Last modified by Mengting Qiu on 2024/04/01 17:22
<
From version < 88.1 >
edited by Edwin Chen
on 2022/07/15 00:02
To version < 157.2 >
edited by Xiaoling
on 2022/09/12 08:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -LA66 LoRaWAN Module
1 +LA66 USB LoRaWAN Adapter User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -6,18 +6,23 @@
6 6  
7 7  
8 8  
9 -= 1.  LA66 LoRaWAN Module =
10 10  
11 11  
12 -== 1.1  What is LA66 LoRaWAN Module ==
11 += 1.  LA66 USB LoRaWAN Adapter =
13 13  
14 14  
14 +== 1.1  Overview ==
15 +
16 +
17 +[[image:image-20220715001142-3.png||height="145" width="220"]]
18 +
19 +
15 15  (((
16 -(% style="color:blue" %)**Dragino LA66**(%%) is a small wireless LoRaWAN module that offers a very compelling mix of long-range, low power consumption, and secure data transmission. It is designed to facilitate developers to quickly deploy industrial-level LoRaWAN and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to create and connect your things everywhere.
21 +(% style="color:blue" %)**LA66 USB LoRaWAN Adapter**(%%) is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
17 17  )))
18 18  
19 19  (((
20 -(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.4 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
25 +(% style="color:blue" %)**LA66**(%%) is a ready-to-use module that includes the (% style="color:blue" %)**LoRaWAN v1.0.3 protocol**(%%). The LoRaWAN stack used in LA66 is used in more than 1 million LoRaWAN End Devices deployed world widely. This mature LoRaWAN stack greatly reduces the risk to make stable LoRaWAN Sensors to support different LoRaWAN servers and different countries' standards. External MCU can use AT command to call LA66 and start to transmit data via the LoRaWAN protocol.
21 21  )))
22 22  
23 23  (((
... ... @@ -33,27 +33,32 @@
33 33  )))
34 34  
35 35  
41 +
36 36  == 1.2  Features ==
37 37  
44 +
45 +* LoRaWAN USB adapter base on LA66 LoRaWAN module
46 +* Ultra-long RF range
38 38  * Support LoRaWAN v1.0.4 protocol
39 39  * Support peer-to-peer protocol
40 40  * TCXO crystal to ensure RF performance on low temperature
41 -* SMD Antenna pad and i-pex antenna connector
50 +* Spring RF antenna
42 42  * Available in different frequency LoRaWAN frequency bands.
43 43  * World-wide unique OTAA keys.
44 44  * AT Command via UART-TTL interface
45 45  * Firmware upgradable via UART interface
46 -* Ultra-long RF range
55 +* Open Source Mobile App for LoRaWAN signal detect and GPS tracking.
47 47  
48 48  
49 49  
59 +
50 50  == 1.3  Specification ==
51 51  
62 +
52 52  * CPU: 32-bit 48 MHz
53 53  * Flash: 256KB
54 54  * RAM: 64KB
55 -* Input Power Range: 1.8v ~~ 3.7v
56 -* Power Consumption: < 4uA.
66 +* Input Power Range: 5v
57 57  * Frequency Range: 150 MHz ~~ 960 MHz
58 58  * Maximum Power +22 dBm constant RF output
59 59  * High sensitivity: -148 dBm
... ... @@ -65,395 +65,368 @@
65 65  ** Operating: 10 ~~ 95% (Non-Condensing)
66 66  * LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
67 67  * LoRa Rx current: <9 mA
68 -* I/O Voltage: 3.3v
69 69  
70 70  
71 71  
72 -== 1.4  AT Command ==
73 73  
74 -AT Command is valid over Main TXD and Main RXD. Serial Baud Rate is 9600. AT commands can be found in AT Command documents.
82 +== 1.4  Pin Mapping & LED ==
75 75  
76 76  
77 -== 1.5  Dimension ==
85 +[[image:image-20220813183239-3.png||height="526" width="662"]]
78 78  
79 -[[image:image-20220517072526-1.png]]
80 80  
81 81  
89 +== 1.5  Example: Send & Get Messages via LoRaWAN in PC ==
82 82  
83 -== 1.6  Pin Mapping ==
84 84  
92 +(((
93 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
94 +)))
85 85  
86 -[[image:image-20220523101537-1.png]]
87 87  
97 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN adapter to PC**
88 88  
89 89  
90 -== 1.7  Land Pattern ==
100 +[[image:image-20220723100027-1.png]]
91 91  
92 -[[image:image-20220517072821-2.png]]
93 93  
103 +Open the serial port tool
94 94  
105 +[[image:image-20220602161617-8.png]]
95 95  
96 -= 2.  LA66 LoRaWAN Shield =
97 97  
108 +[[image:image-20220602161718-9.png||height="457" width="800"]]
98 98  
99 -== 2.1  Overview ==
100 100  
101 -LA66 LoRaWAN Shield is the Arduino shield base on LA66. Users can use LA66 LoRaWAN Shield to rapidly add LoRaWAN or peer-to-peer LoRa wireless function to  Arduino projects.
102 102  
112 +(% style="color:blue" %)**2.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
103 103  
104 -== 2.2  Features ==
105 105  
106 -* Arduino Shield base on LA66 LoRaWAN module
107 -* Support LoRaWAN v1.0.4 protocol
108 -* Support peer-to-peer protocol
109 -* TCXO crystal to ensure RF performance on low temperature
110 -* SMA connector
111 -* Available in different frequency LoRaWAN frequency bands.
112 -* World-wide unique OTAA keys.
113 -* AT Command via UART-TTL interface
114 -* Firmware upgradable via UART interface
115 -* Ultra-long RF range
115 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
116 116  
117 117  
118 +[[image:image-20220602161935-10.png||height="498" width="800"]]
118 118  
119 -== 2.3  Specification ==
120 120  
121 -* CPU: 32-bit 48 MHz
122 -* Flash: 256KB
123 -* RAM: 64KB
124 -* Input Power Range: 1.8v ~~ 3.7v
125 -* Power Consumption: < 4uA.
126 -* Frequency Range: 150 MHz ~~ 960 MHz
127 -* Maximum Power +22 dBm constant RF output
128 -* High sensitivity: -148 dBm
129 -* Temperature:
130 -** Storage: -55 ~~ +125℃
131 -** Operating: -40 ~~ +85℃
132 -* Humidity:
133 -** Storage: 5 ~~ 95% (Non-Condensing)
134 -** Operating: 10 ~~ 95% (Non-Condensing)
135 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
136 -* LoRa Rx current: <9 mA
137 -* I/O Voltage: 3.3v
138 138  
122 +(% style="color:blue" %)**3.  See Uplink Command**
139 139  
140 140  
141 -== 2.4  Pin Mapping & LED ==
125 +Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
142 142  
127 +example: AT+SENDB=01,02,8,05820802581ea0a5
143 143  
129 +[[image:image-20220602162157-11.png||height="497" width="800"]]
144 144  
145 -== 2.5  Example: Use AT Command to communicate with LA66 module via Arduino UNO. ==
146 146  
147 147  
133 +(% style="color:blue" %)**4.  Check to see if TTN received the message**
148 148  
149 -== 2.6  Example: Join TTN network and send an uplink message, get downlink message. ==
150 150  
136 +[[image:image-20220817093644-1.png]]
151 151  
152 152  
153 -== 2.7  Example: Log Temperature Sensor(DHT11) and send data to TTN, show it in DataCake. ==
154 154  
140 +== 1.6  Example: How to join helium ==
155 155  
156 156  
157 -== 2.8  Upgrade Firmware of LA66 LoRaWAN Shield ==
158 158  
144 +(% style="color:blue" %)**1.  Create a new device.**
159 159  
160 -=== 2.8.1  Items needed for update ===
161 161  
162 -1. LA66 LoRaWAN Shield
163 -1. Arduino
164 -1. USB TO TTL Adapter
147 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165500-1.png?width=940&height=464&rev=1.1||alt="image-20220907165500-1.png"]]
165 165  
166 166  
167 167  
151 +(% style="color:blue" %)**2.  Save the device after filling in the necessary information.**
168 168  
169 -[[image:image-20220602100052-2.png||height="385" width="600"]]
170 170  
154 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907165837-2.png?width=809&height=375&rev=1.1||alt="image-20220907165837-2.png" height="375" width="809"]]
171 171  
172 -=== 2.8.2  Connection ===
173 173  
174 174  
175 -[[image:image-20220602101311-3.png||height="276" width="600"]]
158 +(% style="color:blue" %)**3.  Use AT commands.**
176 176  
177 177  
178 -(((
179 -(% style="color:blue" %)**LA66 LoRaWAN Shield**(%%)  **<->** (% style="color:blue" %)**USB TTL**
180 -)))
161 +[[image:image-20220909151441-1.jpeg||height="695" width="521"]]
181 181  
182 -(((
183 -(% style="background-color:yellow" %)**GND  <-> GND
184 -TXD  <->  TXD
185 -RXD  <->  RXD**
186 -)))
187 187  
188 188  
189 -Put a jumper cap on JP6 of LA66 LoRaWAN Shield. ( the jumper is to power on LA66 module)
165 +(% style="color:blue" %)**4.  Use the serial port tool**
190 190  
191 -Connect USB TTL Adapter to PC after connecting the wires
192 192  
168 +[[image:image-20220909151517-2.png||height="543" width="708"]]
193 193  
194 -[[image:image-20220602102240-4.png||height="304" width="600"]]
195 195  
196 196  
197 -=== 2.8.3  Upgrade steps ===
172 +(% style="color:blue" %)**5.  Use command AT+CFG to get device configuration**
198 198  
199 199  
200 -==== 1.  Switch SW1 to put in ISP position ====
175 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170308-3.png?width=617&height=556&rev=1.1||alt="image-20220907170308-3.png" height="556" width="617"]]
201 201  
202 202  
203 -[[image:image-20220602102824-5.png||height="306" width="600"]]
204 204  
179 +(% style="color:blue" %)**6.  Network successfully.**
205 205  
206 206  
207 -==== 2.  Press the RST switch once ====
182 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170436-4.png?rev=1.1||alt="image-20220907170436-4.png"]]
208 208  
209 209  
210 -[[image:image-20220602104701-12.png||height="285" width="600"]]
211 211  
186 +(% style="color:blue" %)**7.  Send uplink using command**
212 212  
213 213  
214 -==== 3.  Open the Upgrade tool (Tremo Programmer) in PC and Upgrade ====
189 +[[image:image-20220912085244-1.png]]
215 215  
216 216  
217 -(((
218 -(% style="color:blue" %)**1. Software download link:  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/>>https://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/Utility/LSN50N/]]**
219 -)))
192 +[[image:image-20220912085307-2.png]]
220 220  
221 221  
222 -[[image:image-20220602103227-6.png]]
223 223  
196 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/WebHome/image-20220907170744-6.png?width=798&height=242&rev=1.1||alt="image-20220907170744-6.png" height="242" width="798"]]
224 224  
225 -[[image:image-20220602103357-7.png]]
226 226  
227 227  
200 +== 1.7  Example: Send PC's CPU/RAM usage to TTN via python ==
228 228  
229 -(% class="wikigeneratedid" id="HSelecttheCOMportcorrespondingtoUSBTTL" %)
230 -(% style="color:blue" %)**2. Select the COM port corresponding to USB TTL**
231 231  
203 +**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
232 232  
233 -[[image:image-20220602103844-8.png]]
205 +(**Raspberry Pi example: **[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_Raspberry%20Pi.py]])
234 234  
235 235  
208 +(% style="color:red" %)**Preconditions:**
236 236  
237 -(% class="wikigeneratedid" id="HSelectthebinfiletoburn" %)
238 -(% style="color:blue" %)**3. Select the bin file to burn**
210 +(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
239 239  
212 +(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
240 240  
241 -[[image:image-20220602104144-9.png]]
242 242  
243 243  
244 -[[image:image-20220602104251-10.png]]
216 +(% style="color:blue" %)**Steps for usage:**
245 245  
218 +(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
246 246  
247 -[[image:image-20220602104402-11.png]]
220 +(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
248 248  
249 249  
223 +[[image:image-20220602115852-3.png||height="450" width="1187"]]
250 250  
251 -(% class="wikigeneratedid" id="HClicktostartthedownload" %)
252 -(% style="color:blue" %)**4. Click to start the download**
253 253  
254 -[[image:image-20220602104923-13.png]]
255 255  
227 +== 1.8  Example: Send & Get Messages via LoRaWAN in RPi ==
256 256  
257 257  
258 -(% class="wikigeneratedid" id="HThefollowingfigureappearstoprovethattheburningisinprogress" %)
259 -(% style="color:blue" %)**5. Check update process**
230 +Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
260 260  
261 261  
262 -[[image:image-20220602104948-14.png]]
233 +(% style="color:blue" %)**1.  Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
263 263  
264 264  
236 +[[image:image-20220723100439-2.png]]
265 265  
266 -(% class="wikigeneratedid" id="HThefollowingpictureappearstoprovethattheburningissuccessful" %)
267 -(% style="color:blue" %)**The following picture shows that the burning is successful**
268 268  
269 -[[image:image-20220602105251-15.png]]
270 270  
240 +(% style="color:blue" %)**2.  Install Minicom in RPi.**
271 271  
272 272  
273 -= 3.  LA66 USB LoRaWAN Adapter =
243 +(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
274 274  
245 + (% style="background-color:yellow" %)**apt update**
275 275  
276 -== 3.1  Overview ==
247 + (% style="background-color:yellow" %)**apt install minicom**
277 277  
278 -LA66 USB LoRaWAN Adapter is designed to fast turn USB devices to support LoRaWAN wireless features. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface.
279 279  
250 +Use minicom to connect to the RPI's terminal
280 280  
281 -== 3.2  Features ==
252 +[[image:image-20220602153146-3.png||height="439" width="500"]]
282 282  
283 -* LoRaWAN USB adapter base on LA66 LoRaWAN module
284 -* Ultra-long RF range
285 -* Support LoRaWAN v1.0.4 protocol
286 -* Support peer-to-peer protocol
287 -* TCXO crystal to ensure RF performance on low temperature
288 -* Spring RF antenna
289 -* Available in different frequency LoRaWAN frequency bands.
290 -* World-wide unique OTAA keys.
291 -* AT Command via UART-TTL interface
292 -* Firmware upgradable via UART interface
293 293  
294 294  
256 +(% style="color:blue" %)**3.  Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
295 295  
296 -== 3.3  Specification ==
297 297  
298 -* CPU: 32-bit 48 MHz
299 -* Flash: 256KB
300 -* RAM: 64KB
301 -* Input Power Range: 5v
302 -* Frequency Range: 150 MHz ~~ 960 MHz
303 -* Maximum Power +22 dBm constant RF output
304 -* High sensitivity: -148 dBm
305 -* Temperature:
306 -** Storage: -55 ~~ +125℃
307 -** Operating: -40 ~~ +85℃
308 -* Humidity:
309 -** Storage: 5 ~~ 95% (Non-Condensing)
310 -** Operating: 10 ~~ 95% (Non-Condensing)
311 -* LoRa Tx Current: <90 mA at +17 dBm, 108 mA at +22 dBm
312 -* LoRa Rx current: <9 mA
259 +The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
313 313  
314 314  
262 +[[image:image-20220602154928-5.png||height="436" width="500"]]
315 315  
316 -== 3.4  Pin Mapping & LED ==
317 317  
318 318  
266 +(% style="color:blue" %)**4.  Send Uplink message**
319 319  
320 -== 3.5  Example: Send & Get Messages via LoRaWAN in PC ==
321 321  
269 +Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
322 322  
323 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
271 +example: AT+SENDB=01,02,8,05820802581ea0a5
324 324  
325 325  
326 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN adapter to PC**
274 +[[image:image-20220602160339-6.png||height="517" width="600"]]
327 327  
328 328  
329 -[[image:image-20220602171217-1.png||height="538" width="800"]]
330 330  
278 +Check to see if TTN received the message
331 331  
332 -Open the serial port tool
333 333  
334 -[[image:image-20220602161617-8.png]]
281 +[[image:image-20220602160627-7.png||height="369" width="800"]]
335 335  
336 -[[image:image-20220602161718-9.png||height="457" width="800"]]
337 337  
338 338  
285 +== 1.9  Example: Use of LA66 USB LoRaWAN Adapter and mobile APP ==
339 339  
340 -(% style="color:blue" %)**2. Press the reset switch RST on the LA66 USB LoRaWAN Adapter to reset it.**
341 341  
342 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully Join the LoRaWAN network
288 +=== 1.9.1  Hardware and Software Connection ===
343 343  
344 344  
345 -[[image:image-20220602161935-10.png||height="498" width="800"]]
346 346  
292 +==== (% style="color:blue" %)**Overview：**(%%) ====
347 347  
348 348  
349 -(% style="color:blue" %)**3. See Uplink Command**
295 +(((
296 +DRAGINO-LA66-APP is an Open Source mobile APP for LA66 USB LoRaWAN Adapter. DRAGINO-LA66-APP has below features:
350 350  
351 -Command format: (% style="color:#4472c4" %)** AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
298 +* Send real-time location information of mobile phone to LoRaWAN network.
299 +* Check LoRaWAN network signal strengh.
300 +* Manually send messages to LoRaWAN network.
301 +)))
352 352  
353 -example: AT+SENDB=01,02,8,05820802581ea0a5
354 354  
355 -[[image:image-20220602162157-11.png||height="497" width="800"]]
356 356  
357 357  
358 358  
359 -(% style="color:blue" %)**4. Check to see if TTN received the message**
307 +==== (% style="color:blue" %)**Hardware Connection:**(%%) ====
360 360  
361 -[[image:image-20220602162331-12.png||height="420" width="800"]]
362 362  
310 +A USB to Type-C adapter is needed to connect to a Mobile phone.
363 363  
312 +Note: The package of LA66 USB adapter already includes this USB Type-C adapter.
364 364  
365 -== 3.6  Example: Send PC's CPU/RAM usage to TTN via python ==
314 +[[image:image-20220813174353-2.png||height="360" width="313"]]
366 366  
367 367  
368 -**Use python as an example：**[[https:~~/~~/github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py>>https://github.com/dragino/LA66/blob/main/Send_information_to_TTN_WindosPC.py]]
369 369  
370 370  
371 -(% style="color:red" %)**Preconditions:**
319 +==== (% style="color:blue" %)**Download and Install App:**(%%) ====
372 372  
373 -(% style="color:red" %)**1. LA66 USB LoRaWAN Adapter works fine**
374 374  
375 -(% style="color:red" %)**2. LA66 USB LoRaWAN Adapter  is registered with TTN**
322 +[[(% id="cke_bm_895007S" style="display:none" %)** **(%%)**Download Link for Android apk **>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]].  (Android Version Only)
376 376  
377 377  
325 +[[image:image-20220813173738-1.png]]
378 378  
379 -(% style="color:blue" %)**Steps for usage:**
380 380  
381 -(% style="color:blue" %)**1.**(%%) Press the reset switch RESET on the LA66 USB LoRaWAN Adapter
382 382  
383 -(% style="color:blue" %)**2.**(%%) Run the python script in PC and see the TTN
384 384  
385 -[[image:image-20220602115852-3.png||height="450" width="1187"]]
330 +==== (% style="color:blue" %)**Use of APP:**(%%) ====
386 386  
387 387  
333 +Function and page introduction
388 388  
389 -== 3.7  Example: Send & Get Messages via LoRaWAN in RPi ==
390 390  
336 +[[image:image-20220723113448-7.png||height="995" width="450"]]
391 391  
392 -Assume user already input the LA66 USB LoRaWAN Adapter OTAA Keys in TTN and there is already TTN network coverage.
393 393  
339 +**Block Explain:**
394 394  
395 -(% style="color:blue" %)**1. Connect the LA66 USB LoRaWAN Adapter to the Raspberry Pi**
341 +1.  Display LA66 USB LoRaWAN Module connection status
396 396  
397 -[[image:image-20220602171233-2.png||height="538" width="800"]]
343 +2.  Check and reconnect
398 398  
345 +3.  Turn send timestamps on or off
399 399  
347 +4.  Display LoRaWan connection status
400 400  
401 -(% style="color:blue" %)**2. Install Minicom in RPi.**
349 +5.  Check LoRaWan connection status
402 402  
403 -(% id="cke_bm_509388S" style="display:none" %) (%%)Enter the following command in the RPi terminal
351 +6.  The RSSI value of the node when the ACK is received
404 404  
405 - (% style="background-color:yellow" %)**apt update**
353 +7.  Node's Signal Strength Icon
406 406  
407 - (% style="background-color:yellow" %)**apt install minicom**
355 +8.  Configure Location Uplink Interval
408 408  
357 +9.  AT command input box
409 409  
410 -Use minicom to connect to the RPI's terminal
359 +10.  Send Button:  Send input box info to LA66 USB Adapter
411 411  
412 -[[image:image-20220602153146-3.png||height="439" width="500"]]
361 +11.  Output Log from LA66 USB adapter
413 413  
363 +12.  clear log button
414 414  
365 +13.  exit button
415 415  
416 -(% style="color:blue" %)**3. Press the reset switch RST on the LA66 USB LoRaWAN Adapter.**
417 417  
418 -The following picture appears to prove that the LA66 USB LoRaWAN Adapter successfully entered the network.
419 419  
369 +LA66 USB LoRaWAN Module not connected
420 420  
421 -[[image:image-20220602154928-5.png||height="436" width="500"]]
422 422  
372 +[[image:image-20220723110520-5.png||height="677" width="508"]]
423 423  
424 424  
425 -(% style="color:blue" %)**4. Send Uplink message**
426 426  
427 -Format: (% style="color:#4472c4" %)**AT+SENDB=<confirn_status>,<Fport>,<data_len>,<data>**
376 +Connect LA66 USB LoRaWAN Module
428 428  
429 -example: AT+SENDB=01,02,8,05820802581ea0a5
430 430  
379 +[[image:image-20220723110626-6.png||height="681" width="511"]]
431 431  
432 -[[image:image-20220602160339-6.png||height="517" width="600"]]
433 433  
434 434  
435 435  
436 -Check to see if TTN received the message
384 +=== 1.9.2  Send data to TTNv3 and plot location info in Node-Red ===
437 437  
438 -[[image:image-20220602160627-7.png||height="369" width="800"]]
439 439  
387 +(% style="color:blue" %)**1.  Register LA66 USB LoRaWAN Module to TTNV3**
440 440  
441 441  
442 -== 3.8  Example: LA66 USB Module got a message from LA66 LoRa Shield and send the sensor data to NodeRed. ==
390 +[[image:image-20220723134549-8.png]]
443 443  
444 444  
445 445  
446 -== 3.9  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
394 +(% style="color:blue" %)**2.  Open Node-RED,And import the JSON file to generate the flow**
447 447  
448 448  
397 +Sample JSON file please go to **[[this link>>https://www.dropbox.com/sh/zxwx16qb777uvkz/AABE_P8coGCQ4DAC8enH4bUya?dl=0]]** to download.
449 449  
399 +For the usage of Node-RED, please refer to: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]]
450 450  
451 -= 4.  Order Info =
401 +After see LoRaWAN Online, walk around and the APP will keep sending location info to LoRaWAN server and then to the Node Red.
452 452  
403 +LA66~-~-node-red~-~-decoder:[[dragino-end-node-decoder/Node-RED at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/tree/main/Node-RED]]
453 453  
454 -**Part Number:**  (% style="color:blue" %)**LA66-XXX**(%%), (% style="color:blue" %)**LA66-LoRaWAN-Shield-XXX** (%%) **or**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
455 455  
406 +Example output in NodeRed is as below:
456 456  
408 +[[image:image-20220723144339-1.png]]
409 +
410 +
411 +
412 +== 1.10  Upgrade Firmware of LA66 USB LoRaWAN Adapter ==
413 +
414 +
415 +The LA66 USB LoRaWAN Adapter is the same as the LA66 LoRaWAN Shield update method.
416 +
417 +Just use the yellow jumper cap to short the BOOT corner and the RX corner, and then press the RESET button (without the jumper cap, you can directly short the BOOT corner and the RX corner with a wire to achieve the same effect).
418 +
419 +
420 +[[image:image-20220723150132-2.png]]
421 +
422 +
423 +
424 += 2.  FAQ =
425 +
426 +
427 +== 2.1  How to Compile Source Code for LA66? ==
428 +
429 +
430 +Compile and Upload Code to ASR6601 Platform ：[[Instruction>>Main.User Manual for LoRaWAN End Nodes.LA66 LoRaWAN Module.Compile and Upload Code to ASR6601 Platform.WebHome]]
431 +
432 +
433 +
434 += 3.  Order Info =
435 +
436 +
437 +**Part Number:**  (% style="color:blue" %)**LA66-USB-LoRaWAN-Adapter-XXX**
438 +
439 +
457 457  (% style="color:blue" %)**XXX**(%%): The default frequency band
458 458  
459 459  * (% style="color:red" %)**AS923**(%%):  LoRaWAN AS923 band
... ... @@ -468,8 +468,11 @@
468 468  
469 469  
470 470  
471 -= 5.  Reference =
472 472  
473 -* Hardware Design File for LA66 LoRaWAN Shield, LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
455 += 4.  Reference =
474 474  
457 +
458 +* Hardware Design File for LA66 USB LoRaWAN Adapter : [[Download>>https://www.dropbox.com/sh/a3wbmdcvqjxaqw5/AADZfvAiykJTK624RgMquH86a?dl=0]]
459 +* Mobile Phone App Source Code: [[Download>>https://github.com/dragino/LA66_Mobile_App]].
460 +
475 475  
image-20220715000826-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +820.7 KB
Content
image-20220715001142-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +508.1 KB
Content
image-20220718094030-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +193.3 KB
Content
image-20220718094138-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +100.3 KB
Content
image-20220718094750-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.9 KB
Content
image-20220718094950-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +97.7 KB
Content
image-20220718095457-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.0 KB
Content
image-20220719093156-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +381.2 KB
Content
image-20220719093358-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +649.5 KB
Content
image-20220720111850-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +380.3 KB
Content
image-20220723100027-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20220723100439-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +749.8 KB
Content
image-20220723102027-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +28.7 KB
Content
image-20220723104754-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +231.5 KB
Content
image-20220723110520-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
image-20220723110626-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +3.6 MB
Content
image-20220723113448-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +298.5 KB
Content
image-20220723134549-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +392.3 KB
Content
image-20220723144339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +324.7 KB
Content
image-20220723150132-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +698.8 KB
Content
image-20220723165950-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +278.4 KB
Content
image-20220723170210-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +883.0 KB
Content
image-20220723170545-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20220723170750-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +119.0 KB
Content
image-20220723171228-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
image-20220723172235-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +262.3 KB
Content
image-20220723172502-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.0 KB
Content
image-20220723172938-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +104.8 KB
Content
image-20220723173341-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +117.9 KB
Content
image-20220723173950-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20220723175700-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +96.4 KB
Content
image-20220726135239-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.4 KB
Content
image-20220726135356-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.6 KB
Content
image-20220813173738-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.2 KB
Content
image-20220813174353-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +189.1 KB
Content
image-20220813183239-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +642.4 KB
Content
image-20220814101457-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +913.4 KB
Content
image-20220817084245-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +317.6 KB
Content
image-20220817084532-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +174.9 KB
Content
image-20220817093644-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +217.0 KB
Content
image-20220909151441-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +152.4 KB
Content
image-20220909151517-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +64.3 KB
Content
image-20220912085244-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
image-20220912085307-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +16.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0