Skip to Content
Last modified by Mengting Qiu on 2025/07/03 14:48
From version 146.16
edited by Xiaoling
on 2022/06/17 14:05
Change comment: There is no comment for this version
To version 143.1
edited by Bei Jinggeng
on 2022/06/15 17:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -6,7 +6,7 @@
6 6  
7 7  
8 8  (% _mstvisible="1" %)
9 -(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**目录：**
9 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
10 10  
11 11  {{toc/}}
12 12  
... ... @@ -14,45 +14,45 @@
14 14  
15 15  
16 16  (% _mstvisible="1" %)
17 -= (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)一、简介(%%) =
17 += (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)1. Introduction(%%) =
18 18  
19 19  (% _mstvisible="1" %)
20 -== (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 什么是 LHT65N 温湿度传感器(%%) ==
20 +== (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 What is LHT65N Temperature & Humidity Sensor(%%) ==
21 21  
22 22  (% _mstvisible="1" %)
23 23  (((
24 24  (% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
25 -Dragino LHT65N 温度和湿度传感器是一款远程 LoRaWAN 传感器。它包括一个 (% _mstvisible="4" style="color:#4f81bd" %)**内置温度和湿度传感器**(%%)，并具有一个外部传感器连接器，用于连接外部(% _mstvisible="4" style="color:#4f81bd" %)**温度传感器**(% _mstvisible="3" %)**。**
25 +The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
26 26  )))
27 27  
28 28  (% _mstvisible="1" %)
29 29  (((
30 30  (% _msthash="506052" _msttexthash="66005810" _mstvisible="2" %)
31 -LHT65N 允许用户发送数据并达到极远的距离。它提供超长距离扩频通信和高抗干扰性，同时最大限度地减少电流消耗。它针对专业的无线传感器网络应用，例如灌溉系统、智能计量、智慧城市、楼宇自动化等。
31 +The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
32 32  )))
33 33  
34 34  (% _mstvisible="1" %)
35 35  (((
36 36  (% _msthash="506053" _msttexthash="4298047" _mstvisible="2" %)
37 -LHT65N 内置 2400mAh 不可充电电池，可使用长达 10 年*。
37 +LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
38 38  )))
39 39  
40 40  (% _mstvisible="1" %)
41 41  (((
42 42  (% _msthash="506054" _msttexthash="6016374" _mstvisible="2" %)
43 -LHT65N完全兼容LoRaWAN v1.0.3 Class A协议，可与标准LoRaWAN网关配合使用。
43 +LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
44 44  )))
45 45  
46 46  (% _mstvisible="1" %)
47 47  (((
48 48  (% _msthash="506055" _msttexthash="17023136" _mstvisible="2" %)
49 -LHT65N 支持(% _mstvisible="4" style="color:#4f81bd" %)**数据记录功能**(%%)。它会在没有网络覆盖的情况下记录数据，用户可以稍后检索传感器值，以确保每次传感器读数都不会丢失。
49 +LHT65N supports (% _mstvisible="4" style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
50 50  )))
51 51  
52 52  (% _mstvisible="1" %)
53 53  (((
54 54  (% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
55 -*实际电池寿命取决于发送数据的频率，请参阅电池分析仪章节。
55 +*The actual battery life depends on how often to send data, please see the battery analyzer chapter.
56 56  
57 57  (% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
58 58  
... ... @@ -59,26 +59,23 @@
59 59  )))
60 60  
61 61  (% _mstvisible="1" %)
62 -== (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 特点(%%) ==
62 +== (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 Features(%%) ==
63 63  
64 64  (% _mstvisible="1" %)
65 -* 壁挂式
66 -* LoRaWAN v1.0.3 A类协议
67 -* 频段：CN470/EU433/KR920/US915/EU868/AS923/AU915
68 -* AT 命令更改参数
69 -* 通过 LoRaWAN Downlink 远程配置参数
70 -* 固件可通过程序端口升级
71 -* 内置 2400mAh 电池，可使用长达 10 年。
72 -* 内置温湿度传感器
73 -* 可选的外部传感器
74 -* 三色LED指示工作状态
75 -* 数据记录功能
65 +* Wall mountable
66 +* LoRaWAN v1.0.3 Class A protocol
67 +* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
68 +* AT Commands to change parameters
69 +* Remote configure parameters via LoRaWAN Downlink
70 +* Firmware upgradeable via program port
71 +* Built-in 2400mAh battery for up to 10 years of use.
72 +* Built-in Temperature & Humidity sensor
73 +* Optional External Sensors
74 +* Tri-color LED to indicate working status
75 +* Datalog feature
76 76  
77 -
78 -
79 -
80 80  (% _mstvisible="1" %)
81 -== (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 规格(%%) ==
78 +== (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
82 82  
83 83  (% _mstvisible="1" %)
84 84  (((
... ... @@ -86,7 +86,7 @@
86 86  
87 87  
88 88  (% _mstvisible="2" %)
89 -(% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**内置温度传感器：**
86 +(% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**Built-in Temperature Sensor:**
90 90  )))
91 91  
92 92  (% _mstvisible="1" %)
... ... @@ -93,22 +93,22 @@
93 93  * (% _mstvisible="3" %)
94 94  (((
95 95  (% _msthash="902993" _msttexthash="294424" _mstvisible="4" %)
96 -分辨率：0.01 °C
93 +Resolution: 0.01 °C
97 97  )))
98 98  * (% _mstvisible="3" %)
99 99  (((
100 100  (% _msthash="902994" _msttexthash="690664" _mstvisible="4" %)
101 -精度公差：典型值 ±0.3 °C
98 +Accuracy Tolerance : Typ ±0.3 °C
102 102  )))
103 103  * (% _mstvisible="3" %)
104 104  (((
105 105  (% _msthash="902995" _msttexthash="504647" _mstvisible="4" %)
106 -长期漂移：< 0.02 °C/年
103 +Long Term Drift: < 0.02 °C/yr
107 107  )))
108 108  * (% _mstvisible="3" %)
109 109  (((
110 110  (% _msthash="902996" _msttexthash="478257" _mstvisible="4" %)
111 -工作范围：-40 ~~ 85 °C
108 +Operating Range: -40 ~~ 85 °C
112 112  )))
113 113  
114 114  (% _mstvisible="1" %)
... ... @@ -117,7 +117,7 @@
117 117  
118 118  
119 119  (% _mstvisible="2" %)
120 -(% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**内置湿度传感器：**
117 +(% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**Built-in Humidity Sensor:**
121 121  )))
122 122  
123 123  (% _mstvisible="1" %)
... ... @@ -124,22 +124,22 @@
124 124  * (% _mstvisible="3" %)
125 125  (((
126 126  (% _msthash="902997" _msttexthash="282438" _mstvisible="4" %)
127 -分辨率：0.04 %RH
124 +Resolution: 0.04 %RH
128 128  )))
129 129  * (% _mstvisible="3" %)
130 130  (((
131 131  (% _msthash="902998" _msttexthash="628771" _mstvisible="4" %)
132 -精度公差：典型值 ±3 %RH
129 +Accuracy Tolerance : Typ ±3 %RH
133 133  )))
134 134  * (% _mstvisible="3" %)
135 135  (((
136 136  (% _msthash="902999" _msttexthash="504647" _mstvisible="4" %)
137 -长期漂移：< 0.02 °C/年
134 +Long Term Drift: < 0.02 °C/yr
138 138  )))
139 139  * (% _mstvisible="3" %)
140 140  (((
141 141  (% _msthash="903000" _msttexthash="421291" _mstvisible="4" %)
142 -工作范围：0 ~~ 96 %RH
139 +Operating Range: 0 ~~ 96 %RH
143 143  )))
144 144  
145 145  (% _mstvisible="1" %)
... ... @@ -148,7 +148,7 @@
148 148  
149 149  
150 150  (% _mstvisible="2" %)
151 -(% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**外部温度传感器：**
148 +(% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**External Temperature Sensor:**
152 152  )))
153 153  
154 154  (% _mstvisible="1" %)
... ... @@ -155,22 +155,22 @@
155 155  * (% _mstvisible="3" %)
156 156  (((
157 157  (% _msthash="903001" _msttexthash="332254" _mstvisible="4" %)
158 -分辨率：0.0625 °C
155 +Resolution: 0.0625 °C
159 159  )))
160 160  * (% _mstvisible="3" %)
161 161  (((
162 162  (% _msthash="903002" _msttexthash="782600" _mstvisible="4" %)
163 --10°C 至 +85°C 的 ±0.5°C 精度
160 +±0.5°C accuracy from -10°C to +85°C
164 164  )))
165 165  * (% _mstvisible="3" %)
166 166  (((
167 167  (% _msthash="903003" _msttexthash="729482" _mstvisible="4" %)
168 --55°C 至 +125°C 的 ±2°C 精度
165 +±2°C accuracy from -55°C to +125°C
169 169  )))
170 170  * (% _mstvisible="3" %)
171 171  (((
172 172  (% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
173 -工作范围：-55 °C ~~ 125 °C
170 +Operating Range: -55 °C ~~ 125 °C
174 174  
175 175  
176 176  (% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
... ... @@ -178,21 +178,21 @@
178 178  )))
179 179  
180 180  (% _mstvisible="1" %)
181 -= (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. 连接 LHT65N 到物联网服务器(%%) =
178 += (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. Connect LHT65N to IoT Server(%%) =
182 182  
183 183  (% _mstvisible="1" %)
184 -== (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 LHT65N 是如何工作的？(%%) ==
181 +== (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 How does LHT65N work?(%%) ==
185 185  
186 186  (% _mstvisible="1" %)
187 187  (((
188 188  (% _msthash="506060" _msttexthash="28254538" _mstvisible="2" %)
189 -LHT65N 默认配置为 LoRaWAN OTAA Class A 模式。每个 LHT65N 都附带一套全球唯一的 OTAA 密钥。要在 LoRaWAN 网络中使用 LHT65N，首先需要将 OTAA 密钥放入 LoRaWAN Network Server，然后激活 LHT65N。
186 +LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
190 190  )))
191 191  
192 192  (% _mstvisible="1" %)
193 193  (((
194 194  (% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
195 -如果 LHT65N 在这个 LoRaWAN 网络的覆盖范围内。LHT65N 可以自动加入 LoRaWAN 网络。成功加入后，LHT65N 将开始测量环境温度和湿度，并开始将传感器数据传输到 LoRaWAN 服务器。每个上行链路的默认周期为 20 分钟。
192 +If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
196 196  
197 197  (% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
198 198  
... ... @@ -199,19 +199,19 @@
199 199  )))
200 200  
201 201  (% _mstvisible="1" %)
202 -== (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 如何激活 LHT65N？(%%) ==
199 +== (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 How to Activate LHT65N?(%%) ==
203 203  
204 204  (% _msthash="315239" _msttexthash="748241" _mstvisible="1" %)
205 -LHT65N 有两种工作模式：
202 +The LHT65N has two working modes:
206 206  
207 207  (% _mstvisible="1" %)
208 -* **深度睡眠模式**：LHT65N 没有任何 LoRaWAN 激活。此模式用于存储和运输以节省电池寿命。
209 -* **工作模式**：在此模式下，LHT65N 作为 LoRaWAN Sensor 模式加入 LoRaWAN 网络并将传感器数据发送到服务器。在每个周期采样/tx/rx 之间，LHT65 将处于 STOP 模式（IDLE 模式），在 STOP 模式下，LHT65N 的功耗与深度睡眠模式相同。 
205 +* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
206 +* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
210 210  
211 211  (% _mstvisible="1" %)
212 212  (((
213 213  (% _msthash="506062" _msttexthash="6036823" _mstvisible="2" %)
214 -LHT65N 默认设置为深度睡眠模式；正面的ACT键是切换不同模式：
211 +The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
215 215  )))
216 216  
217 217  (% _mstvisible="1" %)
... ... @@ -222,35 +222,35 @@
222 222  
223 223  
224 224  (% _mstvisible="1" %)
225 -== (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 加入LoRaWAN网络示例(%%) ==
222 +== (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 Example to join LoRaWAN network(%%) ==
226 226  
227 227  (% _msthash="315240" _msttexthash="9205482" _mstvisible="1" class="wikigeneratedid" %)
228 -本节展示了如何加入 TTN V3 LoRaWAN IoT 服务器的示例。与其他 LoRaWAN IoT 服务器一起使用的过程类似。
225 +This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
229 229  
230 230  (% _mstvisible="1" class="wikigeneratedid" %)
231 231  [[image:image-20220522232442-1.png||_mstalt="427830" _mstvisible="3" height="387" width="648"]]
232 232  
233 233  (% _msthash="315241" _msttexthash="10802155" _mstvisible="1" %)
234 -假设 LPS8N 已经设置为连接到[[TTN V3 网络>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]]，因此它为 LHT65N 提供网络覆盖。接下来我们需要在 TTN V3 中添加 LHT65N 设备：
231 +Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
235 235  
236 236  
237 237  (% _mstvisible="1" %)
238 -=== (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 第一步：创建Device n TTN(%%) ===
235 +=== (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 Step 1: Create Device n TTN(%%) ===
239 239  
240 240  (% _msthash="315242" _msttexthash="1601782" _mstvisible="1" %)
241 -使用 LHT65N 的 OTAA 密钥在 TTN V3 中创建设备。
238 +Create a device in TTN V3 with the OTAA keys from LHT65N.
242 242  
243 243  (% _msthash="315243" _msttexthash="3694444" _mstvisible="1" %)
244 -每个 LHT65N 都附有一张贴纸，上面有它的设备 EUI、APP Key 和 APP EUI，如下所示：
241 +Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
245 245  
246 246  (% _mstvisible="1" %)
247 247  [[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
248 248  
249 249  (% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
250 -用户可以在 LoRaWAN 服务器门户中输入这些密钥。以下是TTN V3截图：
247 +User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
251 251  
252 252  (% _msthash="315245" _msttexthash="642889" _mstvisible="1" %)
253 -在应用程序中添加 APP EUI。
250 +Add APP EUI in the application.
254 254  
255 255  (% _mstvisible="1" %)
256 256  [[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]
... ... @@ -262,7 +262,7 @@
262 262  [[image:image-20220522232954-5.png||_mstalt="431847" _mstvisible="3"]]
263 263  
264 264  (% _msthash="315246" _msttexthash="878800" _mstvisible="1" %)
265 -注意：LHT65N 使用与 LHT65 相同的有效载荷。
262 +Note: LHT65N use same payload as LHT65.
266 266  
267 267  (% _mstvisible="1" %)
268 268  [[image:image-20220522233026-6.png||_mstalt="429403" _mstvisible="3"]]
... ... @@ -269,7 +269,7 @@
269 269  
270 270  
271 271  (% _msthash="315247" _msttexthash="595543" _mstvisible="1" %)
272 -输入APP EUI、APP KEY和DEV EUI：
269 +Input APP EUI,  APP KEY and DEV EUI:
273 273  
274 274  (% _mstvisible="1" %)
275 275  [[image:image-20220522233118-7.png||_mstalt="430430" _mstvisible="3"]]
... ... @@ -277,10 +277,10 @@
277 277  
278 278  
279 279  (% _mstvisible="1" %)
280 -=== (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 步骤 2：按住 ACT 按钮 5 秒以上激活 LHT65N。(%%) ===
277 +=== (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds.(%%) ===
281 281  
282 282  (% _msthash="315248" _msttexthash="14452321" _mstvisible="1" %)
283 -使用 ACT 按钮激活 LHT65N，它将自动加入 TTN V3 网络。加入成功后，将开始上传传感器数据到TTN V3，用户可以在面板中看到。
280 +Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
284 284  
285 285  (% _mstvisible="1" %)
286 286  [[image:image-20220522233300-8.png||_mstalt="428389" _mstvisible="3" height="219" width="722"]]
... ... @@ -288,19 +288,19 @@
288 288  
289 289  
290 290  (% _mstvisible="1" %)
291 -== (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 上行有效载荷(%%) ==
288 +== (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 Uplink Payload(%%) ==
292 292  
293 293  (% _msthash="315249" _msttexthash="7722962" _mstvisible="1" %)
294 -上行有效载荷总共包括 11 个字节。上行数据包使用 FPORT=2， 默认(% _mstvisible="3" style="color:#4f81bd" %)**每 20 分钟**(%%) 发送一个上行链路。
291 +The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% _mstvisible="3" style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
295 295  
296 296  (% _msthash="315250" _msttexthash="1322711" _mstvisible="1" %)
297 -每次上行后，(% _mstvisible="3" style="color:blue" %)**蓝色 LED**(%%)将闪烁一次。
294 +After each uplink, the (% _mstvisible="3" style="color:blue" %)**BLUE LED**(%%) will blink once.
298 298  
299 299  (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)
300 300  (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)
301 301  (((
302 302  (% _mstvisible="6" %)
303 -(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**大小（字节）**
300 +(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
304 304  )))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)
305 305  (((
306 306  (% _mstvisible="6" %)
... ... @@ -325,17 +325,17 @@
325 325  (% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
326 326  (((
327 327  (% _mstvisible="6" %)
328 -(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**价值**
325 +(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**
329 329  )))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
330 330  (((
331 331  (% _mstvisible="6" %)
332 -[[蝙蝠>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
329 +[[BAT>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
333 333  )))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
334 334  (((
335 335  (% _mstvisible="6" %)
336 336  (((
337 337  (% _mstvisible="7" %)
338 -[[内置温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
335 +[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
339 339  )))
340 340  )))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
341 341  (((
... ... @@ -342,37 +342,37 @@
342 342  (% _mstvisible="6" %)
343 343  (((
344 344  (% _mstvisible="7" %)
345 -[[内置>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
342 +[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
346 346  )))
347 347  
348 348  (% _mstvisible="6" %)
349 349  (((
350 350  (% _mstvisible="7" %)
351 -[[湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
348 +[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
352 352  )))
353 353  )))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
354 354  (((
355 355  (% _mstvisible="6" %)
356 -[[分机>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
353 +[[Ext>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
357 357  )))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
358 358  (((
359 359  (% _mstvisible="6" %)
360 -[[分机值>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
357 +[[Ext value>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
361 361  )))
362 362  
363 363  (% _mstvisible="1" %)
364 -* 前 6 个字节：对每个 LHT65N 都有固定的含义。
365 -* 第 7 个字节（EXT#）：定义外部传感器型号。
366 -* 第 8 (% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^~~^^(%%) 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^字节^^(%%)：外部传感器值。该定义基于外部传感器类型。（如果EXT=0，就不会有这四个字节。）
361 +* The First 6 bytes: has fix meanings for every LHT65N.
362 +* The 7th byte (EXT #): defines the external sensor model.
363 +* The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
367 367  
368 368  (% _mstvisible="1" %)
369 -=== (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 TTN V3中的解码器(%%) ===
366 +=== (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
370 370  
371 371  (% _msthash="315251" _msttexthash="9786491" _mstvisible="1" %)
372 -上行payload到达TTNv3时，显示HEX格式，不便于阅读。为了便于阅读，我们可以在 TTNv3 中添加 LHT65N 解码器。
369 +When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
373 373  
374 374  (% _msthash="315252" _msttexthash="3928483" _mstvisible="1" %)
375 -下面是放解码器的位置，LHT65N解码器可以从这里下载：
372 +Below is the position to put the decoder and LHT65N decoder can be download from here:
376 376  
377 377  (% _mstvisible="1" %)
378 378  [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0||_msthash="315253" _msttexthash="3509064" _mstvisible="2"]]
... ... @@ -383,10 +383,10 @@
383 383  
384 384  
385 385  (% _mstvisible="1" %)
386 -=== (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-电池信息(%%) ===
383 +=== (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-Battery Info(%%) ===
387 387  
388 388  (% _msthash="315254" _msttexthash="3122912" _mstvisible="1" %)
389 -BAT的这两个字节包括电池状态和实际电压
386 +These two bytes of BAT include the battery state and the actually voltage
390 390  
391 391  (% _mstvisible="1" %)
392 392  [[image:image-20220523152839-18.png||_mstalt="457613" _mstvisible="3"]]
... ... @@ -395,41 +395,41 @@
395 395  [[image:image-20220522235639-1.png||_mstalt="431392" _mstvisible="3" height="139" width="727"]]
396 396  
397 397  (% _msthash="315255" _msttexthash="871611" _mstvisible="1" %)
398 -检查 LHT65N 的电池电压。
395 +Check the battery voltage for LHT65N.
399 399  
400 400  (% _mstvisible="1" %)
401 -* BAT状态=(0Xcba4>>14)&0xFF=11(B)，很好
402 -* 电池电压=0xCBF6&0x3FFF=0x0BA4=2980mV
398 +* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
399 +* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
403 403  
404 404  (% _mstvisible="1" %)
405 -=== (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 内置温度(%%) ===
402 +=== (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
406 406  
407 407  (% _mstvisible="1" %)
408 408  [[image:image-20220522235639-2.png||_mstalt="431756" _mstvisible="3" height="138" width="722"]]
409 409  
410 410  (% _mstvisible="1" %)
411 -* 温度：0x0ABB/100=27.47℃
408 +* Temperature:  0x0ABB/100=27.47℃
412 412  
413 413  (% _mstvisible="1" %)
414 414  [[image:image-20220522235639-3.png||_mstalt="432120" _mstvisible="3"]]
415 415  
416 416  (% _mstvisible="1" %)
417 -* 温度：(0xF5C6-65536)/100=-26.18℃
414 +* Temperature:  (0xF5C6-65536)/100=-26.18℃
418 418  
419 419  (% _mstvisible="1" %)
420 -=== (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 内置湿度(%%) ===
417 +=== (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
421 421  
422 422  (% _mstvisible="1" %)
423 423  [[image:image-20220522235639-4.png||_mstalt="432484" _mstvisible="3" height="138" width="722"]]
424 424  
425 425  (% _mstvisible="1" %)
426 -* 湿度：0x025C/10=60.4%
423 +* Humidity:    0x025C/10=60.4%
427 427  
428 428  (% _mstvisible="1" %)
429 -=== (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 分机#(%%) ===
426 +=== (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
430 430  
431 431  (% _msthash="315256" _msttexthash="552240" _mstvisible="1" %)
432 -外部传感器的字节数：
429 +Bytes for External Sensor:
433 433  
434 434  (% _mstvisible="1" %)
435 435  [[image:image-20220523152822-17.png||_mstalt="454545" _mstvisible="3"]]
... ... @@ -436,10 +436,10 @@
436 436  
437 437  
438 438  (% _mstvisible="1" %)
439 -=== (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 外部值(%%) ===
436 +=== (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 Ext value(%%) ===
440 440  
441 441  (% _mstvisible="1" %)
442 -==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1，E3温度传感器(%%) ====
439 +==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1, E3 Temperature Sensor(%%) ====
443 443  
444 444  (% _mstvisible="1" %)
445 445  [[image:image-20220522235639-5.png||_mstalt="432848" _mstvisible="3"]]
... ... @@ -446,10 +446,10 @@
446 446  
447 447  
448 448  (% _mstvisible="1" %)
449 -* DS18B20 温度=0x0ADD/100=27.81℃
446 +* DS18B20 temp=0x0ADD/100=27.81℃
450 450  
451 451  (% _msthash="315257" _msttexthash="1038479" _mstvisible="1" %)
452 -最后 2 个字节的数据没有意义
449 +The last 2 bytes of data are meaningless
453 453  
454 454  (% _mstvisible="1" %)
455 455  [[image:image-20220522235639-6.png||_mstalt="433212" _mstvisible="3"]]
... ... @@ -456,33 +456,33 @@
456 456  
457 457  
458 458  (% _mstvisible="1" %)
459 -* 外部温度= (0xF54F-65536)/100=-27.37℃
456 +* External temperature= (0xF54F-65536)/100=-27.37℃
460 460  
461 461  (% _mstvisible="1" %)
462 462  (((
463 463  (% _msthash="506063" _msttexthash="1038479" _mstvisible="2" %)
464 -最后 2 个字节的数据没有意义
461 +The last 2 bytes of data are meaningless
465 465  )))
466 466  
467 467  (% _mstvisible="1" %)
468 468  (((
469 469  (% _msthash="506064" _msttexthash="21185632" _mstvisible="2" %)
470 -如果外部传感器为 0x01，并且没有连接外部温度。温度将设置为 7FFF，即 327.67℃
467 +If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
471 471  )))
472 472  
473 473  
474 474  
475 475  (% _mstvisible="1" %)
476 -==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9，带 Unix 时间戳的 E3 传感器(%%) ====
473 +==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
477 477  
478 478  (% _msthash="315258" _msttexthash="41539368" _mstvisible="1" %)
479 -时间戳模式是为带有 E3 探针的 LHT65N 设计的，它将发送带有 Unix 时间戳的上行负载。有 11 个字节的限制（AU915/US915/AS923 频段的最大距离），时间戳模式将缺少 BAT 电压字段，而是显示电池状态。有效载荷如下：
476 +Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
480 480  
481 481  (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
482 482  (% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 96px;" %)(% _mstvisible="5" %)
483 483  (((
484 484  (% _mstvisible="6" %)
485 -(% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**大小（字节）**
482 +(% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
486 486  )))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
487 487  (((
488 488  (% _mstvisible="6" %)
... ... @@ -507,23 +507,23 @@
507 507  (% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
508 508  (((
509 509  (% _mstvisible="6" %)
510 -(% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**价值**
507 +(% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**Value**
511 511  )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
512 512  (((
513 513  (% _mstvisible="6" %)
514 -[[外部温度>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
511 +[[External temperature>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
515 515  )))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
516 516  (((
517 517  (% _mstvisible="6" %)
518 518  (((
519 519  (% _mstvisible="7" %)
520 -[[内置>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
517 +[[Built-In>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
521 521  )))
522 522  
523 523  (% _mstvisible="6" %)
524 524  (((
525 525  (% _mstvisible="7" %)
526 -[[温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
523 +[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
527 527  )))
528 528  )))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
529 529  (((
... ... @@ -530,52 +530,52 @@
530 530  (% _mstvisible="6" %)
531 531  (((
532 532  (% _msthash="2224747" _msttexthash="136331" _mstvisible="7" %)
533 -BAT 状态 &
530 +BAT Status &
534 534  )))
535 535  
536 536  (% _mstvisible="6" %)
537 537  (((
538 538  (% _mstvisible="7" %)
539 -[[内置湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
536 +[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
540 540  )))
541 541  )))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
542 542  (((
543 543  (% _msthash="1817496" _msttexthash="147225" _mstvisible="6" %)
544 -状态和分机
541 +Status & Ext
545 545  )))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
546 546  (((
547 547  (% _mstvisible="6" %)
548 548  (((
549 549  (% _mstvisible="7" %)
550 -[[Unix 时间戳>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
547 +[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
551 551  )))
552 552  )))
553 553  
554 554  (% _mstvisible="1" %)
555 -* (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**电池状态和 **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**内置湿度**
552 +* (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**Battery status & **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**
556 556  
557 557  (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:469px" %)
558 -(% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)位（位）|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
559 -(% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)价值|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
555 +(% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)Bit(bit)|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
556 +(% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)Value|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
560 560  (((
561 561  (% _msthash="1817497" _msttexthash="128427" _mstvisible="6" %)
562 -BAT 状态
559 +BAT Status
563 563  
564 564  (% _msthash="1817498" _msttexthash="472784" _mstvisible="6" %)
565 -00(b)：超低（BAT <= 2.50v）
562 +00(b): Ultra Low ( BAT <= 2.50v)
566 566  
567 567  (% _msthash="1817499" _msttexthash="483678" _mstvisible="6" %)
568 -01(b)：低（2.50v <=BAT <= 2.55v）
565 +01(b): Low  (2.50v <=BAT <= 2.55v)
569 569  
570 570  (% _msthash="1817500" _msttexthash="440791" _mstvisible="6" %)
571 -10（b）：正常（2.55v <= BAT <=2.65v）
568 +10(b): OK   (2.55v <= BAT <=2.65v)
572 572  
573 573  (% _msthash="1817501" _msttexthash="334191" _mstvisible="6" %)
574 -11(b)：好（BAT >= 2.65v）
571 +11(b): Good   (BAT >= 2.65v)
575 575  )))|(% _mstvisible="4" style="width:134px" %)(% _mstvisible="5" %)
576 576  (((
577 577  (% _mstvisible="6" %)
578 -[[内置湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
575 +[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
579 579  
580 580  (% _mstvisible="6" %)
581 581  
... ... @@ -582,38 +582,38 @@
582 582  )))
583 583  
584 584  (% _mstvisible="1" %)
585 -* (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**状态和外部字节**
582 +* (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**Status & Ext Byte**
586 586  
587 587  (% _mstvisible="1" %)
588 588  [[image:image-20220523152434-16.png||_mstalt="453921" _mstvisible="3"]]
589 589  
590 590  (% _mstvisible="1" %)
591 -* 轮询消息标志：1：此消息是轮询消息回复，0：表示这是正常上行。
592 -* 同步时间OK：1：设定时间OK，0：N/A。发送时间 SYNC 请求后，LHT65N 会将该位设置为 0，直到从应用服务器获得时间戳。
593 -* Unix时间请求：1：请求服务器下行Unix时间，0：N/A。在此模式下，LHT65N 将每 10 天将该位设置为 1 以请求时间 SYNC。（AT+SYNCMOD 设置此项）
588 +* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
589 +* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
590 +* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
594 594  
595 595  (% _mstvisible="1" %)
596 -== (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 在Datacake上显示数据(%%) ==
593 +== (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
597 597  
598 598  (% _msthash="315259" _msttexthash="20933341" _mstvisible="1" %)
599 -Datacake物联网平台提供了一个人性化的界面来展示传感器数据，一旦我们在TTN V3中有传感器数据，我们可以使用Datacake连接到TTN V3并查看Datacake中的数据。以下是步骤：
596 +Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
600 600  
601 601  (% _mstvisible="1" %)
602 602  (((
603 603  (% _msthash="506065" _msttexthash="4753983" _mstvisible="2" %)
604 -(% _mstvisible="3" %)**第 1 步**(%%)：确保您的设备已编程并正确连接到 LoRaWAN 网络。
601 +(% _mstvisible="3" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
605 605  )))
606 606  
607 607  (% _mstvisible="1" %)
608 608  (((
609 609  (% _msthash="506066" _msttexthash="14696682" _mstvisible="2" %)
610 -(% _mstvisible="3" %)**第 2 步**(%%)：配置您的应用程序以将数据转发到 Datacake，您需要添加集成。转到 TTN V3 控制台 ~-~-> 应用程序 ~-~-> 集成 ~-~-> 添加集成。
607 +(% _mstvisible="3" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
611 611  )))
612 612  
613 613  (% _mstvisible="1" %)
614 614  (((
615 615  (% _msthash="506067" _msttexthash="180297" _mstvisible="2" %)
616 -添加数据蛋糕：
613 +Add Datacake:
617 617  )))
618 618  
619 619  (% _mstvisible="1" %)
... ... @@ -621,13 +621,13 @@
621 621  
622 622  
623 623  (% _msthash="315260" _msttexthash="750178" _mstvisible="1" %)
624 -选择默认密钥作为访问密钥：
621 +Select default key as Access Key:
625 625  
626 626  (% _mstvisible="1" %)
627 627  [[image:image-20220523000825-8.png||_mstalt="430248" _mstvisible="3" height="453" width="406"]]
628 628  
629 629  (% _msthash="315261" _msttexthash="2134964" _mstvisible="1" %)
630 -在 Datacake 控制台 ( [[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]] ) 中，添加 LHT65 设备。
627 +In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]]) , add LHT65 device.
631 631  
632 632  (% _mstvisible="1" %)
633 633  [[image:image-20220523000825-9.png||_mstalt="430612" _mstvisible="3" height="366" width="392"]]
... ... @@ -638,27 +638,27 @@
638 638  
639 639  
640 640  (% _mstvisible="1" %)
641 -== (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 数据记录功能(%%) ==
638 +== (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 Datalog Feature(%%) ==
642 642  
643 643  (% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
644 -Datalog Feature 是为了确保即使 LoRaWAN 网络出现故障，IoT Server 也可以从 Sensor 获取所有采样数据。对于每次采样，LHT65N 将存储读数以供将来检索。物联网服务器有两种方式从 LHT65N 获取数据日志。
641 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
645 645  
646 646  
647 647  (% _mstvisible="1" %)
648 -=== (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 通过 LoRaWAN 获取数据日志的方式(%%) ===
645 +=== (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 Ways to get datalog via LoRaWAN(%%) ===
649 649  
650 650  (% _msthash="315263" _msttexthash="409604" _mstvisible="1" %)
651 -有两种方法：
648 +There are two methods:
652 652  
653 653  (% _mstvisible="1" %)
654 -1. IoT Server 发送下行 LoRaWAN 命令以[[轮询>>||anchor="H2.6.4Pollsensorvalue"]]指定时间范围的值。
655 -1. 设置[[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]]，LHT65N每次上行都会等待ACK，当没有LoRaWAN网络时，LHT65N会存储传感器数据，网络恢复后会发送所有消息。
651 +1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
652 +1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
656 656  
657 657  (% _mstvisible="1" %)
658 -=== (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix时间戳(%%) ===
655 +=== (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
659 659  
660 660  (% _msthash="315264" _msttexthash="1182285" _mstvisible="1" %)
661 -LHT65N 使用 Unix TimeStamp 格式，基于
658 +LHT65N uses Unix TimeStamp format based on
662 662  
663 663  (% _mstvisible="1" %)
664 664  [[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
... ... @@ -667,13 +667,13 @@
667 667  (% _mstvisible="1" %)
668 668  (((
669 669  (% _msthash="506068" _msttexthash="2717234" _mstvisible="2" %)
670 -用户可以从链接获得这个时间：  [[https>>url:https://www.epochconverter.com/||_mstvisible="3"]] :~/~/www.epochconverter.com/ ：
667 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
671 671  )))
672 672  
673 673  (% _mstvisible="1" %)
674 674  (((
675 675  (% _msthash="506069" _msttexthash="709813" _mstvisible="2" %)
676 -下面是转换器示例
673 +Below is the converter example
677 677  )))
678 678  
679 679  (% _mstvisible="1" %)
... ... @@ -680,40 +680,40 @@
680 680  [[image:image-20220523001219-12.png||_mstalt="450827" _mstvisible="3" height="298" width="720"]]
681 681  
682 682  (% _msthash="315265" _msttexthash="15137317" _mstvisible="1" %)
683 -所以，我们可以使用 AT+TIMESTAMP=1611889405 或者下行 3060137afd00 来设置当前时间 2021 – Jan ~-~- 29 Friday 03:03:25
680 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
684 684  
685 685  
686 686  (% _mstvisible="1" %)
687 -=== (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 设置设备时间(%%) ===
684 +=== (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 Set Device Time(%%) ===
688 688  
689 689  (% _mstvisible="1" %)
690 690  (((
691 691  (% _msthash="506070" _msttexthash="4521946" _mstvisible="2" %)
692 -设置设备时间的方法有两种：
689 +There are two ways to set device’s time:
693 693  )))
694 694  
695 695  (% _mstvisible="1" %)
696 696  (((
697 697  (% _mstvisible="2" %)
698 -(% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. 通过 LoRaWAN MAC 命令（默认设置）**
695 +(% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. Through LoRaWAN MAC Command (Default settings)**
699 699  )))
700 700  
701 701  (% _mstvisible="1" %)
702 702  (((
703 703  (% _msthash="506072" _msttexthash="2126267" _mstvisible="2" %)
704 -用户需要通过 MAC 命令设置 SYNCMOD=1 来启用同步时间。
701 +User need to set SYNCMOD=1 to enable sync time via MAC command.
705 705  )))
706 706  
707 707  (% _mstvisible="1" %)
708 708  (((
709 709  (% _msthash="506073" _msttexthash="54430324" _mstvisible="2" %)
710 -一旦 LHT65N 加入 LoRaWAN 网络，它会发送 MAC 命令 (DeviceTimeReq)，服务器会回复 (DeviceTimeAns) 将当前时间发送给 LHT65N。如果 LHT65N 无法从服务器获取时间，LHT65N 将使用内部时间等待下一次请求（AT+SYNCTDC 设置时间请求周期，默认为 10 天）。
707 +Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
711 711  )))
712 712  
713 713  (% _mstvisible="1" %)
714 714  (((
715 715  (% _msthash="506074" _msttexthash="92531127" _mstvisible="2" %)
716 -注意：LoRaWAN 服务器需要支持 LoRaWAN v1.0.3(MAC v1.0.3) 或更高版本才能支持此 MAC 命令功能，Chirpstack、TTN V3 v3 和 loriot 支持但 TTN V3 v2 不支持。如果服务器不支持该命令，它将通过该命令将上行数据包通过，因此如果 SYNCMOD=1，用户将丢失带有时间请求的 TTN V3 v2 数据包。
713 +Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
717 717  )))
718 718  
719 719  (% _mstvisible="1" %)
... ... @@ -725,13 +725,13 @@
725 725  (% _mstvisible="1" %)
726 726  (((
727 727  (% _mstvisible="2" %)
728 -(% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2.手动设置时间**
725 +(% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2. Manually Set Time**
729 729  )))
730 730  
731 731  (% _mstvisible="1" %)
732 732  (((
733 733  (% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
734 -用户需要手动设置SYNCMOD=0，否则用户设置的时间会被服务器设置的时间覆盖。
731 +User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
735 735  
736 736  (% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
737 737  
... ... @@ -738,10 +738,10 @@
738 738  )))
739 739  
740 740  (% _mstvisible="1" %)
741 -=== (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 轮询传感器值(%%) ===
738 +=== (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 Poll sensor value(%%) ===
742 742  
743 743  (% _msthash="315266" _msttexthash="4955821" _mstvisible="1" %)
744 -用户可以根据来自服务器的时间戳轮询传感器值。下面是下行命令。
741 +User can poll sensor value based on timestamps from the server. Below is the downlink command.
745 745  
746 746  (% _mstvisible="1" %)
747 747  [[image:image-20220523152302-15.png||_mstalt="451581" _mstvisible="3"]]
... ... @@ -749,38 +749,38 @@
749 749  (% _mstvisible="1" %)
750 750  (((
751 751  (% _msthash="506077" _msttexthash="14670916" _mstvisible="2" %)
752 -Timestamp start 和 Timestamp end 使用上面提到的 Unix TimeStamp 格式。设备将在此时间段内回复所有数据日志，使用上行链路间隔。
749 +Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
753 753  )))
754 754  
755 755  (% _mstvisible="1" %)
756 756  (((
757 757  (% _mstvisible="2" %)
758 -例如下行命令(% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
755 +For example, downlink command (% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
759 759  )))
760 760  
761 761  (% _mstvisible="1" %)
762 762  (((
763 763  (% _msthash="506078" _msttexthash="6907459" _mstvisible="2" %)
764 -是检查 2020/12/1 07:40:00 到 2020/12/1 08:40:00 的数据
761 +Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
765 765  )))
766 766  
767 767  (% _mstvisible="1" %)
768 768  (((
769 769  (% _msthash="506079" _msttexthash="23531573" _mstvisible="2" %)
770 -Uplink Internal =5s，表示LHT65N每5s发送一个数据包。范围 5~~255s。
767 +Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
771 771  )))
772 772  
773 773  
774 774  (% _mstvisible="1" %)
775 -=== (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 数据日志上行有效载荷(%%) ===
772 +=== (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 Datalog Uplink payload(%%) ===
776 776  
777 777  (% _msthash="315267" _msttexthash="2245087" _mstvisible="1" %)
778 -Datalog 轮询回复上行链路将使用以下有效负载格式。
775 +The Datalog poll reply uplink will use below payload format.
779 779  
780 780  (% _mstvisible="1" %)
781 781  (((
782 782  (% _mstvisible="2" %)
783 -(% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**检索数据有效载荷**
780 +(% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**Retrieval data payload**
784 784  )))
785 785  
786 786  (% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
... ... @@ -789,7 +789,7 @@
789 789  (% _mstvisible="6" %)
790 790  (((
791 791  (% _mstvisible="7" %)
792 -(% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**大小（字节）**
789 +(% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**Size(bytes)**
793 793  )))
794 794  )))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
795 795  (((
... ... @@ -832,7 +832,7 @@
832 832  (% _mstvisible="6" %)
833 833  (((
834 834  (% _mstvisible="7" %)
835 -(% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**价值**
832 +(% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**Value**
836 836  )))
837 837  )))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
838 838  (((
... ... @@ -839,7 +839,7 @@
839 839  (% _mstvisible="6" %)
840 840  (((
841 841  (% _mstvisible="7" %)
842 -[[外部传感器数据>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
839 +[[External sensor data>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
843 843  )))
844 844  )))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
845 845  (((
... ... @@ -848,7 +848,7 @@
848 848  (% _mstvisible="7" %)
849 849  (((
850 850  (% _mstvisible="8" %)
851 -[[内置>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
848 +[[Built In>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
852 852  )))
853 853  )))
854 854  
... ... @@ -857,7 +857,7 @@
857 857  (% _mstvisible="7" %)
858 858  (((
859 859  (% _mstvisible="8" %)
860 -[[温度>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
857 +[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
861 861  )))
862 862  )))
863 863  )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
... ... @@ -867,7 +867,7 @@
867 867  (% _mstvisible="7" %)
868 868  (((
869 869  (% _mstvisible="8" %)
870 -[[内置>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
867 +[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
871 871  )))
872 872  )))
873 873  
... ... @@ -876,7 +876,7 @@
876 876  (% _mstvisible="7" %)
877 877  (((
878 878  (% _mstvisible="8" %)
879 -[[湿度>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
876 +[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
880 880  )))
881 881  )))
882 882  )))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
... ... @@ -884,7 +884,7 @@
884 884  (% _mstvisible="6" %)
885 885  (((
886 886  (% _msthash="2224758" _msttexthash="390390" _mstvisible="7" %)
887 -轮询消息标志和分机
884 +Poll message flag & Ext
888 888  )))
889 889  )))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
890 890  (((
... ... @@ -893,7 +893,7 @@
893 893  (% _mstvisible="7" %)
894 894  (((
895 895  (% _mstvisible="8" %)
896 -[[Unix 时间戳>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
893 +[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
897 897  )))
898 898  )))
899 899  
... ... @@ -908,7 +908,7 @@
908 908  )))
909 909  
910 910  (% _mstvisible="1" %)
911 -(% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**轮询消息标志和分机**
908 +(% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**Poll message flag & Ext**
912 912  
913 913  (% _mstvisible="1" %)
914 914  [[image:image-20220523152208-14.png||_mstalt="452920" _mstvisible="3"]]
... ... @@ -918,7 +918,7 @@
918 918  (% _mstvisible="2" %)
919 919  (((
920 920  (% _msthash="736723" _msttexthash="2005003" _mstvisible="3" %)
921 -轮询消息标志： 1：此消息是轮询消息回复。
918 +Poll Message Flag: 1: This message is a poll message reply.
922 922  )))
923 923  )))
924 924  
... ... @@ -928,7 +928,7 @@
928 928  (% _mstvisible="4" %)
929 929  (((
930 930  (% _msthash="1197157" _msttexthash="561548" _mstvisible="5" %)
931 -轮询消息标志设置为 1。
928 +Poll Message Flag is set to 1.
932 932  )))
933 933  )))
934 934  * (% _mstvisible="3" %)
... ... @@ -936,7 +936,7 @@
936 936  (% _mstvisible="4" %)
937 937  (((
938 938  (% _msthash="1197158" _msttexthash="9284964" _mstvisible="5" %)
939 -每个数据条目为 11 个字节，为了节省通话时间和电池，设备将根据当前的 DR 和频段发送最大字节数。
936 +Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
940 940  )))
941 941  )))
942 942  
... ... @@ -948,7 +948,7 @@
948 948  
949 949  
950 950  (% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
951 -例如，在 US915 频段，不同 DR 的最大有效载荷为：
948 +For example, in US915 band, the max payload for different DR is:
952 952  )))
953 953  )))
954 954  
... ... @@ -957,7 +957,7 @@
957 957  (% _mstvisible="2" %)
958 958  (((
959 959  (% _msthash="736725" _msttexthash="1065532" _mstvisible="3" %)
960 -a) DR0：最大为 11 个字节，因此一个数据条目
957 +a) DR0: max is 11 bytes so one entry of data
961 961  )))
962 962  )))
963 963  
... ... @@ -966,7 +966,7 @@
966 966  (% _mstvisible="2" %)
967 967  (((
968 968  (% _msthash="736726" _msttexthash="3265665" _mstvisible="3" %)
969 -b) DR1：最大为 53 字节，因此设备将上传 4 个数据条目（共 44 字节）
966 +b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
970 970  )))
971 971  )))
972 972  
... ... @@ -975,7 +975,7 @@
975 975  (% _mstvisible="2" %)
976 976  (((
977 977  (% _msthash="736727" _msttexthash="1454115" _mstvisible="3" style="text-align: left;" %)
978 -c) DR2：总有效载荷包括 11 个数据条目
975 +c) DR2: total payload includes 11 entries of data
979 979  )))
980 980  )))
981 981  
... ... @@ -984,7 +984,7 @@
984 984  (% _mstvisible="2" %)
985 985  (((
986 986  (% _msthash="736728" _msttexthash="1483924" _mstvisible="3" style="text-align: left;" %)
987 -d) DR3：总有效载荷包括 22 个数据条目。
984 +d) DR3: total payload includes 22 entries of data.
988 988  )))
989 989  )))
990 990  
... ... @@ -993,16 +993,16 @@
993 993  (% _mstvisible="2" %)
994 994  (((
995 995  (% _msthash="736729" _msttexthash="5848349" _mstvisible="3" style="text-align: left;" %)
996 -如果设计在轮询时间内没有任何数据。设备将上行 11 个字节的 0   
993 +If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0   
997 997  )))
998 998  )))
999 999  
1000 1000  
1001 1001  (% _mstvisible="1" style="text-align: left;" %)
1002 -(% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**例子：**
999 +(% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**Example:**
1003 1003  
1004 1004  (% _msthash="315270" _msttexthash="913822" _mstvisible="1" style="text-align: left;" %)
1005 -如果 LHT65N 在 Flash 中有以下数据：
1002 +If LHT65N has below data inside Flash:
1006 1006  
1007 1007  (% _mstvisible="1" %)
1008 1008  [[image:image-20220523144455-1.png||_mstalt="430040" _mstvisible="3" height="335" width="735"]]
... ... @@ -1010,19 +1010,19 @@
1010 1010  (% _mstvisible="1" %)
1011 1011  (((
1012 1012  (% _msthash="506081" _msttexthash="1663961" _mstvisible="2" style="text-align: left;" %)
1013 -如果用户发送以下下行命令： (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
1010 +If user sends below downlink command: (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
1014 1014  )))
1015 1015  
1016 1016  (% _mstvisible="1" %)
1017 1017  (((
1018 1018  (% _msthash="506082" _msttexthash="1092494" _mstvisible="2" style="text-align: left;" %)
1019 - 其中：开始时间：60065F97 = 时间 21/1/19 04:27:03
1016 + Where : Start time: 60065F97 = time 21/1/19 04:27:03
1020 1020  )))
1021 1021  
1022 1022  (% _mstvisible="1" %)
1023 1023  (((
1024 1024  (% _msthash="506083" _msttexthash="737269" _mstvisible="2" style="text-align: left;" %)
1025 - 停止时间 60066DA7= 时间 21/1/19 (% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)05:27:03
1022 + Stop time 60066DA7= time 21/1/19 05:27:(% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)03
1026 1026  )))
1027 1027  
1028 1028  (% _mstvisible="1" %)
... ... @@ -1034,7 +1034,7 @@
1034 1034  (% _mstvisible="1" %)
1035 1035  (((
1036 1036  (% _msthash="506084" _msttexthash="751218" _mstvisible="2" style="text-align: left;" %)
1037 -LHT65N 将上传此有效载荷。
1034 +LHT65N will uplink this payload.
1038 1038  )))
1039 1039  
1040 1040  (% _mstvisible="1" %)
... ... @@ -1044,78 +1044,78 @@
1044 1044  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
1045 1045  
1046 1046  (% _msthash="315237" _msttexthash="1385839" %)
1047 -其中前 11 个字节用于第一个条目：
1044 +Where the first 11 bytes is for the first entry:
1048 1048  
1049 1049  (% _msthash="315238" _msttexthash="274846" %)
1050 1050  7FFF089801464160065F97
1051 1051  
1052 1052  (% _msthash="315239" _msttexthash="617435" %)
1053 -外部传感器数据=0x7FFF/100=327.67
1050 +Ext sensor data=0x7FFF/100=327.67
1054 1054  
1055 1055  (% _msthash="315240" _msttexthash="270543" %)
1056 -温度=0x0898/100=22.00
1053 +Temp=0x0898/100=22.00
1057 1057  
1058 1058  (% _msthash="315241" _msttexthash="211783" %)
1059 -嗡嗡声=0x0146/10=32.6
1056 +Hum=0x0146/10=32.6
1060 1060  
1061 1061  (% _msthash="315242" _msttexthash="1569776" %)
1062 -poll message flag & Ext=0x41,表示回复数据,Ext=1
1059 +poll message flag & Ext=0x41,means reply data,Ext=1
1063 1063  
1064 1064  (% _msthash="315243" _msttexthash="1120509" %)
1065 -Unix 时间是 0x60065F97=1611030423s=21/1/19 04:27:03
1062 +Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
1066 1066  
1067 1067  
1068 1068  (% _mstvisible="1" style="text-align: left;" %)
1069 -== (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 报警方式(%%) ==
1066 +== (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 Alarm Mode(%%) ==
1070 1070  
1071 1071  (% _msthash="315279" _msttexthash="16493308" _mstvisible="1" style="text-align: left;" %)
1072 -当设备处于报警模式时，它会在短时间内检查内置传感器温度。如果温度超过预先配置的范围，它会立即发送上行链路。
1069 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
1073 1073  
1074 1074  (% _mstvisible="1" %)
1075 1075  (((
1076 1076  (% _mstvisible="2" style="text-align: left;" %)
1077 -(% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)注意：闹钟模式会增加一点功耗，建议开启此功能后延长正常读取时间。
1074 +(% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.
1078 1078  )))
1079 1079  
1080 1080  (% _mstvisible="1" style="text-align: left;" %)
1081 -(% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**警报模式的命令：**
1078 +(% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**AT COMMAND FOR ALARM MODE:**
1082 1082  
1083 1083  (% _mstvisible="1" class="box infomessage" %)
1084 1084  (((
1085 1085  (% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1086 -(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%)：启用/禁用报警模式。（0：禁用，1：启用）
1083 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
1087 1087  
1088 1088  (% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1089 -(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%)：检测报警温度的时间间隔。（以分钟为单位）
1086 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
1090 1090  
1091 1091  (% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1092 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%)：获取或设置内部温度传感器的报警范围
1089 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1093 1093  
1094 1094  (% _mstvisible="2" style="text-align: left;" %)
1095 -(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%)：获取内部温度传感器的报警范围(% _mstvisible="3" style="display:none" %)
1092 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1096 1096  
1097 1097  (% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1098 -(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%)：设置内部温度传感器报警范围从 45 到 105。
1095 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
1099 1099  )))
1100 1100  
1101 1101  
1102 1102  
1103 1103  (% _msthash="72514" _msttexthash="253149" _mstvisible="1" style="text-align: left;" %)
1104 -== (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%) LED 指示灯 ==
1101 +== (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%)LED Indicator ==
1105 1105  
1106 1106  (% _mstvisible="1" %)
1107 1107  (((
1108 1108  (% _msthash="197769" _msttexthash="2924142" style="text-align: left;" %)
1109 -LHT65有一个三色LED，便于显示不同的阶段。
1106 +The LHT65 has a triple color LED which for easy showing different stage .
1110 1110  
1111 1111  (% _msthash="289211" _msttexthash="3402659" style="text-align: left;" %)
1112 -当用户按下 ACT 按钮时，LED 将根据 ACT 按钮的 LED 状态工作。
1109 +While user press ACT button, the LED will work as per LED status with ACT button.
1113 1113  )))
1114 1114  
1115 1115  (% _mstvisible="1" %)
1116 1116  (((
1117 1117  (% _msthash="506092" _msttexthash="521573" _mstvisible="2" style="text-align: left;" %)
1118 -正常工作状态下：
1115 +In a normal working state:
1119 1119  )))
1120 1120  
1121 1121  (% _mstvisible="1" %)
... ... @@ -1122,28 +1122,30 @@
1122 1122  * (% _mstvisible="3" %)
1123 1123  (((
1124 1124  (% _msthash="903005" _msttexthash="1647204" _mstvisible="4" %)
1125 -对于每个上行链路，蓝色 LED 或红色 LED 将闪烁(% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)一次(%%)。(% style="display:none" %)
1122 +For each uplink, the BLUE LED or RED LED will blink (% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)once(%%).(% style="display:none" %)
1126 1126  
1127 1127  (% _msthash="197771" _msttexthash="1202526" %)
1128 -(% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)连接外部传感器时的蓝色 LED
1125 +(% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)BLUE LED when external sensor is connected
1129 1129  )))
1130 1130  * (% _mstvisible="3" %)
1131 1131  (((
1132 1132  (% _msthash="903007" _msttexthash="1334749" _mstvisible="4" %)
1133 -未连接外部传感器时的红色 LED
1130 +RED LED when external sensor is not connected
1134 1134  )))
1135 1135  * (% _mstvisible="3" %)
1136 1136  (((
1137 1137  (% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1138 -对于每次成功的下行链路，紫色 LED 将闪烁一次
1135 +For each success downlink, the PURPLE LED will blink once
1139 1139  
1140 1140  
1141 1141  
1139 +
1140 +(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
1142 1142  
1143 1143  )))
1144 1144  
1145 1145  (% _mstvisible="1" style="text-align: left;" %)
1146 -== (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 安装(%%) ==
1145 +== (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 installation(%%) ==
1147 1147  
1148 1148  (% _mstvisible="1" %)
1149 1149  [[image:image-20220516231650-1.png||_mstalt="428597" _mstvisible="3" height="436" width="428"]]
... ... @@ -1150,33 +1150,33 @@
1150 1150  
1151 1151  
1152 1152  (% _msthash="604150" _msttexthash="563212" _mstvisible="1" style="text-align: left;" %)
1153 -= (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3.(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)传感器(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) 和(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)附件(%%) =
1152 += (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
1154 1154  
1155 1155  (% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1156 -== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1 (% _msthash="487110" _msttexthash="455390" %) E3 温度探头(%%) ==
1155 +== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(% _msthash="487110" _msttexthash="455390" %) E3 Temperature Probe(%%) ==
1157 1157  
1158 1158  (% _mstvisible="1" %)
1159 -[[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="照片-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
1158 +[[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
1160 1160  
1161 1161  
1162 1162  (% _msthash="315354" _msttexthash="1270971" _mstvisible="1" style="text-align: left;" %)
1163 -带有 2 米长电缆的温度传感器
1162 +Temperature sensor with 2 meters cable long
1164 1164  
1165 1165  (% _mstvisible="1" %)
1166 -* 分辨率：0.0625 °C
1167 -* -10°C 至 +85°C 的 ±0.5°C 精度
1168 -* -55°C 至 +125°C 的 ±2°C 精度
1169 -* 工作范围：-40 ~~ 125 °C
1170 -* -55°C 至 125°C
1171 -* 工作电压2.35v～5v
1165 +* Resolution: 0.0625 °C
1166 +* ±0.5°C accuracy from -10°C to +85°C
1167 +* ±2°C accuracy from -55°C to +125°C
1168 +* Operating Range: -40 ~~ 125 °C
1169 +* -55°C to 125°C
1170 +* Working voltage 2.35v ~~ 5v
1172 1172  
1173 1173  (% _mstvisible="1" style="text-align: left;" %)
1174 -= (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4.通过AT指令或LoRaWAN下行配置LHT65N(%%) =
1173 += (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1175 1175  
1176 1176  (% _mstvisible="1" %)
1177 1177  (((
1178 1178  (% _msthash="506246" _msttexthash="2005926" _mstvisible="2" style="text-align: left;" %)
1179 -使用可以通过 AT 命令或 LoRaWAN Downlink 配置 LHT65N。
1178 +Use can configure LHT65N via AT Command or LoRaWAN Downlink.
1180 1180  )))
1181 1181  
1182 1182  (% _mstvisible="1" %)
... ... @@ -1183,12 +1183,12 @@
1183 1183  * (% _mstvisible="3" %)
1184 1184  (((
1185 1185  (% _msthash="903318" _msttexthash="635544" _mstvisible="4" %)
1186 -AT 命令连接：请参阅[[常见问题解答>>||anchor="H6.FAQ"]]。
1185 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
1187 1187  )))
1188 1188  * (% _mstvisible="3" %)
1189 1189  (((
1190 1190  (% _msthash="903319" _msttexthash="3225859" _mstvisible="4" %)
1191 -不同平台的LoRaWAN下行指令：[[IoT LoRaWAN Server>>doc:Main.WebHome]]
1190 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
1192 1192  )))
1193 1193  
1194 1194  (% _mstvisible="1" %)
... ... @@ -1200,19 +1200,19 @@
1200 1200  (% _mstvisible="1" %)
1201 1201  (((
1202 1202  (% _msthash="506248" _msttexthash="2144051" _mstvisible="2" style="text-align: left;" %)
1203 -有两种配置 LHT65N 的命令，它们是：
1202 +There are two kinds of commands to configure LHT65N, they are:
1204 1204  )))
1205 1205  
1206 1206  (% _mstvisible="1" %)
1207 1207  (((
1208 1208  (% _mstvisible="2" style="text-align: left;" %)
1209 -(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**一般命令**(% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)。
1208 +(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _mstmutation="1" _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _mstmutation="1" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
1210 1210  )))
1211 1211  
1212 1212  (% _mstvisible="1" %)
1213 1213  (((
1214 1214  (% _msthash="506250" _msttexthash="774527" _mstvisible="2" style="text-align: left;" %)
1215 -这些命令用于配置：
1214 +These commands are to configure:
1216 1216  )))
1217 1217  
1218 1218  (% _mstvisible="1" %)
... ... @@ -1219,18 +1219,18 @@
1219 1219  * (% _mstvisible="3" %)
1220 1220  (((
1221 1221  (% _msthash="903320" _msttexthash="1503580" _mstvisible="4" %)
1222 -常规系统设置，例如：上行链路间隔。
1221 +General system settings like: uplink interval.
1223 1223  )))
1224 1224  * (% _mstvisible="3" %)
1225 1225  (((
1226 1226  (% _msthash="903321" _msttexthash="1244334" _mstvisible="4" %)
1227 -LoRaWAN 协议和无线电相关命令。
1226 +LoRaWAN protocol & radio-related commands.
1228 1228  )))
1229 1229  
1230 1230  (% _mstvisible="1" %)
1231 1231  (((
1232 1232  (% _msthash="506251" _msttexthash="12349142" _mstvisible="2" style="text-align: left;" %)
1233 -对于所有支持 DLWS-005 LoRaWAN Stack（注~*~*）的 Dragino 设备，它们都是相同的。这些命令可以在 wiki 上找到：  [[End Device Downlink 命令>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1232 +They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
1234 1234  )))
1235 1235  
1236 1236  (% _mstvisible="1" %)
... ... @@ -1242,13 +1242,13 @@
1242 1242  (% _mstvisible="1" %)
1243 1243  (((
1244 1244  (% _mstvisible="2" style="text-align: left;" %)
1245 -(% _mstvisible="3" style="color:#4f81bd" %)*  (% _msthash="506054" _msttexthash="792038" %)**LHT65N的指令特殊设计**
1244 +(% _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506054" _msttexthash="792038" %)**Commands special design for LHT65N**
1246 1246  )))
1247 1247  
1248 1248  (% _mstvisible="1" %)
1249 1249  (((
1250 1250  (% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1251 -这些命令仅对 LHT65N 有效，如下：
1250 +These commands are only valid for LHT65N, as below:
1252 1252  
1253 1253  
1254 1254  (% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
... ... @@ -1256,13 +1256,13 @@
1256 1256  )))
1257 1257  
1258 1258  (% _mstvisible="1" style="text-align: left;" %)
1259 -== (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 设置发送间隔时间(%%) ==
1258 +== (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 Set Transmit Interval Time(%%) ==
1260 1260  
1261 1261  (% _msthash="315355" _msttexthash="1659268" _mstvisible="1" style="text-align: left;" %)
1262 -功能：更改 LoRaWAN 端节点传输间隔。
1261 +Feature: Change LoRaWAN End Node Transmit Interval.
1263 1263  
1264 1264  (% _mstvisible="1" style="text-align: left;" %)
1265 -(% _msthash="315244" _msttexthash="241696" style="color:#4f81bd" %)**AT指令：AT+TDC**
1264 +(% _msthash="315244" _msttexthash="241696" style="color:#4f81bd" %)**AT Command: AT+TDC**
1266 1266  
1267 1267  (% _mstvisible="1" %)
1268 1268  [[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
... ... @@ -1273,19 +1273,19 @@
1273 1273  
1274 1274  
1275 1275  (% _mstvisible="2" style="text-align: left;" %)
1276 -(% _msthash="506055" _msttexthash="381992" style="color:#4f81bd" %)**下行命令：0x01**
1275 +(% _msthash="506055" _msttexthash="381992" style="color:#4f81bd" %)**Downlink Command: 0x01**
1277 1277  )))
1278 1278  
1279 1279  (% _mstvisible="1" %)
1280 1280  (((
1281 1281  (% _msthash="506256" _msttexthash="1996592" _mstvisible="2" style="text-align: left;" %)
1282 -格式：命令代码 (0x01) 后跟 3 个字节的时间值。
1281 +Format: Command Code (0x01) followed by 3 bytes time value.
1283 1283  )))
1284 1284  
1285 1285  (% _mstvisible="1" %)
1286 1286  (((
1287 1287  (% _msthash="506257" _msttexthash="12934649" _mstvisible="2" style="text-align: left;" %)
1288 -如果下行payload=0100003C，表示设置END Node的Transmit Interval为0x00003C=60(S)，type code为01。
1287 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
1289 1289  )))
1290 1290  
1291 1291  (% _mstvisible="1" %)
... ... @@ -1292,12 +1292,12 @@
1292 1292  * (% _mstvisible="3" %)
1293 1293  (((
1294 1294  (% _msthash="903322" _msttexthash="3250546" _mstvisible="4" %)
1295 -(% _mstvisible="5" %)**示例 1**(%%)：下行链路有效负载：0100001E ~/~/ 设置传输间隔 (TDC) = 30 秒
1294 +(% _mstvisible="5" %)**Example 1**(%%): Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1296 1296  )))
1297 1297  * (% _mstvisible="3" %)
1298 1298  (((
1299 1299  (% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1300 -(% _mstvisible="5" %)**示例 2**(%%)：下行链路有效负载：0100003C ~/~/ 设置传输间隔 (TDC) = 60 秒
1299 +(% _mstvisible="5" %)**Example 2**(%%): Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1301 1301  
1302 1302  
1303 1303  (% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
... ... @@ -1305,13 +1305,13 @@
1305 1305  )))
1306 1306  
1307 1307  (% _mstvisible="1" style="text-align: left;" %)
1308 -== (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 设置外部传感器模式(%%) ==
1307 +== (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 Set External Sensor Mode(%%) ==
1309 1309  
1310 1310  (% _msthash="315357" _msttexthash="975117" _mstvisible="1" style="text-align: left;" %)
1311 -功能：更改外部传感器模式。
1310 +Feature: Change External Sensor Mode.
1312 1312  
1313 1313  (% _mstvisible="1" style="text-align: left;" %)
1314 -(% _msthash="315245" _msttexthash="248118" style="color:#4f81bd" %)**AT指令：AT+EXT**
1313 +(% _msthash="315245" _msttexthash="248118" style="color:#4f81bd" %)**AT Command: AT+EXT**
1315 1315  
1316 1316  (% _mstvisible="1" %)
1317 1317  [[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
... ... @@ -1322,19 +1322,19 @@
1322 1322  
1323 1323  
1324 1324  (% _mstvisible="2" style="text-align: left;" %)
1325 -(% _msthash="506056" _msttexthash="387855" style="color:#4f81bd" %)**下行命令：0xA2**
1324 +(% _msthash="506056" _msttexthash="387855" style="color:#4f81bd" %)**Downlink Command: 0xA2**
1326 1326  )))
1327 1327  
1328 1328  (% _mstvisible="1" %)
1329 1329  (((
1330 1330  (% _msthash="506259" _msttexthash="395629" _mstvisible="2" style="text-align: left;" %)
1331 -总字节数：2~~5字节
1330 +Total bytes: 2 ~~ 5 bytes
1332 1332  )))
1333 1333  
1334 1334  (% _mstvisible="1" %)
1335 1335  (((
1336 1336  (% _mstvisible="2" %)
1337 -(% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**例子：**
1336 +(% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**Example:**
1338 1338  )))
1339 1339  
1340 1340  (% _mstvisible="1" %)
... ... @@ -1341,17 +1341,17 @@
1341 1341  * (% _mstvisible="3" %)
1342 1342  (((
1343 1343  (% _msthash="903324" _msttexthash="934973" _mstvisible="4" %)
1344 -0xA201：将外部传感器类型设置为 E1
1343 +0xA201: Set external sensor type to E1
1345 1345  )))
1346 1346  * (% _mstvisible="3" %)
1347 1347  (((
1348 1348  (% _msthash="903325" _msttexthash="354770" _mstvisible="4" %)
1349 -0xA209: 同 AT+EXT=9
1348 +0xA209: Same as AT+EXT=9
1350 1350  )))
1351 1351  * (% _mstvisible="3" %)
1352 1352  (((
1353 1353  (% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1354 -0xA20702003c,同 AT+SETCNT=60
1353 +0xA20702003c,Same as AT+SETCNT=60
1355 1355  
1356 1356  
1357 1357  (% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
... ... @@ -1359,20 +1359,20 @@
1359 1359  )))
1360 1360  
1361 1361  (% _mstvisible="1" style="text-align: left;" %)
1362 -== (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 启用/禁用上行温度探测器 ID(%%) ==
1361 +== (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 Enable/Disable uplink Temperature probe ID(%%) ==
1363 1363  
1364 1364  (% _msthash="315359" _msttexthash="2977572" _mstvisible="1" style="text-align: left;" %)
1365 -功能：如果启用 PID，设备将发送温度探测器 ID：
1364 +Feature: If PID is enabled, device will send the temperature probe ID on:
1366 1366  
1367 1367  (% _mstvisible="1" %)
1368 -* OTAA 加入后的第一个数据包
1369 -* 自第一个数据包后每 24 小时。
1367 +* First Packet after OTAA Join
1368 +* Every 24 hours since the first packet.
1370 1370  
1371 1371  (% _msthash="315360" _msttexthash="658814" _mstvisible="1" style="text-align: left;" %)
1372 -PID 默认设置为禁用 (0)
1371 +PID is default set to disable (0)
1373 1373  
1374 1374  (% _mstvisible="1" style="text-align: left;" %)
1375 -(% _msthash="315246" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
1374 +(% _msthash="315246" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1376 1376  
1377 1377  (% _mstvisible="1" %)
1378 1378  [[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
... ... @@ -1379,20 +1379,20 @@
1379 1379  
1380 1380  
1381 1381  (% _mstvisible="1" style="text-align: left;" %)
1382 -(% _msthash="315247" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1381 +(% _msthash="315247" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1383 1383  
1384 1384  (% _mstvisible="1" %)
1385 -* 0xA800  **~-~->** AT+PID=0
1386 -* 0xA801     **~-~->** AT+PID=1
1384 +* 0xA800  **~-~->** AT+PID=0
1385 +* 0xA801     **~-~->** AT+PID=1
1387 1387  
1388 1388  (% _mstvisible="1" style="text-align: left;" %)
1389 -== (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 设置密码(%%) ==
1388 +== (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1390 1390  
1391 1391  (% _msthash="315363" _msttexthash="1170728" _mstvisible="1" style="text-align: left;" %)
1392 -功能：设置设备密码，最多9位
1391 +Feature: Set device password, max 9 digits
1393 1393  
1394 1394  (% _mstvisible="1" style="text-align: left;" %)
1395 -(% _msthash="315248" _msttexthash="295009" style="color:#4f81bd" %)**AT 命令：AT+PWORD**
1394 +(% _msthash="315248" _msttexthash="295009" style="color:#4f81bd" %)**AT Command: AT+PWORD**
1396 1396  
1397 1397  (% _mstvisible="1" %)
1398 1398  [[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
... ... @@ -1403,13 +1403,13 @@
1403 1403  
1404 1404  
1405 1405  (% _mstvisible="2" style="text-align: left;" %)
1406 -(% _msthash="506057" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1405 +(% _msthash="506057" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1407 1407  )))
1408 1408  
1409 1409  (% _mstvisible="1" %)
1410 1410  (((
1411 1411  (% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1412 -此功能没有下行链路命令。
1411 +No downlink command for this feature.
1413 1413  
1414 1414  (% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1415 1415  
... ... @@ -1416,13 +1416,13 @@
1416 1416  )))
1417 1417  
1418 1418  (% _mstvisible="1" style="text-align: left;" %)
1419 -== (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 退出 AT 命令(%%) ==
1418 +== (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 Quit AT Command(%%) ==
1420 1420  
1421 1421  (% _msthash="315365" _msttexthash="4616456" _mstvisible="1" style="text-align: left;" %)
1422 -特点：退出 AT 命令模式，用户在使用 AT 命令前需要再次输入密码。
1421 +Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
1423 1423  
1424 1424  (% _mstvisible="1" style="text-align: left;" %)
1425 -(% _msthash="315249" _msttexthash="289120" style="color:#4f81bd" %)**AT指令：AT+DISAT**
1424 +(% _msthash="315249" _msttexthash="289120" style="color:#4f81bd" %)**AT Command: AT+DISAT**
1426 1426  
1427 1427  (% _mstvisible="1" %)
1428 1428  [[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
... ... @@ -1429,41 +1429,41 @@
1429 1429  
1430 1430  
1431 1431  (% _mstvisible="1" style="text-align: left;" %)
1432 -(% _msthash="315250" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1431 +(% _msthash="315250" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1433 1433  
1434 1434  (% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
1435 -此功能没有下行链路命令。
1434 +No downlink command for this feature.
1436 1436  
1437 1437  
1438 1438  (% _mstvisible="1" style="text-align: left;" %)
1439 -== (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 设置为睡眠模式(%%) ==
1438 +== (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 Set to sleep mode(%%) ==
1440 1440  
1441 1441  (% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
1442 -功能：将设备设置为睡眠模式
1441 +Feature: Set device to sleep mode
1443 1443  
1444 -* AT+Sleep=0 : 正常工作模式，没有 LoRa 消息时设备会休眠并使用较低功率
1445 -* AT+Sleep=1 ：设备处于深度睡眠模式，没有发生 LoRa 激活，用于存储或运输。
1443 +* AT+Sleep=0  : Normal working mode, device will sleep and use lower power when there is no LoRa message
1444 +* AT+Sleep=1 : Device is in deep sleep mode, no LoRa activation happen, used for storage or shipping.
1446 1446  
1447 1447  (% _mstvisible="1" style="text-align: left;" %)
1448 -(% _msthash="315251" _msttexthash="289783" style="color:#4f81bd" %)**AT指令：AT+SLEEP**
1447 +(% _msthash="315251" _msttexthash="289783" style="color:#4f81bd" %)**AT Command: AT+SLEEP**
1449 1449  
1450 1450  (% _mstvisible="1" %)
1451 1451  [[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
1452 1452  
1453 1453  (% _mstvisible="1" %)
1454 -(% _msthash="315252" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1453 +(% _msthash="315252" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1455 1455  
1456 1456  (% _mstvisible="1" %)
1457 -* 没有设置为睡眠模式的下行链路命令。
1456 +* There is no downlink command to set to Sleep mode.
1458 1458  
1459 1459  (% _mstvisible="1" %)
1460 -== (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 设置系统时间(%%) ==
1459 +== (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1461 1461  
1462 1462  (% _msthash="315372" _msttexthash="2565524" _mstvisible="1" %)
1463 -特点：设置系统时间，unix格式。[[有关格式的详细信息，请参见此处。>>||anchor="H2.6.2UnixTimeStamp"]]
1462 +Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
1464 1464  
1465 1465  (% _mstvisible="1" %)
1466 -(% _msthash="315253" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
1465 +(% _msthash="315253" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1467 1467  
1468 1468  (% _mstvisible="1" %)
1469 1469  [[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
... ... @@ -1470,31 +1470,31 @@
1470 1470  
1471 1471  
1472 1472  (% _mstvisible="1" %)
1473 -(% _msthash="315254" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1472 +(% _msthash="315254" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1474 1474  
1475 1475  (% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
1476 -0x306007806000 ~/~/ 设置时间戳为0x(6007806000)，同AT+TIMESTAMP=1611104352
1475 +0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
1477 1477  
1478 1478  
1479 1479  (% _mstvisible="1" %)
1480 -== (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 设置时间同步模式(%%) ==
1479 +== (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 Set Time Sync Mode(%%) ==
1481 1481  
1482 1482  (% _mstvisible="1" %)
1483 1483  (((
1484 1484  (% _msthash="506263" _msttexthash="11748321" _mstvisible="2" %)
1485 -Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server必须支持v1.0.3协议才能回复这个命令。
1484 +Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
1486 1486  )))
1487 1487  
1488 1488  (% _mstvisible="1" %)
1489 1489  (((
1490 1490  (% _msthash="506264" _msttexthash="6530264" _mstvisible="2" %)
1491 -SYNCMOD 默认设置为 1。如果用户想设置与 LoRaWAN 服务器不同的时间，用户需要将其设置为 0。
1490 +SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
1492 1492  )))
1493 1493  
1494 1494  (% _mstvisible="1" %)
1495 1495  (((
1496 1496  (% _mstvisible="2" %)
1497 -(% _msthash="506058" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
1496 +(% _msthash="506058" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1498 1498  )))
1499 1499  
1500 1500  (% _mstvisible="1" %)
... ... @@ -1502,23 +1502,23 @@
1502 1502  
1503 1503  
1504 1504  (% _mstvisible="1" %)
1505 -(% _msthash="315255" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1504 +(% _msthash="315255" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1506 1506  
1507 1507  (% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
1508 -0x28 01 ~/~/ 同 AT+SYNCMOD=1
1507 +0x28 01 ~/~/ Same As AT+SYNCMOD=1
1509 1509  
1510 1510  (% _msthash="315378" _msttexthash="479076" _mstvisible="1" %)
1511 -0x28 00 ~/~/ 同 AT+SYNCMOD=0
1510 +0x28 00 ~/~/ Same As AT+SYNCMOD=0
1512 1512  
1513 1513  
1514 1514  (% _mstvisible="1" %)
1515 -== (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 设置时间同步间隔(%%) ==
1514 +== (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 Set Time Sync Interval(%%) ==
1516 1516  
1517 1517  (% _msthash="315379" _msttexthash="3065777" _mstvisible="1" %)
1518 -功能：定义系统时间同步间隔。SYNCTDC 默认值：10 天。
1517 +Feature: Define System time sync interval. SYNCTDC default value: 10 days.
1519 1519  
1520 1520  (% _mstvisible="1" %)
1521 -(% _msthash="315256" _msttexthash="137488" style="color:#4f81bd" %)**AT 命令：**
1520 +(% _msthash="315256" _msttexthash="137488" style="color:#4f81bd" %)**AT Command:**
1522 1522  
1523 1523  (% _mstvisible="1" %)
1524 1524  [[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
... ... @@ -1525,20 +1525,20 @@
1525 1525  
1526 1526  
1527 1527  (% _mstvisible="1" %)
1528 -(% _msthash="315257" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1527 +(% _msthash="315257" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1529 1529  
1530 1530  (% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
1531 -0x29 0A ~/~/ 同 AT+SYNCTDC=0x0A
1530 +0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
1532 1532  
1533 1533  
1534 1534  (% _mstvisible="1" %)
1535 -== (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 基于页面打印数据条目。(%%) ==
1534 +== (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 Print data entries base on page.(%%) ==
1536 1536  
1537 1537  (% _msthash="315383" _msttexthash="3233334" _mstvisible="1" %)
1538 -功能：打印从起始页到终止页的扇区数据（最大为 416 页）。
1537 +Feature: Print the sector data from start page to stop page (max is 416 pages).
1539 1539  
1540 1540  (% _mstvisible="1" %)
1541 -(% _msthash="315258" _msttexthash="264953" style="color:#4f81bd" %)**AT指令：AT+PDTA**
1540 +(% _msthash="315258" _msttexthash="264953" style="color:#4f81bd" %)**AT Command: AT+PDTA**
1542 1542  
1543 1543  (% _mstvisible="1" %)
1544 1544  [[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
... ... @@ -1545,20 +1545,20 @@
1545 1545  
1546 1546  
1547 1547  (% _mstvisible="1" %)
1548 -(% _msthash="315259" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1547 +(% _msthash="315259" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1549 1549  
1550 1550  (% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
1551 -功能没有下行链路命令
1550 +No downlink commands for feature
1552 1552  
1553 1553  
1554 1554  (% _mstvisible="1" %)
1555 -== (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 打印最后几个数据条目。(%%) ==
1554 +== (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 Print last few data entries.(%%) ==
1556 1556  
1557 1557  (% _msthash="315387" _msttexthash="1101009" _mstvisible="1" %)
1558 -功能：打印最后几个数据条目
1557 +Feature: Print the last few data entries
1559 1559  
1560 1560  (% _mstvisible="1" %)
1561 -(% _msthash="315260" _msttexthash="288522" style="color:#4f81bd" %)**AT指令：AT+PLDTA**
1560 +(% _msthash="315260" _msttexthash="288522" style="color:#4f81bd" %)**AT Command: AT+PLDTA**
1562 1562  
1563 1563  (% _mstvisible="1" %)
1564 1564  [[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
... ... @@ -1565,20 +1565,20 @@
1565 1565  
1566 1566  
1567 1567  (% _mstvisible="1" %)
1568 -(% _msthash="315261" _msttexthash="298038" style="color:#4f81bd" %)**下行命令：**
1567 +(% _msthash="315261" _msttexthash="298038" style="color:#4f81bd" %)**Downlink Command:**
1569 1569  
1570 1570  (% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
1571 -功能没有下行链路命令
1570 +No downlink commands for feature
1572 1572  
1573 1573  
1574 1574  (% _mstvisible="1" %)
1575 -== (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 清除闪存记录(%%) ==
1574 +== (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 Clear Flash Record(%%) ==
1576 1576  
1577 1577  (% _msthash="315391" _msttexthash="1609075" _mstvisible="1" %)
1578 -功能：清除闪存数据记录功能。
1577 +Feature: Clear flash storage for data log feature.
1579 1579  
1580 1580  (% _mstvisible="1" %)
1581 -(% _msthash="315262" _msttexthash="311415" style="color:#4f81bd" %)**AT指令：AT+CLRDTA**
1580 +(% _msthash="315262" _msttexthash="311415" style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
1582 1582  
1583 1583  (% _mstvisible="1" %)
1584 1584  [[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
... ... @@ -1585,47 +1585,47 @@
1585 1585  
1586 1586  
1587 1587  (% _mstvisible="1" %)
1588 -(% _msthash="315263" _msttexthash="388193" style="color:#4f81bd" %)**下行命令：0xA3**
1587 +(% _msthash="315263" _msttexthash="388193" style="color:#4f81bd" %)**Downlink Command: 0xA3**
1589 1589  
1590 1590  (% _mstvisible="1" %)
1591 -* 示例：0xA301 ~/~/同 AT+CLRDTA
1590 +* Example: 0xA301 ~/~/Same as AT+CLRDTA
1592 1592  
1593 1593  (% _mstvisible="1" %)
1594 -== (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 自动发送 None-ACK 消息(%%) ==
1593 +== (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1595 1595  
1596 1596  (% _msthash="315394" _msttexthash="51837149" _mstvisible="1" %)
1597 -特点：LHT65N每次上行都会等待ACK，如果LHT65N没有收到IoT服务器的ACK，则认为消息没有到达服务器并存储。LHT65N 定期发送消息正常。一旦 LHT65N 从服务器收到 ACK，它会认为网络正常并开始发送未到达消息。
1596 +Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
1598 1598  
1599 1599  
1600 1600  (% _mstvisible="1" %)
1601 -(% _msthash="315264" _msttexthash="334256" style="color:#4f81bd" %)**AT 命令：AT+PNACKMD**
1600 +(% _msthash="315264" _msttexthash="334256" style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1602 1602  
1603 1603  (% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1604 -默认出厂设置为 0
1603 +The default factory setting is 0
1605 1605  
1606 1606  (% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1607 -(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**命令示例**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**功能**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**回复**
1608 -(% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)轮询无 ACK 消息|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)好的
1606 +(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**Command Example**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**Function**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**Response**
1607 +(% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1609 1609  
1610 1610  (% _mstvisible="1" %)
1611 -(% _msthash="315265" _msttexthash="383981" style="color:#4f81bd" %)**下行命令：0x34**
1610 +(% _msthash="315265" _msttexthash="383981" style="color:#4f81bd" %)**Downlink Command: 0x34**
1612 1612  
1613 1613  (% _mstvisible="1" %)
1614 -* 示例：0x3401 ~/~/同 AT+PNACKMD=1
1613 +* Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1615 1615  
1616 1616  (% _mstvisible="1" %)
1617 -= (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. 电池及更换方法(%%) =
1616 += (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1618 1618  
1619 1619  (% _mstvisible="1" %)
1620 -== (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 电池类型(%%) ==
1619 +== (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 Battery Type(%%) ==
1621 1621  
1622 1622  (% _msthash="315398" _msttexthash="33754799" _mstvisible="1" %)
1623 -LHT65N 配备 2400mAH Li-MnO2 (CR17505) 电池。该电池是一种不可充电电池，具有低放电率，可使用长达 8~~10 年。这种类型的电池通常用于物联网设备中以进行长期运行，例如水表。
1622 +LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1624 1624  
1625 1625  (% _mstvisible="1" %)
1626 1626  (((
1627 1627  (% _mstvisible="2" %)
1628 -放电曲线不是线性的，所以不能简单地用百分比来表示电池电量。下面是电池性能。
1627 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1629 1629  [[image:image-20220515075034-1.png||_mstalt="428961" _mstvisible="4" height="208" width="644"]]
1630 1630  )))
1631 1631  
... ... @@ -1632,25 +1632,21 @@
1632 1632  (% _mstvisible="1" %)
1633 1633  (((
1634 1634  (% _mstvisible="2" %)
1635 -LHT65N 的最低工作电压约为 2.5v。当电池低于 2.6v 时，是时候更换电池了。
1634 +The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1636 1636  
1637 -
1638 -(% _mstvisible="2" %)
1639 -
1640 1640  )))
1641 1641  
1642 1642  (% _mstvisible="1" %)
1643 -== (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 更换电池(%%) ==
1639 +== (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 Replace Battery(%%) ==
1644 1644  
1645 1645  (% _msthash="315399" _msttexthash="11289278" _mstvisible="1" %)
1646 -LHT65N背面有两颗螺丝，拧下，更换里面的电池就OK了。电池为通用CR17450电池。任何品牌都应该没问题。
1642 +LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
1647 1647  
1648 1648  (% _mstvisible="1" %)
1649 1649  [[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1650 1650  
1651 -
1652 1652  (% _mstvisible="1" %)
1653 -== (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 电池寿命分析(%%) ==
1648 +== (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1654 1654  
1655 1655  (% _mstvisible="1" %)
1656 1656  (((
... ... @@ -1657,8 +1657,8 @@
1657 1657  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1658 1658  (((
1659 1659  (% _msthash="736723" _msttexthash="35479028" %)
1660 -Dragino 电池供电产品均以低功耗模式运行。用户可以从此链接查看指南以计算估计的电池寿命：
1661 -[[https :~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1655 +Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1656 +[[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1662 1662  )))
1663 1663  
1664 1664  (((
... ... @@ -1667,44 +1667,44 @@
1667 1667  
1668 1668  (((
1669 1669  (% _msthash="736724" _msttexthash="12045098" %)
1670 -LHT65N 不同频率的完整详细测试报告可在以下网址找到：[[https :~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1665 +A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1671 1671  )))
1672 1672  
1673 1673  
1674 1674  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1675 -= (% _msthash="183170" _msttexthash="37921" _mstvisible="3" %)6. 常见问题(%%) =
1670 += (% _msthash="183170" _msttexthash="37921" _mstvisible="3" %)6. FAQ(%%) =
1676 1676  
1677 1677  (% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1678 -== (% _msthash="491075" _msttexthash="437463" %)6.1 如何使用 AT 命令？(%%) ==
1673 +== (% _msthash="491075" _msttexthash="437463" %)6.1 How to use AT Command?(%%) ==
1679 1679  
1680 1680  (((
1681 1681  (% _msthash="736725" _msttexthash="9345674" %)
1682 -LHT65N 支持 AT 命令集。用户可以使用 USB 转 TTL 适配器和程序线连接到 LHT65 使用 AT 命令，如下所示。
1677 +LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1683 1683  )))
1684 1684  
1685 1685  [[image:image-20220530085651-1.png||_mstalt="429949"]]
1686 1686  
1687 1687  
1688 -(% _msthash="506061" _msttexthash="170755" %)**联系：**
1683 +(% _msthash="506061" _msttexthash="170755" %)**Connection:**
1689 1689  
1690 1690  (% _msthash="506062" _msttexthash="1187732" %)
1691 -✓ ** USB 转 TTL GND <~-~->GND**
1686 +✓** USB to TTL GND <~-~->GND**
1692 1692  
1693 -(% _msthash="506063" _msttexthash="1158313" %)**✓ USB 转 TTL RXD <~-~-> D+**
1688 +(% _msthash="506063" _msttexthash="1158313" %)**✓ USB to TTL RXD <~-~-> D+**
1694 1694  
1695 -(% _msthash="506064" _msttexthash="1175629" %)**✓ USB 转 TTL TXD <~-~-> A11**
1690 +(% _msthash="506064" _msttexthash="1175629" %)**✓ USB to TTL TXD <~-~-> A11**
1696 1696  
1697 -(% _msthash="506065" _msttexthash="1164696" %)**✓ USB 转 TTL 3.3V <~-~-> D-**
1692 +(% _msthash="506065" _msttexthash="1164696" %)**✓ USB to TTL 3.3V <~-~-> D-**
1698 1698  
1699 1699  
1700 1700  (((
1701 1701  (% _msthash="736726" _msttexthash="67213055" %)
1702 -在 PC 端，用户需要将串口工具（如**putty**、SecureCRT）波特率设置为**9600**才能访问 LHT65N 的串口控制台。AT 指令默认关闭，需要输入密码（默认：**123456**）才能激活。输入 AT 命令的超时时间为 5 分钟，5 分钟后，用户需要再次输入密码。用户可以使用 AT+DSAT 命令在超时前禁用 AT 命令。
1697 +In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1703 1703  )))
1704 1704  
1705 1705  (((
1706 1706  (% _msthash="736727" _msttexthash="1907009" %)
1707 -输入密码和ATZ激活LHT65N，如下图：
1702 +Input password and ATZ to activate LHT65N,As shown below:
1708 1708  )))
1709 1709  
1710 1710  [[image:image-20220530095701-4.png||_mstalt="430014"]]
... ... @@ -1711,223 +1711,223 @@
1711 1711  
1712 1712  
1713 1713  (% _msthash="506066" _msttexthash="544869" %)
1714 -AT 命令列表如下：
1709 +AT Command List is as below:
1715 1715  
1716 1716  (% _msthash="506067" _msttexthash="361920" %)
1717 -AT+<CMD>? : 关于 <CMD> 的帮助
1712 +AT+<CMD>? :  Help on <CMD>
1718 1718  
1719 1719  (% _msthash="506068" _msttexthash="243061" %)
1720 -AT+<CMD> : 运行 <CMD>
1715 +AT+<CMD> :  Run <CMD>
1721 1721  
1722 1722  (% _msthash="506069" _msttexthash="704197" %)
1723 -AT+<CMD>=<value> : 设置值
1718 +AT+<CMD>=<value> :  Set the value
1724 1724  
1725 1725  (% _msthash="506070" _msttexthash="455676" %)
1726 -AT+<CMD>=? : 获取值
1721 +AT+<CMD>=? :  Get the value
1727 1727  
1728 1728  (% _msthash="506071" _msttexthash="670553" %)
1729 -AT+DEBUG：设置更多信息输出
1724 +AT+DEBUG:  Set more info output
1730 1730  
1731 1731  (% _msthash="506072" _msttexthash="485888" %)
1732 -ATZ：触发 MCU 复位
1727 +ATZ:  Trig a reset of the MCU
1733 1733  
1734 1734  (% _msthash="506073" _msttexthash="2068872" %)
1735 -AT+FDR：将参数重置为出厂默认值，按键保留
1730 +AT+FDR:  Reset Parameters to Factory Default, Keys Reserve
1736 1736  
1737 1737  (% _msthash="506074" _msttexthash="689169" %)
1738 -AT+DEUI：获取或设置设备 EUI
1733 +AT+DEUI:  Get or Set the Device EUI
1739 1739  
1740 1740  (% _msthash="506075" _msttexthash="960414" %)
1741 -AT+DADDR：获取或设置设备地址
1736 +AT+DADDR:  Get or Set the Device Address
1742 1742  
1743 1743  (% _msthash="506076" _msttexthash="1079897" %)
1744 -AT+APPKEY：获取或设置应用密钥
1739 +AT+APPKEY:  Get or Set the Application Key
1745 1745  
1746 1746  (% _msthash="506077" _msttexthash="1326143" %)
1747 -AT+NWKSKEY：获取或设置网络会话密钥
1742 +AT+NWKSKEY:  Get or Set the Network Session Key
1748 1748  
1749 1749  (% _msthash="506078" _msttexthash="1573000" %)
1750 -AT+APPSKEY：获取或设置应用会话密钥
1745 +AT+APPSKEY:  Get or Set the Application Session Key
1751 1751  
1752 1752  (% _msthash="506079" _msttexthash="1041729" %)
1753 -AT+APPEUI：获取或设置应用程序 EUI
1748 +AT+APPEUI:  Get or Set the Application EUI
1754 1754  
1755 1755  (% _msthash="506080" _msttexthash="2104206" %)
1756 -AT+ADR：获取或设置自适应数据速率设置。（0：关闭，1：开启）
1751 +AT+ADR:  Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1757 1757  
1758 1758  (% _msthash="506081" _msttexthash="3369288" %)
1759 -AT+TXP：获取或设置发射功率（0-5, MAX:0, MIN:5, 根据 LoRaWAN Spec）
1754 +AT+TXP:  Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1760 1760  
1761 1761  (% _msthash="506082" _msttexthash="1894529" %)
1762 -AT+DR：获取或设置数据速率。（0-7对应DR_X）
1757 +AT+DR:  Get or Set the Data Rate. (0-7 corresponding to DR_X)
1763 1763  
1764 1764  (% _msthash="506083" _msttexthash="3864172" %)
1765 -AT+DCS：获取或设置 ETSI 占空比设置 - 0=禁用，1=启用 - 仅用于测试
1760 +AT+DCS:  Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1766 1766  
1767 1767  (% _msthash="506084" _msttexthash="1712204" %)
1768 -AT+PNM：获取或设置公网模式。（0：关闭，1：开启）
1763 +AT+PNM:  Get or Set the public network mode. (0: off, 1: on)
1769 1769  
1770 1770  (% _msthash="506085" _msttexthash="1281202" %)
1771 -AT+RX2FQ：获取或设置 Rx2 窗口频率
1766 +AT+RX2FQ:  Get or Set the Rx2 window frequency
1772 1772  
1773 1773  (% _msthash="506086" _msttexthash="2796781" %)
1774 -AT+RX2DR：获取或设置 Rx2 窗口数据速率（0-7 对应 DR_X）
1769 +AT+RX2DR:  Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1775 1775  
1776 1776  (% _msthash="506087" _msttexthash="3285165" %)
1777 -AT+RX1DL：获取或设置 Tx 结束与 Rx Window 1 之间的延迟，单位为 ms
1772 +AT+RX1DL:  Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1778 1778  
1779 1779  (% _msthash="506088" _msttexthash="3286179" %)
1780 -AT+RX2DL：获取或设置 Tx 结束与 Rx Window 2 之间的延迟，单位为 ms
1775 +AT+RX2DL:  Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1781 1781  
1782 1782  (% _msthash="506089" _msttexthash="4703803" %)
1783 -AT+JN1DL：获取或设置 Tx 结束和加入 Rx 窗口 1 之间的加入接受延迟，单位为 ms
1778 +AT+JN1DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1784 1784  
1785 1785  (% _msthash="506090" _msttexthash="4704999" %)
1786 -AT+JN2DL：获取或设置 Tx 结束与加入 Rx 窗口 2 之间的加入接受延迟，单位为 ms
1781 +AT+JN2DL:  Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1787 1787  
1788 1788  (% _msthash="506091" _msttexthash="1528683" %)
1789 -AT+NJM：获取或设置网络加入模式。（0：ABP，1：OTAA）
1784 +AT+NJM:  Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1790 1790  
1791 1791  (% _msthash="506092" _msttexthash="757185" %)
1792 -AT+NWKID：获取或设置网络 ID
1787 +AT+NWKID:  Get or Set the Network ID
1793 1793  
1794 1794  (% _msthash="506093" _msttexthash="1156597" %)
1795 -AT+FCU：获取或设置上行帧计数器
1790 +AT+FCU:  Get or Set the Frame Counter Uplink
1796 1796  
1797 1797  (% _msthash="506094" _msttexthash="1273987" %)
1798 -AT+FCD：获取或设置帧计数器下行
1793 +AT+FCD:  Get or Set the Frame Counter Downlink
1799 1799  
1800 1800  (% _msthash="506095" _msttexthash="859222" %)
1801 -AT+CLASS：获取或设置设备类
1796 +AT+CLASS:  Get or Set the Device Class
1802 1802  
1803 1803  (% _msthash="506096" _msttexthash="384852" %)
1804 -AT+JOIN：加入网络
1799 +AT+JOIN:  Join network
1805 1805  
1806 1806  (% _msthash="506097" _msttexthash="548626" %)
1807 -AT+NJS：获取加入状态
1802 +AT+NJS:  Get the join status
1808 1808  
1809 1809  (% _msthash="506098" _msttexthash="2546206" %)
1810 -AT+SENDB：随应用端口发送十六进制数据
1805 +AT+SENDB:  Send hexadecimal data along with the application port
1811 1811  
1812 1812  (% _msthash="506099" _msttexthash="1932307" %)
1813 -AT+SEND：随应用端口发送文本数据
1808 +AT+SEND:  Send text data along with the application port
1814 1814  
1815 1815  (% _msthash="506100" _msttexthash="3560557" %)
1816 -AT+RECVB：以二进制格式打印最后接收到的数据（带十六进制值）
1811 +AT+RECVB:  Print last received data in binary format (with hexadecimal values)
1817 1817  
1818 1818  (% _msthash="506101" _msttexthash="1429701" %)
1819 -AT+RECV：以原始格式打印最后接收到的数据
1814 +AT+RECV:  Print last received data in raw format
1820 1820  
1821 1821  (% _msthash="506102" _msttexthash="1735981" %)
1822 -AT+VER：获取当前镜像版本和频段
1817 +AT+VER:  Get current image version and Frequency Band
1823 1823  
1824 1824  (% _msthash="506103" _msttexthash="1189474" %)
1825 -AT+CFM：获取或设置确认模式（0-1）
1820 +AT+CFM:  Get or Set the confirmation mode (0-1)
1826 1826  
1827 1827  (% _msthash="506104" _msttexthash="1718210" %)
1828 -AT+CFS：获取最后一次AT+SEND的确认状态（0-1）
1823 +AT+CFS:  Get confirmation status of the last AT+SEND (0-1)
1829 1829  
1830 1830  (% _msthash="506105" _msttexthash="1339403" %)
1831 -AT+SNR：获取最后收到的数据包的信噪比
1826 +AT+SNR:  Get the SNR of the last received packet
1832 1832  
1833 1833  (% _msthash="506106" _msttexthash="1452009" %)
1834 -AT+RSSI：获取最后收到的数据包的RSSI
1829 +AT+RSSI:  Get the RSSI of the last received packet
1835 1835  
1836 1836  (% _msthash="506107" _msttexthash="2768142" %)
1837 -AT+TDC：获取或设置应用数据传输间隔，单位为ms
1832 +AT+TDC:  Get or set the application data transmission interval in ms
1838 1838  
1839 1839  (% _msthash="506108" _msttexthash="1083914" %)
1840 -AT+PORT：获取或设置应用端口
1835 +AT+PORT:  Get or set the application port
1841 1841  
1842 1842  (% _msthash="506109" _msttexthash="622440" %)
1843 -AT+DISAT：禁用 AT 指令
1838 +AT+DISAT:  Disable AT commands
1844 1844  
1845 1845  (% _msthash="506110" _msttexthash="868361" %)
1846 -AT+PWORD：设置密码，最多9位
1841 +AT+PWORD:  Set password, max 9 digits
1847 1847  
1848 1848  (% _msthash="506111" _msttexthash="2210299" %)
1849 -AT+CHS：获取或设置单通道模式的频率（单位：Hz）
1844 +AT+CHS:  Get or Set Frequency (Unit: Hz) for Single Channel Mode
1850 1850  
1851 1851  (% _msthash="506112" _msttexthash="2113462" %)
1852 -AT+CHE：获取或设置八通道模式，仅适用于US915、AU915、CN470
1847 +AT+CHE:  Get or Set eight channels mode,Only for US915,AU915,CN470
1853 1853  
1854 1854  (% _msthash="506113" _msttexthash="2087423" %)
1855 -AT+PDTA：打印起始页到终止页的扇区数据
1850 +AT+PDTA:  Print the sector data from start page to stop page
1856 1856  
1857 1857  (% _msthash="506114" _msttexthash="1063127" %)
1858 -AT+PLDTA：打印最后几组数据
1853 +AT+PLDTA:  Print the last few sets of data
1859 1859  
1860 1860  (% _msthash="506115" _msttexthash="1999426" %)
1861 -AT+CLRDTA：清除存储，记录位置回到第一个
1856 +AT+CLRDTA:  Clear the storage, record position back to 1st
1862 1862  
1863 1863  (% _msthash="506116" _msttexthash="442130" %)
1864 -AT+SLEEP：设置睡眠模式
1859 +AT+SLEEP:  Set sleep mode
1865 1865  
1866 1866  (% _msthash="506117" _msttexthash="1080222" %)
1867 -AT+EXT：获取或设置外部传感器型号
1862 +AT+EXT:  Get or Set external sensor model
1868 1868  
1869 1869  (% _msthash="506118" _msttexthash="1309490" %)
1870 -AT+BAT：获取当前电池电压，单位为mV
1865 +AT+BAT:  Get the current battery voltage in mV
1871 1871  
1872 1872  (% _msthash="506119" _msttexthash="813891" %)
1873 -AT+CFG：打印所有配置
1868 +AT+CFG:  Print all configurations
1874 1874  
1875 1875  (% _msthash="506120" _msttexthash="551707" %)
1876 -AT+WMOD：获取或设置工作模式
1871 +AT+WMOD:  Get or Set Work Mode
1877 1877  
1878 1878  (% _msthash="506121" _msttexthash="2631499" %)
1879 -AT+ARTEMP：获取或设置内部温度传感器报警范围
1874 +AT+ARTEMP:  Get or set the internal Temperature sensor alarm range
1880 1880  
1881 1881  (% _msthash="506122" _msttexthash="3907150" %)
1882 -AT+CITEMP：获取或设置内部温度传感器采集间隔，单位为 min
1877 +AT+CITEMP:  Get or set the internal Temperature sensor collection interval in min
1883 1883  
1884 1884  (% _msthash="506123" _msttexthash="854620" %)
1885 -AT+SETCNT：设置当前计数
1880 +AT+SETCNT:  Set the count at present
1886 1886  
1887 1887  (% _msthash="506124" _msttexthash="2554877" %)
1888 -AT+RJTDC：获取或设置 ReJoin 数据传输间隔，单位为 min
1883 +AT+RJTDC:  Get or set the ReJoin data transmission interval in min
1889 1889  
1890 1890  (% _msthash="506125" _msttexthash="771849" %)
1891 -AT+RPL：获取或设置响应级别
1886 +AT+RPL:  Get or set response level
1892 1892  
1893 1893  (% _msthash="506126" _msttexthash="1484314" %)
1894 -AT+TIMESTAMP：以秒为单位获取或设置 UNIX 时间戳
1889 +AT+TIMESTAMP:  Get or Set UNIX timestamp in second
1895 1895  
1896 1896  (% _msthash="506127" _msttexthash="741728" %)
1897 -AT+LEAPSEC：获取或设置闰秒
1892 +AT+LEAPSEC:  Get or Set Leap Second
1898 1898  
1899 1899  (% _msthash="506128" _msttexthash="1694017" %)
1900 -AT+SYNCMOD：获取或设置时间同步方式
1895 +AT+SYNCMOD:  Get or Set time synchronization method
1901 1901  
1902 1902  (% _msthash="506129" _msttexthash="2235948" %)
1903 -AT+SYNCTDC：获取或设置时间同步间隔，以天为单位
1898 +AT+SYNCTDC:  Get or set time synchronization interval in day
1904 1904  
1905 1905  (% _msthash="506130" _msttexthash="425542" %)
1906 -AT+PID：获取或设置PID
1901 +AT+PID:  Get or set the PID
1907 1907  
1908 1908  
1909 -== (% _msthash="1616654" _msttexthash="1555359" %)6.2 AT 命令和下行命令在哪里使用(%%) ==
1904 +== (% _msthash="1616654" _msttexthash="1555359" %)6.2 Where to use AT commands and Downlink commands(%%) ==
1910 1910  
1911 1911  (% _msthash="506131" _msttexthash="14585714" %)
1912 -AT指令：
1907 +AT commands：
1913 1913  
1914 1914  [[image:image-20220615092034-1.png||_mstalt="428870"]]
1915 1915  
1916 1916  (% _msthash="506132" _msttexthash="337922" %)
1917 -下行命令：
1912 +Downlink commands:
1918 1918  
1919 1919  (% _msthash="506133" _msttexthash="33046" %)
1920 -电讯网：
1915 +TTN:
1921 1921  
1922 1922  [[image:image-20220615092124-2.png||_mstalt="429221" height="843" width="893"]]
1923 1923  
1924 1924  (% _msthash="506134" _msttexthash="11113791" %)
1925 -氦：
1920 +Helium：
1926 1926  
1927 1927  [[image:image-20220615092551-3.png||_mstalt="430794" height="556" width="1097"]]
1928 1928  
1929 1929  (% _msthash="506135" _msttexthash="4159844" %)
1930 -Chirpstack：接入网络后才会显示下行窗口
1925 +Chirpstack:The downlink window will not be displayed until the network is accessed
1931 1931  
1932 1932  [[image:image-20220615094850-6.png||_mstalt="433082"]]
1933 1933  
... ... @@ -1934,38 +1934,38 @@
1934 1934  [[image:image-20220615094904-7.png||_mstalt="433485" height="329" width="1067"]]
1935 1935  
1936 1936  (% _msthash="506136" _msttexthash="39286" %)
1937 -AWS：
1932 +Aws:
1938 1938  
1939 1939  [[image:image-20220615092939-4.png||_mstalt="434460" height="532" width="1062"]]
1940 1940  
1941 -== (% _msthash="1220570" _msttexthash="33199257" %)6.3 如何更改上行间隔？(%%) ==
1936 +== (% _msthash="1220570" _msttexthash="33199257" %)6.3 How to change the uplink interval？(%%) ==
1942 1942  
1943 1943  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20set%20the%20transmit%20time%20interval/||_msthash="506137" _msttexthash="5712018"]]
1944 1944  
1945 1945  (% _msthash="536757" _msttexthash="1874951" %)
1946 -== 6.4 如何使用TTL-USB 连接PC 输入AT 指令？ ==
1941 +== 6.4 How to use TTL-USB to connect a PC to input AT commands? ==
1947 1947  
1948 1948  [[image:image-20220615153355-1.png]]
1949 1949  
1950 1950  (% _msthash="506138" _msttexthash="243997" %)
1951 -1 < - -> 接地 < - -> 黑色
1946 +1 < - -> GND  < - ->  Black
1952 1952  
1953 1953  (% _msthash="506139" _msttexthash="257166" %)
1954 -5 < - -> RXD < - -> 白色
1949 +5 < - ->  RXD  < - ->  White
1955 1955  
1956 1956  (% _msthash="506140" _msttexthash="253799" %)
1957 -9 < - -> TXD < - -> 绿色
1952 +9 < - ->  TXD  < - ->  Green
1958 1958  
1959 1959  [[image:image-20220615153914-2.jpeg||height="608" width="456"]]
1960 1960  
1961 1961  (((
1962 1962  (% _msthash="736728" _msttexthash="67213055" %)
1963 -在 PC 端，用户需要将串口工具（如**putty**、SecureCRT）波特率设置为**9600**才能访问 LHT65N 的串口控制台。AT 指令默认关闭，需要输入密码（默认：**123456**）才能激活。输入 AT 命令的超时时间为 5 分钟，5 分钟后，用户需要再次输入密码。用户可以使用 AT+DSAT 命令在超时前禁用 AT 命令。
1958 +In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1964 1964  )))
1965 1965  
1966 1966  (((
1967 1967  (% _msthash="736729" _msttexthash="1907009" %)
1968 -输入密码和ATZ激活LHT65N，如下图：
1963 +Input password and ATZ to activate LHT65N,As shown below:
1969 1969  
1970 1970  [[image:image-20220615154519-3.png]]
1971 1971  
... ... @@ -1973,60 +1973,55 @@
1973 1973  )))
1974 1974  
1975 1975  (% _msthash="536758" _msttexthash="1832428" %)
1976 -== 6.5 如何使用TTL-USB 连接PC 升级固件？ ==
1971 +== 6.5 How to use TTL-USB to connect PC to upgrade firmware? ==
1977 1977  
1978 1978  [[image:image-20220615153355-1.png]]
1979 1979  
1980 1980  (% _msthash="506141" _msttexthash="231309" %)
1981 -4 < - -> 3.3V < - -> 蓝色
1976 +4  < - ->  3.3V  < - ->  Blue
1982 1982  
1983 1983  (% _msthash="506142" _msttexthash="257166" %)
1984 -5 < - -> RXD < - -> 白色
1979 +5 < - ->  RXD  < - ->  White
1985 1985  
1986 1986  (% _msthash="506143" _msttexthash="253799" %)
1987 -9 < - -> TXD < - -> 绿色
1982 +9 < - ->  TXD  < - ->  Green
1988 1988  
1989 -连接好后使用，地线（1 < - -> GND < - -> Black）1s后拔出，重启设备。
1984 +Use after connection， ground wire（1 < - -> GND  < - ->  Black） for 1s and then pull it out.Then restart the device.
1990 1990  
1991 1991  
1992 -(% _mstmutation="1" %)**Step1**(%%) : 首先安装 TremoProgrammer。
1987 +(% _mstmutation="1" %)**Step1**(%%): Install TremoProgrammer  first.
1993 1993  
1994 1994  [[image:image-20220615170542-5.png]]
1995 1995  
1996 1996  
1997 1997  (% _msthash="506146" _msttexthash="52173160" %)
1998 -(% _istranslated="1" %)**Step2**(%%)：下载LHT65N镜像文件。
1993 +(% _istranslated="1" %)**步骤2**(%%)：下载LHT65N映像文件。
1999 1999  
2000 2000  
2001 2001  (% _msthash="506147" _msttexthash="188083584" %)
2002 -(% _istranslated="1" %)**Step3：**(%%)选择设备的串口和波特率以及要升级的固件。
1997 +(% _istranslated="1" %)**第3步：**(%%)选择设备的串行端口和波特率以及需要升级的固件。
2003 2003  
2004 2004  [[image:image-20220615171334-6.png]]
2005 2005  
2006 2006  
2007 -(% _istranslated="1" _mstmutation="1" %)**Step4：**(%%)点击开始
2002 +(% _istranslated="1" _mstmutation="1" %)**第 4 步：**(%%)单击“开始”
2008 2008  
2009 -
2010 -== 6.6 HT65N一次可以存储多少条数据？ ==
2011 -
2012 -3328
2013 -
2014 2014  
2015 2015  )))
2016 2016  
2017 2017  (% _mstvisible="1" %)
2018 -= (% _msthash="183170" _msttexthash="13740740" _mstvisible="3" %)7. (%%)订单信息 =
2008 += (% _msthash="183170" _msttexthash="13740740" _mstvisible="3" %)7. 订单信息(%%) =
2019 2019  
2020 2020  (% _mstvisible="1" %)
2021 2021  (((
2022 2022  (% _msthash="506267" _msttexthash="432432" _mstvisible="2" %)
2023 -零件编号：(% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
2013 +Part Number: (% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
2024 2024  )))
2025 2025  
2026 2026  (% _mstvisible="1" %)
2027 2027  (((
2028 2028  (% _msthash="506268" _msttexthash="686946" _mstvisible="2" %)
2029 -(% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%) : 默认频段
2019 +(% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%): The default frequency band
2030 2030  )))
2031 2031  
2032 2032  (% _mstvisible="1" %)
... ... @@ -2033,48 +2033,48 @@
2033 2033  * (% _mstvisible="3" %)
2034 2034  (((
2035 2035  (% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
2036 -(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%) : LoRaWAN AS923 频段
2026 +(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
2037 2037  )))
2038 2038  * (% _mstvisible="3" %)
2039 2039  (((
2040 2040  (% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
2041 -(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%) : LoRaWAN AU915 频段
2031 +(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
2042 2042  )))
2043 2043  * (% _mstvisible="3" %)
2044 2044  (((
2045 2045  (% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
2046 -(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%) : LoRaWAN EU433 频段
2036 +(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
2047 2047  )))
2048 2048  * (% _mstvisible="3" %)
2049 2049  (((
2050 2050  (% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
2051 -(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%) : LoRaWAN EU868 频段
2041 +(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
2052 2052  )))
2053 2053  * (% _mstvisible="3" %)
2054 2054  (((
2055 2055  (% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
2056 -(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%) : LoRaWAN KR920 带
2046 +(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
2057 2057  )))
2058 2058  * (% _mstvisible="3" %)
2059 2059  (((
2060 2060  (% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
2061 -(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%) : LoRaWAN US915 频段
2051 +(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
2062 2062  )))
2063 2063  * (% _mstvisible="3" %)
2064 2064  (((
2065 2065  (% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
2066 -(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%) : LoRaWAN IN865 频段
2056 +(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
2067 2067  )))
2068 2068  * (% _mstvisible="3" %)
2069 2069  (((
2070 2070  (% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
2071 -(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%) : LoRaWAN CN470 频段
2061 +(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
2072 2072  )))
2073 2073  
2074 2074  (% _mstvisible="1" %)
2075 2075  (((
2076 2076  (% _msthash="506269" _msttexthash="443495" _mstvisible="2" %)
2077 -(% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%) : 传感器配件
2067 +(% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
2078 2078  )))
2079 2079  
2080 2080  (% _mstvisible="1" %)
... ... @@ -2081,7 +2081,7 @@
2081 2081  * (% _mstvisible="3" %)
2082 2082  (((
2083 2083  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
2084 -(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%)：外部温度探头
2074 +(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
2085 2085  
2086 2086  
2087 2087  (% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
... ... @@ -2089,7 +2089,7 @@
2089 2089  )))
2090 2090  
2091 2091  (% _mstvisible="1" %)
2092 -= (% _msthash="233363" _msttexthash="13823550" _mstvisible="3" %)8. (%%)包装信息 =
2082 += (% _msthash="233363" _msttexthash="13823550" _mstvisible="3" %)8. 包装信息(%%) =
2093 2093  
2094 2094  (% _mstvisible="1" %)
2095 2095  (((
... ... @@ -2097,7 +2097,7 @@
2097 2097  
2098 2098  
2099 2099  (% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
2100 -(% _mstvisible="3" %)**套餐包括**(%%)：
2090 +(% _mstvisible="3" %)**Package Includes**(%%):
2101 2101  )))
2102 2102  
2103 2103  (% _mstvisible="1" %)
... ... @@ -2104,23 +2104,23 @@
2104 2104  * (% _mstvisible="3" %)
2105 2105  (((
2106 2106  (% _msthash="903336" _msttexthash="1033149" _mstvisible="4" %)
2107 -LHT65N 温湿度传感器 x 1
2097 +LHT65N Temperature & Humidity Sensor x 1
2108 2108  )))
2109 2109  * (% _mstvisible="3" %)
2110 2110  (((
2111 2111  (% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
2112 -程序线 x 1
2102 +Program cable x 1
2113 2113  )))
2114 2114  * (% _mstvisible="3" %)
2115 2115  (((
2116 2116  (% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
2117 -可选的外部传感器
2107 +Optional external sensor
2118 2118  )))
2119 2119  
2120 2120  (% _mstvisible="1" %)
2121 2121  (((
2122 2122  (% _msthash="506271" _msttexthash="403858" _mstvisible="2" %)
2123 -(% _mstvisible="3" %)**尺寸和重量**(%%)：
2113 +(% _mstvisible="3" %)**Dimension and weight**(%%):
2124 2124  )))
2125 2125  
2126 2126  (% _mstvisible="1" %)
... ... @@ -2127,22 +2127,22 @@
2127 2127  * (% _mstvisible="3" %)
2128 2128  (((
2129 2129  (% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
2130 -设备尺寸：13.5 x 7 x 3 厘米
2120 +Device Size:  13.5 x 7 x 3 cm
2131 2131  )))
2132 2132  * (% _mstvisible="3" %)
2133 2133  (((
2134 2134  (% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
2135 -设备重量：105g
2125 +Device Weight: 105g
2136 2136  )))
2137 2137  * (% _mstvisible="3" %)
2138 2138  (((
2139 2139  (% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
2140 -包装尺寸/个：14.5 x 8 x 5 cm
2130 +Package Size / pcs : 14.5 x 8 x 5 cm
2141 2141  )))
2142 2142  * (% _mstvisible="3" %)
2143 2143  (((
2144 2144  (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
2145 -重量/个：170g
2135 +Weight / pcs : 170g
2146 2146  
2147 2147  
2148 2148  (% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
... ... @@ -2153,22 +2153,22 @@
2153 2153  
2154 2154  * [[数据表、照片、解码器、固件>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor||_msthash="504975" _msttexthash="51420512"]]
2155 2155  
2156 -= (% _msthash="216320" _msttexthash="10002096" %)10. (%%) FCC 警告 =
2146 += (% _msthash="216320" _msttexthash="10002096" %)10. FCC 警告(%%) =
2157 2157  
2158 2158  (% _mstvisible="1" %)
2159 2159  (((
2160 2160  (% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
2161 -本设备符合 FCC 规则第 15 部分的规定。操作需满足以下两个条件：
2151 +This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
2162 2162  )))
2163 2163  
2164 2164  (% _mstvisible="1" %)
2165 2165  (((
2166 2166  (% _msthash="506273" _msttexthash="44097638" _mstvisible="2" %)
2167 -(1) 本设备不会造成有害干扰；
2157 +(1) This device may not cause harmful interference；
2168 2168  )))
2169 2169  
2170 2170  (% _mstvisible="1" %)
2171 2171  (((
2172 2172  (% _msthash="506274" _msttexthash="7559773" _mstvisible="2" %)
2173 -(2) 本设备必须接受接收到的任何干扰，包括可能导致意外操作的干扰。
2163 +(2) this device must accept any interference received, including interference that may cause undesired operation.
2174 2174  )))