Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 98.3 >
edited by Xiaoling
on 2022/07/18 09:56
To version < 161.2 >
edited by Xiaoling
on 2023/06/10 08:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,25 +37,28 @@
37 37  
38 38  == 1.2  Features ==
39 39  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
40 40  * Support LoRaWAN v1.0.4 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  
51 51  
52 52  == 1.3  Specification ==
53 53  
59 +
54 54  * CPU: 32-bit 48 MHz
55 55  * Flash: 256KB
56 56  * RAM: 64KB
57 -* Input Power Range: 1.8v ~~ 3.7v
58 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
59 59  * Frequency Range: 150 MHz ~~ 960 MHz
60 60  * Maximum Power +22 dBm constant RF output
61 61  * High sensitivity: -148 dBm
... ... @@ -67,418 +67,374 @@
67 67  ** Operating: 10 ~~ 95% (Non-Condensing)
68 68  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
69 69  * LoRa Rx current: <9 mA
70 -* I/O Voltage: 3.3v
71 71  
72 72  
73 73  
78 +== 1.4  Pin Mapping & LED ==
74 74  
75 -== 1.4  AT Command ==
76 76  
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
77 77  
78 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
79 79  
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
80 80  
81 -== 1.5  Dimension ==
82 82  
83 -[[image:image-20220718094750-3.png]]
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
84 84  
90 +
91 +)))
85 85  
93 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
86 86  
95 +[[image:image-20220723100027-1.png]]
87 87  
88 -== 1.6  Pin Mapping ==
89 89  
98 +Open the serial port tool
90 90  
91 -[[image:image-20220523101537-1.png]]
100 +[[image:image-20220602161617-8.png]]
92 92  
93 93  
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
94 94  
95 -== 1.7  Land Pattern ==
96 96  
97 -[[image:image-20220517072821-2.png]]
106 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
98 98  
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
99 99  
110 +[[image:image-20220602161935-10.png||height="498" width="800"]]
100 100  
101 -= 2.  LA66 LoRaWAN Shield =
102 102  
113 +(% style="color:blue" %)**3.  See Uplink Command**
103 103  
104 -== 2.1  Overview ==
115 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
105 105  
117 +example: AT+SENDB=01,02,8,05820802581ea0a5
106 106  
107 -[[image:image-20220715000826-2.png||height="386" width="449"]]
119 +[[image:image-20220602162157-11.png||height="497" width="800"]]
108 108  
109 109  
110 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
122 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
111 111  
112 -(((
113 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
114 -)))
124 +[[image:image-20220817093644-1.png]]
115 115  
116 -(((
117 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
118 -)))
119 119  
120 -(((
121 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
122 -)))
127 +== 1.6  Example: How to join helium ==
123 123  
124 -(((
125 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
126 -)))
127 127  
130 +(% style="color:blue" %)**1.  Create a new device.**
128 128  
129 -== 2.2  Features ==
132 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
130 130  
131 -* Arduino Shield base on LA66 LoRaWAN module
132 -* Support LoRaWAN v1.0.4 protocol
133 -* Support peer-to-peer protocol
134 -* TCXO crystal to ensure RF performance on low temperature
135 -* SMA connector
136 -* Available in different frequency LoRaWAN frequency bands.
137 -* World-wide unique OTAA keys.
138 -* AT Command via UART-TTL interface
139 -* Firmware upgradable via UART interface
140 -* Ultra-long RF range
141 141  
142 -== 2.3  Specification ==
135 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
143 143  
144 -* CPU: 32-bit 48 MHz
145 -* Flash: 256KB
146 -* RAM: 64KB
147 -* Input Power Range: 1.8v ~~ 3.7v
148 -* Power Consumption: < 4uA.
149 -* Frequency Range: 150 MHz ~~ 960 MHz
150 -* Maximum Power +22 dBm constant RF output
151 -* High sensitivity: -148 dBm
152 -* Temperature:
153 -** Storage: -55 ~~ +125℃
154 -** Operating: -40 ~~ +85℃
155 -* Humidity:
156 -** Storage: 5 ~~ 95% (Non-Condensing)
157 -** Operating: 10 ~~ 95% (Non-Condensing)
158 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
159 -* LoRa Rx current: <9 mA
160 -* I/O Voltage: 3.3v
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
161 161  
162 -== 2.4  Pin Mapping & LED ==
163 163  
140 +(% style="color:blue" %)**3.  Use AT commands.**
164 164  
142 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
165 165  
166 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
167 167  
145 +(% style="color:blue" %)**4.  Use the serial port tool**
168 168  
147 +[[image:image-20220909151517-2.png||height="543" width="708"]]
169 169  
170 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
171 171  
150 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
172 172  
152 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
173 173  
174 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
175 175  
155 +(% style="color:blue" %)**6.  Network successfully.**
176 176  
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
177 177  
178 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
179 179  
160 +(% style="color:blue" %)**7.  Send uplink using command**
180 180  
181 -=== 2.8.1  Items needed for update ===
162 +[[image:image-20220912085244-1.png]]
182 182  
183 -1. LA66 LoRaWAN Shield
184 -1. Arduino
185 -1. USB TO TTL Adapter
164 +[[image:image-20220912085307-2.png]]
186 186  
187 -[[image:image-20220602100052-2.png||height="385" width="600"]]
188 188  
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
189 189  
190 -=== 2.8.2  Connection ===
191 191  
170 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
192 192  
193 -[[image:image-20220602101311-3.png||height="276" width="600"]]
194 194  
173 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
195 195  
196 -(((
197 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
198 -)))
175 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
199 199  
200 -(((
201 -(% style="background-color:yellow" %)**GND  <-> GND
202 -TXD  <->  TXD
203 -RXD  <->  RXD**
204 -)))
205 205  
178 +(% style="color:red" %)**Preconditions:**
206 206  
207 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
180 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
208 208  
209 -Connect USB TTL Adapter to PC after connecting the wires
182 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
210 210  
211 211  
212 -[[image:image-20220602102240-4.png||height="304" width="600"]]
213 213  
186 +(% style="color:blue" %)**Steps for usage:**
214 214  
215 -=== 2.8.3  Upgrade steps ===
188 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
216 216  
190 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
217 217  
218 -==== 1.  Switch SW1 to put in ISP position ====
192 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
219 219  
220 220  
221 -[[image:image-20220602102824-5.png||height="306" width="600"]]
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
222 222  
223 223  
198 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
224 224  
225 -==== 2.  Press the RST switch once ====
226 226  
201 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
227 227  
228 -[[image:image-20220602104701-12.png||height="285" width="600"]]
229 229  
204 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
230 230  
206 +[[image:image-20220723100439-2.png]]
231 231  
232 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
233 233  
209 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
234 234  
235 -(((
236 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
237 -)))
211 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
238 238  
213 + (% style="background-color:yellow" %)**apt update**
239 239  
240 -[[image:image-20220602103227-6.png]]
215 + (% style="background-color:yellow" %)**apt install minicom**
241 241  
217 +Use minicom to connect to the RPI's terminal
242 242  
243 -[[image:image-20220602103357-7.png]]
219 +[[image:image-20220602153146-3.png||height="439" width="500"]]
244 244  
245 245  
222 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
246 246  
247 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
248 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
224 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
249 249  
226 +[[image:image-20220602154928-5.png||height="436" width="500"]]
250 250  
251 -[[image:image-20220602103844-8.png]]
252 252  
229 +(% style="color:blue" %)**4.  Send Uplink message**
253 253  
231 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
254 254  
255 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
256 -(% style="color:blue" %)**3. Select the bin file to burn**
233 +example: AT+SENDB=01,02,8,05820802581ea0a5
257 257  
235 +[[image:image-20220602160339-6.png||height="517" width="600"]]
258 258  
259 -[[image:image-20220602104144-9.png]]
260 260  
261 261  
262 -[[image:image-20220602104251-10.png]]
239 +Check to see if TTN received the message
263 263  
264 264  
265 -[[image:image-20220602104402-11.png]]
242 +[[image:image-20220602160627-7.png||height="369" width="800"]]
266 266  
267 267  
245 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
268 268  
269 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
270 -(% style="color:blue" %)**4. Click to start the download**
247 +=== 1.9.1  Hardware and Software Connection ===
271 271  
272 -[[image:image-20220602104923-13.png]]
273 273  
274 274  
251 +==== (% style="color:blue" %)**Overview：**(%%) ====
275 275  
276 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
277 -(% style="color:blue" %)**5. Check update process**
278 278  
254 +(((
255 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
279 279  
280 -[[image:image-20220602104948-14.png]]
257 +* Send real-time location information of mobile phone to LoRaWAN network.
258 +* Check LoRaWAN network signal strengh.
259 +* Manually send messages to LoRaWAN network.
260 +)))
281 281  
282 282  
283 283  
284 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
285 -(% style="color:blue" %)**The following picture shows that the burning is successful**
286 286  
287 -[[image:image-20220602105251-15.png]]
265 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
288 288  
289 289  
268 +A USB to Type-C adapter is needed to connect to a Mobile phone.
290 290  
291 -= 3.  LA66 USB LoRaWAN Adapter =
270 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
292 292  
272 +[[image:image-20220813174353-2.png||height="360" width="313"]]
293 293  
294 -== 3.1  Overview ==
295 295  
296 -[[image:image-20220715001142-3.png||height="145" width="220"]]
297 297  
298 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
276 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
299 299  
300 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
301 301  
302 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
279 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
303 303  
304 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
305 305  
306 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
282 +[[image:image-20220813173738-1.png]]
307 307  
308 308  
309 -== 3.2  Features ==
310 310  
311 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
312 -* Ultra-long RF range
313 -* Support LoRaWAN v1.0.4 protocol
314 -* Support peer-to-peer protocol
315 -* TCXO crystal to ensure RF performance on low temperature
316 -* Spring RF antenna
317 -* Available in different frequency LoRaWAN frequency bands.
318 -* World-wide unique OTAA keys.
319 -* AT Command via UART-TTL interface
320 -* Firmware upgradable via UART interface
321 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
286 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
322 322  
323 -== 3.3  Specification ==
324 324  
325 -* CPU: 32-bit 48 MHz
326 -* Flash: 256KB
327 -* RAM: 64KB
328 -* Input Power Range: 5v
329 -* Frequency Range: 150 MHz ~~ 960 MHz
330 -* Maximum Power +22 dBm constant RF output
331 -* High sensitivity: -148 dBm
332 -* Temperature:
333 -** Storage: -55 ~~ +125℃
334 -** Operating: -40 ~~ +85℃
335 -* Humidity:
336 -** Storage: 5 ~~ 95% (Non-Condensing)
337 -** Operating: 10 ~~ 95% (Non-Condensing)
338 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
339 -* LoRa Rx current: <9 mA
289 +Function and page introduction
340 340  
341 -== 3.4  Pin Mapping & LED ==
342 342  
292 +[[image:image-20220723113448-7.png||height="995" width="450"]]
343 343  
344 344  
345 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
295 +(% style="color:blue" %)**Block Explain:**
346 346  
297 +1.  Display LA66 USB LoRaWAN Module connection status
347 347  
348 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
299 +2.  Check and reconnect
349 349  
301 +3.  Turn send timestamps on or off
350 350  
351 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
303 +4.  Display LoRaWan connection status
352 352  
305 +5.  Check LoRaWan connection status
353 353  
354 -[[image:image-20220602171217-1.png||height="538" width="800"]]
307 +6.  The RSSI value of the node when the ACK is received
355 355  
309 +7.  Node's Signal Strength Icon
356 356  
357 -Open the serial port tool
311 +8.  Configure Location Uplink Interval
358 358  
359 -[[image:image-20220602161617-8.png]]
313 +9.  AT command input box
360 360  
361 -[[image:image-20220602161718-9.png||height="457" width="800"]]
315 +10.  Send Button:  Send input box info to LA66 USB Adapter
362 362  
317 +11.  Output Log from LA66 USB adapter
363 363  
319 +12.  clear log button
364 364  
365 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
321 +13.  exit button
366 366  
367 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
368 368  
369 369  
370 -[[image:image-20220602161935-10.png||height="498" width="800"]]
325 +LA66 USB LoRaWAN Module not connected
371 371  
372 372  
328 +[[image:image-20220723110520-5.png||height="677" width="508"]]
373 373  
374 -(% style="color:blue" %)**3. See Uplink Command**
375 375  
376 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
377 377  
378 -example: AT+SENDB=01,02,8,05820802581ea0a5
332 +Connect LA66 USB LoRaWAN Module
379 379  
380 -[[image:image-20220602162157-11.png||height="497" width="800"]]
381 381  
335 +[[image:image-20220723110626-6.png||height="681" width="511"]]
382 382  
383 383  
384 -(% style="color:blue" %)**4. Check to see if TTN received the message**
338 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
385 385  
386 -[[image:image-20220602162331-12.png||height="420" width="800"]]
387 387  
341 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
388 388  
389 389  
390 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
344 +[[image:image-20220723134549-8.png]]
391 391  
392 392  
393 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
394 394  
348 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
395 395  
396 -(% style="color:red" %)**Preconditions:**
397 397  
398 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
351 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
399 399  
400 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
353 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
401 401  
355 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
402 402  
357 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
403 403  
404 -(% style="color:blue" %)**Steps for usage:**
405 405  
406 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
360 +Example output in NodeRed is as below:
407 407  
408 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 +[[image:image-20220723144339-1.png]]
409 409  
410 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
411 411  
365 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
412 412  
413 413  
414 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
368 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
415 415  
370 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
416 416  
417 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
372 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
418 418  
374 +[[image:image-20220723150132-2.png]]
419 419  
420 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
421 421  
422 -[[image:image-20220602171233-2.png||height="538" width="800"]]
423 423  
378 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
424 424  
425 425  
426 -(% style="color:blue" %)**2. Install Minicom in RPi.**
381 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
427 427  
428 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
383 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
429 429  
430 - (% style="background-color:yellow" %)**apt update**
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
431 431  
432 - (% style="background-color:yellow" %)**apt install minicom**
433 433  
388 +**2.  Select the COM port corresponding to USB TTL**
434 434  
435 -Use minicom to connect to the RPI's terminal
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
436 436  
437 -[[image:image-20220602153146-3.png||height="439" width="500"]]
438 438  
393 +**3.  Select the bin file to burn**
439 439  
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
440 440  
441 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
397 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
442 442  
443 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
399 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
444 444  
445 445  
446 -[[image:image-20220602154928-5.png||height="436" width="500"]]
402 +**4.  Click to start the download**
447 447  
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
448 448  
449 449  
450 -(% style="color:blue" %)**4. Send Uplink message**
407 +**5.  Check update process**
451 451  
452 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
453 453  
454 -example: AT+SENDB=01,02,8,05820802581ea0a5
455 455  
412 +**The following picture shows that the burning is successful**
456 456  
457 -[[image:image-20220602160339-6.png||height="517" width="600"]]
414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
458 458  
459 459  
417 += 2.  FAQ =
460 460  
461 -Check to see if TTN received the message
419 +== 2.1  How to Compile Source Code for LA66? ==
462 462  
463 -[[image:image-20220602160627-7.png||height="369" width="800"]]
464 464  
422 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
465 465  
466 466  
467 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
425 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
468 468  
469 469  
428 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
470 470  
471 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
472 472  
431 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
473 473  
474 474  
434 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
475 475  
476 -= 4.  Order Info =
477 477  
437 += 3.  Order Info =
478 478  
479 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
480 480  
440 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
481 481  
442 +
482 482  (% style="color:blue" %)**XXX**(%%): The default frequency band
483 483  
484 484  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -491,8 +491,41 @@
491 491  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
492 492  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
493 493  
494 -= 5.  Reference =
495 495  
496 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
497 497  
457 += 4.  Reference =
458 +
459 +
460 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
461 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
462 +
463 +
464 +
465 += 5.  FCC Statement =
466 +
467 +
468 +(% style="color:red" %)**FCC Caution:**
469 +
470 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 +
472 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 +
474 +
475 +(% style="color:red" %)**IMPORTANT NOTE: **
476 +
477 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 +
479 +—Reorient or relocate the receiving antenna.
480 +
481 +—Increase the separation between the equipment and receiver.
482 +
483 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 +
485 +—Consult the dealer or an experienced radio/TV technician for help.
486 +
487 +
488 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 +
490 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
491 +
498 498  
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0