Changes for page LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 1 removed)
  • image-20220615171334-6.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Xiaoling
	1	+XWiki.Edwin

Content

...	...	@@ -1,5 +1,5 @@
1	1	(% style="text-align:center" %)
2		-[[image:image-20220613162008-1.png||_mstalt="428142" height="579" width="379"]]
	2	+[[image:image-20220613162008-1.png||height="579" width="379"]]
3	3
4	4
5	5
...	...	@@ -6,7 +6,7 @@
6	6
7	7
8	8	(% _mstvisible="1" %)
9		-(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**目录：**
	9	+(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
10	10
11	11	{{toc/}}
12	12
...	...	@@ -14,45 +14,45 @@
14	14
15	15
16	16	(% _mstvisible="1" %)
17		-= (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)一、简介(%%) =
	17	+= (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)1. Introduction(%%) =
18	18
19	19	(% _mstvisible="1" %)
20		-== (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 什么是 LHT65N 温湿度传感器(%%) ==
	20	+== (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 What is LHT65N Temperature & Humidity Sensor(%%) ==
21	21
22	22	(% _mstvisible="1" %)
23	23	(((
24	24	(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25		-Dragino LHT65N 温度和湿度传感器是一款远程 LoRaWAN 传感器。它包括一个 (% _mstvisible="4" style="color:#4f81bd" %)**内置温度和湿度传感器**(%%)，并具有一个外部传感器连接器，用于连接外部(% _mstvisible="4" style="color:#4f81bd" %)**温度传感器**(% _mstvisible="3" %)**。**
	25	+The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
26	26	)))
27	27
28	28	(% _mstvisible="1" %)
29	29	(((
30	30	(% _msthash="506052" _msttexthash="66005810" _mstvisible="2" %)
31		-LHT65N 允许用户发送数据并达到极远的距离。它提供超长距离扩频通信和高抗干扰性，同时最大限度地减少电流消耗。它针对专业的无线传感器网络应用，例如灌溉系统、智能计量、智慧城市、楼宇自动化等。
	31	+The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
32	32	)))
33	33
34	34	(% _mstvisible="1" %)
35	35	(((
36	36	(% _msthash="506053" _msttexthash="4298047" _mstvisible="2" %)
37		-LHT65N 内置 2400mAh 不可充电电池，可使用长达 10 年*。
	37	+LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
38	38	)))
39	39
40	40	(% _mstvisible="1" %)
41	41	(((
42	42	(% _msthash="506054" _msttexthash="6016374" _mstvisible="2" %)
43		-LHT65N完全兼容LoRaWAN v1.0.3 Class A协议，可与标准LoRaWAN网关配合使用。
	43	+LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
44	44	)))
45	45
46	46	(% _mstvisible="1" %)
47	47	(((
48	48	(% _msthash="506055" _msttexthash="17023136" _mstvisible="2" %)
49		-LHT65N 支持(% _mstvisible="4" style="color:#4f81bd" %)**数据记录功能**(%%)。它会在没有网络覆盖的情况下记录数据，用户可以稍后检索传感器值，以确保每次传感器读数都不会丢失。
	49	+LHT65N supports (% _mstvisible="4" style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
50	50	)))
51	51
52	52	(% _mstvisible="1" %)
53	53	(((
54	54	(% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
55		-*实际电池寿命取决于发送数据的频率，请参阅电池分析仪章节。
	55	+*The actual battery life depends on how often to send data, please see the battery analyzer chapter.
56	56
57	57	(% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
58	58
...	...	@@ -59,25 +59,23 @@
59	59	)))
60	60
61	61	(% _mstvisible="1" %)
62		-== (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 特点(%%) ==
	62	+== (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 Features(%%) ==
63	63
64	64	(% _mstvisible="1" %)
65		-* 壁挂式
66		-* LoRaWAN v1.0.3 A类协议
67		-* 频段：CN470/EU433/KR920/US915/EU868/AS923/AU915
68		-* AT 命令更改参数
69		-* 通过 LoRaWAN Downlink 远程配置参数
70		-* 固件可通过程序端口升级
71		-* 内置 2400mAh 电池，可使用长达 10 年。
72		-* 内置温湿度传感器
73		-* 可选的外部传感器
74		-* 三色LED指示工作状态
75		-* 数据记录功能
	65	+* Wall mountable
	66	+* LoRaWAN v1.0.3 Class A protocol
	67	+* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
	68	+* AT Commands to change parameters
	69	+* Remote configure parameters via LoRaWAN Downlink
	70	+* Firmware upgradeable via program port
	71	+* Built-in 2400mAh battery for up to 10 years of use.
	72	+* Built-in Temperature & Humidity sensor
	73	+* Optional External Sensors
	74	+* Tri-color LED to indicate working status
	75	+* Datalog feature
76	76
77		-
78		-
79	79	(% _mstvisible="1" %)
80		-== (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 规格(%%) ==
	78	+== (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
81	81
82	82	(% _mstvisible="1" %)
83	83	(((
...	...	@@ -85,7 +85,7 @@
85	85
86	86
87	87	(% _mstvisible="2" %)
88		-(% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**内置温度传感器：**
	86	+(% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**Built-in Temperature Sensor:**
89	89	)))
90	90
91	91	(% _mstvisible="1" %)
...	...	@@ -92,22 +92,22 @@
92	92	* (% _mstvisible="3" %)
93	93	(((
94	94	(% _msthash="902993" _msttexthash="294424" _mstvisible="4" %)
95		-分辨率：0.01 °C
	93	+Resolution: 0.01 °C
96	96	)))
97	97	* (% _mstvisible="3" %)
98	98	(((
99	99	(% _msthash="902994" _msttexthash="690664" _mstvisible="4" %)
100		-精度公差：典型值 ±0.3 °C
	98	+Accuracy Tolerance : Typ ±0.3 °C
101	101	)))
102	102	* (% _mstvisible="3" %)
103	103	(((
104	104	(% _msthash="902995" _msttexthash="504647" _mstvisible="4" %)
105		-长期漂移：< 0.02 °C/年
	103	+Long Term Drift: < 0.02 °C/yr
106	106	)))
107	107	* (% _mstvisible="3" %)
108	108	(((
109	109	(% _msthash="902996" _msttexthash="478257" _mstvisible="4" %)
110		-工作范围：-40 ~~ 85 °C
	108	+Operating Range: -40 ~~ 85 °C
111	111	)))
112	112
113	113	(% _mstvisible="1" %)
...	...	@@ -116,7 +116,7 @@
116	116
117	117
118	118	(% _mstvisible="2" %)
119		-(% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**内置湿度传感器：**
	117	+(% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**Built-in Humidity Sensor:**
120	120	)))
121	121
122	122	(% _mstvisible="1" %)
...	...	@@ -123,22 +123,22 @@
123	123	* (% _mstvisible="3" %)
124	124	(((
125	125	(% _msthash="902997" _msttexthash="282438" _mstvisible="4" %)
126		-分辨率：0.04 %RH
	124	+Resolution: 0.04 %RH
127	127	)))
128	128	* (% _mstvisible="3" %)
129	129	(((
130	130	(% _msthash="902998" _msttexthash="628771" _mstvisible="4" %)
131		-精度公差：典型值 ±3 %RH
	129	+Accuracy Tolerance : Typ ±3 %RH
132	132	)))
133	133	* (% _mstvisible="3" %)
134	134	(((
135	135	(% _msthash="902999" _msttexthash="504647" _mstvisible="4" %)
136		-长期漂移：< 0.02 °C/年
	134	+Long Term Drift: < 0.02 °C/yr
137	137	)))
138	138	* (% _mstvisible="3" %)
139	139	(((
140	140	(% _msthash="903000" _msttexthash="421291" _mstvisible="4" %)
141		-工作范围：0 ~~ 96 %RH
	139	+Operating Range: 0 ~~ 96 %RH
142	142	)))
143	143
144	144	(% _mstvisible="1" %)
...	...	@@ -147,7 +147,7 @@
147	147
148	148
149	149	(% _mstvisible="2" %)
150		-(% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**外部温度传感器：**
	148	+(% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**External Temperature Sensor:**
151	151	)))
152	152
153	153	(% _mstvisible="1" %)
...	...	@@ -154,22 +154,22 @@
154	154	* (% _mstvisible="3" %)
155	155	(((
156	156	(% _msthash="903001" _msttexthash="332254" _mstvisible="4" %)
157		-分辨率：0.0625 °C
	155	+Resolution: 0.0625 °C
158	158	)))
159	159	* (% _mstvisible="3" %)
160	160	(((
161	161	(% _msthash="903002" _msttexthash="782600" _mstvisible="4" %)
162		--10°C 至 +85°C 的 ±0.5°C 精度
	160	+±0.5°C accuracy from -10°C to +85°C
163	163	)))
164	164	* (% _mstvisible="3" %)
165	165	(((
166	166	(% _msthash="903003" _msttexthash="729482" _mstvisible="4" %)
167		--55°C 至 +125°C 的 ±2°C 精度
	165	+±2°C accuracy from -55°C to +125°C
168	168	)))
169	169	* (% _mstvisible="3" %)
170	170	(((
171	171	(% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
172		-工作范围：-55 °C ~~ 125 °C
	170	+Operating Range: -55 °C ~~ 125 °C
173	173
174	174
175	175	(% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
...	...	@@ -177,21 +177,21 @@
177	177	)))
178	178
179	179	(% _mstvisible="1" %)
180		-= (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. 连接 LHT65N 到物联网服务器(%%) =
	178	+= (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. Connect LHT65N to IoT Server(%%) =
181	181
182	182	(% _mstvisible="1" %)
183		-== (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 LHT65N 是如何工作的？(%%) ==
	181	+== (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 How does LHT65N work?(%%) ==
184	184
185	185	(% _mstvisible="1" %)
186	186	(((
187	187	(% _msthash="506060" _msttexthash="28254538" _mstvisible="2" %)
188		-LHT65N 默认配置为 LoRaWAN OTAA Class A 模式。每个 LHT65N 都附带一套全球唯一的 OTAA 密钥。要在 LoRaWAN 网络中使用 LHT65N，首先需要将 OTAA 密钥放入 LoRaWAN Network Server，然后激活 LHT65N。
	186	+LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
189	189	)))
190	190
191	191	(% _mstvisible="1" %)
192	192	(((
193	193	(% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
194		-如果 LHT65N 在这个 LoRaWAN 网络的覆盖范围内。LHT65N 可以自动加入 LoRaWAN 网络。成功加入后，LHT65N 将开始测量环境温度和湿度，并开始将传感器数据传输到 LoRaWAN 服务器。每个上行链路的默认周期为 20 分钟。
	192	+If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
195	195
196	196	(% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
197	197
...	...	@@ -198,19 +198,19 @@
198	198	)))
199	199
200	200	(% _mstvisible="1" %)
201		-== (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 如何激活 LHT65N？(%%) ==
	199	+== (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 How to Activate LHT65N?(%%) ==
202	202
203	203	(% _msthash="315239" _msttexthash="748241" _mstvisible="1" %)
204		-LHT65N 有两种工作模式：
	202	+The LHT65N has two working modes:
205	205
206	206	(% _mstvisible="1" %)
207		-* **深度睡眠模式**：LHT65N 没有任何 LoRaWAN 激活。此模式用于存储和运输以节省电池寿命。
208		-* **工作模式**：在此模式下，LHT65N 作为 LoRaWAN Sensor 模式加入 LoRaWAN 网络并将传感器数据发送到服务器。在每个周期采样/tx/rx 之间，LHT65 将处于 STOP 模式（IDLE 模式），在 STOP 模式下，LHT65N 的功耗与深度睡眠模式相同。
	205	+* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
	206	+* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.
209	209
210	210	(% _mstvisible="1" %)
211	211	(((
212	212	(% _msthash="506062" _msttexthash="6036823" _mstvisible="2" %)
213		-LHT65N 默认设置为深度睡眠模式；正面的ACT键是切换不同模式：
	211	+The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
214	214	)))
215	215
216	216	(% _mstvisible="1" %)
...	...	@@ -221,35 +221,35 @@
221	221
222	222
223	223	(% _mstvisible="1" %)
224		-== (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 加入LoRaWAN网络示例(%%) ==
	222	+== (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 Example to join LoRaWAN network(%%) ==
225	225
226	226	(% _msthash="315240" _msttexthash="9205482" _mstvisible="1" class="wikigeneratedid" %)
227		-本节展示了如何加入 TTN V3 LoRaWAN IoT 服务器的示例。与其他 LoRaWAN IoT 服务器一起使用的过程类似。
	225	+This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
228	228
229	229	(% _mstvisible="1" class="wikigeneratedid" %)
230	230	[[image:image-20220522232442-1.png||_mstalt="427830" _mstvisible="3" height="387" width="648"]]
231	231
232	232	(% _msthash="315241" _msttexthash="10802155" _mstvisible="1" %)
233		-假设 LPS8N 已经设置为连接到[[TTN V3 网络>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]]，因此它为 LHT65N 提供网络覆盖。接下来我们需要在 TTN V3 中添加 LHT65N 设备：
	231	+Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
234	234
235	235
236	236	(% _mstvisible="1" %)
237		-=== (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 第一步：创建Device n TTN(%%) ===
	235	+=== (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 Step 1: Create Device n TTN(%%) ===
238	238
239	239	(% _msthash="315242" _msttexthash="1601782" _mstvisible="1" %)
240		-使用 LHT65N 的 OTAA 密钥在 TTN V3 中创建设备。
	238	+Create a device in TTN V3 with the OTAA keys from LHT65N.
241	241
242	242	(% _msthash="315243" _msttexthash="3694444" _mstvisible="1" %)
243		-每个 LHT65N 都附有一张贴纸，上面有它的设备 EUI、APP Key 和 APP EUI，如下所示：
	241	+Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
244	244
245	245	(% _mstvisible="1" %)
246	246	[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
247	247
248	248	(% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
249		-用户可以在 LoRaWAN 服务器门户中输入这些密钥。以下是TTN V3截图：
	247	+User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
250	250
251	251	(% _msthash="315245" _msttexthash="642889" _mstvisible="1" %)
252		-在应用程序中添加 APP EUI。
	250	+Add APP EUI in the application.
253	253
254	254	(% _mstvisible="1" %)
255	255	[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]
...	...	@@ -261,7 +261,7 @@
261	261	[[image:image-20220522232954-5.png||_mstalt="431847" _mstvisible="3"]]
262	262
263	263	(% _msthash="315246" _msttexthash="878800" _mstvisible="1" %)
264		-注意：LHT65N 使用与 LHT65 相同的有效载荷。
	262	+Note: LHT65N use same payload as LHT65.
265	265
266	266	(% _mstvisible="1" %)
267	267	[[image:image-20220522233026-6.png||_mstalt="429403" _mstvisible="3"]]
...	...	@@ -268,7 +268,7 @@
268	268
269	269
270	270	(% _msthash="315247" _msttexthash="595543" _mstvisible="1" %)
271		-输入APP EUI、APP KEY和DEV EUI：
	269	+Input APP EUI,  APP KEY and DEV EUI:
272	272
273	273	(% _mstvisible="1" %)
274	274	[[image:image-20220522233118-7.png||_mstalt="430430" _mstvisible="3"]]
...	...	@@ -276,10 +276,10 @@
276	276
277	277
278	278	(% _mstvisible="1" %)
279		-=== (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 步骤 2：按住 ACT 按钮 5 秒以上激活 LHT65N。(%%) ===
	277	+=== (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds.(%%) ===
280	280
281	281	(% _msthash="315248" _msttexthash="14452321" _mstvisible="1" %)
282		-使用 ACT 按钮激活 LHT65N，它将自动加入 TTN V3 网络。加入成功后，将开始上传传感器数据到TTN V3，用户可以在面板中看到。
	280	+Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
283	283
284	284	(% _mstvisible="1" %)
285	285	[[image:image-20220522233300-8.png||_mstalt="428389" _mstvisible="3" height="219" width="722"]]
...	...	@@ -287,19 +287,19 @@
287	287
288	288
289	289	(% _mstvisible="1" %)
290		-== (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 上行有效载荷(%%) ==
	288	+== (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 Uplink Payload(%%) ==
291	291
292	292	(% _msthash="315249" _msttexthash="7722962" _mstvisible="1" %)
293		-上行有效载荷总共包括 11 个字节。上行数据包使用 FPORT=2， 默认(% _mstvisible="3" style="color:#4f81bd" %)**每 20 分钟**(%%) 发送一个上行链路。
	291	+The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% _mstvisible="3" style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
294	294
295	295	(% _msthash="315250" _msttexthash="1322711" _mstvisible="1" %)
296		-每次上行后，(% _mstvisible="3" style="color:blue" %)**蓝色 LED**(%%)将闪烁一次。
	294	+After each uplink, the (% _mstvisible="3" style="color:blue" %)**BLUE LED**(%%) will blink once.
297	297
298	298	(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)
299	299	(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)
300	300	(((
301	301	(% _mstvisible="6" %)
302		-(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**大小（字节）**
	300	+(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
303	303	)))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)
304	304	(((
305	305	(% _mstvisible="6" %)
...	...	@@ -324,17 +324,17 @@
324	324	(% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
325	325	(((
326	326	(% _mstvisible="6" %)
327		-(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**价值**
	325	+(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**
328	328	)))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
329	329	(((
330	330	(% _mstvisible="6" %)
331		-[[蝙蝠>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
	329	+[[BAT>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
332	332	)))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
333	333	(((
334	334	(% _mstvisible="6" %)
335	335	(((
336	336	(% _mstvisible="7" %)
337		-[[内置温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
	335	+[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
338	338	)))
339	339	)))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
340	340	(((
...	...	@@ -341,39 +341,37 @@
341	341	(% _mstvisible="6" %)
342	342	(((
343	343	(% _mstvisible="7" %)
344		-[[内置>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
	342	+[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
345	345	)))
346	346
347	347	(% _mstvisible="6" %)
348	348	(((
349	349	(% _mstvisible="7" %)
350		-[[湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
	348	+[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
351	351	)))
352	352	)))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
353	353	(((
354	354	(% _mstvisible="6" %)
355		-[[分机>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
	353	+[[Ext>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
356	356	)))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
357	357	(((
358	358	(% _mstvisible="6" %)
359		-[[分机值>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
	357	+[[Ext value>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
360	360	)))
361	361
362	362	(% _mstvisible="1" %)
363		-* 前 6 个字节：对每个 LHT65N 都有固定的含义。
364		-* 第 7 个字节（EXT#）：定义外部传感器型号。
365		-* 第 8 (% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^~~^^(%%) 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^字节^^(%%)：外部传感器值。该定义基于外部传感器类型。（如果EXT=0，就不会有这四个字节。）
	361	+* The First 6 bytes: has fix meanings for every LHT65N.
	362	+* The 7th byte (EXT #): defines the external sensor model.
	363	+* The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
366	366
367		-
368		-
369	369	(% _mstvisible="1" %)
370		-=== (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 TTN V3中的解码器(%%) ===
	366	+=== (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
371	371
372	372	(% _msthash="315251" _msttexthash="9786491" _mstvisible="1" %)
373		-上行payload到达TTNv3时，显示HEX格式，不便于阅读。为了便于阅读，我们可以在 TTNv3 中添加 LHT65N 解码器。
	369	+When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
374	374
375	375	(% _msthash="315252" _msttexthash="3928483" _mstvisible="1" %)
376		-下面是放解码器的位置，LHT65N解码器可以从这里下载：
	372	+Below is the position to put the decoder and LHT65N decoder can be download from here:
377	377
378	378	(% _mstvisible="1" %)
379	379	[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0||_msthash="315253" _msttexthash="3509064" _mstvisible="2"]]
...	...	@@ -384,10 +384,10 @@
384	384
385	385
386	386	(% _mstvisible="1" %)
387		-=== (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-电池信息(%%) ===
	383	+=== (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-Battery Info(%%) ===
388	388
389	389	(% _msthash="315254" _msttexthash="3122912" _mstvisible="1" %)
390		-BAT的这两个字节包括电池状态和实际电压
	386	+These two bytes of BAT include the battery state and the actually voltage
391	391
392	392	(% _mstvisible="1" %)
393	393	[[image:image-20220523152839-18.png||_mstalt="457613" _mstvisible="3"]]
...	...	@@ -396,47 +396,41 @@
396	396	[[image:image-20220522235639-1.png||_mstalt="431392" _mstvisible="3" height="139" width="727"]]
397	397
398	398	(% _msthash="315255" _msttexthash="871611" _mstvisible="1" %)
399		-检查 LHT65N 的电池电压。
	395	+Check the battery voltage for LHT65N.
400	400
401	401	(% _mstvisible="1" %)
402		-* BAT状态=(0Xcba4>>14)&0xFF=11(B)，很好
403		-* 电池电压=0xCBF6&0x3FFF=0x0BA4=2980mV
	398	+* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
	399	+* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
404	404
405		-
406		-
407	407	(% _mstvisible="1" %)
408		-=== (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 内置温度(%%) ===
	402	+=== (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
409	409
410	410	(% _mstvisible="1" %)
411	411	[[image:image-20220522235639-2.png||_mstalt="431756" _mstvisible="3" height="138" width="722"]]
412	412
413	413	(% _mstvisible="1" %)
414		-* 温度：0x0ABB/100=27.47℃
	408	+* Temperature:  0x0ABB/100=27.47℃
415	415
416	416	(% _mstvisible="1" %)
417	417	[[image:image-20220522235639-3.png||_mstalt="432120" _mstvisible="3"]]
418	418
419	419	(% _mstvisible="1" %)
420		-* 温度：(0xF5C6-65536)/100=-26.18℃
	414	+* Temperature:  (0xF5C6-65536)/100=-26.18℃
421	421
422		-
423		-
424	424	(% _mstvisible="1" %)
425		-=== (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 内置湿度(%%) ===
	417	+=== (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
426	426
427	427	(% _mstvisible="1" %)
428	428	[[image:image-20220522235639-4.png||_mstalt="432484" _mstvisible="3" height="138" width="722"]]
429	429
430	430	(% _mstvisible="1" %)
431		-* 湿度：0x025C/10=60.4%
	423	+* Humidity:    0x025C/10=60.4%
432	432
433		-
434		-
435	435	(% _mstvisible="1" %)
436		-=== (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 分机#(%%) ===
	426	+=== (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
437	437
438	438	(% _msthash="315256" _msttexthash="552240" _mstvisible="1" %)
439		-外部传感器的字节数：
	429	+Bytes for External Sensor:
440	440
441	441	(% _mstvisible="1" %)
442	442	[[image:image-20220523152822-17.png||_mstalt="454545" _mstvisible="3"]]
...	...	@@ -443,10 +443,10 @@
443	443
444	444
445	445	(% _mstvisible="1" %)
446		-=== (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 外部值(%%) ===
	436	+=== (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 Ext value(%%) ===
447	447
448	448	(% _mstvisible="1" %)
449		-==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1，E3温度传感器(%%) ====
	439	+==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1, E3 Temperature Sensor(%%) ====
450	450
451	451	(% _mstvisible="1" %)
452	452	[[image:image-20220522235639-5.png||_mstalt="432848" _mstvisible="3"]]
...	...	@@ -453,10 +453,10 @@
453	453
454	454
455	455	(% _mstvisible="1" %)
456		-* DS18B20 温度=0x0ADD/100=27.81℃
	446	+* DS18B20 temp=0x0ADD/100=27.81℃
457	457
458	458	(% _msthash="315257" _msttexthash="1038479" _mstvisible="1" %)
459		-最后 2 个字节的数据没有意义
	449	+The last 2 bytes of data are meaningless
460	460
461	461	(% _mstvisible="1" %)
462	462	[[image:image-20220522235639-6.png||_mstalt="433212" _mstvisible="3"]]
...	...	@@ -463,33 +463,33 @@
463	463
464	464
465	465	(% _mstvisible="1" %)
466		-* 外部温度= (0xF54F-65536)/100=-27.37℃
	456	+* External temperature= (0xF54F-65536)/100=-27.37℃
467	467
468	468	(% _mstvisible="1" %)
469	469	(((
470	470	(% _msthash="506063" _msttexthash="1038479" _mstvisible="2" %)
471		-最后 2 个字节的数据没有意义
	461	+The last 2 bytes of data are meaningless
472	472	)))
473	473
474	474	(% _mstvisible="1" %)
475	475	(((
476	476	(% _msthash="506064" _msttexthash="21185632" _mstvisible="2" %)
477		-如果外部传感器为 0x01，并且没有连接外部温度。温度将设置为 7FFF，即 327.67℃
	467	+If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
478	478	)))
479	479
480	480
481	481
482	482	(% _mstvisible="1" %)
483		-==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9，带 Unix 时间戳的 E3 传感器(%%) ====
	473	+==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
484	484
485	485	(% _msthash="315258" _msttexthash="41539368" _mstvisible="1" %)
486		-时间戳模式是为带有 E3 探针的 LHT65N 设计的，它将发送带有 Unix 时间戳的上行负载。有 11 个字节的限制（AU915/US915/AS923 频段的最大距离），时间戳模式将缺少 BAT 电压字段，而是显示电池状态。有效载荷如下：
	476	+Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
487	487
488	488	(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
489	489	(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 96px;" %)(% _mstvisible="5" %)
490	490	(((
491	491	(% _mstvisible="6" %)
492		-(% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**大小（字节）**
	482	+(% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
493	493	)))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
494	494	(((
495	495	(% _mstvisible="6" %)
...	...	@@ -514,23 +514,23 @@
514	514	(% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
515	515	(((
516	516	(% _mstvisible="6" %)
517		-(% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**价值**
	507	+(% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**Value**
518	518	)))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
519	519	(((
520	520	(% _mstvisible="6" %)
521		-[[外部温度>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
	511	+[[External temperature>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
522	522	)))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
523	523	(((
524	524	(% _mstvisible="6" %)
525	525	(((
526	526	(% _mstvisible="7" %)
527		-[[内置>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
	517	+[[Built-In>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
528	528	)))
529	529
530	530	(% _mstvisible="6" %)
531	531	(((
532	532	(% _mstvisible="7" %)
533		-[[温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
	523	+[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
534	534	)))
535	535	)))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
536	536	(((
...	...	@@ -537,52 +537,52 @@
537	537	(% _mstvisible="6" %)
538	538	(((
539	539	(% _msthash="2224747" _msttexthash="136331" _mstvisible="7" %)
540		-BAT 状态 &
	530	+BAT Status &
541	541	)))
542	542
543	543	(% _mstvisible="6" %)
544	544	(((
545	545	(% _mstvisible="7" %)
546		-[[内置湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
	536	+[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
547	547	)))
548	548	)))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
549	549	(((
550	550	(% _msthash="1817496" _msttexthash="147225" _mstvisible="6" %)
551		-状态和分机
	541	+Status & Ext
552	552	)))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
553	553	(((
554	554	(% _mstvisible="6" %)
555	555	(((
556	556	(% _mstvisible="7" %)
557		-[[Unix 时间戳>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
	547	+[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
558	558	)))
559	559	)))
560	560
561	561	(% _mstvisible="1" %)
562		-* (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**电池状态和 **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**内置湿度**
	552	+* (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**Battery status & **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**
563	563
564	564	(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:469px" %)
565		-(% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)位（位）|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
566		-(% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)价值|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
	555	+(% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)Bit(bit)|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
	556	+(% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)Value|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
567	567	(((
568	568	(% _msthash="1817497" _msttexthash="128427" _mstvisible="6" %)
569		-BAT 状态
	559	+BAT Status
570	570
571	571	(% _msthash="1817498" _msttexthash="472784" _mstvisible="6" %)
572		-00(b)：超低（BAT <= 2.50v）
	562	+00(b): Ultra Low ( BAT <= 2.50v)
573	573
574	574	(% _msthash="1817499" _msttexthash="483678" _mstvisible="6" %)
575		-01(b)：低（2.50v <=BAT <= 2.55v）
	565	+01(b): Low  (2.50v <=BAT <= 2.55v)
576	576
577	577	(% _msthash="1817500" _msttexthash="440791" _mstvisible="6" %)
578		-10（b）：正常（2.55v <= BAT <=2.65v）
	568	+10(b): OK   (2.55v <= BAT <=2.65v)
579	579
580	580	(% _msthash="1817501" _msttexthash="334191" _mstvisible="6" %)
581		-11(b)：好（BAT >= 2.65v）
	571	+11(b): Good   (BAT >= 2.65v)
582	582	)))|(% _mstvisible="4" style="width:134px" %)(% _mstvisible="5" %)
583	583	(((
584	584	(% _mstvisible="6" %)
585		-[[内置湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
	575	+[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
586	586
587	587	(% _mstvisible="6" %)
588	588
...	...	@@ -589,38 +589,38 @@
589	589	)))
590	590
591	591	(% _mstvisible="1" %)
592		-* (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**状态和外部字节**
	582	+* (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**Status & Ext Byte**
593	593
594	594	(% _mstvisible="1" %)
595	595	[[image:image-20220523152434-16.png||_mstalt="453921" _mstvisible="3"]]
596	596
597	597	(% _mstvisible="1" %)
598		-* 轮询消息标志：1：此消息是轮询消息回复，0：表示这是正常上行。
599		-* 同步时间OK：1：设定时间OK，0：N/A。发送时间 SYNC 请求后，LHT65N 会将该位设置为 0，直到从应用服务器获得时间戳。
600		-* Unix时间请求：1：请求服务器下行Unix时间，0：N/A。在此模式下，LHT65N 将每 10 天将该位设置为 1 以请求时间 SYNC。（AT+SYNCMOD 设置此项）
	588	+* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
	589	+* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
	590	+* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
601	601
602	602	(% _mstvisible="1" %)
603		-== (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 在Datacake上显示数据(%%) ==
	593	+== (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
604	604
605	605	(% _msthash="315259" _msttexthash="20933341" _mstvisible="1" %)
606		-Datacake物联网平台提供了一个人性化的界面来展示传感器数据，一旦我们在TTN V3中有传感器数据，我们可以使用Datacake连接到TTN V3并查看Datacake中的数据。以下是步骤：
	596	+Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
607	607
608	608	(% _mstvisible="1" %)
609	609	(((
610	610	(% _msthash="506065" _msttexthash="4753983" _mstvisible="2" %)
611		-(% _mstvisible="3" %)**第 1 步**(%%)：确保您的设备已编程并正确连接到 LoRaWAN 网络。
	601	+(% _mstvisible="3" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
612	612	)))
613	613
614	614	(% _mstvisible="1" %)
615	615	(((
616	616	(% _msthash="506066" _msttexthash="14696682" _mstvisible="2" %)
617		-(% _mstvisible="3" %)**第 2 步**(%%)：配置您的应用程序以将数据转发到 Datacake，您需要添加集成。转到 TTN V3 控制台 ~-~-> 应用程序 ~-~-> 集成 ~-~-> 添加集成。
	607	+(% _mstvisible="3" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
618	618	)))
619	619
620	620	(% _mstvisible="1" %)
621	621	(((
622	622	(% _msthash="506067" _msttexthash="180297" _mstvisible="2" %)
623		-添加数据蛋糕：
	613	+Add Datacake:
624	624	)))
625	625
626	626	(% _mstvisible="1" %)
...	...	@@ -628,13 +628,13 @@
628	628
629	629
630	630	(% _msthash="315260" _msttexthash="750178" _mstvisible="1" %)
631		-选择默认密钥作为访问密钥：
	621	+Select default key as Access Key:
632	632
633	633	(% _mstvisible="1" %)
634	634	[[image:image-20220523000825-8.png||_mstalt="430248" _mstvisible="3" height="453" width="406"]]
635	635
636	636	(% _msthash="315261" _msttexthash="2134964" _mstvisible="1" %)
637		-在 Datacake 控制台 ( [[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]] ) 中，添加 LHT65 设备。
	627	+In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]]) , add LHT65 device.
638	638
639	639	(% _mstvisible="1" %)
640	640	[[image:image-20220523000825-9.png||_mstalt="430612" _mstvisible="3" height="366" width="392"]]
...	...	@@ -645,27 +645,27 @@
645	645
646	646
647	647	(% _mstvisible="1" %)
648		-== (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 数据记录功能(%%) ==
	638	+== (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 Datalog Feature(%%) ==
649	649
650	650	(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
651		-Datalog Feature 是为了确保即使 LoRaWAN 网络出现故障，IoT Server 也可以从 Sensor 获取所有采样数据。对于每次采样，LHT65N 将存储读数以供将来检索。物联网服务器有两种方式从 LHT65N 获取数据日志。
	641	+Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
652	652
653	653
654	654	(% _mstvisible="1" %)
655		-=== (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 通过 LoRaWAN 获取数据日志的方式(%%) ===
	645	+=== (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 Ways to get datalog via LoRaWAN(%%) ===
656	656
657	657	(% _msthash="315263" _msttexthash="409604" _mstvisible="1" %)
658		-有两种方法：
	648	+There are two methods:
659	659
660	660	(% _mstvisible="1" %)
661		-1. IoT Server 发送下行 LoRaWAN 命令以[[轮询>>||anchor="H2.6.4Pollsensorvalue"]]指定时间范围的值。
662		-1. 设置[[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]]，LHT65N每次上行都会等待ACK，当没有LoRaWAN网络时，LHT65N会存储传感器数据，网络恢复后会发送所有消息。
	651	+1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
	652	+1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
663	663
664	664	(% _mstvisible="1" %)
665		-=== (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix时间戳(%%) ===
	655	+=== (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
666	666
667	667	(% _msthash="315264" _msttexthash="1182285" _mstvisible="1" %)
668		-LHT65N 使用 Unix TimeStamp 格式，基于
	658	+LHT65N uses Unix TimeStamp format based on
669	669
670	670	(% _mstvisible="1" %)
671	671	[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
...	...	@@ -674,13 +674,13 @@
674	674	(% _mstvisible="1" %)
675	675	(((
676	676	(% _msthash="506068" _msttexthash="2717234" _mstvisible="2" %)
677		-用户可以从链接获得这个时间：  [[https>>url:https://www.epochconverter.com/||_mstvisible="3"]] :~/~/www.epochconverter.com/ ：
	667	+User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
678	678	)))
679	679
680	680	(% _mstvisible="1" %)
681	681	(((
682	682	(% _msthash="506069" _msttexthash="709813" _mstvisible="2" %)
683		-下面是转换器示例
	673	+Below is the converter example
684	684	)))
685	685
686	686	(% _mstvisible="1" %)
...	...	@@ -687,40 +687,40 @@
687	687	[[image:image-20220523001219-12.png||_mstalt="450827" _mstvisible="3" height="298" width="720"]]
688	688
689	689	(% _msthash="315265" _msttexthash="15137317" _mstvisible="1" %)
690		-所以，我们可以使用 AT+TIMESTAMP=1611889405 或者下行 3060137afd00 来设置当前时间 2021 – Jan ~-~- 29 Friday 03:03:25
	680	+So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
691	691
692	692
693	693	(% _mstvisible="1" %)
694		-=== (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 设置设备时间(%%) ===
	684	+=== (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 Set Device Time(%%) ===
695	695
696	696	(% _mstvisible="1" %)
697	697	(((
698	698	(% _msthash="506070" _msttexthash="4521946" _mstvisible="2" %)
699		-设置设备时间的方法有两种：
	689	+There are two ways to set device’s time:
700	700	)))
701	701
702	702	(% _mstvisible="1" %)
703	703	(((
704	704	(% _mstvisible="2" %)
705		-(% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. 通过 LoRaWAN MAC 命令（默认设置）**
	695	+(% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. Through LoRaWAN MAC Command (Default settings)**
706	706	)))
707	707
708	708	(% _mstvisible="1" %)
709	709	(((
710	710	(% _msthash="506072" _msttexthash="2126267" _mstvisible="2" %)
711		-用户需要通过 MAC 命令设置 SYNCMOD=1 来启用同步时间。
	701	+User need to set SYNCMOD=1 to enable sync time via MAC command.
712	712	)))
713	713
714	714	(% _mstvisible="1" %)
715	715	(((
716	716	(% _msthash="506073" _msttexthash="54430324" _mstvisible="2" %)
717		-一旦 LHT65N 加入 LoRaWAN 网络，它会发送 MAC 命令 (DeviceTimeReq)，服务器会回复 (DeviceTimeAns) 将当前时间发送给 LHT65N。如果 LHT65N 无法从服务器获取时间，LHT65N 将使用内部时间等待下一次请求（AT+SYNCTDC 设置时间请求周期，默认为 10 天）。
	707	+Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
718	718	)))
719	719
720	720	(% _mstvisible="1" %)
721	721	(((
722	722	(% _msthash="506074" _msttexthash="92531127" _mstvisible="2" %)
723		-注意：LoRaWAN 服务器需要支持 LoRaWAN v1.0.3(MAC v1.0.3) 或更高版本才能支持此 MAC 命令功能，Chirpstack、TTN V3 v3 和 loriot 支持但 TTN V3 v2 不支持。如果服务器不支持该命令，它将通过该命令将上行数据包通过，因此如果 SYNCMOD=1，用户将丢失带有时间请求的 TTN V3 v2 数据包。
	713	+Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
724	724	)))
725	725
726	726	(% _mstvisible="1" %)
...	...	@@ -732,13 +732,13 @@
732	732	(% _mstvisible="1" %)
733	733	(((
734	734	(% _mstvisible="2" %)
735		-(% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2.手动设置时间**
	725	+(% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2. Manually Set Time**
736	736	)))
737	737
738	738	(% _mstvisible="1" %)
739	739	(((
740	740	(% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
741		-用户需要手动设置SYNCMOD=0，否则用户设置的时间会被服务器设置的时间覆盖。
	731	+User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
742	742
743	743	(% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
744	744
...	...	@@ -745,10 +745,10 @@
745	745	)))
746	746
747	747	(% _mstvisible="1" %)
748		-=== (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 轮询传感器值(%%) ===
	738	+=== (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 Poll sensor value(%%) ===
749	749
750	750	(% _msthash="315266" _msttexthash="4955821" _mstvisible="1" %)
751		-用户可以根据来自服务器的时间戳轮询传感器值。下面是下行命令。
	741	+User can poll sensor value based on timestamps from the server. Below is the downlink command.
752	752
753	753	(% _mstvisible="1" %)
754	754	[[image:image-20220523152302-15.png||_mstalt="451581" _mstvisible="3"]]
...	...	@@ -756,38 +756,38 @@
756	756	(% _mstvisible="1" %)
757	757	(((
758	758	(% _msthash="506077" _msttexthash="14670916" _mstvisible="2" %)
759		-Timestamp start 和 Timestamp end 使用上面提到的 Unix TimeStamp 格式。设备将在此时间段内回复所有数据日志，使用上行链路间隔。
	749	+Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
760	760	)))
761	761
762	762	(% _mstvisible="1" %)
763	763	(((
764	764	(% _mstvisible="2" %)
765		-例如下行命令(% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
	755	+For example, downlink command (% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
766	766	)))
767	767
768	768	(% _mstvisible="1" %)
769	769	(((
770	770	(% _msthash="506078" _msttexthash="6907459" _mstvisible="2" %)
771		-是检查 2020/12/1 07:40:00 到 2020/12/1 08:40:00 的数据
	761	+Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
772	772	)))
773	773
774	774	(% _mstvisible="1" %)
775	775	(((
776	776	(% _msthash="506079" _msttexthash="23531573" _mstvisible="2" %)
777		-Uplink Internal =5s，表示LHT65N每5s发送一个数据包。范围 5~~255s。
	767	+Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
778	778	)))
779	779
780	780
781	781	(% _mstvisible="1" %)
782		-=== (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 数据日志上行有效载荷(%%) ===
	772	+=== (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 Datalog Uplink payload(%%) ===
783	783
784	784	(% _msthash="315267" _msttexthash="2245087" _mstvisible="1" %)
785		-Datalog 轮询回复上行链路将使用以下有效负载格式。
	775	+The Datalog poll reply uplink will use below payload format.
786	786
787	787	(% _mstvisible="1" %)
788	788	(((
789	789	(% _mstvisible="2" %)
790		-(% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**检索数据有效载荷**
	780	+(% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**Retrieval data payload**
791	791	)))
792	792
793	793	(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
...	...	@@ -796,7 +796,7 @@
796	796	(% _mstvisible="6" %)
797	797	(((
798	798	(% _mstvisible="7" %)
799		-(% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**大小（字节）**
	789	+(% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**Size(bytes)**
800	800	)))
801	801	)))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
802	802	(((
...	...	@@ -839,7 +839,7 @@
839	839	(% _mstvisible="6" %)
840	840	(((
841	841	(% _mstvisible="7" %)
842		-(% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**价值**
	832	+(% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**Value**
843	843	)))
844	844	)))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
845	845	(((
...	...	@@ -846,7 +846,7 @@
846	846	(% _mstvisible="6" %)
847	847	(((
848	848	(% _mstvisible="7" %)
849		-[[外部传感器数据>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
	839	+[[External sensor data>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
850	850	)))
851	851	)))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
852	852	(((
...	...	@@ -855,7 +855,7 @@
855	855	(% _mstvisible="7" %)
856	856	(((
857	857	(% _mstvisible="8" %)
858		-[[内置>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
	848	+[[Built In>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
859	859	)))
860	860	)))
861	861
...	...	@@ -864,7 +864,7 @@
864	864	(% _mstvisible="7" %)
865	865	(((
866	866	(% _mstvisible="8" %)
867		-[[温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
	857	+[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
868	868	)))
869	869	)))
870	870	)))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
...	...	@@ -874,7 +874,7 @@
874	874	(% _mstvisible="7" %)
875	875	(((
876	876	(% _mstvisible="8" %)
877		-[[内置>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
	867	+[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
878	878	)))
879	879	)))
880	880
...	...	@@ -883,7 +883,7 @@
883	883	(% _mstvisible="7" %)
884	884	(((
885	885	(% _mstvisible="8" %)
886		-[[湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
	876	+[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
887	887	)))
888	888	)))
889	889	)))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
...	...	@@ -891,7 +891,7 @@
891	891	(% _mstvisible="6" %)
892	892	(((
893	893	(% _msthash="2224758" _msttexthash="390390" _mstvisible="7" %)
894		-轮询消息标志和分机
	884	+Poll message flag & Ext
895	895	)))
896	896	)))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
897	897	(((
...	...	@@ -900,7 +900,7 @@
900	900	(% _mstvisible="7" %)
901	901	(((
902	902	(% _mstvisible="8" %)
903		-[[Unix 时间戳>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
	893	+[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
904	904	)))
905	905	)))
906	906
...	...	@@ -915,7 +915,7 @@
915	915	)))
916	916
917	917	(% _mstvisible="1" %)
918		-(% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**轮询消息标志和分机**
	908	+(% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**Poll message flag & Ext**
919	919
920	920	(% _mstvisible="1" %)
921	921	[[image:image-20220523152208-14.png||_mstalt="452920" _mstvisible="3"]]
...	...	@@ -925,7 +925,7 @@
925	925	(% _mstvisible="2" %)
926	926	(((
927	927	(% _msthash="736723" _msttexthash="2005003" _mstvisible="3" %)
928		-轮询消息标志： 1：此消息是轮询消息回复。
	918	+Poll Message Flag: 1: This message is a poll message reply.
929	929	)))
930	930	)))
931	931
...	...	@@ -935,7 +935,7 @@
935	935	(% _mstvisible="4" %)
936	936	(((
937	937	(% _msthash="1197157" _msttexthash="561548" _mstvisible="5" %)
938		-轮询消息标志设置为 1。
	928	+Poll Message Flag is set to 1.
939	939	)))
940	940	)))
941	941	* (% _mstvisible="3" %)
...	...	@@ -943,7 +943,7 @@
943	943	(% _mstvisible="4" %)
944	944	(((
945	945	(% _msthash="1197158" _msttexthash="9284964" _mstvisible="5" %)
946		-每个数据条目为 11 个字节，为了节省通话时间和电池，设备将根据当前的 DR 和频段发送最大字节数。
	936	+Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
947	947	)))
948	948	)))
949	949
...	...	@@ -955,7 +955,7 @@
955	955
956	956
957	957	(% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
958		-例如，在 US915 频段，不同 DR 的最大有效载荷为：
	948	+For example, in US915 band, the max payload for different DR is:
959	959	)))
960	960	)))
961	961
...	...	@@ -964,7 +964,7 @@
964	964	(% _mstvisible="2" %)
965	965	(((
966	966	(% _msthash="736725" _msttexthash="1065532" _mstvisible="3" %)
967		-a) DR0：最大为 11 个字节，因此一个数据条目
	957	+a) DR0: max is 11 bytes so one entry of data
968	968	)))
969	969	)))
970	970
...	...	@@ -973,7 +973,7 @@
973	973	(% _mstvisible="2" %)
974	974	(((
975	975	(% _msthash="736726" _msttexthash="3265665" _mstvisible="3" %)
976		-b) DR1：最大为 53 字节，因此设备将上传 4 个数据条目（共 44 字节）
	966	+b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
977	977	)))
978	978	)))
979	979
...	...	@@ -982,7 +982,7 @@
982	982	(% _mstvisible="2" %)
983	983	(((
984	984	(% _msthash="736727" _msttexthash="1454115" _mstvisible="3" style="text-align: left;" %)
985		-c) DR2：总有效载荷包括 11 个数据条目
	975	+c) DR2: total payload includes 11 entries of data
986	986	)))
987	987	)))
988	988
...	...	@@ -991,7 +991,7 @@
991	991	(% _mstvisible="2" %)
992	992	(((
993	993	(% _msthash="736728" _msttexthash="1483924" _mstvisible="3" style="text-align: left;" %)
994		-d) DR3：总有效载荷包括 22 个数据条目。
	984	+d) DR3: total payload includes 22 entries of data.
995	995	)))
996	996	)))
997	997
...	...	@@ -1000,16 +1000,16 @@
1000	1000	(% _mstvisible="2" %)
1001	1001	(((
1002	1002	(% _msthash="736729" _msttexthash="5848349" _mstvisible="3" style="text-align: left;" %)
1003		-如果设计在轮询时间内没有任何数据。设备将上行 11 个字节的 0
	993	+If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0
1004	1004	)))
1005	1005	)))
1006	1006
1007	1007
1008	1008	(% _mstvisible="1" style="text-align: left;" %)
1009		-(% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**例子：**
	999	+(% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**Example:**
1010	1010
1011	1011	(% _msthash="315270" _msttexthash="913822" _mstvisible="1" style="text-align: left;" %)
1012		-如果 LHT65N 在 Flash 中有以下数据：
	1002	+If LHT65N has below data inside Flash:
1013	1013
1014	1014	(% _mstvisible="1" %)
1015	1015	[[image:image-20220523144455-1.png||_mstalt="430040" _mstvisible="3" height="335" width="735"]]
...	...	@@ -1017,19 +1017,19 @@
1017	1017	(% _mstvisible="1" %)
1018	1018	(((
1019	1019	(% _msthash="506081" _msttexthash="1663961" _mstvisible="2" style="text-align: left;" %)
1020		-如果用户发送以下下行命令： (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
	1010	+If user sends below downlink command: (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
1021	1021	)))
1022	1022
1023	1023	(% _mstvisible="1" %)
1024	1024	(((
1025	1025	(% _msthash="506082" _msttexthash="1092494" _mstvisible="2" style="text-align: left;" %)
1026		- 其中：开始时间：60065F97 = 时间 21/1/19 04:27:03
	1016	+ Where : Start time: 60065F97 = time 21/1/19 04:27:03
1027	1027	)))
1028	1028
1029	1029	(% _mstvisible="1" %)
1030	1030	(((
1031	1031	(% _msthash="506083" _msttexthash="737269" _mstvisible="2" style="text-align: left;" %)
1032		- 停止时间 60066DA7= 时间 21/1/19 (% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)05:27:03
	1022	+ Stop time 60066DA7= time 21/1/19 05:27:(% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)03
1033	1033	)))
1034	1034
1035	1035	(% _mstvisible="1" %)
...	...	@@ -1041,7 +1041,7 @@
1041	1041	(% _mstvisible="1" %)
1042	1042	(((
1043	1043	(% _msthash="506084" _msttexthash="751218" _mstvisible="2" style="text-align: left;" %)
1044		-LHT65N 将上传此有效载荷。
	1034	+LHT65N will uplink this payload.
1045	1045	)))
1046	1046
1047	1047	(% _mstvisible="1" %)
...	...	@@ -1050,79 +1050,72 @@
1050	1050	(% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
1051	1051	7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1052	1052
1053		-(% _msthash="315237" _msttexthash="1385839" %)
1054		-其中前 11 个字节用于第一个条目：
	1043	+Where the first 11 bytes is for the first entry:
1055	1055
1056		-(% _msthash="315238" _msttexthash="274846" %)
1057	1057	7FFF089801464160065F97
1058	1058
1059		-(% _msthash="315239" _msttexthash="617435" %)
1060		-外部传感器数据=0x7FFF/100=327.67
	1047	+Ext sensor data=0x7FFF/100=327.67
1061	1061
1062		-(% _msthash="315240" _msttexthash="270543" %)
1063		-温度=0x0898/100=22.00
	1049	+Temp=0x0898/100=22.00
1064	1064
1065		-(% _msthash="315241" _msttexthash="211783" %)
1066		-嗡嗡声=0x0146/10=32.6
	1051	+Hum=0x0146/10=32.6
1067	1067
1068		-(% _msthash="315242" _msttexthash="1569776" %)
1069		-poll message flag & Ext=0x41,表示回复数据,Ext=1
	1053	+poll message flag & Ext=0x41,means reply data,Ext=1
1070	1070
1071		-(% _msthash="315243" _msttexthash="1120509" %)
1072		-Unix 时间是 0x60065F97=1611030423s=21/1/19 04:27:03
	1055	+Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1073	1073
1074	1074
1075	1075	(% _mstvisible="1" style="text-align: left;" %)
1076		-== (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 报警方式(%%) ==
	1059	+== (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 Alarm Mode(%%) ==
1077	1077
1078	1078	(% _msthash="315279" _msttexthash="16493308" _mstvisible="1" style="text-align: left;" %)
1079		-当设备处于报警模式时，它会在短时间内检查内置传感器温度。如果温度超过预先配置的范围，它会立即发送上行链路。
	1062	+when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
1080	1080
1081	1081	(% _mstvisible="1" %)
1082	1082	(((
1083	1083	(% _mstvisible="2" style="text-align: left;" %)
1084		-(% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)注意：闹钟模式会增加一点功耗，建议开启此功能后延长正常读取时间。
	1067	+(% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.
1085	1085	)))
1086	1086
1087	1087	(% _mstvisible="1" style="text-align: left;" %)
1088		-(% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**警报模式的命令：**
	1071	+(% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**AT COMMAND FOR ALARM MODE:**
1089	1089
1090	1090	(% _mstvisible="1" class="box infomessage" %)
1091	1091	(((
1092	1092	(% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1093		-(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%)：启用/禁用报警模式。（0：禁用，1：启用）
	1076	+(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1094	1094
1095	1095	(% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1096		-(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%)：检测报警温度的时间间隔。（以分钟为单位）
	1079	+(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1097	1097
1098	1098	(% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1099		-(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%)：获取或设置内部温度传感器的报警范围
	1082	+(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1100	1100
1101	1101	(% _mstvisible="2" style="text-align: left;" %)
1102		-(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%)：获取内部温度传感器的报警范围(% _mstvisible="3" style="display:none" %)
	1085	+(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1103	1103
1104	1104	(% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1105		-(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%)：设置内部温度传感器报警范围从 45 到 105。
	1088	+(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1106	1106	)))
1107	1107
1108	1108
1109	1109
1110	1110	(% _msthash="72514" _msttexthash="253149" _mstvisible="1" style="text-align: left;" %)
1111		-== (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%) LED 指示灯 ==
	1094	+== (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%)LED Indicator ==
1112	1112
1113	1113	(% _mstvisible="1" %)
1114	1114	(((
1115	1115	(% _msthash="197769" _msttexthash="2924142" style="text-align: left;" %)
1116		-LHT65有一个三色LED，便于显示不同的阶段。
	1099	+The LHT65 has a triple color LED which for easy showing different stage .
1117	1117
1118	1118	(% _msthash="289211" _msttexthash="3402659" style="text-align: left;" %)
1119		-当用户按下 ACT 按钮时，LED 将根据 ACT 按钮的 LED 状态工作。
	1102	+While user press ACT button, the LED will work as per LED status with ACT button.
1120	1120	)))
1121	1121
1122	1122	(% _mstvisible="1" %)
1123	1123	(((
1124	1124	(% _msthash="506092" _msttexthash="521573" _mstvisible="2" style="text-align: left;" %)
1125		-正常工作状态下：
	1108	+In a normal working state:
1126	1126	)))
1127	1127
1128	1128	(% _mstvisible="1" %)
...	...	@@ -1129,20 +1129,20 @@
1129	1129	* (% _mstvisible="3" %)
1130	1130	(((
1131	1131	(% _msthash="903005" _msttexthash="1647204" _mstvisible="4" %)
1132		-对于每个上行链路，蓝色 LED 或红色 LED 将闪烁(% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)一次(%%)。(% style="display:none" %)
	1115	+For each uplink, the BLUE LED or RED LED will blink (% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)once(%%).(% style="display:none" %)
1133	1133
1134	1134	(% _msthash="197771" _msttexthash="1202526" %)
1135		-(% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)连接外部传感器时的蓝色 LED
	1118	+(% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)BLUE LED when external sensor is connected
1136	1136	)))
1137	1137	* (% _mstvisible="3" %)
1138	1138	(((
1139	1139	(% _msthash="903007" _msttexthash="1334749" _mstvisible="4" %)
1140		-未连接外部传感器时的红色 LED
	1123	+RED LED when external sensor is not connected
1141	1141	)))
1142	1142	* (% _mstvisible="3" %)
1143	1143	(((
1144	1144	(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1145		-对于每次成功的下行链路，紫色 LED 将闪烁一次
	1128	+For each success downlink, the PURPLE LED will blink once
1146	1146
1147	1147
1148	1148
...	...	@@ -1152,7 +1152,7 @@
1152	1152	)))
1153	1153
1154	1154	(% _mstvisible="1" style="text-align: left;" %)
1155		-== (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 安装(%%) ==
	1138	+== (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 installation(%%) ==
1156	1156
1157	1157	(% _mstvisible="1" %)
1158	1158	[[image:image-20220516231650-1.png||_mstalt="428597" _mstvisible="3" height="436" width="428"]]
...	...	@@ -1159,10 +1159,10 @@
1159	1159
1160	1160
1161	1161	(% _msthash="604150" _msttexthash="563212" _mstvisible="1" style="text-align: left;" %)
1162		-= (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3.(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)传感器(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) 和(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)附件(%%) =
	1145	+= (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1163	1163
1164	1164	(% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1165		-== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1 (% _msthash="487110" _msttexthash="455390" %) E3 温度探头(%%) ==
	1148	+== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
1166	1166
1167	1167	(% _mstvisible="1" %)
1168	1168	[[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
...	...	@@ -1169,23 +1169,23 @@
1169	1169
1170	1170
1171	1171	(% _msthash="315354" _msttexthash="1270971" _mstvisible="1" style="text-align: left;" %)
1172		-带有 2 米长电缆的温度传感器
	1155	+Temperature sensor with 2 meters cable long
1173	1173
1174	1174	(% _mstvisible="1" %)
1175		-* 分辨率：0.0625 °C
1176		-* -10°C 至 +85°C 的 ±0.5°C 精度
1177		-* -55°C 至 +125°C 的 ±2°C 精度
1178		-* 工作范围：-40 ~~ 125 °C
1179		-* -55°C 至 125°C
1180		-* 工作电压2.35v～5v
	1158	+* Resolution: 0.0625 °C
	1159	+* ±0.5°C accuracy from -10°C to +85°C
	1160	+* ±2°C accuracy from -55°C to +125°C
	1161	+* Operating Range: -40 ~~ 125 °C
	1162	+* -55°C to 125°C
	1163	+* Working voltage 2.35v ~~ 5v
1181	1181
1182	1182	(% _mstvisible="1" style="text-align: left;" %)
1183		-= (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4.通过AT指令或LoRaWAN下行配置LHT65N(%%) =
	1166	+= (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1184	1184
1185	1185	(% _mstvisible="1" %)
1186	1186	(((
1187	1187	(% _msthash="506246" _msttexthash="2005926" _mstvisible="2" style="text-align: left;" %)
1188		-使用可以通过 AT 命令或 LoRaWAN Downlink 配置 LHT65N。
	1171	+Use can configure LHT65N via AT Command or LoRaWAN Downlink.
1189	1189	)))
1190	1190
1191	1191	(% _mstvisible="1" %)
...	...	@@ -1192,12 +1192,12 @@
1192	1192	* (% _mstvisible="3" %)
1193	1193	(((
1194	1194	(% _msthash="903318" _msttexthash="635544" _mstvisible="4" %)
1195		-AT 命令连接：请参阅[[常见问题解答>>||anchor="H6.FAQ"]]。
	1178	+AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
1196	1196	)))
1197	1197	* (% _mstvisible="3" %)
1198	1198	(((
1199		-(% _msthash="903319" _msttexthash="3225859" _mstvisible="4" %)
1200		-不同平台的LoRaWAN下行指令：[[IoT LoRaWAN Server>>doc:Main.WebHome]]
	1182	+(% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
	1183	+LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
1201	1201	)))
1202	1202
1203	1203	(% _mstvisible="1" %)
...	...	@@ -1209,19 +1209,19 @@
1209	1209	(% _mstvisible="1" %)
1210	1210	(((
1211	1211	(% _msthash="506248" _msttexthash="2144051" _mstvisible="2" style="text-align: left;" %)
1212		-有两种配置 LHT65N 的命令，它们是：
	1195	+There are two kinds of commands to configure LHT65N, they are:
1213	1213	)))
1214	1214
1215	1215	(% _mstvisible="1" %)
1216	1216	(((
1217	1217	(% _mstvisible="2" style="text-align: left;" %)
1218		-(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**一般命令**(% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)。
	1201	+(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1219	1219	)))
1220	1220
1221	1221	(% _mstvisible="1" %)
1222	1222	(((
1223	1223	(% _msthash="506250" _msttexthash="774527" _mstvisible="2" style="text-align: left;" %)
1224		-这些命令用于配置：
	1207	+These commands are to configure:
1225	1225	)))
1226	1226
1227	1227	(% _mstvisible="1" %)
...	...	@@ -1228,18 +1228,18 @@
1228	1228	* (% _mstvisible="3" %)
1229	1229	(((
1230	1230	(% _msthash="903320" _msttexthash="1503580" _mstvisible="4" %)
1231		-常规系统设置，例如：上行链路间隔。
	1214	+General system settings like: uplink interval.
1232	1232	)))
1233	1233	* (% _mstvisible="3" %)
1234	1234	(((
1235	1235	(% _msthash="903321" _msttexthash="1244334" _mstvisible="4" %)
1236		-LoRaWAN 协议和无线电相关命令。
	1219	+LoRaWAN protocol & radio-related commands.
1237	1237	)))
1238	1238
1239	1239	(% _mstvisible="1" %)
1240	1240	(((
1241		-(% _msthash="506251" _msttexthash="12349142" _mstvisible="2" style="text-align: left;" %)
1242		-对于所有支持 DLWS-005 LoRaWAN Stack（注~*~*）的 Dragino 设备，它们都是相同的。这些命令可以在 wiki 上找到：  [[End Device Downlink 命令>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
	1224	+(% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
	1225	+They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1243	1243	)))
1244	1244
1245	1245	(% _mstvisible="1" %)
...	...	@@ -1251,13 +1251,13 @@
1251	1251	(% _mstvisible="1" %)
1252	1252	(((
1253	1253	(% _mstvisible="2" style="text-align: left;" %)
1254		-(% _mstvisible="3" style="color:#4f81bd" %)*  (% _msthash="506054" _msttexthash="792038" %)**LHT65N的指令特殊设计**
	1237	+(% _mstvisible="3" style="color:#4f81bd" %)* **Commands special design for LHT65N**
1255	1255	)))
1256	1256
1257	1257	(% _mstvisible="1" %)
1258	1258	(((
1259	1259	(% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1260		-这些命令仅对 LHT65N 有效，如下：
	1243	+These commands are only valid for LHT65N, as below:
1261	1261
1262	1262
1263	1263	(% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
...	...	@@ -1265,13 +1265,13 @@
1265	1265	)))
1266	1266
1267	1267	(% _mstvisible="1" style="text-align: left;" %)
1268		-== (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 设置发送间隔时间(%%) ==
	1251	+== (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 Set Transmit Interval Time(%%) ==
1269	1269
1270	1270	(% _msthash="315355" _msttexthash="1659268" _mstvisible="1" style="text-align: left;" %)
1271		-功能：更改 LoRaWAN 端节点传输间隔。
	1254	+Feature: Change LoRaWAN End Node Transmit Interval.
1272	1272
1273	1273	(% _mstvisible="1" style="text-align: left;" %)
1274		-(% _msthash="315244" _msttexthash="241696" style="color:#4f81bd" %)**AT指令：AT+TDC**
	1257	+(% style="color:#4f81bd" %)**AT Command: AT+TDC**
1275	1275
1276	1276	(% _mstvisible="1" %)
1277	1277	[[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
...	...	@@ -1282,19 +1282,19 @@
1282	1282
1283	1283
1284	1284	(% _mstvisible="2" style="text-align: left;" %)
1285		-(% _msthash="506055" _msttexthash="381992" style="color:#4f81bd" %)**下行命令：0x01**
	1268	+(% style="color:#4f81bd" %)**Downlink Command: 0x01**
1286	1286	)))
1287	1287
1288	1288	(% _mstvisible="1" %)
1289	1289	(((
1290	1290	(% _msthash="506256" _msttexthash="1996592" _mstvisible="2" style="text-align: left;" %)
1291		-格式：命令代码 (0x01) 后跟 3 个字节的时间值。
	1274	+Format: Command Code (0x01) followed by 3 bytes time value.
1292	1292	)))
1293	1293
1294	1294	(% _mstvisible="1" %)
1295	1295	(((
1296	1296	(% _msthash="506257" _msttexthash="12934649" _mstvisible="2" style="text-align: left;" %)
1297		-如果下行payload=0100003C，表示设置END Node的Transmit Interval为0x00003C=60(S)，type code为01。
	1280	+If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1298	1298	)))
1299	1299
1300	1300	(% _mstvisible="1" %)
...	...	@@ -1301,12 +1301,12 @@
1301	1301	* (% _mstvisible="3" %)
1302	1302	(((
1303	1303	(% _msthash="903322" _msttexthash="3250546" _mstvisible="4" %)
1304		-(% _mstvisible="5" %)**示例 1**(%%)：下行链路有效负载：0100001E ~/~/ 设置传输间隔 (TDC) = 30 秒
	1287	+(% _mstvisible="5" %)**Example 1**(%%): Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1305	1305	)))
1306	1306	* (% _mstvisible="3" %)
1307	1307	(((
1308	1308	(% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1309		-(% _mstvisible="5" %)**示例 2**(%%)：下行链路有效负载：0100003C ~/~/ 设置传输间隔 (TDC) = 60 秒
	1292	+(% _mstvisible="5" %)**Example 2**(%%): Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1310	1310
1311	1311
1312	1312	(% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
...	...	@@ -1314,13 +1314,13 @@
1314	1314	)))
1315	1315
1316	1316	(% _mstvisible="1" style="text-align: left;" %)
1317		-== (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 设置外部传感器模式(%%) ==
	1300	+== (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 Set External Sensor Mode(%%) ==
1318	1318
1319	1319	(% _msthash="315357" _msttexthash="975117" _mstvisible="1" style="text-align: left;" %)
1320		-功能：更改外部传感器模式。
	1303	+Feature: Change External Sensor Mode.
1321	1321
1322	1322	(% _mstvisible="1" style="text-align: left;" %)
1323		-(% _msthash="315245" _msttexthash="248118" style="color:#4f81bd" %)**AT指令：AT+EXT**
	1306	+(% style="color:#4f81bd" %)**AT Command: AT+EXT**
1324	1324
1325	1325	(% _mstvisible="1" %)
1326	1326	[[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
...	...	@@ -1331,19 +1331,19 @@
1331	1331
1332	1332
1333	1333	(% _mstvisible="2" style="text-align: left;" %)
1334		-(% _msthash="506056" _msttexthash="387855" style="color:#4f81bd" %)**下行命令：0xA2**
	1317	+(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
1335	1335	)))
1336	1336
1337	1337	(% _mstvisible="1" %)
1338	1338	(((
1339	1339	(% _msthash="506259" _msttexthash="395629" _mstvisible="2" style="text-align: left;" %)
1340		-总字节数：2~~5字节
	1323	+Total bytes: 2 ~~ 5 bytes
1341	1341	)))
1342	1342
1343	1343	(% _mstvisible="1" %)
1344	1344	(((
1345	1345	(% _mstvisible="2" %)
1346		-(% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**例子：**
	1329	+(% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**Example:**
1347	1347	)))
1348	1348
1349	1349	(% _mstvisible="1" %)
...	...	@@ -1350,17 +1350,17 @@
1350	1350	* (% _mstvisible="3" %)
1351	1351	(((
1352	1352	(% _msthash="903324" _msttexthash="934973" _mstvisible="4" %)
1353		-0xA201：将外部传感器类型设置为 E1
	1336	+0xA201: Set external sensor type to E1
1354	1354	)))
1355	1355	* (% _mstvisible="3" %)
1356	1356	(((
1357	1357	(% _msthash="903325" _msttexthash="354770" _mstvisible="4" %)
1358		-0xA209: 同 AT+EXT=9
	1341	+0xA209: Same as AT+EXT=9
1359	1359	)))
1360	1360	* (% _mstvisible="3" %)
1361	1361	(((
1362	1362	(% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1363		-0xA20702003c,同 AT+SETCNT=60
	1346	+0xA20702003c,Same as AT+SETCNT=60
1364	1364
1365	1365
1366	1366	(% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
...	...	@@ -1368,20 +1368,20 @@
1368	1368	)))
1369	1369
1370	1370	(% _mstvisible="1" style="text-align: left;" %)
1371		-== (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 启用/禁用上行温度探测器 ID(%%) ==
	1354	+== (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 Enable/Disable uplink Temperature probe ID(%%) ==
1372	1372
1373	1373	(% _msthash="315359" _msttexthash="2977572" _mstvisible="1" style="text-align: left;" %)
1374		-功能：如果启用 PID，设备将发送温度探测器 ID：
	1357	+Feature: If PID is enabled, device will send the temperature probe ID on:
1375	1375
1376	1376	(% _mstvisible="1" %)
1377		-* OTAA 加入后的第一个数据包
1378		-* 自第一个数据包后每 24 小时。
	1360	+* First Packet after OTAA Join
	1361	+* Every 24 hours since the first packet.
1379	1379
1380	1380	(% _msthash="315360" _msttexthash="658814" _mstvisible="1" style="text-align: left;" %)
1381		-PID 默认设置为禁用 (0)
	1364	+PID is default set to disable (0)
1382	1382
1383	1383	(% _mstvisible="1" style="text-align: left;" %)
1384		-(% _msthash="315246" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
	1367	+(% style="color:#4f81bd" %)**AT Command:**
1385	1385
1386	1386	(% _mstvisible="1" %)
1387	1387	[[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
...	...	@@ -1388,20 +1388,20 @@
1388	1388
1389	1389
1390	1390	(% _mstvisible="1" style="text-align: left;" %)
1391		-(% _msthash="315247" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1374	+(% style="color:#4f81bd" %)**Downlink Command:**
1392	1392
1393	1393	(% _mstvisible="1" %)
1394		-* 0xA800  **~-~->** AT+PID=0
1395		-* 0xA801     **~-~->** AT+PID=1
	1377	+* 0xA800  **~-~->** AT+PID=0
	1378	+* 0xA801     **~-~->** AT+PID=1
1396	1396
1397	1397	(% _mstvisible="1" style="text-align: left;" %)
1398		-== (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 设置密码(%%) ==
	1381	+== (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1399	1399
1400	1400	(% _msthash="315363" _msttexthash="1170728" _mstvisible="1" style="text-align: left;" %)
1401		-功能：设置设备密码，最多9位
	1384	+Feature: Set device password, max 9 digits
1402	1402
1403	1403	(% _mstvisible="1" style="text-align: left;" %)
1404		-(% _msthash="315248" _msttexthash="295009" style="color:#4f81bd" %)**AT 命令：AT+PWORD**
	1387	+(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
1405	1405
1406	1406	(% _mstvisible="1" %)
1407	1407	[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
...	...	@@ -1412,13 +1412,13 @@
1412	1412
1413	1413
1414	1414	(% _mstvisible="2" style="text-align: left;" %)
1415		-(% _msthash="506057" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1398	+(% style="color:#4f81bd" %)**Downlink Command:**
1416	1416	)))
1417	1417
1418	1418	(% _mstvisible="1" %)
1419	1419	(((
1420	1420	(% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1421		-此功能没有下行链路命令。
	1404	+No downlink command for this feature.
1422	1422
1423	1423	(% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1424	1424
...	...	@@ -1425,13 +1425,13 @@
1425	1425	)))
1426	1426
1427	1427	(% _mstvisible="1" style="text-align: left;" %)
1428		-== (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 退出 AT 命令(%%) ==
	1411	+== (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 Quit AT Command(%%) ==
1429	1429
1430	1430	(% _msthash="315365" _msttexthash="4616456" _mstvisible="1" style="text-align: left;" %)
1431		-特点：退出 AT 命令模式，用户在使用 AT 命令前需要再次输入密码。
	1414	+Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1432	1432
1433	1433	(% _mstvisible="1" style="text-align: left;" %)
1434		-(% _msthash="315249" _msttexthash="289120" style="color:#4f81bd" %)**AT指令：AT+DISAT**
	1417	+(% style="color:#4f81bd" %)**AT Command: AT+DISAT**
1435	1435
1436	1436	(% _mstvisible="1" %)
1437	1437	[[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
...	...	@@ -1438,41 +1438,42 @@
1438	1438
1439	1439
1440	1440	(% _mstvisible="1" style="text-align: left;" %)
1441		-(% _msthash="315250" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1424	+(% style="color:#4f81bd" %)**Downlink Command:**
1442	1442
1443	1443	(% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1444		-此功能没有下行链路命令。
	1427	+No downlink command for this feature.
1445	1445
1446	1446
1447	1447	(% _mstvisible="1" style="text-align: left;" %)
1448		-== (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 设置为睡眠模式(%%) ==
	1431	+== (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 Set to sleep mode(%%) ==
1449	1449
1450	1450	(% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
1451		-功能：将设备设置为睡眠模式
	1434	+Feature: Set device to sleep mode
1452	1452
1453		-* AT+Sleep=0 : 正常工作模式，没有 LoRa 消息时设备会休眠并使用较低功率
1454		-* AT+Sleep=1 ：设备处于深度睡眠模式，没有发生 LoRa 激活，用于存储或运输。
	1436	+* AT+Sleep=0  : Normal working mode, device will sleep and use lower power when there is no LoRa message
	1437	+* AT+Sleep=1 : Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
1455	1455
1456	1456	(% _mstvisible="1" style="text-align: left;" %)
1457		-(% _msthash="315251" _msttexthash="289783" style="color:#4f81bd" %)**AT指令：AT+SLEEP**
	1440	+(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1458	1458
1459	1459	(% _mstvisible="1" %)
1460	1460	[[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1461	1461
1462	1462	(% _mstvisible="1" %)
1463		-(% _msthash="315252" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1446	+(% style="color:#4f81bd" %)**Downlink Command:**
1464	1464
1465	1465	(% _mstvisible="1" %)
1466		-* 没有设置为睡眠模式的下行链路命令。
	1449	+* There is no downlink command to set to Sleep mode.
1467	1467
	1451	+
1468	1468	(% _mstvisible="1" %)
1469		-== (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 设置系统时间(%%) ==
	1453	+== (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1470	1470
1471	1471	(% _msthash="315372" _msttexthash="2565524" _mstvisible="1" %)
1472		-特点：设置系统时间，unix格式。[[有关格式的详细信息，请参见此处。>>||anchor="H2.6.2UnixTimeStamp"]]
	1456	+Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
1473	1473
1474	1474	(% _mstvisible="1" %)
1475		-(% _msthash="315253" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
	1459	+(% style="color:#4f81bd" %)**AT Command:**
1476	1476
1477	1477	(% _mstvisible="1" %)
1478	1478	[[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
...	...	@@ -1479,31 +1479,31 @@
1479	1479
1480	1480
1481	1481	(% _mstvisible="1" %)
1482		-(% _msthash="315254" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1466	+(% style="color:#4f81bd" %)**Downlink Command:**
1483	1483
1484	1484	(% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1485		-0x306007806000 ~/~/ 设置时间戳为0x(6007806000)，同AT+TIMESTAMP=1611104352
	1469	+0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
1486	1486
1487	1487
1488	1488	(% _mstvisible="1" %)
1489		-== (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 设置时间同步模式(%%) ==
	1473	+== (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 Set Time Sync Mode(%%) ==
1490	1490
1491	1491	(% _mstvisible="1" %)
1492	1492	(((
1493	1493	(% _msthash="506263" _msttexthash="11748321" _mstvisible="2" %)
1494		-Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server必须支持v1.0.3协议才能回复这个命令。
	1478	+Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
1495	1495	)))
1496	1496
1497	1497	(% _mstvisible="1" %)
1498	1498	(((
1499	1499	(% _msthash="506264" _msttexthash="6530264" _mstvisible="2" %)
1500		-SYNCMOD 默认设置为 1。如果用户想设置与 LoRaWAN 服务器不同的时间，用户需要将其设置为 0。
	1484	+SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
1501	1501	)))
1502	1502
1503	1503	(% _mstvisible="1" %)
1504	1504	(((
1505	1505	(% _mstvisible="2" %)
1506		-(% _msthash="506058" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
	1490	+(% style="color:#4f81bd" %)**AT Command:**
1507	1507	)))
1508	1508
1509	1509	(% _mstvisible="1" %)
...	...	@@ -1511,23 +1511,23 @@
1511	1511
1512	1512
1513	1513	(% _mstvisible="1" %)
1514		-(% _msthash="315255" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1498	+(% style="color:#4f81bd" %)**Downlink Command:**
1515	1515
1516	1516	(% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1517		-0x28 01 ~/~/ 同 AT+SYNCMOD=1
	1501	+0x28 01 ~/~/ Same As AT+SYNCMOD=1
1518	1518
1519	1519	(% _msthash="315378" _msttexthash="479076" _mstvisible="1" %)
1520		-0x28 00 ~/~/ 同 AT+SYNCMOD=0
	1504	+0x28 00 ~/~/ Same As AT+SYNCMOD=0
1521	1521
1522	1522
1523	1523	(% _mstvisible="1" %)
1524		-== (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 设置时间同步间隔(%%) ==
	1508	+== (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 Set Time Sync Interval(%%) ==
1525	1525
1526	1526	(% _msthash="315379" _msttexthash="3065777" _mstvisible="1" %)
1527		-功能：定义系统时间同步间隔。SYNCTDC 默认值：10 天。
	1511	+Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1528	1528
1529	1529	(% _mstvisible="1" %)
1530		-(% _msthash="315256" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
	1514	+(% style="color:#4f81bd" %)**AT Command:**
1531	1531
1532	1532	(% _mstvisible="1" %)
1533	1533	[[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
...	...	@@ -1534,20 +1534,20 @@
1534	1534
1535	1535
1536	1536	(% _mstvisible="1" %)
1537		-(% _msthash="315257" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1521	+(% style="color:#4f81bd" %)**Downlink Command:**
1538	1538
1539	1539	(% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1540		-0x29 0A ~/~/ 同 AT+SYNCTDC=0x0A
	1524	+0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
1541	1541
1542	1542
1543	1543	(% _mstvisible="1" %)
1544		-== (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 基于页面打印数据条目。(%%) ==
	1528	+== (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 Print data entries base on page.(%%) ==
1545	1545
1546	1546	(% _msthash="315383" _msttexthash="3233334" _mstvisible="1" %)
1547		-功能：打印从起始页到终止页的扇区数据（最大为 416 页）。
	1531	+Feature: Print the sector data from start page to stop page (max is 416 pages).
1548	1548
1549	1549	(% _mstvisible="1" %)
1550		-(% _msthash="315258" _msttexthash="264953" style="color:#4f81bd" %)**AT指令：AT+PDTA**
	1534	+(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
1551	1551
1552	1552	(% _mstvisible="1" %)
1553	1553	[[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
...	...	@@ -1554,20 +1554,20 @@
1554	1554
1555	1555
1556	1556	(% _mstvisible="1" %)
1557		-(% _msthash="315259" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1541	+(% style="color:#4f81bd" %)**Downlink Command:**
1558	1558
1559	1559	(% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1560		-功能没有下行链路命令
	1544	+No downlink commands for feature
1561	1561
1562	1562
1563	1563	(% _mstvisible="1" %)
1564		-== (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 打印最后几个数据条目。(%%) ==
	1548	+== (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 Print last few data entries.(%%) ==
1565	1565
1566	1566	(% _msthash="315387" _msttexthash="1101009" _mstvisible="1" %)
1567		-功能：打印最后几个数据条目
	1551	+Feature: Print the last few data entries
1568	1568
1569	1569	(% _mstvisible="1" %)
1570		-(% _msthash="315260" _msttexthash="288522" style="color:#4f81bd" %)**AT指令：AT+PLDTA**
	1554	+(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1571	1571
1572	1572	(% _mstvisible="1" %)
1573	1573	[[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
...	...	@@ -1574,20 +1574,20 @@
1574	1574
1575	1575
1576	1576	(% _mstvisible="1" %)
1577		-(% _msthash="315261" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
	1561	+(% style="color:#4f81bd" %)**Downlink Command:**
1578	1578
1579	1579	(% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1580		-功能没有下行链路命令
	1564	+No downlink commands for feature
1581	1581
1582	1582
1583	1583	(% _mstvisible="1" %)
1584		-== (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 清除闪存记录(%%) ==
	1568	+== (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 Clear Flash Record(%%) ==
1585	1585
1586	1586	(% _msthash="315391" _msttexthash="1609075" _mstvisible="1" %)
1587		-功能：清除闪存数据记录功能。
	1571	+Feature: Clear flash storage for data log feature.
1588	1588
1589	1589	(% _mstvisible="1" %)
1590		-(% _msthash="315262" _msttexthash="311415" style="color:#4f81bd" %)**AT指令：AT+CLRDTA**
	1574	+(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1591	1591
1592	1592	(% _mstvisible="1" %)
1593	1593	[[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
...	...	@@ -1594,47 +1594,47 @@
1594	1594
1595	1595
1596	1596	(% _mstvisible="1" %)
1597		-(% _msthash="315263" _msttexthash="388193" style="color:#4f81bd" %)**下行命令：0xA3**
	1581	+(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1598	1598
1599	1599	(% _mstvisible="1" %)
1600		-* 示例：0xA301 ~/~/同 AT+CLRDTA
	1584	+* Example: 0xA301 ~/~/Same as AT+CLRDTA
1601	1601
1602	1602	(% _mstvisible="1" %)
1603		-== (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 自动发送 None-ACK 消息(%%) ==
	1587	+== (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1604	1604
1605	1605	(% _msthash="315394" _msttexthash="51837149" _mstvisible="1" %)
1606		-特点：LHT65N每次上行都会等待ACK，如果LHT65N没有收到IoT服务器的ACK，则认为消息没有到达服务器并存储。LHT65N 定期发送消息正常。一旦 LHT65N 从服务器收到 ACK，它会认为网络正常并开始发送未到达消息。
	1590	+Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
1607	1607
1608	1608
1609	1609	(% _mstvisible="1" %)
1610		-(% _msthash="315264" _msttexthash="334256" style="color:#4f81bd" %)**AT 命令：AT+PNACKMD**
	1594	+(% style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1611	1611
1612	1612	(% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1613		-默认出厂设置为 0
	1597	+The default factory setting is 0
1614	1614
1615	1615	(% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1616		-(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**命令示例**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**功能**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**回复**
1617		-(% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)轮询无 ACK 消息|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)好的
	1600	+(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**Command Example**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**Function**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**Response**
	1601	+(% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1618	1618
1619	1619	(% _mstvisible="1" %)
1620		-(% _msthash="315265" _msttexthash="383981" style="color:#4f81bd" %)**下行命令：0x34**
	1604	+(% style="color:#4f81bd" %)**Downlink Command: 0x34**
1621	1621
1622	1622	(% _mstvisible="1" %)
1623		-* 示例：0x3401 ~/~/同 AT+PNACKMD=1
	1607	+* Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1624	1624
1625	1625	(% _mstvisible="1" %)
1626		-= (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. 电池及更换方法(%%) =
	1610	+= (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1627	1627
1628	1628	(% _mstvisible="1" %)
1629		-== (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 电池类型(%%) ==
	1613	+== (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 Battery Type(%%) ==
1630	1630
1631	1631	(% _msthash="315398" _msttexthash="33754799" _mstvisible="1" %)
1632		-LHT65N 配备 2400mAH Li-MnO2 (CR17505) 电池。该电池是一种不可充电电池，具有低放电率，可使用长达 8~~10 年。这种类型的电池通常用于物联网设备中以进行长期运行，例如水表。
	1616	+LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1633	1633
1634	1634	(% _mstvisible="1" %)
1635	1635	(((
1636	1636	(% _mstvisible="2" %)
1637		-放电曲线不是线性的，所以不能简单地用百分比来表示电池电量。下面是电池性能。
	1621	+The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1638	1638	[[image:image-20220515075034-1.png||_mstalt="428961" _mstvisible="4" height="208" width="644"]]
1639	1639	)))
1640	1640
...	...	@@ -1641,29 +1641,28 @@
1641	1641	(% _mstvisible="1" %)
1642	1642	(((
1643	1643	(% _mstvisible="2" %)
1644		-LHT65N 的最低工作电压约为 2.5v。当电池低于 2.6v 时，是时候更换电池了。
	1628	+The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1645	1645
1646	1646	)))
1647	1647
1648	1648	(% _mstvisible="1" %)
1649		-== (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 更换电池(%%) ==
	1633	+== (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 Replace Battery(%%) ==
1650	1650
1651	1651	(% _msthash="315399" _msttexthash="11289278" _mstvisible="1" %)
1652		-LHT65N背面有两颗螺丝，拧下，更换里面的电池就OK了。电池为通用CR17450电池。任何品牌都应该没问题。
	1636	+LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
1653	1653
1654	1654	(% _mstvisible="1" %)
1655	1655	[[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1656	1656
1657	1657	(% _mstvisible="1" %)
1658		-== (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 电池寿命分析(%%) ==
	1642	+== (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1659	1659
1660	1660	(% _mstvisible="1" %)
1661	1661	(((
1662	1662	(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1663	1663	(((
1664		-(% _msthash="736723" _msttexthash="35479028" %)
1665		-Dragino 电池供电产品均以低功耗模式运行。用户可以从此链接查看指南以计算估计的电池寿命：
1666		-[[https :~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
	1648	+Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
	1649	+[[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1667	1667	)))
1668	1668
1669	1669	(((
...	...	@@ -1671,367 +1671,220 @@
1671	1671	)))
1672	1672
1673	1673	(((
1674		-(% _msthash="736724" _msttexthash="12045098" %)
1675		-LHT65N 不同频率的完整详细测试报告可在以下网址找到：[[https :~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
	1657	+A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1676	1676	)))
1677	1677
1678	1678
1679	1679	(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1680		-= (% _msthash="183170" _msttexthash="37921" _mstvisible="3" %)6. 常见问题(%%) =
	1662	+= (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. FAQ(%%) =
1681	1681
1682	1682	(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1683		-== (% _msthash="491075" _msttexthash="437463" %)6.1 如何使用 AT 命令？(%%) ==
	1665	+== 6.1 How to use AT Command? ==
1684	1684
1685	1685	(((
1686		-(% _msthash="736725" _msttexthash="9345674" %)
1687		-LHT65N 支持 AT 命令集。用户可以使用 USB 转 TTL 适配器和程序线连接到 LHT65 使用 AT 命令，如下所示。
	1668	+LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1688	1688	)))
1689	1689
1690		-[[image:image-20220530085651-1.png||_mstalt="429949"]]
	1671	+[[image:image-20220530085651-1.png]]
1691	1691
1692	1692
1693		-(% _msthash="506061" _msttexthash="170755" %)**联系：**
	1674	+**Connection:**
1694	1694
1695		-(% _msthash="506062" _msttexthash="1187732" %)
1696		-✓ ** USB 转 TTL GND <~-~->GND**
	1676	+✓** USB to TTL GND <~-~->GND**
1697	1697
1698		-(% _msthash="506063" _msttexthash="1158313" %)**✓ USB 转 TTL RXD <~-~-> D+**
	1678	+**✓ USB to TTL RXD <~-~-> D+**
1699	1699
1700		-(% _msthash="506064" _msttexthash="1175629" %)**✓ USB 转 TTL TXD <~-~-> A11**
	1680	+**✓ USB to TTL TXD <~-~-> A11**
1701	1701
1702		-(% _msthash="506065" _msttexthash="1164696" %)**✓ USB 转 TTL 3.3V <~-~-> D-**
	1682	+**✓ USB to TTL 3.3V <~-~-> D-**
1703	1703
1704	1704
1705	1705	(((
1706		-(% _msthash="736726" _msttexthash="67213055" %)
1707		-在 PC 端，用户需要将串口工具（如**putty**、SecureCRT）波特率设置为**9600**才能访问 LHT65N 的串口控制台。AT 指令默认关闭，需要输入密码（默认：**123456**）才能激活。输入 AT 命令的超时时间为 5 分钟，5 分钟后，用户需要再次输入密码。用户可以使用 AT+DSAT 命令在超时前禁用 AT 命令。
	1686	+In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1708	1708	)))
1709	1709
1710	1710	(((
1711		-(% _msthash="736727" _msttexthash="1907009" %)
1712		-输入密码和ATZ激活LHT65N，如下图：
	1690	+Input password and ATZ to activate LHT65N,As shown below:
1713	1713	)))
1714	1714
1715		-[[image:image-20220530095701-4.png||_mstalt="430014"]]
	1693	+[[image:image-20220530095701-4.png]]
1716	1716
1717	1717
1718		-(% _msthash="506066" _msttexthash="544869" %)
1719		-AT 命令列表如下：
	1696	+AT Command List is as below:
1720	1720
1721		-(% _msthash="506067" _msttexthash="361920" %)
1722		-AT+<CMD>? : 关于 <CMD> 的帮助
	1698	+AT+<CMD>? :  Help on <CMD>
1723	1723
1724		-(% _msthash="506068" _msttexthash="243061" %)
1725		-AT+<CMD> : 运行 <CMD>
	1700	+AT+<CMD> :  Run <CMD>
1726	1726
1727		-(% _msthash="506069" _msttexthash="704197" %)
1728		-AT+<CMD>=<value> : 设置值
	1702	+AT+<CMD>=<value> :  Set the value
1729	1729
1730		-(% _msthash="506070" _msttexthash="455676" %)
1731		-AT+<CMD>=? : 获取值
	1704	+AT+<CMD>=? :  Get the value
1732	1732
1733		-(% _msthash="506071" _msttexthash="670553" %)
1734		-AT+DEBUG：设置更多信息输出
	1706	+AT+DEBUG:  Set more info output
1735	1735
1736		-(% _msthash="506072" _msttexthash="485888" %)
1737		-ATZ：触发 MCU 复位
	1708	+ATZ:  Trig a reset of the MCU
1738	1738
1739		-(% _msthash="506073" _msttexthash="2068872" %)
1740		-AT+FDR：将参数重置为出厂默认值，按键保留
	1710	+AT+FDR:  Reset Parameters to Factory Default, Keys Reserve
1741	1741
1742		-(% _msthash="506074" _msttexthash="689169" %)
1743		-AT+DEUI：获取或设置设备 EUI
	1712	+AT+DEUI:  Get or Set the Device EUI
1744	1744
1745		-(% _msthash="506075" _msttexthash="960414" %)
1746		-AT+DADDR：获取或设置设备地址
	1714	+AT+DADDR:  Get or Set the Device Address
1747	1747
1748		-(% _msthash="506076" _msttexthash="1079897" %)
1749		-AT+APPKEY：获取或设置应用密钥
	1716	+AT+APPKEY:  Get or Set the Application Key
1750	1750
1751		-(% _msthash="506077" _msttexthash="1326143" %)
1752		-AT+NWKSKEY：获取或设置网络会话密钥
	1718	+AT+NWKSKEY:  Get or Set the Network Session Key
1753	1753
1754		-(% _msthash="506078" _msttexthash="1573000" %)
1755		-AT+APPSKEY：获取或设置应用会话密钥
	1720	+AT+APPSKEY:  Get or Set the Application Session Key
1756	1756
1757		-(% _msthash="506079" _msttexthash="1041729" %)
1758		-AT+APPEUI：获取或设置应用程序 EUI
	1722	+AT+APPEUI:  Get or Set the Application EUI
1759	1759
1760		-(% _msthash="506080" _msttexthash="2104206" %)
1761		-AT+ADR：获取或设置自适应数据速率设置。（0：关闭，1：开启）
	1724	+AT+ADR:  Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1762	1762
1763		-(% _msthash="506081" _msttexthash="3369288" %)
1764		-AT+TXP：获取或设置发射功率（0-5, MAX:0, MIN:5, 根据 LoRaWAN Spec）
	1726	+AT+TXP:  Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1765	1765
1766		-(% _msthash="506082" _msttexthash="1894529" %)
1767		-AT+DR：获取或设置数据速率。（0-7对应DR_X）
	1728	+AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
1768	1768
1769		-(% _msthash="506083" _msttexthash="3864172" %)
1770		-AT+DCS：获取或设置 ETSI 占空比设置 - 0=禁用，1=启用 - 仅用于测试
	1730	+AT+DCS:  Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1771	1771
1772		-(% _msthash="506084" _msttexthash="1712204" %)
1773		-AT+PNM：获取或设置公网模式。（0：关闭，1：开启）
	1732	+AT+PNM:  Get or Set the public network mode. (0: off, 1: on)
1774	1774
1775		-(% _msthash="506085" _msttexthash="1281202" %)
1776		-AT+RX2FQ：获取或设置 Rx2 窗口频率
	1734	+AT+RX2FQ:  Get or Set the Rx2 window frequency
1777	1777
1778		-(% _msthash="506086" _msttexthash="2796781" %)
1779		-AT+RX2DR：获取或设置 Rx2 窗口数据速率（0-7 对应 DR_X）
	1736	+AT+RX2DR:  Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1780	1780
1781		-(% _msthash="506087" _msttexthash="3285165" %)
1782		-AT+RX1DL：获取或设置 Tx 结束与 Rx Window 1 之间的延迟，单位为 ms
	1738	+AT+RX1DL:  Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1783	1783
1784		-(% _msthash="506088" _msttexthash="3286179" %)
1785		-AT+RX2DL：获取或设置 Tx 结束与 Rx Window 2 之间的延迟，单位为 ms
	1740	+AT+RX2DL:  Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1786	1786
1787		-(% _msthash="506089" _msttexthash="4703803" %)
1788		-AT+JN1DL：获取或设置 Tx 结束和加入 Rx 窗口 1 之间的加入接受延迟，单位为 ms
	1742	+AT+JN1DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1789	1789
1790		-(% _msthash="506090" _msttexthash="4704999" %)
1791		-AT+JN2DL：获取或设置 Tx 结束与加入 Rx 窗口 2 之间的加入接受延迟，单位为 ms
	1744	+AT+JN2DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1792	1792
1793		-(% _msthash="506091" _msttexthash="1528683" %)
1794		-AT+NJM：获取或设置网络加入模式。（0：ABP，1：OTAA）
	1746	+AT+NJM:  Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1795	1795
1796		-(% _msthash="506092" _msttexthash="757185" %)
1797		-AT+NWKID：获取或设置网络 ID
	1748	+AT+NWKID:  Get or Set the Network ID
1798	1798
1799		-(% _msthash="506093" _msttexthash="1156597" %)
1800		-AT+FCU：获取或设置上行帧计数器
	1750	+AT+FCU:  Get or Set the Frame Counter Uplink
1801	1801
1802		-(% _msthash="506094" _msttexthash="1273987" %)
1803		-AT+FCD：获取或设置帧计数器下行
	1752	+AT+FCD:  Get or Set the Frame Counter Downlink
1804	1804
1805		-(% _msthash="506095" _msttexthash="859222" %)
1806		-AT+CLASS：获取或设置设备类
	1754	+AT+CLASS:  Get or Set the Device Class
1807	1807
1808		-(% _msthash="506096" _msttexthash="384852" %)
1809		-AT+JOIN：加入网络
	1756	+AT+JOIN:  Join network
1810	1810
1811		-(% _msthash="506097" _msttexthash="548626" %)
1812		-AT+NJS：获取加入状态
	1758	+AT+NJS:  Get the join status
1813	1813
1814		-(% _msthash="506098" _msttexthash="2546206" %)
1815		-AT+SENDB：随应用端口发送十六进制数据
	1760	+AT+SENDB:  Send hexadecimal data along with the application port
1816	1816
1817		-(% _msthash="506099" _msttexthash="1932307" %)
1818		-AT+SEND：随应用端口发送文本数据
	1762	+AT+SEND:  Send text data along with the application port
1819	1819
1820		-(% _msthash="506100" _msttexthash="3560557" %)
1821		-AT+RECVB：以二进制格式打印最后接收到的数据（带十六进制值）
	1764	+AT+RECVB:  Print last received data in binary format (with hexadecimal values)
1822	1822
1823		-(% _msthash="506101" _msttexthash="1429701" %)
1824		-AT+RECV：以原始格式打印最后接收到的数据
	1766	+AT+RECV:  Print last received data in raw format
1825	1825
1826		-(% _msthash="506102" _msttexthash="1735981" %)
1827		-AT+VER：获取当前镜像版本和频段
	1768	+AT+VER:  Get current image version and Frequency Band
1828	1828
1829		-(% _msthash="506103" _msttexthash="1189474" %)
1830		-AT+CFM：获取或设置确认模式（0-1）
	1770	+AT+CFM:  Get or Set the confirmation mode (0-1)
1831	1831
1832		-(% _msthash="506104" _msttexthash="1718210" %)
1833		-AT+CFS：获取最后一次AT+SEND的确认状态（0-1）
	1772	+AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
1834	1834
1835		-(% _msthash="506105" _msttexthash="1339403" %)
1836		-AT+SNR：获取最后收到的数据包的信噪比
	1774	+AT+SNR:  Get the SNR of the last received packet
1837	1837
1838		-(% _msthash="506106" _msttexthash="1452009" %)
1839		-AT+RSSI：获取最后收到的数据包的RSSI
	1776	+AT+RSSI:  Get the RSSI of the last received packet
1840	1840
1841		-(% _msthash="506107" _msttexthash="2768142" %)
1842		-AT+TDC：获取或设置应用数据传输间隔，单位为ms
	1778	+AT+TDC:  Get or set the application data transmission interval in ms
1843	1843
1844		-(% _msthash="506108" _msttexthash="1083914" %)
1845		-AT+PORT：获取或设置应用端口
	1780	+AT+PORT:  Get or set the application port
1846	1846
1847		-(% _msthash="506109" _msttexthash="622440" %)
1848		-AT+DISAT：禁用 AT 指令
	1782	+AT+DISAT:  Disable AT commands
1849	1849
1850		-(% _msthash="506110" _msttexthash="868361" %)
1851		-AT+PWORD：设置密码，最多9位
	1784	+AT+PWORD:  Set password, max 9 digits
1852	1852
1853		-(% _msthash="506111" _msttexthash="2210299" %)
1854		-AT+CHS：获取或设置单通道模式的频率（单位：Hz）
	1786	+AT+CHS:  Get or Set Frequency (Unit: Hz) for Single Channel Mode
1855	1855
1856		-(% _msthash="506112" _msttexthash="2113462" %)
1857		-AT+CHE：获取或设置八通道模式，仅适用于US915、AU915、CN470
	1788	+AT+CHE:  Get or Set eight channels mode,Only for US915,AU915,CN470
1858	1858
1859		-(% _msthash="506113" _msttexthash="2087423" %)
1860		-AT+PDTA：打印起始页到终止页的扇区数据
	1790	+AT+PDTA:  Print the sector data from start page to stop page
1861	1861
1862		-(% _msthash="506114" _msttexthash="1063127" %)
1863		-AT+PLDTA：打印最后几组数据
	1792	+AT+PLDTA:  Print the last few sets of data
1864	1864
1865		-(% _msthash="506115" _msttexthash="1999426" %)
1866		-AT+CLRDTA：清除存储，记录位置回到第一个
	1794	+AT+CLRDTA:  Clear the storage, record position back to 1st
1867	1867
1868		-(% _msthash="506116" _msttexthash="442130" %)
1869		-AT+SLEEP：设置睡眠模式
	1796	+AT+SLEEP:  Set sleep mode
1870	1870
1871		-(% _msthash="506117" _msttexthash="1080222" %)
1872		-AT+EXT：获取或设置外部传感器型号
	1798	+AT+EXT:  Get or Set external sensor model
1873	1873
1874		-(% _msthash="506118" _msttexthash="1309490" %)
1875		-AT+BAT：获取当前电池电压，单位为mV
	1800	+AT+BAT:  Get the current battery voltage in mV
1876	1876
1877		-(% _msthash="506119" _msttexthash="813891" %)
1878		-AT+CFG：打印所有配置
	1802	+AT+CFG:  Print all configurations
1879	1879
1880		-(% _msthash="506120" _msttexthash="551707" %)
1881		-AT+WMOD：获取或设置工作模式
	1804	+AT+WMOD:  Get or Set Work Mode
1882	1882
1883		-(% _msthash="506121" _msttexthash="2631499" %)
1884		-AT+ARTEMP：获取或设置内部温度传感器报警范围
	1806	+AT+ARTEMP:  Get or set the internal Temperature sensor alarm range
1885	1885
1886		-(% _msthash="506122" _msttexthash="3907150" %)
1887		-AT+CITEMP：获取或设置内部温度传感器采集间隔，单位为 min
	1808	+AT+CITEMP:  Get or set the internal Temperature sensor collection interval in min
1888	1888
1889		-(% _msthash="506123" _msttexthash="854620" %)
1890		-AT+SETCNT：设置当前计数
	1810	+AT+SETCNT:  Set the count at present
1891	1891
1892		-(% _msthash="506124" _msttexthash="2554877" %)
1893		-AT+RJTDC：获取或设置 ReJoin 数据传输间隔，单位为 min
	1812	+AT+RJTDC:  Get or set the ReJoin data transmission interval in min
1894	1894
1895		-(% _msthash="506125" _msttexthash="771849" %)
1896		-AT+RPL：获取或设置响应级别
	1814	+AT+RPL:  Get or set response level
1897	1897
1898		-(% _msthash="506126" _msttexthash="1484314" %)
1899		-AT+TIMESTAMP：以秒为单位获取或设置 UNIX 时间戳
	1816	+AT+TIMESTAMP:  Get or Set UNIX timestamp in second
1900	1900
1901		-(% _msthash="506127" _msttexthash="741728" %)
1902		-AT+LEAPSEC：获取或设置闰秒
	1818	+AT+LEAPSEC:  Get or Set Leap Second
1903	1903
1904		-(% _msthash="506128" _msttexthash="1694017" %)
1905		-AT+SYNCMOD：获取或设置时间同步方式
	1820	+AT+SYNCMOD:  Get or Set time synchronization method
1906	1906
1907		-(% _msthash="506129" _msttexthash="2235948" %)
1908		-AT+SYNCTDC：获取或设置时间同步间隔，以天为单位
	1822	+AT+SYNCTDC:  Get or set time synchronization interval in day
1909	1909
1910		-(% _msthash="506130" _msttexthash="425542" %)
1911		-AT+PID：获取或设置PID
	1824	+AT+PID:  Get or set the PID
1912	1912
1913	1913
1914		-== (% _msthash="1616654" _msttexthash="1555359" %)6.2 AT 命令和下行命令在哪里使用(%%) ==
	1827	+== 6.2 Where to use AT commands and Downlink commands ==
1915	1915
1916		-(% _msthash="506131" _msttexthash="14585714" %)
1917		-AT指令：
	1829	+AT commands：
1918	1918
1919		-[[image:image-20220615092034-1.png||_mstalt="428870"]]
	1831	+[[image:image-20220615092034-1.png]]
1920	1920
1921		-(% _msthash="506132" _msttexthash="337922" %)
1922		-下行命令：
	1833	+Downlink commands:
1923	1923
1924		-(% _msthash="506133" _msttexthash="33046" %)
1925		-电讯网：
	1835	+TTN:
1926	1926
1927		-[[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
	1837	+[[image:image-20220615092124-2.png||height="843" width="893"]]
1928	1928
1929		-(% _msthash="506134" _msttexthash="11113791" %)
1930		-氦：
	1839	+Helium：
1931	1931
1932		-[[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
	1841	+[[image:image-20220615092551-3.png||height="556" width="1097"]]
1933	1933
1934		-(% _msthash="506135" _msttexthash="4159844" %)
1935		-Chirpstack：接入网络后才会显示下行窗口
	1843	+Chirpstack:The downlink window will not be displayed until the network is accessed
1936	1936
1937		-[[image:image-20220615094850-6.png||_mstalt="433082"]]
	1845	+[[image:image-20220615094850-6.png]]
1938	1938
1939		-[[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
	1847	+[[image:image-20220615094904-7.png||height="329" width="1067"]]
1940	1940
1941		-(% _msthash="506136" _msttexthash="39286" %)
1942		-AWS：
	1849	+Aws:
1943	1943
1944		-[[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
	1851	+[[image:image-20220615092939-4.png||height="532" width="1062"]]
1945	1945
1946		-== (% _msthash="1220570" _msttexthash="33199257" %)6.3 如何更改上行间隔？(%%) ==
	1853	+== 6.3 How to change the uplink interval？ ==
1947	1947
1948		-[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/||_msthash="506137" _msttexthash="5712018"]]
1949		-
1950		-(% _msthash="536757" _msttexthash="1874951" %)
1951		-== 6.4 如何使用TTL-USB 连接PC 输入AT 指令？ ==
1952		-
1953		-[[image:image-20220615153355-1.png]]
1954		-
1955		-(% _msthash="506138" _msttexthash="243997" %)
1956		-1 < - -> 接地 < - -> 黑色
1957		-
1958		-(% _msthash="506139" _msttexthash="257166" %)
1959		-5 < - -> RXD < - -> 白色
1960		-
1961		-(% _msthash="506140" _msttexthash="253799" %)
1962		-9 < - -> TXD < - -> 绿色
1963		-
1964		-[[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1965		-
1966		-(((
1967		-(% _msthash="736728" _msttexthash="67213055" %)
1968		-在 PC 端，用户需要将串口工具（如**putty**、SecureCRT）波特率设置为**9600**才能访问 LHT65N 的串口控制台。AT 指令默认关闭，需要输入密码（默认：**123456**）才能激活。输入 AT 命令的超时时间为 5 分钟，5 分钟后，用户需要再次输入密码。用户可以使用 AT+DSAT 命令在超时前禁用 AT 命令。
	1855	+[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/]]
1969	1969	)))
1970	1970
1971		-(((
1972		-(% _msthash="736729" _msttexthash="1907009" %)
1973		-输入密码和ATZ激活LHT65N，如下图：
1974		-
1975		-[[image:image-20220615154519-3.png]]
1976		-
1977		-
1978		-)))
1979		-
1980		-(% _msthash="536758" _msttexthash="1832428" %)
1981		-== 6.5 如何使用TTL-USB 连接PC 升级固件？ ==
1982		-
1983		-[[image:image-20220615153355-1.png]]
1984		-
1985		-(% _msthash="506141" _msttexthash="231309" %)
1986		-4 < - -> 3.3V < - -> 蓝色
1987		-
1988		-(% _msthash="506142" _msttexthash="257166" %)
1989		-5 < - -> RXD < - -> 白色
1990		-
1991		-(% _msthash="506143" _msttexthash="253799" %)
1992		-9 < - -> TXD < - -> 绿色
1993		-
1994		-连接好后使用，地线（1 < - -> GND < - -> Black）1s后拔出，重启设备。
1995		-
1996		-
1997		-(% _mstmutation="1" %)**Step1**(%%) : 首先安装 TremoProgrammer。
1998		-
1999		-[[image:image-20220615170542-5.png]]
2000		-
2001		-
2002		-(% _msthash="506146" _msttexthash="52173160" %)
2003		-(% _istranslated="1" %)**Step2**(%%)：下载LHT65N镜像文件。
2004		-
2005		-
2006		-(% _msthash="506147" _msttexthash="188083584" %)
2007		-(% _istranslated="1" %)**Step3：**(%%)选择设备的串口和波特率以及要升级的固件。
2008		-
2009		-[[image:image-20220615171334-6.png]]
2010		-
2011		-
2012		-(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)点击开始
2013		-
2014		-
2015		-== 6.6 HT65N一次可以存储多少条数据？ ==
2016		-
2017		-3328
2018		-
2019		-
2020		-)))
2021		-
2022	2022	(% _mstvisible="1" %)
2023		-= (% _msthash="183170" _msttexthash="13740740" _mstvisible="3" %)7. (%%)订单信息 =
	1859	+= (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)7. Order Info(%%) =
2024	2024
2025	2025	(% _mstvisible="1" %)
2026	2026	(((
2027	2027	(% _msthash="506267" _msttexthash="432432" _mstvisible="2" %)
2028		-零件编号：(% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
	1864	+Part Number: (% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
2029	2029	)))
2030	2030
2031	2031	(% _mstvisible="1" %)
2032	2032	(((
2033	2033	(% _msthash="506268" _msttexthash="686946" _mstvisible="2" %)
2034		-(% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%) : 默认频段
	1870	+(% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%): The default frequency band
2035	2035	)))
2036	2036
2037	2037	(% _mstvisible="1" %)
...	...	@@ -2038,48 +2038,48 @@
2038	2038	* (% _mstvisible="3" %)
2039	2039	(((
2040	2040	(% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
2041		-(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%) : LoRaWAN AS923 频段
	1877	+(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
2042	2042	)))
2043	2043	* (% _mstvisible="3" %)
2044	2044	(((
2045	2045	(% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
2046		-(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%) : LoRaWAN AU915 频段
	1882	+(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
2047	2047	)))
2048	2048	* (% _mstvisible="3" %)
2049	2049	(((
2050	2050	(% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
2051		-(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%) : LoRaWAN EU433 频段
	1887	+(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
2052	2052	)))
2053	2053	* (% _mstvisible="3" %)
2054	2054	(((
2055	2055	(% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
2056		-(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%) : LoRaWAN EU868 频段
	1892	+(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
2057	2057	)))
2058	2058	* (% _mstvisible="3" %)
2059	2059	(((
2060	2060	(% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
2061		-(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%) : LoRaWAN KR920 带
	1897	+(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
2062	2062	)))
2063	2063	* (% _mstvisible="3" %)
2064	2064	(((
2065	2065	(% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
2066		-(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%) : LoRaWAN US915 频段
	1902	+(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
2067	2067	)))
2068	2068	* (% _mstvisible="3" %)
2069	2069	(((
2070	2070	(% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
2071		-(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%) : LoRaWAN IN865 频段
	1907	+(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
2072	2072	)))
2073	2073	* (% _mstvisible="3" %)
2074	2074	(((
2075	2075	(% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
2076		-(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%) : LoRaWAN CN470 频段
	1912	+(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
2077	2077	)))
2078	2078
2079	2079	(% _mstvisible="1" %)
2080	2080	(((
2081	2081	(% _msthash="506269" _msttexthash="443495" _mstvisible="2" %)
2082		-(% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%) : 传感器配件
	1918	+(% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
2083	2083	)))
2084	2084
2085	2085	(% _mstvisible="1" %)
...	...	@@ -2086,7 +2086,7 @@
2086	2086	* (% _mstvisible="3" %)
2087	2087	(((
2088	2088	(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2089		-(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%)：外部温度探头
	1925	+(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
2090	2090
2091	2091
2092	2092	(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
...	...	@@ -2094,7 +2094,7 @@
2094	2094	)))
2095	2095
2096	2096	(% _mstvisible="1" %)
2097		-= (% _msthash="233363" _msttexthash="13823550" _mstvisible="3" %)8. (%%)包装信息 =
	1933	+= (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)8. Packing Info(%%) =
2098	2098
2099	2099	(% _mstvisible="1" %)
2100	2100	(((
...	...	@@ -2102,7 +2102,7 @@
2102	2102
2103	2103
2104	2104	(% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
2105		-(% _mstvisible="3" %)**套餐包括**(%%)：
	1941	+(% _mstvisible="3" %)**Package Includes**(%%):
2106	2106	)))
2107	2107
2108	2108	(% _mstvisible="1" %)
...	...	@@ -2109,23 +2109,23 @@
2109	2109	* (% _mstvisible="3" %)
2110	2110	(((
2111	2111	(% _msthash="903336" _msttexthash="1033149" _mstvisible="4" %)
2112		-LHT65N 温湿度传感器 x 1
	1948	+LHT65N Temperature & Humidity Sensor x 1
2113	2113	)))
2114	2114	* (% _mstvisible="3" %)
2115	2115	(((
2116	2116	(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
2117		-程序线 x 1
	1953	+Program cable x 1
2118	2118	)))
2119	2119	* (% _mstvisible="3" %)
2120	2120	(((
2121	2121	(% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2122		-可选的外部传感器
	1958	+Optional external sensor
2123	2123	)))
2124	2124
2125	2125	(% _mstvisible="1" %)
2126	2126	(((
2127	2127	(% _msthash="506271" _msttexthash="403858" _mstvisible="2" %)
2128		-(% _mstvisible="3" %)**尺寸和重量**(%%)：
	1964	+(% _mstvisible="3" %)**Dimension and weight**(%%):
2129	2129	)))
2130	2130
2131	2131	(% _mstvisible="1" %)
...	...	@@ -2132,22 +2132,22 @@
2132	2132	* (% _mstvisible="3" %)
2133	2133	(((
2134	2134	(% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
2135		-设备尺寸：13.5 x 7 x 3 厘米
	1971	+Device Size:  13.5 x 7 x 3 cm
2136	2136	)))
2137	2137	* (% _mstvisible="3" %)
2138	2138	(((
2139	2139	(% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
2140		-设备重量：105g
	1976	+Device Weight: 105g
2141	2141	)))
2142	2142	* (% _mstvisible="3" %)
2143	2143	(((
2144	2144	(% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
2145		-包装尺寸/个：14.5 x 8 x 5 cm
	1981	+Package Size / pcs : 14.5 x 8 x 5 cm
2146	2146	)))
2147	2147	* (% _mstvisible="3" %)
2148	2148	(((
2149	2149	(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2150		-重量/个：170g
	1986	+Weight / pcs : 170g
2151	2151
2152	2152
2153	2153	(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
...	...	@@ -2154,26 +2154,26 @@
2154	2154
2155	2155	)))
2156	2156
2157		-= (% _msthash="184782" _msttexthash="16007771" %)9. 参考资料(%%) =
	1993	+= 9. Reference =
2158	2158
2159		-* [[数据表、照片、解码器、固件>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor||_msthash="504975" _msttexthash="51420512"]]
	1995	+* [[Datasheet, Photos, Decoder, Firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor]]
2160	2160
2161		-= (% _msthash="216320" _msttexthash="10002096" %)10. (%%) FCC 警告 =
	1997	+= 10. FCC Warning =
2162	2162
2163	2163	(% _mstvisible="1" %)
2164	2164	(((
2165	2165	(% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
2166		-本设备符合 FCC 规则第 15 部分的规定。操作需满足以下两个条件：
	2002	+This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
2167	2167	)))
2168	2168
2169	2169	(% _mstvisible="1" %)
2170	2170	(((
2171	2171	(% _msthash="506273" _msttexthash="44097638" _mstvisible="2" %)
2172		-(1) 本设备不会造成有害干扰；
	2008	+(1) This device may not cause harmful interference；
2173	2173	)))
2174	2174
2175	2175	(% _mstvisible="1" %)
2176	2176	(((
2177	2177	(% _msthash="506274" _msttexthash="7559773" _mstvisible="2" %)
2178		-(2) 本设备必须接受接收到的任何干扰，包括可能导致意外操作的干扰。
	2014	+(2) this device must accept any interference received, including interference that may cause undesired operation.
2179	2179	)))

image-20220615171334-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bei

Size

...	...	@@ -1,1 +1,0 @@
1		-16.2 KB

Content