Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 98.4 >
edited by Xiaoling
on 2022/07/18 10:35
To version < 161.3 >
edited by Xiaoling
on 2023/09/19 18:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,25 +37,26 @@
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 -
51 -
52 52  == 1.3  Specification ==
53 53  
57 +
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
56 56  * RAM: 64KB
57 -* Input Power Range: 1.8v ~~ 3.7v
58 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
59 59  * Frequency Range: 150 MHz ~~ 960 MHz
60 60  * Maximum Power +22 dBm constant RF output
61 61  * High sensitivity: -148 dBm
... ... @@ -67,419 +67,373 @@
67 67  ** Operating: 10 ~~ 95% (Non-Condensing)
68 68  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
69 69  * LoRa Rx current: <9 mA
70 -* I/O Voltage: 3.3v
71 71  
72 72  
75 +== 1.4  Pin Mapping & LED ==
73 73  
74 74  
75 -== 1.4  AT Command ==
78 +[[image:image-20220813183239-3.png||height="526" width="662"]]
76 76  
77 77  
78 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
81 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
79 79  
80 80  
84 +(((
85 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
81 81  
82 -== 1.5  Dimension ==
87 +
88 +)))
83 83  
84 -[[image:image-20220718094750-3.png]]
90 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
85 85  
92 +[[image:image-20220723100027-1.png]]
86 86  
87 87  
95 +Open the serial port tool
88 88  
89 -== 1.6  Pin Mapping ==
97 +[[image:image-20220602161617-8.png]]
90 90  
91 91  
92 -[[image:image-20220523101537-1.png]]
100 +[[image:image-20220602161718-9.png||height="457" width="800"]]
93 93  
94 94  
103 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
95 95  
96 -== 1.7  Land Pattern ==
105 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
97 97  
98 -[[image:image-20220517072821-2.png]]
107 +[[image:image-20220602161935-10.png||height="498" width="800"]]
99 99  
100 100  
110 +(% style="color:blue" %)**3.  See Uplink Command**
101 101  
102 -= 2.  LA66 LoRaWAN Shield =
112 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
103 103  
114 +example: AT+SENDB=01,02,8,05820802581ea0a5
104 104  
105 -== 2.1  Overview ==
116 +[[image:image-20220602162157-11.png||height="497" width="800"]]
106 106  
107 107  
108 -[[image:image-20220715000826-2.png||height="386" width="449"]]
119 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
109 109  
121 +[[image:image-20220817093644-1.png]]
110 110  
111 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
112 112  
113 -(((
114 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
115 -)))
124 +== 1.6  Example: How to join helium ==
116 116  
117 -(((
118 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
119 -)))
120 120  
121 -(((
122 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
123 -)))
127 +(% style="color:blue" %)**1.  Create a new device.**
124 124  
125 -(((
126 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
127 -)))
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
128 128  
129 129  
130 -== 2.2  Features ==
132 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
131 131  
132 -* Arduino Shield base on LA66 LoRaWAN module
133 -* Support LoRaWAN v1.0.4 protocol
134 -* Support peer-to-peer protocol
135 -* TCXO crystal to ensure RF performance on low temperature
136 -* SMA connector
137 -* Available in different frequency LoRaWAN frequency bands.
138 -* World-wide unique OTAA keys.
139 -* AT Command via UART-TTL interface
140 -* Firmware upgradable via UART interface
141 -* Ultra-long RF range
134 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
142 142  
143 -== 2.3  Specification ==
144 144  
145 -* CPU: 32-bit 48 MHz
146 -* Flash: 256KB
147 -* RAM: 64KB
148 -* Input Power Range: 1.8v ~~ 3.7v
149 -* Power Consumption: < 4uA.
150 -* Frequency Range: 150 MHz ~~ 960 MHz
151 -* Maximum Power +22 dBm constant RF output
152 -* High sensitivity: -148 dBm
153 -* Temperature:
154 -** Storage: -55 ~~ +125℃
155 -** Operating: -40 ~~ +85℃
156 -* Humidity:
157 -** Storage: 5 ~~ 95% (Non-Condensing)
158 -** Operating: 10 ~~ 95% (Non-Condensing)
159 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
160 -* LoRa Rx current: <9 mA
161 -* I/O Voltage: 3.3v
137 +(% style="color:blue" %)**3.  Use AT commands.**
162 162  
163 -== 2.4  Pin Mapping & LED ==
139 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
164 164  
165 165  
142 +(% style="color:blue" %)**4.  Use the serial port tool**
166 166  
167 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
144 +[[image:image-20220909151517-2.png||height="543" width="708"]]
168 168  
169 169  
147 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
170 170  
171 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
149 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
172 172  
173 173  
152 +(% style="color:blue" %)**6.  Network successfully.**
174 174  
175 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
176 176  
177 177  
157 +(% style="color:blue" %)**7.  Send uplink using command**
178 178  
179 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
159 +[[image:image-20220912085244-1.png]]
180 180  
161 +[[image:image-20220912085307-2.png]]
181 181  
182 -=== 2.8.1  Items needed for update ===
183 183  
184 -1. LA66 LoRaWAN Shield
185 -1. Arduino
186 -1. USB TO TTL Adapter
164 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
187 187  
188 -[[image:image-20220602100052-2.png||height="385" width="600"]]
189 189  
167 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
191 -=== 2.8.2  Connection ===
192 192  
170 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
194 -[[image:image-20220602101311-3.png||height="276" width="600"]]
172 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
195 195  
196 196  
197 -(((
198 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
199 -)))
175 +(% style="color:red" %)**Preconditions:**
200 200  
201 -(((
202 -(% style="background-color:yellow" %)**GND  <-> GND
203 -TXD  <->  TXD
204 -RXD  <->  RXD**
205 -)))
177 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
206 206  
179 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
207 207  
208 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
209 209  
210 -Connect USB TTL Adapter to PC after connecting the wires
211 211  
183 +(% style="color:blue" %)**Steps for usage:**
212 212  
213 -[[image:image-20220602102240-4.png||height="304" width="600"]]
185 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
214 214  
187 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
215 215  
216 -=== 2.8.3  Upgrade steps ===
189 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
217 217  
218 218  
219 -==== 1.  Switch SW1 to put in ISP position ====
192 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
220 220  
221 221  
222 -[[image:image-20220602102824-5.png||height="306" width="600"]]
195 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
223 223  
224 224  
198 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 225  
226 -==== 2.  Press the RST switch once ====
227 227  
201 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
228 228  
229 -[[image:image-20220602104701-12.png||height="285" width="600"]]
203 +[[image:image-20220723100439-2.png]]
230 230  
231 231  
206 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
232 232  
233 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
208 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
234 234  
210 + (% style="background-color:yellow" %)**apt update**
235 235  
236 -(((
237 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
238 -)))
212 + (% style="background-color:yellow" %)**apt install minicom**
239 239  
214 +Use minicom to connect to the RPI's terminal
240 240  
241 -[[image:image-20220602103227-6.png]]
216 +[[image:image-20220602153146-3.png||height="439" width="500"]]
242 242  
243 243  
244 -[[image:image-20220602103357-7.png]]
219 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
245 245  
221 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
246 246  
223 +[[image:image-20220602154928-5.png||height="436" width="500"]]
247 247  
248 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
249 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
250 250  
226 +(% style="color:blue" %)**4.  Send Uplink message**
251 251  
252 -[[image:image-20220602103844-8.png]]
228 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
253 253  
230 +example: AT+SENDB=01,02,8,05820802581ea0a5
254 254  
232 +[[image:image-20220602160339-6.png||height="517" width="600"]]
255 255  
256 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
257 -(% style="color:blue" %)**3. Select the bin file to burn**
258 258  
259 259  
260 -[[image:image-20220602104144-9.png]]
236 +Check to see if TTN received the message
261 261  
262 262  
263 -[[image:image-20220602104251-10.png]]
239 +[[image:image-20220602160627-7.png||height="369" width="800"]]
264 264  
265 265  
266 -[[image:image-20220602104402-11.png]]
242 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
267 267  
244 +=== 1.9.1  Hardware and Software Connection ===
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
271 -(% style="color:blue" %)**4. Click to start the download**
272 272  
273 -[[image:image-20220602104923-13.png]]
248 +==== (% style="color:blue" %)**Overview：**(%%) ====
274 274  
275 275  
251 +(((
252 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
276 276  
277 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
278 -(% style="color:blue" %)**5. Check update process**
254 +* Send real-time location information of mobile phone to LoRaWAN network.
255 +* Check LoRaWAN network signal strengh.
256 +* Manually send messages to LoRaWAN network.
257 +)))
279 279  
280 280  
281 -[[image:image-20220602104948-14.png]]
282 282  
283 283  
262 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
284 284  
285 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
286 -(% style="color:blue" %)**The following picture shows that the burning is successful**
287 287  
288 -[[image:image-20220602105251-15.png]]
265 +A USB to Type-C adapter is needed to connect to a Mobile phone.
289 289  
267 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
290 290  
269 +[[image:image-20220813174353-2.png||height="360" width="313"]]
291 291  
292 -= 3.  LA66 USB LoRaWAN Adapter =
293 293  
294 294  
295 -== 3.1  Overview ==
273 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
296 296  
297 -[[image:image-20220715001142-3.png||height="145" width="220"]]
298 298  
299 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
276 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
300 300  
301 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
302 302  
303 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
279 +[[image:image-20220813173738-1.png]]
304 304  
305 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
306 306  
307 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
308 308  
283 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
309 309  
310 -== 3.2  Features ==
311 311  
312 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
313 -* Ultra-long RF range
314 -* Support LoRaWAN v1.0.4 protocol
315 -* Support peer-to-peer protocol
316 -* TCXO crystal to ensure RF performance on low temperature
317 -* Spring RF antenna
318 -* Available in different frequency LoRaWAN frequency bands.
319 -* World-wide unique OTAA keys.
320 -* AT Command via UART-TTL interface
321 -* Firmware upgradable via UART interface
322 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
286 +Function and page introduction
323 323  
324 -== 3.3  Specification ==
325 325  
326 -* CPU: 32-bit 48 MHz
327 -* Flash: 256KB
328 -* RAM: 64KB
329 -* Input Power Range: 5v
330 -* Frequency Range: 150 MHz ~~ 960 MHz
331 -* Maximum Power +22 dBm constant RF output
332 -* High sensitivity: -148 dBm
333 -* Temperature:
334 -** Storage: -55 ~~ +125℃
335 -** Operating: -40 ~~ +85℃
336 -* Humidity:
337 -** Storage: 5 ~~ 95% (Non-Condensing)
338 -** Operating: 10 ~~ 95% (Non-Condensing)
339 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
340 -* LoRa Rx current: <9 mA
289 +[[image:image-20220723113448-7.png||height="995" width="450"]]
341 341  
342 -== 3.4  Pin Mapping & LED ==
343 343  
292 +(% style="color:blue" %)**Block Explain:**
344 344  
294 +1.  Display LA66 USB LoRaWAN Module connection status
345 345  
346 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
296 +2.  Check and reconnect
347 347  
298 +3.  Turn send timestamps on or off
348 348  
349 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
300 +4.  Display LoRaWan connection status
350 350  
302 +5.  Check LoRaWan connection status
351 351  
352 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
304 +6.  The RSSI value of the node when the ACK is received
353 353  
306 +7.  Node's Signal Strength Icon
354 354  
355 -[[image:image-20220602171217-1.png||height="538" width="800"]]
308 +8.  Configure Location Uplink Interval
356 356  
310 +9.  AT command input box
357 357  
358 -Open the serial port tool
312 +10.  Send Button:  Send input box info to LA66 USB Adapter
359 359  
360 -[[image:image-20220602161617-8.png]]
314 +11.  Output Log from LA66 USB adapter
361 361  
362 -[[image:image-20220602161718-9.png||height="457" width="800"]]
316 +12.  clear log button
363 363  
318 +13.  exit button
364 364  
365 365  
366 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
367 367  
368 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
322 +LA66 USB LoRaWAN Module not connected
369 369  
370 370  
371 -[[image:image-20220602161935-10.png||height="498" width="800"]]
325 +[[image:image-20220723110520-5.png||height="677" width="508"]]
372 372  
373 373  
374 374  
375 -(% style="color:blue" %)**3. See Uplink Command**
329 +Connect LA66 USB LoRaWAN Module
376 376  
377 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
378 378  
379 -example: AT+SENDB=01,02,8,05820802581ea0a5
332 +[[image:image-20220723110626-6.png||height="681" width="511"]]
380 380  
381 -[[image:image-20220602162157-11.png||height="497" width="800"]]
382 382  
335 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
383 383  
384 384  
385 -(% style="color:blue" %)**4. Check to see if TTN received the message**
338 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
386 386  
387 -[[image:image-20220602162331-12.png||height="420" width="800"]]
388 388  
341 +[[image:image-20220723134549-8.png]]
389 389  
390 390  
391 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
392 392  
345 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
393 393  
394 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
395 395  
348 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
396 396  
397 -(% style="color:red" %)**Preconditions:**
350 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
398 398  
399 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
352 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
400 400  
401 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
354 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 402  
403 403  
357 +Example output in NodeRed is as below:
404 404  
405 -(% style="color:blue" %)**Steps for usage:**
359 +[[image:image-20220723144339-1.png]]
406 406  
407 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
408 408  
409 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
410 410  
411 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
412 412  
365 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
413 413  
367 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
414 414  
415 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
369 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
416 416  
371 +[[image:image-20220723150132-2.png]]
417 417  
418 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
419 419  
420 420  
421 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
375 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
422 422  
423 -[[image:image-20220602171233-2.png||height="538" width="800"]]
424 424  
378 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
425 425  
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
426 426  
427 -(% style="color:blue" %)**2. Install Minicom in RPi.**
382 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
428 428  
429 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
430 430  
431 - (% style="background-color:yellow" %)**apt update**
385 +**2.  Select the COM port corresponding to USB TTL**
432 432  
433 - (% style="background-color:yellow" %)**apt install minicom**
387 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
434 434  
435 435  
436 -Use minicom to connect to the RPI's terminal
390 +**3.  Select the bin file to burn**
437 437  
438 -[[image:image-20220602153146-3.png||height="439" width="500"]]
392 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
439 439  
394 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
440 440  
396 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
441 441  
442 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
443 443  
444 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
399 +**4.  Click to start the download**
445 445  
401 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
446 446  
447 -[[image:image-20220602154928-5.png||height="436" width="500"]]
448 448  
404 +**5.  Check update process**
449 449  
406 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
450 450  
451 -(% style="color:blue" %)**4. Send Uplink message**
452 452  
453 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
409 +**The following picture shows that the burning is successful**
454 454  
455 -example: AT+SENDB=01,02,8,05820802581ea0a5
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
456 456  
457 457  
458 -[[image:image-20220602160339-6.png||height="517" width="600"]]
414 += 2.  FAQ =
459 459  
416 +== 2.1  How to Compile Source Code for LA66? ==
460 460  
461 461  
462 -Check to see if TTN received the message
419 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
463 463  
464 -[[image:image-20220602160627-7.png||height="369" width="800"]]
465 465  
422 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
466 466  
467 467  
468 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
425 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
469 469  
470 470  
428 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
471 471  
472 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
473 473  
431 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
474 474  
475 475  
434 += 3.  Order Info =
476 476  
477 -= 4.  Order Info =
478 478  
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
479 479  
480 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
481 481  
482 -
483 483  (% style="color:blue" %)**XXX**(%%): The default frequency band
484 484  
485 485  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -492,7 +492,39 @@
492 492  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
493 493  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
494 494  
495 -= 5.  Reference =
496 496  
497 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
453 += 4.  Reference =
498 498  
455 +
456 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
458 +
459 +
460 += 5.  FCC Statement =
461 +
462 +
463 +(% style="color:red" %)**FCC Caution:**
464 +
465 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
466 +
467 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
468 +
469 +
470 +(% style="color:red" %)**IMPORTANT NOTE: **
471 +
472 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 +
474 +—Reorient or relocate the receiving antenna.
475 +
476 +—Increase the separation between the equipment and receiver.
477 +
478 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
479 +
480 +—Consult the dealer or an experienced radio/TV technician for help.
481 +
482 +
483 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
484 +
485 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
486 +
487 +
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0