LHT65N LoRaWAN Temperature & Humidity Sensor Manual

= Overview =

[[image:LHT65N_10.png||alt="LHT65_Image" height="265" width="265"]]

The Dragino LHT65N Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a(% class="mark" %) **built-in Temperature & Humidity sensor**(%%) and has an external sensor connector to connect to an external (% class="mark" %)**Temperature Sensor**(%%)**.**

11

12

The LHT65N allows users to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, building automation, and so on.

13

14

LHT65N has a built-in 2400mAh non-chargeable battery which can be used for up to 10 years*.

15

16

LHT65N is full compatible with LoRaWAN v1.0.3 Class A protocol, it can work with a standard LoRaWAN gateway.

17

18

LHT65N supports (% class="mark" %)Datalog Feature(%%). It will record the data when there is no network coverage and users can retrieve the sensor value later to ensure no miss for every sensor reading.

19

20

*The actual battery life depends on how often to send data, please see the battery analyzer chapter.

== Features: ==

* Wall mountable

* LoRaWAN v1.0.3 Class A protocol

27

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

28

* AT Commands to change parameters

29

* Remote configure parameters via LoRaWAN Downlink

30

* Firmware upgradeable via program port

31

* Built-in 2400mAh battery for up to 10 years of use.

32

* Built-in Temperature & Humidity sensor

33

* Optional External Sensors

34

* Tri-color LED to indicate working status

* Datalog feature

== Specification: ==

**Built-in Temperature Sensor:**

40

41

* Resolution: 0.01 °C

42

* Accuracy Tolerance : Typ ±0.3 °C

43

* Long Term Drift: < 0.02 °C/yr

44

* Operating Range: -40 ~~ 85 °C

45

46

**Built-in Humidity Sensor:**

47

48

* Resolution: 0.04 %RH

49

* Accuracy Tolerance : Typ ±3 %RH

50

* Long Term Drift: < 0.02 °C/yr

51

* Operating Range: 0 ~~ 96 %RH

52

53

**External Temperature Sensor:**

54

55

* Resolution: 0.0625 °C

56

* ±0.5°C accuracy from -10°C to +85°C

57

* ±2°C accuracy from -55°C to +125°C

58

* Operating Range: -55 °C ~~ 125 °C

59

60

= Connect LHT65N to IoT Server =

61

62

== How does LHT65N work? ==

63

64

LHT65N is configured as LoRaWAN OTAA Class A mode by default. Each LHT65N is shipped with a worldwide unique set of OTAA keys. To use LHT65N in a LoRaWAN network, first, we need to put the OTAA keys in LoRaWAN Network Server and then activate LHT65N.

65

66

If LHT65N is under the coverage of this LoRaWAN network. LHT65N can join the LoRaWAN network automatically. After successfully joining, LHT65N will start to measure environment temperature and humidity, and start to transmit sensor data to the LoRaWAN server. The default period for each uplink is 20 minutes.

67

68

69

== How to Activate LHT65N? ==

70

71

The LHT65N has two working modes:

72

73

* **Deep Sleep Mode**: LHT65N doesn’t have any LoRaWAN activation. This mode is used for storage and shipping to save battery life.

74

* **Working Mode**: In this mode, LHT65N works as LoRaWAN Sensor mode to Join LoRaWAN network and send out the sensor data to the server. Between each sampling/tx/rx periodically, LHT65 will be in STOP mode (IDLE mode), in STOP mode, LHT65N has the same power consumption as Deep Sleep mode.

75

76

The LHT65N is set in deep sleep mode by default; The ACT button on the front is to switch to different modes:

77

78

[[image:image-20220515123819-1.png||height="379" width="317"]]

79

80

|**Behavior on ACT**|**Function**|**Action**

81

|**Pressing ACT between 1s < time < 3s**|Test uplink status|If LHT65N is already Joined to the LoRaWAN network, LHT65N will send an uplink packet, if LHT65N has an external sensor connected, blue led will blink once. If LHT65N has no external sensor, red led will blink once.

82

|**Pressing ACT for more than 3s**|Active Device|green led will fast blink 5 times, LHT65N will enter working mode and start to JOIN LoRaWAN network. green led will solid turn on for 5 seconds after join in network.

83

|**Fast press ACT 5 times**|Deactivate Device|red led will solid on for 5 seconds. This means LHT65N is in Deep Sleep Mode.

84

85

== Example to join LoRaWAN network ==

86

87

(% class="wikigeneratedid" %)

88

This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Use with other LoRaWAN IoT servers is of a similar procedure.

89

90

(% class="wikigeneratedid" %)

91

[[image:image-20220522232442-1.png||height="387" width="648"]]

92

93

Assume the LPS8N is already set to connect to [[TTN V3 network>>url:https://eu1.cloud.thethings.network]], So it provides network coverage for LHT65N. Next we need to add the LHT65N device in TTN V3:

94

95

96

=== **Step 1**: Create Device n TTN ===

97

98

Create a device in TTN V3 with the OTAA keys from LHT65N.

99

100

Each LHT65N is shipped with a sticker with its device EUI, APP Key and APP EUI as below:

101

102

[[image:image-20220522232812-2.png||height="219" width="279"]]

103

104

User can enter these keys in the LoRaWAN Server portal. Below is TTN V3 screenshot:

105

106

Add APP EUI in the application.

107

108

[[image:image-20220522232916-3.png]]

109

110

111

[[image:image-20220522232932-4.png]]

112

113

114

[[image:image-20220522232954-5.png]]

115

116

Note: LHT65N use same payload as LHT65.

117

118

[[image:image-20220522233026-6.png]]

119

120

121

Input APP EUI, APP KEY and DEV EUI:

122

123

[[image:image-20220522233118-7.png]]

124

125

126

=== Step 2: Activate LHT65N by pressing the ACT button for more than 5 seconds. ===

127

128

Use ACT button to activate LHT65N and it will auto-join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

129

130

[[image:image-20220522233300-8.png]]

131

132

133

== Uplink Payload: ==

134

135

The uplink payload includes totally 11 bytes. Uplink packets use FPORT=2 and(% class="mark" %) every 20 minutes(%%) send one uplink by default.

136

137

After each uplink, the (% class="mark" %)BLUE LED(%%) will blink once.

138

139

140

(% style="width:572px" %)

141

142

|(% style="width:106px" %)**Value**|(% style="width:71px" %)[[BAT>>path:#Battery]]|(% style="width:128px" %)(((

143

[[Built-In>>path:#SHT20_Temperature]]

144

145

[[Temperature>>path:#SHT20_Temperature]]

146

)))|(% style="width:103px" %)(((

147

[[Built-in>>path:#SHT20_Humidity]]

148

149

[[Humidity>>path:#SHT20_Humidity]]

150

)))|(% style="width:72px" %)[[Ext>>path:#Extension_Sensor]] #|(% style="width:89px" %)[[Ext value>>path:#Extension_sensor_value]]

151

152

* The First 6 bytes: has fix meanings for every LHT65N.

153

* The 7th byte (EXT #): defines the external sensor model.

154

* The 8^^th^^ ~~ 11^^th^^ byte: the value for external sensor value. The definition is based on external sensor type. (If EXT=0, there won’t be these four bytes.)

155

156

=== Decoder in TTN V3 ===

157

158

When the uplink payload arrives TTNv3, it shows HEX format and not friendly to read. We can add LHT65N decoder in TTNv3 for friendly reading.

159

160

Below is the position to put the decoder and LHT65N decoder can be download from here:

161

162

[[https:~~/~~/www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0 >>https://www.dropbox.com/sh/r2i3zlhsyrpavla/AAB1sZw3mdT0K7XjpHCITt13a?dl=0]]

163

164

[[image:image-20220522234118-10.png]]

165

166

167

=== BAT-Battery Info ===

168

169

These two bytes of BAT include the battery state and the actually voltage

170

171

(% style="width:646px" %)

172

|Bit(bit)|(% style="width:272px" %)[15:14]|(% style="width:214px" %)[13:0]

173

|Value|(% style="width:272px" %)(((

174

BAT Status

175

176

00(b): Ultra Low ( BAT <= 2.50v)

177

178

01(b): Low (2.50v <=BAT <= 2.55v)

179

180

10(b): OK (2.55v <= BAT <=2.65v)

181

182

11(b): Good (BAT >= 2.65v)

183

)))|(% style="width:214px" %)Actually BAT voltage

184

185

[[image:image-20220522235639-1.png]]

186

187

Check the battery voltage for LHT65N.

188

189

* BAT status=(0Xcba4>>14)&0xFF=11(B)，very good

190

* Battery Voltage =0xCBF6&0x3FFF=0x0BA4=2980mV

191

192

=== Built-in Temperature ===

193

194

[[image:image-20220522235639-2.png]]

195

196

* Temperature: 0x0ABB/100=27.47℃

197

198

[[image:image-20220522235639-3.png]]

199

200

* Temperature: (0xF5C6-65536)/100=-26.18℃

201

202

=== Built-in Humidity ===

203

204

[[image:image-20220522235639-4.png]]

205

206

* Humidity: 0x025C/10=60.4%

=== Ext # ===

Bytes for External Sensor:

211

212

(% style="width:624px" %)

213

|(% style="width:139px" %)**EXT # Value**|(% style="width:484px" %)**External Sensor Type**

214

|(% style="width:139px" %)0x01|(% style="width:484px" %)Sensor E3, Temperature Sensor

215

|(% style="width:139px" %)0x09|(% style="width:484px" %)Sensor E3, Temperature Sensor, Datalog Mod

=== Ext value ===

==== Ext~=1, E3 Temperature Sensor ====

220

221

[[image:image-20220522235639-5.png]]

222

223

224

* DS18B20 temp=0x0ADD/100=27.81℃

225

226

The last 2 bytes of data are meaningless

[[image:image-20220522235639-6.png]]

231

232

* External temperature= (0xF54F-65536)/100=-27.37℃

233

234

The last 2 bytes of data are meaningless

235

236

237

If the external sensor is 0x01, and there is no external temperature connected. The temperature will be set to 7FFF which is 327.67℃

238

239

240

==== Ext~=9, E3 sensor with Unix Timestamp ====

241

242

Timestamp mode is designed for LHT65N with E3 probe, it will send the uplink payload with Unix timestamp. With the limitation of 11 bytes (max distance of AU915/US915/AS923 band), the time stamp mode will be lack of BAT voltage field, instead, it shows the battery status. The payload is as below:

243

244

245

(% style="width:697px" %)

246

247

|(% style="width:96px" %)**Value**|(% style="width:164px" %)[[External temperature>>path:#DS18b20_value]]|(% style="width:104px" %)(((

248

[[Built-In>>path:#SHT20_Temperature]]

249

250

[[Temperature>>path:#SHT20_Temperature]]

251

)))|(% style="width:106px" %)(((

252

[[BAT Status &>>path:#BAT_Humidity]]

253

254

[[Built-in>>path:#BAT_Humidity]]

255

256

[[Humidity>>path:#BAT_Humidity]]

257

)))|(% style="width:108px" %)[[Status & Ext>>path:#Status_EXT]]|(% style="width:116px" %)(((

258

[[Unix>>path:#Unix_Time_Stamp]]

259

260

[[Time Stamp>>path:#Unix_Time_Stamp]]

261

)))

262

263

* **Battery status & **[[(% class="wikiinternallink wikiinternallink wikiinternallink" %)**Built-in Humidity**>>path:#SHT20_Humidity]]

264

265

(% style="width:587px" %)

266

|Bit(bit)|(% style="width:280px" %)[15:14]|(% style="width:136px" %)[11:0]

267

|Value|(% style="width:280px" %)(((

268

BAT Status

269

270

00(b): Ultra Low ( BAT <= 2.50v)

271

272

01(b): Low (2.50v <=BAT <= 2.55v)

273

274

10(b): OK (2.55v <= BAT <=2.65v)

275

276

11(b): Good (BAT >= 2.65v)

277

)))|(% style="width:136px" %)(((

278

[[Built-in Humidity>>path:#SHT20_Humidity]]

)))

* **Status & Ext Byte**

284

285

(% style="width:732px" %)

Ext:

0b(1001)

)))

* Poll Message Flag: 1: This message is a poll message reply, 0: means this is a normal uplink.

294

* Sync time OK: 1: Set time ok，0: N/A. After time SYNC request is sent, LHT65N will set this bit to 0 until got the time stamp from the application server.

295

* Unix Time Request:1: Request server downlink Unix time, 0 : N/A. In this mode, LHT65N will set this bit to 1 every 10 days to request a time SYNC. (AT+SYNCMOD to set this)

296

297

== Show data on Datacake ==

298

299

Datacake IoT platform provides a human-friendly interface to show the sensor data, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

300

301

302

**Step 1**: Be sure that your device is programmed and properly connected to the LoRaWAN network.

303

304

**Step 2**: Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

Add Datacake:

[[image:image-20220523000825-7.png||height="262" width="583"]]

310

311

312

Select default key as Access Key:

313

314

[[image:image-20220523000825-8.png||height="453" width="406"]]

315

316

317

In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT65 device.

318

319

[[image:image-20220523000825-9.png||height="366" width="392"]]

[[image:image-20220523000825-10.png||height="432" width="762"]]

324

325

326

== Datalog Feature ==

327

328

This feature is always enabled. When user wants to retrieve the sensor value, he can send a poll command from the IoT platform to ask LHT65N to send the value in the required time slot.

329

330

=== Unix TimeStamp ===

331

332

LHT65N uses Unix TimeStamp format based on

333

334

[[image:image-20220523001219-11.png||height="97" width="627"]]

335

336

337

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :

338

339

Below is the converter example

340

341

[[image:image-20220523001219-12.png||height="353" width="853"]]

342

343

So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25

344

345

346

=== Set Device Time ===

347

348

There are two ways to set device’s time:

349

350

**~1. Through LoRaWAN MAC Command (Default settings)**

351

352

User need to set SYNCMOD=1 to enable sync time via MAC command.

353

354

Once LHT65N Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to LHT65N. If LHT65N fails to get the time from the server, LHT65N will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).

355

356

Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn’t support. If server doesn’t support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.

357

358

359

**2. Manually Set Time**

360

361

User needs to set SYNCMOD=0 to manual time, otherwise, the user set time will be overwritten by the time set by the server.

362

363

364

=== Poll sensor value ===

365

366

User can poll sensor value based on timestamps from the server. Below is the downlink command.

367

368

369

(% style="width:454px" %)

370

|(% style="width:69px" %)1byte|(% style="width:129px" %)4bytes|(% style="width:134px" %)4bytes|(% style="width:119px" %)1byte

371

|(% style="width:69px" %)31|(% style="width:129px" %)Timestamp start|(% style="width:134px" %)Timestamp end|(% style="width:119px" %)Uplink Interval

372

373

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

374

375

376

For example, downlink command 31 5FC5F350 5FC6 0160 05

377

378

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00’s data

379

380

Uplink Internal =5s，means LHT65N will send one packet every 5s. range 5~~255s.

381

382

383

=== Datalog Uplink payload ===

384

385

The Datalog poll reply uplink will use below payload format.

386

387

388

Retrieval data payload

389

390

|**Size(bytes)**|**2**|**2**|**2**|**1**|**4**

391

|**Value**|[[External sensor data>>path:#Extension_sensor_value]]|(((

392

[[Built-In>>path:#SHT20_Temperature]]

393

394

[[Temperature>>path:#SHT20_Temperature]]

395

)))|(((

396

[[Built-in>>path:#SHT20_Humidity]]

397

398

[[Humidity>>path:#SHT20_Humidity]]

399

)))|[[Poll message flag & Ext>>path:#Poll_EXT]]|(((

400

[[Unix Time Stamp>>path:#Unix_Time_Stamp]]

)))

Poll message flag & Ext

406

407

408

|**Bits**|**7**|**6**|**5**|**4**|**[3:0]**

Ext:

0b(1001)

)))

Poll Message Flag: 1: This message is a poll message reply.

416

417

* Poll Message Flag is set to 1.

418

* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.

419

420

For example, in US915 band, the max payload for different DR is:

421

422

a) DR0: max is 11 bytes so one entry of data

423

424

b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

425

426

c) DR2: total payload includes 11 entries of data

427

428

d) DR3: total payload includes 22 entries of data.

429

430

If devise doesn’t have any data in the polling time. Device will uplink 11 bytes of 0

**Example:**

If LHT65N has below data inside Flash:

436

437

Flash Addr |Unix Time | Ext | BAT voltage| Value

438

439

80196E0 21/1/19 04:27:03 1 3145 sht_temp=22.00 sht_hum=32.6 ds_temp=327.67

440

441

80196F0 21/1/19 04:28:57 1 3145 sht_temp=21.90 sht_hum=33.1 ds_temp=327.67

442

443

8019700 21/1/19 04:30:30 1 3145 sht_temp=21.81 sht_hum=33.4 ds_temp=327.67

444

445

8019710 21/1/19 04:40:30 1 3145 sht_temp=21.65 sht_hum=33.7 ds_temp=327.67

446

447

8019720 21/1/19 04:50:30 1 3147 sht_temp=21.55 sht_hum=34.1 ds_temp=327.67

448

449

8019730 21/1/19 05:00:30 1 3149 sht_temp=21.50 sht_hum=34.1 ds_temp=327.67

450

451

8019740 21/1/19 05:10:30 1 3149 sht_temp=21.43 sht_hum=34.6 ds_temp=327.67

452

453

8019750 21/1/19 05:20:30 1 3151 sht_temp=21.35 sht_hum=34.9 ds_temp=327.67

454

455

456

If user sends below downlink command:

3160065F9760066DA705

Where : Start time: 60065F97 = time 21/1/19 04:27:03

461

462

Stop time 60066DA7= time 21/1/19 05:27:03

463

464

465

LHT65N will uplink this payload.

466

467

[[image:image-20220523001219-13.png]]

468

469

7FFF089801464160065F977FFF088E014B41600660097FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E

470

471

Where the first 11 bytes is for the first entry:

472

473

7FFF089801464160065F97

474

475

Ext sensor data=0x7FFF/100=327.67

476

477

Temp=0x0898/100=22.00

Hum=0x0146/10=32.6

poll message flag & Ext=0x41,means reply data,Ext=1

482

483

Unix time is 0x60065F97=1611030423s=21/1/19 04:27:03

== Alarm Mode ==

Alarm mode feature is added since firmware v1.5. When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

489

490

491

Note: Alarm mode will increase a little big the power consumption, we recommend extending the normal reading time when enabling this feature.

492

493

494

AT Commands for Alarm mode:

495

496

**AT+WMOD=1**: Enable/Disable Alarm Mode. (0:Disable, 1: Enable)

497

498

**AT+CITEMP=1**: The interval to check the temperature for Alarm. (Unit: minute)

== LED Indicator ==

The LHT65N has a triple color LED which for easy shows different stage.

505

506

While pressing ACT button, the LED will work as per LED status with ACT button.

507

508

In a normal working state:

509

510

* For each uplink, the BLUE LED or RED LED will blink once.

511

* BLUE LED when an external sensor is connected

512

* RED LED when an external sensor is not connected

513

* For each success downlink, the PURPLE LED will blink once

----

== Installation ==

[[image:image-20220516231650-1.png||height="436" width="428"]]

= Sensors & Accessories =

525

526

== E3 Temperature Probe ==

527

528

[[image:image-20220515080154-4.png||height="182" width="161"]] [[image:image-20220515080330-5.png||height="201" width="195"]]

529

530

531

With Temperature sensor with 2 meters cable long

532

533

* Resolution: 0.0625 °C

534

* ±0.5°C accuracy from -10°C to +85°C

535

* ±2°C accuracy from -55°C to +125°C

536

* Operating Range: -40 ~~ 125 °C

537

* -55°C to 125°C

538

* Working voltage 2.35v ~~ 5v

539

540

= Configure LHT65N via AT Command or LoRaWAN Downlink =

541

542

Use can configure LHT65N via AT Command or LoRaWAN Downlink.

543

544

* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

545

* LoRaWAN Downlink instruction for different platforms:

546

547

[[http:~~/~~/wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server>>url:http://wiki.dragino.com/index.php?title=Main_Page#Use_Note_for_Server]]

548

549

550

There are two kinds of commands to configure LHT65N, they are:

551

552

* **General Commands**.

553

554

These commands are to configure:

555

556

* General system settings like: uplink interval.

557

* LoRaWAN protocol & radio-related commands.

558

559

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki:

560

561

[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

* **Commands special design for LHT65N**

566

567

These commands are only valid for LHT65N, as below:

568

569

570

== Set Transmit Interval Time ==

571

572

Feature: Change LoRaWAN End Node Transmit Interval.

573

574

**AT Command: AT+TDC**

575

576

|**Command Example**|**Function**|**Response**

577

|AT+TDC?|Show current transmit Interval|(((

30000

OK

the interval is 30000ms = 30s

583

)))

584

|AT+TDC=60000|Set Transmit Interval|(((

585

OK

586

587

Set transmit interval to 60000ms = 60 seconds

)))

**Downlink Command: 0x01**

592

593

Format: Command Code (0x01) followed by 3 bytes time value.

594

595

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

596

597

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

598

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

599

600

601

== Set External Sensor Mode ==

602

603

Feature: Change External Sensor Mode.

604

605

**AT Command: AT+EXT**

606

607

|**Command Example**|**Function**|**Response**

608

|AT+EXT?|Get current external sensor mode|(((

1

OK

External Sensor mode =1

614

)))

615

|AT+EXT=1|(% colspan="2" %)Set external sensor mode to 1

616

|AT+EXT=9|(% colspan="2" %)Set to external DS18B20 with timestamp

617

618

619

**Downlink Command: 0xA2**

620

621

Total bytes: 2 ~~ 5 bytes

Example:

* 0xA201: Set external sensor type to E1

626

* 0xA209: Same as AT+EXT=9

627

* 0xA20702003c,Same as AT+SETCNT=60

628

629

630

== Enable/Disable uplink Temperature probe ID ==

631

632

Feature: If PID is enabled, device will send the temperature probe ID on:

633

634

* First Packet after OTAA Join

635

* Every 24 hours since the first packet.

636

637

PID is default set to disable (0)

**AT Command:**

|**Command Example**|**Function**|**Response**

643

|AT+PID=1|Enable PID uplink|OK

644

645

646

**Downlink Command:**

* 0xA800 à AT+PID=0

* 0xA801 à AT+PID=1

== Set Password ==

Feature: Set device password, max 9 digits

656

657

**AT Command: AT+PWORD**

658

659

|**Command Example**|**Function**|**Response**

660

|AT+PWORD=?|Show password|(((

123456

OK

)))

|AT+PWORD=999999|Set password|OK

667

668

669

**Downlink Command:**

670

671

No downlink command for this feature.

672

673

674

== Quit AT Command ==

675

676

Feature: Quit AT Command mode, so user needs to input password again before use AT Commands.

677

678

**AT Command: AT+DISAT**

679

680

|**Command Example**|**Function**|**Response**

681

|AT+DISAT|Quit AT Commands mode|OK

682

683

684

**Downlink Command:**

685

686

No downlink command for this feature.

687

688

689

== Set to sleep mode ==

690

691

Feature: Set device to sleep mode

692

693

**AT Command: AT+SLEEP**

694

695

| | |

696

|**Command Example**|**Function**|**Response**

697

|AT+SLEEP|Set to sleep mode|(((

698

Clear all stored sensor data…

OK

)))

**Downlink Command:**

705

706

* There is no downlink command to set to Sleep mode.

== Set system time ==

711

712

Feature: Set system time, unix format. [[See here for format detail.>>path:#TimeStamp]]

**AT Command:**

|**Command Example**|**Function**

717

|AT+TIMESTAMP=1611104352|(((

718

OK

719

720

Set System time to 2021-01-20 00:59:12

)))

**Downlink Command:**

725

726

0x306007806000 ~/~/ Set timestamp to 0x(6007806000),Same as AT+TIMESTAMP=1611104352

727

728

729

== Set Time Sync Mode ==

730

731

Feature: Enable/Disable Sync system time via LoRaWAN MAC Command (DeviceTimeReq), LoRaWAN server must support v1.0.3 protocol to reply this command.

732

733

734

SYNCMOD is set to 1 by default. If user want to set a different time from LoRaWAN server, user need to set this to 0.

**AT Command:**

|**Command Example**|**Function**

740

|AT+SYNCMOD=1|Enable Sync system time via LoRaWAN MAC Command (DeviceTimeReq)

741

742

743

**Downlink Command:**

744

745

0x28 01 ~/~/ Same As AT+SYNCMOD=1

746

747

0x28 00 ~/~/ Same As AT+SYNCMOD=0

748

749

750

== Set Time Sync Interval ==

751

752

Feature: Define System time sync interval. SYNCTDC default value: 10 days.

**AT Command:**

|**Command Example**|**Function**

757

|AT+SYNCTDC=0x0A|Set SYNCTDC to 10 (0x0A), so the sync time is 10 days.

758

759

760

**Downlink Command:**

761

762

0x29 0A ~/~/ Same as AT+SYNCTDC=0x0A

763

764

765

== Print data entries base on page. ==

766

767

Feature: Print the sector data from start page to stop page (max is 416 pages).

768

769

**AT Command: AT+PDTA**

770

771

|**Command Example**|**Response**

|(((

AT+PDTA=1,3

Print page 1 to 3

)))|(((

8019500 19/6/26 16:48 1 2992 sht_temp=28.21 sht_hum=71.5 ds_temp=27.31

780

781

8019510 19/6/26 16:53 1 2994 sht_temp=27.64 sht_hum=69.3 ds_temp=26.93

782

783

8019520 19/6/26 16:58 1 2996 sht_temp=28.39 sht_hum=72.0 ds_temp=27.06

784

785

8019530 19/6/26 17:03 1 2996 sht_temp=27.97 sht_hum=70.4 ds_temp=27.12

786

787

8019540 19/6/26 17:08 1 2996 sht_temp=27.80 sht_hum=72.9 ds_temp=27.06

788

789

8019550 19/6/26 17:13 1 2998 sht_temp=27.30 sht_hum=72.4 ds_temp=26.68

790

791

8019560 19/6/26 17:22 1 2992 sht_temp=26.27 sht_hum=62.3 ds_temp=26.56

8019570

8019580

8019590

80195A0

80195B0

80195C0

80195D0

80195E0

80195F0

OK

)))

**Downlink Command:**

817

818

No downlink commands for feature

== Print last few data entries. ==

823

824

Feature: Print the last few data entries

825

826

**AT Command: AT+PLDTA**

827

828

|**Command Example**|**Response**

|(((

AT+PLDTA=5

Print last 5 entries

)))|(((

Stop Tx and RTP events when read sensor data

837

838

1 19/6/26 13:59 1 3005 sht_temp=27.09 sht_hum=79.5 ds_temp=26.75

839

840

2 19/6/26 14:04 1 3007 sht_temp=26.65 sht_hum=74.8 ds_temp=26.43

841

842

3 19/6/26 14:09 1 3007 sht_temp=26.91 sht_hum=77.9 ds_temp=26.56

843

844

4 19/6/26 14:15 1 3007 sht_temp=26.93 sht_hum=76.7 ds_temp=26.75

845

846

5 19/6/26 14:20 1 3007 sht_temp=26.78 sht_hum=76.6 ds_temp=26.43

847

848

Start Tx and RTP events

OK

)))

**Downlink Command:**

855

856

No downlink commands for feature

== Clear Flash Record ==

861

862

Feature: Clear flash storage for data log feature.

863

864

**AT Command: AT+CLRDTA**

865

866

|**Command Example**|**Function**|**Response**

867

|AT+CLRDTA|Clear date record|(((

868

Clear all stored sensor data…

OK

)))

**Downlink Command: 0xA3**

875

876

* Example: 0xA301 ~/~/Same as AT+CLRDTA

= Battery & How to replace =

== Battery Type ==

LHT65N is equipped with a 2400mAH Li-MnO2 (CR17505) battery . The battery is an un-rechargeable battery with low discharge rate targeting for up to 8~~10 years use. This type of battery is commonly used in IoT devices for long-term running, such as water meters.

886

887

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

888

[[image:image-20220515075034-1.png||height="208" width="644"]]

889

890

891

The minimum Working Voltage for the LHT65N is ~~ 2.5v. When battery is lower than 2.6v, it is time to change the battery.

892

893

894

== Replace Battery ==

895

896

LHT65N has two screws on the back, Unscrew them, and changing the battery inside is ok. The battery is a general CR17450 battery. Any brand should be ok.

897

898

[[image:image-20220515075440-2.png||height="338" width="272"]][[image:image-20220515075625-3.png||height="193" width="257"]]

899

900

901

== Battery Life Analyze ==

902

903

Dragino battery-powered products are all run in Low Power mode. User can check the guideline from this link to calculate the estimated battery life:

904

https:~/~/www.dragino.com/downloads/downloads/LoRa_End_Node/Battery_Analyze/DRAGINO_Battery_Life_Guide.pdf