Last modified by Mengting Qiu on 2024/04/30 14:27
<
From version < 103.3 >
edited by Bei Jinggeng
on 2022/05/25 16:24
To version < 120.10 >
edited by Xiaoling
on 2022/06/09 18:30
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,13 +1,15 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20220523115324-1.jpeg||height="317" width="317"]]
1 +(% _mstvisible="2" style="text-align:center" %)
2 +[[image:image-20220523115324-1.jpeg||_mstalt="469677" _mstvisible="4" height="317" width="317"]]
3 3  
4 4  
5 -**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
5 +(% _mstvisible="1" %)
6 +(% _msthash="315237" _msttexthash="1697033" _mstvisible="3" %)**LHT65N LoRaWAN Temperature & Humidity Sensor Manual**
6 6  
7 7  
8 8  
9 9  
10 -**Table of Contents：**
11 +(% _mstvisible="1" %)
12 +(% _msthash="315238" _msttexthash="18964465" _mstvisible="3" %)**Table of Contents：**
11 11  
12 12  {{toc/}}
13 13  
... ... @@ -14,36 +14,55 @@
14 14  
15 15  
16 16  
17 -= 1. Introduction =
19 +(% _mstvisible="1" %)
20 += (% _msthash="277498" _msttexthash="253045" _mstvisible="3" %)1. Introduction(%%) =
18 18  
19 -== 1.1 What is LHT65N Temperature & Humidity Sensor ==
22 +(% _mstvisible="1" %)
23 +== (% _msthash="1532895" _msttexthash="1426958" _mstvisible="3" %)1.1 What is LHT65N Temperature & Humidity Sensor(%%) ==
20 20  
25 +(% _mstvisible="1" %)
21 21  (((
22 -The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% style="color:#4f81bd" %)**Temperature Sensor**(%%)**.**
27 +(% _msthash="506051" _msttexthash="24333127" _mstvisible="2" %)
28 +The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% _mstvisible="4" style="color:#4f81bd" %)**built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% _mstvisible="4" style="color:#4f81bd" %)**Temperature Sensor**(% _mstvisible="3" %)**.**
23 23  )))
24 24  
31 +(% _mstvisible="1" %)
25 25  (((
33 +(% _msthash="506052" _msttexthash="66005810" _mstvisible="2" %)
26 26  The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.
27 27  )))
28 28  
37 +(% _mstvisible="1" %)
29 29  (((
39 +(% _msthash="506053" _msttexthash="4298047" _mstvisible="2" %)
30 30  LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.
31 31  )))
32 32  
43 +(% _mstvisible="1" %)
33 33  (((
45 +(% _msthash="506054" _msttexthash="6016374" _mstvisible="2" %)
34 34  LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.
35 35  )))
36 36  
49 +(% _mstvisible="1" %)
37 37  (((
38 -LHT65N supports (% style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
51 +(% _msthash="506055" _msttexthash="17023136" _mstvisible="2" %)
52 +LHT65N supports (% _mstvisible="4" style="color:#4f81bd" %)**Datalog Feature**(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.
39 39  )))
40 40  
55 +(% _mstvisible="1" %)
41 41  (((
57 +(% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
42 42  *The actual battery life depends on how often to send data, please see the battery analyzer chapter.
59 +
60 +(% _msthash="506056" _msttexthash="5557097" _mstvisible="2" %)
61 +
43 43  )))
44 44  
45 -== 1.2 Features ==
64 +(% _mstvisible="1" %)
65 +== (% _msthash="182559" _msttexthash="163319" _mstvisible="3" %)1.2 Features(%%) ==
46 46  
67 +(% _mstvisible="1" %)
47 47  * Wall mountable
48 48  * LoRaWAN v1.0.3 Class A protocol
49 49  * Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
... ... @@ -56,606 +56,974 @@
56 56  * Tri-color LED to indicate working status
57 57  * Datalog feature
58 58  
59 -== 1.3 Specification ==
80 +(% _mstvisible="1" %)
81 +== (% _msthash="323570" _msttexthash="297635" _mstvisible="3" %)1.3 Specification(%%) ==
60 60  
83 +(% _mstvisible="1" %)
61 61  (((
62 -**Built-in Temperature Sensor:**
85 +(% _mstvisible="2" %)
86 +
87 +
88 +(% _mstvisible="2" %)
89 +(% _msthash="506057" _msttexthash="671437" _mstvisible="4" %)**Built-in Temperature Sensor:**
63 63  )))
64 64  
65 -* (((
92 +(% _mstvisible="1" %)
93 +* (% _mstvisible="3" %)
94 +(((
95 +(% _msthash="902993" _msttexthash="294424" _mstvisible="4" %)
66 66  Resolution: 0.01 °C
67 67  )))
68 -* (((
98 +* (% _mstvisible="3" %)
99 +(((
100 +(% _msthash="902994" _msttexthash="690664" _mstvisible="4" %)
69 69  Accuracy Tolerance : Typ ±0.3 °C
70 70  )))
71 -* (((
103 +* (% _mstvisible="3" %)
104 +(((
105 +(% _msthash="902995" _msttexthash="504647" _mstvisible="4" %)
72 72  Long Term Drift: < 0.02 °C/yr
73 73  )))
74 -* (((
108 +* (% _mstvisible="3" %)
109 +(((
110 +(% _msthash="902996" _msttexthash="478257" _mstvisible="4" %)
75 75  Operating Range: -40 ~~ 85 °C
76 76  )))
77 77  
114 +(% _mstvisible="1" %)
78 78  (((
79 -**Built-in Humidity Sensor:**
116 +(% _mstvisible="2" %)
117 +
118 +
119 +(% _mstvisible="2" %)
120 +(% _msthash="506058" _msttexthash="544453" _mstvisible="4" %)**Built-in Humidity Sensor:**
80 80  )))
81 81  
82 -* (((
123 +(% _mstvisible="1" %)
124 +* (% _mstvisible="3" %)
125 +(((
126 +(% _msthash="902997" _msttexthash="282438" _mstvisible="4" %)
83 83  Resolution: 0.04 %RH
84 84  )))
85 -* (((
129 +* (% _mstvisible="3" %)
130 +(((
131 +(% _msthash="902998" _msttexthash="628771" _mstvisible="4" %)
86 86  Accuracy Tolerance : Typ ±3 %RH
87 87  )))
88 -* (((
134 +* (% _mstvisible="3" %)
135 +(((
136 +(% _msthash="902999" _msttexthash="504647" _mstvisible="4" %)
89 89  Long Term Drift: < 0.02 °C/yr
90 90  )))
91 -* (((
139 +* (% _mstvisible="3" %)
140 +(((
141 +(% _msthash="903000" _msttexthash="421291" _mstvisible="4" %)
92 92  Operating Range: 0 ~~ 96 %RH
93 93  )))
94 94  
145 +(% _mstvisible="1" %)
95 95  (((
96 -**External Temperature Sensor:**
147 +(% _mstvisible="2" %)
148 +
149 +
150 +(% _mstvisible="2" %)
151 +(% _msthash="506059" _msttexthash="680537" _mstvisible="4" %)**External Temperature Sensor:**
97 97  )))
98 98  
99 -* (((
154 +(% _mstvisible="1" %)
155 +* (% _mstvisible="3" %)
156 +(((
157 +(% _msthash="903001" _msttexthash="332254" _mstvisible="4" %)
100 100  Resolution: 0.0625 °C
101 101  )))
102 -* (((
160 +* (% _mstvisible="3" %)
161 +(((
162 +(% _msthash="903002" _msttexthash="782600" _mstvisible="4" %)
103 103  ±0.5°C accuracy from -10°C to +85°C
104 104  )))
105 -* (((
165 +* (% _mstvisible="3" %)
166 +(((
167 +(% _msthash="903003" _msttexthash="729482" _mstvisible="4" %)
106 106  ±2°C accuracy from -55°C to +125°C
107 107  )))
108 -* (((
170 +* (% _mstvisible="3" %)
171 +(((
172 +(% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
109 109  Operating Range: -55 °C ~~ 125 °C
174 +
175 +
176 +(% _msthash="903004" _msttexthash="592540" _mstvisible="4" %)
177 +
110 110  )))
111 111  
112 -= 2. Connect LHT65N to IoT Server =
180 +(% _mstvisible="1" %)
181 += (% _msthash="655759" _msttexthash="618618" _mstvisible="3" %)2. Connect LHT65N to IoT Server(%%) =
113 113  
114 -== 2.1 How does LHT65N work? ==
183 +(% _mstvisible="1" %)
184 +== (% _msthash="462371" _msttexthash="410332" _mstvisible="3" %)2.1 How does LHT65N work?(%%) ==
115 115  
186 +(% _mstvisible="1" %)
116 116  (((
188 +(% _msthash="506060" _msttexthash="28254538" _mstvisible="2" %)
117 117  LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.
118 118  )))
119 119  
192 +(% _mstvisible="1" %)
120 120  (((
194 +(% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
121 121  If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.
196 +
197 +(% _msthash="506061" _msttexthash="48200724" _mstvisible="2" %)
198 +
122 122  )))
123 123  
124 -== 2.2 How to Activate LHT65N? ==
201 +(% _mstvisible="1" %)
202 +== (% _msthash="514384" _msttexthash="458666" _mstvisible="3" %)2.2 How to Activate LHT65N?(%%) ==
125 125  
204 +(% _msthash="315239" _msttexthash="748241" _mstvisible="1" %)
126 126  The LHT65N has two working modes:
127 127  
207 +(% _mstvisible="1" %)
128 128  * **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.
129 129  * **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode. 
130 130  
211 +(% _mstvisible="1" %)
131 131  (((
213 +(% _msthash="506062" _msttexthash="6036823" _mstvisible="2" %)
132 132  The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:
133 133  )))
134 134  
135 -[[image:image-20220515123819-1.png||height="379" width="317"]]
217 +(% _mstvisible="1" %)
218 +[[image:image-20220515123819-1.png||_mstalt="430742" _mstvisible="3" height="379" width="317"]]
136 136  
137 -[[image:image-20220525110604-2.png]]
220 +(% _mstvisible="1" %)
221 +[[image:image-20220525110604-2.png||_mstalt="427531" _mstvisible="3"]]
138 138  
139 -== 2.3 Example to join LoRaWAN network ==
140 140  
141 -(% class="wikigeneratedid" %)
224 +(% _mstvisible="1" %)
225 +== (% _msthash="882726" _msttexthash="838526" _mstvisible="3" %)2.3 Example to join LoRaWAN network(%%) ==
226 +
227 +(% _msthash="315240" _msttexthash="9205482" _mstvisible="1" class="wikigeneratedid" %)
142 142  This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.
143 143  
144 -(% class="wikigeneratedid" %)
145 -[[image:image-20220522232442-1.png||height="387" width="648"]]
230 +(% _mstvisible="1" class="wikigeneratedid" %)
231 +[[image:image-20220522232442-1.png||_mstalt="427830" _mstvisible="3" height="387" width="648"]]
146 146  
147 -Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
233 +(% _msthash="315241" _msttexthash="10802155" _mstvisible="1" %)
234 +Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network||_mstvisible="2"]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:
148 148  
149 149  
150 -=== 2.3.1 Step 1: Create Device n TTN ===
237 +(% _mstvisible="1" %)
238 +=== (% _msthash="670592" _msttexthash="634075" _mstvisible="3" %)2.3.1 Step 1: Create Device n TTN(%%) ===
151 151  
240 +(% _msthash="315242" _msttexthash="1601782" _mstvisible="1" %)
152 152  Create a device in TTN V3 with the OTAA keys from LHT65N.
153 153  
243 +(% _msthash="315243" _msttexthash="3694444" _mstvisible="1" %)
154 154  Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:
155 155  
156 -[[image:image-20220522232812-2.png||height="219" width="279"]]
246 +(% _mstvisible="1" %)
247 +[[image:image-20220522232812-2.png||_mstalt="428467" _mstvisible="3" height="219" width="279"]]
157 157  
249 +(% _msthash="315244" _msttexthash="3659149" _mstvisible="1" %)
158 158  User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:
159 159  
252 +(% _msthash="315245" _msttexthash="642889" _mstvisible="1" %)
160 160  Add APP EUI in the application.
161 161  
162 -[[image:image-20220522232916-3.png]]
255 +(% _mstvisible="1" %)
256 +[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]
163 163  
164 -[[image:image-20220522232932-4.png]]
258 +(% _mstvisible="1" %)
259 +[[image:image-20220522232932-4.png||_mstalt="430157" _mstvisible="3"]]
165 165  
166 -[[image:image-20220522232954-5.png]]
261 +(% _mstvisible="1" %)
262 +[[image:image-20220522232954-5.png||_mstalt="431847" _mstvisible="3"]]
167 167  
264 +(% _msthash="315246" _msttexthash="878800" _mstvisible="1" %)
168 168  Note: LHT65N use same payload as LHT65.
169 169  
170 -[[image:image-20220522233026-6.png]]
267 +(% _mstvisible="1" %)
268 +[[image:image-20220522233026-6.png||_mstalt="429403" _mstvisible="3"]]
171 171  
172 172  
271 +(% _msthash="315247" _msttexthash="595543" _mstvisible="1" %)
173 173  Input APP EUI,  APP KEY and DEV EUI:
174 174  
175 -[[image:image-20220522233118-7.png]]
274 +(% _mstvisible="1" %)
275 +[[image:image-20220522233118-7.png||_mstalt="430430" _mstvisible="3"]]
176 176  
177 177  
178 -=== 2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===
278 +(% _mstvisible="1" %)
279 +=== (% _msthash="3537456" _msttexthash="3448549" _mstvisible="3" %)2.3.2 Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds.(%%) ===
179 179  
281 +(% _msthash="315248" _msttexthash="14452321" _mstvisible="1" %)
180 180  Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.
181 181  
182 -[[image:image-20220522233300-8.png||height="219" width="722"]]
284 +(% _mstvisible="1" %)
285 +[[image:image-20220522233300-8.png||_mstalt="428389" _mstvisible="3" height="219" width="722"]]
183 183  
184 184  
185 -== 2.4 Uplink Payload ==
288 +(% _mstvisible="1" %)
289 +== (% _msthash="320879" _msttexthash="294970" _mstvisible="3" %)2.4 Uplink Payload(%%) ==
186 186  
187 -The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
291 +(% _msthash="315249" _msttexthash="7722962" _mstvisible="1" %)
292 +The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and (% _mstvisible="3" style="color:#4f81bd" %)**every 20 minutes**(%%) send one uplink by default.
188 188  
189 -After each uplink, the (% style="color:blue" %)**BLUE LED**(%%) will blink once.
294 +(% _msthash="315250" _msttexthash="1322711" _mstvisible="1" %)
295 +After each uplink, the (% _mstvisible="3" style="color:blue" %)**BLUE LED**(%%) will blink once.
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:426px" %)
192 -|(% style="width:97px" %)(((
193 -**Size(bytes)**
194 -)))|(% style="width:39px" %)(((
195 -**2**
196 -)))|(% style="width:100px" %)(((
197 -**2**
198 -)))|(% style="width:77px" %)(((
199 -**2**
200 -)))|(% style="width:47px" %)(((
201 -**1**
202 -)))|(% style="width:51px" %)(((
203 -**4**
297 +(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)
298 +(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)
299 +(((
300 +(% _mstvisible="6" %)
301 +(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
302 +)))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)
303 +(((
304 +(% _mstvisible="6" %)
305 +(% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**
306 +)))|=(% _mstvisible="4" style="width: 100px;" %)(% _mstvisible="5" %)
307 +(((
308 +(% _mstvisible="6" %)
309 +(% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**
310 +)))|=(% _mstvisible="4" style="width: 77px;" %)(% _mstvisible="5" %)
311 +(((
312 +(% _mstvisible="6" %)
313 +(% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**
314 +)))|=(% _mstvisible="4" style="width: 47px;" %)(% _mstvisible="5" %)
315 +(((
316 +(% _mstvisible="6" %)
317 +(% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**
318 +)))|=(% _mstvisible="4" style="width: 51px;" %)(% _mstvisible="5" %)
319 +(((
320 +(% _mstvisible="6" %)
321 +(% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**
204 204  )))
205 -|(% style="width:97px" %)(((
206 -**Value**
207 -)))|(% style="width:39px" %)(((
208 -[[BAT>>||anchor="H2.4.2BAT-BatteryInfo"]]
209 -)))|(% style="width:100px" %)(((
323 +(% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)
210 210  (((
211 -[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature"]]
325 +(% _mstvisible="6" %)
326 +(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**
327 +)))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)
328 +(((
329 +(% _mstvisible="6" %)
330 +[[BAT>>||anchor="H2.4.2BAT-BatteryInfo" _msthash="1817485" _msttexthash="22594" _mstvisible="7"]]
331 +)))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)
332 +(((
333 +(% _mstvisible="6" %)
334 +(((
335 +(% _mstvisible="7" %)
336 +[[Built-In Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]
212 212  )))
213 -)))|(% style="width:77px" %)(((
338 +)))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)
214 214  (((
215 -[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]
340 +(% _mstvisible="6" %)
341 +(((
342 +(% _mstvisible="7" %)
343 +[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2224743" _msttexthash="105872" _mstvisible="8"]]
216 216  )))
217 217  
346 +(% _mstvisible="6" %)
218 218  (((
219 -[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]
348 +(% _mstvisible="7" %)
349 +[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]
220 220  )))
221 -)))|(% style="width:47px" %)(((
222 -[[Ext>>||anchor="H2.4.5Ext23"]] #
223 -)))|(% style="width:51px" %)(((
224 -[[Ext value>>||anchor="H2.4.6Extvalue"]]
351 +)))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)
352 +(((
353 +(% _mstvisible="6" %)
354 +[[Ext>>||anchor="H2.4.5Ext23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #
355 +)))|(% _mstvisible="4" style="width:51px" %)(% _mstvisible="5" %)
356 +(((
357 +(% _mstvisible="6" %)
358 +[[Ext value>>||anchor="H2.4.6Extvalue" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]
225 225  )))
226 226  
361 +(% _mstvisible="1" %)
227 227  * The First 6 bytes: has fix meanings for every LHT65N.
228 228  * The 7th byte (EXT #): defines the external sensor model.
229 -* The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
364 +* The 8(% _msthash="734578" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) ~~ 11(% _msthash="734579" _msttexthash="21372" _mstvisible="4" %)^^th^^(%%) byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)
230 230  
231 -=== 2.4.1 Decoder in TTN V3 ===
366 +(% _mstvisible="1" %)
367 +=== (% _msthash="360269" _msttexthash="333762" _mstvisible="3" %)2.4.1 Decoder in TTN V3(%%) ===
232 232  
369 +(% _msthash="315251" _msttexthash="9786491" _mstvisible="1" %)
233 233  When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.
234 234  
372 +(% _msthash="315252" _msttexthash="3928483" _mstvisible="1" %)
235 235  Below is the position to put the decoder and LHT65N decoder can be download from here:
236 236  
237 -[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
375 +(% _mstvisible="1" %)
376 +[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0||_msthash="315253" _msttexthash="3509064" _mstvisible="2"]]
238 238  
239 -[[image:image-20220522234118-10.png||height="353" width="729"]]
378 +(% _mstvisible="1" %)
379 +[[image:image-20220522234118-10.png||_mstalt="451464" _mstvisible="3" height="353" width="729"]]
240 240  
241 -=== 2.4.2 BAT-Battery Info ===
242 242  
382 +
383 +(% _mstvisible="1" %)
384 +=== (% _msthash="411411" _msttexthash="383656" _mstvisible="3" %)2.4.2 BAT-Battery Info(%%) ===
385 +
386 +(% _msthash="315254" _msttexthash="3122912" _mstvisible="1" %)
243 243  These two bytes of BAT include the battery state and the actually voltage
244 244  
245 -[[image:image-20220523152839-18.png]]
389 +(% _mstvisible="1" %)
390 +[[image:image-20220523152839-18.png||_mstalt="457613" _mstvisible="3"]]
246 246  
247 -[[image:image-20220522235639-1.png||height="139" width="727"]]
392 +(% _mstvisible="1" %)
393 +[[image:image-20220522235639-1.png||_mstalt="431392" _mstvisible="3" height="139" width="727"]]
248 248  
395 +(% _msthash="315255" _msttexthash="871611" _mstvisible="1" %)
249 249  Check the battery voltage for LHT65N.
250 250  
398 +(% _mstvisible="1" %)
251 251  * BAT status=(0Xcba4>>14)&0xFF=11(B)，very good
252 252  * Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV
253 253  
254 -=== 2.4.3 Built-in Temperature ===
402 +(% _mstvisible="1" %)
403 +=== (% _msthash="600769" _msttexthash="565838" _mstvisible="3" %)2.4.3 Built-in Temperature(%%) ===
255 255  
256 -[[image:image-20220522235639-2.png||height="138" width="722"]]
405 +(% _mstvisible="1" %)
406 +[[image:image-20220522235639-2.png||_mstalt="431756" _mstvisible="3" height="138" width="722"]]
257 257  
408 +(% _mstvisible="1" %)
258 258  * Temperature:  0x0ABB/100=27.47℃
259 259  
260 -[[image:image-20220522235639-3.png]]
411 +(% _mstvisible="1" %)
412 +[[image:image-20220522235639-3.png||_mstalt="432120" _mstvisible="3"]]
261 261  
414 +(% _mstvisible="1" %)
262 262  * Temperature:  (0xF5C6-65536)/100=-26.18℃
263 263  
264 -=== 2.4.4 Built-in Humidity ===
417 +(% _mstvisible="1" %)
418 +=== (% _msthash="475891" _msttexthash="445120" _mstvisible="3" %)2.4.4 Built-in Humidity(%%) ===
265 265  
266 -[[image:image-20220522235639-4.png||height="138" width="722"]]
420 +(% _mstvisible="1" %)
421 +[[image:image-20220522235639-4.png||_mstalt="432484" _mstvisible="3" height="138" width="722"]]
267 267  
423 +(% _mstvisible="1" %)
268 268  * Humidity:    0x025C/10=60.4%
269 269  
270 -=== 2.4.5 Ext # ===
426 +(% _mstvisible="1" %)
427 +=== (% _msthash="116532" _msttexthash="87958" _mstvisible="3" %)2.4.5 Ext #(%%) ===
271 271  
429 +(% _msthash="315256" _msttexthash="552240" _mstvisible="1" %)
272 272  Bytes for External Sensor:
273 273  
274 -[[image:image-20220523152822-17.png]]
432 +(% _mstvisible="1" %)
433 +[[image:image-20220523152822-17.png||_mstalt="454545" _mstvisible="3"]]
275 275  
276 -=== 2.4.6 Ext value ===
277 277  
278 -==== 2.4.6.1 Ext~=1, E3 Temperature Sensor ====
436 +(% _mstvisible="1" %)
437 +=== (% _msthash="221429" _msttexthash="200655" _mstvisible="3" %)2.4.6 Ext value(%%) ===
279 279  
280 -[[image:image-20220522235639-5.png]]
439 +(% _mstvisible="1" %)
440 +==== (% _msthash="1005901" _msttexthash="877578" _mstvisible="3" %)2.4.6.1 Ext~=1, E3 Temperature Sensor(%%) ====
281 281  
442 +(% _mstvisible="1" %)
443 +[[image:image-20220522235639-5.png||_mstalt="432848" _mstvisible="3"]]
444 +
445 +
446 +(% _mstvisible="1" %)
282 282  * DS18B20 temp=0x0ADD/100=27.81℃
283 283  
449 +(% _msthash="315257" _msttexthash="1038479" _mstvisible="1" %)
284 284  The last 2 bytes of data are meaningless
285 285  
286 -[[image:image-20220522235639-6.png]]
452 +(% _mstvisible="1" %)
453 +[[image:image-20220522235639-6.png||_mstalt="433212" _mstvisible="3"]]
287 287  
455 +
456 +(% _mstvisible="1" %)
288 288  * External temperature= (0xF54F-65536)/100=-27.37℃
289 289  
459 +(% _mstvisible="1" %)
290 290  (((
461 +(% _msthash="506063" _msttexthash="1038479" _mstvisible="2" %)
291 291  The last 2 bytes of data are meaningless
292 292  )))
293 293  
465 +(% _mstvisible="1" %)
294 294  (((
467 +(% _msthash="506064" _msttexthash="21185632" _mstvisible="2" %)
295 295  If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃
296 296  )))
297 297  
298 298  
299 -==== 2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp ====
300 300  
473 +(% _mstvisible="1" %)
474 +==== (% _msthash="1389752" _msttexthash="1234766" _mstvisible="3" %)2.4.6.2 Ext~=9, E3 sensor with Unix Timestamp(%%) ====
475 +
476 +(% _msthash="315258" _msttexthash="41539368" _mstvisible="1" %)
301 301  Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:
302 302  
303 -(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
304 -|(% style="width:96px" %)(((
305 -**Size(bytes)**
306 -)))|(% style="width:71px" %)(((
307 -**2**
308 -)))|(% style="width:99px" %)(((
309 -**2**
310 -)))|(% style="width:132px" %)(((
311 -**2**
312 -)))|(% style="width:54px" %)(((
313 -**1**
314 -)))|(% style="width:64px" %)(((
315 -**4**
479 +(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
480 +(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 96px;" %)(% _mstvisible="5" %)
481 +(((
482 +(% _mstvisible="6" %)
483 +(% _msthash="1817488" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**
484 +)))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
485 +(((
486 +(% _mstvisible="6" %)
487 +(% _msthash="1817489" _msttexthash="4550" _mstvisible="8" %)**2**
488 +)))|=(% _mstvisible="4" style="width: 99px;" %)(% _mstvisible="5" %)
489 +(((
490 +(% _mstvisible="6" %)
491 +(% _msthash="1817490" _msttexthash="4550" _mstvisible="8" %)**2**
492 +)))|=(% _mstvisible="4" style="width: 132px;" %)(% _mstvisible="5" %)
493 +(((
494 +(% _mstvisible="6" %)
495 +(% _msthash="1817491" _msttexthash="4550" _mstvisible="8" %)**2**
496 +)))|=(% _mstvisible="4" style="width: 54px;" %)(% _mstvisible="5" %)
497 +(((
498 +(% _mstvisible="6" %)
499 +(% _msthash="1817492" _msttexthash="4459" _mstvisible="8" %)**1**
500 +)))|=(% _mstvisible="4" style="width: 64px;" %)(% _mstvisible="5" %)
501 +(((
502 +(% _mstvisible="6" %)
503 +(% _msthash="1817493" _msttexthash="4732" _mstvisible="8" %)**4**
316 316  )))
317 -|(% style="width:96px" %)(((
318 -**Value**
319 -)))|(% style="width:71px" %)(((
320 -[[External temperature>>||anchor="H4.2SetExternalSensorMode"]]
321 -)))|(% style="width:99px" %)(((
505 +(% _mstvisible="3" %)|(% _mstvisible="4" style="width:96px" %)(% _mstvisible="5" %)
322 322  (((
323 -[[Built-In>>||anchor="H2.4.3Built-inTemperature"]]
507 +(% _mstvisible="6" %)
508 +(% _msthash="1817494" _msttexthash="60203" _mstvisible="8" %)**Value**
509 +)))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
510 +(((
511 +(% _mstvisible="6" %)
512 +[[External temperature>>||anchor="H4.2SetExternalSensorMode" _msthash="1817495" _msttexthash="426517" _mstvisible="7"]]
513 +)))|(% _mstvisible="4" style="width:99px" %)(% _mstvisible="5" %)
514 +(((
515 +(% _mstvisible="6" %)
516 +(((
517 +(% _mstvisible="7" %)
518 +[[Built-In>>||anchor="H2.4.3Built-inTemperature" _msthash="2224745" _msttexthash="100464" _mstvisible="8"]]
324 324  )))
325 325  
521 +(% _mstvisible="6" %)
326 326  (((
327 -[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]
523 +(% _mstvisible="7" %)
524 +[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2224746" _msttexthash="184041" _mstvisible="8"]]
328 328  )))
329 -)))|(% style="width:132px" %)(((
526 +)))|(% _mstvisible="4" style="width:132px" %)(% _mstvisible="5" %)
330 330  (((
528 +(% _mstvisible="6" %)
529 +(((
530 +(% _msthash="2224747" _msttexthash="136331" _mstvisible="7" %)
331 331  BAT Status &
332 332  )))
333 333  
534 +(% _mstvisible="6" %)
334 334  (((
335 -[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]
536 +(% _mstvisible="7" %)
537 +[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2224748" _msttexthash="311181" _mstvisible="8"]]
336 336  )))
337 -)))|(% style="width:54px" %)(((
539 +)))|(% _mstvisible="4" style="width:54px" %)(% _mstvisible="5" %)
540 +(((
541 +(% _msthash="1817496" _msttexthash="147225" _mstvisible="6" %)
338 338  Status & Ext
339 -)))|(% style="width:64px" %)(((
543 +)))|(% _mstvisible="4" style="width:64px" %)(% _mstvisible="5" %)
340 340  (((
341 -[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]
545 +(% _mstvisible="6" %)
546 +(((
547 +(% _mstvisible="7" %)
548 +[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2224749" _msttexthash="227175" _mstvisible="8"]]
342 342  )))
343 343  )))
344 344  
345 -* **Battery status & (% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)Built-in Humidity(%%)**
346 346  
347 -(% border="1" style="background-color:#ffffcc; color:green; width:469px" %)
348 -|(% style="width:65px" %)Bit(bit)|(% style="width:267px" %)[15:14]|(% style="width:134px" %)[11:0]
349 -|(% style="width:65px" %)Value|(% style="width:267px" %)(((
553 +(% _mstvisible="1" %)
554 +* (% _msthash="2539669" _msttexthash="857922" _mstvisible="3" %)**Battery status & **(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**
555 +
556 +(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:469px" %)
557 +(% _mstvisible="3" %)|=(% _msthash="1230918" _msttexthash="93158" _mstvisible="4" style="width: 65px;" %)Bit(bit)|=(% _msthash="1230919" _msttexthash="57954" _mstvisible="4" style="width: 267px;" %)[15:14]|=(% _msthash="1230920" _msttexthash="48022" _mstvisible="4" style="width: 134px;" %)[11:0]
558 +(% _mstvisible="3" %)|(% _msthash="1230921" _msttexthash="60203" _mstvisible="4" style="width:65px" %)Value|(% _mstvisible="4" style="width:267px" %)(% _mstvisible="5" %)
559 +(((
560 +(% _msthash="1817497" _msttexthash="128427" _mstvisible="6" %)
350 350  BAT Status
351 351  
563 +(% _msthash="1817498" _msttexthash="472784" _mstvisible="6" %)
352 352  00(b): Ultra Low ( BAT <= 2.50v)
353 353  
566 +(% _msthash="1817499" _msttexthash="483678" _mstvisible="6" %)
354 354  01(b): Low  (2.50v <=BAT <= 2.55v)
355 355  
569 +(% _msthash="1817500" _msttexthash="440791" _mstvisible="6" %)
356 356  10(b): OK   (2.55v <= BAT <=2.65v)
357 357  
572 +(% _msthash="1817501" _msttexthash="334191" _mstvisible="6" %)
358 358  11(b): Good   (BAT >= 2.65v)
359 -)))|(% style="width:134px" %)(((
360 -[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity"]]
574 +)))|(% _mstvisible="4" style="width:134px" %)(% _mstvisible="5" %)
575 +(((
576 +(% _mstvisible="6" %)
577 +[[Built-in Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="1817502" _msttexthash="311181" _mstvisible="7"]]
361 361  
579 +(% _mstvisible="6" %)
362 362  
363 363  )))
364 364  
365 -* **Status & Ext Byte**
366 366  
367 -[[image:image-20220523152434-16.png]]
584 +(% _mstvisible="1" %)
585 +* (% _msthash="504956" _msttexthash="245037" _mstvisible="4" %)**Status & Ext Byte**
368 368  
587 +(% _mstvisible="1" %)
588 +[[image:image-20220523152434-16.png||_mstalt="453921" _mstvisible="3"]]
589 +
590 +(% _mstvisible="1" %)
369 369  * Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.
370 370  * Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.
371 371  * Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)
372 372  
373 -== 2.5 Show data on Datacake ==
374 374  
596 +
597 +(% _mstvisible="1" %)
598 +== (% _msthash="487097" _msttexthash="454818" _mstvisible="3" %)2.5 Show data on Datacake(%%) ==
599 +
600 +(% _msthash="315259" _msttexthash="20933341" _mstvisible="1" %)
375 375  Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:
376 376  
603 +(% _mstvisible="1" %)
377 377  (((
378 -**Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.
605 +(% _msthash="506065" _msttexthash="4753983" _mstvisible="2" %)
606 +(% _mstvisible="3" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.
379 379  )))
380 380  
609 +(% _mstvisible="1" %)
381 381  (((
382 -**Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
611 +(% _msthash="506066" _msttexthash="14696682" _mstvisible="2" %)
612 +(% _mstvisible="3" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.
383 383  )))
384 384  
615 +(% _mstvisible="1" %)
385 385  (((
617 +(% _msthash="506067" _msttexthash="180297" _mstvisible="2" %)
386 386  Add Datacake:
387 387  )))
388 388  
389 -[[image:image-20220523000825-7.png||height="262" width="583"]]
621 +(% _mstvisible="1" %)
622 +[[image:image-20220523000825-7.png||_mstalt="429884" _mstvisible="3" height="262" width="583"]]
390 390  
391 391  
625 +(% _msthash="315260" _msttexthash="750178" _mstvisible="1" %)
392 392  Select default key as Access Key:
393 393  
394 -[[image:image-20220523000825-8.png||height="453" width="406"]]
628 +(% _mstvisible="1" %)
629 +[[image:image-20220523000825-8.png||_mstalt="430248" _mstvisible="3" height="453" width="406"]]
395 395  
396 -In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT65 device.
631 +(% _msthash="315261" _msttexthash="2134964" _mstvisible="1" %)
632 +In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/||_mstvisible="2"]]) , add LHT65 device.
397 397  
398 -[[image:image-20220523000825-9.png||height="366" width="392"]]
634 +(% _mstvisible="1" %)
635 +[[image:image-20220523000825-9.png||_mstalt="430612" _mstvisible="3" height="366" width="392"]]
399 399  
400 -[[image:image-20220523000825-10.png||height="413" width="728"]]
637 +(% _mstvisible="1" %)
638 +[[image:image-20220523000825-10.png||_mstalt="450619" _mstvisible="3" height="413" width="728"]]
401 401  
402 -== 2.6 Datalog Feature ==
403 403  
641 +
642 +(% _mstvisible="1" %)
643 +== (% _msthash="350454" _msttexthash="323544" _mstvisible="3" %)2.6 Datalog Feature(%%) ==
644 +
645 +(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)
404 404  Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, LHT65N will store the reading for future retrieving purposes. There are two ways for IoT servers to get datalog from LHT65N.
405 405  
406 -=== 2.6.1 Ways to get datalog via LoRaWAN ===
407 407  
649 +(% _mstvisible="1" %)
650 +=== (% _msthash="886158" _msttexthash="842426" _mstvisible="3" %)2.6.1 Ways to get datalog via LoRaWAN(%%) ===
651 +
652 +(% _msthash="315263" _msttexthash="409604" _mstvisible="1" %)
408 408  There are two methods:
409 409  
655 +(% _mstvisible="1" %)
410 410  1. IoT Server sends a downlink LoRaWAN command to [[poll the value>>||anchor="H2.6.4Pollsensorvalue"]] for specify time range.
411 411  1. Set [[PNACKMD=1>>||anchor="H4.13AutoSendNone-ACKmessages"]], LHT65N will wait for ACK for every uplink, when there is no LoRaWAN network, LHT65N will store the sensor data, and it will send all messages after network recover.
412 412  
413 -=== 2.6.2 Unix TimeStamp ===
414 414  
660 +
661 +(% _mstvisible="1" %)
662 +=== (% _msthash="369915" _msttexthash="342797" _mstvisible="3" %)2.6.2 Unix TimeStamp(%%) ===
663 +
664 +(% _msthash="315264" _msttexthash="1182285" _mstvisible="1" %)
415 415  LHT65N uses Unix TimeStamp format based on
416 416  
417 -[[image:image-20220523001219-11.png||height="97" width="627"]]
667 +(% _mstvisible="1" %)
668 +[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]
418 418  
419 419  
671 +(% _mstvisible="1" %)
420 420  (((
421 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
673 +(% _msthash="506068" _msttexthash="2717234" _mstvisible="2" %)
674 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :
422 422  )))
423 423  
677 +(% _mstvisible="1" %)
424 424  (((
679 +(% _msthash="506069" _msttexthash="709813" _mstvisible="2" %)
425 425  Below is the converter example
426 426  )))
427 427  
428 -[[image:image-20220523001219-12.png||height="298" width="720"]]
683 +(% _mstvisible="1" %)
684 +[[image:image-20220523001219-12.png||_mstalt="450827" _mstvisible="3" height="298" width="720"]]
429 429  
686 +(% _msthash="315265" _msttexthash="15137317" _mstvisible="1" %)
430 430  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
431 431  
432 -=== 2.6.3 Set Device Time ===
433 433  
690 +(% _mstvisible="1" %)
691 +=== (% _msthash="359294" _msttexthash="332748" _mstvisible="3" %)2.6.3 Set Device Time(%%) ===
692 +
693 +(% _mstvisible="1" %)
434 434  (((
695 +(% _msthash="506070" _msttexthash="4521946" _mstvisible="2" %)
435 435  There are two ways to set device’s time:
436 436  )))
437 437  
699 +(% _mstvisible="1" %)
438 438  (((
439 -**~1. Through LoRaWAN MAC Command (Default settings)**
701 +(% _mstvisible="2" %)
702 +(% _msthash="506071" _msttexthash="1498471" _mstvisible="4" %)**1. Through LoRaWAN MAC Command (Default settings)**
440 440  )))
441 441  
705 +(% _mstvisible="1" %)
442 442  (((
707 +(% _msthash="506072" _msttexthash="2126267" _mstvisible="2" %)
443 443  User need to set SYNCMOD=1 to enable sync time via MAC command.
444 444  )))
445 445  
711 +(% _mstvisible="1" %)
446 446  (((
713 +(% _msthash="506073" _msttexthash="54430324" _mstvisible="2" %)
447 447  Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
448 448  )))
449 449  
717 +(% _mstvisible="1" %)
450 450  (((
719 +(% _msthash="506074" _msttexthash="92531127" _mstvisible="2" %)
451 451  Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
452 452  )))
453 453  
723 +(% _mstvisible="1" %)
454 454  (((
725 +(% _mstvisible="2" %)
455 455  
456 456  )))
457 457  
729 +(% _mstvisible="1" %)
458 458  (((
459 -**2. Manually Set Time**
731 +(% _mstvisible="2" %)
732 +(% _msthash="506075" _msttexthash="329719" _mstvisible="4" %)**2. Manually Set Time**
460 460  )))
461 461  
735 +(% _mstvisible="1" %)
462 462  (((
737 +(% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
463 463  User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.
739 +
740 +(% _msthash="506076" _msttexthash="7889297" _mstvisible="2" %)
741 +
464 464  )))
465 465  
466 -=== 2.6.4 Poll sensor value ===
744 +(% _mstvisible="1" %)
745 +=== (% _msthash="460759" _msttexthash="430001" _mstvisible="3" %)2.6.4 Poll sensor value(%%) ===
467 467  
747 +(% _msthash="315266" _msttexthash="4955821" _mstvisible="1" %)
468 468  User can poll sensor value based on timestamps from the server. Below is the downlink command.
469 469  
470 -[[image:image-20220523152302-15.png]]
750 +(% _mstvisible="1" %)
751 +[[image:image-20220523152302-15.png||_mstalt="451581" _mstvisible="3"]]
471 471  
753 +(% _mstvisible="1" %)
472 472  (((
755 +(% _msthash="506077" _msttexthash="14670916" _mstvisible="2" %)
473 473  Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.
474 474  )))
475 475  
759 +(% _mstvisible="1" %)
476 476  (((
477 -For example, downlink command (% style="display:none" %) (%%)**31 5FC5F350 5FC6 0160 05**
761 +(% _mstvisible="2" %)
762 +For example, downlink command (% _mstmutation="1" %)**31 5FC5F350 5FC6 0160 05**(% _mstvisible="3" style="display:none" %)
478 478  )))
479 479  
765 +(% _mstvisible="1" %)
480 480  (((
767 +(% _msthash="506078" _msttexthash="6907459" _mstvisible="2" %)
481 481  Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data
482 482  )))
483 483  
771 +(% _mstvisible="1" %)
484 484  (((
773 +(% _msthash="506079" _msttexthash="23531573" _mstvisible="2" %)
485 485  Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.
486 486  )))
487 487  
488 488  
489 -=== 2.6.5 Datalog Uplink payload ===
778 +(% _mstvisible="1" %)
779 +=== (% _msthash="650923" _msttexthash="614185" _mstvisible="3" %)2.6.5 Datalog Uplink payload(%%) ===
490 490  
781 +(% _msthash="315267" _msttexthash="2245087" _mstvisible="1" %)
491 491  The Datalog poll reply uplink will use below payload format.
492 492  
784 +(% _mstvisible="1" %)
493 493  (((
494 -**Retrieval data payload**
786 +(% _mstvisible="2" %)
787 +(% _msthash="506080" _msttexthash="451581" _mstvisible="4" %)**Retrieval data payload**
495 495  )))
496 496  
497 -(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
498 -|(% style="width:93px" %)(((
790 +(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
791 +(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 93px;" %)(% _mstvisible="5" %)
499 499  (((
500 -**Size(bytes)**
793 +(% _mstvisible="6" %)
794 +(((
795 +(% _mstvisible="7" %)
796 +(% _msthash="2224750" _msttexthash="161122" _mstvisible="9" %)**Size(bytes)**
501 501  )))
502 -)))|(% style="width:71px" %)(((
798 +)))|=(% _mstvisible="4" style="width: 71px;" %)(% _mstvisible="5" %)
503 503  (((
504 -**2**
800 +(% _mstvisible="6" %)
801 +(((
802 +(% _mstvisible="7" %)
803 +(% _msthash="2224751" _msttexthash="4550" _mstvisible="9" %)**2**
505 505  )))
506 -)))|(% style="width:102px" %)(((
805 +)))|=(% _mstvisible="4" style="width: 102px;" %)(% _mstvisible="5" %)
507 507  (((
508 -**2**
807 +(% _mstvisible="6" %)
808 +(((
809 +(% _mstvisible="7" %)
810 +(% _msthash="2224752" _msttexthash="4550" _mstvisible="9" %)**2**
509 509  )))
510 -)))|(% style="width:86px" %)(((
812 +)))|=(% _mstvisible="4" style="width: 86px;" %)(% _mstvisible="5" %)
511 511  (((
512 -**2**
814 +(% _mstvisible="6" %)
815 +(((
816 +(% _mstvisible="7" %)
817 +(% _msthash="2224753" _msttexthash="4550" _mstvisible="9" %)**2**
513 513  )))
514 -)))|(% style="width:86px" %)(((
819 +)))|=(% _mstvisible="4" style="width: 86px;" %)(% _mstvisible="5" %)
515 515  (((
516 -**1**
821 +(% _mstvisible="6" %)
822 +(((
823 +(% _mstvisible="7" %)
824 +(% _msthash="2224754" _msttexthash="4459" _mstvisible="9" %)**1**
517 517  )))
518 -)))|(% style="width:48px" %)(((
826 +)))|=(% _mstvisible="4" style="width: 48px;" %)(% _mstvisible="5" %)
519 519  (((
520 -**4**
828 +(% _mstvisible="6" %)
829 +(((
830 +(% _mstvisible="7" %)
831 +(% _msthash="2224755" _msttexthash="4732" _mstvisible="9" %)**4**
521 521  )))
522 522  )))
523 -|(% style="width:93px" %)(((
834 +(% _mstvisible="3" %)|(% _mstvisible="4" style="width:93px" %)(% _mstvisible="5" %)
524 524  (((
525 -**Value**
836 +(% _mstvisible="6" %)
837 +(((
838 +(% _mstvisible="7" %)
839 +(% _msthash="2224756" _msttexthash="60203" _mstvisible="9" %)**Value**
526 526  )))
527 -)))|(% style="width:71px" %)(((
841 +)))|(% _mstvisible="4" style="width:71px" %)(% _mstvisible="5" %)
528 528  (((
529 -[[External sensor data>>||anchor="H2.4.6Extvalue"]]
843 +(% _mstvisible="6" %)
844 +(((
845 +(% _mstvisible="7" %)
846 +[[External sensor data>>||anchor="H2.4.6Extvalue" _msthash="2224757" _msttexthash="386672" _mstvisible="8"]]
530 530  )))
531 -)))|(% style="width:102px" %)(((
848 +)))|(% _mstvisible="4" style="width:102px" %)(% _mstvisible="5" %)
532 532  (((
850 +(% _mstvisible="6" %)
533 533  (((
534 -[[Built In>>||anchor="H2.4.3Built-inTemperature"]]
852 +(% _mstvisible="7" %)
853 +(((
854 +(% _mstvisible="8" %)
855 +[[Built In>>||anchor="H2.4.3Built-inTemperature" _msthash="2671864" _msttexthash="91065" _mstvisible="9"]]
535 535  )))
536 536  )))
537 537  
859 +(% _mstvisible="6" %)
538 538  (((
861 +(% _mstvisible="7" %)
539 539  (((
540 -[[Temperature>>||anchor="H2.4.3Built-inTemperature"]]
863 +(% _mstvisible="8" %)
864 +[[Temperature>>||anchor="H2.4.3Built-inTemperature" _msthash="2671865" _msttexthash="184041" _mstvisible="9"]]
541 541  )))
542 542  )))
543 -)))|(% style="width:86px" %)(((
867 +)))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
544 544  (((
869 +(% _mstvisible="6" %)
545 545  (((
546 -[[Built-in>>||anchor="H2.4.4Built-inHumidity"]]
871 +(% _mstvisible="7" %)
872 +(((
873 +(% _mstvisible="8" %)
874 +[[Built-in>>||anchor="H2.4.4Built-inHumidity" _msthash="2671866" _msttexthash="105872" _mstvisible="9"]]
547 547  )))
548 548  )))
549 549  
878 +(% _mstvisible="6" %)
550 550  (((
880 +(% _mstvisible="7" %)
551 551  (((
552 -[[Humidity>>||anchor="H2.4.4Built-inHumidity"]]
882 +(% _mstvisible="8" %)
883 +[[Humidity>>||anchor="H2.4.4Built-inHumidity" _msthash="2671867" _msttexthash="117429" _mstvisible="9"]]
553 553  )))
554 554  )))
555 -)))|(% style="width:86px" %)(((
886 +)))|(% _mstvisible="4" style="width:86px" %)(% _mstvisible="5" %)
556 556  (((
888 +(% _mstvisible="6" %)
889 +(((
890 +(% _msthash="2224758" _msttexthash="390390" _mstvisible="7" %)
557 557  Poll message flag & Ext
558 558  )))
559 -)))|(% style="width:48px" %)(((
893 +)))|(% _mstvisible="4" style="width:48px" %)(% _mstvisible="5" %)
560 560  (((
895 +(% _mstvisible="6" %)
561 561  (((
562 -[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp"]]
897 +(% _mstvisible="7" %)
898 +(((
899 +(% _mstvisible="8" %)
900 +[[Unix Time Stamp>>||anchor="H2.6.2UnixTimeStamp" _msthash="2671868" _msttexthash="227175" _mstvisible="9"]]
563 563  )))
564 564  )))
565 565  
904 +(% _mstvisible="6" %)
566 566  (((
906 +(% _mstvisible="7" %)
567 567  (((
908 +(% _mstvisible="8" %)
568 568  
569 569  )))
570 570  )))
571 571  )))
572 572  
573 -**Poll message flag & Ext**
914 +(% _mstvisible="1" %)
915 +(% _msthash="315268" _msttexthash="390390" _mstvisible="3" %)**Poll message flag & Ext**
574 574  
575 -[[image:image-20220523152208-14.png]]
917 +(% _mstvisible="1" %)
918 +[[image:image-20220523152208-14.png||_mstalt="452920" _mstvisible="3"]]
576 576  
920 +(% _mstvisible="1" %)
577 577  (((
922 +(% _mstvisible="2" %)
578 578  (((
924 +(% _msthash="736723" _msttexthash="2005003" _mstvisible="3" %)
579 579  Poll Message Flag: 1: This message is a poll message reply.
580 580  )))
581 581  )))
582 582  
583 -* (((
929 +(% _mstvisible="1" %)
930 +* (% _mstvisible="3" %)
584 584  (((
932 +(% _mstvisible="4" %)
933 +(((
934 +(% _msthash="1197157" _msttexthash="561548" _mstvisible="5" %)
585 585  Poll Message Flag is set to 1.
586 586  )))
587 587  )))
588 -* (((
938 +* (% _mstvisible="3" %)
589 589  (((
940 +(% _mstvisible="4" %)
941 +(((
942 +(% _msthash="1197158" _msttexthash="9284964" _mstvisible="5" %)
590 590  Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
591 591  )))
592 592  )))
593 593  
947 +(% _mstvisible="1" %)
594 594  (((
949 +(% _mstvisible="2" %)
595 595  (((
951 +(% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
952 +
953 +
954 +(% _msthash="736724" _msttexthash="2242344" _mstvisible="3" %)
596 596  For example, in US915 band, the max payload for different DR is:
597 597  )))
598 598  )))
599 599  
959 +(% _mstvisible="1" %)
600 600  (((
961 +(% _mstvisible="2" %)
601 601  (((
963 +(% _msthash="736725" _msttexthash="1065532" _mstvisible="3" %)
602 602  a) DR0: max is 11 bytes so one entry of data
603 603  )))
604 604  )))
605 605  
968 +(% _mstvisible="1" %)
606 606  (((
970 +(% _mstvisible="2" %)
607 607  (((
972 +(% _msthash="736726" _msttexthash="3265665" _mstvisible="3" %)
608 608  b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
609 609  )))
610 610  )))
611 611  
977 +(% _mstvisible="1" %)
612 612  (((
979 +(% _mstvisible="2" %)
613 613  (((
981 +(% _msthash="736727" _msttexthash="1454115" _mstvisible="3" style="text-align: left;" %)
614 614  c) DR2: total payload includes 11 entries of data
615 615  )))
616 616  )))
617 617  
986 +(% _mstvisible="1" %)
618 618  (((
988 +(% _mstvisible="2" %)
619 619  (((
990 +(% _msthash="736728" _msttexthash="1483924" _mstvisible="3" style="text-align: left;" %)
620 620  d) DR3: total payload includes 22 entries of data.
621 621  )))
622 622  )))
623 623  
995 +(% _mstvisible="1" %)
624 624  (((
997 +(% _mstvisible="2" %)
625 625  (((
999 +(% _msthash="736729" _msttexthash="5848349" _mstvisible="3" style="text-align: left;" %)
626 626  If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0   
627 627  )))
628 628  )))
629 629  
630 630  
631 -**Example:**
1005 +(% _mstvisible="1" style="text-align: left;" %)
1006 +(% _msthash="315269" _msttexthash="104767" _mstvisible="3" %)**Example:**
632 632  
1008 +(% _msthash="315270" _msttexthash="913822" _mstvisible="1" style="text-align: left;" %)
633 633  If LHT65N has below data inside Flash:
634 634  
635 -[[image:image-20220523144455-1.png||height="335" width="735"]]
1011 +(% _mstvisible="1" %)
1012 +[[image:image-20220523144455-1.png||_mstalt="430040" _mstvisible="3" height="335" width="735"]]
636 636  
1014 +(% _mstvisible="1" %)
637 637  (((
638 -If user sends below downlink command: (% style="background-color:yellow" %)3160065F9760066DA705
1016 +(% _msthash="506081" _msttexthash="1663961" _mstvisible="2" style="text-align: left;" %)
1017 +If user sends below downlink command: (% _mstvisible="3" style="background-color:yellow" %)3160065F9760066DA705
639 639  )))
640 640  
1020 +(% _mstvisible="1" %)
641 641  (((
1022 +(% _msthash="506082" _msttexthash="1092494" _mstvisible="2" style="text-align: left;" %)
642 642   Where : Start time: 60065F97 = time 21/1/19 04:27:03
643 643  )))
644 644  
1026 +(% _mstvisible="1" %)
645 645  (((
646 - Stop time 60066DA7= time 21/1/19 05:27:03
1028 +(% _msthash="506083" _msttexthash="737269" _mstvisible="2" style="text-align: left;" %)
1029 + Stop time 60066DA7= time 21/1/19 05:27:(% _msthash="903005" _msttexthash="9672" _mstvisible="2" %)03
647 647  )))
648 648  
1032 +(% _mstvisible="1" %)
649 649  (((
1034 +(% _mstvisible="2" %)
650 650  
651 651  )))
652 652  
1038 +(% _mstvisible="1" %)
653 653  (((
1040 +(% _msthash="506084" _msttexthash="751218" _mstvisible="2" style="text-align: left;" %)
654 654  LHT65N will uplink this payload.
655 655  )))
656 656  
657 -[[image:image-20220523001219-13.png||height="421" width="727"]]
1044 +(% _mstvisible="1" %)
1045 +[[image:image-20220523001219-13.png||_mstalt="451204" _mstvisible="3" height="421" style="text-align:left" width="727"]]
658 658  
1047 +(% _msthash="315271" _msttexthash="12012546" _mstvisible="1" style="text-align: left;" %)
659 659  7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
660 660  
661 661  Where the first 11 bytes is for the first entry:
... ... @@ -673,71 +673,101 @@
673 673  Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03
674 674  
675 675  
676 -== 2.7 Alarm Mode ==
1065 +(% _mstvisible="1" style="text-align: left;" %)
1066 +== (% _msthash="244504" _msttexthash="177736" _mstvisible="3" %)2.7 Alarm Mode(%%) ==
677 677  
678 -Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.
1068 +(% _msthash="315279" _msttexthash="16493308" _mstvisible="1" style="text-align: left;" %)
1069 +when the device is in alarm mode, it checks the built-in sensor temperature for a short time. if the temperature exceeds the preconfigured range, it sends an uplink immediately.
679 679  
1071 +(% _mstvisible="1" %)
680 680  (((
681 -(% style="color:red" %)Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.
1073 +(% _mstvisible="2" style="text-align: left;" %)
1074 +(% _msthash="506085" _msttexthash="8782189" _mstvisible="3" style="color:red" %)note: alarm mode adds a little power consumption, and we recommend extending the normal read time when this feature is enabled.
682 682  )))
683 683  
684 -**AT Commands for Alarm mode:**
1077 +(% _mstvisible="1" style="text-align: left;" %)
1078 +(% _msthash="315280" _msttexthash="363480" _mstvisible="3" %)**AT COMMAND FOR ALARM MODE:**
685 685  
686 -(% class="box infomessage" %)
1080 +(% _mstvisible="1" class="box infomessage" %)
687 687  (((
688 -**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)
689 -(% class="box infomessage" %)**AT**(%%)**+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)
1082 +(% _msthash="506086" _msttexthash="2193529" _mstvisible="2" style="text-align: left;" %)
1083 +(% _istranslated="1" _mstmutation="1" _mstvisible="4" %)**AT+WMOD=1**(%%): Enable/disable alarm mode. (0: Disabled, 1: Enabled)
690 690  
691 -(% class="box infomessage" %)**AT+ARTEMP:**(%%) Get or set the internal Temperature sensor alarm range
1085 +(% _msthash="506087" _msttexthash="3671265" _mstvisible="2" style="text-align: left;" %)
1086 +(% _istranslated="1" _mstvisible="4" %)**AT+CITEMP=1**(%%): The interval between checking the alarm temperature. (In minutes)
692 692  
693 -AT
1088 +(% _msthash="506088" _msttexthash="3310437" _mstvisible="2" style="text-align: left;" %)
1089 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP**(%%): Gets or sets the alarm range of the internal temperature sensor
1090 +
1091 +(% _mstvisible="2" style="text-align: left;" %)
1092 +(% _istranslated="1" _mstmutation="1" %)**AT+ARTEMP=？ **(%%): Gets the alarm range of the internal temperature sensor(% _mstvisible="3" style="display:none" %)
1093 +
1094 +(% _msthash="506089" _msttexthash="3590067" _mstvisible="2" style="text-align: left;" %)
1095 +(% _istranslated="1" _mstvisible="4" %)**AT+ARTEMP=45,105**(%%): Set the internal temperature sensor alarm range from 45 to 105.
694 694  )))
695 695  
696 -(% class="wikigeneratedid" %)
697 -== ==
698 698  
699 -== 2.8 LED Indicator ==
700 700  
701 -(((
702 -The LHT65N has a triple color LED which for easy shows different stage.
703 -)))
1100 +(% _msthash="72514" _msttexthash="253149" _mstvisible="1" style="text-align: left;" %)
1101 +== (% _istranslated="1" _msthash="168103" _msttexthash="59969" _mstvisible="3" %)2.8 (%%)LED Indicator ==
704 704  
1103 +(% _mstvisible="1" %)
705 705  (((
706 -While pressing ACT button, the LED will work as per LED status with ACT button.
1105 +(% _msthash="197769" _msttexthash="2924142" style="text-align: left;" %)
1106 +The LHT65 has a triple color LED which for easy showing different stage .
1107 +
1108 +(% _msthash="289211" _msttexthash="3402659" style="text-align: left;" %)
1109 +While user press ACT button, the LED will work as per LED status with ACT button.
707 707  )))
708 708  
1112 +(% _mstvisible="1" %)
709 709  (((
1114 +(% _msthash="506092" _msttexthash="521573" _mstvisible="2" style="text-align: left;" %)
710 710  In a normal working state:
711 711  )))
712 712  
713 -* (((
714 -For each uplink, the BLUE LED or RED LED will blink once.
1118 +(% _mstvisible="1" %)
1119 +* (% _mstvisible="3" %)
1120 +(((
1121 +(% _msthash="903005" _msttexthash="1647204" _mstvisible="4" %)
1122 +For each uplink, the BLUE LED or RED LED will blink (% _msthash="903005" _msttexthash="46254" _mstvisible="3" %)once(%%).(% style="display:none" %)
1123 +
1124 +(% _msthash="197771" _msttexthash="1202526" %)
1125 +(% _msthash="903005" _msttexthash="1647204" _mstvisible="3" %)BLUE LED when external sensor is connected
715 715  )))
716 -* (((
717 -BLUE LED when an external sensor is connected
1127 +* (% _mstvisible="3" %)
1128 +(((
1129 +(% _msthash="903007" _msttexthash="1334749" _mstvisible="4" %)
1130 +RED LED when external sensor is not connected
718 718  )))
719 -* (((
720 -RED LED when an external sensor is not connected
721 -)))
722 -* (((
1132 +* (% _mstvisible="3" %)
1133 +(((
1134 +(% _msthash="903008" _msttexthash="1875640" _mstvisible="4" %)
723 723  For each success downlink, the PURPLE LED will blink once
724 724  )))
725 725  
726 -----
727 727  
728 -== 2.9 Installation ==
1139 +(% _mstvisible="1" style="text-align: left;" %)
1140 +== (% _msthash="112034" _msttexthash="277511" _mstvisible="3" %)2.9 installation(%%) ==
729 729  
730 -[[image:image-20220516231650-1.png||height="436" width="428"]]
1142 +(% _mstvisible="1" %)
1143 +[[image:image-20220516231650-1.png||_mstalt="428597" _mstvisible="3" height="436" width="428"]]
731 731  
732 -= 3. Sensors & Accessories =
733 733  
734 -== 3.1 E3 Temperature Probe ==
1146 +(% _msthash="604150" _msttexthash="563212" _mstvisible="1" style="text-align: left;" %)
1147 += (% _msthash="401388" _msttexthash="566956" _mstvisible="3" %)3. S(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ensors(% _msthash="401388" _msttexthash="40417" _mstvisible="3" %) and A(% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)ccessories(%%) =
735 735  
736 -[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]
1149 +(% _msthidden="1" _mstvisible="1" style="text-align: left;" %)
1150 +== (% _msthash="903005" _msttexthash="1647204" _mstvisible="2" %)3.1(%%) E3 Temperature Probe ==
737 737  
1152 +(% _mstvisible="1" %)
1153 +[[image:image-20220515080154-4.png||_mstalt="434681" _mstvisible="3" alt="photo-20220515080154-4.png" height="182" width="161"]] [[image:image-20220515080330-5.png||_mstalt="428792" _mstvisible="3" height="201" width="195"]]
738 738  
739 -With Temperature sensor with 2 meters cable long
740 740  
1156 +(% _msthash="315354" _msttexthash="1270971" _mstvisible="1" style="text-align: left;" %)
1157 +Temperature sensor with 2 meters cable long
1158 +
1159 +(% _mstvisible="1" %)
741 741  * Resolution: 0.0625 °C
742 742  * ±0.5°C accuracy from -10°C to +85°C
743 743  * ±2°C accuracy from -55°C to +125°C
... ... @@ -745,387 +745,832 @@
745 745  * -55°C to 125°C
746 746  * Working voltage 2.35v ~~ 5v
747 747  
748 -= 4. Configure LHT65N via AT Command or LoRaWAN Downlink =
749 749  
1168 +
1169 +(% _mstvisible="1" style="text-align: left;" %)
1170 += (% _msthash="1940107" _msttexthash="1714063" _mstvisible="3" %)4. Configure LHT65N via AT command or LoRaWAN downlink(%%) =
1171 +
1172 +(% _mstvisible="1" %)
750 750  (((
1174 +(% _msthash="506246" _msttexthash="2005926" _mstvisible="2" style="text-align: left;" %)
751 751  Use can configure LHT65N via AT Command or LoRaWAN Downlink.
752 752  )))
753 753  
754 -* (((
755 -AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].
1178 +(% _mstvisible="1" %)
1179 +* (% _mstvisible="3" %)
1180 +(((
1181 +(% _msthash="903318" _msttexthash="635544" _mstvisible="4" %)
1182 +AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].
756 756  )))
757 -* (((
758 -LoRaWAN Downlink instruction for different platforms:
1184 +* (% _mstvisible="3" %)
1185 +(((
1186 +(% _msthash="903319" _msttexthash="2004301" _mstvisible="4" %)
1187 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
759 759  )))
760 760  
1190 +(% _mstvisible="1" %)
761 761  (((
762 -[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]
1192 +(% _mstvisible="2" style="text-align: left;" %)
1193 +
763 763  )))
764 764  
1196 +(% _mstvisible="1" %)
765 765  (((
1198 +(% _msthash="506248" _msttexthash="2144051" _mstvisible="2" style="text-align: left;" %)
766 766  There are two kinds of commands to configure LHT65N, they are:
767 767  )))
768 768  
1202 +(% _mstvisible="1" %)
769 769  (((
770 -(% style="color:#4f81bd" %)* **General Commands**.
1204 +(% _mstvisible="2" style="text-align: left;" %)
1205 +(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %)* (% _msthash="506249" _msttexthash="317850" _mstvisible="4" style="color:#4f81bd" %)**General Commands**(% _msthash="506249" _msttexthash="317850" _mstvisible="3" style="color:#4f81bd" %).
771 771  )))
772 772  
1208 +(% _mstvisible="1" %)
773 773  (((
1210 +(% _msthash="506250" _msttexthash="774527" _mstvisible="2" style="text-align: left;" %)
774 774  These commands are to configure:
775 775  )))
776 776  
777 -* (((
1214 +(% _mstvisible="1" %)
1215 +* (% _mstvisible="3" %)
1216 +(((
1217 +(% _msthash="903320" _msttexthash="1503580" _mstvisible="4" %)
778 778  General system settings like: uplink interval.
779 779  )))
780 -* (((
1220 +* (% _mstvisible="3" %)
1221 +(((
1222 +(% _msthash="903321" _msttexthash="1244334" _mstvisible="4" %)
781 781  LoRaWAN protocol & radio-related commands.
782 782  )))
783 783  
1226 +(% _mstvisible="1" %)
784 784  (((
785 -They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:
1228 +(% _msthash="506251" _msttexthash="8343023" _mstvisible="2" style="text-align: left;" %)
1229 +They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]
786 786  )))
787 787  
1232 +(% _mstvisible="1" %)
788 788  (((
789 -[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]
1234 +(% _mstvisible="2" style="text-align: left;" %)
1235 +
790 790  )))
791 791  
1238 +(% _mstvisible="1" %)
792 792  (((
793 -(% style="color:#4f81bd" %)* **Commands special design for LHT65N**
1240 +(% _mstvisible="2" style="text-align: left;" %)
1241 +(% _mstvisible="3" style="color:#4f81bd" %)* **Commands special design for LHT65N**
794 794  )))
795 795  
1244 +(% _mstvisible="1" %)
796 796  (((
1246 +(% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
797 797  These commands are only valid for LHT65N, as below:
1248 +
1249 +(% _msthash="506254" _msttexthash="1501357" _mstvisible="2" style="text-align: left;" %)
1250 +
798 798  )))
799 799  
800 -== 4.1 Set Transmit Interval Time ==
1253 +(% _mstvisible="1" style="text-align: left;" %)
1254 +== (% _msthash="708253" _msttexthash="668772" _mstvisible="3" %)4.1 Set Transmit Interval Time(%%) ==
801 801  
1256 +(% _msthash="315355" _msttexthash="1659268" _mstvisible="1" style="text-align: left;" %)
802 802  Feature: Change LoRaWAN End Node Transmit Interval.
803 803  
804 -**AT Command: AT+TDC**
1259 +(% _mstvisible="1" style="text-align: left;" %)
1260 +(% style="color:#4f81bd" %)**AT Command: AT+TDC**
805 805  
806 -[[image:image-20220523150701-2.png]]
1262 +(% _mstvisible="1" %)
1263 +[[image:image-20220523150701-2.png||_mstalt="427453" _mstvisible="3"]]
807 807  
1265 +(% _mstvisible="1" %)
808 808  (((
809 -**Downlink Command: 0x01**
1267 +(% _mstvisible="2" style="text-align: left;" %)
1268 +
1269 +
1270 +(% _mstvisible="2" style="text-align: left;" %)
1271 +(% style="color:#4f81bd" %)**Downlink Command: 0x01**
810 810  )))
811 811  
1274 +(% _mstvisible="1" %)
812 812  (((
1276 +(% _msthash="506256" _msttexthash="1996592" _mstvisible="2" style="text-align: left;" %)
813 813  Format: Command Code (0x01) followed by 3 bytes time value.
814 814  )))
815 815  
1280 +(% _mstvisible="1" %)
816 816  (((
1282 +(% _msthash="506257" _msttexthash="12934649" _mstvisible="2" style="text-align: left;" %)
817 817  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
818 818  )))
819 819  
820 -* (((
821 -**Example 1**: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
1286 +(% _mstvisible="1" %)
1287 +* (% _mstvisible="3" %)
1288 +(((
1289 +(% _msthash="903322" _msttexthash="3250546" _mstvisible="4" %)
1290 +(% _mstvisible="5" %)**Example 1**(%%): Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
822 822  )))
823 -* (((
824 -**Example 2**: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1292 +* (% _mstvisible="3" %)
1293 +(((
1294 +(% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1295 +(% _mstvisible="5" %)**Example 2**(%%): Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
1296 +
1297 +
1298 +(% _msthash="903323" _msttexthash="3253315" _mstvisible="4" %)
1299 +
825 825  )))
826 826  
827 -== 4.2 Set External Sensor Mode ==
1302 +(% _mstvisible="1" style="text-align: left;" %)
1303 +== (% _msthash="614770" _msttexthash="578240" _mstvisible="3" %)4.2 Set External Sensor Mode(%%) ==
828 828  
1305 +(% _msthash="315357" _msttexthash="975117" _mstvisible="1" style="text-align: left;" %)
829 829  Feature: Change External Sensor Mode.
830 830  
831 -**AT Command: AT+EXT**
1308 +(% _mstvisible="1" style="text-align: left;" %)
1309 +(% style="color:#4f81bd" %)**AT Command: AT+EXT**
832 832  
833 -[[image:image-20220523150759-3.png]]
1311 +(% _mstvisible="1" %)
1312 +[[image:image-20220523150759-3.png||_mstalt="432146" _mstvisible="3"]]
834 834  
1314 +(% _mstvisible="1" %)
835 835  (((
836 -**Downlink Command: 0xA2**
1316 +(% _mstvisible="2" style="text-align: left;" %)
1317 +
1318 +
1319 +(% _mstvisible="2" style="text-align: left;" %)
1320 +(% style="color:#4f81bd" %)**Downlink Command: 0xA2**
837 837  )))
838 838  
1323 +(% _mstvisible="1" %)
839 839  (((
1325 +(% _msthash="506259" _msttexthash="395629" _mstvisible="2" style="text-align: left;" %)
840 840  Total bytes: 2 ~~ 5 bytes
841 841  )))
842 842  
1329 +(% _mstvisible="1" %)
843 843  (((
844 -**Example:**
1331 +(% _mstvisible="2" %)
1332 +(% _msthash="506260" _msttexthash="104767" _mstvisible="4" %)**Example:**
845 845  )))
846 846  
847 -* (((
1335 +(% _mstvisible="1" %)
1336 +* (% _mstvisible="3" %)
1337 +(((
1338 +(% _msthash="903324" _msttexthash="934973" _mstvisible="4" %)
848 848  0xA201: Set external sensor type to E1
849 849  )))
850 -* (((
1341 +* (% _mstvisible="3" %)
1342 +(((
1343 +(% _msthash="903325" _msttexthash="354770" _mstvisible="4" %)
851 851  0xA209: Same as AT+EXT=9
852 852  )))
853 -* (((
1346 +* (% _mstvisible="3" %)
1347 +(((
1348 +(% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
854 854  0xA20702003c,Same as AT+SETCNT=60
1350 +
1351 +
1352 +(% _msthash="903326" _msttexthash="639067" _mstvisible="4" %)
1353 +
855 855  )))
856 856  
857 -== 4.3 Enable/Disable uplink Temperature probe ID ==
1356 +(% _mstvisible="1" style="text-align: left;" %)
1357 +== (% _msthash="1562483" _msttexthash="1445717" _mstvisible="3" %)4.3 Enable/Disable uplink Temperature probe ID(%%) ==
858 858  
1359 +(% _msthash="315359" _msttexthash="2977572" _mstvisible="1" style="text-align: left;" %)
859 859  Feature: If PID is enabled, device will send the temperature probe ID on:
860 860  
1362 +(% _mstvisible="1" %)
861 861  * First Packet after OTAA Join
862 862  * Every 24 hours since the first packet.
863 863  
1366 +(% _msthash="315360" _msttexthash="658814" _mstvisible="1" style="text-align: left;" %)
864 864  PID is default set to disable (0)
865 865  
866 -**AT Command:**
1369 +(% _mstvisible="1" style="text-align: left;" %)
1370 +(% style="color:#4f81bd" %)**AT Command:**
867 867  
868 -[[image:image-20220523150928-4.png]]
1372 +(% _mstvisible="1" %)
1373 +[[image:image-20220523150928-4.png||_mstalt="431821" _mstvisible="3"]]
869 869  
870 -**Downlink Command:**
871 871  
1376 +(% _mstvisible="1" style="text-align: left;" %)
1377 +(% style="color:#4f81bd" %)**Downlink Command:**
1378 +
1379 +(% _mstvisible="1" %)
872 872  * 0xA800  **~-~->** AT+PID=0
873 873  * 0xA801     **~-~->** AT+PID=1
874 874  
875 -== 4.4 Set Password ==
876 876  
1384 +
1385 +(% _mstvisible="1" style="text-align: left;" %)
1386 +== (% _msthash="266344" _msttexthash="242879" _mstvisible="3" %)4.4 Set Password(%%) ==
1387 +
1388 +(% _msthash="315363" _msttexthash="1170728" _mstvisible="1" style="text-align: left;" %)
877 877  Feature: Set device password, max 9 digits
878 878  
879 -**AT Command: AT+PWORD**
1391 +(% _mstvisible="1" style="text-align: left;" %)
1392 +(% style="color:#4f81bd" %)**AT Command: AT+PWORD**
880 880  
881 -[[image:image-20220523151052-5.png]]
1394 +(% _mstvisible="1" %)
1395 +[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]
882 882  
1397 +(% _mstvisible="1" %)
883 883  (((
884 -**Downlink Command:**
1399 +(% _mstvisible="2" style="text-align: left;" %)
1400 +
1401 +
1402 +(% _mstvisible="2" style="text-align: left;" %)
1403 +(% style="color:#4f81bd" %)**Downlink Command:**
885 885  )))
886 886  
1406 +(% _mstvisible="1" %)
887 887  (((
1408 +(% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
888 888  No downlink command for this feature.
1410 +
1411 +(% _msthash="506262" _msttexthash="974311" _mstvisible="2" style="text-align: left;" %)
1412 +
889 889  )))
890 890  
891 -== 4.5 Quit AT Command ==
1415 +(% _mstvisible="1" style="text-align: left;" %)
1416 +== (% _msthash="306956" _msttexthash="281918" _mstvisible="3" %)4.5 Quit AT Command(%%) ==
892 892  
1418 +(% _msthash="315365" _msttexthash="4616456" _mstvisible="1" style="text-align: left;" %)
893 893  Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.
894 894  
895 -**AT Command: AT+DISAT**
1421 +(% _mstvisible="1" style="text-align: left;" %)
1422 +(% style="color:#4f81bd" %)**AT Command: AT+DISAT**
896 896  
897 -[[image:image-20220523151132-6.png]]
1424 +(% _mstvisible="1" %)
1425 +[[image:image-20220523151132-6.png||_mstalt="428649" _mstvisible="3"]]
898 898  
899 -**Downlink Command:**
900 900  
1428 +(% _mstvisible="1" style="text-align: left;" %)
1429 +(% style="color:#4f81bd" %)**Downlink Command:**
1430 +
1431 +(% _msthash="315368" _msttexthash="974311" _mstvisible="1" style="text-align: left;" %)
901 901  No downlink command for this feature.
902 902  
903 -== 4.6 Set to sleep mode ==
904 904  
1435 +(% _mstvisible="1" style="text-align: left;" %)
1436 +== (% _msthash="362752" _msttexthash="334919" _mstvisible="3" %)4.6 Set to sleep mode(%%) ==
1437 +
1438 +(% _msthash="315369" _msttexthash="779688" _mstvisible="1" style="text-align: left;" %)
905 905  Feature: Set device to sleep mode
906 906  
907 -**AT Command: AT+SLEEP**
1441 +(% _mstvisible="1" style="text-align: left;" %)
1442 +(% style="color:#4f81bd" %)**AT Command: AT+SLEEP**
908 908  
909 -[[image:image-20220523151218-7.png]]
1444 +(% _mstvisible="1" %)
1445 +[[image:image-20220523151218-7.png||_mstalt="430703" _mstvisible="3"]]
910 910  
911 -**Downlink Command:**
912 912  
1448 +(% _mstvisible="1" %)
1449 +(% style="color:#4f81bd" %)**Downlink Command:**
1450 +
1451 +(% _mstvisible="1" %)
913 913  * There is no downlink command to set to Sleep mode.
914 914  
915 -== 4.7 Set system time ==
916 916  
1455 +
1456 +(% _mstvisible="1" %)
1457 +== (% _msthash="336557" _msttexthash="309712" _mstvisible="3" %)4.7 Set system time(%%) ==
1458 +
1459 +(% _msthash="315372" _msttexthash="2565524" _mstvisible="1" %)
917 917  Feature: Set system time, unix format. [[See here for format detail.>>||anchor="H2.6.2UnixTimeStamp"]]
918 918  
919 -**AT Command:**
1462 +(% _mstvisible="1" %)
1463 +(% style="color:#4f81bd" %)**AT Command:**
920 920  
921 -[[image:image-20220523151253-8.png]]
1465 +(% _mstvisible="1" %)
1466 +[[image:image-20220523151253-8.png||_mstalt="430677" _mstvisible="3"]]
922 922  
923 -**Downlink Command:**
924 924  
1469 +(% _mstvisible="1" %)
1470 +(% style="color:#4f81bd" %)**Downlink Command:**
1471 +
1472 +(% _msthash="315375" _msttexthash="2898571" _mstvisible="1" %)
925 925  0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352
926 926  
927 -== 4.8 Set Time Sync Mode ==
928 928  
1476 +(% _mstvisible="1" %)
1477 +== (% _msthash="376779" _msttexthash="348712" _mstvisible="3" %)4.8 Set Time Sync Mode(%%) ==
1478 +
1479 +(% _mstvisible="1" %)
929 929  (((
1481 +(% _msthash="506263" _msttexthash="11748321" _mstvisible="2" %)
930 930  Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.
931 931  )))
932 932  
1485 +(% _mstvisible="1" %)
933 933  (((
1487 +(% _msthash="506264" _msttexthash="6530264" _mstvisible="2" %)
934 934  SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.
935 935  )))
936 936  
1491 +(% _mstvisible="1" %)
937 937  (((
938 -**AT Command:**
1493 +(% _mstvisible="2" %)
1494 +(% style="color:#4f81bd" %)**AT Command:**
939 939  )))
940 940  
941 -[[image:image-20220523151336-9.png]]
1497 +(% _mstvisible="1" %)
1498 +[[image:image-20220523151336-9.png||_mstalt="431717" _mstvisible="3"]]
942 942  
943 -**Downlink Command:**
944 944  
1501 +(% _mstvisible="1" %)
1502 +(% style="color:#4f81bd" %)**Downlink Command:**
1503 +
1504 +(% _msthash="315377" _msttexthash="479648" _mstvisible="1" %)
945 945  0x28 01 ~/~/ Same As AT+SYNCMOD=1
946 946  
1507 +(% _msthash="315378" _msttexthash="479076" _mstvisible="1" %)
947 947  0x28 00 ~/~/ Same As AT+SYNCMOD=0
948 948  
949 -== 4.9 Set Time Sync Interval ==
950 950  
1511 +(% _mstvisible="1" %)
1512 +== (% _msthash="536432" _msttexthash="502528" _mstvisible="3" %)4.9 Set Time Sync Interval(%%) ==
1513 +
1514 +(% _msthash="315379" _msttexthash="3065777" _mstvisible="1" %)
951 951  Feature: Define System time sync interval. SYNCTDC default value: 10 days.
952 952  
953 -**AT Command:**
1517 +(% _mstvisible="1" %)
1518 +(% style="color:#4f81bd" %)**AT Command:**
954 954  
955 -[[image:image-20220523151411-10.png]]
1520 +(% _mstvisible="1" %)
1521 +[[image:image-20220523151411-10.png||_mstalt="449696" _mstvisible="3"]]
956 956  
957 -**Downlink Command:**
958 958  
1524 +(% _mstvisible="1" %)
1525 +(% style="color:#4f81bd" %)**Downlink Command:**
1526 +
1527 +(% _msthash="315382" _msttexthash="590044" _mstvisible="1" %)
959 959  0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A
960 960  
961 -== 4.10 Print data entries base on page. ==
962 962  
1531 +(% _mstvisible="1" %)
1532 +== (% _msthash="927901" _msttexthash="882570" _mstvisible="3" %)4.10 Print data entries base on page.(%%) ==
1533 +
1534 +(% _msthash="315383" _msttexthash="3233334" _mstvisible="1" %)
963 963  Feature: Print the sector data from start page to stop page (max is 416 pages).
964 964  
965 -**AT Command: AT+PDTA**
1537 +(% _mstvisible="1" %)
1538 +(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
966 966  
967 -[[image:image-20220523151450-11.png]]
1540 +(% _mstvisible="1" %)
1541 +[[image:image-20220523151450-11.png||_mstalt="451035" _mstvisible="3"]]
968 968  
969 -**Downlink Command:**
970 970  
1544 +(% _mstvisible="1" %)
1545 +(% style="color:#4f81bd" %)**Downlink Command:**
1546 +
1547 +(% _msthash="315386" _msttexthash="799539" _mstvisible="1" %)
971 971  No downlink commands for feature
972 972  
973 -== 4.11 Print last few data entries. ==
974 974  
1551 +(% _mstvisible="1" %)
1552 +== (% _msthash="788762" _msttexthash="747149" _mstvisible="3" %)4.11 Print last few data entries.(%%) ==
1553 +
1554 +(% _msthash="315387" _msttexthash="1101009" _mstvisible="1" %)
975 975  Feature: Print the last few data entries
976 976  
977 -**AT Command: AT+PLDTA**
1557 +(% _mstvisible="1" %)
1558 +(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
978 978  
979 -[[image:image-20220523151524-12.png]]
1560 +(% _mstvisible="1" %)
1561 +[[image:image-20220523151524-12.png||_mstalt="452101" _mstvisible="3"]]
980 980  
981 -**Downlink Command:**
982 982  
1564 +(% _mstvisible="1" %)
1565 +(% style="color:#4f81bd" %)**Downlink Command:**
1566 +
1567 +(% _msthash="315390" _msttexthash="799539" _mstvisible="1" %)
983 983  No downlink commands for feature
984 984  
985 -== 4.12 Clear Flash Record ==
986 986  
1571 +(% _mstvisible="1" %)
1572 +== (% _msthash="437814" _msttexthash="408057" _mstvisible="3" %)4.12 Clear Flash Record(%%) ==
1573 +
1574 +(% _msthash="315391" _msttexthash="1609075" _mstvisible="1" %)
987 987  Feature: Clear flash storage for data log feature.
988 988  
989 -**AT Command: AT+CLRDTA**
1577 +(% _mstvisible="1" %)
1578 +(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
990 990  
991 -[[image:image-20220523151556-13.png]]
1580 +(% _mstvisible="1" %)
1581 +[[image:image-20220523151556-13.png||_mstalt="454129" _mstvisible="3"]]
992 992  
993 -**Downlink Command: 0xA3**
994 994  
1584 +(% _mstvisible="1" %)
1585 +(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
1586 +
1587 +(% _mstvisible="1" %)
995 995  * Example: 0xA301 ~/~/Same as AT+CLRDTA
996 996  
997 -== 4.13 Auto Send None-ACK messages ==
998 998  
1591 +
1592 +(% _mstvisible="1" %)
1593 +== (% _msthash="740532" _msttexthash="701363" _mstvisible="3" %)4.13 Auto Send None-ACK messages(%%) ==
1594 +
1595 +(% _msthash="315394" _msttexthash="51837149" _mstvisible="1" %)
999 999  Feature: LHT65N will wait for ACK for each uplink, If LHT65N doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. LHT65N keeps sending messages in normal periodically. Once LHT65N gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
1000 1000  
1001 1001  
1002 -**AT Command: AT+PNACKMD**
1599 +(% _mstvisible="1" %)
1600 +(% style="color:#4f81bd" %)**AT Command: AT+PNACKMD**
1003 1003  
1602 +(% _msthash="315396" _msttexthash="734682" _mstvisible="1" %)
1004 1004  The default factory setting is 0
1005 1005  
1006 -(% border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1007 -|=(% style="width: 171px;" %)**Command Example**|=(% style="width: 219px;" %)**Function**|=(% style="width: 119px;" %)**Response**
1008 -|(% style="width:171px" %)AT+PNACKMD=1|(% style="width:219px" %)Poll None-ACK message|(% style="width:119px" %)OK
1605 +(% _mstvisible="1" border="1" style="background-color:#ffffcc; color:green; width:450px" %)
1606 +(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 171px;" %)(% _msthash="1231737" _msttexthash="251862" _mstvisible="6" %)**Command Example**|=(% _mstvisible="4" style="width: 219px;" %)(% _msthash="1231738" _msttexthash="116025" _mstvisible="6" %)**Function**|=(% _mstvisible="4" style="width: 119px;" %)(% _msthash="1231739" _msttexthash="116831" _mstvisible="6" %)**Response**
1607 +(% _mstvisible="3" %)|(% _msthash="1231321" _msttexthash="130455" _mstvisible="4" style="width:171px" %)AT+PNACKMD=1|(% _msthash="1231322" _msttexthash="377026" _mstvisible="4" style="width:219px" %)Poll None-ACK message|(% _msthash="1231323" _msttexthash="14989" _mstvisible="4" style="width:119px" %)OK
1009 1009  
1010 -**Downlink Command: 0x34**
1609 +(% _mstvisible="1" %)
1610 +(% style="color:#4f81bd" %)**Downlink Command: 0x34**
1011 1011  
1612 +(% _mstvisible="1" %)
1012 1012  * Example: 0x3401 ~/~/Same as AT+PNACKMD=1
1013 1013  
1014 -= 5. Battery & How to replace =
1015 1015  
1016 -== 5.1 Battery Type ==
1017 1017  
1617 +(% _mstvisible="1" %)
1618 += (% _msthash="568737" _msttexthash="502827" _mstvisible="3" %)5. Battery & How to replace(%%) =
1619 +
1620 +(% _mstvisible="1" %)
1621 +== (% _msthash="265486" _msttexthash="242073" _mstvisible="3" %)5.1 Battery Type(%%) ==
1622 +
1623 +(% _msthash="315398" _msttexthash="33754799" _mstvisible="1" %)
1018 1018  LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.
1019 1019  
1626 +(% _mstvisible="1" %)
1020 1020  (((
1628 +(% _mstvisible="2" %)
1021 1021  The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1022 -[[image:image-20220515075034-1.png||height="208" width="644"]]
1630 +[[image:image-20220515075034-1.png||_mstalt="428961" _mstvisible="4" height="208" width="644"]]
1023 1023  )))
1024 1024  
1633 +(% _mstvisible="1" %)
1025 1025  (((
1635 +(% _mstvisible="2" %)
1026 1026  The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.
1027 1027  
1028 1028  )))
1029 1029  
1030 -== 5.2 Replace Battery ==
1640 +(% _mstvisible="1" %)
1641 +== (% _msthash="353795" _msttexthash="326703" _mstvisible="3" %)5.2 Replace Battery(%%) ==
1031 1031  
1643 +(% _msthash="315399" _msttexthash="11289278" _mstvisible="1" %)
1032 1032  LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.
1033 1033  
1034 -[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]
1646 +(% _mstvisible="1" %)
1647 +[[image:image-20220515075440-2.png||_mstalt="429546" _mstvisible="3" height="338" width="272"]][[image:image-20220515075625-3.png||_mstalt="431574" _mstvisible="3" height="193" width="257"]]
1035 1035  
1036 -== 5.3 Battery Life Analyze ==
1649 +(% _mstvisible="1" %)
1650 +== (% _msthash="494650" _msttexthash="462241" _mstvisible="3" %)5.3 Battery Life Analyze(%%) ==
1037 1037  
1652 +(% _mstvisible="1" %)
1038 1038  (((
1654 +(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1655 +(((
1039 1039  Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:
1040 -https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf
1657 +[[https:~~/~~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf]]
1041 1041  )))
1042 1042  
1043 -= 6. Order Info =
1660 +(((
1661 +
1662 +)))
1044 1044  
1045 1045  (((
1046 -Part Number: (% style="color:#4f81bd" %)** LHT65N-XX-YY**
1665 +A full detail test report for LHT65N on different frequency can be found at : [[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0>>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]
1047 1047  )))
1048 1048  
1668 +
1669 +(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1670 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)6. FAQ(%%) =
1671 +
1672 +(% _msthash="506266" _msttexthash="35479028" _mstvisible="2" %)
1673 +== 6.1 How to use AT Command? ==
1674 +
1049 1049  (((
1050 -(% style="color:#4f81bd" %)**XX **(%%): The default frequency band
1676 +LHT65N supports AT Command set.User can use a USB to TTL adapter plus the Program Cable to connect to LHT65 for using AT command, as below.
1051 1051  )))
1052 1052  
1053 -* (((
1054 -(% style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1679 +[[image:image-20220530085651-1.png]]
1680 +
1681 +
1682 +**Connection:**
1683 +
1684 +✓** USB to TTL GND <~-~->GND**
1685 +
1686 +**✓ USB to TTL RXD <~-~-> D+**
1687 +
1688 +**✓ USB to TTL TXD <~-~-> A11**
1689 +
1690 +**✓ USB to TTL 3.3V <~-~-> D-**
1691 +
1692 +
1693 +(((
1694 +In PC, User needs to set serial tool(such as **putty**, SecureCRT) baud rate to **9600** to access to access serial console for LHT65N. The AT commands are disable by default and need to enter password (default:**123456**) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again. User can use AT+DISAT command to disable AT command before timeout.
1055 1055  )))
1056 -* (((
1057 -(% style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1696 +
1697 +(((
1698 +Input password and ATZ to activate LHT65N,As shown below:
1058 1058  )))
1059 -* (((
1060 -(% style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1700 +
1701 +[[image:image-20220530095701-4.png]]
1702 +
1703 +
1704 +AT Command List is as below:
1705 +
1706 +AT+<CMD>? : Help on <CMD>
1707 +
1708 +AT+<CMD> : Run <CMD>
1709 +
1710 +AT+<CMD>=<value> : Set the value
1711 +
1712 +AT+<CMD>=? : Get the value
1713 +
1714 +AT+DEBUG:Set more info output
1715 +
1716 +ATZ: Trig a reset of the MCU
1717 +
1718 +AT+FDR: Reset Parameters to Factory Default, Keys Reserve
1719 +
1720 +AT+DEUI: Get or Set the Device EUI
1721 +
1722 +AT+DADDR: Get or Set the Device Address
1723 +
1724 +AT+APPKEY: Get or Set the Application Key
1725 +
1726 +AT+NWKSKEY: Get or Set the Network Session Key
1727 +
1728 +AT+APPSKEY: Get or Set the Application Session Key
1729 +
1730 +AT+APPEUI: Get or Set the Application EUI
1731 +
1732 +AT+ADR: Get or Set the Adaptive Data Rate setting. (0: off, 1: on)
1733 +
1734 +AT+TXP: Get or Set the Transmit Power (0-5, MAX:0, MIN:5, according to LoRaWAN Spec)
1735 +
1736 +AT+DR: Get or Set the Data Rate. (0-7 corresponding to DR_X)
1737 +
1738 +AT+DCS: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing
1739 +
1740 +AT+PNM: Get or Set the public network mode. (0: off, 1: on)
1741 +
1742 +AT+RX2FQ: Get or Set the Rx2 window frequency
1743 +
1744 +AT+RX2DR: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
1745 +
1746 +AT+RX1DL: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
1747 +
1748 +AT+RX2DL: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
1749 +
1750 +AT+JN1DL: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms
1751 +
1752 +AT+JN2DL: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms
1753 +
1754 +AT+NJM: Get or Set the Network Join Mode. (0: ABP, 1: OTAA)
1755 +
1756 +AT+NWKID: Get or Set the Network ID
1757 +
1758 +AT+FCU: Get or Set the Frame Counter Uplink
1759 +
1760 +AT+FCD: Get or Set the Frame Counter Downlink
1761 +
1762 +AT+CLASS: Get or Set the Device Class
1763 +
1764 +AT+JOIN: Join network
1765 +
1766 +AT+NJS: Get the join status
1767 +
1768 +AT+SENDB: Send hexadecimal data along with the application port
1769 +
1770 +AT+SEND: Send text data along with the application port
1771 +
1772 +AT+RECVB: Print last received data in binary format (with hexadecimal values)
1773 +
1774 +AT+RECV: Print last received data in raw format
1775 +
1776 +AT+VER: Get current image version and Frequency Band
1777 +
1778 +AT+CFM: Get or Set the confirmation mode (0-1)
1779 +
1780 +AT+CFS: Get confirmation status of the last AT+SEND (0-1)
1781 +
1782 +AT+SNR: Get the SNR of the last received packet
1783 +
1784 +AT+RSSI: Get the RSSI of the last received packet
1785 +
1786 +AT+TDC: Get or set the application data transmission interval in ms
1787 +
1788 +AT+PORT: Get or set the application port
1789 +
1790 +AT+DISAT: Disable AT commands
1791 +
1792 +AT+PWORD: Set password, max 9 digits
1793 +
1794 +AT+CHS: Get or Set Frequency (Unit: Hz) for Single Channel Mode
1795 +
1796 +AT+CHE: Get or Set eight channels mode,Only for US915,AU915,CN470
1797 +
1798 +AT+PDTA: Print the sector data from start page to stop page
1799 +
1800 +AT+PLDTA: Print the last few sets of data
1801 +
1802 +AT+CLRDTA: Clear the storage, record position back to 1st
1803 +
1804 +AT+SLEEP: Set sleep mode
1805 +
1806 +AT+EXT: Get or Set external sensor model
1807 +
1808 +AT+BAT: Get the current battery voltage in mV
1809 +
1810 +AT+CFG: Print all configurations
1811 +
1812 +AT+WMOD: Get or Set Work Mode
1813 +
1814 +AT+ARTEMP: Get or set the internal Temperature sensor alarm range
1815 +
1816 +AT+CITEMP: Get or set the internal Temperature sensor collection interval in min
1817 +
1818 +AT+SETCNT:Set the count at present
1819 +
1820 +AT+RJTDC: Get or set the ReJoin data transmission interval in min
1821 +
1822 +AT+RPL: Get or set response level
1823 +
1824 +AT+TIMESTAMP: Get or Set UNIX timestamp in second
1825 +
1826 +AT+LEAPSEC: Get or Set Leap Second
1827 +
1828 +AT+SYNCMOD: Get or Set time synchronization method
1829 +
1830 +AT+SYNCTDC: Get or set time synchronization interval in day
1831 +
1832 +AT+PID: Get or set the PID
1833 +
1834 +
1061 1061  )))
1062 -* (((
1063 -(% style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1836 +
1837 +(% _mstvisible="1" %)
1838 += (% _msthash="183170" _msttexthash="163566" _mstvisible="3" %)7. Order Info(%%) =
1839 +
1840 +(% _mstvisible="1" %)
1841 +(((
1842 +(% _msthash="506267" _msttexthash="432432" _mstvisible="2" %)
1843 +Part Number: (% _mstvisible="4" style="color:#4f81bd" %)** LHT65N-XX-YY**
1064 1064  )))
1065 -* (((
1066 -(% style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1845 +
1846 +(% _mstvisible="1" %)
1847 +(((
1848 +(% _msthash="506268" _msttexthash="686946" _mstvisible="2" %)
1849 +(% _mstvisible="4" style="color:#4f81bd" %)**XX **(%%): The default frequency band
1067 1067  )))
1068 -* (((
1069 -(% style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1851 +
1852 +(% _mstvisible="1" %)
1853 +* (% _mstvisible="3" %)
1854 +(((
1855 +(% _msthash="903327" _msttexthash="393341" _mstvisible="4" %)
1856 +(% _mstvisible="6" style="color:#4f81bd" %)** AS923**(%%): LoRaWAN AS923 band
1070 1070  )))
1071 -* (((
1072 -(% style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1858 +* (% _mstvisible="3" %)
1859 +(((
1860 +(% _msthash="903328" _msttexthash="394576" _mstvisible="4" %)
1861 +(% _mstvisible="6" style="color:#4f81bd" %)** AU915**(%%): LoRaWAN AU915 band
1073 1073  )))
1074 -* (((
1075 -(% style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1863 +* (% _mstvisible="3" %)
1864 +(((
1865 +(% _msthash="903329" _msttexthash="393913" _mstvisible="4" %)
1866 +(% _mstvisible="6" style="color:#4f81bd" %)** EU433**(%%): LoRaWAN EU433 band
1076 1076  )))
1868 +* (% _mstvisible="3" %)
1869 +(((
1870 +(% _msthash="903330" _msttexthash="399087" _mstvisible="4" %)
1871 +(% _mstvisible="6" style="color:#4f81bd" %)** EU868**(%%): LoRaWAN EU868 band
1872 +)))
1873 +* (% _mstvisible="3" %)
1874 +(((
1875 +(% _msthash="903331" _msttexthash="395109" _mstvisible="4" %)
1876 +(% _mstvisible="6" style="color:#4f81bd" %)** KR920**(%%): LoRaWAN KR920 band
1877 +)))
1878 +* (% _mstvisible="3" %)
1879 +(((
1880 +(% _msthash="903332" _msttexthash="400842" _mstvisible="4" %)
1881 +(% _mstvisible="6" style="color:#4f81bd" %)** US915**(%%): LoRaWAN US915 band
1882 +)))
1883 +* (% _mstvisible="3" %)
1884 +(((
1885 +(% _msthash="903333" _msttexthash="396487" _mstvisible="4" %)
1886 +(% _mstvisible="6" style="color:#4f81bd" %)** IN865**(%%): LoRaWAN IN865 band
1887 +)))
1888 +* (% _mstvisible="3" %)
1889 +(((
1890 +(% _msthash="903334" _msttexthash="390923" _mstvisible="4" %)
1891 +(% _mstvisible="6" style="color:#4f81bd" %)** CN470**(%%): LoRaWAN CN470 band
1892 +)))
1077 1077  
1894 +(% _mstvisible="1" %)
1078 1078  (((
1079 -(% style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1896 +(% _msthash="506269" _msttexthash="443495" _mstvisible="2" %)
1897 +(% _mstvisible="4" style="color:#4f81bd" %)**YY**(%%): Sensor Accessories
1080 1080  )))
1081 1081  
1082 -* (((
1083 -(% style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1900 +(% _mstvisible="1" %)
1901 +* (% _mstvisible="3" %)
1902 +(((
1903 +(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
1904 +(% _mstvisible="6" style="color:#4f81bd" %)**E3**(%%): External Temperature Probe
1905 +
1906 +
1907 +(% _msthash="903335" _msttexthash="720135" _mstvisible="4" %)
1908 +
1084 1084  )))
1085 1085  
1086 -= 7. Packing Info =
1911 +(% _mstvisible="1" %)
1912 += (% _msthash="233363" _msttexthash="211237" _mstvisible="3" %)8. Packing Info(%%) =
1087 1087  
1914 +(% _mstvisible="1" %)
1088 1088  (((
1089 -**Package Includes**:
1916 +(% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
1917 +
1918 +
1919 +(% _msthash="506270" _msttexthash="295386" _mstvisible="2" %)
1920 +(% _mstvisible="3" %)**Package Includes**(%%):
1090 1090  )))
1091 1091  
1092 -* (((
1923 +(% _mstvisible="1" %)
1924 +* (% _mstvisible="3" %)
1925 +(((
1926 +(% _msthash="903336" _msttexthash="1033149" _mstvisible="4" %)
1093 1093  LHT65N Temperature & Humidity Sensor x 1
1094 1094  )))
1095 -* (((
1929 +* (% _mstvisible="3" %)
1930 +(((
1931 +(% _msthash="903337" _msttexthash="242567" _mstvisible="4" %)
1096 1096  Program cable x 1
1097 1097  )))
1098 -* (((
1934 +* (% _mstvisible="3" %)
1935 +(((
1936 +(% _msthash="903338" _msttexthash="544167" _mstvisible="4" %)
1099 1099  Optional external sensor
1100 1100  )))
1101 1101  
1940 +(% _mstvisible="1" %)
1102 1102  (((
1103 -**Dimension and weight**:
1942 +(% _msthash="506271" _msttexthash="403858" _mstvisible="2" %)
1943 +(% _mstvisible="3" %)**Dimension and weight**(%%):
1104 1104  )))
1105 1105  
1106 -* (((
1946 +(% _mstvisible="1" %)
1947 +* (% _mstvisible="3" %)
1948 +(((
1949 +(% _msthash="903339" _msttexthash="391807" _mstvisible="4" %)
1107 1107  Device Size:  13.5 x 7 x 3 cm
1108 1108  )))
1109 -* (((
1952 +* (% _mstvisible="3" %)
1953 +(((
1954 +(% _msthash="903340" _msttexthash="285298" _mstvisible="4" %)
1110 1110  Device Weight: 105g
1111 1111  )))
1112 -* (((
1957 +* (% _mstvisible="3" %)
1958 +(((
1959 +(% _msthash="903341" _msttexthash="562926" _mstvisible="4" %)
1113 1113  Package Size / pcs : 14.5 x 8 x 5 cm
1114 1114  )))
1115 -* (((
1962 +* (% _mstvisible="3" %)
1963 +(((
1964 +(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1116 1116  Weight / pcs : 170g
1966 +
1967 +
1968 +(% _msthash="903342" _msttexthash="227084" _mstvisible="4" %)
1969 +
1117 1117  )))
1118 1118  
1119 -= 8. FCC Warning =
1972 += 9. Reference =
1120 1120  
1974 +* [[Datasheet, Photos, Decoder, Firmware>>https://www.dropbox.com/home/Products_Public_Document/LoRaWAN%20End%20Node/LHT65N%20Temperature%20%26%20Humidity%20Sensor]]
1975 +
1976 +
1977 += 10. FCC Warning =
1978 +
1979 +(% _mstvisible="1" %)
1121 1121  (((
1981 +(% _msthash="506272" _msttexthash="6034353" _mstvisible="2" %)
1122 1122  This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:
1123 1123  )))
1124 1124  
1985 +(% _mstvisible="1" %)
1125 1125  (((
1987 +(% _msthash="506273" _msttexthash="44097638" _mstvisible="2" %)
1126 1126  (1) This device may not cause harmful interference；
1127 1127  )))
1128 1128  
1991 +(% _mstvisible="1" %)
1129 1129  (((
1993 +(% _msthash="506274" _msttexthash="7559773" _mstvisible="2" %)
1130 1130  (2) this device must accept any interference received, including interference that may cause undesired operation.
1131 1131  )))
image-20220530085651-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +93.8 KB
Content
image-20220530095701-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +39.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0