Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 90.1 >
edited by Edwin Chen
on 2022/07/15 00:10
To version < 161.3 >
edited by Xiaoling
on 2023/09/19 18:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -6,20 +6,22 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
13 +== 1.1  Overview ==
14 14  
15 -(((
16 -[[image:image-20220715000242-1.png||height="110" width="132"]]
17 17  
18 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
16 +[[image:image-20220715001142-3.png||height="145" width="220"]]
17 +
18 +
19 +(((
20 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
19 19  )))
20 20  
21 21  (((
22 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
24 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
23 23  )))
24 24  
25 25  (((
... ... @@ -37,24 +37,26 @@
37 37  
38 38  == 1.2  Features ==
39 39  
40 -* Support LoRaWAN v1.0.4 protocol
42 +
43 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
44 +* Ultra-long RF range
45 +* Support LoRaWAN v1.0.3 protocol
41 41  * Support peer-to-peer protocol
42 42  * TCXO crystal to ensure RF performance on low temperature
43 -* SMD Antenna pad and i-pex antenna connector
48 +* Spring RF antenna
44 44  * Available in different frequency LoRaWAN frequency bands.
45 45  * World-wide unique OTAA keys.
46 46  * AT Command via UART-TTL interface
47 47  * Firmware upgradable via UART interface
48 -* Ultra-long RF range
53 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
49 49  
50 -
51 51  == 1.3  Specification ==
52 52  
57 +
53 53  * CPU: 32-bit 48 MHz
54 54  * Flash: 256KB
55 55  * RAM: 64KB
56 -* Input Power Range: 1.8v ~~ 3.7v
57 -* Power Consumption: < 4uA.
61 +* Input Power Range: 5v
58 58  * Frequency Range: 150 MHz ~~ 960 MHz
59 59  * Maximum Power +22 dBm constant RF output
60 60  * High sensitivity: -148 dBm
... ... @@ -66,425 +66,373 @@
66 66  ** Operating: 10 ~~ 95% (Non-Condensing)
67 67  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
68 68  * LoRa Rx current: <9 mA
69 -* I/O Voltage: 3.3v
70 70  
71 71  
72 -== 1.4  AT Command ==
75 +== 1.4  Pin Mapping & LED ==
73 73  
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
75 75  
78 +[[image:image-20220813183239-3.png||height="526" width="662"]]
76 76  
77 -== 1.5  Dimension ==
78 78  
79 -[[image:image-20220517072526-1.png]]
81 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
80 80  
81 81  
84 +(((
85 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
82 82  
83 -== 1.6  Pin Mapping ==
87 +
88 +)))
84 84  
90 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
85 85  
86 -[[image:image-20220523101537-1.png]]
92 +[[image:image-20220723100027-1.png]]
87 87  
88 88  
95 +Open the serial port tool
89 89  
90 -== 1.7  Land Pattern ==
97 +[[image:image-20220602161617-8.png]]
91 91  
92 -[[image:image-20220517072821-2.png]]
93 93  
100 +[[image:image-20220602161718-9.png||height="457" width="800"]]
94 94  
95 95  
96 -= 2.  LA66 LoRaWAN Shield =
103 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
97 97  
105 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
98 98  
99 -== 2.1  Overview ==
107 +[[image:image-20220602161935-10.png||height="498" width="800"]]
100 100  
101 101  
102 -[[image:image-20220715000826-2.png||height="386" width="449"]]
110 +(% style="color:blue" %)**3.  See Uplink Command**
103 103  
112 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
104 104  
105 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
114 +example: AT+SENDB=01,02,8,05820802581ea0a5
106 106  
107 -(((
108 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
109 -)))
116 +[[image:image-20220602162157-11.png||height="497" width="800"]]
110 110  
111 -(((
112 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
113 -)))
114 114  
115 -(((
116 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
117 -)))
119 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
118 118  
119 -(((
120 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
121 -)))
121 +[[image:image-20220817093644-1.png]]
122 122  
123 123  
124 -== 2.2  Features ==
124 +== 1.6  Example: How to join helium ==
125 125  
126 -* Arduino Shield base on LA66 LoRaWAN module
127 -* Support LoRaWAN v1.0.4 protocol
128 -* Support peer-to-peer protocol
129 -* TCXO crystal to ensure RF performance on low temperature
130 -* SMA connector
131 -* Available in different frequency LoRaWAN frequency bands.
132 -* World-wide unique OTAA keys.
133 -* AT Command via UART-TTL interface
134 -* Firmware upgradable via UART interface
135 -* Ultra-long RF range
136 136  
127 +(% style="color:blue" %)**1.  Create a new device.**
137 137  
138 -== 2.3  Specification ==
129 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
139 139  
140 -* CPU: 32-bit 48 MHz
141 -* Flash: 256KB
142 -* RAM: 64KB
143 -* Input Power Range: 1.8v ~~ 3.7v
144 -* Power Consumption: < 4uA.
145 -* Frequency Range: 150 MHz ~~ 960 MHz
146 -* Maximum Power +22 dBm constant RF output
147 -* High sensitivity: -148 dBm
148 -* Temperature:
149 -** Storage: -55 ~~ +125℃
150 -** Operating: -40 ~~ +85℃
151 -* Humidity:
152 -** Storage: 5 ~~ 95% (Non-Condensing)
153 -** Operating: 10 ~~ 95% (Non-Condensing)
154 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
155 -* LoRa Rx current: <9 mA
156 -* I/O Voltage: 3.3v
157 157  
132 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
158 158  
159 -== 2.4  Pin Mapping & LED ==
134 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
160 160  
161 161  
137 +(% style="color:blue" %)**3.  Use AT commands.**
162 162  
163 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
139 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
164 164  
165 165  
142 +(% style="color:blue" %)**4.  Use the serial port tool**
166 166  
167 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
144 +[[image:image-20220909151517-2.png||height="543" width="708"]]
168 168  
169 169  
147 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
170 170  
171 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
149 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
172 172  
173 173  
152 +(% style="color:blue" %)**6.  Network successfully.**
174 174  
175 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
176 176  
177 177  
178 -=== 2.8.1  Items needed for update ===
157 +(% style="color:blue" %)**7.  Send uplink using command**
179 179  
180 -1. LA66 LoRaWAN Shield
181 -1. Arduino
182 -1. USB TO TTL Adapter
159 +[[image:image-20220912085244-1.png]]
183 183  
161 +[[image:image-20220912085307-2.png]]
184 184  
185 185  
186 -[[image:image-20220602100052-2.png||height="385" width="600"]]
164 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
187 187  
188 188  
189 -=== 2.8.2  Connection ===
167 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
190 190  
191 191  
192 -[[image:image-20220602101311-3.png||height="276" width="600"]]
170 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
193 193  
172 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
194 194  
195 -(((
196 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
197 -)))
198 198  
199 -(((
200 -(% style="background-color:yellow" %)**GND  <-> GND
201 -TXD  <->  TXD
202 -RXD  <->  RXD**
203 -)))
175 +(% style="color:red" %)**Preconditions:**
204 204  
177 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
205 205  
206 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
179 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
207 207  
208 -Connect USB TTL Adapter to PC after connecting the wires
209 209  
210 210  
211 -[[image:image-20220602102240-4.png||height="304" width="600"]]
183 +(% style="color:blue" %)**Steps for usage:**
212 212  
185 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
213 213  
214 -=== 2.8.3  Upgrade steps ===
187 +(% style="color:blue" %)**2.**(%%) Add [[decoder>>https://github.com/dragino/dragino-end-node-decoder/tree/main/LA66%20USB]] on TTN
215 215  
189 +(% style="color:blue" %)**3.**(%%) Run the python script in PC and see the TTN
216 216  
217 -==== 1.  Switch SW1 to put in ISP position ====
218 218  
192 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
219 219  
220 -[[image:image-20220602102824-5.png||height="306" width="600"]]
221 221  
195 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
222 222  
223 223  
224 -==== 2.  Press the RST switch once ====
198 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
225 225  
226 226  
227 -[[image:image-20220602104701-12.png||height="285" width="600"]]
201 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
228 228  
203 +[[image:image-20220723100439-2.png]]
229 229  
230 230  
231 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
206 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
232 232  
208 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
233 233  
234 -(((
235 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
236 -)))
210 + (% style="background-color:yellow" %)**apt update**
237 237  
212 + (% style="background-color:yellow" %)**apt install minicom**
238 238  
239 -[[image:image-20220602103227-6.png]]
214 +Use minicom to connect to the RPI's terminal
240 240  
216 +[[image:image-20220602153146-3.png||height="439" width="500"]]
241 241  
242 -[[image:image-20220602103357-7.png]]
243 243  
219 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
244 244  
221 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
245 245  
246 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
247 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
223 +[[image:image-20220602154928-5.png||height="436" width="500"]]
248 248  
249 249  
250 -[[image:image-20220602103844-8.png]]
226 +(% style="color:blue" %)**4.  Send Uplink message**
251 251  
228 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
252 252  
230 +example: AT+SENDB=01,02,8,05820802581ea0a5
253 253  
254 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
255 -(% style="color:blue" %)**3. Select the bin file to burn**
232 +[[image:image-20220602160339-6.png||height="517" width="600"]]
256 256  
257 257  
258 -[[image:image-20220602104144-9.png]]
259 259  
236 +Check to see if TTN received the message
260 260  
261 -[[image:image-20220602104251-10.png]]
262 262  
239 +[[image:image-20220602160627-7.png||height="369" width="800"]]
263 263  
264 -[[image:image-20220602104402-11.png]]
265 265  
242 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
266 266  
244 +=== 1.9.1  Hardware and Software Connection ===
267 267  
268 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
269 -(% style="color:blue" %)**4. Click to start the download**
270 270  
271 -[[image:image-20220602104923-13.png]]
272 272  
248 +==== (% style="color:blue" %)**Overview：**(%%) ====
273 273  
274 274  
275 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
276 -(% style="color:blue" %)**5. Check update process**
251 +(((
252 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
277 277  
254 +* Send real-time location information of mobile phone to LoRaWAN network.
255 +* Check LoRaWAN network signal strengh.
256 +* Manually send messages to LoRaWAN network.
257 +)))
278 278  
279 -[[image:image-20220602104948-14.png]]
280 280  
281 281  
282 282  
283 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
284 -(% style="color:blue" %)**The following picture shows that the burning is successful**
262 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
285 285  
286 -[[image:image-20220602105251-15.png]]
287 287  
265 +A USB to Type-C adapter is needed to connect to a Mobile phone.
288 288  
267 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
289 289  
290 -= 3.  LA66 USB LoRaWAN Adapter =
269 +[[image:image-20220813174353-2.png||height="360" width="313"]]
291 291  
292 292  
293 -== 3.1  Overview ==
294 294  
295 -(% style="color:blue" %)LA66 USB LoRaWAN Adapter(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
273 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
296 296  
297 -(((
298 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
299 -)))
300 300  
301 -(((
302 -Each LA66 module includes a (% style="color:blue" %)**world-unique OTAA key**(%%) for LoRaWAN registration.
303 -)))
276 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
304 304  
305 -(((
306 -Besides the support of the LoRaWAN protocol, LA66 also supports (% style="color:blue" %)**open-source peer-to-peer LoRa Protocol**(%%) for the none-LoRaWAN application.
307 -)))
308 308  
309 -(((
310 -LA66 is equipped with (% style="color:blue" %)**TCXO crystal**(%%) which ensures the module can achieve stable performance in extreme temperatures.
311 -)))
279 +[[image:image-20220813173738-1.png]]
312 312  
313 313  
314 -== 3.2  Features ==
315 315  
316 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
317 -* Ultra-long RF range
318 -* Support LoRaWAN v1.0.4 protocol
319 -* Support peer-to-peer protocol
320 -* TCXO crystal to ensure RF performance on low temperature
321 -* Spring RF antenna
322 -* Available in different frequency LoRaWAN frequency bands.
323 -* World-wide unique OTAA keys.
324 -* AT Command via UART-TTL interface
325 -* Firmware upgradable via UART interface
283 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
326 326  
327 327  
328 -== 3.3  Specification ==
286 +Function and page introduction
329 329  
330 -* CPU: 32-bit 48 MHz
331 -* Flash: 256KB
332 -* RAM: 64KB
333 -* Input Power Range: 5v
334 -* Frequency Range: 150 MHz ~~ 960 MHz
335 -* Maximum Power +22 dBm constant RF output
336 -* High sensitivity: -148 dBm
337 -* Temperature:
338 -** Storage: -55 ~~ +125℃
339 -** Operating: -40 ~~ +85℃
340 -* Humidity:
341 -** Storage: 5 ~~ 95% (Non-Condensing)
342 -** Operating: 10 ~~ 95% (Non-Condensing)
343 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
344 -* LoRa Rx current: <9 mA
345 345  
289 +[[image:image-20220723113448-7.png||height="995" width="450"]]
346 346  
347 -== 3.4  Pin Mapping & LED ==
348 348  
292 +(% style="color:blue" %)**Block Explain:**
349 349  
294 +1.  Display LA66 USB LoRaWAN Module connection status
350 350  
351 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
296 +2.  Check and reconnect
352 352  
298 +3.  Turn send timestamps on or off
353 353  
354 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
300 +4.  Display LoRaWan connection status
355 355  
302 +5.  Check LoRaWan connection status
356 356  
357 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
304 +6.  The RSSI value of the node when the ACK is received
358 358  
306 +7.  Node's Signal Strength Icon
359 359  
360 -[[image:image-20220602171217-1.png||height="538" width="800"]]
308 +8.  Configure Location Uplink Interval
361 361  
310 +9.  AT command input box
362 362  
363 -Open the serial port tool
312 +10.  Send Button:  Send input box info to LA66 USB Adapter
364 364  
365 -[[image:image-20220602161617-8.png]]
314 +11.  Output Log from LA66 USB adapter
366 366  
367 -[[image:image-20220602161718-9.png||height="457" width="800"]]
316 +12.  clear log button
368 368  
318 +13.  exit button
369 369  
370 370  
371 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
372 372  
373 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
322 +LA66 USB LoRaWAN Module not connected
374 374  
375 375  
376 -[[image:image-20220602161935-10.png||height="498" width="800"]]
325 +[[image:image-20220723110520-5.png||height="677" width="508"]]
377 377  
378 378  
379 379  
380 -(% style="color:blue" %)**3. See Uplink Command**
329 +Connect LA66 USB LoRaWAN Module
381 381  
382 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
383 383  
384 -example: AT+SENDB=01,02,8,05820802581ea0a5
332 +[[image:image-20220723110626-6.png||height="681" width="511"]]
385 385  
386 -[[image:image-20220602162157-11.png||height="497" width="800"]]
387 387  
335 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
388 388  
389 389  
390 -(% style="color:blue" %)**4. Check to see if TTN received the message**
338 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
391 391  
392 -[[image:image-20220602162331-12.png||height="420" width="800"]]
393 393  
341 +[[image:image-20220723134549-8.png]]
394 394  
395 395  
396 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
397 397  
345 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
398 398  
399 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
400 400  
348 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
401 401  
402 -(% style="color:red" %)**Preconditions:**
350 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
403 403  
404 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
352 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
405 405  
406 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
354 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
407 407  
408 408  
357 +Example output in NodeRed is as below:
409 409  
410 -(% style="color:blue" %)**Steps for usage:**
359 +[[image:image-20220723144339-1.png]]
411 411  
412 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
413 413  
414 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
362 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
415 415  
416 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
417 417  
365 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
418 418  
367 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
419 419  
420 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
369 +(% style="color:red" %)**Notice: If upgrade via USB hub is not sucessful. try to connect to PC directly.**
421 421  
371 +[[image:image-20220723150132-2.png]]
422 422  
423 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
424 424  
425 425  
426 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
375 +=== (% style="color:blue" %)**Open the Upgrade tool (Tremo Programmer) in PC and Upgrade** (%%) ===
427 427  
428 -[[image:image-20220602171233-2.png||height="538" width="800"]]
429 429  
378 +**1.  Software download link:  [[https:~~/~~/www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0>>url:https://www.dropbox.com/sh/j0qyc7a9ejit7jk/AACtx2tK4gEv6YFXMIVUM4dLa?dl=0]]**
430 430  
380 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103227-6.png?rev=1.1||alt="image-20220602103227-6.png"]]
431 431  
432 -(% style="color:blue" %)**2. Install Minicom in RPi.**
382 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103357-7.png?rev=1.1||alt="image-20220602103357-7.png"]]
433 433  
434 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
435 435  
436 - (% style="background-color:yellow" %)**apt update**
385 +**2.  Select the COM port corresponding to USB TTL**
437 437  
438 - (% style="background-color:yellow" %)**apt install minicom**
387 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602103844-8.png?rev=1.1||alt="image-20220602103844-8.png"]]
439 439  
440 440  
441 -Use minicom to connect to the RPI's terminal
390 +**3.  Select the bin file to burn**
442 442  
443 -[[image:image-20220602153146-3.png||height="439" width="500"]]
392 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104144-9.png?rev=1.1||alt="image-20220602104144-9.png"]]
444 444  
394 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104251-10.png?rev=1.1||alt="image-20220602104251-10.png"]]
445 445  
396 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104402-11.png?rev=1.1||alt="image-20220602104402-11.png"]]
446 446  
447 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
448 448  
449 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
399 +**4.  Click to start the download**
450 450  
401 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104923-13.png?rev=1.1||alt="image-20220602104923-13.png"]]
451 451  
452 -[[image:image-20220602154928-5.png||height="436" width="500"]]
453 453  
404 +**5.  Check update process**
454 454  
406 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602104948-14.png?rev=1.1||alt="image-20220602104948-14.png"]]
455 455  
456 -(% style="color:blue" %)**4. Send Uplink message**
457 457  
458 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
409 +**The following picture shows that the burning is successful**
459 459  
460 -example: AT+SENDB=01,02,8,05820802581ea0a5
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220602105251-15.png?rev=1.1||alt="image-20220602105251-15.png"]]
461 461  
462 462  
463 -[[image:image-20220602160339-6.png||height="517" width="600"]]
414 += 2.  FAQ =
464 464  
416 +== 2.1  How to Compile Source Code for LA66? ==
465 465  
466 466  
467 -Check to see if TTN received the message
419 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
468 468  
469 -[[image:image-20220602160627-7.png||height="369" width="800"]]
470 470  
422 +== 2.2  Where to find Peer-to-Peer firmware of LA66? ==
471 471  
472 472  
473 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
425 +Instruction for LA66 Peer to Peer firmware :[[ Instruction >>doc:Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Shield User Manual.Instruction for LA66 Peer to Peer firmware.WebHome]]
474 474  
475 475  
428 +== 2.3 My device keeps showing invalid credentials, the device goes into low power mode ==
476 476  
477 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
478 478  
431 +Set the AT+COMMAND: (% style="color:blue" %)**AT+UUID=666666666666**
479 479  
480 480  
434 += 3.  Order Info =
481 481  
482 -= 4.  Order Info =
483 483  
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
484 484  
485 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
486 486  
487 -
488 488  (% style="color:blue" %)**XXX**(%%): The default frequency band
489 489  
490 490  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -498,8 +498,38 @@
498 498  * (% style="color:red" %)**PP**(%%):  Peer to Peer LoRa Protocol
499 499  
500 500  
501 -= 5.  Reference =
453 += 4.  Reference =
502 502  
503 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
504 504  
456 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
457 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
458 +
459 +
460 += 5.  FCC Statement =
461 +
462 +
463 +(% style="color:red" %)**FCC Caution:**
464 +
465 +Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
466 +
467 +This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
468 +
469 +
470 +(% style="color:red" %)**IMPORTANT NOTE: **
471 +
472 +(% style="color:red" %)**Note:**(%%) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 +
474 +—Reorient or relocate the receiving antenna.
475 +
476 +—Increase the separation between the equipment and receiver.
477 +
478 +—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
479 +
480 +—Consult the dealer or an experienced radio/TV technician for help.
481 +
482 +
483 +(% style="color:red" %)**FCC Radiation Exposure Statement: **
484 +
485 +This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
486 +
505 505  
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0