Skip to Content
Last modified by Mengting Qiu on 2025/07/03 14:48
From version 148.18
edited by Xiaoling
on 2022/06/17 15:07
Change comment: There is no comment for this version
To version 142.1
edited by Bei Jinggeng
on 2022/06/15 17:13
Change comment: Uploaded new attachment "image-20220615171334-6.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220613162008-1.png||_mstalt="428142" height="579" width="379"]]
2 +[[image:image-20220613162008-1.png||height="579" width="379"]]
3 3  
4 4  
5 5  
... ... @@ -22,9 +22,6 @@
22 22  (% _mstvisible="1" %)
23 23  (((
24 24  (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 -
26 -
27 -(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 28  The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
29 29  )))
30 30  
... ... @@ -77,9 +77,6 @@
77 77  * Tri-color LED to indicate working status
78 78  * Datalog feature
79 79  
80 -
81 -
82 -
83 83  (% _mstvisible="1" %)
84 84  == (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
85 85  
... ... @@ -208,8 +208,8 @@
208 208  The LHT65N has two working modes:
209 209  
210 210  (% _mstvisible="1" %)
211 -* (% style="color:blue" %)**Deep Sleep Mode**(%%): LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
212 -* (% style="color:blue" %)**Working Mode**(%%):  In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65N will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
205 +* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
206 +* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
213 213  
214 214  (% _mstvisible="1" %)
215 215  (((
... ... @@ -247,7 +247,7 @@
247 247  Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
248 248  
249 249  (% _mstvisible="1" %)
250 -[[image:image-20220617150003-1.jpeg]]
244 +[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
251 251  
252 252  (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
253 253  User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
... ... @@ -368,9 +368,6 @@
368 368  * The 7th byte (EXT #): defines the external sensor model.
369 369  * The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
370 370  
371 -
372 -
373 -
374 374  (% _mstvisible="1" %)
375 375  === (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
376 376  
... ... @@ -407,9 +407,6 @@
407 407  * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
408 408  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
409 409  
410 -
411 -
412 -
413 413  (% _mstvisible="1" %)
414 414  === (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
415 415  
... ... @@ -425,9 +425,6 @@
425 425  (% _mstvisible="1" %)
426 426  * Temperature:  (0xF5C6-65536)/100=-26.18℃
427 427  
428 -
429 -
430 -
431 431  (% _mstvisible="1" %)
432 432  === (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
433 433  
... ... @@ -437,9 +437,6 @@
437 437  (% _mstvisible="1" %)
438 438  * Humidity:    0x025C/10=60.4%
439 439  
440 -
441 -
442 -
443 443  (% _mstvisible="1" %)
444 444  === (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
445 445  
... ... @@ -607,9 +607,6 @@
607 607  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
608 608  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
609 609  
610 -
611 -
612 -
613 613  (% _mstvisible="1" %)
614 614  == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
615 615  
... ... @@ -672,9 +672,6 @@
672 672  1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
673 673  1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
674 674  
675 -
676 -
677 -
678 678  (% _mstvisible="1" %)
679 679  === (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
680 680  
... ... @@ -1064,25 +1064,18 @@
1064 1064  (% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
1065 1065  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1066 1066  
1067 -(% _msthash="315237" _msttexthash="1385839" %)
1068 1068  Where the first 11 bytes is for the first entry:
1069 1069  
1070 -(% _msthash="315238" _msttexthash="274846" %)
1071 1071  7FFF089801464160065F97
1072 1072  
1073 -(% _msthash="315239" _msttexthash="617435" %)
1074 1074  Ext sensor data=0x7FFF/100=327.67
1075 1075  
1076 -(% _msthash="315240" _msttexthash="270543" %)
1077 1077  Temp=0x0898/100=22.00
1078 1078  
1079 -(% _msthash="315241" _msttexthash="211783" %)
1080 1080  Hum=0x0146/10=32.6
1081 1081  
1082 -(% _msthash="315242" _msttexthash="1569776" %)
1083 1083  poll message flag & Ext=0x41,means reply data,Ext=1
1084 1084  
1085 -(% _msthash="315243" _msttexthash="1120509" %)
1086 1086  Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1087 1087  
1088 1088  
... ... @@ -1104,19 +1104,19 @@
1104 1104  (% _mstvisible="1" class="box infomessage" %)
1105 1105  (((
1106 1106  (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1107 -(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%):  Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1076 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1108 1108  
1109 1109  (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1110 -(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%):  The interval between checking the alarm temperature. (In minutes)
1079 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1111 1111  
1112 1112  (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1113 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%):  Gets or sets the alarm range of the internal temperature sensor
1082 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1114 1114  
1115 1115  (% _mstvisible="2" style="text-align: left;" %)
1116 -(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%):  Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1085 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1117 1117  
1118 1118  (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1119 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%):  Set the internal temperature sensor alarm range from 45 to 105.
1088 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1120 1120  )))
1121 1121  
1122 1122  
... ... @@ -1159,6 +1159,9 @@
1159 1159  For each success downlink, the PURPLE LED will blink once
1160 1160  
1161 1161  
1131 +
1132 +
1133 +(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1162 1162  
1163 1163  )))
1164 1164  
... ... @@ -1173,7 +1173,7 @@
1173 1173  = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1174 1174  
1175 1175  (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1176 -== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E3 Temperature Probe(%%) ==
1148 +== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
1177 1177  
1178 1178  (% _mstvisible="1" %)
1179 1179  [[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
... ... @@ -1190,9 +1190,6 @@
1190 1190  * -55°C to 125°C
1191 1191  * Working voltage 2.35v ~~ 5v
1192 1192  
1193 -
1194 -
1195 -
1196 1196  (% _mstvisible="1" style="text-align: left;" %)
1197 1197  = (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1198 1198  
... ... @@ -1210,7 +1210,7 @@
1210 1210  )))
1211 1211  * (% _mstvisible="3" %)
1212 1212  (((
1213 -(% _msthash="903319" _msttexthash="3225859" _mstvisible="4" %)
1182 +(% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
1214 1214  LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
1215 1215  )))
1216 1216  
... ... @@ -1229,7 +1229,7 @@
1229 1229  (% _mstvisible="1" %)
1230 1230  (((
1231 1231  (% _mstvisible="2" style="text-align: left;" %)
1232 -(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1201 +(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1233 1233  )))
1234 1234  
1235 1235  (% _mstvisible="1" %)
... ... @@ -1252,7 +1252,7 @@
1252 1252  
1253 1253  (% _mstvisible="1" %)
1254 1254  (((
1255 -(% _msthash="506251" _msttexthash="12349142" _mstvisible="2" style="text-align: left;" %)
1224 +(% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
1256 1256  They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1257 1257  )))
1258 1258  
... ... @@ -1265,7 +1265,7 @@
1265 1265  (% _mstvisible="1" %)
1266 1266  (((
1267 1267  (% _mstvisible="2" style="text-align: left;" %)
1268 -(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**Commands special design for LHT65N**
1237 +(% _mstvisible="3" style="color:#4f81bd" %)* **Commands special design for LHT65N**
1269 1269  )))
1270 1270  
1271 1271  (% _mstvisible="1" %)
... ... @@ -1285,7 +1285,7 @@
1285 1285  Feature: Change LoRaWAN End Node Transmit Interval.
1286 1286  
1287 1287  (% _mstvisible="1" style="text-align: left;" %)
1288 -(% _msthash="315244" _msttexthash="241696" style="color:#4f81bd" %)**AT Command: AT+TDC**
1257 +(% style="color:#4f81bd" %)**AT Command: AT+TDC**
1289 1289  
1290 1290  (% _mstvisible="1" %)
1291 1291  [[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
... ... @@ -1296,7 +1296,7 @@
1296 1296  
1297 1297  
1298 1298  (% _mstvisible="2" style="text-align: left;" %)
1299 -(% _msthash="506055" _msttexthash="381992" style="color:#4f81bd" %)**Downlink Command: 0x01**
1268 +(% style="color:#4f81bd" %)**Downlink Command: 0x01**
1300 1300  )))
1301 1301  
1302 1302  (% _mstvisible="1" %)
... ... @@ -1334,7 +1334,7 @@
1334 1334  Feature: Change External Sensor Mode.
1335 1335  
1336 1336  (% _mstvisible="1" style="text-align: left;" %)
1337 -(% _msthash="315245" _msttexthash="248118" style="color:#4f81bd" %)**AT Command: AT+EXT**
1306 +(% style="color:#4f81bd" %)**AT Command: AT+EXT**
1338 1338  
1339 1339  (% _mstvisible="1" %)
1340 1340  [[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
... ... @@ -1345,7 +1345,7 @@
1345 1345  
1346 1346  
1347 1347  (% _mstvisible="2" style="text-align: left;" %)
1348 -(% _msthash="506056" _msttexthash="387855" style="color:#4f81bd" %)**Downlink Command: 0xA2**
1317 +(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
1349 1349  )))
1350 1350  
1351 1351  (% _mstvisible="1" %)
... ... @@ -1395,7 +1395,7 @@
1395 1395  PID is default set to disable (0)
1396 1396  
1397 1397  (% _mstvisible="1" style="text-align: left;" %)
1398 -(% _msthash="315246" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1367 +(% style="color:#4f81bd" %)**AT Command:**
1399 1399  
1400 1400  (% _mstvisible="1" %)
1401 1401  [[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
... ... @@ -1402,15 +1402,12 @@
1402 1402  
1403 1403  
1404 1404  (% _mstvisible="1" style="text-align: left;" %)
1405 -(% _msthash="315247" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1374 +(% style="color:#4f81bd" %)**Downlink Command:**
1406 1406  
1407 1407  (% _mstvisible="1" %)
1408 1408  * 0xA800  **~-~->** AT+PID=0
1409 1409  * 0xA801     **~-~->** AT+PID=1
1410 1410  
1411 -
1412 -
1413 -
1414 1414  (% _mstvisible="1" style="text-align: left;" %)
1415 1415  == (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1416 1416  
... ... @@ -1418,7 +1418,7 @@
1418 1418  Feature: Set device password, max 9 digits
1419 1419  
1420 1420  (% _mstvisible="1" style="text-align: left;" %)
1421 -(% _msthash="315248" _msttexthash="295009" style="color:#4f81bd" %)**AT Command: AT+PWORD**
1387 +(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
1422 1422  
1423 1423  (% _mstvisible="1" %)
1424 1424  [[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
... ... @@ -1429,7 +1429,7 @@
1429 1429  
1430 1430  
1431 1431  (% _mstvisible="2" style="text-align: left;" %)
1432 -(% _msthash="506057" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1398 +(% style="color:#4f81bd" %)**Downlink Command:**
1433 1433  )))
1434 1434  
1435 1435  (% _mstvisible="1" %)
... ... @@ -1448,7 +1448,7 @@
1448 1448  Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1449 1449  
1450 1450  (% _mstvisible="1" style="text-align: left;" %)
1451 -(% _msthash="315249" _msttexthash="289120" style="color:#4f81bd" %)**AT Command: AT+DISAT**
1417 +(% style="color:#4f81bd" %)**AT Command: AT+DISAT**
1452 1452  
1453 1453  (% _mstvisible="1" %)
1454 1454  [[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
... ... @@ -1455,7 +1455,7 @@
1455 1455  
1456 1456  
1457 1457  (% _mstvisible="1" style="text-align: left;" %)
1458 -(% _msthash="315250" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1424 +(% style="color:#4f81bd" %)**Downlink Command:**
1459 1459  
1460 1460  (% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1461 1461  No downlink command for this feature.
... ... @@ -1471,20 +1471,18 @@
1471 1471  * AT+Sleep=1 : Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
1472 1472  
1473 1473  (% _mstvisible="1" style="text-align: left;" %)
1474 -(% _msthash="315251" _msttexthash="289783" style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1440 +(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1475 1475  
1476 1476  (% _mstvisible="1" %)
1477 1477  [[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1478 1478  
1479 1479  (% _mstvisible="1" %)
1480 -(% _msthash="315252" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1446 +(% style="color:#4f81bd" %)**Downlink Command:**
1481 1481  
1482 1482  (% _mstvisible="1" %)
1483 1483  * There is no downlink command to set to Sleep mode.
1484 1484  
1485 1485  
1486 -
1487 -
1488 1488  (% _mstvisible="1" %)
1489 1489  == (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1490 1490  
... ... @@ -1492,7 +1492,7 @@
1492 1492  Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
1493 1493  
1494 1494  (% _mstvisible="1" %)
1495 -(% _msthash="315253" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1459 +(% style="color:#4f81bd" %)**AT Command:**
1496 1496  
1497 1497  (% _mstvisible="1" %)
1498 1498  [[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
... ... @@ -1499,7 +1499,7 @@
1499 1499  
1500 1500  
1501 1501  (% _mstvisible="1" %)
1502 -(% _msthash="315254" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1466 +(% style="color:#4f81bd" %)**Downlink Command:**
1503 1503  
1504 1504  (% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1505 1505  0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
... ... @@ -1523,7 +1523,7 @@
1523 1523  (% _mstvisible="1" %)
1524 1524  (((
1525 1525  (% _mstvisible="2" %)
1526 -(% _msthash="506058" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1490 +(% style="color:#4f81bd" %)**AT Command:**
1527 1527  )))
1528 1528  
1529 1529  (% _mstvisible="1" %)
... ... @@ -1531,7 +1531,7 @@
1531 1531  
1532 1532  
1533 1533  (% _mstvisible="1" %)
1534 -(% _msthash="315255" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1498 +(% style="color:#4f81bd" %)**Downlink Command:**
1535 1535  
1536 1536  (% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1537 1537  0x28 01 ~/~/ Same As AT+SYNCMOD=1
... ... @@ -1547,7 +1547,7 @@
1547 1547  Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1548 1548  
1549 1549  (% _mstvisible="1" %)
1550 -(% _msthash="315256" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1514 +(% style="color:#4f81bd" %)**AT Command:**
1551 1551  
1552 1552  (% _mstvisible="1" %)
1553 1553  [[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
... ... @@ -1554,7 +1554,7 @@
1554 1554  
1555 1555  
1556 1556  (% _mstvisible="1" %)
1557 -(% _msthash="315257" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1521 +(% style="color:#4f81bd" %)**Downlink Command:**
1558 1558  
1559 1559  (% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1560 1560  0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
... ... @@ -1567,7 +1567,7 @@
1567 1567  Feature: Print the sector data from start page to stop page (max is 416 pages).
1568 1568  
1569 1569  (% _mstvisible="1" %)
1570 -(% _msthash="315258" _msttexthash="264953" style="color:#4f81bd" %)**AT Command: AT+PDTA**
1534 +(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
1571 1571  
1572 1572  (% _mstvisible="1" %)
1573 1573  [[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
... ... @@ -1574,7 +1574,7 @@
1574 1574  
1575 1575  
1576 1576  (% _mstvisible="1" %)
1577 -(% _msthash="315259" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1541 +(% style="color:#4f81bd" %)**Downlink Command:**
1578 1578  
1579 1579  (% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1580 1580  No downlink commands for feature
... ... @@ -1587,7 +1587,7 @@
1587 1587  Feature: Print the last few data entries
1588 1588  
1589 1589  (% _mstvisible="1" %)
1590 -(% _msthash="315260" _msttexthash="288522" style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1554 +(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1591 1591  
1592 1592  (% _mstvisible="1" %)
1593 1593  [[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
... ... @@ -1594,7 +1594,7 @@
1594 1594  
1595 1595  
1596 1596  (% _mstvisible="1" %)
1597 -(% _msthash="315261" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1561 +(% style="color:#4f81bd" %)**Downlink Command:**
1598 1598  
1599 1599  (% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1600 1600  No downlink commands for feature
... ... @@ -1607,7 +1607,7 @@
1607 1607  Feature: Clear flash storage for data log feature.
1608 1608  
1609 1609  (% _mstvisible="1" %)
1610 -(% _msthash="315262" _msttexthash="311415" style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1574 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1611 1611  
1612 1612  (% _mstvisible="1" %)
1613 1613  [[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
... ... @@ -1614,7 +1614,7 @@
1614 1614  
1615 1615  
1616 1616  (% _mstvisible="1" %)
1617 -(% _msthash="315263" _msttexthash="388193" style="color:#4f81bd" %)**Downlink Command: 0xA3**
1581 +(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1618 1618  
1619 1619  (% _mstvisible="1" %)
1620 1620  * Example: 0xA301 ~/~/Same as AT+CLRDTA
... ... @@ -1627,7 +1627,7 @@
1627 1627  
1628 1628  
1629 1629  (% _mstvisible="1" %)
1630 -(% _msthash="315264" _msttexthash="334256" style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1594 +(% style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1631 1631  
1632 1632  (% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1633 1633  The default factory setting is 0
... ... @@ -1637,7 +1637,7 @@
1637 1637  (% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1638 1638  
1639 1639  (% _mstvisible="1" %)
1640 -(% _msthash="315265" _msttexthash="383981" style="color:#4f81bd" %)**Downlink Command: 0x34**
1604 +(% style="color:#4f81bd" %)**Downlink Command: 0x34**
1641 1641  
1642 1642  (% _mstvisible="1" %)
1643 1643  * Example: 0x3401 ~/~/Same as AT+PNACKMD=1
... ... @@ -1681,7 +1681,6 @@
1681 1681  (((
1682 1682  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1683 1683  (((
1684 -(% _msthash="736723" _msttexthash="35479028" %)
1685 1685  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1686 1686  [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1687 1687  )))
... ... @@ -1691,354 +1691,209 @@
1691 1691  )))
1692 1692  
1693 1693  (((
1694 -(% _msthash="736724" _msttexthash="12045098" %)
1695 1695  A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1696 1696  )))
1697 1697  
1698 1698  
1699 1699  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1700 -= (% _msthash="183170" _msttexthash="37921" _mstvisible="3" %)6. FAQ(%%) =
1662 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. FAQ(%%) =
1701 1701  
1702 1702  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1703 -== (% _msthash="491075" _msttexthash="437463" %)6.1 How to use AT Command?(%%) ==
1665 +== 6.1 How to use AT Command? ==
1704 1704  
1705 1705  (((
1706 -(% _msthash="736725" _msttexthash="9345674" %)
1707 1707  LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1708 1708  )))
1709 1709  
1710 -[[image:image-20220530085651-1.png||_mstalt="429949"]]
1671 +[[image:image-20220530085651-1.png]]
1711 1711  
1712 1712  
1713 -(% _msthash="506061" _msttexthash="170755" %)**Connection:**
1674 +**Connection:**
1714 1714  
1715 -(% _msthash="506062" _msttexthash="1187732" %)
1716 -**✓ (% style="background-color:yellow" %)USB to TTL GND <~-~->GND(%%)**
1676 +✓** USB to TTL GND <~-~->GND**
1717 1717  
1718 -(% _msthash="506063" _msttexthash="1158313" %)**✓  **(% style="background-color:yellow" %)**USB to TTL RXD <~-~-> D+**
1678 +**✓ USB to TTL RXD <~-~-> D+**
1719 1719  
1720 -(% _msthash="506064" _msttexthash="1175629" %)**✓  **(% style="background-color:yellow" %)**USB to TTL TXD <~-~-> A11**
1680 +**✓ USB to TTL TXD <~-~-> A11**
1721 1721  
1722 -(% _msthash="506065" _msttexthash="1164696" %)**✓  **(% style="background-color:yellow" %)**USB to TTL 3.3V <~-~-> D-**
1682 +**✓ USB to TTL 3.3V <~-~-> D-**
1723 1723  
1724 1724  
1725 1725  (((
1726 -(% _msthash="736726" _msttexthash="67213055" %)
1727 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1686 +In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1728 1728  )))
1729 1729  
1730 1730  (((
1731 -(% _msthash="736727" _msttexthash="1907009" %)
1732 1732  Input password and ATZ to activate LHT65N,As shown below:
1733 1733  )))
1734 1734  
1735 -[[image:image-20220530095701-4.png||_mstalt="430014"]]
1693 +[[image:image-20220530095701-4.png]]
1736 1736  
1737 1737  
1738 -(% _msthash="506066" _msttexthash="544869" %)
1739 1739  AT Command List is as below:
1740 1740  
1741 -(% _msthash="506067" _msttexthash="361920" %)
1742 1742  AT+<CMD>? :  Help on <CMD>
1743 1743  
1744 -(% _msthash="506068" _msttexthash="243061" %)
1745 1745  AT+<CMD> :  Run <CMD>
1746 1746  
1747 -(% _msthash="506069" _msttexthash="704197" %)
1748 1748  AT+<CMD>=<value> :  Set the value
1749 1749  
1750 -(% _msthash="506070" _msttexthash="455676" %)
1751 1751  AT+<CMD>=? :  Get the value
1752 1752  
1753 -(% _msthash="506071" _msttexthash="670553" %)
1754 1754  AT+DEBUG:  Set more info output
1755 1755  
1756 -(% _msthash="506072" _msttexthash="485888" %)
1757 1757  ATZ:  Trig a reset of the MCU
1758 1758  
1759 -(% _msthash="506073" _msttexthash="2068872" %)
1760 1760  AT+FDR:  Reset Parameters to Factory Default, Keys Reserve
1761 1761  
1762 -(% _msthash="506074" _msttexthash="689169" %)
1763 1763  AT+DEUI:  Get or Set the Device EUI
1764 1764  
1765 -(% _msthash="506075" _msttexthash="960414" %)
1766 1766  AT+DADDR:  Get or Set the Device Address
1767 1767  
1768 -(% _msthash="506076" _msttexthash="1079897" %)
1769 1769  AT+APPKEY:  Get or Set the Application Key
1770 1770  
1771 -(% _msthash="506077" _msttexthash="1326143" %)
1772 1772  AT+NWKSKEY:  Get or Set the Network Session Key
1773 1773  
1774 -(% _msthash="506078" _msttexthash="1573000" %)
1775 1775  AT+APPSKEY:  Get or Set the Application Session Key
1776 1776  
1777 -(% _msthash="506079" _msttexthash="1041729" %)
1778 1778  AT+APPEUI:  Get or Set the Application EUI
1779 1779  
1780 -(% _msthash="506080" _msttexthash="2104206" %)
1781 1781  AT+ADR:  Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1782 1782  
1783 -(% _msthash="506081" _msttexthash="3369288" %)
1784 1784  AT+TXP:  Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1785 1785  
1786 -(% _msthash="506082" _msttexthash="1894529" %)
1787 1787  AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
1788 1788  
1789 -(% _msthash="506083" _msttexthash="3864172" %)
1790 1790  AT+DCS:  Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1791 1791  
1792 -(% _msthash="506084" _msttexthash="1712204" %)
1793 1793  AT+PNM:  Get or Set the public network mode. (0: off, 1: on)
1794 1794  
1795 -(% _msthash="506085" _msttexthash="1281202" %)
1796 1796  AT+RX2FQ:  Get or Set the Rx2 window frequency
1797 1797  
1798 -(% _msthash="506086" _msttexthash="2796781" %)
1799 1799  AT+RX2DR:  Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1800 1800  
1801 -(% _msthash="506087" _msttexthash="3285165" %)
1802 1802  AT+RX1DL:  Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1803 1803  
1804 -(% _msthash="506088" _msttexthash="3286179" %)
1805 1805  AT+RX2DL:  Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1806 1806  
1807 -(% _msthash="506089" _msttexthash="4703803" %)
1808 1808  AT+JN1DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1809 1809  
1810 -(% _msthash="506090" _msttexthash="4704999" %)
1811 1811  AT+JN2DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1812 1812  
1813 -(% _msthash="506091" _msttexthash="1528683" %)
1814 1814  AT+NJM:  Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1815 1815  
1816 -(% _msthash="506092" _msttexthash="757185" %)
1817 1817  AT+NWKID:  Get or Set the Network ID
1818 1818  
1819 -(% _msthash="506093" _msttexthash="1156597" %)
1820 1820  AT+FCU:  Get or Set the Frame Counter Uplink
1821 1821  
1822 -(% _msthash="506094" _msttexthash="1273987" %)
1823 1823  AT+FCD:  Get or Set the Frame Counter Downlink
1824 1824  
1825 -(% _msthash="506095" _msttexthash="859222" %)
1826 1826  AT+CLASS:  Get or Set the Device Class
1827 1827  
1828 -(% _msthash="506096" _msttexthash="384852" %)
1829 1829  AT+JOIN:  Join network
1830 1830  
1831 -(% _msthash="506097" _msttexthash="548626" %)
1832 1832  AT+NJS:  Get the join status
1833 1833  
1834 -(% _msthash="506098" _msttexthash="2546206" %)
1835 1835  AT+SENDB:  Send hexadecimal data along with the application port
1836 1836  
1837 -(% _msthash="506099" _msttexthash="1932307" %)
1838 1838  AT+SEND:  Send text data along with the application port
1839 1839  
1840 -(% _msthash="506100" _msttexthash="3560557" %)
1841 1841  AT+RECVB:  Print last received data in binary format (with hexadecimal values)
1842 1842  
1843 -(% _msthash="506101" _msttexthash="1429701" %)
1844 1844  AT+RECV:  Print last received data in raw format
1845 1845  
1846 -(% _msthash="506102" _msttexthash="1735981" %)
1847 1847  AT+VER:  Get current image version and Frequency Band
1848 1848  
1849 -(% _msthash="506103" _msttexthash="1189474" %)
1850 1850  AT+CFM:  Get or Set the confirmation mode (0-1)
1851 1851  
1852 -(% _msthash="506104" _msttexthash="1718210" %)
1853 1853  AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
1854 1854  
1855 -(% _msthash="506105" _msttexthash="1339403" %)
1856 1856  AT+SNR:  Get the SNR of the last received packet
1857 1857  
1858 -(% _msthash="506106" _msttexthash="1452009" %)
1859 1859  AT+RSSI:  Get the RSSI of the last received packet
1860 1860  
1861 -(% _msthash="506107" _msttexthash="2768142" %)
1862 1862  AT+TDC:  Get or set the application data transmission interval in ms
1863 1863  
1864 -(% _msthash="506108" _msttexthash="1083914" %)
1865 1865  AT+PORT:  Get or set the application port
1866 1866  
1867 -(% _msthash="506109" _msttexthash="622440" %)
1868 1868  AT+DISAT:  Disable AT commands
1869 1869  
1870 -(% _msthash="506110" _msttexthash="868361" %)
1871 1871  AT+PWORD:  Set password, max 9 digits
1872 1872  
1873 -(% _msthash="506111" _msttexthash="2210299" %)
1874 1874  AT+CHS:  Get or Set Frequency (Unit: Hz) for Single Channel Mode
1875 1875  
1876 -(% _msthash="506112" _msttexthash="2113462" %)
1877 1877  AT+CHE:  Get or Set eight channels mode,Only for US915,AU915,CN470
1878 1878  
1879 -(% _msthash="506113" _msttexthash="2087423" %)
1880 1880  AT+PDTA:  Print the sector data from start page to stop page
1881 1881  
1882 -(% _msthash="506114" _msttexthash="1063127" %)
1883 1883  AT+PLDTA:  Print the last few sets of data
1884 1884  
1885 -(% _msthash="506115" _msttexthash="1999426" %)
1886 1886  AT+CLRDTA:  Clear the storage, record position back to 1st
1887 1887  
1888 -(% _msthash="506116" _msttexthash="442130" %)
1889 1889  AT+SLEEP:  Set sleep mode
1890 1890  
1891 -(% _msthash="506117" _msttexthash="1080222" %)
1892 1892  AT+EXT:  Get or Set external sensor model
1893 1893  
1894 -(% _msthash="506118" _msttexthash="1309490" %)
1895 1895  AT+BAT:  Get the current battery voltage in mV
1896 1896  
1897 -(% _msthash="506119" _msttexthash="813891" %)
1898 1898  AT+CFG:  Print all configurations
1899 1899  
1900 -(% _msthash="506120" _msttexthash="551707" %)
1901 1901  AT+WMOD:  Get or Set Work Mode
1902 1902  
1903 -(% _msthash="506121" _msttexthash="2631499" %)
1904 1904  AT+ARTEMP:  Get or set the internal Temperature sensor alarm range
1905 1905  
1906 -(% _msthash="506122" _msttexthash="3907150" %)
1907 1907  AT+CITEMP:  Get or set the internal Temperature sensor collection interval in min
1908 1908  
1909 -(% _msthash="506123" _msttexthash="854620" %)
1910 1910  AT+SETCNT:  Set the count at present
1911 1911  
1912 -(% _msthash="506124" _msttexthash="2554877" %)
1913 1913  AT+RJTDC:  Get or set the ReJoin data transmission interval in min
1914 1914  
1915 -(% _msthash="506125" _msttexthash="771849" %)
1916 1916  AT+RPL:  Get or set response level
1917 1917  
1918 -(% _msthash="506126" _msttexthash="1484314" %)
1919 1919  AT+TIMESTAMP:  Get or Set UNIX timestamp in second
1920 1920  
1921 -(% _msthash="506127" _msttexthash="741728" %)
1922 1922  AT+LEAPSEC:  Get or Set Leap Second
1923 1923  
1924 -(% _msthash="506128" _msttexthash="1694017" %)
1925 1925  AT+SYNCMOD:  Get or Set time synchronization method
1926 1926  
1927 -(% _msthash="506129" _msttexthash="2235948" %)
1928 1928  AT+SYNCTDC:  Get or set time synchronization interval in day
1929 1929  
1930 -(% _msthash="506130" _msttexthash="425542" %)
1931 1931  AT+PID:  Get or set the PID
1932 1932  
1933 1933  
1934 -== (% _msthash="1616654" _msttexthash="1555359" %)6.2 Where to use AT commands and Downlink commands(%%) ==
1827 +== 6.2 Where to use AT commands and Downlink commands ==
1935 1935  
1936 -(% _msthash="506131" _msttexthash="14585714" %)
1937 1937  AT commands：
1938 1938  
1939 -[[image:image-20220615092034-1.png||_mstalt="428870"]]
1831 +[[image:image-20220615092034-1.png]]
1940 1940  
1941 -(% _msthash="506132" _msttexthash="337922" %)
1942 1942  Downlink commands:
1943 1943  
1835 +TTN:
1944 1944  
1945 -(% _msthash="506133" _msttexthash="33046" %)
1946 -**TTN:**
1837 +[[image:image-20220615092124-2.png||height="843" width="893"]]
1947 1947  
1948 -[[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
1839 +Helium：
1949 1949  
1841 +[[image:image-20220615092551-3.png||height="556" width="1097"]]
1950 1950  
1951 -(% _msthash="506134" _msttexthash="11113791" %)
1952 -**Helium：**
1843 +Chirpstack:The downlink window will not be displayed until the network is accessed
1953 1953  
1954 -[[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
1845 +[[image:image-20220615094850-6.png]]
1955 1955  
1847 +[[image:image-20220615094904-7.png||height="329" width="1067"]]
1956 1956  
1957 -(% _msthash="506135" _msttexthash="4159844" %)
1958 -**Chirpstack:The downlink window will not be displayed until the network is accessed**
1849 +Aws:
1959 1959  
1960 -[[image:image-20220615094850-6.png||_mstalt="433082"]]
1851 +[[image:image-20220615092939-4.png||height="532" width="1062"]]
1961 1961  
1962 -[[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
1853 +== 6.3 How to change the uplink interval？ ==
1963 1963  
1964 -
1965 -(% _msthash="506136" _msttexthash="39286" %)
1966 -**Aws:**
1967 -
1968 -[[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
1969 -
1970 -
1971 -== (% _msthash="1220570" _msttexthash="33199257" %)6.3 How to change the uplink interval？(%%) ==
1972 -
1973 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/||_msthash="506137" _msttexthash="5712018"]]
1974 -
1975 -
1976 -(% _msthash="536757" _msttexthash="1874951" %)
1977 -== 6.4 How to use TTL-USB to connect a PC to input AT commands? ==
1978 -
1979 -[[image:image-20220615153355-1.png]]
1980 -
1981 -(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1982 -
1983 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1984 -
1985 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1986 -
1987 -[[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1988 -
1989 -
1990 -(((
1991 -(% _msthash="736728" _msttexthash="67213055" %)
1992 -(((
1993 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1855 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/]]
1994 1994  )))
1995 -)))
1996 1996  
1997 -(((
1998 -(% _msthash="736729" _msttexthash="1907009" %)
1999 -Input password and ATZ to activate LHT65N,As shown below:
2000 -
2001 -[[image:image-20220615154519-3.png]]
2002 -
2003 -
2004 -)))
2005 -
2006 -
2007 -== 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
2008 -
2009 -[[image:image-20220615153355-1.png]]
2010 -
2011 -(% style="background-color:yellow" %)**4  < - ->  3.3V  < - ->  Blue**
2012 -
2013 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
2014 -
2015 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
2016 -
2017 -Use after connection， ground wire（1 < - -> GND  < - ->  Black） for 1s and then pull it out.Then restart the device.
2018 -
2019 -
2020 -(% _mstmutation="1" %)**Step1**(%%): Install TremoProgrammer  first.
2021 -
2022 -[[image:image-20220615170542-5.png]]
2023 -
2024 -
2025 -(% _msthash="506146" _msttexthash="52173160" %)
2026 -(% _istranslated="1" %)**Step2**(%%)：Download the LHT65N image files.
2027 -
2028 -
2029 -(% _msthash="506147" _msttexthash="188083584" %)
2030 -(% _istranslated="1" %)**Step3：**(%%)Select the serial port and baud rate of the device and the firmware to be upgraded.
2031 -
2032 -[[image:image-20220615171334-6.png]]
2033 -
2034 -
2035 -(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2036 -
2037 -
2038 -)))
2039 -
2040 2040  (% _mstvisible="1" %)
2041 -= (% _msthash="183170" _msttexthash="13740740" _mstvisible="3" %)7. (%%)Order Info =
1859 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)7. Order Info(%%) =
2042 2042  
2043 2043  (% _mstvisible="1" %)
2044 2044  (((
... ... @@ -2056,42 +2056,42 @@
2056 2056  * (% _mstvisible="3" %)
2057 2057  (((
2058 2058  (% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
2059 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1877 +(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
2060 2060  )))
2061 2061  * (% _mstvisible="3" %)
2062 2062  (((
2063 2063  (% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
2064 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1882 +(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
2065 2065  )))
2066 2066  * (% _mstvisible="3" %)
2067 2067  (((
2068 2068  (% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
2069 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1887 +(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
2070 2070  )))
2071 2071  * (% _mstvisible="3" %)
2072 2072  (((
2073 2073  (% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
2074 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1892 +(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
2075 2075  )))
2076 2076  * (% _mstvisible="3" %)
2077 2077  (((
2078 2078  (% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
2079 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1897 +(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
2080 2080  )))
2081 2081  * (% _mstvisible="3" %)
2082 2082  (((
2083 2083  (% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
2084 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1902 +(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
2085 2085  )))
2086 2086  * (% _mstvisible="3" %)
2087 2087  (((
2088 2088  (% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
2089 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1907 +(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
2090 2090  )))
2091 2091  * (% _mstvisible="3" %)
2092 2092  (((
2093 2093  (% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
2094 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1912 +(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
2095 2095  )))
2096 2096  
2097 2097  (% _mstvisible="1" %)
... ... @@ -2104,7 +2104,7 @@
2104 2104  * (% _mstvisible="3" %)
2105 2105  (((
2106 2106  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2107 -(% style="color:red" %)**E3**(%%): External Temperature Probe
1925 +(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
2108 2108  
2109 2109  
2110 2110  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
... ... @@ -2112,7 +2112,7 @@
2112 2112  )))
2113 2113  
2114 2114  (% _mstvisible="1" %)
2115 -= (% _msthash="233363" _msttexthash="13823550" _mstvisible="3" %)8. (%%)Packing Info =
1933 += (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)8. Packing Info(%%) =
2116 2116  
2117 2117  (% _mstvisible="1" %)
2118 2118  (((
... ... @@ -2131,6 +2131,11 @@
2131 2131  )))
2132 2132  * (% _mstvisible="3" %)
2133 2133  (((
1952 +(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
1953 +Program cable x 1
1954 +)))
1955 +* (% _mstvisible="3" %)
1956 +(((
2134 2134  (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2135 2135  Optional external sensor
2136 2136  )))
... ... @@ -2145,30 +2145,34 @@
2145 2145  * (% _mstvisible="3" %)
2146 2146  (((
2147 2147  (% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
2148 -Device Size:  10 x 10 x 3.5 cm
1971 +Device Size:  13.5 x 7 x 3 cm
2149 2149  )))
2150 2150  * (% _mstvisible="3" %)
2151 2151  (((
2152 2152  (% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
2153 -Device Weight: 120.5g
1976 +Device Weight: 105g
2154 2154  )))
2155 -
2156 -(% _mstvisible="3" %)
1978 +* (% _mstvisible="3" %)
2157 2157  (((
2158 -
1980 +(% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
1981 +Package Size / pcs : 14.5 x 8 x 5 cm
1982 +)))
1983 +* (% _mstvisible="3" %)
1984 +(((
1985 +(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1986 +Weight / pcs : 170g
2159 2159  
1988 +
2160 2160  (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2161 2161  
2162 2162  )))
2163 2163  
2164 -= (% _msthash="184782" _msttexthash="16007771" %)9. Reference material(%%) =
1993 += 9. Reference =
2165 2165  
2166 -* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor||_msthash="504975" _msttexthash="51420512"]]
1995 +* [[Datasheet, Photos, Decoder, Firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor]]
2167 2167  
1997 += 10. FCC Warning =
2168 2168  
2169 -
2170 -= (% _msthash="216320" _msttexthash="10002096" %)10. (%%)FCC Warning =
2171 -
2172 2172  (% _mstvisible="1" %)
2173 2173  (((
2174 2174  (% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
image-20220617150003-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content