Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 92.1 >
edited by Edwin Chen
on 2022/07/15 00:11
To version < 162.1 >
edited by Bei Jinggeng
on 2023/11/29 15:49
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Bei
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,23 +37,26 @@
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 50  == 1.3  Specification ==
51 51  
57 +
52 52  * CPU: 32-bit 48 MHz
53 53  * Flash: 256KB
54 54  * RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
57 57  * Frequency Range: 150 MHz ~~ 960 MHz
58 58  * Maximum Power +22 dBm constant RF output
59 59  * High sensitivity: -148 dBm
... ... @@ -65,411 +65,372 @@
65 65  ** Operating: 10 ~~ 95% (Non-Condensing)
66 66  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 67  * LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 69  
70 -== 1.4  AT Command ==
74 +== 1.4  Pin Mapping & LED ==
71 71  
72 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
73 73  
77 +[[image:image-20220813183239-3.png||height="526" width="662"]]
74 74  
75 -== 1.5  Dimension ==
76 76  
77 -[[image:image-20220517072526-1.png]]
80 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
78 78  
79 79  
83 +(((
84 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
80 80  
81 -== 1.6  Pin Mapping ==
86 +
87 +)))
82 82  
89 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
83 83  
84 -[[image:image-20220523101537-1.png]]
91 +[[image:image-20220723100027-1.png]]
85 85  
86 86  
94 +Open the serial port tool
87 87  
88 -== 1.7  Land Pattern ==
96 +[[image:image-20220602161617-8.png]]
89 89  
90 -[[image:image-20220517072821-2.png]]
91 91  
99 +[[image:image-20220602161718-9.png||height="457" width="800"]]
92 92  
93 93  
94 -= 2.  LA66 LoRaWAN Shield =
102 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
95 95  
104 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
96 96  
97 -== 2.1  Overview ==
106 +[[image:image-20220602161935-10.png||height="498" width="800"]]
98 98  
99 99  
100 -[[image:image-20220715000826-2.png||height="386" width="449"]]
109 +(% style="color:blue" %)**3.  See Uplink Command**
101 101  
111 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
102 102  
103 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
113 +example: AT+SENDB=01,02,8,05820802581ea0a5
104 104  
105 -(((
106 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
107 -)))
115 +[[image:image-20220602162157-11.png||height="497" width="800"]]
108 108  
109 -(((
110 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
111 -)))
112 112  
113 -(((
114 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
115 -)))
118 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
116 116  
117 -(((
118 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
119 -)))
120 +[[image:image-20220817093644-1.png]]
120 120  
121 121  
122 -== 2.2  Features ==
123 +== 1.6  Example: How to join helium ==
123 123  
124 -* Arduino Shield base on LA66 LoRaWAN module
125 -* Support LoRaWAN v1.0.4 protocol
126 -* Support peer-to-peer protocol
127 -* TCXO crystal to ensure RF performance on low temperature
128 -* SMA connector
129 -* Available in different frequency LoRaWAN frequency bands.
130 -* World-wide unique OTAA keys.
131 -* AT Command via UART-TTL interface
132 -* Firmware upgradable via UART interface
133 -* Ultra-long RF range
134 134  
135 -== 2.3  Specification ==
126 +(% style="color:blue" %)**1.  Create a new device.**
136 136  
137 -* CPU: 32-bit 48 MHz
138 -* Flash: 256KB
139 -* RAM: 64KB
140 -* Input Power Range: 1.8v ~~ 3.7v
141 -* Power Consumption: < 4uA.
142 -* Frequency Range: 150 MHz ~~ 960 MHz
143 -* Maximum Power +22 dBm constant RF output
144 -* High sensitivity: -148 dBm
145 -* Temperature:
146 -** Storage: -55 ~~ +125℃
147 -** Operating: -40 ~~ +85℃
148 -* Humidity:
149 -** Storage: 5 ~~ 95% (Non-Condensing)
150 -** Operating: 10 ~~ 95% (Non-Condensing)
151 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
152 -* LoRa Rx current: <9 mA
153 -* I/O Voltage: 3.3v
128 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
154 154  
155 -== 2.4  Pin Mapping & LED ==
156 156  
131 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
157 157  
133 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
158 158  
159 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
160 160  
136 +(% style="color:blue" %)**3.  Use AT commands.**
161 161  
138 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
162 162  
163 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
164 164  
141 +(% style="color:blue" %)**4.  Use the serial port tool**
165 165  
143 +[[image:image-20220909151517-2.png||height="543" width="708"]]
166 166  
167 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
168 168  
146 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
169 169  
148 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
170 170  
171 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
172 172  
151 +(% style="color:blue" %)**6.  Network successfully.**
173 173  
174 -=== 2.8.1  Items needed for update ===
153 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
175 175  
176 -1. LA66 LoRaWAN Shield
177 -1. Arduino
178 -1. USB TO TTL Adapter
179 179  
156 +(% style="color:blue" %)**7.  Send uplink using command**
180 180  
181 -[[image:image-20220602100052-2.png||height="385" width="600"]]
158 +[[image:image-20220912085244-1.png]]
182 182  
160 +[[image:image-20220912085307-2.png]]
183 183  
184 -=== 2.8.2  Connection ===
185 185  
163 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
186 186  
187 -[[image:image-20220602101311-3.png||height="276" width="600"]]
188 188  
166 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
189 189  
190 -(((
191 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
192 -)))
193 193  
194 -(((
195 -(% style="background-color:yellow" %)**GND  <-> GND
196 -TXD  <->  TXD
197 -RXD  <->  RXD**
198 -)))
169 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
199 199  
171 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
200 200  
201 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
202 202  
203 -Connect USB TTL Adapter to PC after connecting the wires
174 +(% style="color:red" %)**Preconditions:**
204 204  
176 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
205 205  
206 -[[image:image-20220602102240-4.png||height="304" width="600"]]
178 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
207 207  
208 208  
209 -=== 2.8.3  Upgrade steps ===
210 210  
182 +(% style="color:blue" %)**Steps for usage:**
211 211  
212 -==== 1.  Switch SW1 to put in ISP position ====
184 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
213 213  
186 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
214 214  
215 -[[image:image-20220602102824-5.png||height="306" width="600"]]
188 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
216 216  
217 217  
191 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
218 218  
219 -==== 2.  Press the RST switch once ====
220 220  
194 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
221 221  
222 -[[image:image-20220602104701-12.png||height="285" width="600"]]
223 223  
197 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
224 224  
225 225  
226 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
200 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
227 227  
202 +[[image:image-20220723100439-2.png]]
228 228  
229 -(((
230 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
231 -)))
232 232  
205 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
233 233  
234 -[[image:image-20220602103227-6.png]]
207 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
235 235  
209 + (% style="background-color:yellow" %)**apt update**
236 236  
237 -[[image:image-20220602103357-7.png]]
211 + (% style="background-color:yellow" %)**apt install minicom**
238 238  
213 +Use minicom to connect to the RPI's terminal
239 239  
215 +[[image:image-20220602153146-3.png||height="439" width="500"]]
240 240  
241 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
242 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
243 243  
218 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
244 244  
245 -[[image:image-20220602103844-8.png]]
220 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
246 246  
222 +[[image:image-20220602154928-5.png||height="436" width="500"]]
247 247  
248 248  
249 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
250 -(% style="color:blue" %)**3. Select the bin file to burn**
225 +(% style="color:blue" %)**4.  Send Uplink message**
251 251  
227 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
252 252  
253 -[[image:image-20220602104144-9.png]]
229 +example: AT+SENDB=01,02,8,05820802581ea0a5
254 254  
231 +[[image:image-20220602160339-6.png||height="517" width="600"]]
255 255  
256 -[[image:image-20220602104251-10.png]]
257 257  
258 258  
259 -[[image:image-20220602104402-11.png]]
235 +Check to see if TTN received the message
260 260  
261 261  
238 +[[image:image-20220602160627-7.png||height="369" width="800"]]
262 262  
263 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
264 -(% style="color:blue" %)**4. Click to start the download**
265 265  
266 -[[image:image-20220602104923-13.png]]
241 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
267 267  
243 +=== 1.9.1  Hardware and Software Connection ===
268 268  
269 269  
270 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
271 -(% style="color:blue" %)**5. Check update process**
272 272  
247 +==== (% style="color:blue" %)**Overview：**(%%) ====
273 273  
274 -[[image:image-20220602104948-14.png]]
275 275  
250 +(((
251 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
276 276  
253 +* Send real-time location information of mobile phone to LoRaWAN network.
254 +* Check LoRaWAN network signal strengh.
255 +* Manually send messages to LoRaWAN network.
256 +)))
277 277  
278 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
279 -(% style="color:blue" %)**The following picture shows that the burning is successful**
280 280  
281 -[[image:image-20220602105251-15.png]]
282 282  
283 283  
261 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
284 284  
285 -= 3.  LA66 USB LoRaWAN Adapter =
286 286  
264 +A USB to Type-C adapter is needed to connect to a Mobile phone.
287 287  
288 -== 3.1  Overview ==
266 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
289 289  
290 -(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
268 +[[image:image-20220813174353-2.png||height="360" width="313"]]
291 291  
292 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
293 293  
294 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
295 295  
296 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
272 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
297 297  
298 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
299 299  
275 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
300 300  
301 -== 3.2  Features ==
302 302  
303 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
304 -* Ultra-long RF range
305 -* Support LoRaWAN v1.0.4 protocol
306 -* Support peer-to-peer protocol
307 -* TCXO crystal to ensure RF performance on low temperature
308 -* Spring RF antenna
309 -* Available in different frequency LoRaWAN frequency bands.
310 -* World-wide unique OTAA keys.
311 -* AT Command via UART-TTL interface
312 -* Firmware upgradable via UART interface
278 +[[image:image-20220813173738-1.png]]
313 313  
314 -== 3.3  Specification ==
315 315  
316 -* CPU: 32-bit 48 MHz
317 -* Flash: 256KB
318 -* RAM: 64KB
319 -* Input Power Range: 5v
320 -* Frequency Range: 150 MHz ~~ 960 MHz
321 -* Maximum Power +22 dBm constant RF output
322 -* High sensitivity: -148 dBm
323 -* Temperature:
324 -** Storage: -55 ~~ +125℃
325 -** Operating: -40 ~~ +85℃
326 -* Humidity:
327 -** Storage: 5 ~~ 95% (Non-Condensing)
328 -** Operating: 10 ~~ 95% (Non-Condensing)
329 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
330 -* LoRa Rx current: <9 mA
331 331  
332 -== 3.4  Pin Mapping & LED ==
282 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
333 333  
334 334  
285 +Function and page introduction
335 335  
336 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
337 337  
288 +[[image:image-20220723113448-7.png||height="995" width="450"]]
338 338  
339 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
340 340  
291 +(% style="color:blue" %)**Block Explain:**
341 341  
342 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
293 +1.  Display LA66 USB LoRaWAN Module connection status
343 343  
295 +2.  Check and reconnect
344 344  
345 -[[image:image-20220602171217-1.png||height="538" width="800"]]
297 +3.  Turn send timestamps on or off
346 346  
299 +4.  Display LoRaWan connection status
347 347  
348 -Open the serial port tool
301 +5.  Check LoRaWan connection status
349 349  
350 -[[image:image-20220602161617-8.png]]
303 +6.  The RSSI value of the node when the ACK is received
351 351  
352 -[[image:image-20220602161718-9.png||height="457" width="800"]]
305 +7.  Node's Signal Strength Icon
353 353  
307 +8.  Configure Location Uplink Interval
354 354  
309 +9.  AT command input box
355 355  
356 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
311 +10.  Send Button:  Send input box info to LA66 USB Adapter
357 357  
358 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
313 +11.  Output Log from LA66 USB adapter
359 359  
315 +12.  clear log button
360 360  
361 -[[image:image-20220602161935-10.png||height="498" width="800"]]
317 +13.  exit button
362 362  
363 363  
364 364  
365 -(% style="color:blue" %)**3. See Uplink Command**
321 +LA66 USB LoRaWAN Module not connected
366 366  
367 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
368 368  
369 -example: AT+SENDB=01,02,8,05820802581ea0a5
324 +[[image:image-20220723110520-5.png||height="677" width="508"]]
370 370  
371 -[[image:image-20220602162157-11.png||height="497" width="800"]]
372 372  
373 373  
328 +Connect LA66 USB LoRaWAN Module
374 374  
375 -(% style="color:blue" %)**4. Check to see if TTN received the message**
376 376  
377 -[[image:image-20220602162331-12.png||height="420" width="800"]]
331 +[[image:image-20220723110626-6.png||height="681" width="511"]]
378 378  
379 379  
334 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
380 380  
381 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
382 382  
337 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
383 383  
384 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
385 385  
340 +[[image:image-20220723134549-8.png]]
386 386  
387 -(% style="color:red" %)**Preconditions:**
388 388  
389 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
390 390  
391 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
344 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
392 392  
393 393  
347 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
394 394  
395 -(% style="color:blue" %)**Steps for usage:**
349 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
396 396  
397 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
351 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
398 398  
399 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
353 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
400 400  
401 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
402 402  
356 +Example output in NodeRed is as below:
403 403  
358 +[[image:image-20220723144339-1.png]]
404 404  
405 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
406 406  
361 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
407 407  
408 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
409 409  
364 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
410 410  
411 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
366 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
412 412  
413 -[[image:image-20220602171233-2.png||height="538" width="800"]]
368 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
414 414  
370 +[[image:image-20220723150132-2.png]]
415 415  
416 416  
417 -(% style="color:blue" %)**2. Install Minicom in RPi.**
418 418  
419 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
374 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
420 420  
421 - (% style="background-color:yellow" %)**apt update**
422 422  
423 - (% style="background-color:yellow" %)**apt install minicom**
377 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
424 424  
379 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
425 425  
426 -Use minicom to connect to the RPI's terminal
381 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
427 427  
428 -[[image:image-20220602153146-3.png||height="439" width="500"]]
429 429  
384 +**2.  Select the COM port corresponding to USB TTL**
430 430  
386 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
431 431  
432 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
433 433  
434 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
389 +**3.  Select the bin file to burn**
435 435  
391 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
436 436  
437 -[[image:image-20220602154928-5.png||height="436" width="500"]]
393 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
438 438  
395 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
439 439  
440 440  
441 -(% style="color:blue" %)**4. Send Uplink message**
398 +**4.  Click to start the download**
442 442  
443 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
400 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
444 444  
445 -example: AT+SENDB=01,02,8,05820802581ea0a5
446 446  
403 +**5.  Check update process**
447 447  
448 -[[image:image-20220602160339-6.png||height="517" width="600"]]
405 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
449 449  
450 450  
408 +**The following picture shows that the burning is successful**
451 451  
452 -Check to see if TTN received the message
410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
453 453  
454 -[[image:image-20220602160627-7.png||height="369" width="800"]]
455 455  
413 += 2.  FAQ =
456 456  
415 +== 2.1  How to Compile Source Code for LA66? ==
457 457  
458 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
459 459  
418 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
460 460  
461 461  
462 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
421 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
463 463  
464 464  
424 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
465 465  
466 466  
467 -= 4.  Order Info =
427 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
468 468  
469 469  
470 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
430 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
471 471  
472 472  
433 += 3.  Order Info =
434 +
435 +
436 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
437 +
438 +
473 473  (% style="color:blue" %)**XXX**(%%): The default frequency band
474 474  
475 475  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -482,8 +482,37 @@
482 482  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
483 483  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
484 484  
485 -= 5.  Reference =
451 += 4.  Reference =
486 486  
487 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
488 488  
454 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
455 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
456 +
457 += 5.  FCC Statement =
458 +
459 +
460 +(% style="color:red" %)**FCC Caution:**
461 +
462 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
463 +
464 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
465 +
466 +
467 +(% style="color:red" %)**IMPORTANT NOTE: **
468 +
469 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
470 +
471 +—Reorient or relocate the receiving antenna.
472 +
473 +—Increase the separation between the equipment and receiver.
474 +
475 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
476 +
477 +—Consult the dealer or an experienced radio/TV technician for help.
478 +
479 +
480 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
481 +
482 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
483 +
489 489  
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0