  
1978 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1957 +(% _msthash="506140" _msttexthash="253799" %)
1958 +* (% style="background-color:yellow" %)9 < - ->  TXD  < - ->  Green
1979 1979  
1980 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1960 +[[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1981 1981  
1982 1982  
1983 -To switch from download mode to command mode, press reset key
1984 -
1985 -
1986 1986  (((
1987 1987  (% _msthash="736728" _msttexthash="67213055" %)
1988 1988  (((
1989 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1966 +In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.htmlml]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1990 1990  )))
1991 1991  )))
1992 1992  
... ... @@ -1994,31 +1994,32 @@
1994 1994  (% _msthash="736729" _msttexthash="1907009" %)
1995 1995  Input password and ATZ to activate LHT65N,As shown below:
1996 1996  
1997 -[[image:image-20220615154519-3.png||height="672" width="807"]]
1974 +[[image:image-20220615154519-3.png]]
1998 1998  
1999 1999  
2000 2000  )))
2001 2001  
2002 -== 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
2003 2003  
2004 2004  
1981 +== 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
1982 +
2005 2005  [[image:image-20220615153355-1.png]]
2006 2006  
2007 -(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1985 +(% _msthash="506141" _msttexthash="231309" %)
1986 +*
1987 +** (% style="background-color:yellow" %)4  < - ->  3.3V  < - ->  Blue
2008 2008  
2009 -(% style="background-color:yellow" %)**4  < - ->  3.3V  < - ->  Blue**
1989 +(% _msthash="506142" _msttexthash="257166" %)
1990 +*
1991 +** (% style="background-color:yellow" %)5 < - ->  RXD  < - ->  White
2010 2010  
2011 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1993 +(% _msthash="506143" _msttexthash="253799" %)
1994 +*
1995 +** (% style="background-color:yellow" %)9 < - ->  TXD  < - ->  Green
2012 2012  
2013 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1997 +Use after connection， ground wire（1 < - -> GND  < - ->  Black） for 1s and then pull it out.Then restart the device.
2014 2014  
2015 -[[image:image-20220620160241-6.jpeg||height="428" width="571"]]
2016 2016  
2017 -Press reset after connecting the 4boot cable to enter the download mode.
2018 -
2019 -[[image:image-20220620160516-7.png||height="435" width="435"]]
2020 -
2021 -
2022 2022  (% _mstmutation="1" %)**Step1**(%%): Install TremoProgrammer  first.
2023 2023  
2024 2024  [[image:image-20220615170542-5.png]]
... ... @@ -2034,9 +2034,9 @@
2034 2034  [[image:image-20220615171334-6.png]]
2035 2035  
2036 2036  
2037 -(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2015 +(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2038 2038  
2039 -[[image:image-20220620160723-8.png]]
2017 +
2040 2040  )))
2041 2041  
2042 2042  (% _mstvisible="1" %)
... ... @@ -2108,6 +2108,8 @@
2108 2108  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2109 2109  (% style="color:red" %)**E3**(%%): External Temperature Probe
2110 2110  
2089 +
2090 +(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2111 2111  
2112 2112  )))
2113 2113  
... ... @@ -2131,6 +2131,11 @@
2131 2131  )))
2132 2132  * (% _mstvisible="3" %)
2133 2133  (((
2114 +(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
2115 +Program cable x 1
2116 +)))
2117 +* (% _mstvisible="3" %)
2118 +(((
2134 2134  (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2135 2135  Optional external sensor
2136 2136  )))
... ... @@ -2156,6 +2156,9 @@
2156 2156  (% _mstvisible="3" %)
2157 2157  (((
2158 2158  
2144 +
2145 +(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2146 +
2159 2159  )))
2160 2160  
2161 2161  = (% _msthash="184782" _msttexthash="16007771" %)9. Reference material(%%) =
1655715107046-668.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -112.3 KB
Content
1655715126541-843.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -30.8 KB
Content
1655715211981-156.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -347.1 KB
Content
image-20220617150003-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content
image-20220619092222-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -530.7 KB
Content
image-20220619092313-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -452.5 KB
Content
image-20220619092421-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -234.1 KB
Content
image-20220620153708-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -69.2 KB
Content
image-20220620154433-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -2.6 MB
Content
image-20220620154721-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -139.7 KB
Content
image-20220620154900-5.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -160.9 KB
Content
image-20220620160241-6.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -150.8 KB
Content
image-20220620160516-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -2.6 MB
Content
image-20220620160723-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -15.5 KB
Content