Last modified by Mengting Qiu on 2024/04/30 14:27
<
From version < 103.3 >
edited by Bei Jinggeng
on 2022/05/25 16:24
To version < 57.11 >
edited by Xiaoling
on 2022/05/23 14:14
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220523115324-1.jpeg||height="317" width="317"]]
2 +[[image:image-20220523115324-1.jpeg||height="500" width="500"]]
3 3  
4 4  
5 5  **LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
... ... @@ -6,7 +6,6 @@
6 6  
7 7  
8 8  
9 -
10 10  **Table of Contents：**
11 11  
12 12  {{toc/}}
... ... @@ -13,9 +13,8 @@
13 13  
14 14  
15 15  
15 += 1.Introduction =
16 16  
17 -= 1. Introduction =
18 -
19 19  == 1.1 What is LHT65N Temperature & Humidity Sensor ==
20 20  
21 21  (((
... ... @@ -134,7 +134,11 @@
134 134  
135 135  [[image:image-20220515123819-1.png||height="379" width="317"]]
136 136  
137 -[[image:image-20220525110604-2.png]]
135 +(% border="1" style="background-color:#ffffcc; color:green; width:739px" %)
136 +|**Behavior on ACT**|**Function**|(% style="width:424px" %)**Action**
137 +|**Pressing ACT between 1s < time < 3s**|Test uplink status|(% style="width:424px" %)If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.
138 +|**Pressing ACT for more than 3s**|Active Device|(% style="width:424px" %)green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.
139 +|**Fast press ACT 5 times**|Deactivate Device|(% style="width:424px" %)red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.
138 138  
139 139  == 2.3 Example to join LoRaWAN network ==
140 140  
... ... @@ -188,40 +188,45 @@
188 188  
189 189  After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:426px" %)
192 -|(% style="width:97px" %)(((
193 +
194 +(% border="1" style="background-color:#ffffcc; color:green; width:428px" %)
195 +|(% style="width:106px" %)(((
193 193  **Size(bytes)**
194 -)))|(% style="width:39px" %)(((
197 +)))|(% style="width:46px" %)(((
195 195  **2**
196 -)))|(% style="width:100px" %)(((
199 +)))|(% style="width:104px" %)(((
197 197  **2**
198 -)))|(% style="width:77px" %)(((
201 +)))|(% style="width:80px" %)(((
199 199  **2**
200 -)))|(% style="width:47px" %)(((
201 -**1**
202 202  )))|(% style="width:51px" %)(((
204 +**1**
205 +)))|(% style="width:35px" %)(((
203 203  **4**
204 204  )))
205 -|(% style="width:97px" %)(((
208 +|(% style="width:106px" %)(((
206 206  **Value**
207 -)))|(% style="width:39px" %)(((
208 -[[BAT>>||anchor="H2.4.2BAT-BatteryInfo"]]
209 -)))|(% style="width:100px" %)(((
210 +)))|(% style="width:46px" %)(((
211 +[[BAT>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.2BAT-BatteryInfo]]
212 +)))|(% style="width:104px" %)(((
210 210  (((
211 -[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature"]]
214 +[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
212 212  )))
213 -)))|(% style="width:77px" %)(((
216 +
214 214  (((
215 -[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]
218 +[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
216 216  )))
220 +)))|(% style="width:80px" %)(((
221 +(((
222 +[[Built-in>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
223 +)))
217 217  
218 218  (((
219 -[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]
226 +[[Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
220 220  )))
221 -)))|(% style="width:47px" %)(((
222 -[[Ext>>||anchor="H2.4.5Ext23"]] #
223 223  )))|(% style="width:51px" %)(((
224 -[[Ext value>>||anchor="H2.4.6Extvalue"]]
229 +[[Ext>>path:#Extension_Sensor]] #
230 +)))|(% style="width:35px" %)(((
231 +[[Ext value>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.6Extvalue]]
225 225  )))
226 226  
227 227  * The First 6 bytes: has fix meanings for every LHT65N.
... ... @@ -242,8 +242,40 @@
242 242  
243 243  These two bytes of BAT include the battery state and the actually voltage
244 244  
245 -[[image:image-20220523152839-18.png]]
252 +(% border="1" style="background-color:#ffffcc; color:green; width:502px" %)
253 +|(% style="width:75px" %)(((
254 +Bit(bit)
255 +)))|(% style="width:259px" %)(((
256 +[15:14]
257 +)))|(% style="width:164px" %)(((
258 +[13:0]
259 +)))
260 +|(% style="width:75px" %)(((
261 +Value
262 +)))|(% style="width:259px" %)(((
263 +(((
264 +BAT Status
265 +)))
246 246  
267 +(((
268 +00(b): Ultra Low ( BAT <= 2.50v)
269 +)))
270 +
271 +(((
272 +01(b): Low  (2.50v <=BAT <= 2.55v)
273 +)))
274 +
275 +(((
276 +10(b): OK   (2.55v <= BAT <=2.65v)
277 +)))
278 +
279 +(((
280 +11(b): Good   (BAT >= 2.65v)
281 +)))
282 +)))|(% style="width:164px" %)(((
283 +Actually BAT voltage
284 +)))
285 +
247 247  [[image:image-20220522235639-1.png||height="139" width="727"]]
248 248  
249 249  Check the battery voltage for LHT65N.
... ... @@ -271,7 +271,10 @@
271 271  
272 272  Bytes for External Sensor:
273 273  
274 -[[image:image-20220523152822-17.png]]
313 +(% border="1" style="background-color:#ffffcc; color:green; width:473px" %)
314 +|(% style="width:139px" %)**EXT # Value**|(% style="width:331px" %)**External Sensor Type**
315 +|(% style="width:139px" %)0x01|(% style="width:331px" %)Sensor E3, Temperature Sensor
316 +|(% style="width:139px" %)0x09|(% style="width:331px" %)Sensor E3, Temperature Sensor, Datalog Mod
275 275  
276 276  === 2.4.6 Ext value ===
277 277  
... ... @@ -300,47 +300,21 @@
300 300  
301 301  Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
302 302  
303 -(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
304 -|(% style="width:96px" %)(((
305 -**Size(bytes)**
306 -)))|(% style="width:71px" %)(((
307 -**2**
308 -)))|(% style="width:99px" %)(((
309 -**2**
310 -)))|(% style="width:132px" %)(((
311 -**2**
312 -)))|(% style="width:54px" %)(((
313 -**1**
314 -)))|(% style="width:64px" %)(((
315 -**4**
316 -)))
317 -|(% style="width:96px" %)(((
318 -**Value**
319 -)))|(% style="width:71px" %)(((
320 -[[External temperature>>||anchor="H4.2SetExternalSensorMode"]]
321 -)))|(% style="width:99px" %)(((
322 -(((
323 -[[Built-In>>||anchor="H2.4.3Built-inTemperature"]]
324 -)))
345 +(% border="1" style="background-color:#ffffcc; color:green; width:541px" %)
346 +|(% style="width:96px" %)**Size(bytes)**|(% style="width:71px" %)**2**|(% style="width:69px" %)**2**|(% style="width:88px" %)**2**|(% style="width:69px" %)**1**|(% style="width:85px" %)**4**
347 +|(% style="width:96px" %)**Value**|(% style="width:71px" %)[[External temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.2SetExternalSensorMode]]|(% style="width:69px" %)(((
348 +[[Built-In>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
325 325  
326 -(((
327 -[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]
328 -)))
329 -)))|(% style="width:132px" %)(((
330 -(((
350 +[[Temperature>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.3Built-inTemperature]]
351 +)))|(% style="width:88px" %)(((
331 331  BAT Status &
332 -)))
333 333  
334 -(((
335 -[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]
354 +[[Built-in>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
355 +
356 +[[Humidity>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
357 +)))|(% style="width:69px" %)Status & Ext|(% style="width:85px" %)(((
358 +[[Unix Time Stamp>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.1SetTransmitIntervalTime]]
336 336  )))
337 -)))|(% style="width:54px" %)(((
338 -Status & Ext
339 -)))|(% style="width:64px" %)(((
340 -(((
341 -[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]
342 -)))
343 -)))
344 344  
345 345  * **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**
346 346  
... ... @@ -357,7 +357,7 @@
357 357  
358 358  11(b): Good   (BAT >= 2.65v)
359 359  )))|(% style="width:134px" %)(((
360 -[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]
376 +[[Built-in Humidity>>path:http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.4.4Built-inHumidity]]
361 361  
362 362  
363 363  )))
... ... @@ -364,7 +364,11 @@
364 364  
365 365  * **Status & Ext Byte**
366 366  
367 -[[image:image-20220523152434-16.png]]
383 +(% border="1" style="background-color:#ffffcc; color:green; width:587px" %)
384 +|(% style="width:109px" %)**Bits**|(% style="width:105px" %)**7**|(% style="width:105px" %)**6**|(% style="width:82px" %)**5**|(% style="width:84px" %)**4**|(% style="width:97px" %)**[3:0]**
385 +|(% style="width:109px" %)**Status & Ext**|(% style="width:105px" %)Not Defined|(% style="width:105px" %)Poll Message Flag|(% style="width:82px" %)Sync time OK|(% style="width:84px" %)Unix Time Request|(% style="width:97px" %)(((
386 +Ext:0b(1001)
387 +)))
368 368  
369 369  * Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
370 370  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
... ... @@ -397,21 +397,14 @@
397 397  
398 398  [[image:image-20220523000825-9.png||height="366" width="392"]]
399 399  
400 -[[image:image-20220523000825-10.png||height="413" width="728"]]
420 +[[image:image-20220523000825-10.png||height="432" width="762"]]
401 401  
402 402  == 2.6 Datalog Feature ==
403 403  
404 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
424 +This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.
405 405  
406 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
426 +=== 2.6.1 Unix TimeStamp ===
407 407  
408 -There are two methods:
409 -
410 -1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
411 -1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
412 -
413 -=== 2.6.2 Unix TimeStamp ===
414 -
415 415  LHT65N uses Unix TimeStamp format based on
416 416  
417 417  [[image:image-20220523001219-11.png||height="97" width="627"]]
... ... @@ -429,7 +429,7 @@
429 429  
430 430  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
431 431  
432 -=== 2.6.3 Set Device Time ===
445 +=== 2.6.2 Set Device Time ===
433 433  
434 434  (((
435 435  There are two ways to set device’s time:
... ... @@ -463,169 +463,75 @@
463 463  User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
464 464  )))
465 465  
466 -=== 2.6.4 Poll sensor value ===
479 +=== 2.6.3 Poll sensor value ===
467 467  
468 468  User can poll sensor value based on timestamps from the server. Below is the downlink command.
469 469  
470 -[[image:image-20220523152302-15.png]]
471 471  
472 -(((
484 +(% border="1" style="width:454px" %)
485 +|(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte
486 +|(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval
487 +
473 473  Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
474 -)))
475 475  
476 -(((
477 -For example, downlink command (% style="display:none" %) (%%)**31 5FC5F350 5FC6 0160 05**
478 -)))
479 479  
480 -(((
491 +For example, downlink command 31 5FC5F350 5FC6 0160 05
492 +
481 481  Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
482 -)))
483 483  
484 -(((
485 485  Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
486 -)))
487 487  
488 488  
489 -=== 2.6.5 Datalog Uplink payload ===
498 +=== 2.6.4 Datalog Uplink payload ===
490 490  
491 491  The Datalog poll reply uplink will use below payload format.
492 492  
493 -(((
494 -**Retrieval data payload**
495 -)))
496 496  
497 -(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
498 -|(% style="width:93px" %)(((
499 -(((
500 -**Size(bytes)**
501 -)))
502 -)))|(% style="width:71px" %)(((
503 -(((
504 -**2**
505 -)))
506 -)))|(% style="width:102px" %)(((
507 -(((
508 -**2**
509 -)))
510 -)))|(% style="width:86px" %)(((
511 -(((
512 -**2**
513 -)))
514 -)))|(% style="width:86px" %)(((
515 -(((
516 -**1**
517 -)))
518 -)))|(% style="width:48px" %)(((
519 -(((
520 -**4**
521 -)))
522 -)))
523 -|(% style="width:93px" %)(((
524 -(((
525 -**Value**
526 -)))
527 -)))|(% style="width:71px" %)(((
528 -(((
529 -[[External sensor data>>||anchor="H2.4.6Extvalue"]]
530 -)))
531 -)))|(% style="width:102px" %)(((
532 -(((
533 -(((
534 -[[Built In>>||anchor="H2.4.3Built-inTemperature"]]
535 -)))
536 -)))
503 +Retrieval data payload
537 537  
538 -(((
539 -(((
540 -[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]
541 -)))
542 -)))
543 -)))|(% style="width:86px" %)(((
544 -(((
545 -(((
546 -[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]
547 -)))
548 -)))
505 +(% border="1" %)
506 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**4**
507 +|**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((
508 +[[Built-In>>path:#SHT20_Temperature]]
549 549  
550 -(((
551 -(((
552 -[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]
553 -)))
554 -)))
555 -)))|(% style="width:86px" %)(((
556 -(((
557 -Poll message flag & Ext
558 -)))
559 -)))|(% style="width:48px" %)(((
560 -(((
561 -(((
562 -[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]
563 -)))
564 -)))
510 +[[Temperature>>path:#SHT20_Temperature]]
511 +)))|(((
512 +[[Built-in>>path:#SHT20_Humidity]]
565 565  
566 -(((
567 -(((
514 +[[Humidity>>path:#SHT20_Humidity]]
515 +)))|[[Poll message flag & Ext>>path:#Poll_EXT]]|(((
516 +[[Unix Time Stamp>>path:#Unix_Time_Stamp]]
517 +
568 568  
569 569  )))
570 -)))
571 -)))
572 572  
573 -**Poll message flag & Ext**
521 +Poll message flag & Ext
574 574  
575 -[[image:image-20220523152208-14.png]]
576 576  
577 -(((
578 -(((
579 -Poll Message Flag: 1: This message is a poll message reply.
580 -)))
581 -)))
524 +(% border="1" %)
525 +|**Bits**|**7**|**6**|**5**|**4**|**[3:0]**
526 +|**Status & Ext**|Not Defined|Poll Message Flag|Sync time OK|Unix Time Request|(((
527 +Ext:
582 582  
583 -* (((
584 -(((
585 -Poll Message Flag is set to 1.
529 +0b(1001)
586 586  )))
587 -)))
588 -* (((
589 -(((
590 -Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
591 -)))
592 -)))
593 593  
594 -(((
595 -(((
532 +Poll Message Flag: 1: This message is a poll message reply.
533 +
534 +* Poll Message Flag is set to 1.
535 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
536 +
596 596  For example, in US915 band, the max payload for different DR is:
597 -)))
598 -)))
599 599  
600 -(((
601 -(((
602 -a) DR0: max is 11 bytes so one entry of data
603 -)))
604 -)))
539 +a)      DR0: max is 11 bytes so one entry of data
605 605  
606 -(((
607 -(((
608 -b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
609 -)))
610 -)))
541 +b)      DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
611 611  
612 -(((
613 -(((
614 -c) DR2: total payload includes 11 entries of data
615 -)))
616 -)))
543 +c)      DR2: total payload includes 11 entries of data
617 617  
618 -(((
619 -(((
620 -d) DR3: total payload includes 22 entries of data.
621 -)))
622 -)))
545 +d)      DR3: total payload includes 22 entries of data.
623 623  
624 -(((
625 -(((
626 626  If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0   
627 -)))
628 -)))
629 629  
630 630  
631 631  **Example:**
... ... @@ -632,27 +632,35 @@
632 632  
633 633  If LHT65N has below data inside Flash:
634 634  
635 -[[image:image-20220523144455-1.png||height="335" width="735"]]
554 +Flash Addr   |Unix Time | Ext | BAT voltage|  Value                  
636 636  
637 -(((
638 -If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705
639 -)))
556 +80196E0 21/1/19 04:27:03 1 3145 sht_temp=22.00 sht_hum=32.6 ds_temp=327.67
640 640  
641 -(((
558 +80196F0 21/1/19 04:28:57 1 3145 sht_temp=21.90 sht_hum=33.1 ds_temp=327.67
559 +
560 +8019700 21/1/19 04:30:30 1 3145 sht_temp=21.81 sht_hum=33.4 ds_temp=327.67
561 +
562 +8019710 21/1/19 04:40:30 1 3145 sht_temp=21.65 sht_hum=33.7 ds_temp=327.67
563 +
564 +8019720 21/1/19 04:50:30 1 3147 sht_temp=21.55 sht_hum=34.1 ds_temp=327.67
565 +
566 +8019730 21/1/19 05:00:30 1 3149 sht_temp=21.50 sht_hum=34.1 ds_temp=327.67
567 +
568 +8019740 21/1/19 05:10:30 1 3149 sht_temp=21.43 sht_hum=34.6 ds_temp=327.67
569 +
570 +8019750 21/1/19 05:20:30 1 3151 sht_temp=21.35 sht_hum=34.9 ds_temp=327.67
571 +
572 +
573 +If user sends below downlink command:
574 +
575 +3160065F9760066DA705
576 +
642 642   Where : Start time: 60065F97 = time 21/1/19 04:27:03
643 -)))
644 644  
645 -(((
646 646   Stop time 60066DA7= time 21/1/19 05:27:03
647 -)))
648 648  
649 -(((
650 -
651 -)))
652 652  
653 -(((
654 654  LHT65N will uplink this payload.
655 -)))
656 656  
657 657  [[image:image-20220523001219-13.png||height="421" width="727"]]
658 658  
... ... @@ -677,51 +677,30 @@
677 677  
678 678  Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
679 679  
680 -(((
681 -(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
682 -)))
683 683  
684 -**AT Commands for Alarm mode:**
608 +Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
685 685  
686 -(% class="box infomessage" %)
687 -(((
610 +
611 +AT Commands for Alarm mode:
612 +
688 688  **AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)
689 -(% class="box infomessage" %)**AT**(%%)**+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
690 690  
691 -(% class="box infomessage" %)**AT+ARTEMP:**(%%) Get or set the internal Temperature sensor alarm range
615 +**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
692 692  
693 -AT
694 -)))
695 695  
696 -(% class="wikigeneratedid" %)
697 -== ==
698 698  
699 699  == 2.8 LED Indicator ==
700 700  
701 -(((
702 702  The LHT65N has a triple color LED which for easy shows different stage.
703 -)))
704 704  
705 -(((
706 706  While pressing ACT button, the LED will work as per LED status with ACT button.
707 -)))
708 708  
709 -(((
710 710  In a normal working state:
711 -)))
712 712  
713 -* (((
714 -For each uplink, the BLUE LED or RED LED will blink once.
715 -)))
716 -* (((
717 -BLUE LED when an external sensor is connected
718 -)))
719 -* (((
720 -RED LED when an external sensor is not connected
721 -)))
722 -* (((
723 -For each success downlink, the PURPLE LED will blink once
724 -)))
627 +* For each uplink, the BLUE LED or RED LED will blink once.
628 +* BLUE LED when an external sensor is connected
629 +* RED LED when an external sensor is not connected
630 +* For each success downlink, the PURPLE LED will blink once
725 725  
726 726  ----
727 727  
... ... @@ -747,55 +747,29 @@
747 747  
748 748  = 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
749 749  
750 -(((
751 751  Use can configure LHT65N via AT Command or LoRaWAN Downlink.
752 -)))
753 753  
754 -* (((
755 -AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
756 -)))
757 -* (((
758 -LoRaWAN Downlink instruction for different platforms:
759 -)))
658 +* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
659 +* LoRaWAN Downlink instruction for different platforms:
760 760  
761 -(((
762 762  [[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
763 -)))
764 764  
765 -(((
766 766  There are two kinds of commands to configure LHT65N, they are:
767 -)))
768 768  
769 -(((
770 -(% style="color:#4f81bd" %)* **General Commands**.
771 -)))
665 +* **General Commands**.
772 772  
773 -(((
774 774  These commands are to configure:
775 -)))
776 776  
777 -* (((
778 -General system settings like: uplink interval.
779 -)))
780 -* (((
781 -LoRaWAN protocol & radio-related commands.
782 -)))
669 +* General system settings like: uplink interval.
670 +* LoRaWAN protocol & radio-related commands.
783 783  
784 -(((
785 785  They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
786 -)))
787 787  
788 -(((
789 789  [[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
790 -)))
791 791  
792 -(((
793 -(% style="color:#4f81bd" %)* **Commands special design for LHT65N**
794 -)))
676 +* **Commands special design for LHT65N**
795 795  
796 -(((
797 797  These commands are only valid for LHT65N, as below:
798 -)))
799 799  
800 800  == 4.1 Set Transmit Interval Time ==
801 801  
... ... @@ -803,26 +803,29 @@
803 803  
804 804  **AT Command: AT+TDC**
805 805  
806 -[[image:image-20220523150701-2.png]]
686 +(% border="1" %)
687 +|**Command Example**|**Function**|**Response**
688 +|AT+TDC?|Show current transmit Interval|(((
689 +30000
807 807  
808 -(((
809 -**Downlink Command: 0x01**
691 +OK
692 +
693 +the interval is 30000ms = 30s
810 810  )))
695 +|AT+TDC=60000|Set Transmit Interval|(((
696 +OK
811 811  
812 -(((
813 -Format: Command Code (0x01) followed by 3 bytes time value.
698 +Set transmit interval to 60000ms = 60 seconds
814 814  )))
815 815  
816 -(((
701 +**Downlink Command: 0x01**
702 +
703 +Format: Command Code (0x01) followed by 3 bytes time value.
704 +
817 817  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
818 -)))
819 819  
820 -* (((
821 -**Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
822 -)))
823 -* (((
824 -**Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
825 -)))
707 +* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
708 +* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
826 826  
827 827  == 4.2 Set External Sensor Mode ==
828 828  
... ... @@ -830,29 +830,27 @@
830 830  
831 831  **AT Command: AT+EXT**
832 832  
833 -[[image:image-20220523150759-3.png]]
716 +(% border="1" %)
717 +|**Command Example**|**Function**|**Response**
718 +|AT+EXT?|Get current external sensor mode|(((
719 +1
834 834  
835 -(((
836 -**Downlink Command: 0xA2**
721 +OK
722 +
723 +External Sensor mode =1
837 837  )))
725 +|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1
726 +|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp
838 838  
839 -(((
728 +**Downlink Command: 0xA2**
729 +
840 840  Total bytes: 2 ~~ 5 bytes
841 -)))
842 842  
843 -(((
844 -**Example:**
845 -)))
732 +Example:
846 846  
847 -* (((
848 -0xA201: Set external sensor type to E1
849 -)))
850 -* (((
851 -0xA209: Same as AT+EXT=9
852 -)))
853 -* (((
854 -0xA20702003c,Same as AT+SETCNT=60
855 -)))
734 +* 0xA201: Set external sensor type to E1
735 +* 0xA209: Same as AT+EXT=9
736 +* 0xA20702003c,Same as AT+SETCNT=60
856 856  
857 857  == 4.3 Enable/Disable uplink Temperature probe ID ==
858 858  
... ... @@ -863,14 +863,17 @@
863 863  
864 864  PID is default set to disable (0)
865 865  
747 +
866 866  **AT Command:**
867 867  
868 -[[image:image-20220523150928-4.png]]
750 +(% border="1" %)
751 +|**Command Example**|**Function**|**Response**
752 +|AT+PID=1|Enable PID uplink|OK
869 869  
870 870  **Downlink Command:**
871 871  
872 -* 0xA800  **~-~->** AT+PID=0
873 -* 0xA801     **~-~->** AT+PID=1
756 +* 0xA800     à AT+PID=0
757 +* 0xA801     à AT+PID=1
874 874  
875 875  == 4.4 Set Password ==
876 876  
... ... @@ -878,15 +878,19 @@
878 878  
879 879  **AT Command: AT+PWORD**
880 880  
881 -[[image:image-20220523151052-5.png]]
765 +(% border="1" %)
766 +|**Command Example**|**Function**|**Response**
767 +|AT+PWORD=?|Show password|(((
768 +123456
882 882  
883 -(((
884 -**Downlink Command:**
770 +
771 +OK
885 885  )))
773 +|AT+PWORD=999999|Set password|OK
886 886  
887 -(((
775 +**Downlink Command:**
776 +
888 888  No downlink command for this feature.
889 -)))
890 890  
891 891  == 4.5 Quit AT Command ==
892 892  
... ... @@ -894,12 +894,15 @@
894 894  
895 895  **AT Command: AT+DISAT**
896 896  
897 -[[image:image-20220523151132-6.png]]
785 +(% border="1" %)
786 +|**Command Example**|**Function**|**Response**
787 +|AT+DISAT|Quit AT Commands mode|OK
898 898  
899 899  **Downlink Command:**
900 900  
901 901  No downlink command for this feature.
902 902  
793 +
903 903  == 4.6 Set to sleep mode ==
904 904  
905 905  Feature: Set device to sleep mode
... ... @@ -906,8 +906,15 @@
906 906  
907 907  **AT Command: AT+SLEEP**
908 908  
909 -[[image:image-20220523151218-7.png]]
800 +(% border="1" %)
801 +| | |
802 +|**Command Example**|**Function**|**Response**
803 +|AT+SLEEP|Set to sleep mode|(((
804 +Clear all stored sensor data…
910 910  
806 +OK
807 +)))
808 +
911 911  **Downlink Command:**
912 912  
913 913  * There is no downlink command to set to Sleep mode.
... ... @@ -914,12 +914,18 @@
914 914  
915 915  == 4.7 Set system time ==
916 916  
917 -Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
815 +Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]
918 918  
919 919  **AT Command:**
920 920  
921 -[[image:image-20220523151253-8.png]]
819 +(% border="1" %)
820 +|**Command Example**|**Function**
821 +|AT+TIMESTAMP=1611104352|(((
822 +OK
922 922  
824 +Set System time to 2021-01-20 00:59:12
825 +)))
826 +
923 923  **Downlink Command:**
924 924  
925 925  0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
... ... @@ -926,19 +926,15 @@
926 926  
927 927  == 4.8 Set Time Sync Mode ==
928 928  
929 -(((
930 930  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
931 -)))
932 932  
933 -(((
934 934  SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
935 -)))
936 936  
937 -(((
837 +
938 938  **AT Command:**
939 -)))
940 940  
941 -[[image:image-20220523151336-9.png]]
840 +|**Command Example**|**Function**
841 +|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)
942 942  
943 943  **Downlink Command:**
944 944  
... ... @@ -952,7 +952,9 @@
952 952  
953 953  **AT Command:**
954 954  
955 -[[image:image-20220523151411-10.png]]
855 +(% border="1" %)
856 +|**Command Example**|**Function**
857 +|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.
956 956  
957 957  **Downlink Command:**
958 958  
... ... @@ -964,8 +964,51 @@
964 964  
965 965  **AT Command: AT+PDTA**
966 966  
967 -[[image:image-20220523151450-11.png]]
869 +(% border="1" %)
870 +|**Command Example**|**Response**
871 +|(((
872 +AT+PDTA=1,3
968 968  
874 +
875 +
876 +Print page 1 to 3
877 +)))|(((
878 +8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31
879 +
880 +8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93
881 +
882 +8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06
883 +
884 +8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12
885 +
886 +8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06
887 +
888 +8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68
889 +
890 +8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56
891 +
892 +8019570
893 +
894 +8019580
895 +
896 +8019590
897 +
898 +80195A0
899 +
900 +80195B0
901 +
902 +80195C0
903 +
904 +80195D0
905 +
906 +80195E0
907 +
908 +80195F0
909 +
910 +
911 +OK
912 +)))
913 +
969 969  **Downlink Command:**
970 970  
971 971  No downlink commands for feature
... ... @@ -976,41 +976,54 @@
976 976  
977 977  **AT Command: AT+PLDTA**
978 978  
979 -[[image:image-20220523151524-12.png]]
924 +(% border="1" %)
925 +|**Command Example**|**Response**
926 +|(((
927 +AT+PLDTA=5
980 980  
981 -**Downlink Command:**
982 982  
983 -No downlink commands for feature
984 984  
985 -== 4.12 Clear Flash Record ==
931 +Print last 5 entries
932 +)))|(((
933 +Stop Tx and RTP events when read sensor data
986 986  
987 -Feature: Clear flash storage for data log feature.
935 +1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75
988 988  
989 -**AT Command: AT+CLRDTA**
937 +2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43
990 990  
991 -[[image:image-20220523151556-13.png]]
939 +3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56
992 992  
993 -**Downlink Command: 0xA3**
941 +4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75
994 994  
995 -* Example: 0xA301 ~/~/Same as AT+CLRDTA
943 +5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43
996 996  
997 -== 4.13 Auto Send None-ACK messages ==
945 +Start Tx and RTP events
998 998  
999 -Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
947 +OK
948 +)))
1000 1000  
950 +**Downlink Command:**
1001 1001  
1002 -**AT Command: AT+PNACKMD**
952 +No downlink commands for feature
1003 1003  
1004 -The default factory setting is 0
954 +== 4.12 Clear Flash Record ==
1005 1005  
1006 -(% border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1007 -|=(% style="width: 171px;" %)**Command Example**|=(% style="width: 219px;" %)**Function**|=(% style="width: 119px;" %)**Response**
1008 -|(% style="width:171px" %)AT+PNACKMD=1|(% style="width:219px" %)Poll None-ACK message|(% style="width:119px" %)OK
956 +Feature: Clear flash storage for data log feature.
1009 1009  
1010 -**Downlink Command: 0x34**
958 +**AT Command: AT+CLRDTA**
1011 1011  
1012 -* Example: 0x3401 ~/~/Same as AT+PNACKMD=1
960 +(% border="1" %)
961 +|**Command Example**|**Function**|**Response**
962 +|AT+CLRDTA|Clear date record|(((
963 +Clear all stored sensor data…
1013 1013  
965 +OK
966 +)))
967 +
968 +**Downlink Command: 0xA3**
969 +
970 +* Example: 0xA301 ~/~/Same as AT+CLRDTA
971 +
1014 1014  = 5. Battery & How to replace =
1015 1015  
1016 1016  == 5.1 Battery Type ==
... ... @@ -1017,15 +1017,11 @@
1017 1017  
1018 1018  LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1019 1019  
1020 -(((
1021 1021  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1022 1022  [[image:image-20220515075034-1.png||height="208" width="644"]]
1023 -)))
1024 1024  
1025 -(((
1026 1026  The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1027 1027  
1028 -)))
1029 1029  
1030 1030  == 5.2 Replace Battery ==
1031 1031  
... ... @@ -1035,97 +1035,47 @@
1035 1035  
1036 1036  == 5.3 Battery Life Analyze ==
1037 1037  
1038 -(((
1039 1039  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1040 1040  https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
1041 -)))
1042 1042  
1043 1043  = 6. Order Info =
1044 1044  
1045 -(((
1046 -Part Number: (% style="color:#4f81bd" %)** LHT65N-XX-YY**
1047 -)))
997 +Part Number: (% class="mark" %)**LHT65N-XX**
1048 1048  
1049 -(((
1050 -(% style="color:#4f81bd" %)**XX **(%%): The default frequency band
1051 -)))
999 +**XX**: The default frequency band
1052 1052  
1053 -* (((
1054 -(% style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1055 -)))
1056 -* (((
1057 -(% style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1058 -)))
1059 -* (((
1060 -(% style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1061 -)))
1062 -* (((
1063 -(% style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1064 -)))
1065 -* (((
1066 -(% style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1067 -)))
1068 -* (((
1069 -(% style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1070 -)))
1071 -* (((
1072 -(% style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1073 -)))
1074 -* (((
1075 -(% style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1076 -)))
1001 +* **AS923**: LoRaWAN AS923 band
1002 +* **AU915**: LoRaWAN AU915 band
1003 +* **EU433**: LoRaWAN EU433 band
1004 +* **EU868**: LoRaWAN EU868 band
1005 +* **KR920**: LoRaWAN KR920 band
1006 +* **US915**: LoRaWAN US915 band
1007 +* **IN865**: LoRaWAN IN865 band
1008 +* **CN470**: LoRaWAN CN470 band
1077 1077  
1078 -(((
1079 -(% style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1080 -)))
1010 +**YY**: Sensor Accessories
1081 1081  
1082 -* (((
1083 -(% style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1084 -)))
1012 +* **E3**: External Temperature Probe
1085 1085  
1086 1086  = 7. Packing Info =
1087 1087  
1088 -(((
1089 1089  **Package Includes**:
1090 -)))
1091 1091  
1092 -* (((
1093 -LHT65N Temperature & Humidity Sensor x 1
1094 -)))
1095 -* (((
1096 -Program cable x 1
1097 -)))
1098 -* (((
1099 -Optional external sensor
1100 -)))
1018 +* LHT65N Temperature & Humidity Sensor x 1
1019 +* Program cable x 1
1020 +* Optional external sensor
1101 1101  
1102 -(((
1103 1103  **Dimension and weight**:
1104 -)))
1105 1105  
1106 -* (((
1107 -Device Size:  13.5 x 7 x 3 cm
1108 -)))
1109 -* (((
1110 -Device Weight: 105g
1111 -)))
1112 -* (((
1113 -Package Size / pcs : 14.5 x 8 x 5 cm
1114 -)))
1115 -* (((
1116 -Weight / pcs : 170g
1117 -)))
1024 +* Device Size:  13.5 x 7 x 3 cm
1025 +* Device Weight: 105g
1026 +* Package Size / pcs : 14.5 x 8 x 5 cm
1027 +* Weight / pcs : 170g
1118 1118  
1119 1119  = 8. FCC Warning =
1120 1120  
1121 -(((
1122 1122  This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1123 -)))
1124 1124  
1125 -(((
1126 1126  (1) This device may not cause harmful interference；
1127 -)))
1128 1128  
1129 -(((
1130 1130  (2) this device must accept any interference received, including interference that may cause undesired operation.
1131 -)))
image-20220523144455-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20220523150701-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.3 KB
Content
image-20220523150759-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.2 KB
Content
image-20220523150928-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -4.1 KB
Content
image-20220523151052-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.6 KB
Content
image-20220523151132-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.6 KB
Content
image-20220523151218-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.8 KB
Content
image-20220523151253-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.5 KB
Content
image-20220523151336-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.6 KB
Content
image-20220523151411-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.5 KB
Content
image-20220523151450-11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -38.4 KB
Content
image-20220523151524-12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -24.2 KB
Content
image-20220523151556-13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -5.7 KB
Content
image-20220523152208-14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.2 KB
Content
image-20220523152302-15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -4.3 KB
Content
image-20220523152434-16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -6.3 KB
Content
image-20220523152822-17.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -7.4 KB
Content
image-20220523152839-18.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20220523153201-19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -27.9 KB
Content
image-20220525110512-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
image-20220525110604-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -28.0 KB
Content
image-20220525113731-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -4.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0