Skip to Content
Last modified by Mengting Qiu on 2025/07/03 14:48
From version 148.16
edited by Xiaoling
on 2022/06/17 15:07
Change comment: There is no comment for this version
To version 133.1
edited by Bei Jinggeng
on 2022/06/15 11:46
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220613162008-1.png||_mstalt="428142" height="579" width="379"]]
2 +[[image:image-20220613162008-1.png||height="579" width="379"]]
3 3  
4 4  
5 5  
... ... @@ -22,9 +22,6 @@
22 22  (% _mstvisible="1" %)
23 23  (((
24 24  (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 -
26 -
27 -(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 28  The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
29 29  )))
30 30  
... ... @@ -77,9 +77,6 @@
77 77  * Tri-color LED to indicate working status
78 78  * Datalog feature
79 79  
80 -
81 -
82 -
83 83  (% _mstvisible="1" %)
84 84  == (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
85 85  
... ... @@ -208,8 +208,8 @@
208 208  The LHT65N has two working modes:
209 209  
210 210  (% _mstvisible="1" %)
211 -* (% style="color:blue" %)**Deep Sleep Mode**(%%): LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
212 -* (% style="color:blue" %)**Working Mode**(%%):  In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65N will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
205 +* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
206 +* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
213 213  
214 214  (% _mstvisible="1" %)
215 215  (((
... ... @@ -247,7 +247,7 @@
247 247  Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
248 248  
249 249  (% _mstvisible="1" %)
250 -[[image:image-20220617150003-1.jpeg]]
244 +[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
251 251  
252 252  (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
253 253  User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
... ... @@ -368,9 +368,6 @@
368 368  * The 7th byte (EXT #): defines the external sensor model.
369 369  * The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
370 370  
371 -
372 -
373 -
374 374  (% _mstvisible="1" %)
375 375  === (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
376 376  
... ... @@ -407,9 +407,6 @@
407 407  * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
408 408  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
409 409  
410 -
411 -
412 -
413 413  (% _mstvisible="1" %)
414 414  === (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
415 415  
... ... @@ -425,9 +425,6 @@
425 425  (% _mstvisible="1" %)
426 426  * Temperature:  (0xF5C6-65536)/100=-26.18℃
427 427  
428 -
429 -
430 -
431 431  (% _mstvisible="1" %)
432 432  === (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
433 433  
... ... @@ -437,9 +437,6 @@
437 437  (% _mstvisible="1" %)
438 438  * Humidity:    0x025C/10=60.4%
439 439  
440 -
441 -
442 -
443 443  (% _mstvisible="1" %)
444 444  === (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
445 445  
... ... @@ -608,8 +608,6 @@
608 608  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
609 609  
610 610  
611 -
612 -
613 613  (% _mstvisible="1" %)
614 614  == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
615 615  
... ... @@ -674,7 +674,6 @@
674 674  
675 675  
676 676  
677 -
678 678  (% _mstvisible="1" %)
679 679  === (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
680 680  
... ... @@ -1064,25 +1064,18 @@
1064 1064  (% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
1065 1065  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1066 1066  
1067 -(% _msthash="315237" _msttexthash="1385839" %)
1068 1068  Where the first 11 bytes is for the first entry:
1069 1069  
1070 -(% _msthash="315238" _msttexthash="274846" %)
1071 1071  7FFF089801464160065F97
1072 1072  
1073 -(% _msthash="315239" _msttexthash="617435" %)
1074 1074  Ext sensor data=0x7FFF/100=327.67
1075 1075  
1076 -(% _msthash="315240" _msttexthash="270543" %)
1077 1077  Temp=0x0898/100=22.00
1078 1078  
1079 -(% _msthash="315241" _msttexthash="211783" %)
1080 1080  Hum=0x0146/10=32.6
1081 1081  
1082 -(% _msthash="315242" _msttexthash="1569776" %)
1083 1083  poll message flag & Ext=0x41,means reply data,Ext=1
1084 1084  
1085 -(% _msthash="315243" _msttexthash="1120509" %)
1086 1086  Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1087 1087  
1088 1088  
... ... @@ -1104,19 +1104,19 @@
1104 1104  (% _mstvisible="1" class="box infomessage" %)
1105 1105  (((
1106 1106  (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1107 -(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%):  Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1079 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1108 1108  
1109 1109  (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1110 -(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%):  The interval between checking the alarm temperature. (In minutes)
1082 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1111 1111  
1112 1112  (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1113 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%):  Gets or sets the alarm range of the internal temperature sensor
1085 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1114 1114  
1115 1115  (% _mstvisible="2" style="text-align: left;" %)
1116 -(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%):  Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1088 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1117 1117  
1118 1118  (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1119 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%):  Set the internal temperature sensor alarm range from 45 to 105.
1091 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1120 1120  )))
1121 1121  
1122 1122  
... ... @@ -1159,6 +1159,9 @@
1159 1159  For each success downlink, the PURPLE LED will blink once
1160 1160  
1161 1161  
1134 +
1135 +
1136 +(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1162 1162  
1163 1163  )))
1164 1164  
... ... @@ -1173,7 +1173,7 @@
1173 1173  = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1174 1174  
1175 1175  (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1176 -== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E3 Temperature Probe(%%) ==
1151 +== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
1177 1177  
1178 1178  (% _mstvisible="1" %)
1179 1179  [[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
... ... @@ -1192,7 +1192,6 @@
1192 1192  
1193 1193  
1194 1194  
1195 -
1196 1196  (% _mstvisible="1" style="text-align: left;" %)
1197 1197  = (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1198 1198  
... ... @@ -1210,7 +1210,7 @@
1210 1210  )))
1211 1211  * (% _mstvisible="3" %)
1212 1212  (((
1213 -(% _msthash="903319" _msttexthash="3225859" _mstvisible="4" %)
1187 +(% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
1214 1214  LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
1215 1215  )))
1216 1216  
... ... @@ -1229,7 +1229,7 @@
1229 1229  (% _mstvisible="1" %)
1230 1230  (((
1231 1231  (% _mstvisible="2" style="text-align: left;" %)
1232 -(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1206 +(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1233 1233  )))
1234 1234  
1235 1235  (% _mstvisible="1" %)
... ... @@ -1252,7 +1252,7 @@
1252 1252  
1253 1253  (% _mstvisible="1" %)
1254 1254  (((
1255 -(% _msthash="506251" _msttexthash="12349142" _mstvisible="2" style="text-align: left;" %)
1229 +(% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
1256 1256  They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1257 1257  )))
1258 1258  
... ... @@ -1265,7 +1265,7 @@
1265 1265  (% _mstvisible="1" %)
1266 1266  (((
1267 1267  (% _mstvisible="2" style="text-align: left;" %)
1268 -(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**Commands special design for LHT65N**
1242 +(% _mstvisible="3" style="color:#4f81bd" %)* **Commands special design for LHT65N**
1269 1269  )))
1270 1270  
1271 1271  (% _mstvisible="1" %)
... ... @@ -1285,7 +1285,7 @@
1285 1285  Feature: Change LoRaWAN End Node Transmit Interval.
1286 1286  
1287 1287  (% _mstvisible="1" style="text-align: left;" %)
1288 -(% _msthash="315244" _msttexthash="241696" style="color:#4f81bd" %)**AT Command: AT+TDC**
1262 +(% style="color:#4f81bd" %)**AT Command: AT+TDC**
1289 1289  
1290 1290  (% _mstvisible="1" %)
1291 1291  [[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
... ... @@ -1296,7 +1296,7 @@
1296 1296  
1297 1297  
1298 1298  (% _mstvisible="2" style="text-align: left;" %)
1299 -(% _msthash="506055" _msttexthash="381992" style="color:#4f81bd" %)**Downlink Command: 0x01**
1273 +(% style="color:#4f81bd" %)**Downlink Command: 0x01**
1300 1300  )))
1301 1301  
1302 1302  (% _mstvisible="1" %)
... ... @@ -1334,7 +1334,7 @@
1334 1334  Feature: Change External Sensor Mode.
1335 1335  
1336 1336  (% _mstvisible="1" style="text-align: left;" %)
1337 -(% _msthash="315245" _msttexthash="248118" style="color:#4f81bd" %)**AT Command: AT+EXT**
1311 +(% style="color:#4f81bd" %)**AT Command: AT+EXT**
1338 1338  
1339 1339  (% _mstvisible="1" %)
1340 1340  [[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
... ... @@ -1345,7 +1345,7 @@
1345 1345  
1346 1346  
1347 1347  (% _mstvisible="2" style="text-align: left;" %)
1348 -(% _msthash="506056" _msttexthash="387855" style="color:#4f81bd" %)**Downlink Command: 0xA2**
1322 +(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
1349 1349  )))
1350 1350  
1351 1351  (% _mstvisible="1" %)
... ... @@ -1395,7 +1395,7 @@
1395 1395  PID is default set to disable (0)
1396 1396  
1397 1397  (% _mstvisible="1" style="text-align: left;" %)
1398 -(% _msthash="315246" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1372 +(% style="color:#4f81bd" %)**AT Command:**
1399 1399  
1400 1400  (% _mstvisible="1" %)
1401 1401  [[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
... ... @@ -1402,12 +1402,14 @@
1402 1402  
1403 1403  
1404 1404  (% _mstvisible="1" style="text-align: left;" %)
1405 -(% _msthash="315247" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1379 +(% style="color:#4f81bd" %)**Downlink Command:**
1406 1406  
1407 1407  (% _mstvisible="1" %)
1408 1408  * 0xA800  **~-~->** AT+PID=0
1409 1409  * 0xA801     **~-~->** AT+PID=1
1410 1410  
1385 +
1386 +
1411 1411  (% _mstvisible="1" style="text-align: left;" %)
1412 1412  == (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1413 1413  
... ... @@ -1415,7 +1415,7 @@
1415 1415  Feature: Set device password, max 9 digits
1416 1416  
1417 1417  (% _mstvisible="1" style="text-align: left;" %)
1418 -(% _msthash="315248" _msttexthash="295009" style="color:#4f81bd" %)**AT Command: AT+PWORD**
1394 +(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
1419 1419  
1420 1420  (% _mstvisible="1" %)
1421 1421  [[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
... ... @@ -1426,7 +1426,7 @@
1426 1426  
1427 1427  
1428 1428  (% _mstvisible="2" style="text-align: left;" %)
1429 -(% _msthash="506057" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1405 +(% style="color:#4f81bd" %)**Downlink Command:**
1430 1430  )))
1431 1431  
1432 1432  (% _mstvisible="1" %)
... ... @@ -1445,7 +1445,7 @@
1445 1445  Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1446 1446  
1447 1447  (% _mstvisible="1" style="text-align: left;" %)
1448 -(% _msthash="315249" _msttexthash="289120" style="color:#4f81bd" %)**AT Command: AT+DISAT**
1424 +(% style="color:#4f81bd" %)**AT Command: AT+DISAT**
1449 1449  
1450 1450  (% _mstvisible="1" %)
1451 1451  [[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
... ... @@ -1452,7 +1452,7 @@
1452 1452  
1453 1453  
1454 1454  (% _mstvisible="1" style="text-align: left;" %)
1455 -(% _msthash="315250" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1431 +(% style="color:#4f81bd" %)**Downlink Command:**
1456 1456  
1457 1457  (% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1458 1458  No downlink command for this feature.
... ... @@ -1464,21 +1464,21 @@
1464 1464  (% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
1465 1465  Feature: Set device to sleep mode
1466 1466  
1467 -* AT+Sleep=0  : Normal working mode, device will sleep and use lower power when there is no LoRa message
1468 -* AT+Sleep=1 : Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
1469 -
1470 1470  (% _mstvisible="1" style="text-align: left;" %)
1471 -(% _msthash="315251" _msttexthash="289783" style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1444 +(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1472 1472  
1473 1473  (% _mstvisible="1" %)
1474 1474  [[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1475 1475  
1449 +
1476 1476  (% _mstvisible="1" %)
1477 -(% _msthash="315252" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1451 +(% style="color:#4f81bd" %)**Downlink Command:**
1478 1478  
1479 1479  (% _mstvisible="1" %)
1480 1480  * There is no downlink command to set to Sleep mode.
1481 1481  
1456 +
1457 +
1482 1482  (% _mstvisible="1" %)
1483 1483  == (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1484 1484  
... ... @@ -1486,7 +1486,7 @@
1486 1486  Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
1487 1487  
1488 1488  (% _mstvisible="1" %)
1489 -(% _msthash="315253" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1465 +(% style="color:#4f81bd" %)**AT Command:**
1490 1490  
1491 1491  (% _mstvisible="1" %)
1492 1492  [[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
... ... @@ -1493,7 +1493,7 @@
1493 1493  
1494 1494  
1495 1495  (% _mstvisible="1" %)
1496 -(% _msthash="315254" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1472 +(% style="color:#4f81bd" %)**Downlink Command:**
1497 1497  
1498 1498  (% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1499 1499  0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
... ... @@ -1517,7 +1517,7 @@
1517 1517  (% _mstvisible="1" %)
1518 1518  (((
1519 1519  (% _mstvisible="2" %)
1520 -(% _msthash="506058" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1496 +(% style="color:#4f81bd" %)**AT Command:**
1521 1521  )))
1522 1522  
1523 1523  (% _mstvisible="1" %)
... ... @@ -1525,7 +1525,7 @@
1525 1525  
1526 1526  
1527 1527  (% _mstvisible="1" %)
1528 -(% _msthash="315255" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1504 +(% style="color:#4f81bd" %)**Downlink Command:**
1529 1529  
1530 1530  (% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1531 1531  0x28 01 ~/~/ Same As AT+SYNCMOD=1
... ... @@ -1541,7 +1541,7 @@
1541 1541  Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1542 1542  
1543 1543  (% _mstvisible="1" %)
1544 -(% _msthash="315256" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1520 +(% style="color:#4f81bd" %)**AT Command:**
1545 1545  
1546 1546  (% _mstvisible="1" %)
1547 1547  [[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
... ... @@ -1548,7 +1548,7 @@
1548 1548  
1549 1549  
1550 1550  (% _mstvisible="1" %)
1551 -(% _msthash="315257" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1527 +(% style="color:#4f81bd" %)**Downlink Command:**
1552 1552  
1553 1553  (% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1554 1554  0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
... ... @@ -1561,7 +1561,7 @@
1561 1561  Feature: Print the sector data from start page to stop page (max is 416 pages).
1562 1562  
1563 1563  (% _mstvisible="1" %)
1564 -(% _msthash="315258" _msttexthash="264953" style="color:#4f81bd" %)**AT Command: AT+PDTA**
1540 +(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
1565 1565  
1566 1566  (% _mstvisible="1" %)
1567 1567  [[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
... ... @@ -1568,7 +1568,7 @@
1568 1568  
1569 1569  
1570 1570  (% _mstvisible="1" %)
1571 -(% _msthash="315259" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1547 +(% style="color:#4f81bd" %)**Downlink Command:**
1572 1572  
1573 1573  (% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1574 1574  No downlink commands for feature
... ... @@ -1581,7 +1581,7 @@
1581 1581  Feature: Print the last few data entries
1582 1582  
1583 1583  (% _mstvisible="1" %)
1584 -(% _msthash="315260" _msttexthash="288522" style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1560 +(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1585 1585  
1586 1586  (% _mstvisible="1" %)
1587 1587  [[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
... ... @@ -1588,7 +1588,7 @@
1588 1588  
1589 1589  
1590 1590  (% _mstvisible="1" %)
1591 -(% _msthash="315261" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1567 +(% style="color:#4f81bd" %)**Downlink Command:**
1592 1592  
1593 1593  (% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1594 1594  No downlink commands for feature
... ... @@ -1601,7 +1601,7 @@
1601 1601  Feature: Clear flash storage for data log feature.
1602 1602  
1603 1603  (% _mstvisible="1" %)
1604 -(% _msthash="315262" _msttexthash="311415" style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1580 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1605 1605  
1606 1606  (% _mstvisible="1" %)
1607 1607  [[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
... ... @@ -1608,11 +1608,13 @@
1608 1608  
1609 1609  
1610 1610  (% _mstvisible="1" %)
1611 -(% _msthash="315263" _msttexthash="388193" style="color:#4f81bd" %)**Downlink Command: 0xA3**
1587 +(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1612 1612  
1613 1613  (% _mstvisible="1" %)
1614 1614  * Example: 0xA301 ~/~/Same as AT+CLRDTA
1615 1615  
1592 +
1593 +
1616 1616  (% _mstvisible="1" %)
1617 1617  == (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1618 1618  
... ... @@ -1621,7 +1621,7 @@
1621 1621  
1622 1622  
1623 1623  (% _mstvisible="1" %)
1624 -(% _msthash="315264" _msttexthash="334256" style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1602 +(% style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1625 1625  
1626 1626  (% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1627 1627  The default factory setting is 0
... ... @@ -1631,11 +1631,13 @@
1631 1631  (% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1632 1632  
1633 1633  (% _mstvisible="1" %)
1634 -(% _msthash="315265" _msttexthash="383981" style="color:#4f81bd" %)**Downlink Command: 0x34**
1612 +(% style="color:#4f81bd" %)**Downlink Command: 0x34**
1635 1635  
1636 1636  (% _mstvisible="1" %)
1637 1637  * Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1638 1638  
1617 +
1618 +
1639 1639  (% _mstvisible="1" %)
1640 1640  = (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1641 1641  
... ... @@ -1675,7 +1675,6 @@
1675 1675  (((
1676 1676  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1677 1677  (((
1678 -(% _msthash="736723" _msttexthash="35479028" %)
1679 1679  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1680 1680  [[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1681 1681  )))
... ... @@ -1685,354 +1685,209 @@
1685 1685  )))
1686 1686  
1687 1687  (((
1688 -(% _msthash="736724" _msttexthash="12045098" %)
1689 1689  A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1690 1690  )))
1691 1691  
1692 1692  
1693 1693  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1694 -= (% _msthash="183170" _msttexthash="37921" _mstvisible="3" %)6. FAQ(%%) =
1672 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. FAQ(%%) =
1695 1695  
1696 1696  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1697 -== (% _msthash="491075" _msttexthash="437463" %)6.1 How to use AT Command?(%%) ==
1675 +== 6.1 How to use AT Command? ==
1698 1698  
1699 1699  (((
1700 -(% _msthash="736725" _msttexthash="9345674" %)
1701 1701  LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1702 1702  )))
1703 1703  
1704 -[[image:image-20220530085651-1.png||_mstalt="429949"]]
1681 +[[image:image-20220530085651-1.png]]
1705 1705  
1706 1706  
1707 -(% _msthash="506061" _msttexthash="170755" %)**Connection:**
1684 +**Connection:**
1708 1708  
1709 -(% _msthash="506062" _msttexthash="1187732" %)
1710 -**✓ (% style="background-color:yellow" %)USB to TTL GND <~-~->GND(%%)**
1686 +✓** USB to TTL GND <~-~->GND**
1711 1711  
1712 -(% _msthash="506063" _msttexthash="1158313" %)**✓  **(% style="background-color:yellow" %)**USB to TTL RXD <~-~-> D+**
1688 +**✓ USB to TTL RXD <~-~-> D+**
1713 1713  
1714 -(% _msthash="506064" _msttexthash="1175629" %)**✓  **(% style="background-color:yellow" %)**USB to TTL TXD <~-~-> A11**
1690 +**✓ USB to TTL TXD <~-~-> A11**
1715 1715  
1716 -(% _msthash="506065" _msttexthash="1164696" %)**✓  **(% style="background-color:yellow" %)**USB to TTL 3.3V <~-~-> D-**
1692 +**✓ USB to TTL 3.3V <~-~-> D-**
1717 1717  
1718 1718  
1719 1719  (((
1720 -(% _msthash="736726" _msttexthash="67213055" %)
1721 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1696 +In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1722 1722  )))
1723 1723  
1724 1724  (((
1725 -(% _msthash="736727" _msttexthash="1907009" %)
1726 1726  Input password and ATZ to activate LHT65N,As shown below:
1727 1727  )))
1728 1728  
1729 -[[image:image-20220530095701-4.png||_mstalt="430014"]]
1703 +[[image:image-20220530095701-4.png]]
1730 1730  
1731 1731  
1732 -(% _msthash="506066" _msttexthash="544869" %)
1733 1733  AT Command List is as below:
1734 1734  
1735 -(% _msthash="506067" _msttexthash="361920" %)
1736 1736  AT+<CMD>? :  Help on <CMD>
1737 1737  
1738 -(% _msthash="506068" _msttexthash="243061" %)
1739 1739  AT+<CMD> :  Run <CMD>
1740 1740  
1741 -(% _msthash="506069" _msttexthash="704197" %)
1742 1742  AT+<CMD>=<value> :  Set the value
1743 1743  
1744 -(% _msthash="506070" _msttexthash="455676" %)
1745 1745  AT+<CMD>=? :  Get the value
1746 1746  
1747 -(% _msthash="506071" _msttexthash="670553" %)
1748 1748  AT+DEBUG:  Set more info output
1749 1749  
1750 -(% _msthash="506072" _msttexthash="485888" %)
1751 1751  ATZ:  Trig a reset of the MCU
1752 1752  
1753 -(% _msthash="506073" _msttexthash="2068872" %)
1754 1754  AT+FDR:  Reset Parameters to Factory Default, Keys Reserve
1755 1755  
1756 -(% _msthash="506074" _msttexthash="689169" %)
1757 1757  AT+DEUI:  Get or Set the Device EUI
1758 1758  
1759 -(% _msthash="506075" _msttexthash="960414" %)
1760 1760  AT+DADDR:  Get or Set the Device Address
1761 1761  
1762 -(% _msthash="506076" _msttexthash="1079897" %)
1763 1763  AT+APPKEY:  Get or Set the Application Key
1764 1764  
1765 -(% _msthash="506077" _msttexthash="1326143" %)
1766 1766  AT+NWKSKEY:  Get or Set the Network Session Key
1767 1767  
1768 -(% _msthash="506078" _msttexthash="1573000" %)
1769 1769  AT+APPSKEY:  Get or Set the Application Session Key
1770 1770  
1771 -(% _msthash="506079" _msttexthash="1041729" %)
1772 1772  AT+APPEUI:  Get or Set the Application EUI
1773 1773  
1774 -(% _msthash="506080" _msttexthash="2104206" %)
1775 1775  AT+ADR:  Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1776 1776  
1777 -(% _msthash="506081" _msttexthash="3369288" %)
1778 1778  AT+TXP:  Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1779 1779  
1780 -(% _msthash="506082" _msttexthash="1894529" %)
1781 1781  AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
1782 1782  
1783 -(% _msthash="506083" _msttexthash="3864172" %)
1784 1784  AT+DCS:  Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1785 1785  
1786 -(% _msthash="506084" _msttexthash="1712204" %)
1787 1787  AT+PNM:  Get or Set the public network mode. (0: off, 1: on)
1788 1788  
1789 -(% _msthash="506085" _msttexthash="1281202" %)
1790 1790  AT+RX2FQ:  Get or Set the Rx2 window frequency
1791 1791  
1792 -(% _msthash="506086" _msttexthash="2796781" %)
1793 1793  AT+RX2DR:  Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1794 1794  
1795 -(% _msthash="506087" _msttexthash="3285165" %)
1796 1796  AT+RX1DL:  Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1797 1797  
1798 -(% _msthash="506088" _msttexthash="3286179" %)
1799 1799  AT+RX2DL:  Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1800 1800  
1801 -(% _msthash="506089" _msttexthash="4703803" %)
1802 1802  AT+JN1DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1803 1803  
1804 -(% _msthash="506090" _msttexthash="4704999" %)
1805 1805  AT+JN2DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1806 1806  
1807 -(% _msthash="506091" _msttexthash="1528683" %)
1808 1808  AT+NJM:  Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1809 1809  
1810 -(% _msthash="506092" _msttexthash="757185" %)
1811 1811  AT+NWKID:  Get or Set the Network ID
1812 1812  
1813 -(% _msthash="506093" _msttexthash="1156597" %)
1814 1814  AT+FCU:  Get or Set the Frame Counter Uplink
1815 1815  
1816 -(% _msthash="506094" _msttexthash="1273987" %)
1817 1817  AT+FCD:  Get or Set the Frame Counter Downlink
1818 1818  
1819 -(% _msthash="506095" _msttexthash="859222" %)
1820 1820  AT+CLASS:  Get or Set the Device Class
1821 1821  
1822 -(% _msthash="506096" _msttexthash="384852" %)
1823 1823  AT+JOIN:  Join network
1824 1824  
1825 -(% _msthash="506097" _msttexthash="548626" %)
1826 1826  AT+NJS:  Get the join status
1827 1827  
1828 -(% _msthash="506098" _msttexthash="2546206" %)
1829 1829  AT+SENDB:  Send hexadecimal data along with the application port
1830 1830  
1831 -(% _msthash="506099" _msttexthash="1932307" %)
1832 1832  AT+SEND:  Send text data along with the application port
1833 1833  
1834 -(% _msthash="506100" _msttexthash="3560557" %)
1835 1835  AT+RECVB:  Print last received data in binary format (with hexadecimal values)
1836 1836  
1837 -(% _msthash="506101" _msttexthash="1429701" %)
1838 1838  AT+RECV:  Print last received data in raw format
1839 1839  
1840 -(% _msthash="506102" _msttexthash="1735981" %)
1841 1841  AT+VER:  Get current image version and Frequency Band
1842 1842  
1843 -(% _msthash="506103" _msttexthash="1189474" %)
1844 1844  AT+CFM:  Get or Set the confirmation mode (0-1)
1845 1845  
1846 -(% _msthash="506104" _msttexthash="1718210" %)
1847 1847  AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
1848 1848  
1849 -(% _msthash="506105" _msttexthash="1339403" %)
1850 1850  AT+SNR:  Get the SNR of the last received packet
1851 1851  
1852 -(% _msthash="506106" _msttexthash="1452009" %)
1853 1853  AT+RSSI:  Get the RSSI of the last received packet
1854 1854  
1855 -(% _msthash="506107" _msttexthash="2768142" %)
1856 1856  AT+TDC:  Get or set the application data transmission interval in ms
1857 1857  
1858 -(% _msthash="506108" _msttexthash="1083914" %)
1859 1859  AT+PORT:  Get or set the application port
1860 1860  
1861 -(% _msthash="506109" _msttexthash="622440" %)
1862 1862  AT+DISAT:  Disable AT commands
1863 1863  
1864 -(% _msthash="506110" _msttexthash="868361" %)
1865 1865  AT+PWORD:  Set password, max 9 digits
1866 1866  
1867 -(% _msthash="506111" _msttexthash="2210299" %)
1868 1868  AT+CHS:  Get or Set Frequency (Unit: Hz) for Single Channel Mode
1869 1869  
1870 -(% _msthash="506112" _msttexthash="2113462" %)
1871 1871  AT+CHE:  Get or Set eight channels mode,Only for US915,AU915,CN470
1872 1872  
1873 -(% _msthash="506113" _msttexthash="2087423" %)
1874 1874  AT+PDTA:  Print the sector data from start page to stop page
1875 1875  
1876 -(% _msthash="506114" _msttexthash="1063127" %)
1877 1877  AT+PLDTA:  Print the last few sets of data
1878 1878  
1879 -(% _msthash="506115" _msttexthash="1999426" %)
1880 1880  AT+CLRDTA:  Clear the storage, record position back to 1st
1881 1881  
1882 -(% _msthash="506116" _msttexthash="442130" %)
1883 1883  AT+SLEEP:  Set sleep mode
1884 1884  
1885 -(% _msthash="506117" _msttexthash="1080222" %)
1886 1886  AT+EXT:  Get or Set external sensor model
1887 1887  
1888 -(% _msthash="506118" _msttexthash="1309490" %)
1889 1889  AT+BAT:  Get the current battery voltage in mV
1890 1890  
1891 -(% _msthash="506119" _msttexthash="813891" %)
1892 1892  AT+CFG:  Print all configurations
1893 1893  
1894 -(% _msthash="506120" _msttexthash="551707" %)
1895 1895  AT+WMOD:  Get or Set Work Mode
1896 1896  
1897 -(% _msthash="506121" _msttexthash="2631499" %)
1898 1898  AT+ARTEMP:  Get or set the internal Temperature sensor alarm range
1899 1899  
1900 -(% _msthash="506122" _msttexthash="3907150" %)
1901 1901  AT+CITEMP:  Get or set the internal Temperature sensor collection interval in min
1902 1902  
1903 -(% _msthash="506123" _msttexthash="854620" %)
1904 1904  AT+SETCNT:  Set the count at present
1905 1905  
1906 -(% _msthash="506124" _msttexthash="2554877" %)
1907 1907  AT+RJTDC:  Get or set the ReJoin data transmission interval in min
1908 1908  
1909 -(% _msthash="506125" _msttexthash="771849" %)
1910 1910  AT+RPL:  Get or set response level
1911 1911  
1912 -(% _msthash="506126" _msttexthash="1484314" %)
1913 1913  AT+TIMESTAMP:  Get or Set UNIX timestamp in second
1914 1914  
1915 -(% _msthash="506127" _msttexthash="741728" %)
1916 1916  AT+LEAPSEC:  Get or Set Leap Second
1917 1917  
1918 -(% _msthash="506128" _msttexthash="1694017" %)
1919 1919  AT+SYNCMOD:  Get or Set time synchronization method
1920 1920  
1921 -(% _msthash="506129" _msttexthash="2235948" %)
1922 1922  AT+SYNCTDC:  Get or set time synchronization interval in day
1923 1923  
1924 -(% _msthash="506130" _msttexthash="425542" %)
1925 1925  AT+PID:  Get or set the PID
1926 1926  
1927 1927  
1928 -== (% _msthash="1616654" _msttexthash="1555359" %)6.2 Where to use AT commands and Downlink commands(%%) ==
1837 +== 6.2 Where to use AT commands and Downlink commands ==
1929 1929  
1930 -(% _msthash="506131" _msttexthash="14585714" %)
1931 1931  AT commands：
1932 1932  
1933 -[[image:image-20220615092034-1.png||_mstalt="428870"]]
1841 +[[image:image-20220615092034-1.png]]
1934 1934  
1935 -(% _msthash="506132" _msttexthash="337922" %)
1936 1936  Downlink commands:
1937 1937  
1845 +TTN:
1938 1938  
1939 -(% _msthash="506133" _msttexthash="33046" %)
1940 -**TTN:**
1847 +[[image:image-20220615092124-2.png]]
1941 1941  
1942 -[[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
1849 +Helium：
1943 1943  
1851 +[[image:image-20220615092551-3.png]]
1944 1944  
1945 -(% _msthash="506134" _msttexthash="11113791" %)
1946 -**Helium：**
1853 +Chirpstack:The downlink window will not be displayed until the network is accessed
1947 1947  
1948 -[[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
1855 +[[image:image-20220615094850-6.png]]
1949 1949  
1857 +[[image:image-20220615094904-7.png]]
1950 1950  
1951 -(% _msthash="506135" _msttexthash="4159844" %)
1952 -**Chirpstack:The downlink window will not be displayed until the network is accessed**
1859 +Aws:
1953 1953  
1954 -[[image:image-20220615094850-6.png||_mstalt="433082"]]
1861 +[[image:image-20220615092939-4.png]]
1955 1955  
1956 -[[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
1863 +== 6.3 How to change the uplink interval？ ==
1957 1957  
1958 -
1959 -(% _msthash="506136" _msttexthash="39286" %)
1960 -**Aws:**
1961 -
1962 -[[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
1963 -
1964 -
1965 -== (% _msthash="1220570" _msttexthash="33199257" %)6.3 How to change the uplink interval？(%%) ==
1966 -
1967 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/||_msthash="506137" _msttexthash="5712018"]]
1968 -
1969 -
1970 -(% _msthash="536757" _msttexthash="1874951" %)
1971 -== 6.4 How to use TTL-USB to connect a PC to input AT commands? ==
1972 -
1973 -[[image:image-20220615153355-1.png]]
1974 -
1975 -(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1976 -
1977 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1978 -
1979 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1980 -
1981 -[[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1982 -
1983 -
1984 -(((
1985 -(% _msthash="736728" _msttexthash="67213055" %)
1986 -(((
1987 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1865 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/]]
1988 1988  )))
1989 -)))
1990 1990  
1991 -(((
1992 -(% _msthash="736729" _msttexthash="1907009" %)
1993 -Input password and ATZ to activate LHT65N,As shown below:
1994 -
1995 -[[image:image-20220615154519-3.png]]
1996 -
1997 -
1998 -)))
1999 -
2000 -
2001 -== 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
2002 -
2003 -[[image:image-20220615153355-1.png]]
2004 -
2005 -(% style="background-color:yellow" %)**4  < - ->  3.3V  < - ->  Blue**
2006 -
2007 -(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
2008 -
2009 -(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
2010 -
2011 -Use after connection， ground wire（1 < - -> GND  < - ->  Black） for 1s and then pull it out.Then restart the device.
2012 -
2013 -
2014 -(% _mstmutation="1" %)**Step1**(%%): Install TremoProgrammer  first.
2015 -
2016 -[[image:image-20220615170542-5.png]]
2017 -
2018 -
2019 -(% _msthash="506146" _msttexthash="52173160" %)
2020 -(% _istranslated="1" %)**Step2**(%%)：Download the LHT65N image files.
2021 -
2022 -
2023 -(% _msthash="506147" _msttexthash="188083584" %)
2024 -(% _istranslated="1" %)**Step3：**(%%)Select the serial port and baud rate of the device and the firmware to be upgraded.
2025 -
2026 -[[image:image-20220615171334-6.png]]
2027 -
2028 -
2029 -(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2030 -
2031 -
2032 -)))
2033 -
2034 2034  (% _mstvisible="1" %)
2035 -= (% _msthash="183170" _msttexthash="13740740" _mstvisible="3" %)7. (%%)Order Info =
1869 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)7. Order Info(%%) =
2036 2036  
2037 2037  (% _mstvisible="1" %)
2038 2038  (((
... ... @@ -2050,42 +2050,42 @@
2050 2050  * (% _mstvisible="3" %)
2051 2051  (((
2052 2052  (% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
2053 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1887 +(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
2054 2054  )))
2055 2055  * (% _mstvisible="3" %)
2056 2056  (((
2057 2057  (% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
2058 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1892 +(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
2059 2059  )))
2060 2060  * (% _mstvisible="3" %)
2061 2061  (((
2062 2062  (% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
2063 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1897 +(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
2064 2064  )))
2065 2065  * (% _mstvisible="3" %)
2066 2066  (((
2067 2067  (% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
2068 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1902 +(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
2069 2069  )))
2070 2070  * (% _mstvisible="3" %)
2071 2071  (((
2072 2072  (% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
2073 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1907 +(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
2074 2074  )))
2075 2075  * (% _mstvisible="3" %)
2076 2076  (((
2077 2077  (% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
2078 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1912 +(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
2079 2079  )))
2080 2080  * (% _mstvisible="3" %)
2081 2081  (((
2082 2082  (% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
2083 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1917 +(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
2084 2084  )))
2085 2085  * (% _mstvisible="3" %)
2086 2086  (((
2087 2087  (% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
2088 -(% _mstvisible="6" style="color:#4f81bd" %)** **(% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1922 +(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
2089 2089  )))
2090 2090  
2091 2091  (% _mstvisible="1" %)
... ... @@ -2098,7 +2098,7 @@
2098 2098  * (% _mstvisible="3" %)
2099 2099  (((
2100 2100  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2101 -(% style="color:red" %)**E3**(%%): External Temperature Probe
1935 +(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
2102 2102  
2103 2103  
2104 2104  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
... ... @@ -2106,7 +2106,7 @@
2106 2106  )))
2107 2107  
2108 2108  (% _mstvisible="1" %)
2109 -= (% _msthash="233363" _msttexthash="13823550" _mstvisible="3" %)8. (%%)Packing Info =
1943 += (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)8. Packing Info(%%) =
2110 2110  
2111 2111  (% _mstvisible="1" %)
2112 2112  (((
... ... @@ -2125,6 +2125,11 @@
2125 2125  )))
2126 2126  * (% _mstvisible="3" %)
2127 2127  (((
1962 +(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
1963 +Program cable x 1
1964 +)))
1965 +* (% _mstvisible="3" %)
1966 +(((
2128 2128  (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2129 2129  Optional external sensor
2130 2130  )))
... ... @@ -2139,30 +2139,34 @@
2139 2139  * (% _mstvisible="3" %)
2140 2140  (((
2141 2141  (% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
2142 -Device Size:  10 x 10 x 3.5 cm
1981 +Device Size:  13.5 x 7 x 3 cm
2143 2143  )))
2144 2144  * (% _mstvisible="3" %)
2145 2145  (((
2146 2146  (% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
2147 -Device Weight: 120.5g
1986 +Device Weight: 105g
2148 2148  )))
2149 -
2150 -(% _mstvisible="3" %)
1988 +* (% _mstvisible="3" %)
2151 2151  (((
2152 -
1990 +(% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
1991 +Package Size / pcs : 14.5 x 8 x 5 cm
1992 +)))
1993 +* (% _mstvisible="3" %)
1994 +(((
1995 +(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1996 +Weight / pcs : 170g
2153 2153  
1998 +
2154 2154  (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2155 2155  
2156 2156  )))
2157 2157  
2158 -= (% _msthash="184782" _msttexthash="16007771" %)9. Reference material(%%) =
2003 += 9. Reference =
2159 2159  
2160 -* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor||_msthash="504975" _msttexthash="51420512"]]
2005 +* [[Datasheet, Photos, Decoder, Firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor]]
2161 2161  
2007 += 10. FCC Warning =
2162 2162  
2163 -
2164 -= (% _msthash="216320" _msttexthash="10002096" %)10. (%%)FCC Warning =
2165 -
2166 2166  (% _mstvisible="1" %)
2167 2167  (((
2168 2168  (% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
image-20220615153355-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -867.5 KB
Content
image-20220615153914-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -145.1 KB
Content
image-20220615154519-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -51.0 KB
Content
image-20220615170242-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -5.9 KB
Content
image-20220615170542-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -5.3 KB
Content
image-20220615171334-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -16.2 KB
Content
image-20220617150003-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -16.5 KB
Content