Skip to Content
Last modified by Mengting Qiu on 2025/07/03 14:48
From version 147.4
edited by Xiaoling
on 2022/06/17 14:45
Change comment: There is no comment for this version
To version 161.1
edited by Bei Jinggeng
on 2022/06/20 16:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -22,6 +22,9 @@
22 22  (% _mstvisible="1" %)
23 23  (((
24 24  (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 +
26 +
27 +(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 25  The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
26 26  )))
27 27  
... ... @@ -202,8 +202,8 @@
202 202  The LHT65N has two working modes:
203 203  
204 204  (% _mstvisible="1" %)
205 -* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
206 -* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
208 +* (% style="color:blue" %)**Deep Sleep Mode**(%%): LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
209 +* (% style="color:blue" %)**Working Mode**(%%):  In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65N will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
207 207  
208 208  (% _mstvisible="1" %)
209 209  (((
... ... @@ -241,7 +241,7 @@
241 241  Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
242 242  
243 243  (% _mstvisible="1" %)
244 -[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
247 +[[image:image-20220617150003-1.jpeg]]
245 245  
246 246  (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
247 247  User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
... ... @@ -468,7 +468,6 @@
468 468  )))
469 469  
470 470  
471 -
472 472  (% _mstvisible="1" %)
473 473  ==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
474 474  
... ... @@ -589,6 +589,11 @@
589 589  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
590 590  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
591 591  
594 +==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.3 Ext~=6, ADC Sensor (use with E2 Cable)(%%) ====
595 +
596 +
597 +
598 +
592 592  (% _mstvisible="1" %)
593 593  == (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
594 594  
... ... @@ -1080,19 +1080,19 @@
1080 1080  (% _mstvisible="1" class="box infomessage" %)
1081 1081  (((
1082 1082  (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1083 -(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1090 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%):  Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1084 1084  
1085 1085  (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1086 -(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1093 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%):  The interval between checking the alarm temperature. (In minutes)
1087 1087  
1088 1088  (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1089 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1096 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%):  Gets or sets the alarm range of the internal temperature sensor
1090 1090  
1091 1091  (% _mstvisible="2" style="text-align: left;" %)
1092 -(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1099 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%):  Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1093 1093  
1094 1094  (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1095 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1102 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%):  Set the internal temperature sensor alarm range from 45 to 105.
1096 1096  )))
1097 1097  
1098 1098  
... ... @@ -1135,9 +1135,6 @@
1135 1135  For each success downlink, the PURPLE LED will blink once
1136 1136  
1137 1137  
1138 -
1139 -
1140 -(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1141 1141  
1142 1142  )))
1143 1143  
... ... @@ -1152,6 +1152,17 @@
1152 1152  = (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1153 1153  
1154 1154  (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1159 +== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E2 Extension Cable(%%) ==
1160 +
1161 +[[image:image-20220619092222-1.png||height="182" width="188"]][[image:image-20220619092313-2.png||height="182" width="173"]]
1162 +
1163 +1m long breakout cable for LHT65N
1164 +
1165 +[[image:image-20220619092421-3.png||height="371" width="529"]]
1166 +
1167 +
1168 +
1169 +(% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1155 1155  == (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E3 Temperature Probe(%%) ==
1156 1156  
1157 1157  (% _mstvisible="1" %)
... ... @@ -1241,7 +1241,7 @@
1241 1241  (% _mstvisible="1" %)
1242 1242  (((
1243 1243  (% _mstvisible="2" style="text-align: left;" %)
1244 -(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506054" _msttexthash="792038" %)**Commands special design for LHT65N**
1259 +(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**Commands special design for LHT65N**
1245 1245  )))
1246 1246  
1247 1247  (% _mstvisible="1" %)
... ... @@ -1644,6 +1644,7 @@
1644 1644  (% _mstvisible="1" %)
1645 1645  [[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1646 1646  
1662 +
1647 1647  (% _mstvisible="1" %)
1648 1648  == (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1649 1649  
... ... @@ -1694,7 +1694,7 @@
1694 1694  
1695 1695  (((
1696 1696  (% _msthash="736726" _msttexthash="67213055" %)
1697 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.htmlml]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1713 +In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600**(%%) to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**) (%%)to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1698 1698  )))
1699 1699  
1700 1700  (((
... ... @@ -1906,7 +1906,7 @@
1906 1906  (% _msthash="506131" _msttexthash="14585714" %)
1907 1907  AT commands：
1908 1908  
1909 -[[image:image-20220615092034-1.png||_mstalt="428870"]]
1925 +[[image:image-20220620153708-1.png||height="603" width="723"]]
1910 1910  
1911 1911  (% _msthash="506132" _msttexthash="337922" %)
1912 1912  Downlink commands:
... ... @@ -1915,25 +1915,27 @@
1915 1915  (% _msthash="506133" _msttexthash="33046" %)
1916 1916  **TTN:**
1917 1917  
1918 -[[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
1934 +[[image:image-20220615092124-2.png||_mstalt="429221" height="649" width="688"]]
1919 1919  
1920 1920  
1921 1921  (% _msthash="506134" _msttexthash="11113791" %)
1922 1922  **Helium：**
1923 1923  
1924 -[[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
1940 +[[image:image-20220615092551-3.png||_mstalt="430794" height="423" width="835"]]
1925 1925  
1942 +
1926 1926  (% _msthash="506135" _msttexthash="4159844" %)
1927 -Chirpstack:The downlink window will not be displayed until the network is accessed
1944 +**Chirpstack:The downlink window will not be displayed until the network is accessed**
1928 1928  
1929 1929  [[image:image-20220615094850-6.png||_mstalt="433082"]]
1930 1930  
1931 -[[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
1948 +[[image:image-20220615094904-7.png||_mstalt="433485" height="281" width="911"]]
1932 1932  
1950 +
1933 1933  (% _msthash="506136" _msttexthash="39286" %)
1934 -Aws:
1952 +**Aws:**
1935 1935  
1936 -[[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
1954 +[[image:image-20220615092939-4.png||_mstalt="434460" height="448" width="894"]]
1937 1937  
1938 1938  
1939 1939  == (% _msthash="1220570" _msttexthash="33199257" %)6.3 How to change the uplink interval？(%%) ==
... ... @@ -1946,57 +1946,54 @@
1946 1946  
1947 1947  [[image:image-20220615153355-1.png]]
1948 1948  
1949 -(% _msthash="506138" _msttexthash="243997" %)
1950 -*
1951 -** (% style="background-color:yellow" %)1 < - -> GND  < - ->  Black
1967 +[[image:image-20220620154900-5.jpeg||height="427" width="570"]]
1952 1952  
1953 -(% _msthash="506139" _msttexthash="257166" %)
1954 -*
1955 -** (% style="background-color:yellow" %)5 < - ->  RXD  < - ->  White
1969 +(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1956 1956  
1957 -(% _msthash="506140" _msttexthash="253799" %)
1958 -*
1959 -** (% style="background-color:yellow" %)9 < - ->  TXD  < - ->  Green
1971 +(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1960 1960  
1961 -[[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1973 +(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1962 1962  
1975 +[[image:image-20220620154433-3.png||height="573" width="430"]]
1976 +
1977 +
1978 +
1963 1963  (((
1964 1964  (% _msthash="736728" _msttexthash="67213055" %)
1965 -In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.htmlml]], SecureCRT) baud rate to
1966 -(% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:
1967 -(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1981 +(((
1982 +In PC, User needs to set serial tool(such as [[**putty**>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**9600** (%%)to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:(% style="color:red" %)**123456**)(%%) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1968 1968  )))
1984 +)))
1969 1969  
1970 1970  (((
1971 1971  (% _msthash="736729" _msttexthash="1907009" %)
1972 1972  Input password and ATZ to activate LHT65N,As shown below:
1973 1973  
1974 -[[image:image-20220615154519-3.png]]
1990 +[[image:image-20220615154519-3.png||height="672" width="807"]]
1975 1975  
1976 1976  
1977 1977  )))
1978 1978  
1979 -
1980 -
1981 1981  == 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
1982 1982  
1997 +
1983 1983  [[image:image-20220615153355-1.png]]
1984 1984  
1985 -(% _msthash="506141" _msttexthash="231309" %)
1986 -*
1987 -** (% style="background-color:yellow" %)4  < - ->  3.3V  < - ->  Blue
2000 +(% style="background-color:yellow" %)**1 < - -> GND  < - ->  Black**
1988 1988  
1989 -(% _msthash="506142" _msttexthash="257166" %)
1990 -*
1991 -** (% style="background-color:yellow" %)5 < - ->  RXD  < - ->  White
2002 +(% style="background-color:yellow" %)**4  < - ->  3.3V  < - ->  Blue**
1992 1992  
1993 -(% _msthash="506143" _msttexthash="253799" %)
1994 -*
1995 -** (% style="background-color:yellow" %)9 < - ->  TXD  < - ->  Green
2004 +(% style="background-color:yellow" %)**5 < - ->  RXD  < - ->  White**
1996 1996  
1997 -Use after connection， ground wire（1 < - -> GND  < - ->  Black） for 1s and then pull it out.Then restart the device.
2006 +(% style="background-color:yellow" %)**9 < - ->  TXD  < - ->  Green**
1998 1998  
2008 +[[image:image-20220620160241-6.jpeg||height="428" width="571"]]
1999 1999  
2010 +Press reset after connecting the 4boot cable to enter the download mode.
2011 +
2012 +[[image:image-20220620160516-7.png||height="435" width="435"]]
2013 +
2014 +
2000 2000  (% _mstmutation="1" %)**Step1**(%%): Install TremoProgrammer  first.
2001 2001  
2002 2002  [[image:image-20220615170542-5.png]]
... ... @@ -2012,9 +2012,9 @@
2012 2012  [[image:image-20220615171334-6.png]]
2013 2013  
2014 2014  
2015 -(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2030 +(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)Click Start
2016 2016  
2017 -
2032 +[[image:image-20220620160723-8.png]]
2018 2018  )))
2019 2019  
2020 2020  (% _mstvisible="1" %)
... ... @@ -2086,8 +2086,6 @@
2086 2086  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2087 2087  (% style="color:red" %)**E3**(%%): External Temperature Probe
2088 2088  
2089 -
2090 -(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2091 2091  
2092 2092  )))
2093 2093  
... ... @@ -2111,11 +2111,6 @@
2111 2111  )))
2112 2112  * (% _mstvisible="3" %)
2113 2113  (((
2114 -(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
2115 -Program cable x 1
2116 -)))
2117 -* (% _mstvisible="3" %)
2118 -(((
2119 2119  (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2120 2120  Optional external sensor
2121 2121  )))
... ... @@ -2141,9 +2141,6 @@
2141 2141  (% _mstvisible="3" %)
2142 2142  (((
2143 2143  
2144 -
2145 -(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2146 -
2147 2147  )))
2148 2148  
2149 2149  = (% _msthash="184782" _msttexthash="16007771" %)9. Reference material(%%) =
image-20220617150003-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.5 KB
Content
image-20220619092222-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +530.7 KB
Content
image-20220619092313-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +452.5 KB
Content
image-20220619092421-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +234.1 KB
Content
image-20220620153708-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +69.2 KB
Content
image-20220620154433-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +2.6 MB
Content
image-20220620154721-4.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +139.7 KB
Content
image-20220620154900-5.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +160.9 KB
Content
image-20220620160241-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +150.8 KB
Content
image-20220620160516-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +2.6 MB
Content
image-20220620160723-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +15.5 KB
Content