Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 93.3 >
edited by Xiaoling
on 2022/07/18 09:29
To version < 157.2 >
edited by Xiaoling
on 2022/09/12 08:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Content
... ... @@ -6,20 +6,23 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
14 +== 1.1  Overview ==
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
20 +(((
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -35,26 +35,32 @@
35 35  )))
36 36  
37 37  
41 +
38 38  == 1.2  Features ==
39 39  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
40 40  * Support LoRaWAN v1.0.4 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  
58 +
59 +
51 51  == 1.3  Specification ==
52 52  
62 +
53 53  * CPU: 32-bit 48 MHz
54 54  * Flash: 256KB
55 55  * RAM: 64KB
56 -* Input Power Range: 1.8v ~~ 3.7v
57 -* Power Consumption: < 4uA.
66 +* Input Power Range: 5v
58 58  * Frequency Range: 150 MHz ~~ 960 MHz
59 59  * Maximum Power +22 dBm constant RF output
60 60  * High sensitivity: -148 dBm
... ... @@ -66,418 +66,368 @@
66 66  ** Operating: 10 ~~ 95% (Non-Condensing)
67 67  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
68 68  * LoRa Rx current: <9 mA
69 -* I/O Voltage: 3.3v
70 70  
71 71  
72 -== 1.4  AT Command ==
73 73  
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 75  
82 +== 1.4  Pin Mapping & LED ==
76 76  
77 -== 1.5  Dimension ==
78 78  
79 -[[image:image-20220517072526-1.png]]
85 +[[image:image-20220813183239-3.png||height="526" width="662"]]
80 80  
81 81  
82 82  
83 -== 1.6  Pin Mapping ==
89 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
84 84  
85 85  
86 -[[image:image-20220523101537-1.png]]
92 +(((
93 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
94 +)))
87 87  
88 88  
97 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
89 89  
90 -== 1.7  Land Pattern ==
91 91  
92 -[[image:image-20220517072821-2.png]]
100 +[[image:image-20220723100027-1.png]]
93 93  
94 94  
103 +Open the serial port tool
95 95  
96 -= 2.  LA66 LoRaWAN Shield =
105 +[[image:image-20220602161617-8.png]]
97 97  
98 98  
99 -== 2.1  Overview ==
108 +[[image:image-20220602161718-9.png||height="457" width="800"]]
100 100  
101 101  
102 -[[image:image-20220715000826-2.png||height="386" width="449"]]
103 103  
112 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
104 104  
105 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
106 106  
107 -(((
108 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
109 -)))
115 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
110 110  
111 -(((
112 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
113 -)))
114 114  
115 -(((
116 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
117 -)))
118 +[[image:image-20220602161935-10.png||height="498" width="800"]]
118 118  
119 -(((
120 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
121 -)))
122 122  
123 123  
124 -== 2.2  Features ==
122 +(% style="color:blue" %)**3.  See Uplink Command**
125 125  
126 -* Arduino Shield base on LA66 LoRaWAN module
127 -* Support LoRaWAN v1.0.4 protocol
128 -* Support peer-to-peer protocol
129 -* TCXO crystal to ensure RF performance on low temperature
130 -* SMA connector
131 -* Available in different frequency LoRaWAN frequency bands.
132 -* World-wide unique OTAA keys.
133 -* AT Command via UART-TTL interface
134 -* Firmware upgradable via UART interface
135 -* Ultra-long RF range
136 136  
125 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
137 137  
138 -== 2.3  Specification ==
127 +example: AT+SENDB=01,02,8,05820802581ea0a5
139 139  
140 -* CPU: 32-bit 48 MHz
141 -* Flash: 256KB
142 -* RAM: 64KB
143 -* Input Power Range: 1.8v ~~ 3.7v
144 -* Power Consumption: < 4uA.
145 -* Frequency Range: 150 MHz ~~ 960 MHz
146 -* Maximum Power +22 dBm constant RF output
147 -* High sensitivity: -148 dBm
148 -* Temperature:
149 -** Storage: -55 ~~ +125℃
150 -** Operating: -40 ~~ +85℃
151 -* Humidity:
152 -** Storage: 5 ~~ 95% (Non-Condensing)
153 -** Operating: 10 ~~ 95% (Non-Condensing)
154 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
155 -* LoRa Rx current: <9 mA
156 -* I/O Voltage: 3.3v
129 +[[image:image-20220602162157-11.png||height="497" width="800"]]
157 157  
158 158  
159 -== 2.4  Pin Mapping & LED ==
160 160  
133 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
161 161  
162 162  
163 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
136 +[[image:image-20220817093644-1.png]]
164 164  
165 165  
166 166  
167 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
140 +== 1.6  Example: How to join helium ==
168 168  
169 169  
170 170  
171 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
144 +(% style="color:blue" %)**1.  Create a new device.**
172 172  
173 173  
147 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
174 174  
175 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
176 176  
177 177  
178 -=== 2.8.1  Items needed for update ===
151 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
179 179  
180 -1. LA66 LoRaWAN Shield
181 -1. Arduino
182 -1. USB TO TTL Adapter
183 183  
184 -[[image:image-20220602100052-2.png||height="385" width="600"]]
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
185 185  
186 186  
187 -=== 2.8.2  Connection ===
188 188  
158 +(% style="color:blue" %)**3.  Use AT commands.**
189 189  
190 -[[image:image-20220602101311-3.png||height="276" width="600"]]
191 191  
161 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
192 192  
193 -(((
194 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
195 -)))
196 196  
197 -(((
198 -(% style="background-color:yellow" %)**GND  <-> GND
199 -TXD  <->  TXD
200 -RXD  <->  RXD**
201 -)))
202 202  
165 +(% style="color:blue" %)**4.  Use the serial port tool**
203 203  
204 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
205 205  
206 -Connect USB TTL Adapter to PC after connecting the wires
168 +[[image:image-20220909151517-2.png||height="543" width="708"]]
207 207  
208 208  
209 -[[image:image-20220602102240-4.png||height="304" width="600"]]
210 210  
172 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
211 211  
212 -=== 2.8.3  Upgrade steps ===
213 213  
175 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
214 214  
215 -==== 1.  Switch SW1 to put in ISP position ====
216 216  
217 217  
218 -[[image:image-20220602102824-5.png||height="306" width="600"]]
179 +(% style="color:blue" %)**6.  Network successfully.**
219 219  
220 220  
182 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
221 221  
222 -==== 2.  Press the RST switch once ====
223 223  
224 224  
225 -[[image:image-20220602104701-12.png||height="285" width="600"]]
186 +(% style="color:blue" %)**7.  Send uplink using command**
226 226  
227 227  
189 +[[image:image-20220912085244-1.png]]
228 228  
229 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
230 230  
192 +[[image:image-20220912085307-2.png]]
231 231  
232 -(((
233 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
234 -)))
235 235  
236 236  
237 -[[image:image-20220602103227-6.png]]
196 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
238 238  
239 239  
240 -[[image:image-20220602103357-7.png]]
241 241  
200 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
242 242  
243 243  
244 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
245 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
203 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
246 246  
205 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
247 247  
248 -[[image:image-20220602103844-8.png]]
249 249  
208 +(% style="color:red" %)**Preconditions:**
250 250  
210 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
251 251  
252 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
253 -(% style="color:blue" %)**3. Select the bin file to burn**
212 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
254 254  
255 255  
256 -[[image:image-20220602104144-9.png]]
257 257  
216 +(% style="color:blue" %)**Steps for usage:**
258 258  
259 -[[image:image-20220602104251-10.png]]
218 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
260 260  
220 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
261 261  
262 -[[image:image-20220602104402-11.png]]
263 263  
223 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
264 264  
265 265  
266 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
267 -(% style="color:blue" %)**4. Click to start the download**
268 268  
269 -[[image:image-20220602104923-13.png]]
227 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
270 270  
271 271  
230 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
272 272  
273 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
274 -(% style="color:blue" %)**5. Check update process**
275 275  
233 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
276 276  
277 -[[image:image-20220602104948-14.png]]
278 278  
236 +[[image:image-20220723100439-2.png]]
279 279  
280 280  
281 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
282 -(% style="color:blue" %)**The following picture shows that the burning is successful**
283 283  
284 -[[image:image-20220602105251-15.png]]
240 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
285 285  
286 286  
243 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
287 287  
288 -= 3.  LA66 USB LoRaWAN Adapter =
245 + (% style="background-color:yellow" %)**apt update**
289 289  
247 + (% style="background-color:yellow" %)**apt install minicom**
290 290  
291 -== 3.1  Overview ==
292 292  
293 -[[image:image-20220715001142-3.png||height="145" width="220"]]
250 +Use minicom to connect to the RPI's terminal
294 294  
295 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
252 +[[image:image-20220602153146-3.png||height="439" width="500"]]
296 296  
297 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
298 298  
299 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
300 300  
301 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
256 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
302 302  
303 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
304 304  
259 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
305 305  
306 -== 3.2  Features ==
307 307  
308 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
309 -* Ultra-long RF range
310 -* Support LoRaWAN v1.0.4 protocol
311 -* Support peer-to-peer protocol
312 -* TCXO crystal to ensure RF performance on low temperature
313 -* Spring RF antenna
314 -* Available in different frequency LoRaWAN frequency bands.
315 -* World-wide unique OTAA keys.
316 -* AT Command via UART-TTL interface
317 -* Firmware upgradable via UART interface
318 -* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
262 +[[image:image-20220602154928-5.png||height="436" width="500"]]
319 319  
320 320  
321 -== 3.3  Specification ==
322 322  
323 -* CPU: 32-bit 48 MHz
324 -* Flash: 256KB
325 -* RAM: 64KB
326 -* Input Power Range: 5v
327 -* Frequency Range: 150 MHz ~~ 960 MHz
328 -* Maximum Power +22 dBm constant RF output
329 -* High sensitivity: -148 dBm
330 -* Temperature:
331 -** Storage: -55 ~~ +125℃
332 -** Operating: -40 ~~ +85℃
333 -* Humidity:
334 -** Storage: 5 ~~ 95% (Non-Condensing)
335 -** Operating: 10 ~~ 95% (Non-Condensing)
336 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
337 -* LoRa Rx current: <9 mA
266 +(% style="color:blue" %)**4.  Send Uplink message**
338 338  
339 339  
340 -== 3.4  Pin Mapping & LED ==
269 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
341 341  
271 +example: AT+SENDB=01,02,8,05820802581ea0a5
342 342  
343 343  
344 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
274 +[[image:image-20220602160339-6.png||height="517" width="600"]]
345 345  
346 346  
347 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
348 348  
278 +Check to see if TTN received the message
349 349  
350 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
351 351  
281 +[[image:image-20220602160627-7.png||height="369" width="800"]]
352 352  
353 -[[image:image-20220602171217-1.png||height="538" width="800"]]
354 354  
355 355  
356 -Open the serial port tool
285 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
357 357  
358 -[[image:image-20220602161617-8.png]]
359 359  
360 -[[image:image-20220602161718-9.png||height="457" width="800"]]
288 +=== 1.9.1  Hardware and Software Connection ===
361 361  
362 362  
363 363  
364 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
292 +==== (% style="color:blue" %)**Overview：**(%%) ====
365 365  
366 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
367 367  
295 +(((
296 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
368 368  
369 -[[image:image-20220602161935-10.png||height="498" width="800"]]
298 +* Send real-time location information of mobile phone to LoRaWAN network.
299 +* Check LoRaWAN network signal strengh.
300 +* Manually send messages to LoRaWAN network.
301 +)))
370 370  
371 371  
372 372  
373 -(% style="color:blue" %)**3. See Uplink Command**
374 374  
375 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
376 376  
377 -example: AT+SENDB=01,02,8,05820802581ea0a5
307 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
378 378  
379 -[[image:image-20220602162157-11.png||height="497" width="800"]]
380 380  
310 +A USB to Type-C adapter is needed to connect to a Mobile phone.
381 381  
312 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
382 382  
383 -(% style="color:blue" %)**4. Check to see if TTN received the message**
314 +[[image:image-20220813174353-2.png||height="360" width="313"]]
384 384  
385 -[[image:image-20220602162331-12.png||height="420" width="800"]]
386 386  
387 387  
388 388  
389 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
319 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
390 390  
391 391  
392 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
322 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
393 393  
394 394  
395 -(% style="color:red" %)**Preconditions:**
325 +[[image:image-20220813173738-1.png]]
396 396  
397 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
398 398  
399 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
400 400  
401 401  
330 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
402 402  
403 -(% style="color:blue" %)**Steps for usage:**
404 404  
405 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
333 +Function and page introduction
406 406  
407 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
408 408  
409 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
336 +[[image:image-20220723113448-7.png||height="995" width="450"]]
410 410  
411 411  
339 +**Block Explain:**
412 412  
413 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
341 +1.  Display LA66 USB LoRaWAN Module connection status
414 414  
343 +2.  Check and reconnect
415 415  
416 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
345 +3.  Turn send timestamps on or off
417 417  
347 +4.  Display LoRaWan connection status
418 418  
419 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
349 +5.  Check LoRaWan connection status
420 420  
421 -[[image:image-20220602171233-2.png||height="538" width="800"]]
351 +6.  The RSSI value of the node when the ACK is received
422 422  
353 +7.  Node's Signal Strength Icon
423 423  
355 +8.  Configure Location Uplink Interval
424 424  
425 -(% style="color:blue" %)**2. Install Minicom in RPi.**
357 +9.  AT command input box
426 426  
427 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
359 +10.  Send Button:  Send input box info to LA66 USB Adapter
428 428  
429 - (% style="background-color:yellow" %)**apt update**
361 +11.  Output Log from LA66 USB adapter
430 430  
431 - (% style="background-color:yellow" %)**apt install minicom**
363 +12.  clear log button
432 432  
365 +13.  exit button
433 433  
434 -Use minicom to connect to the RPI's terminal
435 435  
436 -[[image:image-20220602153146-3.png||height="439" width="500"]]
437 437  
369 +LA66 USB LoRaWAN Module not connected
438 438  
439 439  
440 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
372 +[[image:image-20220723110520-5.png||height="677" width="508"]]
441 441  
442 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
443 443  
444 444  
445 -[[image:image-20220602154928-5.png||height="436" width="500"]]
376 +Connect LA66 USB LoRaWAN Module
446 446  
447 447  
379 +[[image:image-20220723110626-6.png||height="681" width="511"]]
448 448  
449 -(% style="color:blue" %)**4. Send Uplink message**
450 450  
451 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
452 452  
453 -example: AT+SENDB=01,02,8,05820802581ea0a5
454 454  
384 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
455 455  
456 -[[image:image-20220602160339-6.png||height="517" width="600"]]
457 457  
387 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
458 458  
459 459  
460 -Check to see if TTN received the message
390 +[[image:image-20220723134549-8.png]]
461 461  
462 -[[image:image-20220602160627-7.png||height="369" width="800"]]
463 463  
464 464  
394 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
465 465  
466 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
467 467  
397 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
468 468  
399 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
469 469  
470 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
401 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
471 471  
403 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
472 472  
473 473  
406 +Example output in NodeRed is as below:
474 474  
475 -= 4.  Order Info =
408 +[[image:image-20220723144339-1.png]]
476 476  
477 477  
478 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
479 479  
412 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
480 480  
414 +
415 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
416 +
417 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
418 +
419 +
420 +[[image:image-20220723150132-2.png]]
421 +
422 +
423 +
424 += 2.  FAQ =
425 +
426 +
427 +== 2.1  How to Compile Source Code for LA66? ==
428 +
429 +
430 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
431 +
432 +
433 +
434 += 3.  Order Info =
435 +
436 +
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
438 +
439 +
481 481  (% style="color:blue" %)**XXX**(%%): The default frequency band
482 482  
483 483  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -490,8 +490,13 @@
490 490  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
491 491  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
492 492  
493 -= 5.  Reference =
494 494  
495 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
496 496  
454 +
455 += 4.  Reference =
456 +
457 +
458 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 +
497 497  
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0