Skip to Content
Last modified by Xiaoling on 2025/02/07 16:37
From version 92.1
edited by Edwin Chen
on 2022/07/15 00:11
Change comment: Uploaded new attachment "image-20220715001142-3.png", version {1}
To version 171.1
edited by Bei Jinggeng
on 2024/03/15 09:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Bei
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="194" width="294"]][[image:image-20240101111030-2.png]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,23 +37,26 @@
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  == 1.3  Specification ==
51 51  
57 +
52 52  * CPU: 32-bit 48 MHz
53 53  * Flash: 256KB
54 54  * RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
57 57  * Frequency Range: 150 MHz ~~ 960 MHz
58 58  * Maximum Power +22 dBm constant RF output
59 59  * High sensitivity: -148 dBm
... ... @@ -65,411 +65,376 @@
65 65  ** Operating: 10 ~~ 95% (Non-Condensing)
66 66  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 67  * LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 69  
70 -== 1.4  AT Command ==
74 +== 1.4  Pin Mapping & LED ==
71 71  
72 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
73 73  
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
74 74  
75 -== 1.5  Dimension ==
76 76  
77 -[[image:image-20220517072526-1.png]]
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
78 78  
79 79  
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
85 +)))
80 80  
81 -== 1.6  Pin Mapping ==
87 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
82 82  
89 +[[image:image-20220723100027-1.png]]
83 83  
84 -[[image:image-20220523101537-1.png]]
85 85  
92 +Open the serial port tool
86 86  
94 +[[image:image-20220602161617-8.png]]
87 87  
88 -== 1.7  Land Pattern ==
89 89  
90 -[[image:image-20220517072821-2.png]]
97 +[[image:image-20220602161718-9.png||height="457" width="800"]]
91 91  
92 92  
100 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
93 93  
94 -= 2.  LA66 LoRaWAN Shield =
102 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
95 95  
104 +[[image:image-20220602161935-10.png||height="498" width="800"]]
96 96  
97 -== 2.1  Overview ==
98 98  
107 +(% style="color:blue" %)**3.  See Uplink Command**
99 99  
100 -[[image:image-20220715000826-2.png||height="386" width="449"]]
109 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
101 101  
111 +example: AT+SENDB=01,02,8,05820802581ea0a5
102 102  
103 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
113 +[[image:image-20220602162157-11.png||height="497" width="800"]]
104 104  
105 -(((
106 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 -)))
108 108  
109 -(((
110 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 -)))
116 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
112 112  
113 -(((
114 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 -)))
118 +[[image:image-20220817093644-1.png]]
116 116  
117 -(((
118 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 -)))
120 120  
121 +== 1.6  Example: How to join helium ==
121 121  
122 -== 2.2  Features ==
123 123  
124 -* Arduino Shield base on LA66 LoRaWAN module
125 -* Support LoRaWAN v1.0.4 protocol
126 -* Support peer-to-peer protocol
127 -* TCXO crystal to ensure RF performance on low temperature
128 -* SMA connector
129 -* Available in different frequency LoRaWAN frequency bands.
130 -* World-wide unique OTAA keys.
131 -* AT Command via UART-TTL interface
132 -* Firmware upgradable via UART interface
133 -* Ultra-long RF range
124 +(% style="color:blue" %)**1.  Create a new device.**
134 134  
135 -== 2.3  Specification ==
126 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
136 136  
137 -* CPU: 32-bit 48 MHz
138 -* Flash: 256KB
139 -* RAM: 64KB
140 -* Input Power Range: 1.8v ~~ 3.7v
141 -* Power Consumption: < 4uA.
142 -* Frequency Range: 150 MHz ~~ 960 MHz
143 -* Maximum Power +22 dBm constant RF output
144 -* High sensitivity: -148 dBm
145 -* Temperature:
146 -** Storage: -55 ~~ +125℃
147 -** Operating: -40 ~~ +85℃
148 -* Humidity:
149 -** Storage: 5 ~~ 95% (Non-Condensing)
150 -** Operating: 10 ~~ 95% (Non-Condensing)
151 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 -* LoRa Rx current: <9 mA
153 -* I/O Voltage: 3.3v
154 154  
155 -== 2.4  Pin Mapping & LED ==
129 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
156 156  
131 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
157 157  
158 158  
159 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
134 +(% style="color:blue" %)**3.  Use AT commands.**
160 160  
136 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
161 161  
162 162  
163 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
139 +(% style="color:blue" %)**4.  Use the serial port tool**
164 164  
141 +[[image:image-20220909151517-2.png||height="543" width="708"]]
165 165  
166 166  
167 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
144 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
168 168  
146 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
169 169  
170 170  
171 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
149 +(% style="color:blue" %)**6.  Network successfully.**
172 172  
151 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
173 173  
174 -=== 2.8.1  Items needed for update ===
175 175  
176 -1. LA66 LoRaWAN Shield
177 -1. Arduino
178 -1. USB TO TTL Adapter
154 +(% style="color:blue" %)**7.  Send uplink using command**
179 179  
156 +[[image:image-20220912085244-1.png]]
180 180  
181 -[[image:image-20220602100052-2.png||height="385" width="600"]]
158 +[[image:image-20220912085307-2.png]]
182 182  
183 183  
184 -=== 2.8.2  Connection ===
161 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
185 185  
186 186  
187 -[[image:image-20220602101311-3.png||height="276" width="600"]]
164 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
188 188  
189 189  
190 -(((
191 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
192 -)))
167 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
194 -(((
195 -(% style="background-color:yellow" %)**GND  <-> GND
196 -TXD  <->  TXD
197 -RXD  <->  RXD**
198 -)))
169 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
199 199  
200 200  
201 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
172 +(% style="color:red" %)**Preconditions:**
202 202  
203 -Connect USB TTL Adapter to PC after connecting the wires
174 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
204 204  
176 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
205 205  
206 -[[image:image-20220602102240-4.png||height="304" width="600"]]
207 207  
179 +(% style="color:blue" %)**Steps for usage:**
208 208  
209 -=== 2.8.3  Upgrade steps ===
181 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
210 210  
183 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
211 211  
212 -==== 1.  Switch SW1 to put in ISP position ====
185 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
213 213  
214 214  
215 -[[image:image-20220602102824-5.png||height="306" width="600"]]
188 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
216 216  
217 217  
191 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
218 218  
219 -==== 2.  Press the RST switch once ====
220 220  
194 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
221 221  
222 -[[image:image-20220602104701-12.png||height="285" width="600"]]
196 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
223 223  
198 +[[image:image-20220723100439-2.png]]
224 224  
225 225  
226 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
201 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
227 227  
203 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
228 228  
229 -(((
230 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
231 -)))
205 + (% style="background-color:yellow" %)**apt update**
232 232  
207 + (% style="background-color:yellow" %)**apt install minicom**
233 233  
234 -[[image:image-20220602103227-6.png]]
209 +Use minicom to connect to the RPI's terminal
235 235  
211 +[[image:image-20220602153146-3.png||height="439" width="500"]]
236 236  
237 -[[image:image-20220602103357-7.png]]
238 238  
214 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
239 239  
216 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
240 240  
241 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
242 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
218 +[[image:image-20220602154928-5.png||height="436" width="500"]]
243 243  
244 244  
245 -[[image:image-20220602103844-8.png]]
221 +(% style="color:blue" %)**4.  Send Uplink message**
246 246  
223 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
247 247  
225 +example: AT+SENDB=01,02,8,05820802581ea0a5
248 248  
249 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
250 -(% style="color:blue" %)**3. Select the bin file to burn**
227 +[[image:image-20220602160339-6.png||height="517" width="600"]]
251 251  
252 252  
253 -[[image:image-20220602104144-9.png]]
230 +Check to see if TTN received the message
254 254  
255 255  
256 -[[image:image-20220602104251-10.png]]
233 +[[image:image-20220602160627-7.png||height="369" width="800"]]
257 257  
258 258  
259 -[[image:image-20220602104402-11.png]]
236 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
260 260  
238 +=== 1.9.1  Hardware and Software Connection ===
261 261  
262 262  
263 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
264 -(% style="color:blue" %)**4. Click to start the download**
241 +(% class="wikigeneratedid" id="HOverviewFF1A" %)
242 +(% style="color:blue" %)**Overview：**
265 265  
266 -[[image:image-20220602104923-13.png]]
244 +(((
245 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
267 267  
247 +* Send real-time location information of mobile phone to LoRaWAN network.
248 +* Check LoRaWAN network signal strengh.
249 +* Manually send messages to LoRaWAN network.
250 +)))
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
271 -(% style="color:blue" %)**5. Check update process**
272 272  
254 +(% class="wikigeneratedid" id="HHardwareConnection:" %)
255 +(% style="color:blue" %)**Hardware Connection:**
273 273  
274 -[[image:image-20220602104948-14.png]]
257 +A USB to Type-C adapter is needed to connect to a Mobile phone.
275 275  
259 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
276 276  
261 +[[image:image-20220813174353-2.png||height="360" width="313"]]
277 277  
278 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
279 -(% style="color:blue" %)**The following picture shows that the burning is successful**
280 280  
281 -[[image:image-20220602105251-15.png]]
264 +(% class="wikigeneratedid" id="HDownloadandInstallApp:" %)
265 +(% style="color:blue" %)**Download and Install App:**
282 282  
267 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
283 283  
269 +[[image:image-20220813173738-1.png]]
284 284  
285 -= 3.  LA66 USB LoRaWAN Adapter =
286 286  
272 +(% class="wikigeneratedid" id="HUseofAPP:" %)
273 +(% style="color:blue" %)**Use of APP:**
287 287  
288 -== 3.1  Overview ==
275 +Function and page introduction:
289 289  
290 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
277 +[[image:image-20220723113448-7.png||height="995" width="450"]]
291 291  
292 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
293 293  
294 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
280 +(% style="color:blue" %)**Block Explain:**
295 295  
296 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
282 +1.  Display LA66 USB LoRaWAN Module connection status
297 297  
298 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
284 +2.  Check and reconnect
299 299  
286 +3.  Turn send timestamps on or off
300 300  
301 -== 3.2  Features ==
288 +4.  Display LoRaWan connection status
302 302  
303 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
304 -* Ultra-long RF range
305 -* Support LoRaWAN v1.0.4 protocol
306 -* Support peer-to-peer protocol
307 -* TCXO crystal to ensure RF performance on low temperature
308 -* Spring RF antenna
309 -* Available in different frequency LoRaWAN frequency bands.
310 -* World-wide unique OTAA keys.
311 -* AT Command via UART-TTL interface
312 -* Firmware upgradable via UART interface
290 +5.  Check LoRaWan connection status
313 313  
314 -== 3.3  Specification ==
292 +6.  The RSSI value of the node when the ACK is received
315 315  
316 -* CPU: 32-bit 48 MHz
317 -* Flash: 256KB
318 -* RAM: 64KB
319 -* Input Power Range: 5v
320 -* Frequency Range: 150 MHz ~~ 960 MHz
321 -* Maximum Power +22 dBm constant RF output
322 -* High sensitivity: -148 dBm
323 -* Temperature:
324 -** Storage: -55 ~~ +125℃
325 -** Operating: -40 ~~ +85℃
326 -* Humidity:
327 -** Storage: 5 ~~ 95% (Non-Condensing)
328 -** Operating: 10 ~~ 95% (Non-Condensing)
329 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
330 -* LoRa Rx current: <9 mA
294 +7.  Node's Signal Strength Icon
331 331  
332 -== 3.4  Pin Mapping & LED ==
296 +8.  Configure Location Uplink Interval
333 333  
298 +9.  AT command input box
334 334  
300 +10.  Send Button:  Send input box info to LA66 USB Adapter
335 335  
336 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
302 +11.  Output Log from LA66 USB adapter
337 337  
304 +12.  clear log button
338 338  
339 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
306 +13.  exit button
340 340  
341 341  
342 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
309 +LA66 USB LoRaWAN Module not connected:
343 343  
311 +[[image:image-20220723110520-5.png||height="677" width="508"]]
344 344  
345 -[[image:image-20220602171217-1.png||height="538" width="800"]]
346 346  
314 +Connect LA66 USB LoRaWAN Module:
347 347  
348 -Open the serial port tool
316 +[[image:image-20220723110626-6.png||height="681" width="511"]]
349 349  
350 -[[image:image-20220602161617-8.png]]
351 351  
352 -[[image:image-20220602161718-9.png||height="457" width="800"]]
319 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
353 353  
354 354  
322 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
355 355  
356 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
357 357  
358 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
325 +[[image:image-20220723134549-8.png]]
359 359  
360 360  
361 -[[image:image-20220602161935-10.png||height="498" width="800"]]
362 362  
329 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
363 363  
364 364  
365 -(% style="color:blue" %)**3. See Uplink Command**
332 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
366 366  
367 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
334 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
368 368  
369 -example: AT+SENDB=01,02,8,05820802581ea0a5
336 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
370 370  
371 -[[image:image-20220602162157-11.png||height="497" width="800"]]
338 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
372 372  
373 373  
341 +Example output in NodeRed is as below:
374 374  
375 -(% style="color:blue" %)**4. Check to see if TTN received the message**
343 +[[image:image-20220723144339-1.png]]
376 376  
377 -[[image:image-20220602162331-12.png||height="420" width="800"]]
378 378  
346 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
379 379  
348 +=== 1.10.1 LA66V1 Update method ===
380 380  
381 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
350 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
382 382  
352 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
383 383  
384 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
354 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
385 385  
356 +[[image:image-20220723150132-2.png||height="514" width="506"]]
386 386  
387 -(% style="color:red" %)**Preconditions:**
388 388  
389 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
359 +(% class="wikigeneratedid" id="HOpentheUpgradetool28TremoProgrammer29inPCandUpgrade" %)
360 +(% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade**
390 390  
391 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
362 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
392 392  
364 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
393 393  
366 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png" height="486" width="390"]]
394 394  
395 -(% style="color:blue" %)**Steps for usage:**
396 396  
397 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
369 +**2.  Select the COM port corresponding to USB TTL**
398 398  
399 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
371 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png" height="291" width="389"]]
400 400  
401 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
402 402  
374 +**3.  Select the bin file to burn**
403 403  
376 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png" height="318" width="405"]]
404 404  
405 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
378 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png" height="330" width="579"]]
406 406  
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png" height="290" width="372"]]
407 407  
408 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
409 409  
383 +**4.  Click to start the download**
410 410  
411 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
385 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png" height="462" width="372"]]
412 412  
413 -[[image:image-20220602171233-2.png||height="538" width="800"]]
414 414  
388 +**5.  Check update process**
415 415  
390 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png" height="483" width="386"]]
416 416  
417 -(% style="color:blue" %)**2. Install Minicom in RPi.**
418 418  
419 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
393 +**The following picture shows that the burning is successful**
420 420  
421 - (% style="background-color:yellow" %)**apt update**
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png" height="513" width="406"]]
422 422  
423 - (% style="background-color:yellow" %)**apt install minicom**
397 +(% class="wikigeneratedid" %)
398 +=== ===
424 424  
400 +(% class="wikigeneratedid" %)
401 +=== 1.10.2 LA66V2 Update method ===
425 425  
426 -Use minicom to connect to the RPI's terminal
403 +Please refer to this link
427 427  
428 -[[image:image-20220602153146-3.png||height="439" width="500"]]
405 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]
429 429  
430 430  
408 += 2.  FAQ =
431 431  
432 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
410 +== 2.1  How to Compile Source Code for LA66? ==
433 433  
434 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
435 435  
413 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
436 436  
437 -[[image:image-20220602154928-5.png||height="436" width="500"]]
438 438  
416 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
439 439  
440 440  
441 -(% style="color:blue" %)**4. Send Uplink message**
419 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
442 442  
443 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
444 444  
445 -example: AT+SENDB=01,02,8,05820802581ea0a5
422 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
446 446  
447 447  
448 -[[image:image-20220602160339-6.png||height="517" width="600"]]
425 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
449 449  
450 450  
428 +== 2.4 How to use external antenna via ipex connector? ==
451 451  
452 -Check to see if TTN received the message
453 453  
454 -[[image:image-20220602160627-7.png||height="369" width="800"]]
431 +You need to remove the spring antenna first, and also remove the resistor and capacitor.
432 +Connect external antenna.
455 455  
434 +[[image:image-20231129155939-1.png||height="529" width="397"]]
456 456  
457 457  
458 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
437 += 3.  Order Info =
459 459  
460 460  
440 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
461 461  
462 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
463 463  
464 -
465 -
466 -
467 -= 4.  Order Info =
468 -
469 -
470 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
471 -
472 -
473 473  (% style="color:blue" %)**XXX**(%%): The default frequency band
474 474  
475 475  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -482,8 +482,37 @@
482 482  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
483 483  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
484 484  
485 -= 5.  Reference =
455 += 4.  Reference =
486 486  
487 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
488 488  
458 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 +
461 += 5.  FCC Statement =
462 +
463 +
464 +(% style="color:red" %)**FCC Caution:**
465 +
466 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
467 +
468 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
469 +
470 +
471 +(% style="color:red" %)**IMPORTANT NOTE: **
472 +
473 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
474 +
475 +—Reorient or relocate the receiving antenna.
476 +
477 +—Increase the separation between the equipment and receiver.
478 +
479 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
480 +
481 +—Consult the dealer or an experienced radio/TV technician for help.
482 +
483 +
484 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
485 +
486 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
487 +
489 489  
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content
image-20231129155939-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 MB
Content
image-20240101111021-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content
image-20240101111030-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +11.2 KB
Content