Wiki source code of LDDS04 - LoRaWAN 4-Channels Distance Detection Sensor User Manual
Last modified by Xiaoling on 2025/04/27 14:32
Show last authors
author | version | line-number | content |
---|---|---|---|
1 | (% style="text-align:center" %) | ||
2 | [[image:image-20220611143226-1.png||height="568" width="437"]] | ||
3 | |||
4 | |||
5 | |||
6 | |||
7 | |||
8 | |||
9 | **Table of Contents:** | ||
10 | |||
11 | {{toc/}} | ||
12 | |||
13 | |||
14 | |||
15 | |||
16 | |||
17 | |||
18 | |||
19 | |||
20 | |||
21 | |||
22 | = 1. Introduction = | ||
23 | |||
24 | == 1.1 What is LoRaWAN 4-Channels Distance Sensor == | ||
25 | |||
26 | |||
27 | ((( | ||
28 | The Dragino LDDS04 is a (% style="color:blue" %)**LoRaWAN 4-Channels Distance Sensor**(%%) for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time. | ||
29 | ))) | ||
30 | |||
31 | ((( | ||
32 | The LDDS04 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc. | ||
33 | ))) | ||
34 | |||
35 | ((( | ||
36 | It detects the distance between the measured object and the sensor, and uploads the value via wireless to LoRaWAN IoT Server. | ||
37 | ))) | ||
38 | |||
39 | ((( | ||
40 | The LoRa wireless technology used in LDDS04 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. | ||
41 | ))) | ||
42 | |||
43 | ((( | ||
44 | LDDS04 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years. | ||
45 | ))) | ||
46 | |||
47 | ((( | ||
48 | Each LDDS04 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on. | ||
49 | ))) | ||
50 | |||
51 | |||
52 | == 1.2 Features == | ||
53 | |||
54 | |||
55 | * LoRaWAN 1.0.3 Class A | ||
56 | * Ultra-low power consumption | ||
57 | * Detect Range: Base on External Probe | ||
58 | * Monitor Battery Level | ||
59 | * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865 | ||
60 | * AT Commands to change parameters | ||
61 | * Uplink on periodically | ||
62 | * Downlink to change configure | ||
63 | * 8500mAh Battery for long term use | ||
64 | |||
65 | == 1.3 Applications == | ||
66 | |||
67 | |||
68 | * Horizontal distance measurement | ||
69 | * Parking management system | ||
70 | * Object proximity and presence detection | ||
71 | * Intelligent trash can management system | ||
72 | * Robot obstacle avoidance | ||
73 | * Automatic control | ||
74 | * Sewer | ||
75 | |||
76 | == 1.4 Pin mapping and power on == | ||
77 | |||
78 | |||
79 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654930101285-501.png?rev=1.1||alt="1654930101285-501.png"]] | ||
80 | |||
81 | |||
82 | == 1.5 Probe Options == | ||
83 | |||
84 | === 1.5.1 Probes Comparation === | ||
85 | |||
86 | |||
87 | (% border="1" cellspacing="3" style="width:505px" %) | ||
88 | |=(% style="width: 80px;background-color:#4F81BD;color:white" %)**Model**|=(% style="width: 147px;background-color:#4F81BD;color:white" %)**Photo**|=(% style="width: 278px;background-color:#4F81BD;color:white" %)**Description** | ||
89 | |(% style="width:78px" %)A01A-15|(% style="width:145px" %)((( | ||
90 | (% aria-label="1654931296150-422.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654931296150-422.png||data-widget="image" height="180" width="180"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
91 | |||
92 | |||
93 | |||
94 | )))|(% style="width:277px" %)((( | ||
95 | ((( | ||
96 | Detect Distance: 28 cm ~~ 750 cm | ||
97 | ))) | ||
98 | |||
99 | ((( | ||
100 | Blind Spot Distance: 0 ~~ 28cm | ||
101 | ))) | ||
102 | |||
103 | ((( | ||
104 | Accuracy: ±(1cm+S*0.3%) (S: Distance) | ||
105 | ))) | ||
106 | |||
107 | ((( | ||
108 | Measure Angle: ~~ 40° | ||
109 | ))) | ||
110 | |||
111 | ((( | ||
112 | Cable Length: 1.5 meter | ||
113 | ))) | ||
114 | |||
115 | ((( | ||
116 | Temperature Compensation | ||
117 | ))) | ||
118 | |||
119 | ((( | ||
120 | Suitable for Flat Object Detect | ||
121 | ))) | ||
122 | |||
123 | ((( | ||
124 | IP67 Water Proof | ||
125 | ))) | ||
126 | ))) | ||
127 | |(% style="width:78px" %)A02-15|(% style="width:145px" %)((( | ||
128 | [[image:image-20220611150955-2.png||data-widget="image" height="180" width="180"]] | ||
129 | |||
130 | |||
131 | |||
132 | )))|(% style="width:277px" %)((( | ||
133 | ((( | ||
134 | Detect Distance: 3cm ~~ 450cm | ||
135 | ))) | ||
136 | |||
137 | ((( | ||
138 | Blind Spot Distance: 0 ~~ 3cm | ||
139 | ))) | ||
140 | |||
141 | ((( | ||
142 | Accuracy: ±(1cm+S*0.3%) (S: Distance) | ||
143 | ))) | ||
144 | |||
145 | ((( | ||
146 | Measure Angle: ~~ 60° | ||
147 | ))) | ||
148 | |||
149 | ((( | ||
150 | Cable Length: 1.5 meter | ||
151 | ))) | ||
152 | |||
153 | ((( | ||
154 | Temperature Compensation | ||
155 | ))) | ||
156 | |||
157 | ((( | ||
158 | Suitable for Flat Object Detect, Rubbish Bin | ||
159 | ))) | ||
160 | |||
161 | ((( | ||
162 | IP67 Water Proof | ||
163 | ))) | ||
164 | ))) | ||
165 | |(% style="width:78px" %)A13-15|(% style="width:145px" %)((( | ||
166 | [[image:1654931353123-552.png||data-widget="image" height="180" width="180"]] | ||
167 | |||
168 | |||
169 | |||
170 | )))|(% style="width:277px" %)((( | ||
171 | ((( | ||
172 | Detect Distance: 25cm ~~ 200cm | ||
173 | ))) | ||
174 | |||
175 | ((( | ||
176 | Blind Spot Distance: 0 ~~ 25cm | ||
177 | ))) | ||
178 | |||
179 | ((( | ||
180 | Accuracy: ±(1cm+S*0.3%) (S: Distance) | ||
181 | ))) | ||
182 | |||
183 | ((( | ||
184 | Measure Angle: ~~ 20° | ||
185 | ))) | ||
186 | |||
187 | ((( | ||
188 | Cable Length: 1.5 meter | ||
189 | ))) | ||
190 | |||
191 | ((( | ||
192 | Temperature Compensation | ||
193 | ))) | ||
194 | |||
195 | ((( | ||
196 | Suitable for Flat Object Detect, Rubbish Bin | ||
197 | ))) | ||
198 | |||
199 | ((( | ||
200 | IP67 Water Proof | ||
201 | ))) | ||
202 | ))) | ||
203 | |(% style="width:78px" %)A16-15|(% style="width:145px" %)((( | ||
204 | [[image:1654931363281-306.png||data-widget="image" height="180" width="180"]] | ||
205 | |||
206 | |||
207 | |||
208 | )))|(% style="width:277px" %)((( | ||
209 | ((( | ||
210 | Detect Distance: 50cm ~~ 1500cm | ||
211 | ))) | ||
212 | |||
213 | ((( | ||
214 | Blind Spot Distance: 0 ~~ 50cm | ||
215 | ))) | ||
216 | |||
217 | ((( | ||
218 | Accuracy: ±(1cm+S*0.3%) (S: Distance) | ||
219 | ))) | ||
220 | |||
221 | ((( | ||
222 | Measure Angle: ~~ 40° | ||
223 | ))) | ||
224 | |||
225 | ((( | ||
226 | Cable Length: 1.5 meter | ||
227 | ))) | ||
228 | |||
229 | ((( | ||
230 | Temperature Compensation | ||
231 | ))) | ||
232 | |||
233 | ((( | ||
234 | Suitable for Long Distance Detect | ||
235 | ))) | ||
236 | |||
237 | ((( | ||
238 | IP67 Water Proof | ||
239 | ))) | ||
240 | ))) | ||
241 | |||
242 | === 1.5.2 P01A-15 probe === | ||
243 | |||
244 | |||
245 | ((( | ||
246 | A01A-15 is mainly used for plane distance measurement; it can carry out targeted measurement on plane objects and can measure long distances and high accuracy. | ||
247 | ))) | ||
248 | |||
249 | |||
250 | ((( | ||
251 | (% style="color:blue" %)**Beam Chart:** | ||
252 | ))) | ||
253 | |||
254 | ((( | ||
255 | **(1) The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.** | ||
256 | ))) | ||
257 | |||
258 | [[image:1654852253176-749.png||data-widget="image"]] | ||
259 | |||
260 | |||
261 | ((( | ||
262 | **(2)** **The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.** | ||
263 | ))) | ||
264 | |||
265 | [[image:1654852175653-550.png||data-widget="image"]] | ||
266 | |||
267 | |||
268 | |||
269 | (% style="color:blue" %)**Mechanical:** | ||
270 | |||
271 | [[image:image-20220611152848-11.png||data-widget="image"]] | ||
272 | |||
273 | |||
274 | [[image:1654932546845-829.png||data-widget="image"]] | ||
275 | |||
276 | |||
277 | [[image:image-20220611152934-12.png||data-widget="image"]] | ||
278 | |||
279 | |||
280 | (% style="color:blue" %)**Application:** | ||
281 | |||
282 | [[image:image-20220613093246-3.png||data-widget="image"]] | ||
283 | |||
284 | |||
285 | === 1.5.3 A02-15 probe === | ||
286 | |||
287 | (% id="cke_bm_620491S" style="color:blue; display:none" %)** ** | ||
288 | |||
289 | |||
290 | ((( | ||
291 | (% style="color:blue" %)**Beam Chart:** | ||
292 | ))) | ||
293 | |||
294 | ((( | ||
295 | **(1) The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.** | ||
296 | ))) | ||
297 | |||
298 | [[image:1654934329751-424.png||data-widget="image"]] | ||
299 | |||
300 | |||
301 | |||
302 | ((( | ||
303 | **(2)** **The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.** | ||
304 | ))) | ||
305 | |||
306 | [[image:1654934343649-264.png||data-widget="image"]] | ||
307 | |||
308 | |||
309 | (% style="color:blue" %)**Mechanical:** | ||
310 | |||
311 | [[image:1654932923252-110.png||data-widget="image"]] | ||
312 | |||
313 | |||
314 | (% style="color:blue" %)**Application:** | ||
315 | |||
316 | [[image:image-20220611153001-13.png||data-widget="image"]] | ||
317 | |||
318 | |||
319 | === 1.5.4 A13-15 probe === | ||
320 | |||
321 | (% id="cke_bm_695100S" style="color:blue; display:none" %)** ** | ||
322 | |||
323 | |||
324 | ((( | ||
325 | (% style="color:blue" %)**Beam Chart:** | ||
326 | ))) | ||
327 | |||
328 | ((( | ||
329 | **(1) The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.** | ||
330 | ))) | ||
331 | |||
332 | [[image:1654934363730-880.png||data-widget="image"]] | ||
333 | |||
334 | |||
335 | ((( | ||
336 | **(2)** **The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.** | ||
337 | ))) | ||
338 | |||
339 | |||
340 | ((( | ||
341 | (% style="color:blue" %)**Mechanical:** | ||
342 | ))) | ||
343 | |||
344 | [[image:image-20220611154330-16.png||data-widget="image"]] | ||
345 | |||
346 | |||
347 | (% style="color:blue" %)**Installation Requirement:** | ||
348 | |||
349 | [[image:1654933425011-311.png||data-widget="image" height="649" width="747"]] | ||
350 | |||
351 | |||
352 | (% style="color:blue" %)**Application:** | ||
353 | |||
354 | [[image:image-20220613093149-2.png||data-widget="image"]] | ||
355 | |||
356 | |||
357 | === 1.5.5 A13-16 probe === | ||
358 | |||
359 | (% id="cke_bm_695100S" style="color:blue; display:none" %)** ** | ||
360 | |||
361 | |||
362 | ((( | ||
363 | (% style="color:blue" %)**Beam Chart:** | ||
364 | ))) | ||
365 | |||
366 | ((( | ||
367 | **(1) The tested object is a white cylindrical tube made of PVC, with a height of 100cm and a diameter of 7.5cm.** | ||
368 | ))) | ||
369 | |||
370 | [[image:1654934415156-713.png||data-widget="image"]] | ||
371 | |||
372 | |||
373 | ((( | ||
374 | **(2)** **The object to be tested is a "corrugated cardboard box" perpendicular to the central axis of 0 °, and the length * width is 60cm * 50cm.** | ||
375 | |||
376 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/1654934424571-232.png?rev=1.1||alt="1654934424571-232.png"]] | ||
377 | |||
378 | |||
379 | ))) | ||
380 | |||
381 | (% style="color:blue" %)**Mechanical:** | ||
382 | |||
383 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220611160117-1.png?rev=1.1||alt="image-20220611160117-1.png"]] | ||
384 | |||
385 | |||
386 | (% style="color:blue" %)**Application:** | ||
387 | |||
388 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220613093102-1.png?rev=1.1||alt="image-20220613093102-1.png"]] | ||
389 | |||
390 | |||
391 | = 2. Configure LDDS04 to connect to LoRaWAN network = | ||
392 | |||
393 | == 2.1 How it works == | ||
394 | |||
395 | |||
396 | The LDDS04 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LDDS04. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes. | ||
397 | |||
398 | |||
399 | == 2.2 Connect Probe == | ||
400 | |||
401 | |||
402 | LDDS04 has a converter, User need to connect the Ultrasonic Probes to the convert as below. Different probes are supported, please see this link for the probe options. | ||
403 | |||
404 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220611160853-2.png?width=407&height=351&rev=1.1||alt="image-20220611160853-2.png" height="351" width="407"]] | ||
405 | |||
406 | Probe mapping as below. | ||
407 | |||
408 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDDS04%20-%20LoRaWAN%204-Channels%20Distance%20Detection%20Sensor%20User%20Manual/WebHome/image-20220611160853-3.png?width=746&height=463&rev=1.1||alt="image-20220611160853-3.png" height="463" width="746"]] | ||
409 | |||
410 | | ||
411 | |||
412 | == 2.3 Quick guide to connect to LoRaWAN server (OTAA) == | ||
413 | |||
414 | |||
415 | Below is the network structure; we use the [[DLOS8 >>url:https://www.dragino.com/products/lora-lorawan-gateway/item/160-dlos8.html]] as a LoRaWAN gateway in this example. | ||
416 | |||
417 | (% aria-label="1654935011447-935.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654935011447-935.png||data-widget="image" height="410" width="802"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
418 | (% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
419 | |||
420 | ((( | ||
421 | The DLOS8 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server. | ||
422 | ))) | ||
423 | |||
424 | ((( | ||
425 | |||
426 | |||
427 | (% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LDDS04. | ||
428 | ))) | ||
429 | |||
430 | ((( | ||
431 | Each LDDS04 is shipped with a sticker with the default device keys, user can find this sticker in the box. it looks like below: | ||
432 | ))) | ||
433 | |||
434 | (% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20230426083617-1.png?rev=1.1||alt="image-20230426083617-1.png" height="222" width="478"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
435 | |||
436 | |||
437 | ((( | ||
438 | You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot: | ||
439 | |||
440 | **Create the application.** | ||
441 | |||
442 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SAC01L_LoRaWAN_Temperature%26Humidity_Sensor_User_Manual/WebHome/image-20250423093843-1.png?width=756&height=264&rev=1.1||alt="image-20250423093843-1.png"]] | ||
443 | |||
444 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111305-2.png?width=1000&height=572&rev=1.1||alt="image-20240907111305-2.png"]] | ||
445 | |||
446 | |||
447 | **Add devices to the created Application.** | ||
448 | |||
449 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111659-3.png?width=977&height=185&rev=1.1||alt="image-20240907111659-3.png"]] | ||
450 | |||
451 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111820-5.png?width=975&height=377&rev=1.1||alt="image-20240907111820-5.png"]] | ||
452 | |||
453 | |||
454 | **Enter end device specifics manually.** | ||
455 | |||
456 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112136-6.png?width=697&height=687&rev=1.1||alt="image-20240907112136-6.png"]] | ||
457 | |||
458 | |||
459 | **Add DevEUI and AppKey. Customize a platform ID for the device.** | ||
460 | |||
461 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112427-7.png?rev=1.1||alt="image-20240907112427-7.png"]] | ||
462 | |||
463 | |||
464 | (% style="color:blue" %)**Step 2**(%%): Add decoder. | ||
465 | |||
466 | In TTN, user can add a custom payload so it shows friendly reading. | ||
467 | |||
468 | Click this link to get the decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/]] | ||
469 | |||
470 | Below is TTN screen shot: | ||
471 | |||
472 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140556-1.png?width=1184&height=488&rev=1.1||alt="image-20241009140556-1.png" height="488" width="1184"]] | ||
473 | |||
474 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS25-LBLDS25-LS--LoRaWAN_LiDAR_Distance_Auto-Clean_Sensor_User_Manual/WebHome/image-20241009140603-2.png?width=1168&height=562&rev=1.1||alt="image-20241009140603-2.png" height="562" width="1168"]] | ||
475 | |||
476 | (% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
477 | ))) | ||
478 | |||
479 | (% style="color:blue" %)**Step 3**(%%): Power on LDDS04 | ||
480 | |||
481 | Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position). | ||
482 | |||
483 | |||
484 | (% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% title="Click and drag to resize" %)(% aria-label="1654935407017-525.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654935407017-525.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](%%)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
485 | |||
486 | The LDDS04 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel. | ||
487 | |||
488 | (% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% title="Click and drag to resize" %)(% aria-label="1654935473814-664.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654935473814-664.png||data-widget="image" height="203" width="744"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](%%)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% title="Click and drag to resize" %) | ||
489 | |||
490 | |||
491 | == 2.4 Uplink Payload == | ||
492 | |||
493 | |||
494 | ((( | ||
495 | ((( | ||
496 | ((( | ||
497 | LDDS04 will uplink payload via LoRaWAN with below payload format: | ||
498 | ))) | ||
499 | |||
500 | ((( | ||
501 | Uplink payload includes in total 11 bytes.(% style="display:none" %) | ||
502 | ))) | ||
503 | ))) | ||
504 | ))) | ||
505 | |||
506 | (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %) | ||
507 | |=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)((( | ||
508 | **Size(bytes)** | ||
509 | )))|=(% style="width: 62.5px;background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)2|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)1 | ||
510 | |(% style="width:62.5px" %)Value|((( | ||
511 | [[BAT>>||anchor="H2.4.1A0BatteryInfo"]] & | ||
512 | [[Interrupt flag>>||anchor="H2.4.2A0InterruptPin"]] | ||
513 | )))|((( | ||
514 | [[Distance of UT sensor1>>||anchor="H2.4.3A0Distance"]] | ||
515 | )))|((( | ||
516 | [[Distance of UT sensor2>>||anchor="H2.4.3A0Distance"]] | ||
517 | )))|((( | ||
518 | [[Distance of UT sensor3>>||anchor="H2.4.3A0Distance"]] | ||
519 | )))|((( | ||
520 | [[Distance of UT sensor4>>||anchor="H2.4.3A0Distance"]] | ||
521 | )))|((( | ||
522 | [[Message Type>>||anchor="H2.4.4A0MessageType"]] | ||
523 | ))) | ||
524 | |||
525 | (% aria-label="1654935473814-664.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654935473814-664.png||data-widget="image" height="199" width="729"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
526 | |||
527 | |||
528 | === 2.4.1 Battery Info === | ||
529 | |||
530 | |||
531 | Check the battery voltage for LDDS04. | ||
532 | |||
533 | Ex1: 0x0B45 = 2885mV | ||
534 | |||
535 | Ex2: 0x0B49 = 2889mV | ||
536 | |||
537 | |||
538 | === 2.4.2 Interrupt Pin === | ||
539 | |||
540 | |||
541 | ((( | ||
542 | This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2A0SetInterruptMode"]] for the hardware and software set up. | ||
543 | ))) | ||
544 | |||
545 | ((( | ||
546 | (% style="color:red" %)**Note: **(%%)The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>||anchor="H1.4A0Pinmappingandpoweron"]]. | ||
547 | ))) | ||
548 | |||
549 | ((( | ||
550 | |||
551 | ))) | ||
552 | |||
553 | ((( | ||
554 | **Example:** | ||
555 | ))) | ||
556 | |||
557 | ((( | ||
558 | (0x0D4A & 0x8000) >>15 = 0: Normal uplink packet. | ||
559 | ))) | ||
560 | |||
561 | ((( | ||
562 | (0x8D41 & (% title="Click and drag to resize" %)0x8000)(%%) >>15 = 1: Interrupt Uplink Packet. | ||
563 | ))) | ||
564 | |||
565 | (% style="display:none" %) (%%) | ||
566 | |||
567 | === 2.4.3 Distance === | ||
568 | |||
569 | |||
570 | ((( | ||
571 | ((( | ||
572 | The measuring distance of the four distance measuring modules, the default unit is cm.(% style="display:none" %) | ||
573 | ))) | ||
574 | |||
575 | ((( | ||
576 | **Example**: | ||
577 | ))) | ||
578 | |||
579 | ((( | ||
580 | Uplink Payload: 0D 4A 03 16 03 18 03 1A 03 15 01 | ||
581 | ))) | ||
582 | |||
583 | ((( | ||
584 | (% style="display:none" %) (%%) | ||
585 | ))) | ||
586 | |||
587 | ((( | ||
588 | (% title="Click and drag to resize" %)**Data analysis:** | ||
589 | ))) | ||
590 | |||
591 | ((( | ||
592 | Distance of UT sensor1 : 0316(H) = 790 (D)/10 = 79cm. | ||
593 | ))) | ||
594 | |||
595 | ((( | ||
596 | Distance of UT sensor2 : 0318(H) = 792 (D)/10 = 79.2cm. | ||
597 | ))) | ||
598 | |||
599 | ((( | ||
600 | Distance of UT sensor3 : 031A(H) = 794 (D)/10 = 79.4cm. | ||
601 | ))) | ||
602 | |||
603 | ((( | ||
604 | Distance of UT sensor4 : 0315(H) = 789 (D)/10 = 78.9cm. | ||
605 | ))) | ||
606 | ))) | ||
607 | |||
608 | |||
609 | === 2.4.4 Message Type === | ||
610 | |||
611 | ((( | ||
612 | |||
613 | |||
614 | For a normal uplink payload, the message type is always 0x01. | ||
615 | ))) | ||
616 | |||
617 | ((( | ||
618 | Valid Message Type:(% style="display:none" %) | ||
619 | ))) | ||
620 | |||
621 | (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:499px" %) | ||
622 | |=(% style="width: 161px;background-color:#4F81BD;color:white" %)**Message Type Code**|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**Description**|=(% style="width: 174px;background-color:#4F81BD;color:white" %)**Payload** | ||
623 | |(% style="width:160px" %)0x01|(% style="width:163px" %)Normal Uplink|(% style="width:173px" %)[[Normal Uplink Payload>>||anchor="H2.4A0200BUplinkPayload"]] | ||
624 | |(% style="width:160px" %)0x02|(% style="width:163px" %)Reply configures info|(% style="width:173px" %)[[Configure Info Payload>>||anchor="H3.3A0GetFirmwareVersionInfo"]] | ||
625 | |||
626 | [[image:1654936589640-122.png||data-widget="image" height="248" width="806"]] | ||
627 | |||
628 | |||
629 | === 2.4.5 Decode payload in The Things Network === | ||
630 | |||
631 | |||
632 | While using TTN network, you can add the payload format to decode the payload. | ||
633 | |||
634 | [[image:1654936675588-151.png||data-widget="image" height="379" width="762"]] | ||
635 | |||
636 | |||
637 | The payload decoder function for TTN is here: | ||
638 | |||
639 | LDDS04 TTN Payload Decoder: [[ttps:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]] | ||
640 | |||
641 | |||
642 | **//function Decoder(bytes, port) {//** | ||
643 | |||
644 | **// var decode = {};//** | ||
645 | |||
646 | **// var value=(bytes[0]<<8 | bytes[1]) & 0x3FFF;//** | ||
647 | |||
648 | **// decode.BatV= value/1000;//** | ||
649 | |||
650 | **// decode.EXTI_Trigger=(bytes[0] & 0x80)? "TRUE":"FALSE";//** | ||
651 | |||
652 | **// decode.distance1_cm=(bytes[2]<<8 | bytes[3])/10;//** | ||
653 | |||
654 | **// decode.distance2_cm=(bytes[4]<<8 | bytes[5])/10;//** | ||
655 | |||
656 | **// decode.distance3_cm=(bytes[6]<<8 | bytes[7])/10//** | ||
657 | |||
658 | **// decode.distance4_cm=(bytes[8]<<8 | bytes[9])/10;//** | ||
659 | |||
660 | **// decode.mes_type= bytes[10];//** | ||
661 | |||
662 | |||
663 | **// if(!((bytes[0]==0x03)&&(bytes[10]==0x02~)~)~)//** | ||
664 | |||
665 | **// {//** | ||
666 | |||
667 | **// return decode;//** | ||
668 | |||
669 | **// }//** | ||
670 | |||
671 | **//}//** | ||
672 | |||
673 | |||
674 | |||
675 | == 2.5 Uplink Interval == | ||
676 | |||
677 | |||
678 | The LDDS04 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]] | ||
679 | |||
680 | |||
681 | == 2.6 Show Data in DataCake IoT Server == | ||
682 | |||
683 | |||
684 | ((( | ||
685 | [[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps: | ||
686 | ))) | ||
687 | |||
688 | ((( | ||
689 | |||
690 | ))) | ||
691 | |||
692 | ((( | ||
693 | (% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.** | ||
694 | ))) | ||
695 | |||
696 | ((( | ||
697 | (% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:** | ||
698 | ))) | ||
699 | |||
700 | |||
701 | (% aria-label="1654592790040-760.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654592790040-760.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
702 | |||
703 | |||
704 | (% aria-label="1654592800389-571.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:1654592800389-571.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)(%%) | ||
705 | |||
706 | |||
707 | (% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.** | ||
708 | |||
709 | (% style="color:blue" %)**Step 4**(%%)**: Create LDDS04 product. ** | ||
710 | |||
711 | |||
712 | |||
713 | (% aria-label="image-20220611164604-7.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-7.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
714 | |||
715 | |||
716 | |||
717 | (% aria-label="image-20220611164604-8.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-8.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
718 | |||
719 | |||
720 | (% aria-label="image-20220611164604-9.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-9.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
721 | |||
722 | |||
723 | (% style="color:blue" %)**Step 5**(%%)**: ** **add payload decode** | ||
724 | |||
725 | |||
726 | (% aria-label="image-20220611164604-10.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-10.png||data-widget="image" height="394" width="923"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
727 | |||
728 | |||
729 | (% aria-label="image-20220611164604-11.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-11.png||data-widget="image" height="303" width="931"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
730 | |||
731 | |||
732 | (% aria-label="image-20220611164604-12.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-12.png||data-widget="image" height="331" width="897"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
733 | |||
734 | |||
735 | After added, the sensor data arrive TTN, it will also arrive and show in Datacake. | ||
736 | |||
737 | (% aria-label="image-20220611164604-13.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-13.png||data-widget="image" height="215" width="899"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
738 | |||
739 | |||
740 | (% aria-label="image-20220611164604-14.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-14.png||data-widget="image" height="632" width="824"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
741 | |||
742 | |||
743 | (% aria-label="image-20220611164604-15.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-15.png||data-widget="image"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
744 | |||
745 | |||
746 | (% aria-label="image-20220611164604-16.png image widget" contenteditable="false" role="region" tabindex="-1" %)[[image:image-20220611164604-16.png||data-widget="image" height="409" width="833"]](% style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% title="Click and drag to resize" %) | ||
747 | |||
748 | |||
749 | == 2.7 Frequency Plans == | ||
750 | |||
751 | |||
752 | ((( | ||
753 | ((( | ||
754 | The LDDS04 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets. | ||
755 | ))) | ||
756 | ))) | ||
757 | |||
758 | |||
759 | === 2.7.1 EU863-870 (EU868) === | ||
760 | |||
761 | |||
762 | ((( | ||
763 | (% style="color:blue" %)**Uplink:** | ||
764 | ))) | ||
765 | |||
766 | ((( | ||
767 | 868.1 - SF7BW125 to SF12BW125 | ||
768 | ))) | ||
769 | |||
770 | ((( | ||
771 | 868.3 - SF7BW125 to SF12BW125 and SF7BW250 | ||
772 | ))) | ||
773 | |||
774 | ((( | ||
775 | 868.5 - SF7BW125 to SF12BW125 | ||
776 | ))) | ||
777 | |||
778 | ((( | ||
779 | 867.1 - SF7BW125 to SF12BW125 | ||
780 | ))) | ||
781 | |||
782 | ((( | ||
783 | 867.3 - SF7BW125 to SF12BW125 | ||
784 | ))) | ||
785 | |||
786 | ((( | ||
787 | 867.5 - SF7BW125 to SF12BW125 | ||
788 | ))) | ||
789 | |||
790 | ((( | ||
791 | 867.7 - SF7BW125 to SF12BW125 | ||
792 | ))) | ||
793 | |||
794 | ((( | ||
795 | 867.9 - SF7BW125 to SF12BW125 | ||
796 | ))) | ||
797 | |||
798 | ((( | ||
799 | 868.8 - FSK | ||
800 | ))) | ||
801 | |||
802 | ((( | ||
803 | |||
804 | ))) | ||
805 | |||
806 | ((( | ||
807 | (% style="color:blue" %)**Downlink:** | ||
808 | ))) | ||
809 | |||
810 | ((( | ||
811 | Uplink channels 1-9 (RX1) | ||
812 | ))) | ||
813 | |||
814 | ((( | ||
815 | 869.525 - SF9BW125 (RX2 downlink only) | ||
816 | ))) | ||
817 | |||
818 | |||
819 | === 2.7.2 US902-928(US915) === | ||
820 | |||
821 | ((( | ||
822 | |||
823 | |||
824 | ((( | ||
825 | Used in USA, Canada, and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document. | ||
826 | ))) | ||
827 | |||
828 | ((( | ||
829 | To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join. | ||
830 | ))) | ||
831 | |||
832 | ((( | ||
833 | |||
834 | ))) | ||
835 | |||
836 | ((( | ||
837 | After Join success, the end node will switch to the correct sub band by: | ||
838 | ))) | ||
839 | |||
840 | * ((( | ||
841 | Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band | ||
842 | ))) | ||
843 | * ((( | ||
844 | Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include) | ||
845 | ))) | ||
846 | ))) | ||
847 | |||
848 | |||
849 | (% style="display:none" %) (%%) | ||
850 | |||
851 | === 2.7.3 CN470-510 (CN470) === | ||
852 | |||
853 | |||
854 | ((( | ||
855 | Used in China, Default use CHE=1 | ||
856 | ))) | ||
857 | |||
858 | ((( | ||
859 | (% style="color:blue" %)**Uplink:** | ||
860 | ))) | ||
861 | |||
862 | ((( | ||
863 | 486.3 - SF7BW125 to SF12BW125 | ||
864 | ))) | ||
865 | |||
866 | ((( | ||
867 | 486.5 - SF7BW125 to SF12BW125 | ||
868 | ))) | ||
869 | |||
870 | ((( | ||
871 | 486.7 - SF7BW125 to SF12BW125 | ||
872 | ))) | ||
873 | |||
874 | ((( | ||
875 | 486.9 - SF7BW125 to SF12BW125 | ||
876 | ))) | ||
877 | |||
878 | ((( | ||
879 | 487.1 - SF7BW125 to SF12BW125 | ||
880 | ))) | ||
881 | |||
882 | ((( | ||
883 | 487.3 - SF7BW125 to SF12BW125 | ||
884 | ))) | ||
885 | |||
886 | ((( | ||
887 | 487.5 - SF7BW125 to SF12BW125 | ||
888 | ))) | ||
889 | |||
890 | ((( | ||
891 | 487.7 - SF7BW125 to SF12BW125 | ||
892 | ))) | ||
893 | |||
894 | ((( | ||
895 | |||
896 | ))) | ||
897 | |||
898 | ((( | ||
899 | (% style="color:blue" %)**Downlink:** | ||
900 | ))) | ||
901 | |||
902 | ((( | ||
903 | 506.7 - SF7BW125 to SF12BW125 | ||
904 | ))) | ||
905 | |||
906 | ((( | ||
907 | 506.9 - SF7BW125 to SF12BW125 | ||
908 | ))) | ||
909 | |||
910 | ((( | ||
911 | 507.1 - SF7BW125 to SF12BW125 | ||
912 | ))) | ||
913 | |||
914 | ((( | ||
915 | 507.3 - SF7BW125 to SF12BW125 | ||
916 | ))) | ||
917 | |||
918 | ((( | ||
919 | 507.5 - SF7BW125 to SF12BW125 | ||
920 | ))) | ||
921 | |||
922 | ((( | ||
923 | 507.7 - SF7BW125 to SF12BW125 | ||
924 | ))) | ||
925 | |||
926 | ((( | ||
927 | 507.9 - SF7BW125 to SF12BW125 | ||
928 | ))) | ||
929 | |||
930 | ((( | ||
931 | 508.1 - SF7BW125 to SF12BW125 | ||
932 | ))) | ||
933 | |||
934 | ((( | ||
935 | 505.3 - SF12BW125 (RX2 downlink only) | ||
936 | ))) | ||
937 | |||
938 | |||
939 | === 2.7.4 AU915-928(AU915) === | ||
940 | |||
941 | ((( | ||
942 | |||
943 | |||
944 | ((( | ||
945 | Frequency band as per definition in LoRaWAN 1.0.3 Regional document. | ||
946 | ))) | ||
947 | |||
948 | ((( | ||
949 | To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join. | ||
950 | ))) | ||
951 | |||
952 | ((( | ||
953 | |||
954 | ))) | ||
955 | |||
956 | ((( | ||
957 | After Join success, the end node will switch to the correct sub band by: | ||
958 | ))) | ||
959 | |||
960 | * ((( | ||
961 | Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band | ||
962 | ))) | ||
963 | * ((( | ||
964 | Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include) | ||
965 | ))) | ||
966 | ))) | ||
967 | |||
968 | (% style="display:none" %) (%%) | ||
969 | |||
970 | (% style="display:none" %) (%%) | ||
971 | |||
972 | === 2.7.5 AS920-923 & AS923-925 (AS923) === | ||
973 | |||
974 | |||
975 | ((( | ||
976 | (% style="color:blue" %)**Default Uplink channel:** | ||
977 | ))) | ||
978 | |||
979 | ((( | ||
980 | 923.2 - SF7BW125 to SF10BW125 | ||
981 | ))) | ||
982 | |||
983 | ((( | ||
984 | 923.4 - SF7BW125 to SF10BW125 | ||
985 | ))) | ||
986 | |||
987 | ((( | ||
988 | |||
989 | ))) | ||
990 | |||
991 | ((( | ||
992 | (% style="color:blue" %)**Additional Uplink Channel**: | ||
993 | ))) | ||
994 | |||
995 | ((( | ||
996 | (OTAA mode, channel added by JoinAccept message) | ||
997 | ))) | ||
998 | |||
999 | ((( | ||
1000 | |||
1001 | ))) | ||
1002 | |||
1003 | ((( | ||
1004 | (% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**: | ||
1005 | ))) | ||
1006 | |||
1007 | ((( | ||
1008 | 922.2 - SF7BW125 to SF10BW125 | ||
1009 | ))) | ||
1010 | |||
1011 | ((( | ||
1012 | 922.4 - SF7BW125 to SF10BW125 | ||
1013 | ))) | ||
1014 | |||
1015 | ((( | ||
1016 | 922.6 - SF7BW125 to SF10BW125 | ||
1017 | ))) | ||
1018 | |||
1019 | ((( | ||
1020 | 922.8 - SF7BW125 to SF10BW125 | ||
1021 | ))) | ||
1022 | |||
1023 | ((( | ||
1024 | 923.0 - SF7BW125 to SF10BW125 | ||
1025 | ))) | ||
1026 | |||
1027 | ((( | ||
1028 | 922.0 - SF7BW125 to SF10BW125 | ||
1029 | ))) | ||
1030 | |||
1031 | ((( | ||
1032 | |||
1033 | ))) | ||
1034 | |||
1035 | ((( | ||
1036 | (% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**: | ||
1037 | ))) | ||
1038 | |||
1039 | ((( | ||
1040 | 923.6 - SF7BW125 to SF10BW125 | ||
1041 | ))) | ||
1042 | |||
1043 | ((( | ||
1044 | 923.8 - SF7BW125 to SF10BW125 | ||
1045 | ))) | ||
1046 | |||
1047 | ((( | ||
1048 | 924.0 - SF7BW125 to SF10BW125 | ||
1049 | ))) | ||
1050 | |||
1051 | ((( | ||
1052 | 924.2 - SF7BW125 to SF10BW125 | ||
1053 | ))) | ||
1054 | |||
1055 | ((( | ||
1056 | 924.4 - SF7BW125 to SF10BW125 | ||
1057 | ))) | ||
1058 | |||
1059 | ((( | ||
1060 | 924.6 - SF7BW125 to SF10BW125 | ||
1061 | ))) | ||
1062 | |||
1063 | ((( | ||
1064 | |||
1065 | ))) | ||
1066 | |||
1067 | ((( | ||
1068 | (% style="color:blue" %)**Downlink:** | ||
1069 | ))) | ||
1070 | |||
1071 | ((( | ||
1072 | Uplink channels 1-8 (RX1) | ||
1073 | ))) | ||
1074 | |||
1075 | ((( | ||
1076 | 923.2 - SF10BW125 (RX2) | ||
1077 | ))) | ||
1078 | |||
1079 | |||
1080 | === 2.7.6 KR920-923 (KR920) === | ||
1081 | |||
1082 | |||
1083 | ((( | ||
1084 | (% style="color:blue" %)**Default channel:** | ||
1085 | ))) | ||
1086 | |||
1087 | ((( | ||
1088 | 922.1 - SF7BW125 to SF12BW125 | ||
1089 | ))) | ||
1090 | |||
1091 | ((( | ||
1092 | 922.3 - SF7BW125 to SF12BW125 | ||
1093 | ))) | ||
1094 | |||
1095 | ((( | ||
1096 | 922.5 - SF7BW125 to SF12BW125 | ||
1097 | ))) | ||
1098 | |||
1099 | ((( | ||
1100 | |||
1101 | ))) | ||
1102 | |||
1103 | ((( | ||
1104 | (% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)** | ||
1105 | ))) | ||
1106 | |||
1107 | ((( | ||
1108 | 922.1 - SF7BW125 to SF12BW125 | ||
1109 | ))) | ||
1110 | |||
1111 | ((( | ||
1112 | 922.3 - SF7BW125 to SF12BW125 | ||
1113 | ))) | ||
1114 | |||
1115 | ((( | ||
1116 | 922.5 - SF7BW125 to SF12BW125 | ||
1117 | ))) | ||
1118 | |||
1119 | ((( | ||
1120 | 922.7 - SF7BW125 to SF12BW125 | ||
1121 | ))) | ||
1122 | |||
1123 | ((( | ||
1124 | 922.9 - SF7BW125 to SF12BW125 | ||
1125 | ))) | ||
1126 | |||
1127 | ((( | ||
1128 | 923.1 - SF7BW125 to SF12BW125 | ||
1129 | ))) | ||
1130 | |||
1131 | ((( | ||
1132 | 923.3 - SF7BW125 to SF12BW125 | ||
1133 | ))) | ||
1134 | |||
1135 | ((( | ||
1136 | |||
1137 | ))) | ||
1138 | |||
1139 | ((( | ||
1140 | (% style="color:blue" %)**Downlink:** | ||
1141 | ))) | ||
1142 | |||
1143 | ((( | ||
1144 | Uplink channels 1-7(RX1) | ||
1145 | ))) | ||
1146 | |||
1147 | ((( | ||
1148 | 921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125) | ||
1149 | ))) | ||
1150 | |||
1151 | |||
1152 | === 2.7.7 IN865-867 (IN865) === | ||
1153 | |||
1154 | |||
1155 | ((( | ||
1156 | (% style="color:blue" %)**Uplink:** | ||
1157 | ))) | ||
1158 | |||
1159 | ((( | ||
1160 | 865.0625 - SF7BW125 to SF12BW125 | ||
1161 | ))) | ||
1162 | |||
1163 | ((( | ||
1164 | 865.4025 - SF7BW125 to SF12BW125 | ||
1165 | ))) | ||
1166 | |||
1167 | ((( | ||
1168 | 865.9850 - SF7BW125 to SF12BW125 | ||
1169 | ))) | ||
1170 | |||
1171 | ((( | ||
1172 | |||
1173 | ))) | ||
1174 | |||
1175 | ((( | ||
1176 | (% style="color:blue" %)**Downlink:** | ||
1177 | ))) | ||
1178 | |||
1179 | ((( | ||
1180 | Uplink channels 1-3 (RX1) | ||
1181 | ))) | ||
1182 | |||
1183 | ((( | ||
1184 | 866.550 - SF10BW125 (RX2) | ||
1185 | ))) | ||
1186 | |||
1187 | |||
1188 | == 2.8 LED Indicator == | ||
1189 | |||
1190 | |||
1191 | The LDDS04 has an internal LED which is used to show the status of different state. | ||
1192 | |||
1193 | |||
1194 | * After LDDS04 is turned on, if the 4 channels converter is detected, the LED will (% style="color:green" %)**flash 4 times quickly**. | ||
1195 | |||
1196 | * (% style="color:green" %)**Blink once**(%%) when device transmit a packet. | ||
1197 | |||
1198 | * Solid ON for (% style="color:green" %)**Five Seconds**(%%) when OTAA Join Successfully. | ||
1199 | |||
1200 | == 2.9 Firmware Change Log == | ||
1201 | |||
1202 | |||
1203 | **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/q25x7twbj031usi/AAAkI5LmJYIqdnDkYvHjiLyba?dl=0>>https://www.dropbox.com/sh/q25x7twbj031usi/AAAkI5LmJYIqdnDkYvHjiLyba?dl=0]] | ||
1204 | |||
1205 | **Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]] | ||
1206 | |||
1207 | |||
1208 | = 3. Configure LDDS04 via AT Command or LoRaWAN Downlink = | ||
1209 | |||
1210 | |||
1211 | ((( | ||
1212 | ((( | ||
1213 | Use can configure LDDS04 via AT Command or LoRaWAN Downlink. | ||
1214 | ))) | ||
1215 | ))) | ||
1216 | |||
1217 | * ((( | ||
1218 | ((( | ||
1219 | AT Command Connection: See [[FAQ>>||anchor="H6.A0FAQ"]]. | ||
1220 | ))) | ||
1221 | ))) | ||
1222 | * ((( | ||
1223 | ((( | ||
1224 | LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]] | ||
1225 | ))) | ||
1226 | ))) | ||
1227 | |||
1228 | ((( | ||
1229 | ((( | ||
1230 | |||
1231 | ))) | ||
1232 | |||
1233 | ((( | ||
1234 | There are two kinds of commands to configure LDDS04, they are: | ||
1235 | ))) | ||
1236 | ))) | ||
1237 | |||
1238 | * ((( | ||
1239 | ((( | ||
1240 | (% style="color:#4f81bd" %)** General Commands**. | ||
1241 | ))) | ||
1242 | ))) | ||
1243 | |||
1244 | ((( | ||
1245 | ((( | ||
1246 | These commands are to configure: | ||
1247 | ))) | ||
1248 | ))) | ||
1249 | |||
1250 | * ((( | ||
1251 | ((( | ||
1252 | General system settings like: uplink interval. | ||
1253 | ))) | ||
1254 | ))) | ||
1255 | * ((( | ||
1256 | ((( | ||
1257 | LoRaWAN protocol & radio related command. | ||
1258 | ))) | ||
1259 | ))) | ||
1260 | |||
1261 | ((( | ||
1262 | ((( | ||
1263 | They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki: [[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]] | ||
1264 | ))) | ||
1265 | ))) | ||
1266 | |||
1267 | |||
1268 | * ((( | ||
1269 | ((( | ||
1270 | (% style="color:#4f81bd" %)** Commands special design for LDDS04** | ||
1271 | ))) | ||
1272 | ))) | ||
1273 | |||
1274 | ((( | ||
1275 | ((( | ||
1276 | These commands only valid for LDDS04, as below:(% title="Click and drag to resize" %) | ||
1277 | ))) | ||
1278 | ))) | ||
1279 | |||
1280 | |||
1281 | == 3.1 Set Transmit Interval Time == | ||
1282 | |||
1283 | |||
1284 | Feature: Change LoRaWAN End Node Transmit Interval. | ||
1285 | |||
1286 | (% style="color:#037691" %)**AT Command: AT+TDC** | ||
1287 | |||
1288 | (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %) | ||
1289 | |=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 140px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 210px;background-color:#4F81BD;color:white" %)**Response** | ||
1290 | |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|((( | ||
1291 | 30000 | ||
1292 | OK | ||
1293 | the interval is 30000ms = 30s | ||
1294 | ))) | ||
1295 | |(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|((( | ||
1296 | OK | ||
1297 | Set transmit interval to 60000ms = 60 seconds | ||
1298 | ))) | ||
1299 | |||
1300 | ((( | ||
1301 | (% style="color:#037691" %)**Downlink Command: 0x01** | ||
1302 | ))) | ||
1303 | |||
1304 | ((( | ||
1305 | ((( | ||
1306 | Format: Command Code (0x01) followed by 3 bytes time value. | ||
1307 | |||
1308 | ((( | ||
1309 | If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01. | ||
1310 | ))) | ||
1311 | |||
1312 | * Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds | ||
1313 | * Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds | ||
1314 | ))) | ||
1315 | ))) | ||
1316 | |||
1317 | |||
1318 | |||
1319 | == 3.2 Set Interrupt Mode == | ||
1320 | |||
1321 | |||
1322 | ((( | ||
1323 | Feature, Set Interrupt mode for GPIO_EXIT. | ||
1324 | ))) | ||
1325 | |||
1326 | ((( | ||
1327 | (% style="color:#037691" %)**Downlink Command: AT+INTMOD** | ||
1328 | ))) | ||
1329 | |||
1330 | (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %) | ||
1331 | |=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response** | ||
1332 | |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)((( | ||
1333 | 0 | ||
1334 | OK | ||
1335 | the mode is 0 =No Interruption | ||
1336 | ))) | ||
1337 | |(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)((( | ||
1338 | Set Transmit Interval | ||
1339 | 0. (Disable Interrupt), | ||
1340 | ~1. (Trigger by rising and falling edge) | ||
1341 | 2. (Trigger by falling edge) | ||
1342 | 3. (Trigger by rising edge) | ||
1343 | )))|(% style="width:157px" %)OK | ||
1344 | |||
1345 | ((( | ||
1346 | (% style="color:#037691" %)**Downlink Command: 0x06** | ||
1347 | ))) | ||
1348 | |||
1349 | ((( | ||
1350 | Format: Command Code (0x06) followed by 3 bytes. | ||
1351 | ))) | ||
1352 | |||
1353 | ((( | ||
1354 | ((( | ||
1355 | This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06. | ||
1356 | ))) | ||
1357 | ))) | ||
1358 | |||
1359 | * ((( | ||
1360 | Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode | ||
1361 | ))) | ||
1362 | * ((( | ||
1363 | Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge (% title="Click and drag to resize" %)trigger | ||
1364 | ))) | ||
1365 | |||
1366 | == 3.3 Get Firmware Version Info == | ||
1367 | |||
1368 | |||
1369 | Feature: use downlink to get firmware version. | ||
1370 | |||
1371 | (% style="color:#037691" %)**Downlink Command: 0x26** | ||
1372 | |||
1373 | (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:492px" %) | ||
1374 | |(% style="background-color:#4f81bd; color:white; width:191px" %)**Downlink Control Type**|(% style="background-color:#4f81bd; color:white; width:57px" %)**FPort**|(% style="background-color:#4f81bd; color:white; width:91px" %)**Type Code**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Downlink payload size(bytes)** | ||
1375 | |(% style="width:191px" %)Get Firmware Version Info|(% style="width:57px" %)Any|(% style="width:91px" %)26|(% style="width:151px" %)2 | ||
1376 | |||
1377 | * Reply to the confirmation package: 26 01 | ||
1378 | * Reply to non-confirmed packet: 26 00 | ||
1379 | |||
1380 | Device will send an uplink after got this downlink command. With below payload: | ||
1381 | |||
1382 | Configures info payload: | ||
1383 | |||
1384 | (% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %) | ||
1385 | |=(% style="background-color:#4F81BD;color:white" %)((( | ||
1386 | **Size(bytes)** | ||
1387 | )))|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**2**|=(% style="background-color:#4F81BD;color:white" %)**1**|=(% style="background-color:#4F81BD;color:white" %)**4**|=(% style="background-color:#4F81BD;color:white" %)**1** | ||
1388 | |**Value**|Software Type|((( | ||
1389 | Frequency | ||
1390 | Band | ||
1391 | )))|Sub-band|((( | ||
1392 | Firmware | ||
1393 | Version | ||
1394 | )))|Sensor Type|Reserve|((( | ||
1395 | [[Message Type>>||anchor="H2.4.4A0MessageType"]] | ||
1396 | Always 0x02 | ||
1397 | ))) | ||
1398 | |||
1399 | (% style="color:#037691" %)**Software Type**(%%): Always 0x03 for LDDS04 | ||
1400 | |||
1401 | (% style="color:#037691" %)**Frequency Band**: | ||
1402 | |||
1403 | 0x01: EU868 | ||
1404 | |||
1405 | 0x02: US915 | ||
1406 | |||
1407 | 0x03: IN865 | ||
1408 | |||
1409 | 0x04: AU915 | ||
1410 | |||
1411 | 0x05: KZ865 | ||
1412 | |||
1413 | 0x06: RU864 | ||
1414 | |||
1415 | 0x07: AS923 | ||
1416 | |||
1417 | 0x08: AS923-1 | ||
1418 | |||
1419 | 0x09: AS923-2 | ||
1420 | |||
1421 | 0xa0: AS923-3 | ||
1422 | |||
1423 | |||
1424 | (% style="color:#037691" %)**Sub-Band**(%%): value 0x00 ~~ 0x08 | ||
1425 | |||
1426 | (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version | ||
1427 | |||
1428 | (% style="color:#037691" %)**Sensor Type**: | ||
1429 | |||
1430 | 0x01: LSE01 | ||
1431 | |||
1432 | 0x02: LDDS75 | ||
1433 | |||
1434 | 0x03: LDDS20 | ||
1435 | |||
1436 | 0x04: LLMS01 | ||
1437 | |||
1438 | 0x05: LSPH01 | ||
1439 | |||
1440 | 0x06: LSNPK01 | ||
1441 | |||
1442 | 0x07: LLDS12 | ||
1443 | |||
1444 | |||
1445 | = 4. Battery & Power Consumption = | ||
1446 | |||
1447 | |||
1448 | LDDS04 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace. | ||
1449 | |||
1450 | [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] . | ||
1451 | |||
1452 | |||
1453 | = 5. Use AT Command = | ||
1454 | |||
1455 | == 5.1 Access AT Commands == | ||
1456 | |||
1457 | |||
1458 | LDDS04 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LDDS04 for using AT command, as below. | ||
1459 | |||
1460 | [[image:1654940081538-914.png||data-widget="image"]] | ||
1461 | |||
1462 | |||
1463 | **Connection:** | ||
1464 | |||
1465 | (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND** | ||
1466 | |||
1467 | (% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD** | ||
1468 | |||
1469 | (% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD** | ||
1470 | |||
1471 | |||
1472 | ((( | ||
1473 | ((( | ||
1474 | In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LDDS04. | ||
1475 | ))) | ||
1476 | |||
1477 | ((( | ||
1478 | LDDS04 will output system info once power on as below: | ||
1479 | ))) | ||
1480 | ))) | ||
1481 | |||
1482 | |||
1483 | [[image:1654593712276-618.png||data-widget="image"]] | ||
1484 | |||
1485 | Valid AT Command please check [[Configure Device>>||anchor="H3.A0ConfigureLDDS04viaATCommandorLoRaWANDownlink"]]. | ||
1486 | |||
1487 | |||
1488 | = 6. FAQ = | ||
1489 | |||
1490 | == 6.1 How to change the LoRa Frequency Bands/Region == | ||
1491 | |||
1492 | |||
1493 | You can follow the instructions for [[how to upgrade image>>||anchor="H2.9A0200BFirmwareChangeLog"]]. | ||
1494 | When downloading the images, choose the required image file for download. | ||
1495 | |||
1496 | |||
1497 | = 7. Trouble Shooting = | ||
1498 | |||
1499 | == 7.1 AT Command input doesn't work == | ||
1500 | |||
1501 | |||
1502 | In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string. | ||
1503 | |||
1504 | |||
1505 | = 8. Order Info = | ||
1506 | |||
1507 | == 8.1 Main Device LDDS04 == | ||
1508 | |||
1509 | |||
1510 | Part Number **:** (% style="color:blue" %)**LDDS04-XX** | ||
1511 | |||
1512 | (% style="color:blue" %)**XX**(%%)**: **The default frequency band | ||
1513 | |||
1514 | * (% style="color:red" %)**AS923 **(%%)**:** LoRaWAN AS923 band | ||
1515 | * (% style="color:red" %)**AU915 **(%%)**:** LoRaWAN AU915 band | ||
1516 | * (% style="color:red" %)**EU433 **(%%)**:** LoRaWAN EU433 band | ||
1517 | * (% style="color:red" %)**EU868 **(%%)**:** LoRaWAN EU868 band | ||
1518 | * (% style="color:red" %)**KR920 **(%%)**:** LoRaWAN KR920 band | ||
1519 | * (% style="color:red" %)**US915 **(%%)**:** LoRaWAN US915 band | ||
1520 | * (% style="color:red" %)**IN865 **(%%)**:** LoRaWAN IN865 band | ||
1521 | * (% style="color:red" %)**CN470 **(%%)**:** LoRaWAN CN470 (% title="Click and drag to resize" %)band | ||
1522 | |||
1523 | (% style="display:none" %) (%%) | ||
1524 | |||
1525 | |||
1526 | == 8.2 Probe Model == | ||
1527 | |||
1528 | |||
1529 | Detail See [[Probe Option>>||anchor="H1.5A0ProbeOptions"]] Section | ||
1530 | |||
1531 | * A01A-15 | ||
1532 | * A02-15 | ||
1533 | * A13-15 | ||
1534 | * A16-15 | ||
1535 | |||
1536 | = 9. Packing Info = | ||
1537 | |||
1538 | |||
1539 | **Package Includes**: | ||
1540 | |||
1541 | * LDDS04 LoRaWAN 4-Channels Distance Sensor x 1 | ||
1542 | |||
1543 | **Dimension and weight**: | ||
1544 | |||
1545 | * Device Size: cm | ||
1546 | * Device Weight: g | ||
1547 | * Package Size / pcs : cm | ||
1548 | * Weight / pcs : g | ||
1549 | |||
1550 | = 10. Support = | ||
1551 | |||
1552 | |||
1553 | * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule. | ||
1554 | |||
1555 | * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]. |