Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 95.1 >
edited by Xiaoling
on 2022/07/18 09:41
To version < 161.2 >
edited by Xiaoling
on 2023/06/10 08:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,24 +37,28 @@
37 37  
38 38  == 1.2  Features ==
39 39  
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
40 40  * Support LoRaWAN v1.0.4 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  
56 +
51 51  == 1.3  Specification ==
52 52  
59 +
53 53  * CPU: 32-bit 48 MHz
54 54  * Flash: 256KB
55 55  * RAM: 64KB
56 -* Input Power Range: 1.8v ~~ 3.7v
57 -* Power Consumption: < 4uA.
63 +* Input Power Range: 5v
58 58  * Frequency Range: 150 MHz ~~ 960 MHz
59 59  * Maximum Power +22 dBm constant RF output
60 60  * High sensitivity: -148 dBm
... ... @@ -66,418 +66,374 @@
66 66  ** Operating: 10 ~~ 95% (Non-Condensing)
67 67  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
68 68  * LoRa Rx current: <9 mA
69 -* I/O Voltage: 3.3v
70 70  
71 71  
72 -== 1.4  AT Command ==
73 73  
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
78 +== 1.4  Pin Mapping & LED ==
75 75  
76 76  
77 -== 1.5  Dimension ==
81 +[[image:image-20220813183239-3.png||height="526" width="662"]]
78 78  
79 -[[image:image-20220517072526-1.png]]
80 80  
84 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
81 81  
82 82  
83 -== 1.6  Pin Mapping ==
87 +(((
88 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
84 84  
90 +
91 +)))
85 85  
86 -[[image:image-20220523101537-1.png]]
93 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
87 87  
95 +[[image:image-20220723100027-1.png]]
88 88  
89 89  
90 -== 1.7  Land Pattern ==
98 +Open the serial port tool
91 91  
92 -[[image:image-20220517072821-2.png]]
100 +[[image:image-20220602161617-8.png]]
93 93  
94 94  
103 +[[image:image-20220602161718-9.png||height="457" width="800"]]
95 95  
96 -= 2.  LA66 LoRaWAN Shield =
97 97  
106 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
98 98  
99 -== 2.1  Overview ==
108 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
100 100  
110 +[[image:image-20220602161935-10.png||height="498" width="800"]]
101 101  
102 -[[image:image-20220715000826-2.png||height="386" width="449"]]
103 103  
113 +(% style="color:blue" %)**3.  See Uplink Command**
104 104  
105 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
115 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
106 106  
107 -(((
108 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
109 -)))
117 +example: AT+SENDB=01,02,8,05820802581ea0a5
110 110  
111 -(((
112 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
113 -)))
119 +[[image:image-20220602162157-11.png||height="497" width="800"]]
114 114  
115 -(((
116 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
117 -)))
118 118  
119 -(((
120 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
121 -)))
122 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
122 122  
124 +[[image:image-20220817093644-1.png]]
123 123  
124 -== 2.2  Features ==
125 125  
126 -* Arduino Shield base on LA66 LoRaWAN module
127 -* Support LoRaWAN v1.0.4 protocol
128 -* Support peer-to-peer protocol
129 -* TCXO crystal to ensure RF performance on low temperature
130 -* SMA connector
131 -* Available in different frequency LoRaWAN frequency bands.
132 -* World-wide unique OTAA keys.
133 -* AT Command via UART-TTL interface
134 -* Firmware upgradable via UART interface
135 -* Ultra-long RF range
127 +== 1.6  Example: How to join helium ==
136 136  
137 137  
138 -== 2.3  Specification ==
130 +(% style="color:blue" %)**1.  Create a new device.**
139 139  
140 -* CPU: 32-bit 48 MHz
141 -* Flash: 256KB
142 -* RAM: 64KB
143 -* Input Power Range: 1.8v ~~ 3.7v
144 -* Power Consumption: < 4uA.
145 -* Frequency Range: 150 MHz ~~ 960 MHz
146 -* Maximum Power +22 dBm constant RF output
147 -* High sensitivity: -148 dBm
148 -* Temperature:
149 -** Storage: -55 ~~ +125℃
150 -** Operating: -40 ~~ +85℃
151 -* Humidity:
152 -** Storage: 5 ~~ 95% (Non-Condensing)
153 -** Operating: 10 ~~ 95% (Non-Condensing)
154 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
155 -* LoRa Rx current: <9 mA
156 -* I/O Voltage: 3.3v
132 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
157 157  
158 158  
159 -== 2.4  Pin Mapping & LED ==
135 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
160 160  
137 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
161 161  
162 162  
163 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
140 +(% style="color:blue" %)**3.  Use AT commands.**
164 164  
142 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
165 165  
166 166  
167 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
145 +(% style="color:blue" %)**4.  Use the serial port tool**
168 168  
147 +[[image:image-20220909151517-2.png||height="543" width="708"]]
169 169  
170 170  
171 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
150 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
172 172  
152 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
173 173  
174 174  
175 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
155 +(% style="color:blue" %)**6.  Network successfully.**
176 176  
157 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
177 177  
178 -=== 2.8.1  Items needed for update ===
179 179  
180 -1. LA66 LoRaWAN Shield
181 -1. Arduino
182 -1. USB TO TTL Adapter
160 +(% style="color:blue" %)**7.  Send uplink using command**
183 183  
184 -[[image:image-20220602100052-2.png||height="385" width="600"]]
162 +[[image:image-20220912085244-1.png]]
185 185  
164 +[[image:image-20220912085307-2.png]]
186 186  
187 -=== 2.8.2  Connection ===
188 188  
167 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
189 189  
190 -[[image:image-20220602101311-3.png||height="276" width="600"]]
191 191  
170 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
192 192  
193 -(((
194 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
195 -)))
196 196  
197 -(((
198 -(% style="background-color:yellow" %)**GND  <-> GND
199 -TXD  <->  TXD
200 -RXD  <->  RXD**
201 -)))
173 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
202 202  
175 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
203 203  
204 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
205 205  
206 -Connect USB TTL Adapter to PC after connecting the wires
178 +(% style="color:red" %)**Preconditions:**
207 207  
180 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
208 208  
209 -[[image:image-20220602102240-4.png||height="304" width="600"]]
182 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
210 210  
211 211  
212 -=== 2.8.3  Upgrade steps ===
213 213  
186 +(% style="color:blue" %)**Steps for usage:**
214 214  
215 -==== 1.  Switch SW1 to put in ISP position ====
188 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
216 216  
190 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
217 217  
218 -[[image:image-20220602102824-5.png||height="306" width="600"]]
192 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
219 219  
220 220  
195 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
221 221  
222 -==== 2.  Press the RST switch once ====
223 223  
198 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
224 224  
225 -[[image:image-20220602104701-12.png||height="285" width="600"]]
226 226  
201 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
227 227  
228 228  
229 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
204 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
230 230  
206 +[[image:image-20220723100439-2.png]]
231 231  
232 -(((
233 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
234 -)))
235 235  
209 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
236 236  
237 -[[image:image-20220602103227-6.png]]
211 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
238 238  
213 + (% style="background-color:yellow" %)**apt update**
239 239  
240 -[[image:image-20220602103357-7.png]]
215 + (% style="background-color:yellow" %)**apt install minicom**
241 241  
217 +Use minicom to connect to the RPI's terminal
242 242  
219 +[[image:image-20220602153146-3.png||height="439" width="500"]]
243 243  
244 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
245 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
246 246  
222 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
247 247  
248 -[[image:image-20220602103844-8.png]]
224 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
249 249  
226 +[[image:image-20220602154928-5.png||height="436" width="500"]]
250 250  
251 251  
252 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
253 -(% style="color:blue" %)**3. Select the bin file to burn**
229 +(% style="color:blue" %)**4.  Send Uplink message**
254 254  
231 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
255 255  
256 -[[image:image-20220602104144-9.png]]
233 +example: AT+SENDB=01,02,8,05820802581ea0a5
257 257  
235 +[[image:image-20220602160339-6.png||height="517" width="600"]]
258 258  
259 -[[image:image-20220602104251-10.png]]
260 260  
261 261  
262 -[[image:image-20220602104402-11.png]]
239 +Check to see if TTN received the message
263 263  
264 264  
242 +[[image:image-20220602160627-7.png||height="369" width="800"]]
265 265  
266 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
267 -(% style="color:blue" %)**4. Click to start the download**
268 268  
269 -[[image:image-20220602104923-13.png]]
245 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
270 270  
247 +=== 1.9.1  Hardware and Software Connection ===
271 271  
272 272  
273 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
274 -(% style="color:blue" %)**5. Check update process**
275 275  
251 +==== (% style="color:blue" %)**Overview：**(%%) ====
276 276  
277 -[[image:image-20220602104948-14.png]]
278 278  
254 +(((
255 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
279 279  
257 +* Send real-time location information of mobile phone to LoRaWAN network.
258 +* Check LoRaWAN network signal strengh.
259 +* Manually send messages to LoRaWAN network.
260 +)))
280 280  
281 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
282 -(% style="color:blue" %)**The following picture shows that the burning is successful**
283 283  
284 -[[image:image-20220602105251-15.png]]
285 285  
286 286  
265 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
287 287  
288 -= 3.  LA66 USB LoRaWAN Adapter =
289 289  
268 +A USB to Type-C adapter is needed to connect to a Mobile phone.
290 290  
291 -== 3.1  Overview ==
270 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
292 292  
293 -[[image:image-20220715001142-3.png||height="145" width="220"]]
272 +[[image:image-20220813174353-2.png||height="360" width="313"]]
294 294  
295 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
296 296  
297 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
298 298  
299 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
276 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
300 300  
301 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
302 302  
303 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
279 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
304 304  
305 305  
306 -== 3.2  Features ==
282 +[[image:image-20220813173738-1.png]]
307 307  
308 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
309 -* Ultra-long RF range
310 -* Support LoRaWAN v1.0.4 protocol
311 -* Support peer-to-peer protocol
312 -* TCXO crystal to ensure RF performance on low temperature
313 -* Spring RF antenna
314 -* Available in different frequency LoRaWAN frequency bands.
315 -* World-wide unique OTAA keys.
316 -* AT Command via UART-TTL interface
317 -* Firmware upgradable via UART interface
318 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
319 319  
320 320  
321 -== 3.3  Specification ==
286 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
322 322  
323 -* CPU: 32-bit 48 MHz
324 -* Flash: 256KB
325 -* RAM: 64KB
326 -* Input Power Range: 5v
327 -* Frequency Range: 150 MHz ~~ 960 MHz
328 -* Maximum Power +22 dBm constant RF output
329 -* High sensitivity: -148 dBm
330 -* Temperature:
331 -** Storage: -55 ~~ +125℃
332 -** Operating: -40 ~~ +85℃
333 -* Humidity:
334 -** Storage: 5 ~~ 95% (Non-Condensing)
335 -** Operating: 10 ~~ 95% (Non-Condensing)
336 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
337 -* LoRa Rx current: <9 mA
338 338  
289 +Function and page introduction
339 339  
340 -== 3.4  Pin Mapping & LED ==
341 341  
292 +[[image:image-20220723113448-7.png||height="995" width="450"]]
342 342  
343 343  
344 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
295 +(% style="color:blue" %)**Block Explain:**
345 345  
297 +1.  Display LA66 USB LoRaWAN Module connection status
346 346  
347 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
299 +2.  Check and reconnect
348 348  
301 +3.  Turn send timestamps on or off
349 349  
350 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
303 +4.  Display LoRaWan connection status
351 351  
305 +5.  Check LoRaWan connection status
352 352  
353 -[[image:image-20220602171217-1.png||height="538" width="800"]]
307 +6.  The RSSI value of the node when the ACK is received
354 354  
309 +7.  Node's Signal Strength Icon
355 355  
356 -Open the serial port tool
311 +8.  Configure Location Uplink Interval
357 357  
358 -[[image:image-20220602161617-8.png]]
313 +9.  AT command input box
359 359  
360 -[[image:image-20220602161718-9.png||height="457" width="800"]]
315 +10.  Send Button:  Send input box info to LA66 USB Adapter
361 361  
317 +11.  Output Log from LA66 USB adapter
362 362  
319 +12.  clear log button
363 363  
364 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
321 +13.  exit button
365 365  
366 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
367 367  
368 368  
369 -[[image:image-20220602161935-10.png||height="498" width="800"]]
325 +LA66 USB LoRaWAN Module not connected
370 370  
371 371  
328 +[[image:image-20220723110520-5.png||height="677" width="508"]]
372 372  
373 -(% style="color:blue" %)**3. See Uplink Command**
374 374  
375 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
376 376  
377 -example: AT+SENDB=01,02,8,05820802581ea0a5
332 +Connect LA66 USB LoRaWAN Module
378 378  
379 -[[image:image-20220602162157-11.png||height="497" width="800"]]
380 380  
335 +[[image:image-20220723110626-6.png||height="681" width="511"]]
381 381  
382 382  
383 -(% style="color:blue" %)**4. Check to see if TTN received the message**
338 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
384 384  
385 -[[image:image-20220602162331-12.png||height="420" width="800"]]
386 386  
341 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
387 387  
388 388  
389 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
344 +[[image:image-20220723134549-8.png]]
390 390  
391 391  
392 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
393 393  
348 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
394 394  
395 -(% style="color:red" %)**Preconditions:**
396 396  
397 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
351 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
398 398  
399 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
353 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
400 400  
355 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
401 401  
357 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
402 402  
403 -(% style="color:blue" %)**Steps for usage:**
404 404  
405 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
360 +Example output in NodeRed is as below:
406 406  
407 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 +[[image:image-20220723144339-1.png]]
408 408  
409 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
410 410  
365 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
411 411  
412 412  
413 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
368 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
414 414  
370 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
415 415  
416 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
372 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
417 417  
374 +[[image:image-20220723150132-2.png]]
418 418  
419 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
420 420  
421 -[[image:image-20220602171233-2.png||height="538" width="800"]]
422 422  
378 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
423 423  
424 424  
425 -(% style="color:blue" %)**2. Install Minicom in RPi.**
381 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
426 426  
427 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
383 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
428 428  
429 - (% style="background-color:yellow" %)**apt update**
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
430 430  
431 - (% style="background-color:yellow" %)**apt install minicom**
432 432  
388 +**2.  Select the COM port corresponding to USB TTL**
433 433  
434 -Use minicom to connect to the RPI's terminal
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
435 435  
436 -[[image:image-20220602153146-3.png||height="439" width="500"]]
437 437  
393 +**3.  Select the bin file to burn**
438 438  
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
439 439  
440 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
397 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
441 441  
442 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
399 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
443 443  
444 444  
445 -[[image:image-20220602154928-5.png||height="436" width="500"]]
402 +**4.  Click to start the download**
446 446  
404 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
447 447  
448 448  
449 -(% style="color:blue" %)**4. Send Uplink message**
407 +**5.  Check update process**
450 450  
451 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
409 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
452 452  
453 -example: AT+SENDB=01,02,8,05820802581ea0a5
454 454  
412 +**The following picture shows that the burning is successful**
455 455  
456 -[[image:image-20220602160339-6.png||height="517" width="600"]]
414 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
457 457  
458 458  
417 += 2.  FAQ =
459 459  
460 -Check to see if TTN received the message
419 +== 2.1  How to Compile Source Code for LA66? ==
461 461  
462 -[[image:image-20220602160627-7.png||height="369" width="800"]]
463 463  
422 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
464 464  
465 465  
466 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
425 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
467 467  
468 468  
428 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
469 469  
470 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
471 471  
431 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
472 472  
473 473  
434 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
474 474  
475 -= 4.  Order Info =
476 476  
437 += 3.  Order Info =
477 477  
478 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
479 479  
440 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
480 480  
442 +
481 481  (% style="color:blue" %)**XXX**(%%): The default frequency band
482 482  
483 483  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -490,8 +490,41 @@
490 490  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
491 491  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
492 492  
493 -= 5.  Reference =
494 494  
495 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
496 496  
457 += 4.  Reference =
458 +
459 +
460 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
461 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
462 +
463 +
464 +
465 += 5.  FCC Statement =
466 +
467 +
468 +(% style="color:red" %)**FCC Caution:**
469 +
470 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
471 +
472 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
473 +
474 +
475 +(% style="color:red" %)**IMPORTANT NOTE: **
476 +
477 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
478 +
479 +—Reorient or relocate the receiving antenna.
480 +
481 +—Increase the separation between the equipment and receiver.
482 +
483 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
484 +
485 +—Consult the dealer or an experienced radio/TV technician for help.
486 +
487 +
488 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
489 +
490 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
491 +
497 497  
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0